From 87dd5139ff6666d64e7e343bcff632b342c4c814 Mon Sep 17 00:00:00 2001 From: Klaus Schmidinger Date: Sun, 7 Jan 2007 14:46:14 +0100 Subject: CAM handling refactored; multiple recordings with one CAM; automatic CAM selection --- MANUAL | 16 +++++++++------- 1 file changed, 9 insertions(+), 7 deletions(-) (limited to 'MANUAL') diff --git a/MANUAL b/MANUAL index 52c2a94e..3377fb0d 100644 --- a/MANUAL +++ b/MANUAL @@ -667,13 +667,15 @@ Version 1.4 Use DiSEqC = no Generally turns DiSEqC support on or off. - CICAM: - - CICAM DVBn m Shows the CAMs that each device contains, where 'n' is - the number of the device, and 'm' is the number of the - Common Interface slot of that device. The "Red" key - can be pressed to enter the CAM menu, and the "Green" key - triggers a reset of the selected CAM. + CAM: + + n CAM Name Shows the CAM slots that are present in this system, where + 'n' is the number of the slot, followed by the name of the + CAM. If a CAM slot is empty, '-' is displayed as name, and + if it is in the process of being reset, its current status + is displayed. The "Red" key can be pressed to enter the CAM + menu, and the "Green" key triggers a reset of the selected + slot. The "Ok" key also opens the CAM menu. Recording: -- cgit v1.2.3