merge: http://linuxtv.org/hg/~mkrufky/cxusb

From: Mauro Carvalho Chehab <mchehab@infradead.org>


Priority: normal

Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>

12 files changed, 258 insertions, 172 deletions

diff --git a/linux/drivers/media/video/ivtv/ivtv-driver.c b/linux/drivers/media/video/ivtv/ivtv-driver.c
index efdb59193..89a16bfeb 100644
--- a/linux/drivers/media/video/ivtv/ivtv-driver.c
+++ b/linux/drivers/media/video/ivtv/ivtv-driver.c
@@ -688,7 +688,7 @@ static int __devinit ivtv_init_struct1(struct ivtv *itv)
 	spin_lock_init(&itv->lock);
 	spin_lock_init(&itv->dma_reg_lock);
 
-	itv->irq_work_queues = create_workqueue(itv->name);
+	itv->irq_work_queues = create_singlethread_workqueue(itv->name);
 	if (itv->irq_work_queues == NULL) {
 		IVTV_ERR("Could not create ivtv workqueue\n");
 		return -1;
diff --git a/linux/drivers/media/video/ivtv/ivtv-driver.h b/linux/drivers/media/video/ivtv/ivtv-driver.h
index d66ee14b6..6e0ca223a 100644
--- a/linux/drivers/media/video/ivtv/ivtv-driver.h
+++ b/linux/drivers/media/video/ivtv/ivtv-driver.h
@@ -252,6 +252,7 @@ struct ivtv_mailbox_data {
 #define IVTV_F_I_DEC_PAUSED	   20 	/* the decoder is paused */
 #define IVTV_F_I_INITED		   21 	/* set after first open */
 #define IVTV_F_I_FAILED		   22 	/* set if first open failed */
+#define IVTV_F_I_WORK_INITED       23	/* worker thread was initialized */
 
 /* Event notifications */
 #define IVTV_F_I_EV_DEC_STOPPED	   28	/* decoder stopped event */
diff --git a/linux/drivers/media/video/ivtv/ivtv-irq.c b/linux/drivers/media/video/ivtv/ivtv-irq.c
index d5ac766c1..59fe56171 100644
--- a/linux/drivers/media/video/ivtv/ivtv-irq.c
+++ b/linux/drivers/media/video/ivtv/ivtv-irq.c
@@ -82,6 +82,13 @@ void ivtv_irq_work_handler(void *arg)
 
 	DEFINE_WAIT(wait);
 
+	if (test_and_clear_bit(IVTV_F_I_WORK_INITED, &itv->i_flags)) {
+		struct sched_param param = { .sched_priority = 99 };
+
+		/* This thread must use the FIFO scheduler as it
+		   is realtime sensitive. */
+		sched_setscheduler(current, SCHED_FIFO, &param);
+	}
 	if (test_and_clear_bit(IVTV_F_I_WORK_HANDLER_PIO, &itv->i_flags))
 		ivtv_pio_work_handler(itv);
 
@@ -684,34 +691,14 @@ static void ivtv_irq_enc_start_cap(struct ivtv *itv)
 
 static void ivtv_irq_enc_vbi_cap(struct ivtv *itv)
 {
-	struct ivtv_stream *s_mpg = &itv->streams[IVTV_ENC_STREAM_TYPE_MPG];
 	u32 data[CX2341X_MBOX_MAX_DATA];
 	struct ivtv_stream *s;
 
 	IVTV_DEBUG_HI_IRQ("ENC START VBI CAP\n");
 	s = &itv->streams[IVTV_ENC_STREAM_TYPE_VBI];
 
-	/* If more than two VBI buffers are pending, then
-	   clear the old ones and start with this new one.
-	   This can happen during transition stages when MPEG capturing is
-	   started, but the first interrupts haven't arrived yet. During
-	   that period VBI requests can accumulate without being able to
-	   DMA the data. Since at most four VBI DMA buffers are available,
-	   we just drop the old requests when there are already three
-	   requests queued. */
-	if (s->sg_pending_size > 2) {
-		struct ivtv_buffer *buf;
-		list_for_each_entry(buf, &s->q_predma.list, list)
-			ivtv_buf_sync_for_cpu(s, buf);
-		ivtv_queue_move(s, &s->q_predma, NULL, &s->q_free, 0);
-		s->sg_pending_size = 0;
-	}
-	/* if we can append the data, and the MPEG stream isn't capturing,
-	   then start a DMA request for just the VBI data. */
-	if (!stream_enc_dma_append(s, data) &&
-			!test_bit(IVTV_F_S_STREAMING, &s_mpg->s_flags)) {
+	if (!stream_enc_dma_append(s, data))
 		set_bit(ivtv_use_pio(s) ? IVTV_F_S_PIO_PENDING : IVTV_F_S_DMA_PENDING, &s->s_flags);
-	}
 }
 
 static void ivtv_irq_dec_vbi_reinsert(struct ivtv *itv)
diff --git a/linux/drivers/media/video/ivtv/ivtv-queue.h b/linux/drivers/media/video/ivtv/ivtv-queue.h
index 7cfc0c9ab..476556afd 100644
--- a/linux/drivers/media/video/ivtv/ivtv-queue.h
+++ b/linux/drivers/media/video/ivtv/ivtv-queue.h
@@ -23,7 +23,7 @@
 #define IVTV_QUEUE_H
 
 #define IVTV_DMA_UNMAPPED	((u32) -1)
-#define SLICED_VBI_PIO 1
+#define SLICED_VBI_PIO 0
 
