merge: http://www.linuxtv.org/hg/~hverkuil/v4l-dvb-rds

From: Mauro Carvalho Chehab <mchehab@redhat.com>

Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

19 files changed, 440 insertions, 296 deletions

diff --git a/linux/Documentation/video4linux/CARDLIST.cx23885 b/linux/Documentation/video4linux/CARDLIST.cx23885
index 19feb514f..525edb37c 100644
--- a/linux/Documentation/video4linux/CARDLIST.cx23885
+++ b/linux/Documentation/video4linux/CARDLIST.cx23885
@@ -22,3 +22,4 @@
  21 -> Hauppauge WinTV-HVR1210                             [0070:2291,0070:2295]
  22 -> Mygica X8506 DMB-TH                                 [14f1:8651]
  23 -> Magic-Pro ProHDTV Extreme 2                         [14f1:8657]
+ 24 -> Hauppauge WinTV-HVR1850                             [0070:8541]
diff --git a/linux/drivers/media/dvb/b2c2/flexcop-fe-tuner.c b/linux/drivers/media/dvb/b2c2/flexcop-fe-tuner.c
index bc370183e..301bf1688 100644
--- a/linux/drivers/media/dvb/b2c2/flexcop-fe-tuner.c
+++ b/linux/drivers/media/dvb/b2c2/flexcop-fe-tuner.c
@@ -20,8 +20,14 @@
 #include "tuner-simple.h"
 #include "stv0297.h"
 
+
+/* Can we use the specified front-end?  Remember that if we are compiled
+ * into the kernel we can't call code that's in modules.  */
+#define FE_SUPPORTED(fe) (defined(CONFIG_DVB_##fe) || \
+	(defined(CONFIG_DVB_##fe##_MODULE) && defined(MODULE)))
+
 /* lnb control */
-#if defined(CONFIG_DVB_MT312_MODULE) || defined(CONFIG_DVB_STV0299_MODULE)
+#if FE_SUPPORTED(MT312) || FE_SUPPORTED(STV0299)
 static int flexcop_set_voltage(struct dvb_frontend *fe, fe_sec_voltage_t voltage)
 {
 	struct flexcop_device *fc = fe->dvb->priv;
@@ -49,8 +55,7 @@ static int flexcop_set_voltage(struct dvb_frontend *fe, fe_sec_voltage_t voltage
 }
 #endif
 
-#if defined(CONFIG_DVB_S5H1420_MODULE) || defined(CONFIG_DVB_STV0299_MODULE) \
-	|| defined(CONFIG_DVB_MT312_MODULE)
+#if FE_SUPPORTED(S5H1420) || FE_SUPPORTED(STV0299) || FE_SUPPORTED(MT312)
 static int flexcop_sleep(struct dvb_frontend* fe)
 {
 	struct flexcop_device *fc = fe->dvb->priv;
@@ -61,7 +66,7 @@ static int flexcop_sleep(struct dvb_frontend* fe)
 #endif
 
 /* SkyStar2 DVB-S rev 2.3 */
-#if defined(CONFIG_DVB_MT312_MODULE)
+#if FE_SUPPORTED(MT312) && FE_SUPPORTED(PLL)
 static int flexcop_set_tone(struct dvb_frontend *fe, fe_sec_tone_mode_t tone)
 {
 /* u16 wz_half_period_for_45_mhz[] = { 0x01ff, 0x0154, 0x00ff, 0x00cc }; */
@@ -150,53 +155,34 @@ static struct mt312_config skystar23_samsung_tbdu18132_config = {
 	.demod_address = 0x0e,
 };
 
-static int skystar23_samsung_tbdu18132_tuner_set_params(struct dvb_frontend *fe,
-	struct dvb_frontend_parameters *params)
-{
-	u8 buf[4];
-	u32 div;
-	struct i2c_msg msg = { .addr = 0x61, .flags = 0, .buf = buf,
-	.len = sizeof(buf) };
-	struct flexcop_device *fc = fe->dvb->priv;
-	div = (params->frequency + (125/2)) / 125;
-
-	buf[0] = (div >> 8) & 0x7f;
-	buf[1] = (div >> 0) & 0xff;
-	buf[2] = 0x84 | ((div >> 10) & 0x60);
-	buf[3] = 0x80;
-
-	if (params->frequency < 1550000)
-		buf[3] |= 0x02;
-
-	if (fe->ops.i2c_gate_ctrl)
-		fe->ops.i2c_gate_ctrl(fe, 1);
-	if (i2c_transfer(&fc->fc_i2c_adap[0].i2c_adap, &msg, 1) != 1)
-		return -EIO;
-	return 0;
-}
-
 static int skystar2_rev23_attach(struct flexcop_device *fc,
 	struct i2c_adapter *i2c)
 {
+	struct dvb_frontend_ops *ops;
+
 	fc->fe = dvb_attach(mt312_attach, &skystar23_samsung_tbdu18132_config, i2c);
-	if (fc->fe != NULL) {
-		struct dvb_frontend_ops *ops = &fc->fe->ops;
-		ops->tuner_ops.set_params   =
-			skystar23_samsung_tbdu18132_tuner_set_params;
-		ops->diseqc_send_master_cmd = flexcop_diseqc_send_master_cmd;
-		ops->diseqc_send_burst      = flexcop_diseqc_send_burst;
-		ops->set_tone               = flexcop_set_tone;
-		ops->set_voltage            = flexcop_set_voltage;
-		fc->fe_sleep                = ops->sleep;
-		ops->sleep                  = flexcop_sleep;
-		return 1;
-	}
-	return 0;
+	if (!fc->fe)
+		return 0;
+
+	if (!dvb_attach(dvb_pll_attach, fc->fe, 0x61, i2c,
+			DVB_PLL_SAMSUNG_TBDU18132))
+		return 0;
+
+	ops = &fc->fe->ops;
+	ops->diseqc_send_master_cmd = flexcop_diseqc_send_master_cmd;
+	ops->diseqc_send_burst      = flexcop_diseqc_send_burst;
+	ops->set_tone               = flexcop_set_tone;
+	ops->set_voltage            = flexcop_set_voltage;
+	fc->fe_sleep                = ops->sleep;
+	ops->sleep                  = flexcop_sleep;
+	return 1;
 }
+#else
+#define skystar2_rev23_attach NULL
 #endif
 
 /* SkyStar2 DVB-S rev 2.6 */
-#if defined(CONFIG_DVB_STV0299_MODULE)
+#if FE_SUPPORTED(STV0299) && FE_SUPPORTED(PLL)
 static int samsung_tbmu24112_set_symbol_rate(struct dvb_frontend *fe,
 	u32 srate, u32 ratio)
 {
@@ -225,31 +211,6 @@ static int samsung_tbmu24112_set_symbol_rate(struct dvb_frontend *fe,
 	return 0;
 }
 
-static int samsung_tbmu24112_tuner_set_params(struct dvb_frontend *fe,
-	struct dvb_frontend_parameters *params)
-{
-	u8 buf[4];
-	u32 div;
-	struct i2c_msg msg = {
-	.addr = 0x61, .flags = 0, .buf = buf, .len = sizeof(buf) };
-	struct flexcop_device *fc = fe->dvb->priv;
-	div = params->frequency / 125;
-
-	buf[0] = (div >> 8) & 0x7f;
-	buf[1] = div & 0xff;
-	buf[2] = 0x84; /* 0xC4 */
-	buf[3] = 0x08;
-
-	if (params->frequency < 1500000)
-		buf[3] |= 0x10;
-
-	if (fe->ops.i2c_gate_ctrl)
-		fe->ops.i2c_gate_ctrl(fe, 1);
-	if (i2c_transfer(&fc->fc_i2c_adap[0].i2c_adap, &msg, 1) != 1)
-		return -EIO;
-	return 0;
-}
-
 static u8 samsung_tbmu24112_inittab[] = {
 	0x01, 0x15,
 	0x02, 0x30,
@@ -311,20 +272,25 @@ static int skystar2_rev26_attach(struct flexcop_device *fc,
 	struct i2c_adapter *i2c)
 {
 	fc->fe = dvb_attach(stv0299_attach, &samsung_tbmu24112_config, i2c);
-	if (fc->fe != NULL) {
-		struct dvb_frontend_ops *ops  = &fc->fe->ops;
-		ops->tuner_ops.set_params = samsung_tbmu24112_tuner_set_params;
-		ops->set_voltage = flexcop_set_voltage;
-		fc->fe_sleep = ops->sleep;
-		ops->sleep = flexcop_sleep;
-		return 1;
-	}
-	return 0;
+	if (!fc->fe)
+		return 0;
+
+	if (!dvb_attach(dvb_pll_attach, fc->fe, 0x61, i2c,
+			DVB_PLL_SAMSUNG_TBMU24112))
+		return 0;
+
+	fc->fe->ops.set_voltage = flexcop_set_voltage;
+	fc->fe_sleep = fc->fe->ops.sleep;
+	fc->fe->ops.sleep = flexcop_sleep;
+	return 1;
+
 }
+#else
+#define skystar2_rev26_attach NULL
 #endif
 
