merge: http://linuxtv.org/hg/~anttip/reddo-dvb-c/

From: Mauro Carvalho Chehab <mchehab@redhat.com>

Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

4 files changed, 541 insertions, 22 deletions

diff --git a/linux/drivers/media/dvb/dvb-usb/Kconfig b/linux/drivers/media/dvb/dvb-usb/Kconfig
index 8b8bc04ee..c5ec9a5f3 100644
--- a/linux/drivers/media/dvb/dvb-usb/Kconfig
+++ b/linux/drivers/media/dvb/dvb-usb/Kconfig
@@ -71,6 +71,7 @@ config DVB_USB_DIB0700
 	depends on DVB_USB
 	select DVB_DIB7000P if !DVB_FE_CUSTOMISE
 	select DVB_DIB7000M if !DVB_FE_CUSTOMISE
+	select DVB_DIB8000 if !DVB_FE_CUSTOMISE
 	select DVB_DIB3000MC if !DVB_FE_CUSTOMISE
 	select DVB_S5H1411 if !DVB_FE_CUSTOMISE
 	select DVB_LGDT3305 if !DVB_FE_CUSTOMISE
@@ -87,7 +88,7 @@ config DVB_USB_DIB0700
 	  Avermedia and other big and small companies.
 
 	  For an up-to-date list of devices supported by this driver, have a look
-	  on the Linux-DVB Wiki at www.linuxtv.org.
+	  on the LinuxTV Wiki at www.linuxtv.org.
 
 	  Say Y if you own such a device and want to use it. You should build it as
 	  a module.
diff --git a/linux/drivers/media/dvb/dvb-usb/af9015.c b/linux/drivers/media/dvb/dvb-usb/af9015.c
index 69a00d610..ab505a268 100644
--- a/linux/drivers/media/dvb/dvb-usb/af9015.c
+++ b/linux/drivers/media/dvb/dvb-usb/af9015.c
@@ -61,10 +61,13 @@ static struct af9013_config af9015_af9013_config[] = {
 
 static int af9015_rw_udev(struct usb_device *udev, struct req_t *req)
 {
+#define BUF_LEN 63
+#define REQ_HDR_LEN 8 /* send header size */
+#define ACK_HDR_LEN 2 /* rece header size */
 	int act_len, ret;
-	u8 buf[64];
+	u8 buf[BUF_LEN];
 	u8 write = 1;
-	u8 msg_len = 8;
+	u8 msg_len = REQ_HDR_LEN;
 	static u8 seq; /* packet sequence number */
 
 	if (mutex_lock_interruptible(&af9015_usb_mutex) < 0)
@@ -94,7 +97,7 @@ static int af9015_rw_udev(struct usb_device *udev, struct req_t *req)
 		break;
 	case WRITE_MEMORY:
 		if (((req->addr & 0xff00) == 0xff00) ||
-		    ((req->addr & 0xae00) == 0xae00))
+		    ((req->addr & 0xff00) == 0xae00))
 			buf[0] = WRITE_VIRTUAL_MEMORY;
 	case WRITE_VIRTUAL_MEMORY:
 	case COPY_FIRMWARE:
@@ -107,17 +110,26 @@ static int af9015_rw_udev(struct usb_device *udev, struct req_t *req)
 		goto error_unlock;
 	}
 
+	/* buffer overflow check */
+	if ((write && (req->data_len > BUF_LEN - REQ_HDR_LEN)) ||
+		(!write && (req->data_len > BUF_LEN - ACK_HDR_LEN))) {
+		err("too much data; cmd:%d len:%d", req->cmd, req->data_len);
+		ret = -EINVAL;
+		goto error_unlock;
+	}
+
 	/* write requested */
 	if (write) {
-		memcpy(&buf[8], req->data, req->data_len);
+		memcpy(&buf[REQ_HDR_LEN], req->data, req->data_len);
 		msg_len += req->data_len;
 	}
+
 	deb_xfer(">>> ");
 	debug_dump(buf, msg_len, deb_xfer);
 
 	/* send req */
 	ret = usb_bulk_msg(udev, usb_sndbulkpipe(udev, 0x02), buf, msg_len,
-	&act_len, AF9015_USB_TIMEOUT);
+		&act_len, AF9015_USB_TIMEOUT);
 	if (ret)
 		err("bulk message failed:%d (%d/%d)", ret, msg_len, act_len);
 	else
@@ -130,10 +142,14 @@ static int af9015_rw_udev(struct usb_device *udev, struct req_t *req)
 	if (req->cmd == DOWNLOAD_FIRMWARE || req->cmd == RECONNECT_USB)
 		goto exit_unlock;
 
