Video Disk Recorder Revision History ------------------------------------ 2000-02-19: Version 0.01 - Initial revision. 2000-03-11: Version 0.02 - Fixed compilation with only DEBUG_REMOTE=1. - Menus now use colors. - Support for "Red", "Green", "Yellow", "Blue" buttons. - Channels and Timers can now be added, deleted and moved. - Basic record/play file handling support (no actual record/playback yet). 2000-04-15: Version 0.03 - Actual record/replay now works. - Dropped the idea of different "recording qualities" (a 36GB harddisk is able to store some 18 hours in full quality, so we don't really need that). - Termination signals are now caught and the program cleans up before exiting. - Support for CICAM. 2000-04-24: Version 0.04 - Changed name from 'osm' to 'vdr' to avoid mixups with the 'oms' program that appears to be in use with DVD replay. - Implemented a channel display in the top menu line. - Implemented replay progress display (press "Ok" when replaying to bring it up). - Implemented direct channel selecting by pressing the numeric keys. - Added several 'const' keywords to please stricter compilers. - The repeat function for the remote control no longer adapts dynamically to the timing of the RCU (this sometimes caused the repeat function to kick in too early). - Channel selection is now blocked when recording or replaying. - Improved process handling. 2000-05-27: Version 0.05 - Support for more than one DVB card. - Simultaneous record and replay (with two DVB cards). - Instant recordings no longer get the name "instant". They now get the name of the channel, with a prepended '@' character. - Timers that are not given an explicit Name now use the channel name with a prepended '@' character. - If an instant recording is currently active, the "Main" menu now contains an option to stop that recording. - Timers are now only processed when the Menu is not active. So after editing a timer the effect will take place only after the menu has been closed. In order to avoid missing a timer event by inadvertently leaving the menu open, the menu will be closed automatically after about two minutes of inactivity. - If a recording is currently being replayed, the "Main" menu now contains an option to stop replaying. - Displaying the recording DVB interface status in the decimal points of the RCU display. - Reduced the number of remote control keys. Modified the key assignments for the PC keyboard to better resemble the "up-down-left-right-ok" layout on menu controlling remote control units. 2000-07-25: Version 0.6 - Added support for LIRC remote control (thanks to Carsten Koch!). There are now three different remote control modes: KBD (PC-Keyboard), RCU and LIRC. See the INSTALL file for information on how to enable either of these modes. The default mode is now KBD, not RCU as before (to make it work immediately even if there is no actual remote control). - Fixed small bug in dvbapi.c that was causing some channels (many on hotbird) not to be correctly tuned (thanks to Plamen Ganev!). - Now clearing the replay buffer in search forward/back, which results in faster reaction. - The 'Recordings' menu is now listed alphabetically (thanks to Carsten Koch!). - The new 'epg2timers' tool (thanks to Carsten Koch!) can be used to convert an EPG "merkliste" page (http://www.tvtv.de) to vdr timer entries. - The new 'xtvrc2vdr' tool (thanks to Plamen Ganev!) can be used to convert 'xtvrc' channel files into 'vdr' format. - When more than one timer matches at the same time, the first one in the list with the highest 'Priority' is selected. - The MANUAL section on "Programming the Timer" has been filled in. - The year in the "Recordings" menu as well as in the progress display during replay has been reduced to 2 digits to allow more space for the recording's title. In the internal file structure the year is still stored with 4 digits, so there will be no problem at the next turn of the century ;-) - Channel names and timer filenames can now contain blanks. To avoid problems with file names that contain blanks, all blanks in recording file names are converted to underscores. - The polarization can now be given in uppercase or lowercase characters in 'channels.conf'. - Fixed buffer initialization to work with DVB driver version 0.6. - Implemented the "Simple Video Disk Recorder Protocol" (SVDRP) to control the VDR over a network connection. - Implemented command line option handling. - The program can now run in full background mode by using the --daemon option. - Added a "summary" field to the timers (thanks to Carsten Koch!). This field can contain a descriptive text of the programme and will be displayed when the "Blue" key is pressed on a recording that was created by this timer. If the text contains the special character '|', a newline will be inserted at that place. When pressing "Ok" on a timer that contains a summary field, the summary will be displayed. To edit such a timer the "Red" key must be pressed. Timers without a summary still go into Edit mode when pressing "Ok". The summary field can only be filled in directly by editing the 'timers.conf' file with a text editor, or by defining/modifying the timer via the SVDRP interface. 2000-08-06: Version 0.61 - When scrolling through a list it now moves a full page up or down when the cursor reaches the top or bottom of the menu (thanks to Heino Goldenstein!). - Added missing '#include ' to recording.c. - The video directory can now be defined with the command line option -v. - There can now be more than one video directory (in case you have several disks). - Fixed learning key codes for PC keyboard. - New command line option '-l' to set the log level. - Times in timers.conf are now always printed with 4 digits (leading '0'). - Slow forward/back mode (thanks to Guido Fiala!). - The "Up" key in replay mode no longer restarts replay at the very beginning, but rather resumes normal replay mode after a "pause", "forward" or "backward" operation. Use the "Skip -60s" function repeatedly to go back to the beginning of the recording. - Improved reaction on user input in fast/slow forward/back modes. - No more upper limit for the value of 'Pnr'. - Checking if the video card is really a DVB card. - New SVDRP command UPDT to update an existing timer (or add a new one if it doesn't yet exist). - New version of the 'epg2timers' tool (with a modified channel list). - Bugfix in closing window in DEBUG_OSD mode. 2000-09-03: Version 0.62 - The Makefile now defines DVBDIR to easily point to where the DVB driver source is located. - When switching channels the current/next information is now displayed if available (thanks to Robert Schneider). Since there is now more information to read when switching channels, the timeout for displaying it has been increased from 2 to 5 seconds (remember that this info can always be recalled by pressing the "Ok" button). For this feature to work it is necessary that the 'Pnr' parameter in the channel setup ('channels.conf') is set to the proper value. This has been done for some of the channels in the default 'channels.conf'. Some other parameters in the default 'channels.conf' have also been updated, so please make sure your timers still use the correct channels! 2000-09-10: Version 0.63 - The new "Setup" menu allows the user to configure several parameters to his/her personal taste (see MANUAL for details). - Workaround for a driver timing problem in cDvbApi::Cmd(), which sometimes caused the OSD to no longer be displayed (thanks to Niels de Carpentier). - Added the '-m486' option to the compiler call. - If a channel name contains a colon (':') it is now replaced with a '|' in 'channels.conf'. - Not everybody appears to like the "page scrolling" mechanism introduced by Heino Goldenstein in version 0.61, so this is now configurable via the "Setup" menu. - The new 'dvbrc2vdr' tool (thanks to Plamen Ganev!) can be used to convert 'dvbrc' channel files into 'vdr' format. - Channels can now be "grouped" (thanks to Plamen Ganev!). See MANUAL for details. There is currently no mechanism to define and maintain "Channel groups" via the menu, so you'll have to insert "Channel group" control lines into your 'channels.conf' file manually (for example with a text editor). - Started a new file named FORMATS with a description of the various file formats used by VDR. - The "Primary DVB interface" can now be chosen via the "Setup" menu. - Display of the "current/next" information when switching channels can now be disabled via the "Setup" menu. - The "current/next" display now only shows those lines that actually contain information. - When directly selecting a channel by entering the channel number, the digits entered so far together with the name of that channel are displayed on the OSD (suggested by Martin Hammerschmid). 