 /* SkyStar2 DVB-S rev 2.7 */
-#if defined(CONFIG_DVB_S5H1420_MODULE)
+#if FE_SUPPORTED(S5H1420) && FE_SUPPORTED(ISL6421) && FE_SUPPORTED(TUNER_ITD1000)
 static struct s5h1420_config skystar2_rev2_7_s5h1420_config = {
 	.demod_address = 0x53,
 	.invert = 1,
@@ -385,10 +351,12 @@ fail:
 	fc->fc_i2c_adap[0].no_base_addr = 0;
 	return 0;
 }
+#else
+#define skystar2_rev27_attach NULL
 #endif
 
 /* SkyStar2 rev 2.8 */
-#if defined(CONFIG_DVB_CX24123_MODULE)
+#if FE_SUPPORTED(CX24123) && FE_SUPPORTED(ISL6421) && FE_SUPPORTED(TUNER_CX24113)
 static struct cx24123_config skystar2_rev2_8_cx24123_config = {
 	.demod_address = 0x55,
 	.dont_use_pll = 1,
@@ -433,10 +401,12 @@ static int skystar2_rev28_attach(struct flexcop_device *fc,
 	 * IR-receiver (PIC16F818) - but the card has no input for that ??? */
 	return 1;
 }
+#else
+#define skystar2_rev28_attach NULL
 #endif
 
 /* AirStar DVB-T */
-#if defined(CONFIG_DVB_MT352_MODULE)
+#if FE_SUPPORTED(MT352) && FE_SUPPORTED(PLL)
 static int samsung_tdtc9251dh0_demod_init(struct dvb_frontend *fe)
 {
 	static u8 mt352_clock_config[] = { 0x89, 0x18, 0x2d };
@@ -454,32 +424,6 @@ static int samsung_tdtc9251dh0_demod_init(struct dvb_frontend *fe)
 	return 0;
 }
 
-static int samsung_tdtc9251dh0_calc_regs(struct dvb_frontend *fe,
-	struct dvb_frontend_parameters *params, u8* pllbuf, int buf_len)
-{
-	u32 div;
-	unsigned char bs = 0;
-
-	if (buf_len < 5)
-		return -EINVAL;
-
-#define IF_FREQUENCYx6 217    /* 6 * 36.16666666667MHz */
-	div = (((params->frequency + 83333) * 3) / 500000) + IF_FREQUENCYx6;
-	if (params->frequency >= 48000000 && params->frequency <= 154000000) \
-		bs = 0x09;
-	if (params->frequency >= 161000000 && params->frequency <= 439000000) \
-		bs = 0x0a;
-	if (params->frequency >= 447000000 && params->frequency <= 863000000) \
-		bs = 0x08;
-
-	pllbuf[0] = 0x61;
-	pllbuf[1] = div >> 8;
-	pllbuf[2] = div & 0xff;
-	pllbuf[3] = 0xcc;
-	pllbuf[4] = bs;
-	return 5;
-}
-
 static struct mt352_config samsung_tdtc9251dh0_config = {
 	.demod_address = 0x0f,
 	.demod_init    = samsung_tdtc9251dh0_demod_init,
@@ -489,16 +433,18 @@ static int airstar_dvbt_attach(struct flexcop_device *fc,
 	struct i2c_adapter *i2c)
 {
 	fc->fe = dvb_attach(mt352_attach, &samsung_tdtc9251dh0_config, i2c);
-	if (fc->fe != NULL) {
-		fc->fe->ops.tuner_ops.calc_regs = samsung_tdtc9251dh0_calc_regs;
-		return 1;
-	}
-	return 0;
+	if (!fc->fe)
+		return 0;
+
+	return !!dvb_attach(dvb_pll_attach, fc->fe, 0x61, NULL,
+			    DVB_PLL_SAMSUNG_TDTC9251DH0);
 }
+#else
+#define airstar_dvbt_attach NULL
 #endif
 
 /* AirStar ATSC 1st generation */
-#if defined(CONFIG_DVB_BCM3510_MODULE)
+#if FE_SUPPORTED(BCM3510)
 static int flexcop_fe_request_firmware(struct dvb_frontend *fe,
 	const struct firmware **fw, char* name)
 {
@@ -517,10 +463,12 @@ static int airstar_atsc1_attach(struct flexcop_device *fc,
 	fc->fe = dvb_attach(bcm3510_attach, &air2pc_atsc_first_gen_config, i2c);
 	return fc->fe != NULL;
 }
+#else
+#define airstar_atsc1_attach NULL
 #endif
 
 /* AirStar ATSC 2nd generation */
-#if defined(CONFIG_DVB_NXT200X_MODULE)
+#if FE_SUPPORTED(NXT200X) && FE_SUPPORTED(PLL)
 static struct nxt200x_config samsung_tbmv_config = {
 	.demod_address = 0x0a,
 };
@@ -535,10 +483,12 @@ static int airstar_atsc2_attach(struct flexcop_device *fc,
 	return !!dvb_attach(dvb_pll_attach, fc->fe, 0x61, NULL,
 			    DVB_PLL_SAMSUNG_TBMV);
 }
+#else
+#define airstar_atsc2_attach NULL
 #endif
 
 /* AirStar ATSC 3rd generation */
-#if defined(CONFIG_DVB_LGDT330X_MODULE)
+#if FE_SUPPORTED(LGDT330X)
 static struct lgdt330x_config air2pc_atsc_hd5000_config = {
 	.demod_address       = 0x59,
 	.demod_chip          = LGDT3303,
@@ -556,57 +506,12 @@ static int airstar_atsc3_attach(struct flexcop_device *fc,
 	return !!dvb_attach(simple_tuner_attach, fc->fe, i2c, 0x61,
 			    TUNER_LG_TDVS_H06XF);
 }
+#else
+#define airstar_atsc3_attach NULL
 #endif
 