 /* ivtv_buffer utility functions */
 
diff --git a/linux/drivers/media/video/ivtv/ivtv-streams.c b/linux/drivers/media/video/ivtv/ivtv-streams.c
index 54d2023b2..730e85d86 100644
--- a/linux/drivers/media/video/ivtv/ivtv-streams.c
+++ b/linux/drivers/media/video/ivtv/ivtv-streams.c
@@ -363,7 +363,7 @@ static void ivtv_vbi_setup(struct ivtv *itv)
 	/* Every X number of frames a VBI interrupt arrives (frames as in 25 or 30 fps) */
 	data[1] = 1;
 	/* The VBI frames are stored in a ringbuffer with this size (with a VBI frame as unit) */
-	data[2] = raw ? 4 : 8;
+	data[2] = raw ? 4 : 4 * (itv->vbi.raw_size / itv->vbi.enc_size);
 	/* The start/stop codes determine which VBI lines end up in the raw VBI data area.
 	   The codes are from table 24 in the saa7115 datasheet. Each raw/sliced/video line
 	   is framed with codes FF0000XX where XX is the SAV/EAV (Start/End of Active Video)
diff --git a/linux/drivers/media/video/ivtv/ivtv-vbi.c b/linux/drivers/media/video/ivtv/ivtv-vbi.c
index 71798f0da..1ce9deb11 100644
--- a/linux/drivers/media/video/ivtv/ivtv-vbi.c
+++ b/linux/drivers/media/video/ivtv/ivtv-vbi.c
@@ -293,6 +293,7 @@ static u32 compress_sliced_buf(struct ivtv *itv, u32 line, u8 *buf, u32 size, u8
 	u32 line_size = itv->vbi.sliced_decoder_line_size;
 	struct v4l2_decode_vbi_line vbi;
 	int i;
+	unsigned lines = 0;
 
 	/* find the first valid line */
 	for (i = 0; i < size; i++, buf++) {
@@ -313,7 +314,8 @@ static u32 compress_sliced_buf(struct ivtv *itv, u32 line, u8 *buf, u32 size, u8
 		}
 		vbi.p = p + 4;
 		itv->video_dec_func(itv, VIDIOC_INT_DECODE_VBI_LINE, &vbi);
-		if (vbi.type) {
+		if (vbi.type && !(lines & (1 << vbi.line))) {
+			lines |= 1 << vbi.line;
 			itv->vbi.sliced_data[line].id = vbi.type;
 			itv->vbi.sliced_data[line].field = vbi.is_second_field;
 			itv->vbi.sliced_data[line].line = vbi.line;
diff --git a/linux/drivers/media/video/v4l2-common.c b/linux/drivers/media/video/v4l2-common.c
index 0eb498a08..b5baf8f7e 100644
--- a/linux/drivers/media/video/v4l2-common.c
+++ b/linux/drivers/media/video/v4l2-common.c
@@ -387,6 +387,7 @@ const char *v4l2_ctrl_get_name(u32 id)
 	case V4L2_CID_MPEG_AUDIO_L1_BITRATE: 	return "Audio Layer I Bitrate";
 	case V4L2_CID_MPEG_AUDIO_L2_BITRATE: 	return "Audio Layer II Bitrate";
 	case V4L2_CID_MPEG_AUDIO_L3_BITRATE: 	return "Audio Layer III Bitrate";
+	case V4L2_CID_MPEG_AUDIO_AAC_BITRATE: 	return "Audio AAC Bitrate";
 	case V4L2_CID_MPEG_AUDIO_AC3_BITRATE: 	return "Audio AC-3 Bitrate";
 	case V4L2_CID_MPEG_AUDIO_MODE: 		return "Audio Stereo Mode";
 	case V4L2_CID_MPEG_AUDIO_MODE_EXTENSION: return "Audio Stereo Mode Extension";
@@ -549,6 +550,8 @@ int v4l2_ctrl_query_fill_std(struct v4l2_queryctrl *qctrl)
 				V4L2_MPEG_AUDIO_L3_BITRATE_32K,
 				V4L2_MPEG_AUDIO_L3_BITRATE_320K, 1,
 				V4L2_MPEG_AUDIO_L3_BITRATE_192K);
+	case V4L2_CID_MPEG_AUDIO_AAC_BITRATE:
+		return v4l2_ctrl_query_fill(qctrl, 0, 6400, 1, 3200000);
 	case V4L2_CID_MPEG_AUDIO_AC3_BITRATE:
 		return v4l2_ctrl_query_fill(qctrl,
 				V4L2_MPEG_AUDIO_AC3_BITRATE_32K,
diff --git a/linux/drivers/media/video/v4l2-dev.c b/linux/drivers/media/video/v4l2-dev.c
index 398376a40..d97320091 100644
--- a/linux/drivers/media/video/v4l2-dev.c
+++ b/linux/drivers/media/video/v4l2-dev.c
@@ -356,10 +356,8 @@ int video_register_device_index(struct video_device *vfd, int type, int nr,
 
 	/* sysfs class */
 	memset(&vfd->dev, 0x00, sizeof(vfd->dev));
-#if LINUX_VERSION_CODE >= KERNEL_VERSION(2, 6, 18)
 	vfd->dev.class = &video_class;
 	vfd->dev.devt = MKDEV(VIDEO_MAJOR, vfd->minor);
-#endif
 #if LINUX_VERSION_CODE < KERNEL_VERSION(2, 6, 19)
 	if (vfd->parent)
 		vfd->dev.dev = vfd->parent;
diff --git a/linux/include/linux/videodev2.h b/linux/include/linux/videodev2.h
index cdb0e378a..9e699d0b8 100644
--- a/linux/include/linux/videodev2.h
+++ b/linux/include/linux/videodev2.h
@@ -988,7 +988,8 @@ enum v4l2_mpeg_audio_crc {
 	V4L2_MPEG_AUDIO_CRC_CRC16 = 1,
 };
 #define V4L2_CID_MPEG_AUDIO_MUTE 		(V4L2_CID_MPEG_BASE+109)
-#define V4L2_CID_MPEG_AUDIO_AC3_BITRATE		(V4L2_CID_MPEG_BASE+110)
+#define V4L2_CID_MPEG_AUDIO_AAC_BITRATE		(V4L2_CID_MPEG_BASE+110)
+#define V4L2_CID_MPEG_AUDIO_AC3_BITRATE		(V4L2_CID_MPEG_BASE+111)
 enum v4l2_mpeg_audio_ac3_bitrate {
 	V4L2_MPEG_AUDIO_AC3_BITRATE_32K  = 0,
 	V4L2_MPEG_AUDIO_AC3_BITRATE_40K  = 1,
diff --git a/v4l/scripts/checkpatch.pl b/v4l/scripts/checkpatch.pl
index 6971bf078..bc6779398 100755
--- a/v4l/scripts/checkpatch.pl
+++ b/v4l/scripts/checkpatch.pl
@@ -9,7 +9,7 @@ use strict;
 my $P = $0;
 $P =~ s@.*/@@g;
 