-	/* receive ack and data if read req */
-	msg_len = 1 + 1 + req->data_len;  /* seq + status + data len */
+	/* write receives seq + status = 2 bytes
+	   read receives seq + status + data = 2 + N bytes */
+	msg_len = ACK_HDR_LEN;
+	if (!write)
+		msg_len += req->data_len;
+
 	ret = usb_bulk_msg(udev, usb_rcvbulkpipe(udev, 0x81), buf, msg_len,
-			   &act_len, AF9015_USB_TIMEOUT);
+		&act_len, AF9015_USB_TIMEOUT);
 	if (ret) {
 		err("recv bulk message failed:%d", ret);
 		ret = -1;
@@ -159,7 +175,7 @@ static int af9015_rw_udev(struct usb_device *udev, struct req_t *req)
 
 	/* read request, copy returned data to return buf */
 	if (!write)
-		memcpy(req->data, &buf[2], req->data_len);
+		memcpy(req->data, &buf[ACK_HDR_LEN], req->data_len);
 
 error_unlock:
 exit_unlock:
@@ -372,12 +388,14 @@ static int af9015_init_endpoint(struct dvb_usb_device *d)
 	u8  packet_size;
 	deb_info("%s: USB speed:%d\n", __func__, d->udev->speed);
 
+	/* Windows driver uses packet count 21 for USB1.1 and 348 for USB2.0.
+	   We use smaller - about 1/4 from the original, 5 and 87. */
 #define TS_PACKET_SIZE            188
 
-#define TS_USB20_PACKET_COUNT     348
+#define TS_USB20_PACKET_COUNT      87
 #define TS_USB20_FRAME_SIZE       (TS_PACKET_SIZE*TS_USB20_PACKET_COUNT)
 
-#define TS_USB11_PACKET_COUNT      21
+#define TS_USB11_PACKET_COUNT       5
 #define TS_USB11_FRAME_SIZE       (TS_PACKET_SIZE*TS_USB11_PACKET_COUNT)
 
 #define TS_USB20_MAX_PACKET_SIZE  512
@@ -871,13 +889,13 @@ static int af9015_read_config(struct usb_device *udev)
 		/* USB1.1 set smaller buffersize and disable 2nd adapter */
 		if (udev->speed == USB_SPEED_FULL) {
 			af9015_properties[i].adapter[0].stream.u.bulk.buffersize
-				= TS_USB11_MAX_PACKET_SIZE;
+				= TS_USB11_FRAME_SIZE;
 			/* disable 2nd adapter because we don't have
 			   PID-filters */
 			af9015_config.dual_mode = 0;
 		} else {
 			af9015_properties[i].adapter[0].stream.u.bulk.buffersize
-				= TS_USB20_MAX_PACKET_SIZE;
+				= TS_USB20_FRAME_SIZE;
 		}
 	}
 
@@ -1313,7 +1331,7 @@ static struct dvb_usb_device_properties af9015_properties[] = {
 					.u = {
 						.bulk = {
 							.buffersize =
-						TS_USB20_MAX_PACKET_SIZE,
+						TS_USB20_FRAME_SIZE,
 						}
 					}
 				},
@@ -1419,7 +1437,7 @@ static struct dvb_usb_device_properties af9015_properties[] = {
 					.u = {
 						.bulk = {
 							.buffersize =
-						TS_USB20_MAX_PACKET_SIZE,
+						TS_USB20_FRAME_SIZE,
 						}
 					}
 				},
@@ -1525,7 +1543,7 @@ static struct dvb_usb_device_properties af9015_properties[] = {
 					.u = {
 						.bulk = {
 							.buffersize =
-						TS_USB20_MAX_PACKET_SIZE,
+						TS_USB20_FRAME_SIZE,
 						}
 					}
 				},
diff --git a/linux/drivers/media/dvb/dvb-usb/dib0700_devices.c b/linux/drivers/media/dvb/dvb-usb/dib0700_devices.c
index d4da73e7f..5198167a9 100644
--- a/linux/drivers/media/dvb/dvb-usb/dib0700_devices.c
+++ b/linux/drivers/media/dvb/dvb-usb/dib0700_devices.c
@@ -4,13 +4,14 @@
  *	under the terms of the GNU General Public License as published by the Free
  *	Software Foundation, version 2.
  *
- *  Copyright (C) 2005-7 DiBcom, SA
+ *  Copyright (C) 2005-9 DiBcom, SA et al
  */
 #include "dib0700.h"
 