2000-09-20: Version 0.64 - NOTE: If you are using DVB driver version 0.7 you need to load the dvb.o module with option outstream=0, so your insmod statement should read 'insmod dvb.o outstream=0'. This is currently necessary because 'vdr' still works with AV_PES data. - Video files now have the 'group read' bit set. - Fixed handling errors in 'readstring()'. - Handling SIGPIPE and re-establishing handler after intercepting a signal. - The configuration files are now by default read from the video directory. This can be changed by using the new '-c' option. Make sure you copy your current '*.conf' files to your video directory ('/video' by default), or use "-c ." to get the old behaviour of loading the configuration files from the current directory. - Waiting for input is now handled by a common function, which improves response time on user actions. As a consequence the EIT data may sometimes not be displayed, but this will change later when cEIT runs as a separate thread. - The new SVDRP command 'HITK' (thanks to Guido Fiala!) can be used to 'hit' a remote control key. Establish an SVDRP connection and enter HITK without a parameter for a list of all valid key names. - The new SVDRP command 'GRAB' (thanks to Guido Fiala!) can be used to grab the current frame and save it to a file. - The new SVDRP commands 'OVL*' can be used to control video overlays (thanks to Guido Fiala!). This is mainly for use in the 'kvdr' tool (see the 'kvdr' page at http://www.s.netic.de/gfiala). - If the name of the video directory used with the '-v' option had trailing slashes, the recording file names have been damaged. Trailing slashes are now silently removed. - Fixed a buffer overflow in EIT parsing. - Added a security warning regarding SVDRP to the INSTALL file. - Fixed 'confirm' dialog. - The daemon mode (option '-d') now no longer works with REMOTE=KBD (there is no stdin in daemon mode, so KBD makes no sense - plus it sometimes crashed). 2000-10-03: Version 0.65 - Modified LIRC interface to better handle repeat function. - Faster OSD by first writing into a bitmap and then sending the entire bitmap to the DVB driver at once (requires the patch 'dvb.c.071.diff' to be applied against the version 0.71 DVB driver file 'dvb.c'). - When switching channels the channel is now immediately displayed, and the current/next information is shown as soon as it becomes available. - No longer displaying the year in the 'Recordings' menu to save space for the title. - The 'Recordings' menu now displays a '*' to indicate new recordings. - Added the description of the timers.conf file to the FORMATS file (thanks to Bastian Guse). - Displaying as much as possible of the current/next info (dropping characters that would display only partially). - In normal viewing mode the '0' key now toggles between the current and the previous channel. 2000-10-08: Version 0.66 - Remote control data is now received in a separate thread, which makes things a lot smoother. - Repeat and release of remote control keys is now explicitly distinguished. - In replay mode the search forward/back and skip functions now have two modes: Pressing the key shortly and releasing it starts the function, and pressing it again stops it. Pressing and holding down the key starts the function and releasing the key stops it. - The '@' character that marks an "instant recording" can now be turned off in the "Setup" menu (thanks to Matthias Schniedermeyer). - Pressing the "Back" button while replaying now stops replaying and brings up the "Recordings" menu (suggested by Carsten Koch). This can be used to easily delete a recording after watching it, or to switch to a different recording. - The "Recordings" menu now places the cursor on the last replayed recording, if that file still exists. - The "Blue" button in the "Main" menu can now be used to "Resume" a previously stopped replay session (suggested by Martin Hammerschmid). - The low and high LNB frequencies can now be changed in the "Setup" menu. 2000-11-01: Version 0.67 - The EIT information is now gathered in a separate thread. - The sytem time can now be synchronized to the time broadcast in the DVB data stream. This can be enabled in the "Setup" menu by setting "SetSystemTime" to 1. Note that this works only if VDR is running under a user id that has permisson to set the system time. - The new item "Schedule" in the "Main" menu opens VDR's EPG (thanks to Robert Schneider). See the MANUAL file for a detailed description. - The new setup parameters MarginStart and MarginStop define how long (in minutes) before the official start time of a broadcast VDR shall begin recording, and how long after the official end time it shall stop recording. These are used when a recording is programmed from the "Schedules" menu. - The delay value in the dvb.c.071.diff patch to the driver has been increased to '3', because on some systems the OSD was not displayed correctly. If you are running an already patched version 0.71 driver and encounter problems with the OSD, please make sure the parameter in the ddelay call is '3', not '2'. - Fixed initializing the RCU remote control code (didn't work after switching on the system). - Problematic characters in recording names (which can come from timers that are programmed via the "Schedules" menu) are now replaced by suitable substitutes. 2000-11-19: Version 0.68 - Date and time in the title of an event info page are now always right adjusted. - The 'current channel' is now handled device specific (in case there is more than one DVB card). - The 'SetSystemTime' option in the "Setup" menu is now shown as "yes/no". - Implemented "internationalization" (see 'i18n.c' for information on how to add new languages). Thanks to Miha Setina for translating the OSD texts to the Slovenian language. - Fixed learning keys on the PC keyboard (display oscillated). - Fixed a timing problem with OSD refresh and SVDRP. - Avoiding multiple definitions of the same timer in the "Schedule" menu (this could happen when pressing the "Red" button while editing the timer). - There can now be a configuration file named 'commands.conf' that defines commands that can be executed through the "Main" menu's "Commands" option (see FORMATS for details on how to define these commands). - Added a 'fixed' font for use with the output of system commands. - The 'Priority' parameter of the timers is now also used to interrupt a low priority timer recording if a higher priority timer wants to record. - A timer recording on a DVB card with a CAM module will now be interrupted by a timer that needs to use this specific DVB card to record an encrypted channel, if the timer currently occupying this DVB card doesn't need the CAM module (and thus can continue recording on a different DVB card). - The "Yellow" button in the "What's on now/next?" menus now displays the schedule of the current channel from that menu. - All DVB cards in a multi-card system now write their EIT information into the same data structure. - If there is more than one DVB card in the system, the non-primary cards are now used to periodically scan through the channels in order to keep the EPG info up-to-date. Scanning kicks in after 60 seconds of user inactivity (timeout in order to keep user interactions instantaneously) and each channel that has the 'pnr' parameter defined in 'channels.conf' is switched to for 20 seconds. If there is only one DVB card in the system, that card will start scanning after 5 hours (configurable through the "Setup" menu) of user inactivity and will switch back to the channel it originally displayed at the first sign of user activity. Any scanning will only occur if that particular card is not currently recording or replaying. - Now shifting the 'Subtitle' info into the 'ExtendedDescription' on stations that don't send the EIT information correctly (like, e.g., 'VOX'). - Implemented a 10 seconds latency when removing files. - Fixed unwanted reaction on the "Green" and "Yellow" button in the "Event" display. - Implemented 'Transfer Mode' to display video data from the DVB card that actually can receive a certain channel on the primary interface. This is currently in an early state and may still cause some problems, but it appears to work nice already. 2001-01-18: Version 0.70 - VDR now requires driver version 0.8.1 or higher. - Recordings are now saved in PES mode. Note that you now need to install the driver *WITHOUT* 'outstream=0'! This is the default when you 'make insmod' in the DVB/driver directory. Old recordings (in AV_PES mode) can still be replayed (as long as the driver still supports replaying AV_PES files). The only limitation with this is that in fast forward/back mode the picture may be slightly distorted and there may be sound fragments. - The EPG data is now dumped into the file /video/epg.data every ten minutes. Use the Perl script 'epg2html.pl' to convert the raw EPG data into a simple HTML programme listing. - Fixed handling of channel switching with the "Blue" button in the "What's on now/next?" menus. - Fixed saving the MarginStop setup parameter. - Fixed missing initialization in cConfig. - Implemented "On Disk Editing". - There is no more default 'timers.conf' file. - Added Italian language texts (thanks to Alberto Carraro). - Fixed starting a replay session when the program is currently in 'Transfer Mode'. - Fixed setting/modifying timers via SVDRP with empty summary fields. - Fixed a problem with recordings that have a single quote character in their name (this is now mapped to 0x01). - Changed the value for Diseqc to '0' in the default 'channels.conf'. - Fixed displaying channels and recording status in the RCU's LED display when a recording is interrupted due to higher priority. - Implemented safe writing of config files (first writes into a temporary file and then renames it). - In case the video data stream is broken the log message will come only every 5 seconds. - The current channel is now saved in the 'setup.conf' file when VDR is cancelled, and will be restored next time it is started (thanks to Deti Fliegl). - The EIT scanning thread is now locked when switching channels to avoid problems. - Encrypted channels can now be selected even without knowing the PNR (however, it is still necessary for the EPG info). 