Patch from Peter Hettkamp, Adam Szalkowski to add support for pinnacle

pctv-sat

1 files changed, 79 insertions, 1 deletions

diff --git a/linux/drivers/media/dvb/bt8xx/dvb-bt8xx.c b/linux/drivers/media/dvb/bt8xx/dvb-bt8xx.c
index cedd03521..89bd546b0 100644
--- a/linux/drivers/media/dvb/bt8xx/dvb-bt8xx.c
+++ b/linux/drivers/media/dvb/bt8xx/dvb-bt8xx.c
@@ -181,6 +181,70 @@ static struct mt352_config thomson_dtt7579_config = {
 	.pll_set = thomson_dtt7579_pll_set,
 };
 
+static int cx24108_pll_set(struct dvb_frontend* fe, struct dvb_frontend_parameters* params)
+{
+   u32 freq = params->frequency;
+   
+   int i, a, n, pump; 
+   u32 band, pll;
+   
+   
+   u32 osci[]={950000,1019000,1075000,1178000,1296000,1432000,
+               1576000,1718000,1856000,2036000,2150000};
+   u32 bandsel[]={0,0x00020000,0x00040000,0x00100800,0x00101000,
+               0x00102000,0x00104000,0x00108000,0x00110000,
+               0x00120000,0x00140000};
+   
+#define XTAL 1011100 /* Hz, really 1.0111 MHz and a /10 prescaler */
+        printk("cx24108 debug: entering SetTunerFreq, freq=%d\n",freq);
+        
+        /* This is really the bit driving the tuner chip cx24108 */
+        
+        if(freq<950000) freq=950000; /* kHz */
+        if(freq>2150000) freq=2150000; /* satellite IF is 950..2150MHz */
+        
+        /* decide which VCO to use for the input frequency */
+        for(i=1;(i<sizeof(osci)/sizeof(osci[0]))&&(osci[i]<freq);i++);
+        printk("cx24108 debug: select vco #%d (f=%d)\n",i,freq);
+        band=bandsel[i];
+        /* the gain values must be set by SetSymbolrate */
+        /* compute the pll divider needed, from Conexant data sheet,
+           resolved for (n*32+a), remember f(vco) is f(receive) *2 or *4,
+           depending on the divider bit. It is set to /4 on the 2 lowest 
+           bands  */
+        n=((i<=2?2:1)*freq*10L)/(XTAL/100);
+        a=n%32; n/=32; if(a==0) n--;
+        pump=(freq<(osci[i-1]+osci[i])/2);
+        pll=0xf8000000|
+            ((pump?1:2)<<(14+11))|
+            ((n&0x1ff)<<(5+11))|
+            ((a&0x1f)<<11);
+        /* everything is shifted left 11 bits to left-align the bits in the
+           32bit word. Output to the tuner goes MSB-aligned, after all */
+        printk("cx24108 debug: pump=%d, n=%d, a=%d\n",pump,n,a);
+        cx24110_pll_write(fe,band);
+        /* set vga and vca to their widest-band settings, as a precaution.
+           SetSymbolrate might not be called to set this up */
+        cx24110_pll_write(fe,0x500c0000);
+        cx24110_pll_write(fe,0x83f1f800);
+        cx24110_pll_write(fe,pll);
+/*        writereg(client,0x56,0x7f);*/
+
+	return 0;
+}
+
+static int pinnsat_pll_init(struct dvb_frontend* fe)
+{
+   return 0;
+}
+
+
+static struct cx24110_config pctvsat_config = {
+
+	.demod_address = 0x55,
+	.pll_init = pinnsat_pll_init,
+	.pll_set = cx24108_pll_set,
+};
 
 
 static int microtune_mt7202dtf_pll_set(struct dvb_frontend* fe, struct dvb_frontend_parameters* params)
@@ -387,6 +451,13 @@ static void frontend_init(struct dvb_bt8xx_card *card, u32 type)
 			break;
 		}
 		break;
+	
+	case BTTV_PINNACLESAT:
+		card->fe = cx24110_attach(&pctvsat_config, card->i2c_adapter);
+		if (card->fe != NULL) {
+			break;
+		}
+		break;
 	}
 
 	if (card->fe == NULL) {
@@ -510,7 +581,14 @@ static int dvb_bt8xx_probe(struct device *dev)
 
 	switch(sub->core->type)
 	{
-/*	case BTTV_PINNACLESAT: UNDEFINED HARDWARE */
+	case BTTV_PINNACLESAT:
+		card->gpio_mode = 0x0400c060;
+		/* should be: BT878_A_GAIN=0,BT878_A_PWRDN,BT878_DA_DPM,BT878_DA_SBR,
+		              BT878_DA_IOM=1,BT878_DA_APP to enable serial highspeed mode. */
+		card->op_sync_orin = 0;
+		card->irq_err_ignore = 0;
+		break;
+		
 #ifdef BTTV_DVICO_DVBT_LITE
 	case BTTV_DVICO_DVBT_LITE:
 #endif