 #include "dib3000mc.h"
 #include "dib7000m.h"
 #include "dib7000p.h"
+#include "dib8000.h"
 #include "mt2060.h"
 #include "mt2266.h"
 #include "tuner-xc2028.h"
@@ -1098,11 +1099,13 @@ static struct dibx000_agc_config dib7070_agc_config = {
 
 static int dib7070_tuner_reset(struct dvb_frontend *fe, int onoff)
 {
+	deb_info("reset: %d", onoff);
 	return dib7000p_set_gpio(fe, 8, 0, !onoff);
 }
 
 static int dib7070_tuner_sleep(struct dvb_frontend *fe, int onoff)
 {
+	deb_info("sleep: %d", onoff);
 	return dib7000p_set_gpio(fe, 9, 0, onoff);
 }
 
@@ -1112,16 +1115,26 @@ static struct dib0070_config dib7070p_dib0070_config[2] = {
 		.reset = dib7070_tuner_reset,
 		.sleep = dib7070_tuner_sleep,
 		.clock_khz = 12000,
-		.clock_pad_drive = 4
+		.clock_pad_drive = 4,
+		.charge_pump = 2,
 	}, {
 		.i2c_address = DEFAULT_DIB0070_I2C_ADDRESS,
 		.reset = dib7070_tuner_reset,
 		.sleep = dib7070_tuner_sleep,
 		.clock_khz = 12000,
-
+		.charge_pump = 2,
 	}
 };
 
+static struct dib0070_config dib7770p_dib0070_config = {
+	 .i2c_address = DEFAULT_DIB0070_I2C_ADDRESS,
+	 .reset = dib7070_tuner_reset,
+	 .sleep = dib7070_tuner_sleep,
+	 .clock_khz = 12000,
+	 .clock_pad_drive = 0,
+	 .flip_chip = 1,
+};
+
 static int dib7070_set_param_override(struct dvb_frontend *fe, struct dvb_frontend_parameters *fep)
 {
 	struct dvb_usb_adapter *adap = fe->dvb->priv;
@@ -1139,6 +1152,45 @@ static int dib7070_set_param_override(struct dvb_frontend *fe, struct dvb_fronte
 	return state->set_param_save(fe, fep);
 }
 
+static int dib7770_set_param_override(struct dvb_frontend *fe,
+		struct dvb_frontend_parameters *fep)
+{
+	 struct dvb_usb_adapter *adap = fe->dvb->priv;
+	 struct dib0700_adapter_state *state = adap->priv;
+
+	 u16 offset;
+	 u8 band = BAND_OF_FREQUENCY(fep->frequency/1000);
+	 switch (band) {
+	 case BAND_VHF:
+		  dib7000p_set_gpio(fe, 0, 0, 1);
+		  offset = 850;
+		  break;
+	 case BAND_UHF:
+	 default:
+		  dib7000p_set_gpio(fe, 0, 0, 0);
+		  offset = 250;
+		  break;
+	 }
+	 deb_info("WBD for DiB7000P: %d\n", offset + dib0070_wbd_offset(fe));
+	 dib7000p_set_wbd_ref(fe, offset + dib0070_wbd_offset(fe));
+	 return state->set_param_save(fe, fep);
+}
+
+static int dib7770p_tuner_attach(struct dvb_usb_adapter *adap)
+{
+	 struct dib0700_adapter_state *st = adap->priv;
+	 struct i2c_adapter *tun_i2c = dib7000p_get_i2c_master(adap->fe,
+			 DIBX000_I2C_INTERFACE_TUNER, 1);
+
+	 if (dvb_attach(dib0070_attach, adap->fe, tun_i2c,
+				 &dib7770p_dib0070_config) == NULL)
+		 return -ENODEV;
+
+	 st->set_param_save = adap->fe->ops.tuner_ops.set_params;
+	 adap->fe->ops.tuner_ops.set_params = dib7770_set_param_override;
+	 return 0;
+}
+
 static int dib7070p_tuner_attach(struct dvb_usb_adapter *adap)
 {
 	struct dib0700_adapter_state *st = adap->priv;
@@ -1217,6 +1269,306 @@ static int stk7070p_frontend_attach(struct dvb_usb_adapter *adap)
 	return adap->fe == NULL ? -ENODEV : 0;
 }
 
