diff options
Diffstat (limited to 'contrib/ffmpeg/libavcodec/ppc/dsputil_ppc.c')
| -rw-r--r-- | contrib/ffmpeg/libavcodec/ppc/dsputil_ppc.c | 325 |
1 files changed, 325 insertions, 0 deletions
diff --git a/contrib/ffmpeg/libavcodec/ppc/dsputil_ppc.c b/contrib/ffmpeg/libavcodec/ppc/dsputil_ppc.c new file mode 100644 index 000000000..117a7adf1 --- /dev/null +++ b/contrib/ffmpeg/libavcodec/ppc/dsputil_ppc.c @@ -0,0 +1,325 @@ +/* + * Copyright (c) 2002 Brian Foley + * Copyright (c) 2002 Dieter Shirley + * Copyright (c) 2003-2004 Romain Dolbeau <romain@dolbeau.org> + * + * This file is part of FFmpeg. + * + * FFmpeg is free software; you can redistribute it and/or + * modify it under the terms of the GNU Lesser General Public + * License as published by the Free Software Foundation; either + * version 2.1 of the License, or (at your option) any later version. + * + * FFmpeg is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU + * Lesser General Public License for more details. + * + * You should have received a copy of the GNU Lesser General Public + * License along with FFmpeg; if not, write to the Free Software + * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA + */ + +#include "../dsputil.h" + +#include "dsputil_ppc.h" + +#ifdef HAVE_ALTIVEC +#include "dsputil_altivec.h" + +extern void fdct_altivec(int16_t *block); +extern void gmc1_altivec(uint8_t *dst, uint8_t *src, int stride, int h, + int x16, int y16, int rounder); +extern void idct_put_altivec(uint8_t *dest, int line_size, int16_t *block); +extern void idct_add_altivec(uint8_t *dest, int line_size, int16_t *block); + +void dsputil_h264_init_ppc(DSPContext* c, AVCodecContext *avctx); + +void dsputil_init_altivec(DSPContext* c, AVCodecContext *avctx); +void vc1dsp_init_altivec(DSPContext* c, AVCodecContext *avctx); +void snow_init_altivec(DSPContext* c, AVCodecContext *avctx); +void float_init_altivec(DSPContext* c, AVCodecContext *avctx); + +#endif + +int mm_flags = 0; + +int mm_support(void) +{ + int result = 0; +#ifdef HAVE_ALTIVEC + if (has_altivec()) { + result |= MM_ALTIVEC; + } +#endif /* result */ + return result; +} + +#ifdef CONFIG_POWERPC_PERF +unsigned long long perfdata[POWERPC_NUM_PMC_ENABLED][powerpc_perf_total][powerpc_data_total]; +/* list below must match enum in dsputil_ppc.h */ +static unsigned char* perfname[] = { + "ff_fft_calc_altivec", + "gmc1_altivec", + "dct_unquantize_h263_altivec", + "fdct_altivec", + "idct_add_altivec", + "idct_put_altivec", + "put_pixels16_altivec", + "avg_pixels16_altivec", + "avg_pixels8_altivec", + "put_pixels8_xy2_altivec", + "put_no_rnd_pixels8_xy2_altivec", + "put_pixels16_xy2_altivec", + "put_no_rnd_pixels16_xy2_altivec", + "hadamard8_diff8x8_altivec", + "hadamard8_diff16_altivec", + "avg_pixels8_xy2_altivec", + "clear_blocks_dcbz32_ppc", + "clear_blocks_dcbz128_ppc", + "put_h264_chroma_mc8_altivec", + "avg_h264_chroma_mc8_altivec", + "put_h264_qpel16_h_lowpass_altivec", + "avg_h264_qpel16_h_lowpass_altivec", + "put_h264_qpel16_v_lowpass_altivec", + "avg_h264_qpel16_v_lowpass_altivec", + "put_h264_qpel16_hv_lowpass_altivec", + "avg_h264_qpel16_hv_lowpass_altivec", + "" +}; +#include <stdio.h> +#endif + +#ifdef CONFIG_POWERPC_PERF +void powerpc_display_perf_report(void) +{ + int i, j; + av_log(NULL, AV_LOG_INFO, "PowerPC performance report\n Values are from the PMC registers, and represent whatever the registers are set to record.