2001-02-24: Version 0.71 - Fixed 'Transfer Mode' in cases where a non-primary interface was switched to a channel that only the primary interface can receive (which could happen in the EPG scanner). - The EPG scanner now starts with the first channel (it used to start with the second channel). - Reacitvated setting the PNR. - Adapted the frame scanning to the new muxing of the driver. - The new compile time option REMOTE=NONE can be used to compile VDR without any remote control support (for applications where it shall be controlled exclusively via SVDRP). - The new command line option -D can be used to define which DVB interfaces a certain instance of VDR shall use. - The "Left" and "Right" keys are now used to page up and down in lists (thanks to Martin Hammerschmid). Since the "Timers" menu already uses these keys to (de)activate timers, this functionality is not available there. - The "Main" and "Commands" menu now support "hotkeys", which means that if the first non-blank character of a menu item is a digit in the range 1..9, that item can be selected by pressing the respective numeric key on the remote control. - The channel data in 'channels.conf' now contains the teletext PID (thanks to Dave Chapman). Existing files will be read normally (and the teletext PID set to 0), but once they are written back (due to some channel editing) the file will have the new format. - The EPG scanner now scans each transponder only once per cycle. - Deleted recordings are now automatically removed from disk after a while (not only when disk space is being needed for a new recording). - Fixed repeat function in LIRC remote control. - Changed the MAXDVBAPI macro in dvbapi.c to 4 in order to directly support the maximum possible number of DVB cards. - The 'Ca' parameter in the default 'channels.conf' has been changed from '2' to '3' because the VDR prototype now has 3 DVB cards (and currently the CAM module only works if it is inserted into the last DVB card). - The "Now", "Next" and "Schedule" menus now remember the current channel and restore the list when switching between them. - The "Green" button in the "Recordings" menu can now be used to rewind a recording and play it from the very beginning. - Fixed handling ':' in timer filenames and '\n' in timer summaries (see FORMATS). - When removing recordings empty directories are now removed from the video directory. - Added the "schnitt" tools from Matthias Schniedermeyer. - New SVDRP command MESG to display a short message on the OSD. - The Perl script 'svdrpsend.pl' can be used to send SVDRP commands to VDR. - SVDRP can now immediately reuse the same port if VDR is restarted. - SVDRP now has a timeout after which the connection is automatically closed (default is 300 seconds, can be changed in "Setup"). - The compile time switch VFAT can be used to make VDR avoid the ':' character in file names (VFAT can't handle them). Do 'make VFAT=1' to enable this. - Support for DVB-C (thanks to Hans-Peter Raschke and Peter Hofmann). See the INSTALL file for more information about the use of VDR with cable. - Fixed an occasional segfault in the EIT processor. - A value of '0' for the EPGScanTimeout setup parameter now completely turns off scanning for EPG data on both single and multiple card systems. - New setup parameter "PrimaryLimit" that allows to prevent timers from using the primary DVB interface in multi card systems. Default value is 0, which means that every timer may use the primary interface. - The 'active' field of a timer will now be explicitly set to '1' if the user modifies an active timer (see FORMATS for details). - The new command line option -w can be used to activate a watchdog that makes VDR exit in case the main program loop does not respond for more than the given number of seconds. This is mainly useful in combination with the new 'runvdr' script that restarts VDR in case is has exited. 2001-04-01: Version 0.72 - Fixed SVDRP commands LSTC and LSTT to make them return an error message if no channels or timers are defined. - Enhanced 'channels.conf.cable' (thanks to Hans-Peter Raschke). - Fixed switching to another channel via the EPG while a recording is being replayed. - Fixed a memory leak in the EIT processor that happened when the system time was set. - Removed some redundant code from the cListBase destructor. - Fixed internationalization of some "Main" menu texts. - Updated 'channels.conf' after the recent changes of Premiere World (thanks to Axel Gruber). - Redesigned the ring buffer to make it work with two separate threads for input and output (also prepared for using a remultiplexer). - Fixed setting system time from transponders. - Fixed a segfault in the Schedule menu in case there is no EPG information. - The 'runvdr' script now kills any leftover vdr threads before restarting it. - Fixed a problem with Daylight Saving Time when displaying the times of recordings. - Added Dutch language texts (thanks to Arnold Niessen). - The new command line option -t can be used to set the controlling terminal (thanks to Jürgen Sauer). This is especially useful when starting VDR through an entry in /etc/inittab (see INSTALL). - Since the CAM module only works if it is installed in the "highest" DVB card, recordings now search for a free DVB card from lowest to highest index (as opposed to the previous "highest to lowest" search) in order to not use the CAM card for FTA recordings unless necessary. This is only important for systems with three or more DVB cards. - Added the "statdvb2vdr" tool from Hans-Peter Raschke. - Fixed a segfault that sometimes happened when killing VDR. - VDR now returns an exit status of '2' in case of an error at startup, instead of terminating with 'abort()' (which caused a core dump). - SVDRP now also works with clients that don't do line buffering (like the Windows 'telnet'). - Empty lines in config files no longer cause error messages. - New SVDRP command LSTE to list the EPG data. - The SVDRP HELP command now prints the topics in several columns. 2001-06-02: Version 0.80 - VDR now requires driver version 0.9.0 or higher. - Switched to the "new API" (thanks to Dave Chapman for his great support in this task). - New setup parameter "LnbSLOF" that defines the switching frequency of the LNB. - Fixed a bug in the EPG scanner with more than one DVB card. - Fixed checking for free disk space, so that it works with NFS mounted drives. - Files are now created with mode 644. - Fixed checking the exit status in the 'runvdr' script. - Activated loading the driver in 'runvdr'. Please read the comments in 'runvdr' for details. - The new "emergency exit" feature automatically triggers a restart of VDR (if used with 'runvdr', otherwise it simply exists) if * tuning the channel for a recording fails * no useful data is received within the first 1MB of a recording * no data is received within a recording for more than 5 seconds This should make sure that a recording is successfully restarted after any problems. - Processing the EIT data is now disabled during replay and 'Transfer Mode' in order to avoid video and audio glitches (there appears to be a bandwidth problem somewhere in the driver/firmware/hardware). - Due to the reduced amount of OSD memory provided by the driver the number of lines in the OSD had to be reduced by 2. By rearranging some of the display items the amount of visible information remained the same as before, though. If your DVB card has even less memory (which would result in only the channel switching display and the replay progress display being visible, but no "Main" menu), try reducing the constant 'MenuLines' in dvbapi.h (currently '13') even further. - There are two new setup parameters to define the "Default Priority" and "Default Lifetime" when creating a new timer event. - The meaning of the "Lifetime" parameter has been modified: a value of '99' now means that the recording will live "forever", and a value of '0' means that the recording has no guaranteed lifetime and will be deleted whenever a new recording with higher priority needs disk space. - Updated version of Matthias Schniedermeyer's 'schnitt' tools. - New 'master-timer' tool (thanks to Matthias Schniedermeyer). 2001-06-12: Version 0.81 - Fixed handling the case where the driver reports EAGAIN during recording, but no data comes within 5 seconds. - Fixed EPG scanning on single DVB card systems. - There can now be two audio PIDs per channel, which can be toggled via the "Green" button in the "Main" menu. The "Edit Channel" menu therefore now has two audio PID fields (Apid1 and Apid2). By default, Apid2 is 0, which means there is no alternate audio track. - Fixed replaying in case the driver reports EAGAIN. - Now 'runvdr' checks if the driver is already loaded (thanks to Henning Holtschneider). - Fixed removing recordings with Lifetime = 99. - Improved channel switching. 2001-06-16: Version 0.82 - Increased timeout until reporting "broken video data stream" when recording. - Increased amount of non-useful data received by cRemux before assuming the recording will fail. - If there are two audio PIDs defined for a channel, both audio tracks will now be recorded and can be selectively replayed later. See the FORMATS file for details on how these different audio tracks are stored in the recorded files. In order for this to work properly you need to use a driver version dated 2001-06-16 or later, where the default PES filter buffer size has been reduced. This will create packets for the second audio track that are small enough to multiplex smoothly with the video data. - Fixed a bug in the editing mechanism (didn't work with recordings that consist of more than one data file). - The compile time switch VFAT has been fixed to recognize the ':' character in recording names, too. - Setting all PIDs to 0x1FFF before switching channel. - New setup parameter "VideoFormat" to define the aspect ratio of the tv set in use (4:3 or 16:9). 