 /* CableStar2 DVB-C */
-#if defined(CONFIG_DVB_STV0297_MODULE)
-static int alps_tdee4_stv0297_tuner_set_params(struct dvb_frontend* fe,
-		struct dvb_frontend_parameters *fep)
-{
-	struct flexcop_device *fc = fe->dvb->priv;
-	u8 buf[4];
-	u16 div;
-	int ret;
-
-/* 62.5 kHz * 10 */
-#define REF_FREQ    625
-#define FREQ_OFFSET 36125
-
-	div = ((fep->frequency/1000 + FREQ_OFFSET) * 10) / REF_FREQ;
-/* 4 MHz = 4000 KHz */
-
-	buf[0] = (u8)( div >> 8) & 0x7f;
-	buf[1] = (u8)        div & 0xff;
-
-/* F(osc) = N * Reference Freq. (62.5 kHz)
- * byte 2 :  0 N14 N13 N12 N11 N10 N9  N8
- * byte 3 : N7 N6  N5  N4  N3  N2  N1  N0
- * byte 4 : 1  *   *   AGD R3  R2  R1  R0
- * byte 5 : C1 *   RE  RTS BS4 BS3 BS2 BS1
- * AGD = 1, R3 R2 R1 R0 = 0 1 0 1 => byte 4 = 1**10101 = 0x95 */
-	buf[2] = 0x95;
-
-/* Range(MHz)  C1 *  RE RTS BS4 BS3 BS2 BS1  Byte 5
- *  47 - 153   0  *  0   0   0   0   0   1   0x01
- * 153 - 430   0  *  0   0   0   0   1   0   0x02
- * 430 - 822   0  *  0   0   1   0   0   0   0x08
- * 822 - 862   1  *  0   0   1   0   0   0   0x88 */
-
-	     if (fep->frequency <= 153000000) buf[3] = 0x01;
-	else if (fep->frequency <= 430000000) buf[3] = 0x02;
-	else if (fep->frequency <= 822000000) buf[3] = 0x08;
-	else buf[3] = 0x88;
-
-	if (fe->ops.i2c_gate_ctrl)
-		fe->ops.i2c_gate_ctrl(fe, 0);
-	deb_tuner("tuner buffer for %d Hz: %x %x %x %x\n", fep->frequency,
-	buf[0], buf[1], buf[2], buf[3]);
-	ret = fc->i2c_request(&fc->fc_i2c_adap[2],
-			FC_WRITE, 0x61, buf[0], &buf[1], 3);
-	deb_tuner("tuner write returned: %d\n",ret);
-	return ret;
-}
-
+#if FE_SUPPORTED(STV0297) && FE_SUPPORTED(PLL)
 static u8 alps_tdee4_stv0297_inittab[] = {
 	0x80, 0x01,
 	0x80, 0x00,
@@ -690,47 +595,43 @@ static int cablestar2_attach(struct flexcop_device *fc,
 {
 	fc->fc_i2c_adap[0].no_base_addr = 1;
 	fc->fe = dvb_attach(stv0297_attach, &alps_tdee4_stv0297_config, i2c);
-	if (!fc->fe) {
-		/* Reset for next frontend to try */
-		fc->fc_i2c_adap[0].no_base_addr = 0;
-		return 0;
-	}
-	fc->fe->ops.tuner_ops.set_params = alps_tdee4_stv0297_tuner_set_params;
+	if (!fc->fe)
+		goto fail;
+
+	/* This tuner doesn't use the stv0297's I2C gate, but instead the
+	 * tuner is connected to a different flexcop I2C adapter.  */
+	if (fc->fe->ops.i2c_gate_ctrl)
+		fc->fe->ops.i2c_gate_ctrl(fc->fe, 0);
+	fc->fe->ops.i2c_gate_ctrl = NULL;
+
+	if (!dvb_attach(dvb_pll_attach, fc->fe, 0x61,
+			fc->fc_i2c_adap[2].i2c_adap, DVB_PLL_TDEE4))
+		goto fail;
+
 	return 1;
+
+fail:
+	/* Reset for next frontend to try */
+	fc->fc_i2c_adap[0].no_base_addr = 0;
+	return 0;
 }
+#else
+#define cablestar2_attach NULL
 #endif
 
 static struct {
 	flexcop_device_type_t type;
 	int (*attach)(struct flexcop_device *, struct i2c_adapter *);
 } flexcop_frontends[] = {
-#if defined(CONFIG_DVB_S5H1420_MODULE)
 	{ FC_SKY_REV27, skystar2_rev27_attach },
-#endif
-#if defined(CONFIG_DVB_CX24123_MODULE)
 	{ FC_SKY_REV28, skystar2_rev28_attach },
-#endif
-#if defined(CONFIG_DVB_STV0299_MODULE)
 	{ FC_SKY_REV26, skystar2_rev26_attach },
-#endif
-#if defined(CONFIG_DVB_MT352_MODULE)
 	{ FC_AIR_DVBT, airstar_dvbt_attach },
-#endif
-#if defined(CONFIG_DVB_NXT200X_MODULE)
 	{ FC_AIR_ATSC2, airstar_atsc2_attach },
-#endif
-#if defined(CONFIG_DVB_LGDT330X_MODULE)
 	{ FC_AIR_ATSC3, airstar_atsc3_attach },
-#endif
-#if defined(CONFIG_DVB_BCM3510_MODULE)
 	{ FC_AIR_ATSC1, airstar_atsc1_attach },
-#endif
-#if defined(CONFIG_DVB_STV0297_MODULE)
 	{ FC_CABLE, cablestar2_attach },
-#endif
-#if defined(CONFIG_DVB_MT312_MODULE)
 	{ FC_SKY_REV23, skystar2_rev23_attach },
-#endif
 };
 
 /* try to figure out the frontend */
@@ -738,6 +639,8 @@ int flexcop_frontend_init(struct flexcop_device *fc)
 {
 	int i;
 	for (i = 0; i < ARRAY_SIZE(flexcop_frontends); i++) {
+		if (!flexcop_frontends[i].attach)
+			continue;
 		/* type needs to be set before, because of some workarounds
 		 * done based on the probed card type */
 		fc->dev_type = flexcop_frontends[i].type;
diff --git a/linux/drivers/media/dvb/frontends/dvb-pll.c b/linux/drivers/media/dvb/frontends/dvb-pll.c
index 8ef5d1eff..d8a7947e0 100644
--- a/linux/drivers/media/dvb/frontends/dvb-pll.c
+++ b/linux/drivers/media/dvb/frontends/dvb-pll.c
@@ -390,6 +390,77 @@ static struct dvb_pll_desc dvb_pll_samsung_dtos403ih102a = {
 	}
 };
 
+/* Samsung TDTC9251DH0 DVB-T NIM, as used on AirStar 2 */
+static struct dvb_pll_desc dvb_pll_samsung_tdtc9251dh0 = {
+	.name	= "Samsung TDTC9251DH0",
+	.min	=  48000000,
+	.max	= 863000000,
+	.iffreq	=  36166667,
+	.count	= 3,
+	.entries = {
+		{ 157500000, 166667, 0xcc, 0x09 },
+		{ 443000000, 166667, 0xcc, 0x0a },
+		{ 863000000, 166667, 0xcc, 0x08 },
+	}
+};
+
+/* Samsung TBDU18132 DVB-S NIM with TSA5059 PLL, used in SkyStar2 DVB-S 2.3 */
+static struct dvb_pll_desc dvb_pll_samsung_tbdu18132 = {
+	.name = "Samsung TBDU18132",
+	.min	=  950000,
+	.max	= 2150000, /* guesses */
+	.iffreq = 0,
+	.count = 2,
+	.entries = {
+		{ 1550000, 125, 0x84, 0x82 },
+		{ 4095937, 125, 0x84, 0x80 },
+	}
+	/* TSA5059 PLL has a 17 bit divisor rather than the 15 bits supported
+	 * by this driver.  The two extra bits are 0x60 in the third byte.  15
+	 * bits is enough for over 4 GHz, which is enough to cover the range
+	 * of this tuner.  We could use the additional divisor bits by adding
+	 * more entries, e.g.
+	 { 0x0ffff * 125 + 125/2, 125, 0x84 | 0x20, },
+	 { 0x17fff * 125 + 125/2, 125, 0x84 | 0x40, },
+	 { 0x1ffff * 125 + 125/2, 125, 0x84 | 0x60, }, */
+};
+
+/* Samsung TBMU24112 DVB-S NIM with SL1935 zero-IF tuner */
+static struct dvb_pll_desc dvb_pll_samsung_tbmu24112 = {
+	.name = "Samsung TBMU24112",
+	.min	=  950000,
+	.max	= 2150000, /* guesses */
+	.iffreq = 0,
+	.count = 2,
+	.entries = {
+		{ 1500000, 125, 0x84, 0x18 },
+		{ 9999999, 125, 0x84, 0x08 },
+	}
+};
+
+/* Alps TDEE4 DVB-C NIM, used on Cablestar 2 */
+/* byte 4 : 1  *   *   AGD R3  R2  R1  R0
+ * byte 5 : C1 *   RE  RTS BS4 BS3 BS2 BS1
+ * AGD = 1, R3 R2 R1 R0 = 0 1 0 1 => byte 4 = 1**10101 = 0x95
+ * Range(MHz)  C1 *  RE RTS BS4 BS3 BS2 BS1  Byte 5
+ *  47 - 153   0  *  0   0   0   0   0   1   0x01
+ * 153 - 430   0  *  0   0   0   0   1   0   0x02
+ * 430 - 822   0  *  0   0   1   0   0   0   0x08
+ * 822 - 862   1  *  0   0   1   0   0   0   0x88 */
+static struct dvb_pll_desc dvb_pll_alps_tdee4 = {
+	.name = "ALPS TDEE4",
+	.min	=  47000000,
+	.max	= 862000000,
+	.iffreq	=  36125000,
+	.count = 4,
+	.entries = {
+		{ 153000000, 62500, 0x95, 0x01 },
+		{ 430000000, 62500, 0x95, 0x02 },
+		{ 822000000, 62500, 0x95, 0x08 },
+		{ 999999999, 62500, 0x95, 0x88 },
+	}
+};
+
 /* ----------------------------------------------------------- */
 