-my $V = '0.19';
+my $V = '0.21';
 
 use Getopt::Long qw(:config no_auto_abbrev);
 
@@ -17,7 +17,6 @@ my $quiet = 0;
 my $tree = 1;
 my $chk_signoff = 1;
 my $chk_patch = 1;
-my $tst_type = 0;
 my $tst_only;
 my $emacs = 0;
 my $terse = 0;
@@ -44,7 +43,6 @@ GetOptions(
 	'summary-file!'	=> \$summary_file,
 
 	'debug=s'	=> \%debug,
-	'test-type!'	=> \$tst_type,
 	'test-only=s'	=> \$tst_only,
 ) or exit;
 
@@ -67,6 +65,7 @@ if ($#ARGV < 0) {
 
 my $dbg_values = 0;
 my $dbg_possible = 0;
+my $dbg_type = 0;
 for my $key (keys %debug) {
 	eval "\${dbg_$key} = '$debug{$key}';"
 }
@@ -169,24 +168,23 @@ our @modifierList = (
 );
 
 sub build_types {
-	my $mods = "(?:  \n" . join("|\n  ", @modifierList) . "\n)";
-	my $all = "(?:  \n" . join("|\n  ", @typeList) . "\n)";
+	my $mods = "(?x:  \n" . join("|\n  ", @modifierList) . "\n)";
+	my $all = "(?x:  \n" . join("|\n  ", @typeList) . "\n)";
+	$Modifier	= qr{(?:$Attribute|$Sparse|$mods)};
 	$NonptrType	= qr{
-			(?:const\s+)?
-			(?:$mods\s+)?
+			(?:$Modifier\s+|const\s+)*
 			(?:
 				(?:typeof|__typeof__)\s*\(\s*\**\s*$Ident\s*\)|
 				(?:${all}\b)
 			)
-			(?:\s+$Sparse|\s+const)*
+			(?:\s+$Modifier|\s+const)*
 		  }x;
 	$Type	= qr{
 			$NonptrType
 			(?:\s*\*+\s*const|\s*\*+|(?:\s*\[\s*\])+)?
-			(?:\s+$Inline|\s+$Sparse|\s+$Attribute|\s+$mods)*
+			(?:\s+$Inline|\s+$Modifier)*
 		  }x;
 	$Declare	= qr{(?:$Storage\s+)?$Type};
-	$Modifier	= qr{(?:$Attribute|$Sparse|$mods)};
 }
 build_types();
 
@@ -470,7 +468,9 @@ sub ctx_statement_block {
 		}
 		$off++;
 	}
+	# We are truly at the end, so shuffle to the next line.
 	if ($off == $len) {
+		$loff = $len + 1;
 		$line++;
 		$remain--;
 	}
@@ -631,7 +631,7 @@ sub ctx_locate_comment {
 	my ($first_line, $end_line) = @_;
 
 	# Catch a comment on the end of the line itself.
-	my ($current_comment) = ($rawlines[$end_line - 1] =~ m@.*(/\*.*\*/)\s*$@);
+	my ($current_comment) = ($rawlines[$end_line - 1] =~ m@.*(/\*.*\*/)\s*(?:\\\s*)?$@);
 	return $current_comment if (defined $current_comment);
 
 	# Look through the context and try and figure out if there is a
@@ -689,17 +689,20 @@ sub cat_vet {
 my $av_preprocessor = 0;
 my $av_pending;
 my @av_paren_type;
+my $av_pend_colon;
 
 sub annotate_reset {
 	$av_preprocessor = 0;
 	$av_pending = '_';
 	@av_paren_type = ('E');
+	$av_pend_colon = 'O';
 }
 
 sub annotate_values {
 	my ($stream, $type) = @_;
 
 	my $res;
+	my $var = '_' x length($stream);
 	my $cur = $stream;
 
 	print "$stream\n" if ($dbg_values > 1);
@@ -715,10 +718,14 @@ sub annotate_values {
 				$av_preprocessor = 0;
 			}
 
-		} elsif ($cur =~ /^($Type)/) {
+		} elsif ($cur =~ /^($Type)\s*(?:$Ident|,|\)|\()/) {
 			print "DECLARE($1)\n" if ($dbg_values > 1);
 			$type = 'T';
 
+		} elsif ($cur =~ /^($Modifier)\s*/) {
+			print "MODIFIER($1)\n" if ($dbg_values > 1);
+			$type = 'T';
+
 		} elsif ($cur =~ /^(\#\s*define\s*$Ident)(\(?)/o) {
 			print "DEFINE($1,$2)\n" if ($dbg_values > 1);
 			$av_preprocessor = 1;
@@ -780,7 +787,12 @@ sub annotate_values {
 			$av_pending = 'N';
 			$type = 'N';
 