+/* DIB807x generic */
+static struct dibx000_agc_config dib807x_agc_config[2] = {
+	{
+		BAND_VHF,
+		/* P_agc_use_sd_mod1=0, P_agc_use_sd_mod2=0,
+		 * P_agc_freq_pwm_div=1, P_agc_inv_pwm1=0,
+		 * P_agc_inv_pwm2=0,P_agc_inh_dc_rv_est=0,
+		 * P_agc_time_est=3, P_agc_freeze=0, P_agc_nb_est=5,
+		 * P_agc_write=0 */
+		(0 << 15) | (0 << 14) | (7 << 11) | (0 << 10) | (0 << 9) |
+			(0 << 8) | (3 << 5) | (0 << 4) | (5 << 1) |
+			(0 << 0), /* setup*/
+
+		600, /* inv_gain*/
+		10,  /* time_stabiliz*/
+
+		0,  /* alpha_level*/
+		118,  /* thlock*/
+
+		0,     /* wbd_inv*/
+		3530,  /* wbd_ref*/
+		1,     /* wbd_sel*/
+		5,     /* wbd_alpha*/
+
+		65535,  /* agc1_max*/
+		0,  /* agc1_min*/
+
+		65535,  /* agc2_max*/
+		0,      /* agc2_min*/
+
+		0,      /* agc1_pt1*/
+		40,     /* agc1_pt2*/
+		183,    /* agc1_pt3*/
+		206,    /* agc1_slope1*/
+		255,    /* agc1_slope2*/
+		72,     /* agc2_pt1*/
+		152,    /* agc2_pt2*/
+		88,     /* agc2_slope1*/
+		90,     /* agc2_slope2*/
+
+		17,  /* alpha_mant*/
+		27,  /* alpha_exp*/
+		23,  /* beta_mant*/
+		51,  /* beta_exp*/
+
+		0,  /* perform_agc_softsplit*/
+	}, {
+		BAND_UHF,
+		/* P_agc_use_sd_mod1=0, P_agc_use_sd_mod2=0,
+		 * P_agc_freq_pwm_div=1, P_agc_inv_pwm1=0,
+		 * P_agc_inv_pwm2=0, P_agc_inh_dc_rv_est=0,
+		 * P_agc_time_est=3, P_agc_freeze=0, P_agc_nb_est=5,
+		 * P_agc_write=0 */
+		(0 << 15) | (0 << 14) | (1 << 11) | (0 << 10) | (0 << 9) |
+			(0 << 8) | (3 << 5) | (0 << 4) | (5 << 1) |
+			(0 << 0), /* setup */
+
+		600, /* inv_gain*/
+		10,  /* time_stabiliz*/
+
+		0,  /* alpha_level*/
+		118,  /* thlock*/
+
+		0,     /* wbd_inv*/
+		3530,  /* wbd_ref*/
+		1,     /* wbd_sel*/
+		5,     /* wbd_alpha*/
+
+		65535,  /* agc1_max*/
+		0,  /* agc1_min*/
+
+		65535,  /* agc2_max*/
+		0,      /* agc2_min*/
+
+		0,      /* agc1_pt1*/
+		40,     /* agc1_pt2*/
+		183,    /* agc1_pt3*/
+		206,    /* agc1_slope1*/
+		255,    /* agc1_slope2*/
+		72,     /* agc2_pt1*/
+		152,    /* agc2_pt2*/
+		88,     /* agc2_slope1*/
+		90,     /* agc2_slope2*/
+
+		17,  /* alpha_mant*/
+		27,  /* alpha_exp*/
+		23,  /* beta_mant*/
+		51,  /* beta_exp*/
+
+		0,  /* perform_agc_softsplit*/
+	}
+};
+
+static struct dibx000_bandwidth_config dib807x_bw_config_12_mhz = {
+	60000, 15000, /* internal, sampling*/
+	1, 20, 3, 1, 0, /* pll_cfg: prediv, ratio, range, reset, bypass*/
+	0, 0, 1, 1, 2, /* misc: refdiv, bypclk_div, IO_CLK_en_core,
+			  ADClkSrc, modulo */
+	(3 << 14) | (1 << 12) | (599 << 0), /* sad_cfg: refsel, sel, freq_15k*/
+	(0 << 25) | 0, /* ifreq = 0.000000 MHz*/
+	18179755, /* timf*/
+	12000000, /* xtal_hz*/
+};
+
+static struct dib8000_config dib807x_dib8000_config[2] = {
+	{
+		.output_mpeg2_in_188_bytes = 1,
+
+		.agc_config_count = 2,
+		.agc = dib807x_agc_config,
+		.pll = &dib807x_bw_config_12_mhz,
+		.tuner_is_baseband = 1,
+
+		.gpio_dir = DIB8000_GPIO_DEFAULT_DIRECTIONS,
+		.gpio_val = DIB8000_GPIO_DEFAULT_VALUES,
+		.gpio_pwm_pos = DIB8000_GPIO_DEFAULT_PWM_POS,
+
+		.hostbus_diversity = 1,
+		.div_cfg = 1,
+		.agc_control = &dib0070_ctrl_agc_filter,
+		.output_mode = OUTMODE_MPEG2_FIFO,
+		.drives = 0x2d98,
+	}, {