 static struct dvb_pll_desc *pll_list[] = {
@@ -403,11 +474,15 @@ static struct dvb_pll_desc *pll_list[] = {
 	[DVB_PLL_TUA6034]                = &dvb_pll_tua6034,
 	[DVB_PLL_TDA665X]                = &dvb_pll_tda665x,
 	[DVB_PLL_TDED4]                  = &dvb_pll_tded4,
+	[DVB_PLL_TDEE4]                  = &dvb_pll_alps_tdee4,
 	[DVB_PLL_TDHU2]                  = &dvb_pll_tdhu2,
 	[DVB_PLL_SAMSUNG_TBMV]           = &dvb_pll_samsung_tbmv,
 	[DVB_PLL_PHILIPS_SD1878_TDA8261] = &dvb_pll_philips_sd1878_tda8261,
 	[DVB_PLL_OPERA1]                 = &dvb_pll_opera1,
 	[DVB_PLL_SAMSUNG_DTOS403IH102A]  = &dvb_pll_samsung_dtos403ih102a,
+	[DVB_PLL_SAMSUNG_TDTC9251DH0]    = &dvb_pll_samsung_tdtc9251dh0,
+	[DVB_PLL_SAMSUNG_TBDU18132]	 = &dvb_pll_samsung_tbdu18132,
+	[DVB_PLL_SAMSUNG_TBMU24112]      = &dvb_pll_samsung_tbmu24112,
 };
 
 /* ----------------------------------------------------------- */
diff --git a/linux/drivers/media/dvb/frontends/dvb-pll.h b/linux/drivers/media/dvb/frontends/dvb-pll.h
index 05239f579..086964344 100644
--- a/linux/drivers/media/dvb/frontends/dvb-pll.h
+++ b/linux/drivers/media/dvb/frontends/dvb-pll.h
@@ -23,6 +23,10 @@
 #define DVB_PLL_PHILIPS_SD1878_TDA8261 12
 #define DVB_PLL_OPERA1                 13
 #define DVB_PLL_SAMSUNG_DTOS403IH102A  14
+#define DVB_PLL_SAMSUNG_TDTC9251DH0    15
+#define DVB_PLL_SAMSUNG_TBDU18132      16
+#define DVB_PLL_SAMSUNG_TBMU24112      17
+#define DVB_PLL_TDEE4		       18
 
 /**
  * Attach a dvb-pll to the supplied frontend structure.
diff --git a/linux/drivers/media/dvb/frontends/mt312.c b/linux/drivers/media/dvb/frontends/mt312.c
index 071328d7b..f348f8bea 100644
--- a/linux/drivers/media/dvb/frontends/mt312.c
+++ b/linux/drivers/media/dvb/frontends/mt312.c
@@ -35,6 +35,7 @@
 #include "dvb_frontend.h"
 #include "mt312_priv.h"
 #include "mt312.h"
+#include "compat.h"
 
 
 struct mt312_state {
diff --git a/linux/drivers/media/dvb/frontends/stv0900_core.c b/linux/drivers/media/dvb/frontends/stv0900_core.c
index 84bf35edb..5dbcf215f 100644
--- a/linux/drivers/media/dvb/frontends/stv0900_core.c
+++ b/linux/drivers/media/dvb/frontends/stv0900_core.c
@@ -234,8 +234,8 @@ enum fe_stv0900_error stv0900_initialize(struct stv0900_internal *i_params)
 #endif
 			stv0900_write_reg(i_params, R0900_P1_TNRCFG, 0x6c);
 			stv0900_write_reg(i_params, R0900_P2_TNRCFG, 0x6f);
-			stv0900_write_reg(i_params, R0900_P1_I2CRPT, 0x24);
-			stv0900_write_reg(i_params, R0900_P2_I2CRPT, 0x24);
+			stv0900_write_reg(i_params, R0900_P1_I2CRPT, 0x20);
+			stv0900_write_reg(i_params, R0900_P2_I2CRPT, 0x20);
 			stv0900_write_reg(i_params, R0900_NCOARSE, 0x13);
 			msleep(3);
 			stv0900_write_reg(i_params, R0900_I2CCFG, 0x08);
@@ -374,8 +374,8 @@ static int stv0900_i2c_gate_ctrl(struct dvb_frontend *fe, int enable)
 	u32 fi2c;
 
 	dmd_reg(fi2c, F0900_P1_I2CT_ON, F0900_P2_I2CT_ON);
-	if (enable)
-		stv0900_write_bits(i_params, fi2c, 1);
+
+	stv0900_write_bits(i_params, fi2c, enable);
 
 	return 0;
 }
diff --git a/linux/drivers/media/dvb/frontends/stv6110.c b/linux/drivers/media/dvb/frontends/stv6110.c
index 70efac869..dcf1b21ea 100644
--- a/linux/drivers/media/dvb/frontends/stv6110.c
+++ b/linux/drivers/media/dvb/frontends/stv6110.c
@@ -36,6 +36,7 @@ struct stv6110_priv {
 	struct i2c_adapter *i2c;
 
 	u32 mclk;
+	u8 clk_div;
 	u8 regs[8];
 };
 
@@ -100,35 +101,25 @@ static int stv6110_read_regs(struct dvb_frontend *fe, u8 regs[],
 	struct stv6110_priv *priv = fe->tuner_priv;
 	int rc;
 	u8 reg[] = { start };
-	struct i2c_msg msg_wr = {
-		.addr	= priv->i2c_address,
-		.flags	= 0,
-		.buf	= reg,
-		.len	= 1,
+	struct i2c_msg msg[] = {
+		{
+			.addr	= priv->i2c_address,
+			.flags	= 0,
+			.buf	= reg,
+			.len	= 1,
+		}, {
+			.addr	= priv->i2c_address,
+			.flags	= I2C_M_RD,
+			.buf	= regs,
+			.len	= len,
+		},
 	};
 
-	struct i2c_msg msg_rd = {
-		.addr	= priv->i2c_address,
-		.flags	= I2C_M_RD,
-		.buf	= regs,
-		.len	= len,
-	};
-	/* write subaddr */
 	if (fe->ops.i2c_gate_ctrl)
 		fe->ops.i2c_gate_ctrl(fe, 1);
 
-	rc = i2c_transfer(priv->i2c, &msg_wr, 1);
-	if (rc != 1)
-		dprintk("%s: i2c error\n", __func__);
-
-	if (fe->ops.i2c_gate_ctrl)
-		fe->ops.i2c_gate_ctrl(fe, 0);
-	/* read registers */
-	if (fe->ops.i2c_gate_ctrl)
-		fe->ops.i2c_gate_ctrl(fe, 1);
-
-	rc = i2c_transfer(priv->i2c, &msg_rd, 1);
-	if (rc != 1)
+	rc = i2c_transfer(priv->i2c, msg, 2);
+	if (rc != 2)
 		dprintk("%s: i2c error\n", __func__);
 
 	if (fe->ops.i2c_gate_ctrl)
@@ -221,6 +212,10 @@ static int stv6110_init(struct dvb_frontend *fe)
 	priv->regs[RSTV6110_CTRL1] |=
 				((((priv->mclk / 1000000) - 16) & 0x1f) << 3);
 
+	/* divisor value for the output clock */
+	priv->regs[RSTV6110_CTRL2] &= ~0xc0;
+	priv->regs[RSTV6110_CTRL2] |= (priv->clk_div << 6);
+
 	stv6110_write_regs(fe, &priv->regs[RSTV6110_CTRL1], RSTV6110_CTRL1, 8);
 	msleep(1);
 	stv6110_set_bandwidth(fe, 72000000);
@@ -418,6 +413,10 @@ struct dvb_frontend *stv6110_attach(struct dvb_frontend *fe,
 	};
 	int ret;
 
+	/* divisor value for the output clock */
+	reg0[2] &= ~0xc0;
+	reg0[2] |= (config->clk_div << 6);
+
 	if (fe->ops.i2c_gate_ctrl)
 		fe->ops.i2c_gate_ctrl(fe, 1);
 