-		} elsif ($cur =~/^(return|case|else)/o) {
+		} elsif ($cur =~/^(case)/o) {
+			print "CASE($1)\n" if ($dbg_values > 1);
+			$av_pend_colon = 'C';
+			$type = 'N';
+
+		} elsif ($cur =~/^(return|else|goto)/o) {
 			print "KEYWORD($1)\n" if ($dbg_values > 1);
 			$type = 'N';
 
@@ -800,10 +812,20 @@ sub annotate_values {
 				print "PAREN('$1')\n" if ($dbg_values > 1);
 			}
 
-		} elsif ($cur =~ /^($Ident)\(/o) {
+		} elsif ($cur =~ /^($Ident)\s*\(/o) {
 			print "FUNC($1)\n" if ($dbg_values > 1);
+			$type = 'V';
 			$av_pending = 'V';
 
+		} elsif ($cur =~ /^($Ident\s*):/) {
+			if ($type eq 'E') {
+				$av_pend_colon = 'L';
+			} elsif ($type eq 'T') {
+				$av_pend_colon = 'B';
+			}
+			print "IDENT_COLON($1,$type>$av_pend_colon)\n" if ($dbg_values > 1);
+			$type = 'V';
+
 		} elsif ($cur =~ /^($Ident|$Constant)/o) {
 			print "IDENT($1)\n" if ($dbg_values > 1);
 			$type = 'V';
@@ -815,11 +837,40 @@ sub annotate_values {
 		} elsif ($cur =~/^(;|{|})/) {
 			print "END($1)\n" if ($dbg_values > 1);
 			$type = 'E';
+			$av_pend_colon = 'O';
+
+		} elsif ($cur =~ /^(\?)/o) {
+			print "QUESTION($1)\n" if ($dbg_values > 1);
+			$type = 'N';
 
-		} elsif ($cur =~ /^(;|\?|:|\[)/o) {
+		} elsif ($cur =~ /^(:)/o) {
+			print "COLON($1,$av_pend_colon)\n" if ($dbg_values > 1);
+
+			substr($var, length($res), 1, $av_pend_colon);
+			if ($av_pend_colon eq 'C' || $av_pend_colon eq 'L') {
+				$type = 'E';
+			} else {
+				$type = 'N';
+			}
+			$av_pend_colon = 'O';
+
+		} elsif ($cur =~ /^(;|\[)/o) {
 			print "CLOSE($1)\n" if ($dbg_values > 1);
 			$type = 'N';
 
+		} elsif ($cur =~ /^(-(?![->])|\+(?!\+)|\*|\&(?!\&))/o) {
+			my $variant;
+
+			print "OPV($1)\n" if ($dbg_values > 1);
+			if ($type eq 'V') {
+				$variant = 'B';
+			} else {
+				$variant = 'U';
+			}
+
+			substr($var, length($res), 1, $variant);
+			$type = 'N';
+
 		} elsif ($cur =~ /^($Operators)/o) {
 			print "OP($1)\n" if ($dbg_values > 1);
 			if ($1 ne '++' && $1 ne '--') {
@@ -835,17 +886,17 @@ sub annotate_values {
 		}
 	}
 
-	return $res;
+	return ($res, $var);
 }
 
 sub possible {
 	my ($possible, $line) = @_;
 
 	print "CHECK<$possible> ($line)\n" if ($dbg_possible > 1);
-	if ($possible !~ /^(?:$Storage|$Type|DEFINE_\S+)$/ &&
+	if ($possible !~ /^(?:$Modifier|$Storage|$Type|DEFINE_\S+)$/ &&
 	    $possible ne 'goto' && $possible ne 'return' &&
 	    $possible ne 'case' && $possible ne 'else' &&
-	    $possible ne 'asm' &&
+	    $possible ne 'asm' && $possible ne '__asm__' &&
 	    $possible !~ /^(typedef|struct|enum)\b/) {
 		# Check for modifiers.
 		$possible =~ s/\s*$Storage\s*//g;
@@ -854,8 +905,10 @@ sub possible {
 
 		} elsif ($possible =~ /\s/) {
 			$possible =~ s/\s*$Type\s*//g;
-			warn "MODIFIER: $possible ($line)\n" if ($dbg_possible);
-			push(@modifierList, $possible);
+			for my $modifier (split(' ', $possible)) {
+				warn "MODIFIER: $modifier ($possible) ($line)\n" if ($dbg_possible);
+				push(@modifierList, $modifier);
+			}
 
 		} else {
 			warn "POSSIBLE: $possible ($line)\n" if ($dbg_possible);
@@ -1135,7 +1188,9 @@ sub process {
 		}
 #80 column limit
 		if ($line =~ /^\+/ && $prevrawline !~ /\/\*\*/ &&
-		    $rawline !~ /^.\s*\*\s*\@$Ident\s/ && $length > 80)
+		    $rawline !~ /^.\s*\*\s*\@$Ident\s/ &&
+		    $line !~ /^\+\s*printk\s*\(\s*(?:KERN_\S+\s*)?"[X\t]*"\s*(?:,|\)\s*;)\s*$/ &&
+		    $length > 80)
 		{
 			WARN("line over 80 characters\n" . $herecurr);
 		}
@@ -1162,10 +1217,10 @@ sub process {
 		}
 
 # Check for potential 'bare' types
-		my ($stat, $cond);
+		my ($stat, $cond, $line_nr_next, $remain_next);
 		if ($realcnt && $line =~ /.\s*\S/) {
-			($stat, $cond) = ctx_statement_block($linenr,
-								$realcnt, 0);
+			($stat, $cond, $line_nr_next, $remain_next) =
+				ctx_statement_block($linenr, $realcnt, 0);
 			$stat =~ s/\n./\n /g;
 			$cond =~ s/\n./\n /g;
 
