DVB support for the pcHDTV HD2000 card

submitted by Rusty Scott

7 files changed, 704 insertions, 1 deletions

diff --git a/linux/drivers/media/dvb/bt8xx/Kconfig b/linux/drivers/media/dvb/bt8xx/Kconfig
index bc7b48ed1..726a60515 100644
--- a/linux/drivers/media/dvb/bt8xx/Kconfig
+++ b/linux/drivers/media/dvb/bt8xx/Kconfig
@@ -5,9 +5,11 @@ config DVB_BT8XX
 	select DVB_SP887X
 	select DVB_NXT6000
 	select DVB_CX24110
+	select DVB_OR51211
 	help
 	  Support for PCI cards based on the Bt8xx PCI bridge. Examples are
-	  the Nebula cards, the Pinnacle PCTV cards and Twinhan DST cards.
+	  the Nebula cards, the Pinnacle PCTV cards, the Twinhan DST cards and 
+	  pcHDTV HD2000 cards.
 
           Since these cards have no MPEG decoder onboard, they transmit
 	  only compressed MPEG data over the PCI bus, so you need
diff --git a/linux/drivers/media/dvb/bt8xx/dvb-bt8xx.c b/linux/drivers/media/dvb/bt8xx/dvb-bt8xx.c
index 3da64f580..ca15bdd42 100644
--- a/linux/drivers/media/dvb/bt8xx/dvb-bt8xx.c
+++ b/linux/drivers/media/dvb/bt8xx/dvb-bt8xx.c
@@ -369,6 +369,20 @@ static struct dst_config dst_config = {
 };
 
 
+static int or51211_request_firmware(struct dvb_frontend* fe, const struct firmware **fw, char* name)
+{
+	struct dvb_bt8xx_card* bt = (struct dvb_bt8xx_card*) fe->dvb->priv;
+
+	return request_firmware(fw, name, &bt->bt->dev->dev);
+}
+
+static struct or51211_config or51211_config = {
+
+	.demod_address = 0x15,
+	.request_firmware = or51211_request_firmware,
+};
+
+
 static int vp3021_alps_tded4_pll_set(struct dvb_frontend* fe, struct dvb_frontend_parameters* params)
 {
 	struct dvb_bt8xx_card *card = (struct dvb_bt8xx_card *) fe->dvb->priv;
@@ -458,6 +472,13 @@ static void frontend_init(struct dvb_bt8xx_card *card, u32 type)
 			break;
 		}
 		break;
+
+	case BTTV_PC_HDTV:
+		card->fe = or51211_attach(&or51211_config, card->i2c_adapter, card->bt);
+		if (card->fe != NULL) {
+			break;
+		}
+		break;
 	}
 
 	if (card->fe == NULL) {
@@ -637,6 +658,12 @@ static int dvb_bt8xx_probe(struct device *dev)
 		 * RISC+FIFO ENABLE */
 		break;
 
+	case BTTV_PC_HDTV:
+		card->gpio_mode = 0x0100EC7B;
+		card->op_sync_orin = 0;
+		card->irq_err_ignore = 0;
+		break;
+
 	default:
 		printk(KERN_WARNING "dvb_bt8xx: Unknown bttv card type: %d.\n",
 				sub->core->type);
diff --git a/linux/drivers/media/dvb/bt8xx/dvb-bt8xx.h b/linux/drivers/media/dvb/bt8xx/dvb-bt8xx.h
index f9bf4e2e4..80ef189f9 100644
--- a/linux/drivers/media/dvb/bt8xx/dvb-bt8xx.h
+++ b/linux/drivers/media/dvb/bt8xx/dvb-bt8xx.h
@@ -34,6 +34,7 @@
 #include "dst.h"
 #include "nxt6000.h"
 #include "cx24110.h"
+#include "or51211.h"
 
 struct dvb_bt8xx_card {
 	struct semaphore lock;
diff --git a/linux/drivers/media/dvb/frontends/Kconfig b/linux/drivers/media/dvb/frontends/Kconfig
index de132d905..03100488f 100644
--- a/linux/drivers/media/dvb/frontends/Kconfig
+++ b/linux/drivers/media/dvb/frontends/Kconfig
@@ -158,4 +158,11 @@ config DVB_NXT2002
 	help
 	  An ATSC 8VSB tuner module. Say Y when you want to support this frontend.