2001-06-26: Version 0.83 - Avoiding "Device or resource busy" error message when setting PIDs. - Added Portugese language texts (thanks to Paulo Lopes). - Recording and replaying Dolby Digital (AC3) sound. - No longer getting stuck when a channel doesn't sync while switching with the 'Up' and 'Down' keys. 2001-07-22: Version 0.84 - Fixed video packet scanning to make it recognize the whole range of allowed video packet ids. - Added an additional "emergency exit" in case channel switching doesn't work several times in a row (when will the driver finally become stable enough to allow rock solid channel switching??). - No longer sending a Diseqc command if the Diseqc value for a given channel is '0'. Previously this caused problems with some multi-switches (thanks to Markus Lang and Ulrich Röder). - When switching channels by entering the channel number via the numeric keys on the remote control, the channel number displayed is now followed by the '-' character to indicate that additional digits can be entered. - Increased the timeout for numeric channel switching from 500ms to 1s. - Fixed handling the "Green" button in the "Schedules" menu for channels that have a second audio PID. - Fixed high system load when displaying a still picture in replay. - Fixed a hanging SVDRP connection if the client dies without issuing QUIT. - Increased the frame buffer size to 192KB. - Removed a superfluous VIDEO_FREEZE call in the replay buffer. - Added French language texts (thanks to Jean-Claude Repetto). - Modified OSD to use 2bpp windows (4 colors) in order to work with less memory, allow a larger OSD window and be faster. The group separators in the "Channels" menu had to be given a different color. - Moved the channel display to the bottom of the screen. - Displaying the frame counter in the replay progress display only when editing a mark. - Fixed handling characters above 0xEF in SVDRP. - Fixed a possible crash in parsing incorrect lines in 'channels.conf'. - New channel settings for Premiere World (Dolby Digital PIDs not yet available). - Increased the buffer for key names received from LIRC (thanks to Andre Valentin). - Fixed handling a channel group separator at the very beginning of the 'channels.conf' file. 2001-07-29: Version 0.85 - Added Norwegian language texts (thanks to Jørgen Tvedt). - Increased the usleep value in cDvbOsd::Cmd() to 5000 in order to work on systems with the KURT/utime-patch (thanks to Guido Fiala). - Changed the check whether the driver is loaded in runvdr to check for the 'dvb' module (the last one loaded). - Fixed repeat function with LIRC (thanks to Stefan Huelswitt). - Increased the upper limit for the symbol rate to 30000 (thanks to Ulrich Röder). - Made the position of the channel display configurable (thanks to Stefan Huelswitt). - Made the width and height of the OSD configurable (thanks to Stefan Huelswitt). - DiSEqC support can now be generally enabled/disabled in the Setup menu. This may be necessary if your multiswitch gets irritated by the default DiSEqC codes '0' (thanks to Markus Lang). - Fixed replaying in case there is no index file. - Fixed jumping to an editing mark when replay has been paused. - Avoiding unnecessary code execution in the replay progress display (thanks to Guido Fiala). - When entering time values the digits that still have to be entered are now shown as '-' (as in "1-:--"). - When setting an editing mark while the progress display is not active, the display will now be turned on for a short while to indicate the successful setting of the mark. - Updated 'channels.conf' for Premiere World (thanks to Mel Schächner). Check your timers if you use this channels.conf file, since the sequence of several PW channels has been changed. - Changed the color of "Info" messages to "black on green" and that of the confirmation messages (like "Delete...") to "black on yellow". - Fixed display with DEBUG_OSD (it still crashes sometimes, esp. when replaying, but I can't seem to find what causes this... any ideas anybody?). - Avoiding audio/video distortions in 'Transfer Mode' by no longer actually tuning the primary interface (which can't receive this channel, anyway). Apparently the driver gets irritated when the channel is switched and a replay session is started immediately after that. - Increased timeout until reporting "video data stream broken" when recording. - Explicitly switching back to the previously active channel after ending a replay session (to have it shown correctly in case it was in 'Transfer Mode'). 2001-08-06: Version 0.90 - Modified the display of the channel group separators (thanks to Markus Lang for this suggestion). - Added support for replaying DVDs (thanks to Andreas Schultz). See INSTALL for instructions on how to compile VDR with DVD support. - Fixed replay progress display in case replay is paused while watching an ongoing recording. - Ringbuffer uses semaphores to signal empty/full conditions. - Fixed calculating the timeout value in cFile::FileReady() (thanks to Wolfgang Henselmann-Weiss). 2001-08-12: Version 0.91 - Fixed displaying colored button texts that are too long. - Suppressing replay progress display when replaying a DVD. - Updated channels.conf.cable (thanks to Uwe Scheffler). - Updated French OSD texts (thanks to Jean-Claude Repetto). - Improved AC3 decoding when replaying DVDs (thanks to Matjaz Thaler). - Fixed handling DVB card indexes when using only one card in a multi-card system. - Changed the 'Eject DVD' button text to a simple 'Eject' (the German text was too long...). - Made the font file generation more stable (thanks to Artur Skawina). - Changed the default value for the "DiSEqC" setup parameter to "off". - The new command line option '-E' can be used to define where the EPG data shall be written to. This is especially useful if VDR runs in a system that turns off the video disk when it is not used, and therefore needs to write the EPG file to a ramdisk (or turn off writing it alltogether). See 'vdr --help' for details. - Making sure the disk is up and running before starting recording (this is important for systems that turn off the video disk when it is not used). - Added the "Jump" function in replay mode (thanks to Stefan Huelswitt). See the description of the "Red" key in MANUAL under "Replay Control" for details. - Fixed displaying editing marks when toggling a mark in "pause" mode. - If there is no free DVB device to record, the log message will now be given only once. - Made I/O more robust by handling EINTR (thanks to Werner Fink). 2001-08-18: Version 0.92 - The "channel not sync'ed" log message now also lists the card number. - Now using the EIT services from 'libdtv' (thanks to Rolf Hakenes), which provides EPG information for NVOD ("Near Video On Demand") channels. - Doing some bug fixing on the EPG data (some tv stations apparently have their own idea on how to fill in the data...). The level up to which EPG bugs are fixed can be controlled with the EPGBugfixLevel parameter in the "Setup" menu (see MANUAL for details, and cEventInfo::FixEpgBugs() in eit.c for the actual implementation). - Fixed broken recordings after a driver buffer overflow. - Fixed the chirping sound after Pause/Play of a DVD (thanks to Andreas Schultz). 2001-08-26: Version 0.93 - The menus and the channel display now show the current date and time. - The new Setup parameter MaxVideoFileSize can be used to customize the maximum size of the recorded video files. - Fixed a bug in handling repeating timers that record over midnight (the calculation of matching timers has been completely rewritten). - Timers that are currently recording are now marked with '#' in the "Timers" menu. - Timers are now sorted in the "Timers" menu, showing the sequence in which they will be recording. This can be disabled in the "Setup" menu. Note that the "Mark" button doesn't work if timers are displayed sorted. 2001-09-02: Version 0.94 - Implemented automatic shutdown (see INSTALL and MANUAL for details). - New SVDRP command NEXT to show the next timer event. - The new remote control key "Power" can be used to turn the VDR machine off (this requires the presence of the '-s' option). - Fixed code for the default "Ok" button on the PC keyboard (was 0x162 on the "good old" keyboards (with the F-keys at the left side), while it changed to 0x15E on the newer keyboards). - When a recording is edited, the summary information (if present) is now also copied. - When a recording is running on the primary interface, any attempt to change the current channel will now lead to a "Channel locked" message. - The main program loop now first checks whether any timer recordings are finished, before starting a new timer recording. This is important in case one timer ends at the same time another timer starts. - New setup parameter OSDMessageTime to define how long an OSD message shall be displayed. - The "File" parameter of a timer can now contain the '~' character to store the recording in a hierarchical directory structure. The '~' character has been chosen since the file system's directory delimiter '/' may be part of a regular programme name (showing the directory hierarchy in the "Recordings" menu will follow later). - Repeating timers now create recordings that contain the 'Subtitle' information from the EPG data in their file name. Typically (on tv stations that care about their viewers) this contains the episode title of a series. The subtitle is appended to the timer's file name, separated by a '~' character, so that it results in all recordings of this timer being collected in a common subdirectory. You can disable this with the 'UseSubtitle' parameter in the "Setup" menu. - The summary information is now taken from the EPG data at the actual time of recording (no longer at the time the timer is created in the "Schedule" menu). If a timer already has summary data, that data will be used. If you have repeating timers in your 'timers.conf', you may want to make sure they do NOT contain any summary information (that's the last field in the timer definitions). Use your favourite text editor to delete that information. That way every recording will store the actual summary data at the time of the recording. 