@@ -1179,7 +1234,7 @@ sub process {
 			} elsif ($s =~ /^.\s*$Ident\s*\(/s) {
 
 			# declarations always start with types
-			} elsif ($prev_values eq 'E' && $s =~ /^.\s*(?:$Storage\s+)?(?:$Inline\s+)?(?:const\s+)?((?:\s*$Ident)+)\b(?:\s+$Sparse)?\s*\**\s*(?:$Ident|\(\*[^\)]*\))\s*(?:;|=|,|\()/s) {
+			} elsif ($prev_values eq 'E' && $s =~ /^.\s*(?:$Storage\s+)?(?:$Inline\s+)?(?:const\s+)?((?:\s*$Ident)+?)\b(?:\s+$Sparse)?\s*\**\s*(?:$Ident|\(\*[^\)]*\))(?:\s*$Modifier)?\s*(?:;|=|,|\()/s) {
 				my $type = $1;
 				$type =~ s/\s+/ /g;
 				possible($type, "A:" . $s);
@@ -1239,6 +1294,10 @@ sub process {
 				ERROR("switch and case should be at the same indent\n$hereline$err");
 			}
 		}
+		if ($line =~ /^.\s*(?:case\s*.*|default\s*):/g &&
+		    $line !~ /\G(?:\s*{)?(?:\s*$;*)(?:\s*\\)?\s*$/g) {
+			ERROR("trailing statements should be on next line\n" . $herecurr);
+		}
 
 # if/while/etc brace do not go on next line, unless defining a do while loop,
 # or if that brace on the next line is for something else
@@ -1246,17 +1305,22 @@ sub process {
 			my $pre_ctx = "$1$2";
 
 			my ($level, @ctx) = ctx_statement_level($linenr, $realcnt, 0);
-			my $ctx_ln = $linenr + $#ctx + 1;
 			my $ctx_cnt = $realcnt - $#ctx - 1;
 			my $ctx = join("\n", @ctx);
 
-			##warn "realcnt<$realcnt> ctx_cnt<$ctx_cnt>\n";
+			my $ctx_ln = $linenr;
+			my $ctx_skip = $realcnt;
 
-			# Skip over any removed lines in the context following statement.
-			while (defined($lines[$ctx_ln - 1]) && $lines[$ctx_ln - 1] =~ /^-/) {
+			while ($ctx_skip > $ctx_cnt || ($ctx_skip == $ctx_cnt &&
+					defined $lines[$ctx_ln - 1] &&
+					$lines[$ctx_ln - 1] =~ /^-/)) {
+				##print "SKIP<$ctx_skip> CNT<$ctx_cnt>\n";
+				$ctx_skip-- if (!defined $lines[$ctx_ln - 1] || $lines[$ctx_ln - 1] !~ /^-/);
 				$ctx_ln++;
 			}
-			##warn "pre<$pre_ctx>\nline<$line>\nctx<$ctx>\nnext<$lines[$ctx_ln - 1]>\n";
+
+			#print "realcnt<$realcnt> ctx_cnt<$ctx_cnt>\n";
+			#print "pre<$pre_ctx>\nline<$line>\nctx<$ctx>\nnext<$lines[$ctx_ln - 1]>\n";
 
 			if ($ctx !~ /{\s*/ && defined($lines[$ctx_ln -1]) && $lines[$ctx_ln - 1] =~ /^\+\s*{/) {
 				ERROR("that open brace { should be on the previous line\n" .
@@ -1276,12 +1340,14 @@ sub process {
 
 		# Track the 'values' across context and added lines.
 		my $opline = $line; $opline =~ s/^./ /;
-		my $curr_values = annotate_values($opline . "\n", $prev_values);
+		my ($curr_values, $curr_vars) =
+				annotate_values($opline . "\n", $prev_values);
 		$curr_values = $prev_values . $curr_values;
 		if ($dbg_values) {
 			my $outline = $opline; $outline =~ s/\t/ /g;
 			print "$linenr > .$outline\n";
 			print "$linenr > $curr_values\n";
+			print "$linenr >  $curr_vars\n";
 		}
 		$prev_values = substr($curr_values, -1);
 
@@ -1289,8 +1355,12 @@ sub process {
 		if ($line=~/^[^\+]/) {next;}
 
 # TEST: allow direct testing of the type matcher.
-		if ($tst_type && $line =~ /^.$Declare$/) {
-			ERROR("TEST: is type $Declare\n" . $herecurr);
+		if ($dbg_type) {
+			if ($line =~ /^.\s*$Declare\s*$/) {
+				ERROR("TEST: is type\n" . $herecurr);
+			} elsif ($dbg_type > 1 && $line =~ /^.+($Declare)/) {
+				ERROR("TEST: is not type ($1 is)\n". $herecurr);
+			}
 			next;
 		}
 
@@ -1365,11 +1435,11 @@ sub process {
 			ERROR("\"(foo $1 )\" should be \"(foo $1)\"\n" .
 				$herecurr);
 
-		} elsif ($line =~ m{$NonptrType(\*+)(?:\s+(?:$Attribute|$Sparse))?\s+[A-Za-z\d_]+}) {
+		} elsif ($line =~ m{\b$NonptrType(\*+)(?:\s+(?:$Attribute|$Sparse))?\s+[A-Za-z\d_]+}) {
 			ERROR("\"foo$1 bar\" should be \"foo $1bar\"\n" .
 				$herecurr);
 
-		} elsif ($line =~ m{$NonptrType\s+(\*+)(?!\s+(?:$Attribute|$Sparse))\s+[A-Za-z\d_]+}) {
+		} elsif ($line =~ m{\b$NonptrType\s+(\*+)(?!\s+(?:$Attribute|$Sparse))\s+[A-Za-z\d_]+}) {
 			ERROR("\"foo $1 bar\" should be \"foo $1bar\"\n" .
 				$herecurr);
 		}
@@ -1421,6 +1491,17 @@ sub process {
 			ERROR("open brace '{' following $1 go on the same line\n" . $hereprev);
 		}
 