 
+config DVB_OR51211
+	tristate "or51211 based (pcHDTV HD2000 card)"
+	depends on DVB_CORE
+	select FW_LOADER
+	help
+	  An ATSC 8VSB tuner module. Say Y when you want to support this frontend.
+
 endmenu
diff --git a/linux/drivers/media/dvb/frontends/Makefile b/linux/drivers/media/dvb/frontends/Makefile
index 100623232..d5cc8d3be 100644
--- a/linux/drivers/media/dvb/frontends/Makefile
+++ b/linux/drivers/media/dvb/frontends/Makefile
@@ -26,4 +26,5 @@ obj-$(CONFIG_DVB_TDA80XX) += tda80xx.o
 obj-$(CONFIG_DVB_TDA10021) += tda10021.o
 obj-$(CONFIG_DVB_STV0297) += stv0297.o
 obj-$(CONFIG_DVB_NXT2002) += nxt2002.o
+obj-$(CONFIG_DVB_OR51211) += or51211.o
 
diff --git a/linux/drivers/media/dvb/frontends/or51211.c b/linux/drivers/media/dvb/frontends/or51211.c
new file mode 100644
index 000000000..0dea1c4dc
--- /dev/null
+++ b/linux/drivers/media/dvb/frontends/or51211.c
@@ -0,0 +1,622 @@
+/*
+ *    Support for OR51211 (pcHDTV HD-2000) - VSB
+ *
+ *    Copyright (C) 2005 Kirk Lapray <kirk_lapray@bigfoot.com>
+ *
+ *    Based on code from Jack Kelliher (kelliher@xmission.com)
+ *                           Copyright (C) 2002 & pcHDTV, inc.
+ *
+ *    This program is free software; you can redistribute it and/or modify
+ *    it under the terms of the GNU General Public License as published by
+ *    the Free Software Foundation; either version 2 of the License, or
+ *    (at your option) any later version.
+ *
+ *    This program is distributed in the hope that it will be useful,
+ *    but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *    MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *    GNU General Public License for more details.
+ *
+ *    You should have received a copy of the GNU General Public License
+ *    along with this program; if not, write to the Free Software
+ *    Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+ *
+*/
+
+/*
+ * This driver needs external firmware. Please use the command
+ * "<kerneldir>/Documentation/dvb/get_dvb_firmware or51211" to
+ * download/extract it, and then copy it to /usr/lib/hotplug/firmware.
+ */
+#define OR51211_DEFAULT_FIRMWARE "dvb-fe-or51211.fw"
+
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/moduleparam.h>
+#include <linux/device.h>
+#include <linux/firmware.h>
+#include <asm/byteorder.h>
+
+#include "dvb_frontend.h"
+#include "or51211.h"
+
+static int debug;
+#define dprintk(args...) \
+	do { \
+		if (debug) printk(KERN_DEBUG "or51211: " args); \
+	} while (0)
+
+static u8 run_buf[] = {0x7f,0x01};
+static u8 cmd_buf[] = {0x04,0x01,0x50,0x80,0x06}; // ATSC
+
+struct or51211_state {
+
+	struct i2c_adapter* i2c;
+	struct dvb_frontend_ops ops;
+    
+	/* Configuration settings */
+	const struct or51211_config* config;
+
+	struct dvb_frontend frontend;
+	struct bt878* bt;
+
+	/* Demodulator private data */
+	u8 initialized:1;
+
+	/* Tuner private data */
+	u32 current_frequency;
+};
+
+static int i2c_writebytes (struct or51211_state* state, u8 reg, u8 *buf, int len)
+{
+	int err;
+	struct i2c_msg msg;
