diff options
| author | Mauro Carvalho Chehab <mchehab@infradead.org> | 2008-03-13 10:57:22 -0300 |
|---|---|---|
| committer | Mauro Carvalho Chehab <mchehab@infradead.org> | 2008-03-13 10:57:22 -0300 |
| commit | 4918f1ace7068a600cf544f576eb794c99b8e42b (patch) | |
| tree | 61e7da276fef6269977e3d70f79838cdf4856287 /linux/Documentation/video4linux/CARDLIST.bttv | |
| parent | 9e0da75b38a18187f11535f7b1ee6cfc2eb78a17 (diff) | |
| download | mediapointer-dvb-s2-4918f1ace7068a600cf544f576eb794c99b8e42b.tar.gz mediapointer-dvb-s2-4918f1ace7068a600cf544f576eb794c99b8e42b.tar.bz2 | |
Support for a 16-channel bt878 card
From: Ernesto Hernández-Novich <emhn@usb.ve>
I have what looks like a Geovision GV-600 (or 650) card. It has a large
chip in the middle labeled
CONEXANT
FUSION 878A
25878-13
E345881.1
0312 TAIWAN
It has an audio connector coming out from a chip labeled
ATMEL
0242
AT89C2051-24PI
It is identified as follows on my Debian GNU/Linux Etch (kernel 2.6.18)
...
01:0a.0 Multimedia video controller: Brooktree Corporation Bt878 Video Capture (rev 11)
01:0a.1 Multimedia controller: Brooktree Corporation Bt878 Audio Capture (rev 11)
...
01:0a.0 0400: 109e:036e (rev 11)
Subsystem: 008a:763c
Flags: bus master, medium devsel, latency 64, IRQ 58
Memory at dfffe000 (32-bit, prefetchable) [size=4K]
Capabilities: [44] Vital Product Data
Capabilities: [4c] Power Management version 2
01:0a.1 0480: 109e:0878 (rev 11)
Subsystem: 008a:763c
Flags: bus master, medium devsel, latency 64, IRQ 58
Memory at dffff000 (32-bit, prefetchable) [size=4K]
Capabilities: [44] Vital Product Data
Capabilities: [4c] Power Management version 2
It was being detected as a GENERIC UNKNOWN CARD both by the 2.6.18
kernel and the latest v4l-dvb drivers, but it did not work at all. The
card has sixteen (16) BNC video inputs, four of them on the board itself
and twelve on three daughter-cards. It has a single bt878 chip, no tuner
and what looks like and audio input. After doing some research I managed
to get only eight channels working by forcing card=125 and those DID NOT
match channels 0-7 on the card, and no audio.
Based on what was working for card=125, I added the card definition
block, added a specific muxsel routine and got the card working fully
with xawtv, where the sixteen channels show up as Composite0 to
Composite15, matching the channel labels in the card and daughter-cards.
I have made no efforts yet to get audio working, but would appreciate
any pointers.
Signed-off-by: Ernesto Hernández-Novich <emhn@usb.ve>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
Diffstat (limited to 'linux/Documentation/video4linux/CARDLIST.bttv')
| -rw-r--r-- | linux/Documentation/video4linux/CARDLIST.bttv | 1 |
1 files changed, 1 insertions, 0 deletions
diff --git a/linux/Documentation/video4linux/CARDLIST.bttv b/linux/Documentation/video4linux/CARDLIST.bttv index d97cf7cc6..17911d038 100644 --- a/linux/Documentation/video4linux/CARDLIST.bttv +++ b/linux/Documentation/video4linux/CARDLIST.bttv @@ -148,3 +148,4 @@ 147 -> VoodooTV 200 (USA) [121a:3000] 148 -> DViCO FusionHDTV 2 [dbc0:d200] 149 -> Typhoon TV-Tuner PCI (50684) +150 -> Geovision GV-600 [008a:763c] |