@@ -436,6 +435,7 @@ struct dvb_frontend *stv6110_attach(struct dvb_frontend *fe,
 	priv->i2c_address = config->i2c_address;
 	priv->i2c = i2c;
 	priv->mclk = config->mclk;
+	priv->clk_div = config->clk_div;
 
 	memcpy(&priv->regs, &reg0[1], 8);
 
diff --git a/linux/drivers/media/dvb/frontends/stv6110.h b/linux/drivers/media/dvb/frontends/stv6110.h
index 1c0314d6a..9db240241 100644
--- a/linux/drivers/media/dvb/frontends/stv6110.h
+++ b/linux/drivers/media/dvb/frontends/stv6110.h
@@ -41,7 +41,7 @@
 struct stv6110_config {
 	u8 i2c_address;
 	u32 mclk;
-	int iq_wiring;
+	u8 clk_div;	/* divisor value for the output clock */
 };
 
 #if defined(CONFIG_DVB_STV6110) || (defined(CONFIG_DVB_STV6110_MODULE) \
diff --git a/linux/drivers/media/video/bt8xx/bttv-cards.c b/linux/drivers/media/video/bt8xx/bttv-cards.c
index 38b238f0f..fdca5f67c 100644
--- a/linux/drivers/media/video/bt8xx/bttv-cards.c
+++ b/linux/drivers/media/video/bt8xx/bttv-cards.c
@@ -3362,8 +3362,6 @@ void __devinit bttv_init_card1(struct bttv *btv)
 /* initialization part two -- after registering i2c bus */
 void __devinit bttv_init_card2(struct bttv *btv)
 {
-	int addr=ADDR_UNSET;
-
 	btv->tuner_type = UNSET;
 
 	if (BTTV_BOARD_UNKNOWN == btv->c.type) {
@@ -3508,9 +3506,6 @@ void __devinit bttv_init_card2(struct bttv *btv)
 	btv->pll.pll_current = -1;
 
 	/* tuner configuration (from card list / autodetect / insmod option) */
-	if (ADDR_UNSET != bttv_tvcards[btv->c.type].tuner_addr)
-		addr = bttv_tvcards[btv->c.type].tuner_addr;
-
 	if (UNSET != bttv_tvcards[btv->c.type].tuner_type)
 		if (UNSET == btv->tuner_type)
 			btv->tuner_type = bttv_tvcards[btv->c.type].tuner_type;
@@ -3534,40 +3529,6 @@ void __devinit bttv_init_card2(struct bttv *btv)
 	if (UNSET == btv->tuner_type)
 		btv->tuner_type = TUNER_ABSENT;
 
-	if (btv->tuner_type != TUNER_ABSENT) {
-		struct tuner_setup tun_setup;
-
-		/* Load tuner module before issuing tuner config call! */
-		if (bttv_tvcards[btv->c.type].has_radio)
-			v4l2_i2c_new_probed_subdev(&btv->c.v4l2_dev,
-				&btv->c.i2c_adap, "tuner", "tuner",
-				v4l2_i2c_tuner_addrs(ADDRS_RADIO));
-		v4l2_i2c_new_probed_subdev(&btv->c.v4l2_dev,
-				&btv->c.i2c_adap, "tuner", "tuner",
-				v4l2_i2c_tuner_addrs(ADDRS_DEMOD));
-		v4l2_i2c_new_probed_subdev(&btv->c.v4l2_dev,
-				&btv->c.i2c_adap, "tuner", "tuner",
-				v4l2_i2c_tuner_addrs(ADDRS_TV_WITH_DEMOD));
-
-		tun_setup.mode_mask = T_ANALOG_TV | T_DIGITAL_TV;
-		tun_setup.type = btv->tuner_type;
-		tun_setup.addr = addr;
-
-		if (bttv_tvcards[btv->c.type].has_radio)
-			tun_setup.mode_mask |= T_RADIO;
-
-		bttv_call_all(btv, tuner, s_type_addr, &tun_setup);
-	}
-
-	if (btv->tda9887_conf) {
-		struct v4l2_priv_tun_config tda9887_cfg;
-
-		tda9887_cfg.tuner = TUNER_TDA9887;
-		tda9887_cfg.priv = &btv->tda9887_conf;
-
-		bttv_call_all(btv, tuner, s_config, &tda9887_cfg);
-	}
-
 	btv->dig = bttv_tvcards[btv->c.type].has_dig_in ?
 		   bttv_tvcards[btv->c.type].video_inputs - 1 : UNSET;
 	btv->svhs = bttv_tvcards[btv->c.type].svhs == NO_SVHS ?
@@ -3578,15 +3539,15 @@ void __devinit bttv_init_card2(struct bttv *btv)
 		btv->has_remote = remote[btv->c.nr];
 
 	if (bttv_tvcards[btv->c.type].has_radio)
-		btv->has_radio=1;
+		btv->has_radio = 1;
 	if (bttv_tvcards[btv->c.type].has_remote)
-		btv->has_remote=1;
+		btv->has_remote = 1;
 	if (!bttv_tvcards[btv->c.type].no_gpioirq)
-		btv->gpioirq=1;
+		btv->gpioirq = 1;
 	if (bttv_tvcards[btv->c.type].volume_gpio)
-		btv->volume_gpio=bttv_tvcards[btv->c.type].volume_gpio;
+		btv->volume_gpio = bttv_tvcards[btv->c.type].volume_gpio;
 	if (bttv_tvcards[btv->c.type].audio_mode_gpio)
-		btv->audio_mode_gpio=bttv_tvcards[btv->c.type].audio_mode_gpio;
+		btv->audio_mode_gpio = bttv_tvcards[btv->c.type].audio_mode_gpio;
 
 	if (btv->tuner_type == TUNER_ABSENT)
 		return;  /* no tuner or related drivers to load */
@@ -3704,6 +3665,49 @@ no_audio:
 }
 
 
+/* initialize the tuner */
+void __devinit bttv_init_tuner(struct bttv *btv)
+{
+	int addr = ADDR_UNSET;
+
+	if (ADDR_UNSET != bttv_tvcards[btv->c.type].tuner_addr)
+		addr = bttv_tvcards[btv->c.type].tuner_addr;
+
+	if (btv->tuner_type != TUNER_ABSENT) {
+		struct tuner_setup tun_setup;
+
+		/* Load tuner module before issuing tuner config call! */
+		if (bttv_tvcards[btv->c.type].has_radio)
+			v4l2_i2c_new_probed_subdev(&btv->c.v4l2_dev,
+				&btv->c.i2c_adap, "tuner", "tuner",
+				v4l2_i2c_tuner_addrs(ADDRS_RADIO));
+		v4l2_i2c_new_probed_subdev(&btv->c.v4l2_dev,
+				&btv->c.i2c_adap, "tuner", "tuner",
+				v4l2_i2c_tuner_addrs(ADDRS_DEMOD));
+		v4l2_i2c_new_probed_subdev(&btv->c.v4l2_dev,
+				&btv->c.i2c_adap, "tuner", "tuner",
+				v4l2_i2c_tuner_addrs(ADDRS_TV_WITH_DEMOD));
+
+		tun_setup.mode_mask = T_ANALOG_TV | T_DIGITAL_TV;
+		tun_setup.type = btv->tuner_type;
+		tun_setup.addr = addr;
+
+		if (bttv_tvcards[btv->c.type].has_radio)
+			tun_setup.mode_mask |= T_RADIO;
+
+		bttv_call_all(btv, tuner, s_type_addr, &tun_setup);
+	}
+
+	if (btv->tda9887_conf) {
+		struct v4l2_priv_tun_config tda9887_cfg;
+
+		tda9887_cfg.tuner = TUNER_TDA9887;
+		tda9887_cfg.priv = &btv->tda9887_conf;
+
+		bttv_call_all(btv, tuner, s_config, &tda9887_cfg);
+	}
+}
+
 /* ----------------------------------------------------------------------- */
 
 static void modtec_eeprom(struct bttv *btv)
diff --git a/linux/drivers/media/video/bt8xx/bttv-driver.c b/linux/drivers/media/video/bt8xx/bttv-driver.c
index 9c25efe06..18085ba61 100644
--- a/linux/drivers/media/video/bt8xx/bttv-driver.c
+++ b/linux/drivers/media/video/bt8xx/bttv-driver.c
@@ -4457,6 +4457,7 @@ static int __devinit bttv_probe(struct pci_dev *dev,
 
 	/* some card-specific stuff (needs working i2c) */
 	bttv_init_card2(btv);
+	bttv_init_tuner(btv);
 	init_irqreg(btv);
 