2001-09-16: Version 0.95 - Fixed behaviour in case the shutdown didn't take place (there were many "next timer event at..." messages in that case). - Reduced the default value for MinEventTimeout to 30 minutes. - Fixed detecting manual start in shutdown feature. - An error message is now displayed in case the 'Transfer Mode' can't be started because the necessary DVB card is currently recording (or there is no DVB card that can access this channel). - Fixed toggling channels with the '0' key in case the "Ok" button has been pressed to display the current/next information. - Pressing the "Power" key now always initiates the shutdown sequence (after user confirmation in case of a recording timer), event if there is currently a menu or a replay session active. Note the additional remarks in INSTALL regarding the values of the two parameters given to the shutdown program in case of a currently recording timer. - Switching through channel groups with the "Left" and "Right" keys now always starts at the group that contains the current channel. - Implemented "Multi Speed Mode" (thanks to Stefan Huelswitt). - Implemented backtracing to hit the right spot after fast forward/rewind (thanks to Stefan Huelswitt). - Implemented replay mode display (thanks to Stefan Huelswitt, with a few rewrites by kls). - Changed the size of all input buffers used to parse config files or receive SVDRP commands to the same value of 10KB. This allows long strings to be used in the 'summary' field of a timer, for instance. - The pipe to the Dolby Digital replay command (option '-a') now closes all unused file descriptors in the child process to avoid crashing when the OSD is used (thanks to Andreas Vitting). - Switched to the driver's new tuning API (VDR now requires a driver version dated 2001-09-14 or higher). - Changed obsolete macro VIDEO_WINDOW_CHROMAKEY to VID_TYPE_CHROMAKEY (thanks to Guido Fiala). - New version of the "Master-Timer" tool (thanks to Matthias Schniedermeyer). - Better error handling when writing configuration files. - Fixed putting the final editing mark into the edited version's marks file. - Fixed manipulating an editing mark at the very end of a recording. - Fixed starting a new replay immediately after stopping a previous one (had caused a mix between live video and replay). - Three new keys ("Volume+", Volume-" and "Mute") to control the DVB card's audio output volume. - New version of the 'epg2timers' tool (thanks to Carsten Koch). 2001-09-23: Version 0.96 - Made VDR compile with libdvdread-0.9.1 (thanks to Andreas Schultz). Note that you now _need_ version 0.9.1 of libdvdread to compile VDR with DVD support! - Several fixes to the replay mode display (thanks to Stefan Huelswitt): no more replay mode display when pressing the "Green" or "Yellow" button (Skip +/-60s); fixed timeout when pressing '0' to set an editing mark while the progress display is not shown; mode display is shown after progress display is closed; pressing "Ok" while the mode display is on brings up the progress display; no more unnecessary display of "normal play mode". - Supplying the new frontend parameter 'Inversion' (currently it is always set to INVERSION_AUTO, which should work with all channels on Astra). - Removing unnecessary double quotes from EPG Subtitle in EPGBugfixLevel >=1. - EPG info is now updated if the contents changes but the ID remains the same. - Fixed handling SVDRP commands whith more than one blank between the command word and the options. - The current volume setting is now saved to setup.conf and restored at the next program start. - New command line option '-r' to define a command that gets called before and after each recording (see INSTALL for details). - Implemented a check to see whether the system time is running linearly. - Writing the current time (as seen by VDR) into the log file when starting a timer recording (this may help debugging cases where timers don't start at the expected time). - Made the volume, mute and power keys work when a menu is active, too (thanks to Matthias Weingart). 2001-10-21: Version 0.97 - Implemented a lock file to prevent more than one instance of VDR from removing files from the video directory at the same time. - The new setup parameter SplitEditedFiles can be used to control whether or not the result of an editing process shall be written into separate files. - Fixed handling repeat function when using LIRC (thanks to Matthias Weingart). - The shutdown program (defined with the '-s' option) now also gets the channel number and recording title of the timer (see INSTALL). - New channel data for 'Premiere One', 'Premiere X-Action', 'Fox Kids Türkce' and 'N24' (thanks to Andreas Share, Ulrich Röder, Uwe Scheffler and Simon Bauschulte). Note that if you are using the default 'channels.conf' or 'channels.conf.cable' files you may need to check any exiting timers to see whether they still use the correct channel number. - Fixed the "EPG bugfix" (sometimes had duplicate information in Subtitle and Extended Description). - Fixed checking for valid video device when setting the video mode. - The external command 'sort' is no longer required. VDR now sorts the list of recordings itself, making sure that recordings that stem from repeating timers are sorted chronologically. Sorting is done according to the setting of the current locale, so you may want to make sure LC_COLLATE is set to the desired value (see INSTALL). - Fixed handling 'newline' characters in EPG texts (thanks to Rolf Hakenes for an improved version of his 'libdtv'). Newline characters are always mapped to a single "blank" in VDR, because they would otherwise disturb the Title and Subtitle layout in the channel display (where these are assumed to be single line texts) and would have to be specially handled in the 'epg.data' file and the LSTE command in SVDRP. - Mapping ` ("backtick") characters in EPG texts to ' (single quote). - Fixed timers starting and ending at unexpected times. 'localtime()' was not thread safe, now using localtime_r(). - Removed the "system time seen..." message. - Fixed a bug in the replay mode display when pressing the Green or Yellow button while in trick mode (thanks to Stefan Huelswitt) - Closing all open file descriptors when calling external programs. - The menu timeout now also works when pressing the "Back" button during replay to enter the "Recordings" menu. - Updated 'channels.conf' for the "Bundesliga" channels of Premiere World (thanks to Mel Schächner). - Fixed reading timers.conf and channels.conf that contain blanks after numeric values. - Fixed handling trick modes near the beginning and end of a recording. - Pressing the "Back" button while replaying a DVD now leads to the DVD menu. 2001-11-04: Version 0.98 - Completed storing the current audio volume in the setup.conf file (thanks to Andy Grobb). - Fixed closing the progress display with the "Back" key when in trick mode and Setup.ShowReplayMode is enabled (thanks to Stefan Huelswitt). - New SVDRP commands LSTR and DELR to list and delete recordings (thanks to Thomas Heiligenmann). - Fixed a crash when pressing the '2' button while replaying a DVD. - Updated 'channels.conf' for the "Bundesliga" channels of Premiere World (thanks to Mel Schächner). - Changed the tuning code to use FrontendInfo to detect the type of DVB card. - Removed the recursion stuff from cThread (cMutex already does this). - Fixed handling the repeat function in the channel display. - Avoiding multiple EPG entries for the same event (thanks to Rolf Hakenes for some valuable information on how to do this). - A recording on the primary interface can now be stopped to make it continue on an other free DVB card (if one is free at the moment). See MANUAL for details. - Added some missing teletext PIDs (thanks to Norbert Schmidt). - Added PTS to the converted PCM audio when replaying a DVD (thanks to Andreas Schultz). Now the audio and video of a DVD replayed over the DVB card's A/V out should always be in sync. - Fixed handling the "Power" key in case Setup.MinUserInactivity is set to 0 to disable automatic shutdown. - Added a fifth parameter to the 'shutdown' call that indicates the reason for this shutdown request (see INSTALL). - Fixed releasing 'index' memory after recording or playback. - Fixed ejecting a DVD while it is being replayed. - Removed all video overlay stuff from cDvbApi and SVDRP. Guido Fiala's new 'kvdr' version 0.4 now does these things itself. As a consequence of this you will now need to use kvdr 0.4 or later. - The device /dev/video is now opened only if necessary (to GRAB an image), allowing other programs (like 'kvdr', for instance) to use that device. 