| Age | Commit message (Collapse) | Author |
|---|
|
When a stream doesn't start with an IDR frame, there will be several
seconds of bad frames and not setting PTS on those frames causes an
unnecessary delay in syncing audio and video.
|
|
When a stream doesn't start with an IDR frame, then frame size isn't
known, but all frames up to an IDR frame are reported as bad frames.
In such a case, a frame of size 1x1 will be allocated as xine-lib
cannot handle 0x0 frames properly, i. e. many output drivers simply
crash.
|
|
|
|
|
|
The attached patch to xine-lib adds two more real codec search paths.
/usr/lib/real is encountered in PLF packages for Mandriva, and
/usr/lib/RealPlayer10GOLD/codecs is encountered in RealPlayer package of
Mandriva.
|
|
|
|
Only build-tested due to lack of sample data.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
It happend that the previously shown frame was still on screen
while the decoder reused it already and the result was a mixed
picture on screen.
Protection is easy: just keep a reference to previously shown
frame and it cannot be reused by the decoder until a frame
duration has passed which should be sufficient to see the
current frame on screen.
Such referencing has already been implemented although it was
not used for deinterlacing. Therefore it had been disabled to
get an additional frame for decoding in coping with dropped
frames.
The change reenables referencing the previously shown frame.
|
|
While disabling for progressive frames was ment to improve DVD
playback, it turned out that many TV broadcasters set this flag
too, although their content is not progressive.
Adding an option allows the user now to enable this feature when
the watched streams make correct use of this flag.
Another option allows to disable bob deinterlacing when a scaled
OSD is on screen. As bobbing adds some noise to horizontal lines
the OSD quality might be improved by enabling this option.
|
|
When xine-ui switches to fullscreen mode or back again, it will
change the drawable by sending XINE_GUI_SEND_DRAWABLE_CHANGED.
This may lead to BadDrawable X Errors when the video out thread
is still using the old drawable for drawing.
The changes below block XINE_GUI_SEND_DRAWABLE_CHANGED from
changing the drawable while it is used for drawing.
|
|
|
|
|
|
|
|
|
|
xine_spudvb_decoder.c has hardcoded frame size (720x576).
While this is fine for most dvb channels, some channels have smaller frame
size (e.g. 544x576) but the dvb subs bitmaps are however still 720 width.
In such case, some right aligned subs appear truncated.
This patch adds a (very basic) function to downscale subs to fit frame width.
|
|
|
|
|
|
Le dimanche 24 décembre 2006 13:38, Miguel Freitas a écrit:
> Hi Christophe,
>
> On 12/8/06, Christophe Thommeret <hftom@free.fr> wrote:
> > Here is a patch that makes use of different colors for typeface tags.
> > It uses yellow for italics and red for bold.
>
> this is an interesting idea and i agree it is probably better to use
> the "ogm" rendering functions for other formats as well.
>
> however i have one problem with this change: it will override user's
> selection of "ui.osd.text_palette".
>
> how can we implement this without losing ability to select font color?
>
> Miguel
Well, seems i've forgot this one ;)
This new patch honors ui.osd.text_palette
|
|
Actually, audio_decoder_loop stores audio streams in ascending buffer type
order. So, for example a stream with buffer type BUF_AUDIO_A52|channel_num
will always be stored in audio_track_map array before any mpegaudio stream.
This breaks the stream order known by TS demuxer and so a user can get a52
french audio when selecting "deu" ! Bad again. This patch fixes that.
|
|
With current code, ts demuxer stores audio tracks in the order it finds it in
PMT, but doesn't correctly set the buffer type so stream's audio_track_map
may (and often) have a different order and so a user can get german audio
when selecting "ita" ! Bad. This patch fixes that.
It also fixes get_optional_data to return correct spu lang instead of none.
|
|
|
|
According to bug 1773769, this breaks foo->open().
The fix (as used in Ville Skyttä's patch, which doesn't cover all cases) is
to replace this with (foo->open)().
This patch was generated using
sed -i -re 's/(([[:alnum:]_]+(->|\.))+open) ?\(/(\1) (/' `grep '[>.]open \?(' include -rIl`
One change (in a comment) is not committed.
|
|
The cause was that the resampling code was using only the samples in the buffer
but not really handling the transition between two buffers (which it would
handle completely independently). The new code remembers the last sample from
the previous buffer and uses it in the resampling. We therefore end up one
sample behind and without the clicks.
|
|
Remove the DVB driver installation instructions in favour of a pointer to the
"getting started" section of the LinuxTV wiki.
Add a pointer to the scan documentation (same site).
Mention the requirement for membership of group "video".
|
|
|
|
|
|
|
|
--HG--
extra : transplant_source : %B9%3C%C1%06%8C%00%E4%3C%9Fl%C4%EA/%CA%E0%F4%9DaG%93
|
|
|
|
I noticed that goom visualization plug-in doesn't work / freezes at some
combination of bit rates and its FPS.
Digging through it I found that algorithm that dispatches sound data to goom
is buggy, and so I have rewrote/cleaned it a lot.
Let me explain what is wrong:
I am talking about goom_port_put_buffer
in /xine-lib-1.1.7/src/post/goom/xine_goom.c
The counter this->skip_frame is supposed to hold count of frames that goom
should skip because of _video render unable to render video_.
But that algorithm also skips frames on its own, and still decrements that
counter.
So it goes negative, and no frames are displayed.
Basically to fix that you need to add
if (this->skip_frame > 0)
before this->skip_frame--;
But since I want to fix that properly I decided to learn why goom skips frames
on its own, and I now understand that whole algorithm is buggy.
Thus I reimplemented it properly.
I tested it , and it works with all my sound files, also I added lot of debug
printfs to test whenever it works as expected, and it does.
--HG--
extra : transplant_source : %B6%0C%09%D6%93%B8%00cj%3B8%C7%B5%0B%DB%21%08%92%3E%7B
|
|
|
|
Intent is to allow front ends to rename their old, badly-named, config items.
|
|
|
|
|
|
to connections list
|
|
Without copying stream up, _x_post_restore_video_frame() will reset the
native frame's stream to the value at _x_post_intercept_video_frame(),
which is typically NULL. This behaviour differs from normal frame
processing, i. e. without postprocessing.
Copying the stream up reveals that stream refcounting was missing
in several postprocessing functions, which is hereby added.
--HG--
extra : transplant_source : I%F1%0B%86%B5%5E%5D%10_6%BC%B6%BCPZ%11%04y%83/
|
|
Blending functions like _x_blend_xx44() take care to clip the overlay
against the destination bitmap. The same clipping must be applied to
determine the relevant area in the destination bitmap for the call to
XvMCCompositeSubpicture().
|
|
Thanks to Harald Sitter from Amarok team for reporting a testcase.
|
|
|
