/* 
 * Copyright (C) 2000-2001 the xine project
 * 
 * This file is part of xine, a unix video player.
 * 
 * xine is free software; you can redistribute it and/or modify
 * it under the terms of the GNU General Public License as published by
 * the Free Software Foundation; either version 2 of the License, or
 * (at your option) any later version.
 * 
 * xine is distributed in the hope that it will be useful,
 * but WITHOUT ANY WARRANTY; without even the implied warranty of
 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
 * GNU General Public License for more details.
 * 
 * You should have received a copy of the GNU General Public License
 * along with this program; if not, write to the Free Software
 * Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA  02111-1307, USA
 *
 * $Id: audio_out.h,v 1.19 2001/11/04 22:49:38 guenter Exp $
 */
#ifndef HAVE_AUDIO_OUT_H
#define HAVE_AUDIO_OUT_H

#ifdef __cplusplus
extern "C" {
#endif

#include <inttypes.h>

#if defined(XINE_COMPILE)
#include "metronom.h"
#include "configfile.h"
#endif


#define AUDIO_OUT_IFACE_VERSION  2

/*
 * ao_driver_s contains the driver every audio output
 * driver plugin has to implement.
 */

typedef struct ao_driver_s ao_driver_t;

struct ao_driver_s {

  /* 
   *
   * find out what output modes + capatilities are supported by 
   * this plugin (constants for the bit vector to return see above)
   *
   * See AO_CAP_* bellow.
   */
  uint32_t (*get_capabilities) (ao_driver_t *this);

  /*
   * open the driver and make it ready to receive audio data 
   * buffers may be flushed(!)
   *
   * return value: 0 : failure, >0 : output sample rate
   */
  int (*open)(ao_driver_t *this, uint32_t bits, uint32_t rate, int mode);

  /* return the number of audio channels
   */
  int (*num_channels)(ao_driver_t *self_gen);

  /* return the number of bytes per frame.
   * A frame is equivalent to one sample being output on every audio channel.
   */
  int (*bytes_per_frame)(ao_driver_t *self_gen);

  /* return the delay is frames measured by 
   * looking at pending samples in the audio output device
   */
  int (*delay)(ao_driver_t *self_gen);

  /* 
   * return gap tolerance (in pts) needed for this driver
   */
  int (*get_gap_tolerance) (ao_driver_t *self_gen);

  /*
   * write audio data to output buffer 
   * audio driver must sync sample playback with metronom
   * return value: 
   *   1 => audio samples were processed ok
   *   0 => audio samples were not yet processed, 
   *        call write_audio_data with the _same_ samples again
   */
  int (*write)(ao_driver_t *this,
			  int16_t* audio_data, uint32_t num_samples);

  /*
   * this is called when the decoder no longer uses the audio
   * output driver - the driver should get ready to get opened() again
   */
  void (*close)(ao_driver_t *this);

  /*
   * shut down this audio output driver plugin and
   * free all resources allocated
   */
  void (*exit) (ao_driver_t *this);

  /*
   * Get, Set a property of audio driver.
   *
   * get_property() return 1 in success, 0 on failure.
   * set_property() return value on success, ~value on failure.
   *
   * See AC_PROP_* bellow for available properties.
   */
  int (*get_property) (ao_driver_t *this, int property);

  int (*set_property) (ao_driver_t *this,  int property, int value);

};

/*
 * ao_instance_s contains the instance every audio decoder talks to
 */
typedef struct ao_instance_s ao_instance_t;

struct ao_instance_s {
  uint32_t (*get_capabilities) (ao_instance_t *this); /* for constants see below */

  /*
   * Get/Set audio property
   *
   * See AO_PROP_* bellow
   */
  int (*get_property) (ao_instance_t *this, int property);
  int (*set_property) (ao_instance_t *this, int property, int value);

  /* open audio driver for audio output 
   * return value: 0:failure, >0:output sample rate
   */
  int (*open) (ao_instance_t *this,
	       uint32_t bits, uint32_t rate, int mode);

  /*
   * write audio data to output buffer
   * audio driver must sync sample playback with metronom
   * return value:
   *   1 => audio samples were processed ok
   *   0 => audio samples were not yet processed,
   *        call write_audio_data with the _same_ samples again
   */

  int (*write)(ao_instance_t *this,
	       int16_t* audio_data, uint32_t num_frames,
	       uint32_t pts);

  /* audio driver is no longer used by decoder => close */
  void (*close) (ao_instance_t *self);

  /* called on xine exit */
  void (*exit) (ao_instance_t *this);

  /* private stuff */

  ao_driver_t    *driver;
  metronom_t     *metronom;

  int             audio_loop_running;
  pthread_t       audio_thread;

  int             audio_step;           /* pts per 32 768 samples (sample = #bytes/2) */
  int32_t         frames_per_kpts;      /* frames per 1024/90000 sec                  */
  int32_t         output_frame_rate, input_frame_rate;
  double          frame_rate_factor;
  uint32_t        num_channels;
  int             audio_started;
  uint32_t        last_audio_vpts;
  int             resample_conf;
  int             force_rate;           /* force audio output rate to this value if non-zero */
  int             do_resample;
  int	 	  mode;
  int             bits;
  int             gap_tolerance;
  uint16_t       *frame_buffer;
  int16_t        *zero_space;
};

/* This initiates the audio_out sync routines
 * found in ./src/xine-engine/audio_out.c
 */
ao_instance_t *ao_new_instance (ao_driver_t *driver, metronom_t *metronom, config_values_t *config) ;
/*
 * to build a dynamic audio output plugin,
 * you have to implement these driver:
 *
 *
 * ao_driver_t *init_audio_out_plugin (config_values_t *config)
 *
 * init this plugin, check if device is available
 *
 * ao_info_t *get_audio_out_plugin_info ()
 *
 * peek at some (static) information about the plugin without initializing it
 *
 */

/*
 * audio output modes + capabilities
 */

#define AO_CAP_NOCAP            0x00000000 /* driver has no capabilities    */
#define AO_CAP_MODE_A52         0x00000001 /* driver supports A/52 output   */
#define AO_CAP_MODE_AC5         0x00000002 /* driver supports AC5 output    */
/* 1 sample ==  2 bytes (C)               */
#define AO_CAP_MODE_MONO        0x00000004 /* driver supports mono output   */
/* 1 sample ==  4 bytes (L,R)             */
#define AO_CAP_MODE_STEREO      0x00000008 /* driver supports stereo output */
/* 1 sample ==  8 bytes (L,R,LR,RR)       */
#define AO_CAP_MODE_4CHANNEL    0x00000010 /* driver supports 4 channels    */
/* 1 sample == 10 bytes (L,R,LR,RR,C)     */
#define AO_CAP_MODE_5CHANNEL    0x00000020 /* driver supports 5 channels    */
/* 1 sample == 12 bytes (L,R,LR,RR,C,LFE) */
#define AO_CAP_MODE_5_1CHANNEL  0x00000040 /* driver supports 5.1 channels  */
#define AO_CAP_MIXER_VOL        0x00000080 /* driver supports mixer control */
#define AO_CAP_PCM_VOL          0x00000100 /* driver supports pcm control   */
#define AO_CAP_MUTE_VOL         0x00000200 /* driver can mute volume        */

/* properties supported by get/set_property() */
#define AO_PROP_MIXER_VOL       0
#define AO_PROP_PCM_VOL         1
#define AO_PROP_MUTE_VOL        2

typedef struct ao_info_s {

  int     interface_version;
  char   *id;
  char   *description;
  int     priority;
} ao_info_t ;

#ifdef __cplusplus
}
#endif

#endif