+	msg.addr	= reg;
+	msg.flags 	= 0;
+	msg.len 	= len;
+	msg.buf 	= buf;
+
+	if ((err = i2c_transfer (state->i2c, &msg, 1)) != 1) {
+		printk(KERN_WARNING "or51211: i2c_writebytes error (addr %02x, err == %i)\n", reg, err);
+		return -EREMOTEIO;
+	}
+
+	return 0;
+}
+
+static u8 i2c_readbytes (struct or51211_state* state, u8 reg, u8* buf, int len)
+{
+	int err;
+	struct i2c_msg msg;
+	msg.addr 	= reg;
+	msg.flags 	= I2C_M_RD;
+	msg.len 	= len;
+	msg.buf 	= buf;
+
+	if ((err = i2c_transfer (state->i2c, &msg, 1)) != 1) {
+		printk(KERN_WARNING "or51211: i2c_readbytes error (addr %02x, err == %i)\n", reg, err);
+		return -EREMOTEIO;
+	}
+
+	return 0;
+}
+
+static int or51211_load_firmware (struct dvb_frontend* fe, const struct firmware *fw)
+{
+	struct or51211_state* state = (struct or51211_state*) fe->demodulator_priv;
+	u8 tudata[585];
+	int i;
+
+	dprintk("Firmware is %d bytes\n",fw->size);
+
+	/* Get eprom data */
+	tudata[0] = 17;
+	if(i2c_writebytes(state,0x50,tudata,1)) {
+		printk(KERN_WARNING "or51211: load_firmware error eprom addr\n");
+		return -1;
+	}
+	if(i2c_readbytes(state,0x50,&tudata[145],192)) {
+		printk(KERN_WARNING "or51211: load_firmware error eprom\n");
+		return -1;
+	}
+
+	/* Create firmware buffer */
+	for (i = 0; i < 145; i++) {
+	  tudata[i] = fw->data[i];
+	}
+	for (i = 0; i < 248; i++) {
+		tudata[i+337] = fw->data[145+i];
+	}
+
+	/* RESET DEVICE
+	 * reset is controled by GPIO-0 
+	 * when set to 0 causes reset and when to 1 for normal op 
+	 * must remain reset for 128 clock cycles on a 50Mhz clock
+	 * also PRM1 PRM2 & PRM4 are controled by GPIO-1,GPIO-2 & GPIO-4
+	 * We assume that the reset has be held low long enough or we 
+	 * have been reset by a power on.  When the driver is unloaded
+	 * reset set to 0 so if reloaded we have been reset.
+	 */
+	i = bttv_gpio_enable(state->bt->bttv_nr, 0x001F, 0x001F); /* reset & PRM1,2&4 are outputs */
+	if(i != 0) {
+		printk(KERN_WARNING "or51211: Init Error - Can't Reset DVR (%i)\n",i);
+	}
+	bttv_write_gpio(state->bt->bttv_nr, 0x001F, 0x0000);   /* Reset */
+	msleep(20); /* Reset for 20ms */
+	bttv_write_gpio(state->bt->bttv_nr, 0x0001F, 0x0001);   /* Now set for normal operation */
+	msleep(500); /* 500ms for operation to begin */
+
+	if(i2c_writebytes(state,state->config->demod_address,tudata,585)) {
+		printk(KERN_WARNING "or51211: load_firmware error 1\n");
+		return -1;
+	}
+	msleep(1); /* 1ms */
+
+	if(i2c_writebytes(state,state->config->demod_address,&fw->data[393],8125)) {
+		printk(KERN_WARNING "or51211: load_firmware error 2\n");
+		return -1;
+	}
+	msleep(1); /* 1ms */
+
+	if(i2c_writebytes(state,state->config->demod_address,run_buf,2)) {
+		printk(KERN_WARNING "or51211: load_firmware error 3\n");
+		return -1;
+	}
+
+	/* Wait at least 5 msec */
+	msleep(10); /* 10ms */
+	if(i2c_writebytes(state,state->config->demod_address,run_buf,2)) {
+		printk(KERN_WARNING "or51211: load_firmware error 4\n");
+		return -1;
+	}
+	msleep(10); /* 10ms */
+
+	printk("or51211: Done.\n");
+	return 0;