2001-11-25: Version 0.99pre1 - Fixed several channel definitions in 'channels.conf' (thanks to Thilo Wunderlich). - Added MPEG audio support for DVD (thanks to Andreas Schultz). - Implemented DVB-T support (thanks to Dave Chapman). This currently works only for UK channels. - Removed the range limits for the Frequency and Srate parameters of channel definitions. - Changed the maximum value for PIDs in channels.conf from 0xFFFE to 0x1FFF. - Fixed DVD audio sync problems (thanks to Andreas Schultz). - Fixed external AC3 replay for DVDs (thanks to Andreas Schultz). 2002-01-27: Version 0.99pre2 - Fixed setting the OSD size in the 'Confirm' interface call (thanks to Deti Fliegl). - Removed the 'read incomplete section...' error message in the EIT processor. - Fixed channel data for "DW TV" (thanks to Axel Gruber). - Added DPID to "PREMIERE MOVIE 1" in channels.conf.cable (thanks to Stephan Schreiber). - Prepared the OSD functions for multiple overlapping windows. - Removed the check to see whether the system time is running linearly. - Improved performance of SVDRP command entry. - Removed EPGBugfixLevel '3' - after more than a year Pro-7 finally managed to broadcast the correct timestamps for EPG events between 0:00 and 6:00! - Fixed failing watchdog timer if program hangs in OSD activities (thanks to Carsten Koch). - No longer requiring 'libncurses' if compiling without DEBUG_OSD=1 and REMOTE=KBD (thanks to Lauri Pesonen). - The "Recordings" menu now displays a hierarchical structure if there are subdirectories for the recordings. This can be controlled through the "RecordingDirs" parameter in the "Setup" menu. See "MANUAL/Replaying a Recording" for details. - Improved speed of setting the Help button texts. - Fixed handling file names that contain single quotes (') or dollar signs ($) in the call to the shutdown command (option '-s') and the recording command (option '-r'). - Improved error handling in the editing process; the resulting file will be deleted if an error occured. - A message is now prompted at the end of the editing process, indicating whether the process succeeded or failed. - Fixed setting the LastActivity timestamp after a shutdown prompt (thanks to Sergei Haller). - A message is now prompted if free disk space becomes low during recording. - The editing process now calls AssertFreeDiskSpace() to remove deleted recordings if the disk becomes full. - The "Main" menu now displays in its title the used disk space (in percent) and the estimated free disk space (in hh:mm), assuming a data rate of 30 MB per minute. - Activating the "Recordings" menu now displays "scanning recordings..." to give the user some feedback in case this takes longer. - Status messages are now displayed centered. - Removed the 'Tools' subdirectory from the VDR archive. All contributed tools can now be found at ftp://ftp.cadsoft.de/pub/people/kls/vdr/Tools. 2002-01-29: Version 0.99pre3 - Fixed handling improper buffer lengths in the EIT parser (thanks to Deti Fliegl). 2002-01-30: Version 0.99pre4 - Fixed handling improperly formatted EIT data (thanks to Rolf Hakenes). 2002-02-03: Version 0.99pre5 - Updated channel settings for 'N24' (thanks to Andreas Gebel). - Fixed handling hierarchical recordings menu in case of directories starting with the same sequence of characters. - Fixed handling timers on the 29th, 30th or 31st of a month in case the next month has less than 31 days. - Added a description of the sort order of individual episodes in the recordings menu to the MANUAL. - Removed the EPG bugfix for "Title / Subtitle" cleanup. Apparently Pro-7 has finally stopped this nasty habit. - Added some EPG bugfix statistics (printed to the log file every time the EPG data is cleaned up and when VDR is terminated). Maybe somebody in charge of the EPG data at the listed channels will read this and take the necessary actions to fix these things... - Changed the [dei]syslog macros in tools.h to use a variable number of args, thus making it safe to use them in nested 'if/else' statements. - Fixed error handling in establishing an SVDRP connection (thanks to Davide Achilli for pointing out this one). - The new configuration file 'svdrphosts.conf' is now used to define which hosts may access the SVDRP port (by default only 'localhost' has access). See FORMATS for details. - The special keywords TITLE and EPISODE can now be used in timer file names (see MANUAL and FORMATS for details). - The new setup parameter NameInstantRecord can be used to define how an instant recording will be named (see MANUAL for details). - When looking for the EPG record of the timer that starts a recording, now that record is taken which covers the time calculated as 'start + (Setup.MarginStart * 2) + 1)' in order to have a better chance of hitting the right record in case of an instant recording. Timers that start further in the future should always be programmed via the "Schedules" menu. - The special VPIDs '0' and '1' are now used to enable recording radio channels. Actually '0' should be enough, but '1' must be used with encrypted channels (driver bug?). Note, though, that since VDR is mainly a *video recorder*, some features like, e. g., the progress display, may not work as expected with radio recordings. Thanks to Michael Paar. - Fixed a problem with the ERR macro defined by ncurses.h (thanks to Artur Skawina). 2002-02-10: Version 0.99 - Fixed a bug in moving timers or channels to the last position in the list (thanks to Matthias Schniedermeyer for helping to debug this one). - Changed the estimated data rate for calculating the remaining disk capacity to 25.75 MB/min. - Only reporting the 'EPG bugfix statistics' if there really were any fixes. - Added Finnish language texts (thanks to Hannu Savolainen). - Reverted to the previous way of searching for the EPG record of the current recording in case of a repeating timer (i.e. taking the one that is in the middle between start and end time). - Added a typedef for 'in_addr_t' to make it work with glibc < 2.2 (thanks to Jürgen Schmidt). - When the last entry in a "Recordings" menu page is deleted, that page is now automatically closed (suggested by Uwe Freese). - Changed the default name for instant recordings to "TITLE EPISODE" (avoiding the '-'). - If Setup.ShowInfoOnChSwitch is set to "no", the box for the EPG display is no longer shown (thanks to Andy Grobb). - If compiled with VFAT=1, characters that can't be handled by a VFAT system are now encoded to '#XX'. - When the user presses the "Power" button and there is a timer about to start recording within Setup.MinEventTimeout minutes, there is now a confirmation prompt telling the user that there is an upcoming timer event. - If a recording has no episode title, the trailing '~' is no longer shown in the progress display. 2002-02-24: Version 1.0.0pre1 - Added scanning for EPG data for another 4 days on channels that support this (thanks to Oleg Assovski). - Removed '#define VFAT 1' from recording.c (was a leftover from testing). - Fixed the "Low disk space!" message (thanks to Sergei Haller). - Added the TPID to Hessen-3 in 'channels.conf' (thanks to Sergei Haller). - Fixed a crash when replaying with DEBUG_OSD=1 (thanks to Stefan Huelswitt). - Implemented the "First day" parameter for repeating timers. See FORMATS for information about the enhanced 'timers.conf' file format, and MANUAL for a description of the new item in the "Edit Timer" menu and the enhanced functionality of the "Blue" button in the "Timers" menu. - When deleting a recording that is currently still being recorded, the related timer will now automatically be terminated. If this is a repeating timer, it will receive a "First day" setting that skips the timer for this day. - Fixed closing all unused file descriptors when opening a pipe (thanks to Werner Fink). - Instant recordings now take the EPG data from the point in time at 5 minutes from the start time of the recording. In order for this to work the 'active' parameter of a timer now uses the second bit to indicate that this is an "instant" recording (see FORMATS for details). - Fixed the SVDRP GRAB command in case the video device can't be opened (thanks to Adrian Stabiszewski). - At startup the data written into 'epg.data' is now read into the EPG data structures. In order for this to work, the 'E' record has been extended to (optionally) contain the 'table ID' (see FORMATS for details). - The new SVDRP command PUTE can be used to put EPG data into the EPG list. See FORMATS for details about the required data format. - Taking the German umlauts 'as is' when compiled with VFAT. - The new Setup parameter RecordDolbyDigital can be used to generally turn off recording the Dolby Digital audio channels in case you want to save disk space or don't have the equipment to replay Dolby Digital audio. - Reading the 'setup.conf' file no longer terminates in case of an error, but rather attempts to read the rest of the file. - Removed DVD support from the core VDR source, since the current version from Andreas Schultz is already much further developed (DVD menu navigation) and the concept of "additional players" in VDR is going to change in version 1.1.0, where a new "plugin" interface shall allow the easy implementation of new players without having to patch the core VDR source. Until then, Andreas has agreed to provide his DVD support as a completely external patch. - The contents of the distribution archive now contains the directory name with the current version number, as in 'vdr-1.0.0pre1/...' in order to avoid inadvertently overwriting an existing VDR directory with a new version. - Added a missing error message in SVDRP command LSTC in case the given channel can't be found. 