From f9a3885ef2d21cef30180f2a90a0a305981a27c6 Mon Sep 17 00:00:00 2001 From: Klaus Schmidinger Date: Sun, 10 Mar 2002 12:45:58 +0100 Subject: New Setup parameter TrustedTransponder --- MANUAL | 18 ++++++++++++++++-- 1 file changed, 16 insertions(+), 2 deletions(-) (limited to 'MANUAL') diff --git a/MANUAL b/MANUAL index e322dbae..e5337b6d 100644 --- a/MANUAL +++ b/MANUAL @@ -415,9 +415,23 @@ Video Disk Recorder User's Manual SetSystemTime = 0 Defines whether the system time will be set according to the time received from the DVB data stream. 0 = system time will not be set - 1 = system time wil be set + 1 = system time will be set Note that this works only if VDR is running under a user - id that has permisson to set the system time. + id that has permisson to set the system time. You also + need to set the option TrustedTransponder to a channel + that you trust to transmit a reliable time base (not all + channels seem to have access to a correct time base...). + + TrustedTransponder = 0 The frequency of the transponder that shall be used to + set the system time. The Setup menu will offer the full + list of channels, even if several of them are on the + same transponder. Also, when selecting a channel, saving + the Setup and opening the Setup menu again, there may be + a different channel listed here, since the first one + in 'channels.conf' that is on the given transponder will + be taken. Note that in order to set the system time from + the transponder data the option SetSystemTime must also + be enabled. MarginStart = 2 Defines how many minutes before the official start time MarginStop = 10 of a broadcast VDR shall start recording, and how long -- cgit v1.2.3