+};
+
+static int or51211_setmode(struct dvb_frontend* fe, int mode)
+{
+	struct or51211_state* state = (struct or51211_state*) fe->demodulator_priv;
+	u8 rec_buf[14];
+
+	bttv_write_gpio(state->bt->bttv_nr, 0x0002, mode);   /* Reset */
+	msleep(20); /* Reset for 20ms */
+
+	if(i2c_writebytes(state,state->config->demod_address,run_buf,2)) {
+		printk(KERN_WARNING "or51211: setmode error 1\n");
+		return -1;
+	}
+
+	/* Wait at least 5 msec */
+	msleep(10); /* 20ms */
+	if(i2c_writebytes(state,state->config->demod_address,run_buf,2)) {
+		printk(KERN_WARNING "or51211: setmode error 2\n");
+		return -1;
+	}
+
+	msleep(10); /* 20ms */
+
+	/* Set operation mode in Receiver 1 register;
+	 * type 1:
+	 * data 0x50h  Automatic sets receiver channel conditions
+	 *             Automatic NTSC rejection filter
+	 *             Enable  MPEG serial data output
+	 *             MPEG2tr
+	 *             High tuner phase noise
+	 *             normal +/-150kHz Carrier acquisition range
+	 */
+	if(i2c_writebytes(state,state->config->demod_address,cmd_buf,3)) {
+		printk(KERN_WARNING "or51211: setmode error 3\n");
+		return -1;
+	}
+
+	rec_buf[0] = 0x04;
+	rec_buf[1] = 0x00;
+	rec_buf[2] = 0x03;
+	rec_buf[3] = 0x00;
+	msleep(20); /* 20ms */
+	if(i2c_writebytes(state,state->config->demod_address,rec_buf,3)) {
+		printk(KERN_WARNING "or51211: setmode error 5\n");
+	}
+	msleep(3); /* 3ms */
+	if(i2c_readbytes(state,state->config->demod_address,&rec_buf[10],2)) {
+		printk(KERN_WARNING "or51211: setmode error 6");
+		return -1;
+	}
+	dprintk("setmode rec status %02x %02x\n",rec_buf[10],rec_buf[11]);
+
+	return 0;
+}
+
+static int or51211_set_parameters(struct dvb_frontend* fe,struct dvb_frontend_parameters *param)
+{
+	struct or51211_state* state = (struct or51211_state*) fe->demodulator_priv;
+	u32 freq = 0;
+	u16 tunerfreq = 0;
+	u8 buf[4];
+
+	/* Change only if we are actually changing the channel */
+	if(state->current_frequency != param->frequency) {
+		freq = 44000 + (param->frequency/1000);
+		tunerfreq = freq * 16/1000;
+
+		dprintk("set_parameters frequency = %d (tunerfreq = %d)\n",param->frequency,tunerfreq);
+
+		buf[0] = (tunerfreq >> 8) & 0x7F;
+		buf[1] = (tunerfreq & 0xFF);
+		buf[2] = 0x8E;
+
+		if (param->frequency < 157250000) {
+			buf[3] = 0xA0;
+			dprintk(KERN_WARNING "set_parameters VHF low range\n");
+		} else if (param->frequency < 454000000) {
+			buf[3] = 0x90;
+			dprintk(KERN_WARNING "set_parameters VHF high range\n");
+		} else {
+			buf[3] = 0x30;
+			dprintk(KERN_WARNING "set_parameters UHF range\n");
+		}
+		dprintk("set_parameters tuner bytes: 0x%02x 0x%02x 0x%02x 0x%02x\n",buf[0],buf[1],buf[2],buf[3]);
+
+		if(i2c_writebytes(state,0xC2>>1,buf,4))
+			printk(KERN_WARNING "or51211: set_parameters error writing to tuner\n");
+
+		/* Set to ATSC mode */
+		or51211_setmode(fe,0);
+		
+		/* Update current frequency */
+		state->current_frequency = param->frequency;
+	}
+	return 0;
+}
+
+static int or51211_read_status(struct dvb_frontend* fe, fe_status_t* status)