 	/* register video4linux + input */
diff --git a/linux/drivers/media/video/bt8xx/bttv.h b/linux/drivers/media/video/bt8xx/bttv.h
index 6b7b62bd4..a0cb26b4a 100644
--- a/linux/drivers/media/video/bt8xx/bttv.h
+++ b/linux/drivers/media/video/bt8xx/bttv.h
@@ -284,6 +284,7 @@ extern struct tvcard bttv_tvcards[];
 extern void bttv_idcard(struct bttv *btv);
 extern void bttv_init_card1(struct bttv *btv);
 extern void bttv_init_card2(struct bttv *btv);
+extern void bttv_init_tuner(struct bttv *btv);
 
 /* card-specific funtions */
 extern void tea5757_set_freq(struct bttv *btv, unsigned short freq);
diff --git a/linux/drivers/media/video/cx23885/cimax2.c b/linux/drivers/media/video/cx23885/cimax2.c
index fed6d9f9f..d717b9416 100644
--- a/linux/drivers/media/video/cx23885/cimax2.c
+++ b/linux/drivers/media/video/cx23885/cimax2.c
@@ -455,6 +455,7 @@ int netup_ci_init(struct cx23885_tsport *port)
 #else
 	INIT_WORK(&state->work, netup_read_ci_status);
 #endif
+	schedule_work(&state->work);
 
 	ci_dbg_print("%s: CI initialized!\n", __func__);
 
diff --git a/linux/drivers/media/video/cx23885/cx23885-417.c b/linux/drivers/media/video/cx23885/cx23885-417.c
index 9974d9a78..fe0b3c41d 100644
--- a/linux/drivers/media/video/cx23885/cx23885-417.c
+++ b/linux/drivers/media/video/cx23885/cx23885-417.c
@@ -57,7 +57,8 @@ MODULE_PARM_DESC(v4l_debug, "enable V4L debug messages");
 
 #define dprintk(level, fmt, arg...)\
 	do { if (v4l_debug >= level) \
-		printk(KERN_DEBUG "%s: " fmt, dev->name , ## arg);\
+		printk(KERN_DEBUG "%s: " fmt, \
+		(dev) ? dev->name : "cx23885[?]", ## arg); \
 	} while (0)
 
 static struct cx23885_tvnorm cx23885_tvnorms[] = {
@@ -628,6 +629,39 @@ int mc417_memory_read(struct cx23885_dev *dev, u32 address, u32 *value)
 	return retval;
 }
 
+void mc417_gpio_set(struct cx23885_dev *dev, u32 mask)
+{
+	u32 val;
+
+	/* Set the gpio value */
+	mc417_register_read(dev, 0x900C, &val);
+	val |= (mask & 0x000ffff);
+	mc417_register_write(dev, 0x900C, val);
+}
+
+void mc417_gpio_clear(struct cx23885_dev *dev, u32 mask)
+{
+	u32 val;
+
+	/* Clear the gpio value */
+	mc417_register_read(dev, 0x900C, &val);
+	val &= ~(mask & 0x0000ffff);
+	mc417_register_write(dev, 0x900C, val);
+}
+
+void mc417_gpio_enable(struct cx23885_dev *dev, u32 mask, int asoutput)
+{
+	u32 val;
+
+	/* Enable GPIO direction bits */
+	mc417_register_read(dev, 0x9020, &val);
+	if (asoutput)
+		val |= (mask & 0x0000ffff);
+	else
+		val &= ~(mask & 0x0000ffff);
+
+	mc417_register_write(dev, 0x9020, val);
+}
 /* ------------------------------------------------------------------ */
 
 /* MPEG encoder API */
@@ -953,25 +987,8 @@ static int cx23885_load_firmware(struct cx23885_dev *dev)
 	retval |= mc417_register_write(dev, IVTV_REG_HW_BLOCKS,
 		IVTV_CMD_HW_BLOCKS_RST);
 
-	/* Restore GPIO settings, make sure EIO14 is enabled as an output. */
-	dprintk(2, "%s: GPIO output EIO 0-15 was = 0x%x\n",
-		__func__, gpio_output);
-	/* Power-up seems to have GPIOs AFU. This was causing digital side
-	 * to fail at power-up. Seems GPIOs should be set to 0x10ff0411 at
-	 * power-up.
-	 * gpio_output |= (1<<14);
-	 */
-	/* Note: GPIO14 is specific to the HVR1800 here */
-	gpio_output = 0x10ff0411 | (1<<14);
-	retval |= mc417_register_write(dev, 0x9020, gpio_output | (1<<14));
-	dprintk(2, "%s: GPIO output EIO 0-15 now = 0x%x\n",
-		__func__, gpio_output);
-
-	dprintk(1, "%s: GPIO value  EIO 0-15 was = 0x%x\n",
-		__func__, value);
-	value |= (1<<14);
-	dprintk(1, "%s: GPIO value  EIO 0-15 now = 0x%x\n",
-		__func__, value);
+	/* F/W power up disturbs the GPIOs, restore state */
+	retval |= mc417_register_write(dev, 0x9020, gpio_output);
 	retval |= mc417_register_write(dev, 0x900C, value);
 
 	retval |= mc417_register_read(dev, IVTV_REG_VPU, &value);
@@ -1683,6 +1700,7 @@ static struct v4l2_file_operations mpeg_fops = {
 	.read	       = mpeg_read,
 	.poll          = mpeg_poll,
 	.mmap	       = mpeg_mmap,
+	.ioctl	       = video_ioctl2,
 };
 
 static const struct v4l2_ioctl_ops mpeg_ioctl_ops = {
@@ -1790,9 +1808,6 @@ int cx23885_417_register(struct cx23885_dev *dev)
 		return err;
 	}
 
-	/* Initialize MC417 registers */
-	cx23885_mc417_init(dev);
-
 	printk(KERN_INFO "%s: registered device video%d [mpeg]\n",
 	       dev->name, dev->v4l_device->num);
 
diff --git a/linux/drivers/media/video/cx23885/cx23885-cards.c b/linux/drivers/media/video/cx23885/cx23885-cards.c
index bf426f041..2ffc83e60 100644
--- a/linux/drivers/media/video/cx23885/cx23885-cards.c
+++ b/linux/drivers/media/video/cx23885/cx23885-cards.c
@@ -206,6 +206,11 @@ struct cx23885_board cx23885_boards[] = {
 		.name		= "Magic-Pro ProHDTV Extreme 2",
 		.portb		= CX23885_MPEG_DVB,
 	},
+	[CX23885_BOARD_HAUPPAUGE_HVR1850] = {
+		.name		= "Hauppauge WinTV-HVR1850",
+		.portb		= CX23885_MPEG_ENCODER,
+		.portc		= CX23885_MPEG_DVB,
+	},
 };
 const unsigned int cx23885_bcount = ARRAY_SIZE(cx23885_boards);
 
@@ -333,6 +338,10 @@ struct cx23885_subid cx23885_subids[] = {
 		.subvendor = 0x14f1,
 		.subdevice = 0x8657,
 		.card      = CX23885_BOARD_MAGICPRO_PROHDTVE2,
+	}, {
+		.subvendor = 0x0070,
+		.subdevice = 0x8541,
+		.card      = CX23885_BOARD_HAUPPAUGE_HVR1850,
 	},
 };
 const unsigned int cx23885_idcount = ARRAY_SIZE(cx23885_subids);
@@ -492,8 +501,13 @@ static void hauppauge_eeprom(struct cx23885_dev *dev, u8 *eeprom_data)
 		/* WinTV-HVR1700 (PCIe, OEM, No IR, full height)
 		 * DVB-T and MPEG2 HW Encoder */
 		break;
+	case 85021:
+		/* WinTV-HVR1850 (PCIe, OEM, RCA in, IR, FM,
+			Dual channel ATSC and MPEG2 HW Encoder */
+		break;
 	default:
-		printk(KERN_WARNING "%s: warning: unknown hauppauge model #%d\n",
+		printk(KERN_WARNING "%s: warning: "
+			"unknown hauppauge model #%d\n",
 			dev->name, tv.model);
 		break;
 	}
@@ -583,13 +597,23 @@ void cx23885_gpio_setup(struct cx23885_dev *dev)
 		/* CX23417 GPIO's */
 		/* EIO15 Zilog Reset */
 		/* EIO14 S5H1409/CX24227 Reset */
+		mc417_gpio_enable(dev, GPIO_15 | GPIO_14, 1);
+
+		/* Put the demod into reset and protect the eeprom */
+		mc417_gpio_clear(dev, GPIO_15 | GPIO_14);
+		mdelay(100);
+
+		/* Bring the demod and blaster out of reset */
+		mc417_gpio_set(dev, GPIO_15 | GPIO_14);
+		mdelay(100);
 
