diff options
Diffstat (limited to 'vdr.5')
| -rw-r--r-- | vdr.5 | 44 |
1 files changed, 26 insertions, 18 deletions
@@ -8,7 +8,7 @@ .\" License as specified in the file COPYING that comes with the .\" vdr distribution. .\" -.\" $Id: vdr.5 2.26 2011/09/25 13:51:34 kls Exp $ +.\" $Id: vdr.5 2.27 2012/01/11 13:16:57 kls Exp $ .\" .TH vdr 5 "10 Feb 2008" "1.6" "Video Disk Recorder Files" .SH NAME @@ -87,32 +87,33 @@ meaning (and allowed values) are .TS tab (@); l l. -\fBB\fR@Bandwidth (6, 7, 8) +\fBB\fR@Bandwidth (1712, 5, 6, 7, 8, 10) \fBC\fR@Code rate high priority (0, 12, 23, 34, 35, 45, 56, 67, 78, 89, 910) \fBD\fR@coDe rate low priority (0, 12, 23, 34, 35, 45, 56, 67, 78, 89, 910) -\fBG\fR@Guard interval (4, 8, 16, 32) +\fBG\fR@Guard interval (4, 8, 16, 32, 128, 19128, 19256) \fBH\fR@Horizontal polarization \fBI\fR@Inversion (0, 1) \fBL\fR@Left circular polarization \fBM\fR@Modulation (2, 5, 6, 10, 11, 16, 32, 64, 128, 256, 998) \fBO\fR@rollOff (0, 20, 25, 35) +\fBP\fR@Plp id (0-255) \fBR\fR@Right circular polarization \fBS\fR@delivery System (0, 1) -\fBT\fR@Transmission mode (2, 8) +\fBT\fR@Transmission mode (1, 2, 4, 8, 16, 32) \fBV\fR@Vertical polarization \fBY\fR@hierarchY (0, 1, 2, 4) .TE -\fBBandwidth:\fR The bandwidth of the channel in MHz (DVB-T only). +\fBBandwidth:\fR The bandwidth of the channel in MHz (1712 in kHz): (DVB-T/DVB-T2 only). -\fBCode rate high priority:\fR Forward Error Correction (FEC) of the high priority stream (DVB-T). +\fBCode rate high priority:\fR Forward Error Correction (FEC) of the high priority stream (DVB-T/DVB-T2). For DVB-S/DVB-S2 this parameter specifies the inner FEC scheme. 12 = 1/2, 23 = 2/3, 34 = 3/4, ... -\fBCode rate low priority:\fR Forward Error Correction (FEC) of the low priority stream (DVB-T only). +\fBCode rate low priority:\fR Forward Error Correction (FEC) of the low priority stream (DVB-T/DVB-T2 only). If no hierarchy is used, set to 0. -\fBGuard interval:\fR The guard interval value (DVB-T only): 4 = 1/4, 8 = 1/8, 16 = 1/16, 32 = 1/32. +\fBGuard interval:\fR The guard interval value (DVB-T only): 4 = 1/4, 8 = 1/8, 16 = 1/16, 32 = 1/32, 128 = 1/128, 19128 = 19/128, 19256 = 19/256. \fBInversion:\fR Specifies whether the DVB frontend needs spectral inversion (DVB-T and DVB-C only). This is frontend specific, if in doubt, omit. @@ -120,26 +121,30 @@ If no hierarchy is used, set to 0. .TS tab (@); l l. -\fB2\fR@QPSK (DVB-S, DVB-S2, DVB-T) +\fB2\fR@QPSK (DVB-S, DVB-S2, DVB-T, DVB-T2, ISDB-T) \fB5\fR@8PSK (DVB-S2) \fB6\fR@16APSK (DVB-S2) +\fB7\fR@32APSK (DVB-S2) \fB10\fR@VSB8 (ATSC aerial) \fB11\fR@VSB16 (ATSC aerial) -\fB16\fR@QAM16 (DVB-T) -\fB64\fR@QAM64 (DVB-C, DVB-T) +\fB12\fR@DQPSK (ISDB-T) +\fB16\fR@QAM16 (DVB-T, DVB-T2, ISDB-T) +\fB64\fR@QAM64 (DVB-C, DVB-T, DVB-T2, ISDB-T) \fB128\fR@QAM128 (DVB-C) -\fB256\fR@QAM256 (DVB-C) +\fB256\fR@QAM256 (DVB-C, DVB-T2) .TE \fBRolloff:\fR The Nyquist filter rolloff factor for DVB-S (\fB35\fR) and DVB-S2 (\fB35\fR, 25, 20), 35 = 0.35, 25 = 0.25, 20 = 0.20, DVB-S/DVB-S2 default value is 0.35 -\fBTransmission mode:\fR Number of DVB-T OFDM carriers, 8 = 8k, 2 = 2k. If in doubt, try 8k. +\fBPLP id:\fR Physical Layer Pipe (PLP) id (\fB0\fR-255) for DVB-T2 multiplex (DVB-T2 only). + +\fBTransmission mode:\fR Number of DVB-T OFDM carriers, 32 = 32k, 16 = 16k, 8 = 8k, 4 = 4k, 2 = 2k, 1 = 1k. If in doubt, try 8k. \fBHierarchy:\fR If set to 1, this transponder uses two streams, high priority and low priority. -If in doubt, try 0 (off). (DVB-T only). +If in doubt, try 0 (off). (DVB-T/DVB-T2 only). -\fBDelivery System:\fR The satellite delivery system (0 = DVB-S, 1 = DVB-S2). +\fBDelivery System:\fR The delivery system (0 = "first generation" (DVB-S/DVB-T), 1 = "second generation" (DVB-S2/DVB-T2). \fBPolarization:\fR Satellite antenna polarization. H = horizontal, V = vertical, R = circular right, L = circular left. @@ -152,16 +157,19 @@ The special value \fB999\fR is used for "automatic", which means the driver will automatically determine the proper value (if possible). An example of a parameter field for a DVB-T channel might look like this: -\fBB8C23D12G8M16T8Y0\fR +\fBB8C23D12G8M16T8Y0S0\fR + +An example of a parameter field for a DVB-T2 channel might look like this: +\fBB8C23D12G8M16T8Y0P0S1\fR An example of a parameter field for a DVB-C channel might look like this: \fBC0M64\fR An example of a parameter field for a DVB-S channel might look like this: -\fBhC56M2O35S0\fR +\fBHC56M2O35S0\fR An example of a parameter field for a DVB-S2 channel might look like this: -\fBhC910M2O35S1\fR +\fBHC910M2O35S1\fR Plugins that implement devices that need their own set of parameters may store those in the parameters string in arbitrary format (not necessarily |