+{
+	struct or51211_state* state = (struct or51211_state*) fe->demodulator_priv;
+	unsigned char rec_buf[2];
+	unsigned char snd_buf[] = {0x04,0x00,0x03,0x00};
+	*status = 0;
+
+	/* Receiver Status */
+	if(i2c_writebytes(state,state->config->demod_address,snd_buf,3)) {
+		printk(KERN_WARNING "or51132: read_status write error\n");
+		return -1;
+	}
+	msleep(3); /* 3ms */
+	if(i2c_readbytes(state,state->config->demod_address,rec_buf,2)) {
+		printk(KERN_WARNING "or51132: read_status read error\n");
+		return -1;
+	}
+	dprintk("read_status %x %x\n",rec_buf[0],rec_buf[1]);
+
+	if(rec_buf[0] &  0x01) { /* Receiver Lock */
+		*status |= FE_HAS_SIGNAL;
+		*status |= FE_HAS_CARRIER;
+		*status |= FE_HAS_VITERBI;
+		*status |= FE_HAS_SYNC;
+		*status |= FE_HAS_LOCK;
+	}
+	return 0;
+}
+
+/* log10-1 table at .5 increments from 1 to 100.5 */
+unsigned int i100x20log10[] = {
+		0,  352,  602,  795,  954, 1088, 1204, 1306, 1397, 1480,
+	 1556, 1625, 1690, 1750, 1806, 1858, 1908, 1955, 2000, 2042,
+	 2082, 2121, 2158, 2193, 2227, 2260, 2292, 2322, 2352, 2380,
+	 2408, 2434, 2460, 2486, 2510, 2534, 2557, 2580, 2602, 2623,
+	 2644, 2664, 2684, 2704, 2723, 2742, 2760, 2778, 2795, 2813,
+	 2829, 2846, 2862, 2878, 2894, 2909, 2924, 2939, 2954, 2968,
+	 2982, 2996, 3010, 3023, 3037, 3050, 3062, 3075, 3088, 3100,
+	 3112, 3124, 3136, 3148, 3159, 3170, 3182, 3193, 3204, 3214,
+	 3225, 3236, 3246, 3256, 3266, 3276, 3286, 3296, 3306, 3316,
+	 3325, 3334, 3344, 3353, 3362, 3371, 3380, 3389, 3397, 3406,
+	 3415, 3423, 3432, 3440, 3448, 3456, 3464, 3472, 3480, 3488,
+	 3496, 3504, 3511, 3519, 3526, 3534, 3541, 3549, 3556, 3563,
+	 3570, 3577, 3584, 3591, 3598, 3605, 3612, 3619, 3625, 3632,
+	 3639, 3645, 3652, 3658, 3665, 3671, 3677, 3683, 3690, 3696,
+	 3702, 3708, 3714, 3720, 3726, 3732, 3738, 3744, 3750, 3755,
+	 3761, 3767, 3772, 3778, 3784, 3789, 3795, 3800, 3806, 3811,
+	 3816, 3822, 3827, 3832, 3838, 3843, 3848, 3853, 3858, 3863,
+	 3868, 3874, 3879, 3884, 3888, 3893, 3898, 3903, 3908, 3913,
+	 3918, 3922, 3927, 3932, 3936, 3941, 3946, 3950, 3955, 3960,
+	 3964, 3969, 3973, 3978, 3982, 3986, 3991, 3995, 4000, 4004,
+};
+
+unsigned int denom[] = {1,1,100,1000,10000,100000,1000000,10000000,100000000};
+
+unsigned int i20Log10(unsigned short val)
+{
+	unsigned int rntval = 100;
+	unsigned int tmp = val;
+	unsigned int exp = 1;
+
+	while(tmp > 100) {tmp /= 100; exp++;}
+
+	val = (2 * val)/denom[exp];
+	if(exp > 1) rntval = 2000*exp;
+
+	rntval += i100x20log10[val];
+	return rntval;
+}
+
+static int or51211_read_signal_strength(struct dvb_frontend* fe, u16* strength)
+{
+	struct or51211_state* state = (struct or51211_state*) fe->demodulator_priv;
+	u8 rec_buf[2];
+	u8 snd_buf[4];
+	u8 snr_equ;
+
+	/* SNR after Equalizer */
+	snd_buf[0] = 0x04;
+	snd_buf[1] = 0x00;
+	snd_buf[2] = 0x04;
+	snd_buf[3] = 0x00;
+
+	if(i2c_writebytes(state,state->config->demod_address,snd_buf,3)) {
+		printk(KERN_WARNING "or51211: read_status write error\n");
+		return -1;
+	}
+	msleep(3); /* 3ms */