2002-02-25: Version 1.0.0pre2 - Fixed a crash in case there is no 'epg.data' at program start (thanks to Andreas Schultz). 2002-03-03: Version 1.0.0pre3 - Fixed parsing 'E' records in epg2html.pl. - Fixed a deadlock when switching channels via Schedule/Now|Next/Switch (reported by Martin Hammerschmid). - Changed the meaning of the 'Ca' parameter in 'channels.conf'. Each channel can now define which decryption method it needs in order to be accessed. The new configuration file 'ca.conf' contains the defined values, and the default 'channels.conf' has been modifed to contain the new values for 'Premiere World' and 'ORF'. If you use the default 'channels.conf' and have the conditional access hardware to receive encrypted channels, please make sure you copy the file 'ca.conf' into your /video directory (or wherever your configuration files are located) and go into the "Setup" menu and set the CICAM values according to your hardware setup. Currently there are two possible CICAM entries per DVB card, so any card can implement up to two different conditional access modes (besides the default "Free To Air" mode, which is always assumed to be available on any DVB card). - Updated French language texts (thanks to Jean-Claude Repetto). 2002-03-17: Version 1.0.0pre4 - Added 'Ca' code 201 for 'Cryptoworks, GOD-DIGITAL' to 'ca.conf' (thanks to Bernd Schweikert). - Fixed avoiding the primary DVB interface in case Setup.PrimaryLimit is 0. - Fixed handling CICAM settings if the first one of a DVB card was FTA. - Fixed reacting on changes in CICAM settings (needed to restart VDR before). - The "Blue" button in the "Main" menu now works as "Stop" button if a recording is currently being replayed. - New command line option '-m' to mute audio of the primary DVB device at startup (suggested by Mirko Günther). - The new SVDRP command VOLU can be used to control the audio volume (suggested by Mirko Günther). - Fixed resetting 'mute' state when setting the volume to a non-zero value. - Added log messages when deleting recordings in case the disk runs full while recording. - Fixed closing a pipe (used for replaying Dolby Digital audio), which sometimes left 'zombie' processes behind (thanks to Werner Fink for helping to debug this one). - Now starting the Dolby Digital output thread only if the recording actually contains Dolby Digital audio data (thanks to Werner Fink). - Implemented OSD for Volume and Mute (works only if there is no other OSD activity, but this should be no problem for normal use). - Changed the MANUAL description of the "Conditional Access" setup parameters to reflect the actual "CICAM DVBn m" notation in the "Setup" menu. - The new Setup parameter "Use time from transponder" can be used to define which transponder shall be used to set the system time (see MANUAL for details). If you have been using the SetSystemTime option previously, you now MUST select a channel that you trust to have a reliable time base. - Grouped the Setup parameters into several sub-menus, so that each group of parameters fits on a single screen - unless the height of the OSD has been set to a small value (based on code from Markus Lang). - Changed the title of the "Main" menu to "VDR". - Fixed displaying a system message while the replay mode is being shown. - Physically removing a deleted recording if one with the same name shall be deleted again. - The "Left" and "Right" keys are now used to page up and down in text displays (like the EPG descriptions or the results of commands executed from the "Commands" menu). - Fixed high CPU usage in 'Transfer Mode'. - Replaced 'killproc' with 'killall' in 'runvdr', since apparently 'killproc' is not available by default on some Linux distributions, whereas 'killall' is. Please check if your system provides 'killall' - if it doesn't, please change this back in 'runvdr' and report this (thanks to Achim Lange). - The "Commands" menu now automatically assigns number keys as hotkeys to the commands. If you have preceeded your commands with digits you may want to remove these from your 'commands.conf' file. - The new Setup item "Restart" can be used to force a complete restart of VDR, including reloading the driver. Note that this can only work if VDR and the driver are wrapped into a mechanism that actually performs this action if VDR exits. The 'runvdr' script can be used for this purpose. - Refined texts of the "Setup" menu. 2002-04-01: Version 1.0.0pre5 - Fixed restoring CICAM setup values for a fourth DVB card (thanks to Klaus Wolf). - Completed internationalization of OSD texts (thanks to Hannu Savolainen, Arnold Niessen, Paulo Lopes, Jean-Claude Repetto, Alberto Carraro, Matjaz Thaler and Truls Slevigen). - Improved file I/O in case of EINTR, which may occur e.g. with heavy system load (thanks to Werner Fink). - Now writing the title of a recording into the 'summary.vdr' file. - Workaround for displaying still frames with the unpatched LinuxDVB driver (if anybody ever finds out why the unpatched driver doesn't display VDR's still frames, please let me know). - When executing a command from the "Commands" menu, the title of that command is now immediately shown in the status line (followed by "...") to give the user some feedback that the command is being executed, which is especially important if this takes some time. - Fixed scrolling the "Channels" menu in case the cursor ends up on a group delimiter (thanks to Bernd Zierath for helping to debug this one). - Added manual pages vdr(1) and vdr(5) (which made the FORMATS file obsolete). - New command command line option '-V' to display the VDR version. - Adjusting column width for channel numbers in case there are more than 999 channels. - Checking the return value of '...FileReady...' calls in dvbapi.c for better performance under heavy system load. - New 'make' target 'install', which copies the manual pages and executables to their appropriate system locations and creates the /video directory if it doesn't exist yet. - Automatic hotkey assignment is now suppressed if the first entry in commands.conf starts with a digit in the range '1'...'9', followed by a blank. - Fixed a bug in switching back the replay mode display in time shift mode (thanks to Achim Lange for reporting this one). - Fixed a bug in the "First day" timer parameter for timers that record over midnight. - Added units to Setup parameters. - Changed time entry in the 'Jump' command during replay, so that it is filled up from right to left. - Now using statfs() to determine the amount of free disk space, which avoids the use of an external 'df' command (thanks to Ruben Nunez Francisco). - Fixed skipping the next hit of a repeating timer (thanks to Rainer Zocholl for reporting this one). - Fixed a bug when a timer records over midnight of a day that had a change in Daylight Saving Time (thanks to Mirko Dölle for reporting this one). - Added Polish language texts (thanks to Michael Rakowski). - Fixed a bug in parsing group separators in channels.conf (thanks to Henning Holtschneider for reporting this one). - Changed the default 'Ok' key when using the PC keyboard from '5' (in the numeric block) to 'Enter', because the '5' key didn't work on keyboards with the F-keys on top. - Fixed a bug in the EPG bugfix mechanism if the extended description is shorter than 3 characters (thanks to Andreas Schultz). 2002-04-07: Version 1.0.0 - Fixed a problem with wrong EPG data in the Schedules menu (thanks to Tobias Kerner, problem was initially reported by Michel Moster, but somehow I had misplaced his message...). - Added Spanish language texts (thanks to Ruben Nunez Francisco). - Fixed resetting the "First day" timer parameter once the timer actually starts recording. - Fixed the still picture workaround in case the progress display is active (thanks to Gerald Raaf). - Fixed a problem with accessing the epg.data file before it is fully written (thanks to Thilo Wunderlich for reporting this one). - Now the EPG scan skips channels that have their 'Ca' parameter explicitly set to an other DVB card (suggested by Sergei Haller). - Fixed a possible hangup when reading a broken epg.data file (thanks to Henning Holtschneider for pointing out this one). - Fixed a bug in the editing process in case a previously edited file with the same name was manually deleted on a system with more than one video directory (thanks to Dirk Wiebel for reporting this one). 2002-04-21: Version 1.0.1 - Added some DVB-T channels for Berlin (Germany) to channels.conf.terr (thanks to Andreas Roedl). - Implemented enhanced string editing with upper-/lowercase, insert/overwrite and delete (thanks to Sergei Haller). - Fixed color palette handling on "big endian" systems (thanks to Jean Martin for pointing out this one). - Updated the "Blue Movie" channels to the new "Premiere Erotik" (thanks to Thilo Wunderlich). NOTE: this adds a new channel to 'channels.conf', so that any timers referencing a channel with a number higher than 102 should be checked and adapted if necessary (this only applies if you are using the default 'channels.conf'). - Improved thread locking in the ring buffer to avoid possible race conditions under heavy load (thanks to Werner Fink). - Fixed a crash when selecting the "Jump" function directly after setting an editing mark (thanks to Steffen Koch for reporting and Stefan Huelswitt for fixing this one). - Fixed some missing ',' in i18n.c (thanks to Matthias Hilbig). - Fixed a possible endless loop in shifting recordings between DVB cards (thanks to Stefan Huelswitt for reporting this one). - Updated the Premiere World Formula 1 channels in 'channels.conf' (thanks to Mel Schächner). - No longer setting PIDs 0x1FFF, which apparently fixes problems with CAMs and AC3 sound only working the first time (thanks to Stefan Huelswitt). - Now encoding '.' at the end of a directory name in case of VFAT=1, since Windows can't handle these (thanks to Simon Dean for reporting this one). 