+# check for spacing round square brackets; allowed:
+#  1. with a type on the left -- int [] a;
+#  2. at the beginning of a line for slice initialisers -- [0..10] = 5,
+		while ($line =~ /(.*?\s)\[/g) {
+			my ($where, $prefix) = ($-[1], $1);
+			if ($prefix !~ /$Type\s+$/ &&
+			    ($where != 0 || $prefix !~ /^.\s+$/)) {
+				ERROR("space prohibited before open square bracket '['\n" . $herecurr);
+			}
+		}
+
 # check for spaces between functions and their parentheses.
 		while ($line =~ /($Ident)\s+\(/g) {
 			my $name = $1;
@@ -1457,7 +1538,8 @@ sub process {
 				<<=|>>=|<=|>=|==|!=|
 				\+=|-=|\*=|\/=|%=|\^=|\|=|&=|
 				=>|->|<<|>>|<|>|=|!|~|
-				&&|\|\||,|\^|\+\+|--|&|\||\+|-|\*|\/|%
+				&&|\|\||,|\^|\+\+|--|&|\||\+|-|\*|\/|%|
+				\?|:
 			}x;
 			my @elements = split(/($ops|;)/, $opline);
 			my $off = 0;
@@ -1504,22 +1586,11 @@ sub process {
 				my $ptr = substr($blank, 0, $off) . "^";
 				my $hereptr = "$hereline$ptr\n";
 
-				# Classify operators into binary, unary, or
-				# definitions (* only) where they have more
-				# than one mode.
+				# Pull out the value of this operator.
 				my $op_type = substr($curr_values, $off + 1, 1);
-				my $op_left = substr($curr_values, $off, 1);
-				my $is_unary;
-				if ($op_type eq 'T') {
-					$is_unary = 2;
-				} elsif ($op_left eq 'V') {
-					$is_unary = 0;
-				} else {
-					$is_unary = 1;
-				}
-				#if ($op eq '-' || $op eq '&' || $op eq '*') {
-				#	print "UNARY: <$op_left$op_type $is_unary $a:$op:$c> <$ca:$op:$cc> <$unary_ctx>\n";
-				#}
+
+				# Get the full operator variant.
+				my $opv = $op . substr($curr_vars, $off, 1);
 
 				# Ignore operators passed as parameters.
 				if ($op_type ne 'V' &&
@@ -1538,8 +1609,10 @@ sub process {
 				# // is a comment
 				} elsif ($op eq '//') {
 
-				# -> should have no spaces
-				} elsif ($op eq '->') {
+				# No spaces for:
+				#   ->
+				#   :   when part of a bitfield
+				} elsif ($op eq '->' || $opv eq ':B') {
 					if ($ctx =~ /Wx.|.xW/) {
 						ERROR("spaces prohibited around that '$op' $at\n" . $hereptr);
 					}
@@ -1551,18 +1624,19 @@ sub process {
 					}
 
 				# '*' as part of a type definition -- reported already.
-				} elsif ($op eq '*' && $is_unary == 2) {
+				} elsif ($opv eq '*_') {
 					#warn "'*' is part of type\n";
 
 				# unary operators should have a space before and
 				# none after.  May be left adjacent to another
 				# unary operator, or a cast
 				} elsif ($op eq '!' || $op eq '~' ||
-				         ($is_unary && ($op eq '*' || $op eq '-' || $op eq '&'))) {
+					 $opv eq '*U' || $opv eq '-U' ||
+					 $opv eq '&U') {
 					if ($ctx !~ /[WEBC]x./ && $ca !~ /(?:\)|!|~|\*|-|\&|\||\+\+|\-\-|\{)$/) {
 						ERROR("space required before that '$op' $at\n" . $hereptr);
 					}
-					if ($op  eq '*' && $cc =~/\s*const\b/) {
+					if ($op eq '*' && $cc =~/\s*const\b/) {
 						# A unary '*' may be const
 
 					} elsif ($ctx =~ /.xW/) {
@@ -1595,11 +1669,33 @@ sub process {
 							$hereptr);
 					}
 
+				# A colon needs no spaces before when it is
+				# terminating a case value or a label.
+				} elsif ($opv eq ':C' || $opv eq ':L') {
+					if ($ctx =~ /Wx./) {
+						ERROR("space prohibited before that '$op' $at\n" . $hereptr);
+					}
+
 				# All the others need spaces both sides.
 				} elsif ($ctx !~ /[EWC]x[CWE]/) {
+					my $ok = 0;
+
 					# Ignore email addresses <foo@bar>
-					if (!($op eq '<' && $cb =~ /$;\S+\@\S+>/) &&
-					    !($op eq '>' && $cb =~ /<\S+\@\S+$;/)) {
+					if (($op eq '<' &&
+					     $cc =~ /^\S+\@\S+>/) ||
+					    ($op eq '>' &&
+					     $ca =~ /<\S+\@\S+$/))
+					{
+					    	$ok = 1;
+					}
+
+					# Ignore ?:
+					if (($opv eq ':O' && $ca =~ /\?$/) ||
+					    ($op eq '?' && $cc =~ /^:/)) {
+					    	$ok = 1;
+					}
+
+					if ($ok == 0) {
 						ERROR("spaces required around that '$op' $at\n" . $hereptr);
 					}
 				}
@@ -1670,6 +1766,7 @@ sub process {
 			my $value = $2;
 