+	if(i2c_readbytes(state,state->config->demod_address,rec_buf,2)) {
+		printk(KERN_WARNING "or51211: read_status read error\n");
+		return -1;
+	}
+	snr_equ = rec_buf[0] & 0xff;
+
+	/* The value reported back from the frontend will be FFFF=100% 0000=0% */
+	*strength = (((5334 - i20Log10(snr_equ))/3+5)*65535)/1000;
+
+	dprintk("read_signal_strength %i\n",*strength);
+
+	return 0;
+}
+
+static int or51211_read_snr(struct dvb_frontend* fe, u16* snr)
+{
+	struct or51211_state* state = (struct or51211_state*) fe->demodulator_priv;
+	u8 rec_buf[2];
+	u8 snd_buf[4];
+
+	/* SNR after Equalizer */
+	snd_buf[0] = 0x04;
+	snd_buf[1] = 0x00;
+	snd_buf[2] = 0x04;
+	snd_buf[3] = 0x00;
+
+	if(i2c_writebytes(state,state->config->demod_address,snd_buf,3)) {
+		printk(KERN_WARNING "or51211: read_status write error\n");
+		return -1;
+	}
+	msleep(3); /* 30ms */
+	if(i2c_readbytes(state,state->config->demod_address,rec_buf,2)) {
+		printk(KERN_WARNING "or51211: read_status read error\n");
+		return -1;
+	}
+	*snr = rec_buf[0] & 0xff;
+
+	dprintk("read_snr %i\n",*snr);
+
+	return 0;
+}
+
+static int or51211_read_ber(struct dvb_frontend* fe, u32* ber)
+{
+	*ber = -ENOSYS;
+	return 0;
+}
+
+static int or51211_read_ucblocks(struct dvb_frontend* fe, u32* ucblocks)
+{
+	*ucblocks = -ENOSYS;
+	return 0;
+}
+
+static int or51211_sleep(struct dvb_frontend* fe)
+{
+	return 0;
+}
+
+static int or51211_init(struct dvb_frontend* fe)
+{
+	struct or51211_state* state = (struct or51211_state*) fe->demodulator_priv;
+	const struct firmware *fw;
+	unsigned char get_ver_buf[] = {0x04,0x00,0x30,0x00,0x00};
+	unsigned char rec_buf[14];
+	int ret,i;
+
+	if (!state->initialized) {
+		/* Request the firmware, this will block until someone uploads it */
+		printk(KERN_WARNING "or51211: Waiting for firmware upload (%s)...\n", OR51211_DEFAULT_FIRMWARE);
+		ret = state->config->request_firmware(fe, &fw, OR51211_DEFAULT_FIRMWARE);
+		printk(KERN_WARNING "or51211: Waiting for firmware upload(2)...\n");
+		if (ret) {
+			printk(KERN_WARNING "or51211: No firmware uploaded (timeout or file not found?)\n");
+			return ret;
+		}
+
+		ret = or51211_load_firmware(fe, fw);
+		if (ret) {
+			printk(KERN_WARNING "or51211: Writing firmware to device failed!\n");
+			release_firmware(fw);
+			return ret;
+		}
+		printk("or51211: Firmware upload complete.\n");
+
+		/* Set operation mode in Receiver 1 register;
+		 * type 1:
+		 * data 0x50h  Automatic sets receiver channel conditions
+		 *             Automatic NTSC rejection filter
+		 *             Enable  MPEG serial data output
+		 *             MPEG2tr
+		 *             High tuner phase noise
+		 *             normal +/-150kHz Carrier acquisition range
+		 */
+		if(i2c_writebytes(state,state->config->demod_address,cmd_buf,3)) {
+			printk(KERN_WARNING "or51211: Load DVR Error 5\n");
+			return -1;
+		}
+
+		/* Read back ucode version to besure we loaded correctly and are really up and running */
+		rec_buf[0] = 0x04;
+		rec_buf[1] = 0x00;
+		rec_buf[2] = 0x03;
+		rec_buf[3] = 0x00;