 		/* Force the TDA8295A into reset and back */
-		cx_set(GP0_IO, 0x00040004);
+		cx23885_gpio_enable(dev, GPIO_2, 1);
+		cx23885_gpio_set(dev, GPIO_2);
 		mdelay(20);
-		cx_clear(GP0_IO, 0x00000004);
+		cx23885_gpio_clear(dev, GPIO_2);
 		mdelay(20);
-		cx_set(GP0_IO, 0x00040004);
+		cx23885_gpio_set(dev, GPIO_2);
 		mdelay(20);
 		break;
 	case CX23885_BOARD_HAUPPAUGE_HVR1200:
@@ -733,6 +757,36 @@ void cx23885_gpio_setup(struct cx23885_dev *dev)
 		cx_set(GP0_IO, 0x00060006);
 		mdelay(100);
 		break;
+	case CX23885_BOARD_HAUPPAUGE_HVR1850:
+		/* GPIO-0 656_CLK */
+		/* GPIO-1 656_D0 */
+		/* GPIO-2 Wake# */
+		/* GPIO-3-10 cx23417 data0-7 */
+		/* GPIO-11-14 cx23417 addr0-3 */
+		/* GPIO-15-18 cx23417 READY, CS, RD, WR */
+		/* GPIO-19 IR_RX */
+		/* GPIO-20 C_IR_TX */
+		/* GPIO-21 I2S DAT */
+		/* GPIO-22 I2S WCLK */
+		/* GPIO-23 I2S BCLK */
+		/* ALT GPIO: EXP GPIO LATCH */
+
+		/* CX23417 GPIO's */
+		/* GPIO-14 S5H1411/CX24228 Reset */
+		/* GPIO-13 EEPROM write protect */
+		mc417_gpio_enable(dev, GPIO_14 | GPIO_13, 1);
+
+		/* Put the demod into reset and protect the eeprom */
+		mc417_gpio_clear(dev, GPIO_14 | GPIO_13);
+		mdelay(100);
+
+		/* Bring the demod out of reset */
+		mc417_gpio_set(dev, GPIO_14);
+		mdelay(100);
+
+		/* CX24228 GPIO */
+		/* Connected to IF / Mux */
+		break;
 	}
 }
 
@@ -749,6 +803,7 @@ int cx23885_ir_init(struct cx23885_dev *dev)
 	case CX23885_BOARD_HAUPPAUGE_HVR1275:
 	case CX23885_BOARD_HAUPPAUGE_HVR1255:
 	case CX23885_BOARD_HAUPPAUGE_HVR1210:
+	case CX23885_BOARD_HAUPPAUGE_HVR1850:
 		/* FIXME: Implement me */
 		break;
 	case CX23885_BOARD_DVICO_FUSIONHDTV_DVB_T_DUAL_EXP:
@@ -788,6 +843,7 @@ void cx23885_card_setup(struct cx23885_dev *dev)
 	case CX23885_BOARD_HAUPPAUGE_HVR1275:
 	case CX23885_BOARD_HAUPPAUGE_HVR1255:
 	case CX23885_BOARD_HAUPPAUGE_HVR1210:
+	case CX23885_BOARD_HAUPPAUGE_HVR1850:
 		if (dev->i2c_bus[0].i2c_rc == 0)
 			hauppauge_eeprom(dev, eeprom+0xc0);
 		break;
@@ -855,6 +911,7 @@ void cx23885_card_setup(struct cx23885_dev *dev)
 	case CX23885_BOARD_HAUPPAUGE_HVR1275:
 	case CX23885_BOARD_HAUPPAUGE_HVR1255:
 	case CX23885_BOARD_HAUPPAUGE_HVR1210:
+	case CX23885_BOARD_HAUPPAUGE_HVR1850:
 	default:
 		ts2->gen_ctrl_val  = 0xc; /* Serial bus + punctured clock */
 		ts2->ts_clk_en_val = 0x1; /* Enable TS_CLK */
diff --git a/linux/drivers/media/video/cx23885/cx23885-core.c b/linux/drivers/media/video/cx23885/cx23885-core.c
index 6988361c9..4854d54f1 100644
--- a/linux/drivers/media/video/cx23885/cx23885-core.c
+++ b/linux/drivers/media/video/cx23885/cx23885-core.c
@@ -714,12 +714,26 @@ static void cx23885_dev_checkrevision(struct cx23885_dev *dev)
 		dev->hwrevision = 0xa1;
 		break;
 	case 0x02:
-		/* CX23885-13Z */
+		/* CX23885-13Z/14Z */
 		dev->hwrevision = 0xb0;
 		break;
 	case 0x03:
-		/* CX23888-22Z */
-		dev->hwrevision = 0xc0;
+		if (dev->pci->device == 0x8880) {
+			/* CX23888-21Z/22Z */
+			dev->hwrevision = 0xc0;
+		} else {
+			/* CX23885-14Z */
+			dev->hwrevision = 0xa4;
+		}
+		break;
+	case 0x04:
+		if (dev->pci->device == 0x8880) {
+			/* CX23888-31Z */
+			dev->hwrevision = 0xd0;
+		} else {
+			/* CX23885-15Z, CX23888-31Z */
+			dev->hwrevision = 0xa5;
+		}
 		break;
 	case 0x0e:
 		/* CX23887-15Z */
@@ -757,6 +771,7 @@ static int cx23885_dev_setup(struct cx23885_dev *dev)
 
 	/* Configure the internal memory */
 	if (dev->pci->device == 0x8880) {
+		/* Could be 887 or 888, assume a default */
 		dev->bridge = CX23885_BRIDGE_887;
 		/* Apply a sensible clock frequency for the PCIe bridge */
 		dev->clk_freq = 25000000;
@@ -869,6 +884,14 @@ static int cx23885_dev_setup(struct cx23885_dev *dev)
 	dprintk(1, "%s() radio_type = 0x%x radio_addr = 0x%x\n",
 		__func__, dev->radio_type, dev->radio_addr);
 
+	/* The cx23417 encoder has GPIO's that need to be initialised
+	 * before DVB, so that demodulators and tuners are out of
+	 * reset before DVB uses them.
+	 */
+	if ((cx23885_boards[dev->board].portb == CX23885_MPEG_ENCODER) ||
+		(cx23885_boards[dev->board].portc == CX23885_MPEG_ENCODER))
+			cx23885_mc417_init(dev);
+
 	/* init hardware */
 	cx23885_reset(dev);
 
@@ -1251,6 +1274,7 @@ static int cx23885_start_dma(struct cx23885_tsport *port,
 	switch (dev->bridge) {
 	case CX23885_BRIDGE_885:
 	case CX23885_BRIDGE_887:
+	case CX23885_BRIDGE_888:
 		/* enable irqs */
 		dprintk(1, "%s() enabling TS int's and DMA\n", __func__);
 		cx_set(port->reg_ts_int_msk,  port->ts_int_msk_val);
diff --git a/linux/drivers/media/video/cx23885/cx23885-dvb.c b/linux/drivers/media/video/cx23885/cx23885-dvb.c
index 85fac41e7..9c690a9bd 100644
--- a/linux/drivers/media/video/cx23885/cx23885-dvb.c
+++ b/linux/drivers/media/video/cx23885/cx23885-dvb.c
@@ -397,7 +397,7 @@ static struct stv0900_reg stv0900_ts_regs[] = {
 
 static struct stv0900_config netup_stv0900_config = {
 	.demod_address = 0x68,
-	.xtal = 27000000,
+	.xtal = 8000000,
 	.clkmode = 3,/* 0-CLKI, 2-XTALI, else AUTO */
 	.diseqc_mode = 2,/* 2/3 PWM */
 	.ts_config_regs = stv0900_ts_regs,
@@ -409,14 +409,14 @@ static struct stv0900_config netup_stv0900_config = {
 
 static struct stv6110_config netup_stv6110_tunerconfig_a = {
 	.i2c_address = 0x60,
-	.mclk = 27000000,
-	.iq_wiring = 0,
+	.mclk = 16000000,
+	.clk_div = 1,
 };
 
