merge: http://kernellabs.com/hg/~dheitmueller/misc-fixes-2

From: Mauro Carvalho Chehab <mchehab@redhat.com>

Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

4 files changed, 59 insertions, 10 deletions

diff --git a/linux/drivers/media/video/cx23885/cx23885-cards.c b/linux/drivers/media/video/cx23885/cx23885-cards.c
index 93176fe4b..35b2abd6a 100644
--- a/linux/drivers/media/video/cx23885/cx23885-cards.c
+++ b/linux/drivers/media/video/cx23885/cx23885-cards.c
@@ -198,6 +198,10 @@ struct cx23885_board cx23885_boards[] = {
 		.name		= "Hauppauge WinTV-HVR1210",
 		.portc		= CX23885_MPEG_DVB,
 	},
+	[CX23885_BOARD_MYGICA_X8506] = {
+		.name		= "Mygica X8506 DMB-TH",
+		.portb		= CX23885_MPEG_DVB,
+	},
 };
 const unsigned int cx23885_bcount = ARRAY_SIZE(cx23885_boards);
 
@@ -317,6 +321,10 @@ struct cx23885_subid cx23885_subids[] = {
 		.subvendor = 0x0070,
 		.subdevice = 0x2295,
 		.card      = CX23885_BOARD_HAUPPAUGE_HVR1210,
+	}, {
+		.subvendor = 0x14f1,
+		.subdevice = 0x8651,
+		.card      = CX23885_BOARD_MYGICA_X8506,
 	},
 };
 const unsigned int cx23885_idcount = ARRAY_SIZE(cx23885_subids);
@@ -707,6 +715,15 @@ void cx23885_gpio_setup(struct cx23885_dev *dev)
 		mdelay(20);
 		cx23885_gpio_set(dev, GPIO_9);
 		break;
+	case CX23885_BOARD_MYGICA_X8506:
+		/* GPIO-1 reset XC5000 */
+		/* GPIO-2 reset LGS8GL5 */
+		cx_set(GP0_IO, 0x00060000);
+		cx_clear(GP0_IO, 0x00000006);
+		mdelay(100);
+		cx_set(GP0_IO, 0x00060006);
+		mdelay(100);
+		break;
 	}
 }
 
@@ -810,6 +827,11 @@ void cx23885_card_setup(struct cx23885_dev *dev)
 		ts2->ts_clk_en_val = 0x1; /* Enable TS_CLK */
 		ts2->src_sel_val   = CX23885_SRC_SEL_PARALLEL_MPEG_VIDEO;
 		break;
+	case CX23885_BOARD_MYGICA_X8506:
+		ts1->gen_ctrl_val  = 0x5; /* Parallel */
+		ts1->ts_clk_en_val = 0x1; /* Enable TS_CLK */
+		ts1->src_sel_val   = CX23885_SRC_SEL_PARALLEL_MPEG_VIDEO;
+		break;
 	case CX23885_BOARD_HAUPPAUGE_HVR1250:
 	case CX23885_BOARD_HAUPPAUGE_HVR1500:
 	case CX23885_BOARD_HAUPPAUGE_HVR1500Q:
diff --git a/linux/drivers/media/video/cx23885/cx23885-dvb.c b/linux/drivers/media/video/cx23885/cx23885-dvb.c
index 4efc7dee1..9c3259b22 100644
--- a/linux/drivers/media/video/cx23885/cx23885-dvb.c
+++ b/linux/drivers/media/video/cx23885/cx23885-dvb.c
@@ -50,6 +50,7 @@
 #include "lnbh24.h"
 #include "cx24116.h"
 #include "cimax2.h"
+#include "lgs8gxx.h"
 #include "netup-eeprom.h"
 #include "netup-init.h"
 #include "lgdt3305.h"
@@ -421,10 +422,29 @@ static struct cx24116_config dvbworld_cx24116_config = {
 	.demod_address = 0x05,
 };
 