+		msleep(30); /* 20ms */
+		if(i2c_writebytes(state,state->config->demod_address,rec_buf,3)) {
+			printk(KERN_WARNING "or51211: Load DVR Error A\n");
+			return -1;
+		}
+		msleep(3); /* 3ms */
+		if(i2c_readbytes(state,state->config->demod_address,&rec_buf[10],2)) {
+			printk(KERN_WARNING "or51211: Load DVR Error B\n");
+			return -1;
+		}
+
+		rec_buf[0] = 0x04;
+		rec_buf[1] = 0x00;
+		rec_buf[2] = 0x01;
+		rec_buf[3] = 0x00;
+		msleep(20); /* 20ms */
+		if(i2c_writebytes(state,state->config->demod_address,rec_buf,3)) {
+			printk(KERN_WARNING "or51211: Load DVR Error C\n");
+			return -1;
+		}
+		msleep(3); /* 3ms */
+		if(i2c_readbytes(state,state->config->demod_address,&rec_buf[12],2)) {
+			printk(KERN_WARNING "or51211: Load DVR Error D\n");
+			return -1;
+		}
+
+		for(i = 0; i < 8; i++) {
+			rec_buf[i]=0xed;
+		}
+
+		for(i = 0; i < 5; i++) {
+			msleep(30); /* 20ms */
+			get_ver_buf[4] = i+1;
+			if(i2c_writebytes(state,state->config->demod_address,get_ver_buf,5)) {
+				printk(KERN_WARNING "or51211: Load DVR Error 6 - %d\n",i);
+				return -1;
+			}
+			msleep(3); /* 3ms */
+
+			if(i2c_readbytes(state,state->config->demod_address,&rec_buf[i*2],2)) {
+				printk(KERN_WARNING "or51211: Load DVR Error 7 - %d\n",i);
+				return -1;
+			}
+			if((int)rec_buf[i*2+1]!=i+1){
+			  i--;
+			}
+		}
+		dprintk("read_fwbits %x %x %x %x %x %x %x %x %x %x\n",
+			rec_buf[0], rec_buf[1], rec_buf[2], rec_buf[3],
+			rec_buf[4], rec_buf[5], rec_buf[6], rec_buf[7],
+			rec_buf[8], rec_buf[9]);
+
+		printk(KERN_WARNING "or51211: ver TU%02x%02x%02x VSB mode %02x Status %02x\n",
+				rec_buf[2], rec_buf[4],rec_buf[6],rec_buf[12],rec_buf[10]);
+
+		rec_buf[0] = 0x04;
+		rec_buf[1] = 0x00;
+		rec_buf[2] = 0x03;
+		rec_buf[3] = 0x00;
+		msleep(20); /* 20ms */
+		if(i2c_writebytes(state,state->config->demod_address,rec_buf,3)) {
+			printk(KERN_WARNING "or51211: Load DVR Error 8\n");
+			return -1;
+		}
+		msleep(20); /* 20ms */
+		if(i2c_readbytes(state,state->config->demod_address,&rec_buf[8],2)) {
+			printk(KERN_WARNING "or51211: Load DVR Error 9\n");
+			return -1;
+		}
+		state->initialized = 1;
+	}
+
+	return 0;
+}
+
+static int or51211_get_tune_settings(struct dvb_frontend* fe, struct dvb_frontend_tune_settings* fesettings)
+{
+	fesettings->min_delay_ms = 500;
+	fesettings->step_size = 0;
+	fesettings->max_drift = 0;
+	return 0;
+}
+
+static void or51211_release(struct dvb_frontend* fe)
+{
+	struct or51211_state* state = (struct or51211_state*) fe->demodulator_priv;
+
+	bttv_write_gpio(state->bt->bttv_nr, 0x0001, 0x0000);   /* Now in reset condition */
+	kfree(state);
+}
+
+static struct dvb_frontend_ops or51211_ops;
+
+struct dvb_frontend* or51211_attach(const struct or51211_config* config,
+						struct i2c_adapter* i2c,
+						struct bt878 *bt)
+{
+	struct or51211_state* state = NULL;
+
+	/* Allocate memory for the internal state */
+	state = (struct or51211_state*) kmalloc(sizeof(struct or51211_state), GFP_KERNEL);
+	if (state == NULL) goto error;
+
+	/* Setup the state */