\n"); + for(i = 0 ; i < powerpc_perf_total ; i++) + { + for (j = 0; j < POWERPC_NUM_PMC_ENABLED ; j++) + { + if (perfdata[j][i][powerpc_data_num] != (unsigned long long)0) + av_log(NULL, AV_LOG_INFO, + " Function \"%s\" (pmc%d):\n\tmin: %"PRIu64"\n\tmax: %"PRIu64"\n\tavg: %1.2lf (%"PRIu64")\n", + perfname[i], + j+1, + perfdata[j][i][powerpc_data_min], + perfdata[j][i][powerpc_data_max], + (double)perfdata[j][i][powerpc_data_sum] / + (double)perfdata[j][i][powerpc_data_num], + perfdata[j][i][powerpc_data_num]); + } + } +} +#endif /* CONFIG_POWERPC_PERF */ + +/* ***** WARNING ***** WARNING ***** WARNING ***** */ +/* + clear_blocks_dcbz32_ppc will not work properly + on PowerPC processors with a cache line size + not equal to 32 bytes. + Fortunately all processor used by Apple up to + at least the 7450 (aka second generation G4) + use 32 bytes cache line. + This is due to the use of the 'dcbz' instruction. + It simply clear to zero a single cache line, + so you need to know the cache line size to use it ! + It's absurd, but it's fast... + + update 24/06/2003 : Apple released yesterday the G5, + with a PPC970. cache line size : 128 bytes. Oups. + The semantic of dcbz was changed, it always clear + 32 bytes. so the function below will work, but will + be slow. So I fixed check_dcbz_effect to use dcbzl, + which is defined to clear a cache line (as dcbz before). + So we still can distinguish, and use dcbz (32 bytes) + or dcbzl (one cache line) as required. + + see <http://developer.apple.com/technotes/tn/tn2087.html> + and <http://developer.apple.com/technotes/tn/tn2086.html> +*/ +void clear_blocks_dcbz32_ppc(DCTELEM *blocks) +{ +POWERPC_PERF_DECLARE(powerpc_clear_blocks_dcbz32, 1); + register int misal = ((unsigned long)blocks & 0x00000010); + register int i = 0; +POWERPC_PERF_START_COUNT(powerpc_clear_blocks_dcbz32, 1); +#if 1 + if (misal) { + ((unsigned long*)blocks)[0] = 0L; + ((unsigned long*)blocks)[1] = 0L; + ((unsigned long*)blocks)[2] = 0L; + ((unsigned long*)blocks)[3] = 0L; + i += 16; + } + for ( ; i < sizeof(DCTELEM)*6*64-31 ; i += 32) { +#ifndef __MWERKS__ + asm volatile("dcbz %0,%1" : : "b" (blocks), "r" (i) : "memory"); +#else + __dcbz( blocks, i ); +#endif + } + if (misal) { + ((unsigned long*)blocks)[188] = 0L; + ((unsigned long*)blocks)[189] = 0L; + ((unsigned long*)blocks)[190] = 0L; + ((unsigned long*)blocks)[191] = 0L; + i += 16; + } +#else + memset(blocks, 0, sizeof(DCTELEM)*6*64); +#endif +POWERPC_PERF_STOP_COUNT(powerpc_clear_blocks_dcbz32, 1); +} + +/* same as above, when dcbzl clear a whole 128B cache line + i.e. the PPC970 aka G5 */ +#ifdef HAVE_DCBZL +void clear_blocks_dcbz128_ppc(DCTELEM *blocks) +{ +POWERPC_PERF_DECLARE(powerpc_clear_blocks_dcbz128, 1); + register int misal = ((unsigned long)blocks & 0x0000007f); + register int i = 0; +POWERPC_PERF_START_COUNT(powerpc_clear_blocks_dcbz128, 1); +#if 1 + if (misal) { + // we could probably also optimize this case, + // but there's not much point