+		.output_mpeg2_in_188_bytes = 1,
+
+		.agc_config_count = 2,
+		.agc = dib807x_agc_config,
+		.pll = &dib807x_bw_config_12_mhz,
+		.tuner_is_baseband = 1,
+
+		.gpio_dir = DIB8000_GPIO_DEFAULT_DIRECTIONS,
+		.gpio_val = DIB8000_GPIO_DEFAULT_VALUES,
+		.gpio_pwm_pos = DIB8000_GPIO_DEFAULT_PWM_POS,
+
+		.hostbus_diversity = 1,
+		.agc_control = &dib0070_ctrl_agc_filter,
+		.output_mode = OUTMODE_MPEG2_FIFO,
+		.drives = 0x2d98,
+	}
+};
+
+static int dib807x_tuner_reset(struct dvb_frontend *fe, int onoff)
+{
+	return dib8000_set_gpio(fe, 5, 0, !onoff);
+}
+
+static int dib807x_tuner_sleep(struct dvb_frontend *fe, int onoff)
+{
+	return dib8000_set_gpio(fe, 0, 0, onoff);
+}
+
+static const struct dib0070_wbd_gain_cfg dib8070_wbd_gain_cfg[] = {
+    { 240,      7},
+    { 0xffff,   6},
+};
+
+static struct dib0070_config dib807x_dib0070_config[2] = {
+	{
+		.i2c_address = DEFAULT_DIB0070_I2C_ADDRESS,
+		.reset = dib807x_tuner_reset,
+		.sleep = dib807x_tuner_sleep,
+		.clock_khz = 12000,
+		.clock_pad_drive = 4,
+		.vga_filter = 1,
+		.force_crystal_mode = 1,
+		.enable_third_order_filter = 1,
+		.charge_pump = 0,
+		.wbd_gain = dib8070_wbd_gain_cfg,
+		.osc_buffer_state = 0,
+		.freq_offset_khz_uhf = -100,
+		.freq_offset_khz_vhf = -100,
+	}, {
+		.i2c_address = DEFAULT_DIB0070_I2C_ADDRESS,
+		.reset = dib807x_tuner_reset,
+		.sleep = dib807x_tuner_sleep,
+		.clock_khz = 12000,
+		.clock_pad_drive = 2,
+		.vga_filter = 1,
+		.force_crystal_mode = 1,
+		.enable_third_order_filter = 1,
+		.charge_pump = 0,
+		.wbd_gain = dib8070_wbd_gain_cfg,
+		.osc_buffer_state = 0,
+		.freq_offset_khz_uhf = -25,
+		.freq_offset_khz_vhf = -25,
+	}
+};
+
+static int dib807x_set_param_override(struct dvb_frontend *fe,
+		struct dvb_frontend_parameters *fep)
+{
+	struct dvb_usb_adapter *adap = fe->dvb->priv;
+	struct dib0700_adapter_state *state = adap->priv;
+
+	u16 offset = dib0070_wbd_offset(fe);
+	u8 band = BAND_OF_FREQUENCY(fep->frequency/1000);
+	switch (band) {
+	case BAND_VHF:
+		offset += 750;
+		break;
+	case BAND_UHF:  /* fall-thru wanted */
+	default:
+		offset += 250; break;
+	}
+	deb_info("WBD for DiB8000: %d\n", offset);
+	dib8000_set_wbd_ref(fe, offset);
+
+	return state->set_param_save(fe, fep);
+}
+
+static int dib807x_tuner_attach(struct dvb_usb_adapter *adap)
+{
+	struct dib0700_adapter_state *st = adap->priv;
+	struct i2c_adapter *tun_i2c = dib8000_get_i2c_master(adap->fe,
+			DIBX000_I2C_INTERFACE_TUNER, 1);
+
+	if (adap->id == 0) {
+		if (dvb_attach(dib0070_attach, adap->fe, tun_i2c,
+				&dib807x_dib0070_config[0]) == NULL)
+			return -ENODEV;
+	} else {
+		if (dvb_attach(dib0070_attach, adap->fe, tun_i2c,
+				&dib807x_dib0070_config[1]) == NULL)
+			return -ENODEV;
+	}
+
+	st->set_param_save = adap->fe->ops.tuner_ops.set_params;
+	adap->fe->ops.tuner_ops.set_params = dib807x_set_param_override;
+	return 0;
+}
+
+
+/* STK807x */
+static int stk807x_frontend_attach(struct dvb_usb_adapter *adap)
+{
+	dib0700_set_gpio(adap->dev, GPIO6, GPIO_OUT, 1);
+	msleep(10);
+	dib0700_set_gpio(adap->dev, GPIO9, GPIO_OUT, 1);
+	dib0700_set_gpio(adap->dev, GPIO4, GPIO_OUT, 1);