 			# Flatten any parentheses and braces
+			$value =~ s/\)\(/\) \(/g;
 			while ($value =~ s/\([^\(\)]*\)/1/) {
 			}
 
@@ -1686,8 +1783,9 @@ sub process {
 			ERROR("space required before the open parenthesis '('\n" . $herecurr);
 		}
 
-# Check for illegal assignment in if conditional.
-		if ($line =~ /\bif\s*\(/) {
+# Check for illegal assignment in if conditional -- and check for trailing
+# statements after the conditional.
+		if ($line =~ /\b(?:if|while|for)\s*\(/ && $line !~ /^.\s*#/) {
 			my ($s, $c) = ($stat, $cond);
 
 			if ($c =~ /\bif\s*\(.*[^<>!=]=[^=].*/) {
@@ -1699,13 +1797,63 @@ sub process {
 			substr($s, 0, length($c), '');
 			$s =~ s/\n.*//g;
 			$s =~ s/$;//g; 	# Remove any comments
-			if (length($c) && $s !~ /^\s*({|;|)\s*\\*\s*$/ &&
-			    $c !~ /^.\s*\#\s*if/)
+			if (length($c) && $s !~ /^\s*{?\s*\\*\s*$/ &&
+			    $c !~ /}\s*while\s*/)
 			{
 				ERROR("trailing statements should be on next line\n" . $herecurr);
 			}
 		}
 
+# Check relative indent for conditionals and blocks.
+		if ($line =~ /\b(?:(?:if|while|for)\s*\(|do\b)/ && $line !~ /^.\s*#/ && $line !~ /\}\s*while\s*/) {
+			my ($s, $c) = ($stat, $cond);
+
+			substr($s, 0, length($c), '');
+
+			# Make sure we remove the line prefixes as we have
+			# none on the first line, and are going to readd them
+			# where necessary.
+			$s =~ s/\n./\n/gs;
+
+			# We want to check the first line inside the block
+			# starting at the end of the conditional, so remove:
+			#  1) any blank line termination
+			#  2) any opening brace { on end of the line
+			#  3) any do (...) {
+			my $continuation = 0;
+			my $check = 0;
+			$s =~ s/^.*\bdo\b//;
+			$s =~ s/^\s*{//;
+			if ($s =~ s/^\s*\\//) {
+				$continuation = 1;
+			}
+			if ($s =~ s/^\s*\n//) {
+				$check = 1;
+			}
+
+			# Also ignore a loop construct at the end of a
+			# preprocessor statement.
+			if (($prevline =~ /^.\s*#\s*define\s/ ||
+			    $prevline =~ /\\\s*$/) && $continuation == 0) {
+				$check = 0;
+			}
+
+			# Ignore the current line if its is a preprocessor
+			# line.
+			if ($s =~ /^\s*#\s*/) {
+				$check = 0;
+			}
+
+			my (undef, $sindent) = line_stats("+" . $s);
+
+			##print "line<$line> prevline<$prevline> indent<$indent> sindent<$sindent> check<$check> continuation<$continuation> s<$s>\n";
+
+			if ($check && (($sindent % 8) != 0 ||
+			    ($sindent <= $indent && $s ne ''))) {
+				WARN("suspect code indent for conditional statements\n" . $herecurr);
+			}
+		}
+
 # Check for bitwise tests written as boolean
 		if ($line =~ /
 			(?:
@@ -1777,7 +1925,8 @@ sub process {
 # multi-statement macros should be enclosed in a do while loop, grab the
 # first statement and ensure its the whole macro if its not enclosed
 # in a known good container
-		if ($line =~ /^.\s*\#\s*define\s*$Ident(\()?/) {
+		if ($realfile !~ m@/vmlinux.lds.h$@ &&
+		    $line =~ /^.\s*\#\s*define\s*$Ident(\()?/) {
 			my $ln = $linenr;
 			my $cnt = $realcnt;
 			my ($off, $dstat, $dcond, $rest);
@@ -1791,30 +1940,26 @@ sub process {
 				$lines[$ln - 1] =~ /^(?:-|..*\\$)/)
 			{
 				$ctx .= $rawlines[$ln - 1] . "\n";
+				$cnt-- if ($lines[$ln - 1] !~ /^-/);
 				$ln++;
-				$cnt--;
 			}
 			$ctx .= $rawlines[$ln - 1];
 
 			($dstat, $dcond, $ln, $cnt, $off) =
 				ctx_statement_block($linenr, $ln - $linenr + 1, 0);
 			#print "dstat<$dstat> dcond<$dcond> cnt<$cnt> off<$off>\n";
-			#print "LINE<$lines[$ln]> len<" . length($lines[$ln]) . "\n";
+			#print "LINE<$lines[$ln-1]> len<" . length($lines[$ln-1]) . "\n";
 