as the machines + // aren't available yet (2003-06-26) + memset(blocks, 0, sizeof(DCTELEM)*6*64); + } + else + for ( ; i < sizeof(DCTELEM)*6*64 ; i += 128) { + asm volatile("dcbzl %0,%1" : : "b" (blocks), "r" (i) : "memory"); + } +#else + memset(blocks, 0, sizeof(DCTELEM)*6*64); +#endif +POWERPC_PERF_STOP_COUNT(powerpc_clear_blocks_dcbz128, 1); +} +#else +void clear_blocks_dcbz128_ppc(DCTELEM *blocks) +{ + memset(blocks, 0, sizeof(DCTELEM)*6*64); +} +#endif + +#ifdef HAVE_DCBZL +/* check dcbz report how many bytes are set to 0 by dcbz */ +/* update 24/06/2003 : replace dcbz by dcbzl to get + the intended effect (Apple "fixed" dcbz) + unfortunately this cannot be used unless the assembler + knows about dcbzl ... */ +long check_dcbzl_effect(void) +{ + register char *fakedata = (char*)av_malloc(1024); + register char *fakedata_middle; + register long zero = 0; + register long i = 0; + long count = 0; + + if (!fakedata) + { + return 0L; + } + + fakedata_middle = (fakedata + 512); + + memset(fakedata, 0xFF, 1024); + + /* below the constraint "b" seems to mean "Address base register" + in gcc-3.3 / RS/6000 speaks. seems to avoid using r0, so.... */ + asm volatile("dcbzl %0, %1" : : "b" (fakedata_middle), "r" (zero)); + + for (i = 0; i < 1024 ; i ++) + { + if (fakedata[i] == (char)0) + count++; + } + + av_free(fakedata); + + return count; +} +#else +long check_dcbzl_effect(void) +{ + return 0; +} +#endif + +static void prefetch_ppc(void *mem, int stride, int h) +{ + register const uint8_t *p = mem; + do { + asm volatile ("dcbt 0,%0" : : "r" (p)); + p+= stride; + } while(--h); +} + +void dsputil_init_ppc(DSPContext* c, AVCodecContext *avctx) +{ + // Common optimizations whether Altivec is available or not + c->prefetch = prefetch_ppc; + switch (check_dcbzl_effect()) { + case 32: + c->clear_blocks = clear_blocks_dcbz32_ppc; + break; + case 128: + c->clear_blocks = clear_blocks_dcbz128_ppc; + break; + default: + break; + } + +#ifdef HAVE_ALTIVEC + if(ENABLE_H264_DECODER) dsputil_h264_init_ppc(c, avctx); + + if (has_altivec()) { + mm_flags |= MM_ALTIVEC; + + dsputil_init_altivec(c, avctx); + if(ENABLE_SNOW_DECODER) snow_init_altivec(c, avctx); + if(ENABLE_VC1_DECODER || ENABLE_WMV3_DECODER) + vc1dsp_init_altivec(c, avctx); + float_init_altivec(c, avctx); + c->gmc1 = gmc1_altivec; + +#ifdef CONFIG_ENCODERS + if (avctx->dct_algo == FF_DCT_AUTO || + avctx->dct_algo == FF_DCT_ALTIVEC) + { + c->fdct = fdct_altivec; + } +#endif //CONFIG_ENCODERS + + if (avctx->lowres==0) + { + if ((avctx->idct_algo == FF_IDCT_AUTO) || + (avctx->idct_algo == FF_IDCT_ALTIVEC)) + { + c->idct_put = idct_put_altivec; + c->idct_add = idct_add_altivec; + c->idct_permutation_type = FF_TRANSPOSE_IDCT_PERM; + } + } + +#ifdef CONFIG_POWERPC_PERF + { + int i, j; + for (i = 0 ; i < powerpc_perf_total ; i++) + { + for (j = 0; j < POWERPC_NUM_PMC_ENABLED ; j++) + { + perfdata[j][i][powerpc_data_min] = 0xFFFFFFFFFFFFFFFFULL; + perfdata[j][i][powerpc_data_max] = 0x0000000000000000ULL; + perfdata[j][i][powerpc_data_sum] = 0x0000000000000000ULL; + perfdata[j][i][powerpc_data_num] = 0x0000000000000000ULL; + } + } + } +#endif /* CONFIG_POWERPC_PERF */ + } +#endif /* HAVE_ALTIVEC */ +} |