+	dib0700_set_gpio(adap->dev, GPIO7, GPIO_OUT, 1);
+
+	dib0700_set_gpio(adap->dev, GPIO10, GPIO_OUT, 0);
+
+	dib0700_ctrl_clock(adap->dev, 72, 1);
+
+	msleep(10);
+	dib0700_set_gpio(adap->dev, GPIO10, GPIO_OUT, 1);
+	msleep(10);
+	dib0700_set_gpio(adap->dev, GPIO0, GPIO_OUT, 1);
+
+	dib8000_i2c_enumeration(&adap->dev->i2c_adap, 1, 18,
+				0x80);
+
+	adap->fe = dvb_attach(dib8000_attach, &adap->dev->i2c_adap, 0x80,
+			      &dib807x_dib8000_config[0]);
+
+	return adap->fe == NULL ?  -ENODEV : 0;
+}
+
+/* STK807xPVR */
+static int stk807xpvr_frontend_attach0(struct dvb_usb_adapter *adap)
+{
+	dib0700_set_gpio(adap->dev, GPIO6, GPIO_OUT, 0);
+	msleep(30);
+	dib0700_set_gpio(adap->dev, GPIO6, GPIO_OUT, 1);
+	msleep(500);
+	dib0700_set_gpio(adap->dev, GPIO9, GPIO_OUT, 1);
+	dib0700_set_gpio(adap->dev, GPIO4, GPIO_OUT, 1);
+	dib0700_set_gpio(adap->dev, GPIO7, GPIO_OUT, 1);
+
+	dib0700_set_gpio(adap->dev, GPIO10, GPIO_OUT, 0);
+
+	dib0700_ctrl_clock(adap->dev, 72, 1);
+
+	msleep(10);
+	dib0700_set_gpio(adap->dev, GPIO10, GPIO_OUT, 1);
+	msleep(10);
+	dib0700_set_gpio(adap->dev, GPIO0, GPIO_OUT, 1);
+
+	/* initialize IC 0 */
+	dib8000_i2c_enumeration(&adap->dev->i2c_adap, 1, 0x12, 0x80);
+
+	adap->fe = dvb_attach(dib8000_attach, &adap->dev->i2c_adap, 0x80,
+			      &dib807x_dib8000_config[0]);
+
+	return adap->fe == NULL ? -ENODEV : 0;
+}
+
+static int stk807xpvr_frontend_attach1(struct dvb_usb_adapter *adap)
+{
+	/* initialize IC 1 */
+	dib8000_i2c_enumeration(&adap->dev->i2c_adap, 1, 0x22, 0x82);
+
+	adap->fe = dvb_attach(dib8000_attach, &adap->dev->i2c_adap, 0x82,
+			      &dib807x_dib8000_config[1]);
+
+	return adap->fe == NULL ? -ENODEV : 0;
+}
+
+
 /* STK7070PD */
 static struct dib7000p_config stk7070pd_dib7000p_config[2] = {
 	{
@@ -1504,7 +1856,15 @@ struct usb_device_id dib0700_usb_id_table[] = {
 	{ USB_DEVICE(USB_VID_TERRATEC,	USB_PID_TERRATEC_T3) },
 	{ USB_DEVICE(USB_VID_TERRATEC,	USB_PID_TERRATEC_T5) },
 	{ USB_DEVICE(USB_VID_YUAN,      USB_PID_YUAN_STK7700D) },
-	{ USB_DEVICE(USB_VID_YUAN,	USB_PID_YUAN_STK7700D_2) },
+/* 55 */{ USB_DEVICE(USB_VID_YUAN,	USB_PID_YUAN_STK7700D_2) },
+	{ USB_DEVICE(USB_VID_PINNACLE,	USB_PID_PINNACLE_PCTV73A) },
+	{ USB_DEVICE(USB_VID_PINNACLE,	USB_PID_PINNACLE_PCTV73ESE) },
+	{ USB_DEVICE(USB_VID_PINNACLE,	USB_PID_PINNACLE_PCTV282E) },
+	{ USB_DEVICE(USB_VID_DIBCOM,	USB_PID_DIBCOM_STK7770P) },
+/* 60 */{ USB_DEVICE(USB_VID_TERRATEC,	USB_PID_TERRATEC_CINERGY_T_XXS_2) },
+	{ USB_DEVICE(USB_VID_DIBCOM,    USB_PID_DIBCOM_STK807XPVR) },
+	{ USB_DEVICE(USB_VID_DIBCOM,    USB_PID_DIBCOM_STK807XP) },
+	{ USB_DEVICE(USB_VID_PIXELVIEW, USB_PID_PIXELVIEW_SBTVD) },
 	{ 0 }		/* Terminating entry */
 };
 MODULE_DEVICE_TABLE(usb, dib0700_usb_id_table);
@@ -1569,7 +1929,7 @@ struct dvb_usb_device_properties dib0700_devices[] = {
 				{ NULL },
 			},
 			{   "Leadtek Winfast DTV Dongle (STK7700P based)",
-				{ &dib0700_usb_id_table[8], &dib0700_usb_id_table[34] },
+				{ &dib0700_usb_id_table[8] },
 				{ NULL },
 			},
 			{   "AVerMedia AVerTV DVB-T Express",
@@ -1768,6 +2128,41 @@ struct dvb_usb_device_properties dib0700_devices[] = {
 