 			# Extract the remainder of the define (if any) and
 			# rip off surrounding spaces, and trailing \'s.
 			$rest = '';
-			if (defined $lines[$ln - 1] &&
-			    $off > length($lines[$ln - 1]))
-			{
-				$ln++;
-				$cnt--;
-				$off = 0;
-			}
-			while ($cnt > 0) {
-				$rest .= substr($lines[$ln - 1], $off) . "\n";
+			while ($off != 0 || ($cnt > 0 && $rest =~ /(?:^|\\)\s*$/)) {
+				#print "ADDING $off <" . substr($lines[$ln - 1], $off) . ">\n";
+				if ($off != 0 || $lines[$ln - 1] !~ /^-/) {
+					$rest .= substr($lines[$ln - 1], $off) . "\n";
+					$cnt--;
+				}
 				$ln++;
-				$cnt--;
 				$off = 0;
 			}
 			$rest =~ s/\\\n.//g;
@@ -1827,6 +1972,7 @@ sub process {
 			} else {
 				$dstat =~ s/^.\s*\#\s*define\s+$Ident\s*//;
 			}
+			$dstat =~ s/$;//g;
 			$dstat =~ s/\\\n.//g;
 			$dstat =~ s/^\s*//s;
 			$dstat =~ s/\s*$//s;
@@ -1845,6 +1991,7 @@ sub process {
 				DEFINE_PER_CPU|
 				__typeof__\(
 			}x;
+			#print "REST<$rest>\n";
 			if ($rest ne '') {
 				if ($rest !~ /while\s*\(/ &&
 				    $dstat !~ /$exceptions/)
@@ -2001,7 +2148,14 @@ sub process {
 		if ($prevline =~ /\bif\s*\(([^\)]*)\)/) {
 			my $expr = $1;
 			if ($line =~ /\bkfree\(\Q$expr\E\);/) {
-				WARN("kfree(NULL) is safe this check is probabally not required\n" . $hereprev);
+				WARN("kfree(NULL) is safe this check is probably not required\n" . $hereprev);
+			}
+		}
+# check for needless usb_free_urb() checks
+		if ($prevline =~ /\bif\s*\(([^\)]*)\)/) {
+			my $expr = $1;
+			if ($line =~ /\busb_free_urb\(\Q$expr\E\);/) {
+				WARN("usb_free_urb(NULL) is safe this check is probably not required\n" . $hereprev);
 			}
 		}
 
@@ -2106,6 +2260,10 @@ sub process {
 		if ($line =~ /\bsimple_(strto.*?)\s*\(/) {
 			WARN("consider using strict_$1 in preference to simple_$1\n" . $herecurr);
 		}
+# check for __initcall(), use device_initcall() explicitly please
+		if ($line =~ /^.\s*__initcall\s*\(/) {
+			WARN("please use device_initcall() instead of __initcall()\n" . $herecurr);
+		}
 
 # use of NR_CPUS is usually wrong
 # ignore definitions of NR_CPUS and usage to define arrays as likely right
diff --git a/v4l/scripts/make_kconfig.pl b/v4l/scripts/make_kconfig.pl
index b0dc16133..ee649f574 100755
--- a/v4l/scripts/make_kconfig.pl
+++ b/v4l/scripts/make_kconfig.pl
@@ -571,74 +571,6 @@ config VIDEO_KERNEL_VERSION
 
 	  Unless you know what you are doing, you should answer N.
 
-config PREVENT_FIRMWARE_BUILD
-	default n
-
-config FIRMWARE_IN_KERNEL
-	default y
-
-	bool "Include in-kernel firmware blobs in kernel binary"
-	depends on FW_LOADER
-	default y
-	help
-	  The kernel source tree includes a number of firmware 'blobs'
-	  which are used by various drivers. The recommended way to
-	  use these is to run "make firmware_install" and to copy the
-	  resulting binary files created in usr/lib/firmware directory
-	  of the kernel tree to the /lib/firmware on your system so
-	  that they can be loaded by userspace helpers on request.
-
-	  Enabling this option will build each required firmware blob
-	  into the kernel directly, where request_firmware() will find
-	  them without having to call out to userspace. This may be
-	  useful if your root file system requires a device which uses
-	  such firmware, and do not wish to use an initrd.
-
-	  This single option controls the inclusion of firmware for
-	  every driver which usees request_firmare() and ships its
-	  firmware in the kernel source tree, to avoid a proliferation
-	  of 'Include firmware for xxx device' options.
-
-	  Say 'N' and let firmware be loaded from userspace.
-
-config EXTRA_FIRMWARE
-	string "External firmware blobs to build into the kernel binary"
-	depends on FW_LOADER
-	help
-	  This option allows firmware to be built into the kernel, for the
-	  cases where the user either cannot or doesn't want to provide it from
-	  userspace at runtime (for example, when the firmware in question is
-	  required for accessing the boot device, and the user doesn't want to
-	  use an initrd).
-	  This option is a string, and takes the (space-separated) names of the
-	  firmware files -- the same names which appear in MODULE_FIRMWARE()
-	  and request_firmware() in the source. These files should exist under
-	  the directory specified by the EXTRA_FIRMWARE_DIR option, which is
-	  by default the firmware/ subdirectory of the kernel source tree.
-
-	  So, for example, you might set CONFIG_EXTRA_FIRMWARE="usb8388.bin",
-	  copy the usb8388.bin file into the firmware/ directory, and build the
-	  kernel. Then any request_firmware("usb8388.bin") will be
-	  satisfied internally without needing to call out to userspace.
-
-	  WARNING: If you include additional firmware files into your binary
-	  kernel image which are not available under the terms of the GPL,
-	  then it may be a violation of the GPL to distribute the resulting
-	  image -- since it combines both GPL and non-GPL work. You should
-	  consult a lawyer of your own before distributing such an image.
-
-config EXTRA_FIRMWARE_DIR
-	string "Firmware blobs root directory"
-	depends on EXTRA_FIRMWARE != ""
-	default "firmware"
-	help
-	  This option controls the directory in which the kernel build system
-	  looks for the firmware files listed in the EXTRA_FIRMWARE option.
-	  The default is the firmware/ directory in the kernel source tree,
-	  but by changing this option you can point it elsewhere, such as
-	  the /lib/firmware/ directory or another separate directory
-	  containing firmware files.
-
 EOF
 
 open_kconfig('../linux', '../linux/drivers/media/Kconfig');
diff --git a/v4l/versions.txt b/v4l/versions.txt
index acdee0ec1..d3efd816a 100644
--- a/v4l/versions.txt
+++ b/v4l/versions.txt
@@ -1,6 +1,10 @@
 # Use this for stuff for drivers that don't compile
 [2.6.99]
 
+[2.6.26]
+# Needs camera.h
+VIDEO_PXA27x
+
 [2.6.25]
 # Requires gpiolib
 SOC_CAMERA