merge: http://linuxtv.org/hg/~endriss/v4l-dvb

From: Mauro Carvalho Chehab <mchehab@infradead.org>



Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>

3 files changed, 38 insertions, 23 deletions

diff --git a/linux/drivers/media/dvb/frontends/stv0297.c b/linux/drivers/media/dvb/frontends/stv0297.c
index 2f45fff3a..96f85b2a5 100644
--- a/linux/drivers/media/dvb/frontends/stv0297.c
+++ b/linux/drivers/media/dvb/frontends/stv0297.c
@@ -35,6 +35,7 @@ struct stv0297_state {
 	const struct stv0297_config *config;
 	struct dvb_frontend frontend;
 
+	unsigned long last_ber;
 	unsigned long base_freq;
 };
 
@@ -310,6 +311,8 @@ static int stv0297_init(struct dvb_frontend *fe)
 		stv0297_writereg(state, state->config->inittab[i], state->config->inittab[i+1]);
 	msleep(200);
 
+	state->last_ber = 0;
+
 	return 0;
 }
 
@@ -340,11 +343,13 @@ static int stv0297_read_ber(struct dvb_frontend *fe, u32 * ber)
 	struct stv0297_state *state = fe->demodulator_priv;
 	u8 BER[3];
 
-	stv0297_writereg(state, 0xA0, 0x80);	// Start Counting bit errors for 4096 Bytes
-	mdelay(25);		// Hopefully got 4096 Bytes
 	stv0297_readregs(state, 0xA0, BER, 3);
-	mdelay(25);
-	*ber = (BER[2] << 8 | BER[1]) / (8 * 4096);
+	if (!(BER[0] & 0x80)) {
+		state->last_ber = BER[2] << 8 | BER[1];
+		stv0297_writereg_mask(state, 0xA0, 0x80, 0x80);
+	}
+
+	*ber = state->last_ber;
 
 	return 0;
 }
@@ -376,9 +381,14 @@ static int stv0297_read_ucblocks(struct dvb_frontend *fe, u32 * ucblocks)
 {
 	struct stv0297_state *state = fe->demodulator_priv;
 
+	stv0297_writereg_mask(state, 0xDF, 0x03, 0x03); /* freeze the counters */
+
 	*ucblocks = (stv0297_readreg(state, 0xD5) << 8)
 		| stv0297_readreg(state, 0xD4);
 
+	stv0297_writereg_mask(state, 0xDF, 0x03, 0x02); /* clear the counters */
+	stv0297_writereg_mask(state, 0xDF, 0x03, 0x01); /* re-enable the counters */
+
 	return 0;
 }
 
@@ -648,6 +658,7 @@ struct dvb_frontend *stv0297_attach(const struct stv0297_config *config,
 	/* setup the state */
 	state->config = config;
 	state->i2c = i2c;
+	state->last_ber = 0;
 	state->base_freq = 0;
 
 	/* check if the demod is there */
diff --git a/linux/drivers/media/dvb/ttpci/av7110_v4l.c b/linux/drivers/media/dvb/ttpci/av7110_v4l.c
index 0510a80f2..3795432ad 100644
--- a/linux/drivers/media/dvb/ttpci/av7110_v4l.c
+++ b/linux/drivers/media/dvb/ttpci/av7110_v4l.c
@@ -141,17 +141,6 @@ static int ves1820_writereg(struct saa7146_dev *dev, u8 addr, u8 reg, u8 data)
 	return 0;
 }
 
-static int stv0297_writereg(struct saa7146_dev *dev, u8 addr, u8 reg, u8 data)
-{
-	u8 buf [] = { reg, data };
-	struct i2c_msg msg = { .addr = addr, .flags = 0, .buf = buf, .len = 2 };
-
-	if (1 != saa7146_i2c_transfer(dev, &msg, 1, 1))
-		return -1;
-	return 0;
-}
-
-
 static int tuner_write(struct saa7146_dev *dev, u8 addr, u8 data [4])
 {
 	struct i2c_msg msg = { .addr = addr, .flags = 0, .buf = data, .len = 4 };
@@ -194,6 +183,7 @@ static int ves1820_set_tv_freq(struct saa7146_dev *dev, u32 freq)
 
 static int stv0297_set_tv_freq(struct saa7146_dev *dev, u32 freq)
 {
+	struct av7110 *av7110 = (struct av7110*)dev->ext_priv;
 	u32 div;
 	u8 data[4];
 
@@ -214,8 +204,8 @@ static int stv0297_set_tv_freq(struct saa7146_dev *dev, u32 freq)
 	else
 		return -EINVAL;
 
-	stv0297_writereg(dev, 0x1C, 0x87, 0x78);
-	stv0297_writereg(dev, 0x1C, 0x86, 0xc8);
+	if (av7110->fe->ops.i2c_gate_ctrl)
+		av7110->fe->ops.i2c_gate_ctrl(av7110->fe, 1);
 	return tuner_write(dev, 0x63, data);
 }
 
diff --git a/linux/drivers/media/dvb/ttpci/budget-ci.c b/linux/drivers/media/dvb/ttpci/budget-ci.c
index f86ba0010..7cb60e37b 100644
--- a/linux/drivers/media/dvb/ttpci/budget-ci.c
+++ b/linux/drivers/media/dvb/ttpci/budget-ci.c
@@ -130,6 +130,7 @@ static void msp430_ir_interrupt(unsigned long data)
 	int toggle;
 	static int prev_toggle = -1;
 	static u32 ir_key;
+	static int state = 0;
 	u32 command = ttpci_budget_debiread(&budget_ci->budget, DEBINOSWAP, DEBIADDR_IR, 2, 1, 0) >> 8;
 
 	/*
@@ -138,21 +139,34 @@ static void msp430_ir_interrupt(unsigned long data)
 	 * type1: X1CCCCCC, C = command bits (0 - 63)
 	 * type2: X0TDDDDD, D = device bits (0 - 31), T = RC5 toggle bit
 	 *
-	 * More than one command byte may be generated before the device byte
-	 * Only when we have both, a correct keypress is generated
+	 * Each signal from the remote control can generate one or more command
+	 * bytes and one or more device bytes. For the repeated bytes, the
+	 * highest bit (X) is set. The first command byte is always generated
+	 * before the first device byte. Other than that, no specific order
+	 * seems to apply.
+	 *
+	 * Only when we have a command and device byte, a keypress is
+	 * generated.
 	 */
 
+	if (ir_debug)
+		printk("budget_ci: received byte 0x%02x\n", command);
+
+	/* Is this a repeated byte? */
+	if (command & 0x80)
+		return;
+
 	/* Is this a RC5 command byte? */
 	if (command & 0x40) {
-		if (ir_debug)
-			printk("budget_ci: received command byte 0x%02x\n", command);
+		state = 1;
 		ir_key = command & 0x3f;
 		return;
 	}
 
 	/* It's a RC5 device byte */
-	if (ir_debug)
-		printk("budget_ci: received device byte 0x%02x\n", command);
+	if (!state)
+		return;
+	state = 0;
 	device = command & 0x1f;
 	toggle = command & 0x20;