 	}, { DIB0700_DEFAULT_DEVICE_PROPERTIES,
 
+		.num_adapters = 1,
+		.adapter = {
+			{
+				.frontend_attach  = stk7070p_frontend_attach,
+				.tuner_attach     = dib7070p_tuner_attach,
+
+				DIB0700_DEFAULT_STREAMING_CONFIG(0x02),
+
+				.size_of_priv     = sizeof(struct dib0700_adapter_state),
+			},
+		},
+
+		.num_device_descs = 3,
+		.devices = {
+			{   "Pinnacle PCTV 73A",
+				{ &dib0700_usb_id_table[56], NULL },
+				{ NULL },
+			},
+			{   "Pinnacle PCTV 73e SE",
+				{ &dib0700_usb_id_table[57], NULL },
+				{ NULL },
+			},
+			{   "Pinnacle PCTV 282e",
+				{ &dib0700_usb_id_table[58], NULL },
+				{ NULL },
+			},
+		},
+
+		.rc_interval      = DEFAULT_RC_INTERVAL,
+		.rc_key_map       = dib0700_rc_keys,
+		.rc_key_map_size  = ARRAY_SIZE(dib0700_rc_keys),
+		.rc_query         = dib0700_rc_query
+
+	}, { DIB0700_DEFAULT_DEVICE_PROPERTIES,
+
 		.num_adapters = 2,
 		.adapter = {
 			{
@@ -1931,6 +2326,102 @@ struct dvb_usb_device_properties dib0700_devices[] = {
 				{ NULL },
 			},
 		},
+	}, { DIB0700_DEFAULT_DEVICE_PROPERTIES,
+
+		.num_adapters = 1,
+		.adapter = {
+			{
+				.frontend_attach  = stk7070p_frontend_attach,
+				.tuner_attach     = dib7770p_tuner_attach,
+
+				DIB0700_DEFAULT_STREAMING_CONFIG(0x02),
+
+				.size_of_priv =
+					sizeof(struct dib0700_adapter_state),
+			},
+		},
+
+		.num_device_descs = 2,
+		.devices = {
+			{   "DiBcom STK7770P reference design",
+				{ &dib0700_usb_id_table[59], NULL },
+				{ NULL },
+			},
+			{   "Terratec Cinergy T USB XXS (HD)",
+				{ &dib0700_usb_id_table[34], &dib0700_usb_id_table[60] },
+				{ NULL },
+			},
+		},
+		.rc_interval      = DEFAULT_RC_INTERVAL,
+		.rc_key_map       = dib0700_rc_keys,
+		.rc_key_map_size  = ARRAY_SIZE(dib0700_rc_keys),
+		.rc_query         = dib0700_rc_query
+	}, { DIB0700_DEFAULT_DEVICE_PROPERTIES,
+		.num_adapters = 1,
+		.adapter = {
+			{
+				.frontend_attach  = stk807x_frontend_attach,
+				.tuner_attach     = dib807x_tuner_attach,
+
+				DIB0700_DEFAULT_STREAMING_CONFIG(0x02),
+
+				.size_of_priv =
+					sizeof(struct dib0700_adapter_state),
+			},
+		},
+
+		.num_device_descs = 2,
+		.devices = {
+			{   "DiBcom STK807xP reference design",
+				{ &dib0700_usb_id_table[62], NULL },
+				{ NULL },
+			},
+			{   "Prolink Pixelview SBTVD",
+				{ &dib0700_usb_id_table[63], NULL },
+				{ NULL },
+			},
+		},
+
+		.rc_interval      = DEFAULT_RC_INTERVAL,
+		.rc_key_map       = dib0700_rc_keys,
+		.rc_key_map_size  = ARRAY_SIZE(dib0700_rc_keys),
+		.rc_query         = dib0700_rc_query
+
+	}, { DIB0700_DEFAULT_DEVICE_PROPERTIES,
+		.num_adapters = 2,
+		.adapter = {
+			{
+				.frontend_attach  = stk807xpvr_frontend_attach0,
+				.tuner_attach     = dib807x_tuner_attach,
+
+				DIB0700_DEFAULT_STREAMING_CONFIG(0x02),
+
+				.size_of_priv =
+					sizeof(struct dib0700_adapter_state),
+			},
+			{
+				.frontend_attach  = stk807xpvr_frontend_attach1,
+				.tuner_attach     = dib807x_tuner_attach,
+
+				DIB0700_DEFAULT_STREAMING_CONFIG(0x03),
+
+				.size_of_priv =
+					sizeof(struct dib0700_adapter_state),
+			},
+		},
+
+		.num_device_descs = 1,
+		.devices = {
+			{   "DiBcom STK807xPVR reference design",
+				{ &dib0700_usb_id_table[61], NULL },
+				{ NULL },
+			},
+		},
+
+		.rc_interval      = DEFAULT_RC_INTERVAL,
+		.rc_key_map       = dib0700_rc_keys,
+		.rc_key_map_size  = ARRAY_SIZE(dib0700_rc_keys),
+		.rc_query         = dib0700_rc_query
 	},
 };
 