+	state->config = config;
+	state->i2c = i2c;
+	state->bt = bt;
+	memcpy(&state->ops, &or51211_ops, sizeof(struct dvb_frontend_ops));
+	state->initialized = 0;
+	state->current_frequency = 0;
+
+	/* Create dvb_frontend */
+	state->frontend.ops = &state->ops;
+	state->frontend.demodulator_priv = state;
+	return &state->frontend;
+
+error:
+	if (state) kfree(state);
+	return NULL;
+}
+
+static struct dvb_frontend_ops or51211_ops = {
+
+	.info = {
+		.name 				= "Oren OR51211 VSB Frontend",
+		.type 				= FE_ATSC,
+		.frequency_min 		= 44000000,
+		.frequency_max 		= 958000000,
+		.frequency_stepsize	= 166666,
+		.caps = FE_CAN_FEC_1_2 | FE_CAN_FEC_2_3 | FE_CAN_FEC_3_4 |
+			FE_CAN_FEC_5_6 | FE_CAN_FEC_7_8 | FE_CAN_FEC_AUTO |
+			FE_CAN_8VSB 
+	},
+
+	.release = or51211_release,
+
+	.init = or51211_init,
+	.sleep = or51211_sleep,
+
+	.set_frontend = or51211_set_parameters,
+	.get_tune_settings = or51211_get_tune_settings,
+
+	.read_status = or51211_read_status,
+	.read_ber = or51211_read_ber,
+	.read_signal_strength = or51211_read_signal_strength,
+	.read_snr = or51211_read_snr,
+	.read_ucblocks = or51211_read_ucblocks,
+};
+
+module_param(debug, int, 0644);
+MODULE_PARM_DESC(debug, "Turn on/off frontend debugging (default:off).");
+
+MODULE_DESCRIPTION("Oren OR51211 VSB [pcHDTV HD-2000] Demodulator Driver");
+MODULE_AUTHOR("Kirk Lapray");
+MODULE_LICENSE("GPL");
+
+EXPORT_SYMBOL(or51211_attach);
+
diff --git a/linux/drivers/media/dvb/frontends/or51211.h b/linux/drivers/media/dvb/frontends/or51211.h
new file mode 100644
index 000000000..330db1eb9
--- /dev/null
+++ b/linux/drivers/media/dvb/frontends/or51211.h
@@ -0,0 +1,43 @@
+/*
+ *    Support for OR51211 (pcHDTV HD-2000) - VSB
+ *
+ *    Copyright (C) 2005 Kirk Lapray <kirk_lapray@bigfoot.com>
+ *
+ *    This program is free software; you can redistribute it and/or modify
+ *    it under the terms of the GNU General Public License as published by
+ *    the Free Software Foundation; either version 2 of the License, or
+ *    (at your option) any later version.
+ *
+ *    This program is distributed in the hope that it will be useful,
+ *    but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *    MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *    GNU General Public License for more details.
+ *
+ *    You should have received a copy of the GNU General Public License
+ *    along with this program; if not, write to the Free Software
+ *    Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+ *
+*/
+
+#ifndef OR51211_H
+#define OR51211_H
+
+#include <linux/dvb/frontend.h>
+#include <linux/firmware.h>
+#include "bt878.h"
+
+struct or51211_config
+{
+	/* The demodulator's i2c address */
+	u8 demod_address;
+
+	/* Request firmware for device */
+	int (*request_firmware)(struct dvb_frontend* fe, const struct firmware **fw, char* name);
+};
+
+extern struct dvb_frontend* or51211_attach(const struct or51211_config* config,
+						struct i2c_adapter* i2c,
+						struct bt878 *bt);
+
+#endif // OR51211_H
+