em28xx: replace some magic by register descriptions where known

From: Mauro Carvalho Chehab <mchehab@redhat.com>

Replaces all occurrences of em28xx_write_regs_req() and em28xx_write_reg()
used to setup register names by em28xx_write_reg().

Also, documents the register names that are known.

This patch were generated by this small perl script:

my %reg_map = (
	# Register table - the same as defined on parse_em28xx.pl script
);

while (<>) {
	if (m/(.*)em28xx_write_regs_req\(dev\,\s*0x00\,\s*(.*)\,\s*\"\\x(..)\",\s*1\)\;(.*)/) {
		my $reg = $2;
		my $val = $3;
		$val =~ tr/A-f/a-f/;
		$reg = $reg_map{$reg} if defined($reg_map{$reg});
		printf "$1em28xx_write_reg(dev, %s, 0x%s);$4\n", $reg, $val;
	} elsif (m/(.*)em28xx_write_regs\(dev\,\s*(.*)\,\s*\"\\x(..)\",\s*1\)\;(.*)/) {
		my $reg = $2;
		my $val = $3;
		$val =~ tr/A-f/a-f/;
		$reg = $reg_map{$reg} if defined($reg_map{$reg});
		printf "$1em28xx_write_reg(dev, %s, 0x%s);$4\n", $reg, $val;
	} else {
		print $_;
	}
}

Priority: normal

Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

3 files changed, 31 insertions, 31 deletions

diff --git a/linux/drivers/media/video/em28xx/em28xx-core.c b/linux/drivers/media/video/em28xx/em28xx-core.c
index f70cffb4a..d63e5b997 100644
--- a/linux/drivers/media/video/em28xx/em28xx-core.c
+++ b/linux/drivers/media/video/em28xx/em28xx-core.c
@@ -558,20 +558,20 @@ EXPORT_SYMBOL_GPL(em28xx_audio_setup);
 
 int em28xx_colorlevels_set_default(struct em28xx *dev)
 {
-	em28xx_write_regs(dev, EM28XX_R20_YGAIN, "\x10", 1);	/* contrast */
-	em28xx_write_regs(dev, EM28XX_R21_YOFFSET, "\x00", 1);	/* brightness */
-	em28xx_write_regs(dev, EM28XX_R22_UVGAIN, "\x10", 1);	/* saturation */
-	em28xx_write_regs(dev, EM28XX_R23_UOFFSET, "\x00", 1);
-	em28xx_write_regs(dev, EM28XX_R24_VOFFSET, "\x00", 1);
-	em28xx_write_regs(dev, EM28XX_R25_SHARPNESS, "\x00", 1);
-
-	em28xx_write_regs(dev, EM28XX_R14_GAMMA, "\x20", 1);
-	em28xx_write_regs(dev, EM28XX_R15_RGAIN, "\x20", 1);
-	em28xx_write_regs(dev, EM28XX_R16_GGAIN, "\x20", 1);
-	em28xx_write_regs(dev, EM28XX_R17_BGAIN, "\x20", 1);
-	em28xx_write_regs(dev, EM28XX_R18_ROFFSET, "\x00", 1);
-	em28xx_write_regs(dev, EM28XX_R19_GOFFSET, "\x00", 1);
-	return em28xx_write_regs(dev, EM28XX_R1A_BOFFSET, "\x00", 1);
+	em28xx_write_reg(dev, EM28XX_R20_YGAIN, 0x10);	/* contrast */
+	em28xx_write_reg(dev, EM28XX_R21_YOFFSET, 0x00);	/* brightness */
+	em28xx_write_reg(dev, EM28XX_R22_UVGAIN, 0x10);	/* saturation */
+	em28xx_write_reg(dev, EM28XX_R23_UOFFSET, 0x00);
+	em28xx_write_reg(dev, EM28XX_R24_VOFFSET, 0x00);
+	em28xx_write_reg(dev, EM28XX_R25_SHARPNESS, 0x00);
+
+	em28xx_write_reg(dev, EM28XX_R14_GAMMA, 0x20);
+	em28xx_write_reg(dev, EM28XX_R15_RGAIN, 0x20);
+	em28xx_write_reg(dev, EM28XX_R16_GGAIN, 0x20);
+	em28xx_write_reg(dev, EM28XX_R17_BGAIN, 0x20);
+	em28xx_write_reg(dev, EM28XX_R18_ROFFSET, 0x00);
+	em28xx_write_reg(dev, EM28XX_R19_GOFFSET, 0x00);
+	return em28xx_write_reg(dev, EM28XX_R1A_BOFFSET, 0x00);
 }
 
 int em28xx_capture_start(struct em28xx *dev, int start)
@@ -604,17 +604,17 @@ int em28xx_capture_start(struct em28xx *dev, int start)
 
 	if (!start) {
 		/* disable video capture */
-		rc = em28xx_write_regs(dev, EM28XX_R12_VINENABLE, "\x27", 1);
+		rc = em28xx_write_reg(dev, EM28XX_R12_VINENABLE, 0x27);
 		return rc;
 	}
 
 	/* enable video capture */
-	rc = em28xx_write_regs_req(dev, 0x00, 0x48, "\x00", 1);
+	rc = em28xx_write_reg(dev, 0x48, 0x00);
 
 	if (dev->mode == EM28XX_ANALOG_MODE)
-		rc = em28xx_write_regs(dev, EM28XX_R12_VINENABLE, "\x67", 1);
+		rc = em28xx_write_reg(dev, EM28XX_R12_VINENABLE, 0x67);
 	else
-		rc = em28xx_write_regs(dev, EM28XX_R12_VINENABLE, "\x37", 1);
+		rc = em28xx_write_reg(dev, EM28XX_R12_VINENABLE, 0x37);
 
 	msleep(6);
 