+static struct lgs8gxx_config mygica_x8506_lgs8gl5_config = {
+	.prod = LGS8GXX_PROD_LGS8GL5,
+	.demod_address = 0x19,
+	.serial_ts = 0,
+	.ts_clk_pol = 1,
+	.ts_clk_gated = 1,
+	.if_clk_freq = 30400, /* 30.4 MHz */
+	.if_freq = 5380, /* 5.38 MHz */
+	.if_neg_center = 1,
+	.ext_adc = 0,
+	.adc_signed = 0,
+	.if_neg_edge = 0,
+};
+
+static struct xc5000_config mygica_x8506_xc5000_config = {
+	.i2c_address = 0x61,
+	.if_khz = 5380,
+};
+
 static int dvb_register(struct cx23885_tsport *port)
 {
 	struct cx23885_dev *dev = port->dev;
-	struct cx23885_i2c *i2c_bus = NULL;
+	struct cx23885_i2c *i2c_bus = NULL, *i2c_bus2 = NULL;
 	struct videobuf_dvb_frontend *fe0;
 	int ret;
 
@@ -746,6 +766,19 @@ static int dvb_register(struct cx23885_tsport *port)
 			break;
 		}
 		break;
+	case CX23885_BOARD_MYGICA_X8506:
+		i2c_bus = &dev->i2c_bus[0];
+		i2c_bus2 = &dev->i2c_bus[1];
+		fe0->dvb.frontend = dvb_attach(lgs8gxx_attach,
+			&mygica_x8506_lgs8gl5_config,
+			&i2c_bus->i2c_adap);
+		if (fe0->dvb.frontend != NULL) {
+			dvb_attach(xc5000_attach,
+				fe0->dvb.frontend,
+				&i2c_bus2->i2c_adap,
+				&mygica_x8506_xc5000_config);
+		}
+		break;
 	default:
 		printk(KERN_INFO "%s: The frontend of your DVB/ATSC card "
 			" isn't supported yet\n",
diff --git a/linux/drivers/media/video/cx23885/cx23885-video.c b/linux/drivers/media/video/cx23885/cx23885-video.c
index 2855a49b5..378943605 100644
--- a/linux/drivers/media/video/cx23885/cx23885-video.c
+++ b/linux/drivers/media/video/cx23885/cx23885-video.c
@@ -1035,15 +1035,8 @@ static int vidioc_try_fmt_vid_cap(struct file *file, void *priv,
 	}
 
 	f->fmt.pix.field = field;
-	if (f->fmt.pix.height < 32)
-		f->fmt.pix.height = 32;
-	if (f->fmt.pix.height > maxh)
-		f->fmt.pix.height = maxh;
-	if (f->fmt.pix.width < 48)
-		f->fmt.pix.width = 48;
-	if (f->fmt.pix.width > maxw)
-		f->fmt.pix.width = maxw;
-	f->fmt.pix.width &= ~0x03;
+	v4l_bound_align_image(&f->fmt.pix.width, 48, maxw, 2,
+			      &f->fmt.pix.height, 32, maxh, 0, 0);
 	f->fmt.pix.bytesperline =
 		(f->fmt.pix.width * fmt->depth) >> 3;
 	f->fmt.pix.sizeimage =
diff --git a/linux/drivers/media/video/cx23885/cx23885.h b/linux/drivers/media/video/cx23885/cx23885.h
index 8dba2fdd6..2022ed7de 100644
--- a/linux/drivers/media/video/cx23885/cx23885.h
+++ b/linux/drivers/media/video/cx23885/cx23885.h
@@ -76,6 +76,7 @@
 #define CX23885_BOARD_HAUPPAUGE_HVR1275        19
 #define CX23885_BOARD_HAUPPAUGE_HVR1255        20
 #define CX23885_BOARD_HAUPPAUGE_HVR1210        21
+#define CX23885_BOARD_MYGICA_X8506             22
 
 #define GPIO_0 0x00000001
 #define GPIO_1 0x00000002