diff --git a/linux/drivers/media/dvb/dvb-usb/dvb-usb-ids.h b/linux/drivers/media/dvb/dvb-usb/dvb-usb-ids.h
index 185a5069b..2d51e3c28 100644
--- a/linux/drivers/media/dvb/dvb-usb/dvb-usb-ids.h
+++ b/linux/drivers/media/dvb/dvb-usb/dvb-usb-ids.h
@@ -46,6 +46,7 @@
 #define USB_VID_MSI_2				0x1462
 #define USB_VID_OPERA1				0x695c
 #define USB_VID_PINNACLE			0x2304
+#define USB_VID_PIXELVIEW			0x1554
 #define USB_VID_TECHNOTREND			0x0b48
 #define USB_VID_TERRATEC			0x0ccd
 #define USB_VID_TELESTAR			0x10b9
@@ -95,7 +96,10 @@
 #define USB_PID_DIBCOM_STK7700_U7000			0x7001
 #define USB_PID_DIBCOM_STK7070P				0x1ebc
 #define USB_PID_DIBCOM_STK7070PD			0x1ebe
+#define USB_PID_DIBCOM_STK807XP				0x1f90
+#define USB_PID_DIBCOM_STK807XPVR			0x1f98
 #define USB_PID_DIBCOM_ANCHOR_2135_COLD			0x2131
+#define USB_PID_DIBCOM_STK7770P				0x1e80
 #define USB_PID_DPOSH_M9206_COLD			0x9206
 #define USB_PID_DPOSH_M9206_WARM			0xa090
 #define USB_PID_UNIWILL_STK7700P			0x6003
@@ -184,6 +188,7 @@
 #define USB_PID_TERRATEC_CINERGY_HT_EXPRESS		0x0060
 #define USB_PID_TERRATEC_CINERGY_T_EXPRESS		0x0062
 #define USB_PID_TERRATEC_CINERGY_T_XXS			0x0078
+#define USB_PID_TERRATEC_CINERGY_T_XXS_2		0x00ab
 #define USB_PID_TERRATEC_T3				0x10a0
 #define USB_PID_TERRATEC_T5				0x10a1
 #define USB_PID_PINNACLE_EXPRESSCARD_320CX		0x022e
@@ -195,6 +200,10 @@
 #define USB_PID_PINNACLE_PCTV73E			0x0237
 #define USB_PID_PINNACLE_PCTV801E			0x023a
 #define USB_PID_PINNACLE_PCTV801E_SE			0x023b
+#define USB_PID_PINNACLE_PCTV73A			0x0243
+#define USB_PID_PINNACLE_PCTV73ESE			0x0245
+#define USB_PID_PINNACLE_PCTV282E			0x0248
+#define USB_PID_PIXELVIEW_SBTVD				0x5010
 #define USB_PID_PCTV_200E				0x020e
 #define USB_PID_PCTV_400E				0x020f
 #define USB_PID_PCTV_450E				0x0222