@@ -623,9 +623,9 @@ int em28xx_capture_start(struct em28xx *dev, int start)
 
 int em28xx_outfmt_set_yuv422(struct em28xx *dev)
 {
-	em28xx_write_regs(dev, EM28XX_R27_OUTFMT, "\x34", 1);
-	em28xx_write_regs(dev, EM28XX_R10_VINMODE, "\x10", 1);
-	return em28xx_write_regs(dev, EM28XX_R11_VINCTRL, "\x11", 1);
+	em28xx_write_reg(dev, EM28XX_R27_OUTFMT, 0x34);
+	em28xx_write_reg(dev, EM28XX_R10_VINMODE, 0x10);
+	return em28xx_write_reg(dev, EM28XX_R11_VINCTRL, 0x11);
 }
 
 static int em28xx_accumulator_set(struct em28xx *dev, u8 xmin, u8 xmax,
@@ -741,11 +741,11 @@ int em28xx_gpio_set(struct em28xx *dev, struct em28xx_reg_seq *gpio)
 	if (!gpio)
 		return rc;
 
-	dev->em28xx_write_regs_req(dev, 0x00, 0x48, "\x00", 1);
+	em28xx_write_reg(dev, 0x48, 0x00);
 	if (dev->mode == EM28XX_ANALOG_MODE)
-		dev->em28xx_write_regs_req(dev, 0x00, 0x12, "\x67", 1);
+		em28xx_write_reg(dev, EM28XX_R12_VINENABLE, 0x67);
 	else
-		dev->em28xx_write_regs_req(dev, 0x00, 0x12, "\x37", 1);
+		em28xx_write_reg(dev, EM28XX_R12_VINENABLE, 0x37);
 	msleep(6);
 
 	/* Send GPIO reset sequences specified at board entry */
diff --git a/linux/drivers/media/video/em28xx/em28xx-video.c b/linux/drivers/media/video/em28xx/em28xx-video.c
index 12f7fa0a3..bc3a59a57 100644
--- a/linux/drivers/media/video/em28xx/em28xx-video.c
+++ b/linux/drivers/media/video/em28xx/em28xx-video.c
@@ -522,7 +522,7 @@ static int em28xx_config(struct em28xx *dev)
 
 	/* Sets I2C speed to 100 KHz */
 	if (!dev->board.is_em2800) {
-		retval = em28xx_write_regs_req(dev, 0x00, 0x06, "\x40", 1);
+		retval = em28xx_write_reg(dev, EM28XX_R06_I2C_CLK, 0x40);
 		if (retval < 0) {
 			em28xx_errdev("%s: em28xx_write_regs_req failed! retval [%d]\n",
 				__func__, retval);
@@ -533,9 +533,9 @@ static int em28xx_config(struct em28xx *dev)
 #if 1
 	/* enable vbi capturing */
 
-/*	em28xx_write_regs_req(dev, 0x00, 0x0e, "\xC0", 1); audio register */
-/*	em28xx_write_regs_req(dev, 0x00, 0x0f, "\x80", 1); clk register */
-	em28xx_write_regs_req(dev, 0x00, 0x11, "\x51", 1);
+/*	em28xx_write_reg(dev, EM28XX_R0E_AUDIOSRC, 0xc0); audio register */
+/*	em28xx_write_reg(dev, EM28XX_R0F_XCLK, 0x80); clk register */
+	em28xx_write_reg(dev, EM28XX_R11_VINCTRL, 0x51);
 #endif
 
 	dev->mute = 1;		/* maybe not the right place... */
@@ -2165,7 +2165,7 @@ static int em28xx_init_dev(struct em28xx **devhandle, struct usb_device *udev,
 
 	if (dev->board.has_msp34xx) {
 		/* Send a reset to other chips via gpio */
-		errCode = em28xx_write_regs_req(dev, 0x00, 0x08, "\xf7", 1);
+		errCode = em28xx_write_reg(dev, EM28XX_R08_GPIO, 0xf7);
 		if (errCode < 0) {
 			em28xx_errdev("%s: em28xx_write_regs_req - msp34xx(1) failed! errCode [%d]\n",
 				__func__, errCode);
@@ -2173,7 +2173,7 @@ static int em28xx_init_dev(struct em28xx **devhandle, struct usb_device *udev,
 		}
 		msleep(3);
 
-		errCode = em28xx_write_regs_req(dev, 0x00, 0x08, "\xff", 1);
+		errCode = em28xx_write_reg(dev, EM28XX_R08_GPIO, 0xff);
 		if (errCode < 0) {
 			em28xx_errdev("%s: em28xx_write_regs_req - msp34xx(2) failed! errCode [%d]\n",
 				__func__, errCode);
diff --git a/linux/drivers/media/video/em28xx/em28xx.h b/linux/drivers/media/video/em28xx/em28xx.h
index bea105250..81acbd1a2 100644
--- a/linux/drivers/media/video/em28xx/em28xx.h
+++ b/linux/drivers/media/video/em28xx/em28xx.h
@@ -630,7 +630,7 @@ int em28xx_ir_fini(struct em28xx *dev);
 static inline int em28xx_compression_disable(struct em28xx *dev)
 {
 	/* side effect of disabling scaler and mixer */
-	return em28xx_write_regs(dev, EM28XX_R26_COMPR, "\x00", 1);
+	return em28xx_write_reg(dev, EM28XX_R26_COMPR, 0x00);
 }
 
 static inline int em28xx_contrast_get(struct em28xx *dev)