diff options
| author | Mauro Carvalho Chehab <mchehab@infradead.org> | 2007-11-02 14:35:00 -0200 |
|---|---|---|
| committer | Mauro Carvalho Chehab <mchehab@infradead.org> | 2007-11-02 14:35:00 -0200 |
| commit | c4a85f85d6389aef0ac3ea1256c4c86ef78b3704 (patch) | |
| tree | eb2d108f39ad6204c0ae8ee61c75e8eb7f7c8bba /linux/drivers/media/video/bt8xx/bttv-cards.c | |
| parent | 9b96e945de97e6d3b2f1dc356b2334f2854f3d63 (diff) | |
| download | mediapointer-dvb-s2-c4a85f85d6389aef0ac3ea1256c4c86ef78b3704.tar.gz mediapointer-dvb-s2-c4a85f85d6389aef0ac3ea1256c4c86ef78b3704.tar.bz2 | |
backport changeset 3a4fa0a25da81600ea0bcd75692ae8ca6050d165
From: Mauro Carvalho Chehab <mchehab@infradead.org>
kernel-sync:
Author: Robert P. J. Day <rpjday@mindspring.com>
Date: Fri Oct 19 23:10:43 2007 +0200
Fix misspellings of "system", "controller", "interrupt" and "necessary".
Fix the various misspellings of "system", controller", "interrupt" and
"[un]necessary".
Signed-off-by: Robert P. J. Day <rpjday@mindspring.com>
Signed-off-by: Adrian Bunk <bunk@kernel.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
Diffstat (limited to 'linux/drivers/media/video/bt8xx/bttv-cards.c')
| -rw-r--r-- | linux/drivers/media/video/bt8xx/bttv-cards.c | 22 |
1 files changed, 11 insertions, 11 deletions
diff --git a/linux/drivers/media/video/bt8xx/bttv-cards.c b/linux/drivers/media/video/bt8xx/bttv-cards.c index 730968181..a2424738f 100644 --- a/linux/drivers/media/video/bt8xx/bttv-cards.c +++ b/linux/drivers/media/video/bt8xx/bttv-cards.c @@ -4422,18 +4422,18 @@ void tea5757_set_freq(struct bttv *btv, unsigned short freq) * * The board hardwire Y0 (xpoint) to MUX1 and MUXOUT to Yin. * GPIO pins are wired as: - * GPIO[0:3] - AX[0:3] (xpoint) - P1[0:3] (microcontroler) - * GPIO[4:6] - AY[0:2] (xpoint) - P1[4:6] (microcontroler) - * GPIO[7] - DATA (xpoint) - P1[7] (microcontroler) - * GPIO[8] - - P3[5] (microcontroler) - * GPIO[9] - RESET (xpoint) - P3[6] (microcontroler) - * GPIO[10] - STROBE (xpoint) - P3[7] (microcontroler) - * GPINTR - - P3[4] (microcontroler) + * GPIO[0:3] - AX[0:3] (xpoint) - P1[0:3] (microcontroller) + * GPIO[4:6] - AY[0:2] (xpoint) - P1[4:6] (microcontroller) + * GPIO[7] - DATA (xpoint) - P1[7] (microcontroller) + * GPIO[8] - - P3[5] (microcontroller) + * GPIO[9] - RESET (xpoint) - P3[6] (microcontroller) + * GPIO[10] - STROBE (xpoint) - P3[7] (microcontroller) + * GPINTR - - P3[4] (microcontroller) * - * The microcontroler is a 80C32 like. It should be possible to change xpoint - * configuration either directly (as we are doing) or using the microcontroler + * The microcontroller is a 80C32 like. It should be possible to change xpoint + * configuration either directly (as we are doing) or using the microcontroller * which is also wired to I2C interface. I have no further info on the - * microcontroler features, one would need to disassembly the firmware. + * microcontroller features, one would need to disassembly the firmware. * note: the vendor refused to give any information on this product, all * that stuff was found using a multimeter! :) */ @@ -4501,7 +4501,7 @@ static void tibetCS16_init(struct bttv *btv) * The analog switch is controlled by the "master", but the detection order * of the four BT878A chips is in an order which I just don't understand. * The "master" is actually the second controller to be detected. The - * logic on the board uses logical numbers for the 4 controlers, but + * logic on the board uses logical numbers for the 4 controllers, but * those numbers are different from the detection sequence. When working * with the analog switch, we need to "map" from the detection sequence * over to the board's logical controller number. This mapping sequence |