2002-05-05: Version 1.0.2 - Now taking an active video cutting process into account when doing shutdown or housekeeping (thanks to Stefan Huelswitt). - The default duration of an instant recording has been increased to 3 hours and is now configurable in the "Setup/Recording" menu. - Added Greek language texts (thanks to Dimitrios Dimitrakos). - Fixed the unit of the "SVDRP timeout" setup parameter (thanks to Marcus Kuba for reporting this one). - Fixed a crash on systems with disks that have a block size larger than 1MB (thanks to Ulrich Petri for helping to debug this one). - Updated 'channels.conf' for the new PW settings (thanks to Andreas Share, Carsten Koch, Gerald Raaf and Mel Schächner). Note that all channels with numbers over 50 may have moved, so you should carefully check any timers you have set! - Updated 'channels.conf.cable' for the new PW settings (thanks to Oliver Lorei Stephan Schreiber and Uwe Scheffler). Note that all channels may have moved, so you should carefully check any timers you have set! For future updates of this file somebody with digital cable should take the role of the "maintainer" and send me updated versions based on the file that comes with the most recent version of VDR. I will then simply replace the entire file 'channels.conf.cable' whenever a new version is sent to me. - Fixed skipping forward in time shift mode near the end of the recording (thanks to Andreas Böttger for reporting this one). 2002-05-09: Version 1.1.0 - Begin of the 1.1 development branch. THIS IS NOT A STABLE VERSION! The current stable version for every day use is still the 1.0 branch. - First step towards a universal plugin interface. See the file PLUGINS.html for a detailed description. The man page vdr(1) describes the new options '-L' and '-P' used to load plugins. This first step implements the complete "outer" shell for plugins. The "inner" access to VDR data structures will follow. - The VDR version number is now displayed in the title line of the "Setup" menu. 2002-05-11: Version 1.1.1 - Separated the actual DVB hardware OSD implementation from the abstract OSD interface. 'osdbase.c/.h' now implements the abstract OSD, while 'dvbosd.c/.h' is the actual implementation for the DVB hardware. This is in preparation for allowing additional kinds of OSD hardware implementations. - Fixed leftover references to the file FORMATS in MANUAL and svdrp.c (thanks to Onno Kreuzinger for reporting this one). - Avoiding ambiguities in the cList template class in case one defines a "list of lists" (thanks to Stefan Huelswitt). - Simplified the basic cMenuSetupPage class for easier use in plugins. - Added setup parameters and a Setup menu to the 'hello' plugin example. - Fixed logging error message for unknown config parameters in plugins. - Rearranged cleanup sequence at the end of the main program. - Adapted PLUGINS.html to use the actual code examples from the 'hello' plugin. 2002-05-13: Version 1.1.2 - Changed the cPlugin::Start() function to return a boolean value that indicates if the plugin will not be able to perform its task (suggested by Stefan Huelswitt). - Added the cPlugin::Housekeeping() function (suggested by Stefan Huelswitt). - Updated channels.conf.cable (thanks to Uwe Scheffler). - Added 'insert' capabilities to cList (suggested by Stefan Huelswitt). - Changed the 'package' target in the plugin's Makefile to produce a package that expands to a directory with just the plugin name and version number (suggested by Stefan Huelswitt). - Made the config directory available to plugins (suggested by Stefan Huelswitt). See PLUGINS.html, section "Configuration files" for details. - Improved the [eid]syslog() macros, so that the LOG_... macros don't need to be given any more. 2002-05-26: Version 1.0.3 - Updated 'Premiere Sport 2' in channels.conf (thanks to Rudi Hofer). - Fixed some function headers to make them compile with gcc 3.x (thanks to Gregoire Favre). - Fixed the cutting mechanism to make it re-sync in case a frame is larger than the buffer (thanks to Sven Grothklags). - Added Swedish language texts (thanks to Tomas Prybil). 2002-06-10: Version 1.0.4 - Added Romanian language texts (thanks to Paul Lacatus). - Removed compiler option '-m486' to make it work on non-Intel platforms (thanks to Alastair McKinstry for pointing this out). 2002-06-16: Version 1.1.3 - Improved the VDR Makefile to avoid a warning if the '.dependencies' file does not exist, and also using $(MAKE) to call recursive makes. - Changed the name of the 'package' target in the plugin Makefiles to 'dist' (following the suggestions in the "GNU Make" manual). If you already have started a plugin project, you may want to change this in your Makefile accordingly. - Improved the plugin Makefile to avoid a warning if the '.dependencies' file does not exist, and also using $(shell...) to get the version numbers. If you already have started a plugin project, you may want to change this in your Makefile accordingly. - Fixed some function headers to make them compile with gcc 3.x (thanks to Gregoire Favre). - Fixed the cutting mechanism to make it re-sync in case a frame is larger than the buffer (thanks to Sven Grothklags). - Added an error message if the directory specified in the '-L' option can't be accessed (suggested by Stefan Huelswitt). - Rearranged OSD class names to make 'cOsd' available for the main OSD interface. - Completely moved OSD handling out of the cDvbApi class, into the new cOsd. - Implemented cStatus to allow plugins to set up a status monitor. See PLUGINS.html for details. - Moved the cEITScanner out of dvbapi.h/.c, into the new eitscan.h/.c. - Added Swedish language texts (thanks to Tomas Prybil). - Fixed parsing 'E' records in epg2html.pl (thanks to Matthias Fechner for pointing out this one). - Removed compiler option '-m486' to make it work on non-Intel platforms. If you have already started a plugin project, you may want to make sure you remove this option from your existing Makefile. - Completely rearranged the recording and replay functions to make them available to plugins. - Replay is now done in a single thread (no more syncing between input and output thread necessary). - It is now possible to record several channels on the same transponder with "budget cards". VDR automatically attaches a recording timer to a card that already records on the appropriate transponder. How many parallel recordings can actually be done depends on the computer's performance. Currently any number of recordings gets attached to a card, so you should carefully plan your timers to not exceed the limit. On a K6-II/450 it was possible to record three channels from transponder 12480 with a single WinTV NOVA-S. - Timers that record two successive shows on the same channel may now overlap and will use the same DVB card. During the time where both timers record the data is simply saved to both files. - The following limitations apply to this version: + 'Transfer Mode' doesn't work yet. + The '-a' option (for Dolby Digital audio) doesn't work yet. + Switching between different language tracks doesn't work yet. + Cutting doesn't work yet. 2002-06-23: Version 1.1.4 - Added Hungarian language texts (thanks to Istvan Koenigsberger and Guido Josten). - Activated cutting. - Activated 'Transfer Mode'. - Moved handling of the Menu key entirely into vdr.c. - Switched VDR's own player to the new cPlayer/cControl structures. - Switched handling 'Transfer Mode' to the new cPlayer/cControl structures. - The following limitations apply to this version: + The '-a' option (for Dolby Digital audio) doesn't work yet. + Switching between different language tracks doesn't work yet. 2002-07-21: Version 1.1.5 - Added direct access to the index data of cPalette (needed for displaying SPUs, thanks to Andreas Schultz). - The status monitor function cStatus::Replaying() now gets a 'cControl *' argument instead of a 'cDvbPlayerControl *' in order to allow additional players to call this function. cPlayer and cControl have been given the functions GetIndex() and GetReplayMode() to allow access to the player's status. - Added cOsd::OpenRaw() to create a raw OSD (needed for displaying SPUs). - Changed the symantics of the Name parameter in cStatus::Recording() and cStatus::Replaying(). It is no longer the full directory name of the recording, but rather just the basic name. This has been changed to allow players that can't provide a name to simply use a string that describes the player type (like, e.g., "DVD"). - Fixed a hangup when switching to the next file during replay. - Fixed a possible race condition in the cDvbPlayer (thanks to Andreas Schultz for pointing out this one). - Disabled channels on Transponder 12070 in 'channels.conf', which apparently no longer transmits. 2002-07-28: Version 1.1.6 - Re-visited the race condition fix in the cDvbPlayer (thanks again to Andreas Schultz). - Changed the VFAT handling to allow users who normally use it but have forgotten to set it when compiling a new version of VDR to at least see their recordings made with VFAT enabled (thanks to Christian Rienecker). - Added some missing teletext PIDs (thanks to Joerg Riechardt). - Fixed PID handling for cReceiver. - Added a missing #include to ringbuffer.c (thanks to Martin Hammerschmid). - Now using CC, CFLAGS, CXX and CXXFLAGS in Makefile.