 static struct stv6110_config netup_stv6110_tunerconfig_b = {
 	.i2c_address = 0x63,
-	.mclk = 27000000,
-	.iq_wiring = 1,
+	.mclk = 16000000,
+	.clk_div = 1,
 };
 
 static int tbs_set_voltage(struct dvb_frontend *fe, fe_sec_voltage_t voltage)
@@ -867,6 +867,17 @@ static int dvb_register(struct cx23885_tsport *port)
 				&magicpro_prohdtve2_xc5000_config);
 		}
 		break;
+	case CX23885_BOARD_HAUPPAUGE_HVR1850:
+		i2c_bus = &dev->i2c_bus[0];
+		fe0->dvb.frontend = dvb_attach(s5h1411_attach,
+			&hcw_s5h1411_config,
+			&i2c_bus->i2c_adap);
+		if (fe0->dvb.frontend != NULL)
+			dvb_attach(tda18271_attach, fe0->dvb.frontend,
+				0x60, &dev->i2c_bus[0].i2c_adap,
+				&hauppauge_tda18271_config);
+		break;
+
 	default:
 		printk(KERN_INFO "%s: The frontend of your DVB/ATSC card "
 			" isn't supported yet\n",
diff --git a/linux/drivers/media/video/cx23885/cx23885.h b/linux/drivers/media/video/cx23885/cx23885.h
index 2a384e6aa..6ddabc263 100644
--- a/linux/drivers/media/video/cx23885/cx23885.h
+++ b/linux/drivers/media/video/cx23885/cx23885.h
@@ -78,6 +78,7 @@
 #define CX23885_BOARD_HAUPPAUGE_HVR1210        21
 #define CX23885_BOARD_MYGICA_X8506             22
 #define CX23885_BOARD_MAGICPRO_PROHDTVE2       23
+#define CX23885_BOARD_HAUPPAUGE_HVR1850        24
 
 #define GPIO_0 0x00000001
 #define GPIO_1 0x00000002
@@ -89,6 +90,12 @@
 #define GPIO_7 0x00000080
 #define GPIO_8 0x00000100
 #define GPIO_9 0x00000200
+#define GPIO_10 0x00000400
+#define GPIO_11 0x00000800
+#define GPIO_12 0x00001000
+#define GPIO_13 0x00002000
+#define GPIO_14 0x00004000
+#define GPIO_15 0x00008000
 
 /* Currently unsupported by the driver: PAL/H, NTSC/Kr, SECAM B/G/H/LC */
 #define CX23885_NORMS (\
@@ -333,6 +340,7 @@ struct cx23885_dev {
 		CX23885_BRIDGE_UNDEFINED = 0,
 		CX23885_BRIDGE_885 = 885,
 		CX23885_BRIDGE_887 = 887,
+		CX23885_BRIDGE_888 = 888,
 	} bridge;
 
 	/* Analog video */
@@ -506,6 +514,9 @@ extern void cx23885_417_check_encoder(struct cx23885_dev *dev);
 extern void cx23885_mc417_init(struct cx23885_dev *dev);
 extern int mc417_memory_read(struct cx23885_dev *dev, u32 address, u32 *value);
 extern int mc417_memory_write(struct cx23885_dev *dev, u32 address, u32 value);
+extern void mc417_gpio_set(struct cx23885_dev *dev, u32 mask);
+extern void mc417_gpio_clear(struct cx23885_dev *dev, u32 mask);
+extern void mc417_gpio_enable(struct cx23885_dev *dev, u32 mask, int asoutput);
 
 
 /* ----------------------------------------------------------- */
diff --git a/v4l/versions.txt b/v4l/versions.txt
index 792419f99..01b553d6c 100644
--- a/v4l/versions.txt
+++ b/v4l/versions.txt
@@ -26,11 +26,13 @@ SOC_CAMERA
 SOC_CAMERA_MT9V022
 SOC_CAMERA_MT9M001
 
+[2.6.24]
+# Some freezer routines
+USB_GSPCA_SN9C20X_EVDEV
+
 [2.6.23]
 # Needs field intf_assoc in struct usb_host_config
 VIDEO_CX231XX
-# Some freezer routines
-USB_GSPCA_SN9C20X_EVDEV
 
 [2.6.22]
 #This driver requires I2C probe/remove fields
diff --git a/v4l2-apps/util/v4l2-ctl.cpp b/v4l2-apps/util/v4l2-ctl.cpp
index 3355f28e6..b2246c557 100644
--- a/v4l2-apps/util/v4l2-ctl.cpp
+++ b/v4l2-apps/util/v4l2-ctl.cpp
@@ -147,6 +147,7 @@ static unsigned capabilities;
 typedef std::vector<struct v4l2_ext_control> ctrl_list;
 static ctrl_list user_ctrls;
 static ctrl_list mpeg_ctrls;
+static ctrl_list camera_ctrls;
 
 typedef std::map<std::string, unsigned> ctrl_strmap;
 static ctrl_strmap ctrl_str2id;
@@ -2191,6 +2192,8 @@ set_vid_fmt_error:
 			ctrl.value = strtol(iter->second.c_str(), NULL, 0);
 			if (V4L2_CTRL_ID2CLASS(ctrl.id) == V4L2_CTRL_CLASS_MPEG)
 				mpeg_ctrls.push_back(ctrl);
+			else if (V4L2_CTRL_ID2CLASS(ctrl.id) == V4L2_CTRL_CLASS_CAMERA)
+				camera_ctrls.push_back(ctrl);
 			else
 				user_ctrls.push_back(ctrl);
 		}
@@ -2221,6 +2224,22 @@ set_vid_fmt_error:
 				}
 			}
 		}
+		if (camera_ctrls.size()) {
+			ctrls.ctrl_class = V4L2_CTRL_CLASS_CAMERA;
+			ctrls.count = camera_ctrls.size();
+			ctrls.controls = &camera_ctrls[0];
+			if (doioctl(fd, VIDIOC_S_EXT_CTRLS, &ctrls, "VIDIOC_S_EXT_CTRLS")) {
+				if (ctrls.error_idx >= ctrls.count) {
+					fprintf(stderr, "Error setting CAMERA controls: %s\n",
+						strerror(errno));
+				}
+				else {
+					fprintf(stderr, "%s: %s\n",
+						ctrl_id2str[camera_ctrls[ctrls.error_idx].id].c_str(),
+						strerror(errno));
+				}
+			}
+		}
 	}
 
 	/* Get options */
@@ -2436,6 +2455,7 @@ set_vid_fmt_error:
 		struct v4l2_ext_controls ctrls = { 0 };
 
 		mpeg_ctrls.clear();
+		camera_ctrls.clear();
 		user_ctrls.clear();
 		for (ctrl_get_list::iterator iter = get_ctrls.begin();
 				iter != get_ctrls.end(); ++iter) {
@@ -2444,6 +2464,8 @@ set_vid_fmt_error:
 			ctrl.id = ctrl_str2id[*iter];
 			if (V4L2_CTRL_ID2CLASS(ctrl.id) == V4L2_CTRL_CLASS_MPEG)
 				mpeg_ctrls.push_back(ctrl);
+			else if (V4L2_CTRL_ID2CLASS(ctrl.id) == V4L2_CTRL_CLASS_CAMERA)
+				camera_ctrls.push_back(ctrl);
 			else
 				user_ctrls.push_back(ctrl);
 		}
@@ -2465,6 +2487,17 @@ set_vid_fmt_error:
 				printf("%s: %d\n", ctrl_id2str[ctrl.id].c_str(), ctrl.value);
 			}
 		}
+		if (camera_ctrls.size()) {
+			ctrls.ctrl_class = V4L2_CTRL_CLASS_CAMERA;
+			ctrls.count = camera_ctrls.size();
+			ctrls.controls = &camera_ctrls[0];
+			doioctl(fd, VIDIOC_G_EXT_CTRLS, &ctrls, "VIDIOC_G_EXT_CTRLS");
+			for (unsigned i = 0; i < camera_ctrls.size(); i++) {
+				struct v4l2_ext_control ctrl = camera_ctrls[i];
+
+				printf("%s: %d\n", ctrl_id2str[ctrl.id].c_str(), ctrl.value);
+			}
+		}
 	}
 
 	if (options[OptGetTuner]) {