merge: http://linuxtv.org/hg/~pinchartl/uvcvideo/

From: Mauro Carvalho Chehab <mchehab@redhat.com>

Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

4 files changed, 36 insertions, 4 deletions

diff --git a/linux/drivers/media/video/cx88/cx88-cards.c b/linux/drivers/media/video/cx88/cx88-cards.c
index a4d49fbf7..546793c02 100644
--- a/linux/drivers/media/video/cx88/cx88-cards.c
+++ b/linux/drivers/media/video/cx88/cx88-cards.c
@@ -2002,6 +2002,13 @@ static const struct cx88_board cx88_boards[] = {
 		},
 		.mpeg           = CX88_MPEG_DVB,
 	},
+	[CX88_BOARD_HAUPPAUGE_IRONLY] = {
+		.name           = "Hauppauge WinTV-IR Only",
+		.tuner_type     = UNSET,
+		.radio_type     = UNSET,
+		.tuner_addr	= ADDR_UNSET,
+		.radio_addr	= ADDR_UNSET,
+	},
 };
 
 /* ------------------------------------------------------------------ */
@@ -2415,6 +2422,10 @@ static const struct cx88_subid cx88_subids[] = {
 		.subvendor = 0x153b,
 		.subdevice = 0x1177,
 		.card      = CX88_BOARD_TERRATEC_CINERGY_HT_PCI_MKII,
+	}, {
+		.subvendor = 0x0070,
+		.subdevice = 0x9290,
+		.card      = CX88_BOARD_HAUPPAUGE_IRONLY,
 	},
 };
 
@@ -2481,6 +2492,7 @@ static void hauppauge_eeprom(struct cx88_core *core, u8 *eeprom_data)
 	case 90500: /* Nova-T-PCI (oem) */
 	case 90501: /* Nova-T-PCI (oem/IR) */
 	case 92000: /* Nova-SE2 (OEM, No Video or IR) */
+	case 92900: /* WinTV-IROnly (No analog or digital Video inputs) */
 	case 94009: /* WinTV-HVR1100 (Video and IR Retail) */
 	case 94501: /* WinTV-HVR1100 (Video and IR OEM) */
 	case 96009: /* WinTV-HVR1300 (PAL Video, MPEG Video and IR RX) */
@@ -2723,10 +2735,22 @@ static int cx88_xc5000_tuner_callback(struct cx88_core *core,
 	switch (core->boardnr) {
 	case CX88_BOARD_PINNACLE_PCTV_HD_800i:
 		if (command == 0) { /* This is the reset command from xc5000 */
-			/* Reset XC5000 tuner via SYS_RSTO_pin */
-			cx_write(MO_SRST_IO, 0);
-			msleep(10);
-			cx_write(MO_SRST_IO, 1);
+
+			/* djh - According to the engineer at PCTV Systems,
+			   the xc5000 reset pin is supposed to be on GPIO12.
+			   However, despite three nights of effort, pulling
+			   that GPIO low didn't reset the xc5000.  While
+			   pulling MO_SRST_IO low does reset the xc5000, this
+			   also resets in the s5h1409 being reset as well.
+			   This causes tuning to always fail since the internal
+			   state of the s5h1409 does not match the driver's
+			   state.  Given that the only two conditions in which
+			   the driver performs a reset is during firmware load
+			   and powering down the chip, I am taking out the
+			   reset.  We know that the chip is being reset
+			   when the cx88 comes online, and not being able to
+			   do power management for this board is worse than
+			   not having any tuning at all. */
 			return 0;
 		} else {
 			err_printk(core, "xc5000: unknown tuner "
@@ -2940,6 +2964,7 @@ static void cx88_card_setup(struct cx88_core *core)
 	case CX88_BOARD_HAUPPAUGE_HVR1300:
 	case CX88_BOARD_HAUPPAUGE_HVR4000:
 	case CX88_BOARD_HAUPPAUGE_HVR4000LITE:
+	case CX88_BOARD_HAUPPAUGE_IRONLY:
 		if (0 == core->i2c_rc)
 			hauppauge_eeprom(core, eeprom);
 		break;
diff --git a/linux/drivers/media/video/cx88/cx88-input.c b/linux/drivers/media/video/cx88/cx88-input.c
index 8a2e631b7..dad809335 100644
--- a/linux/drivers/media/video/cx88/cx88-input.c
+++ b/linux/drivers/media/video/cx88/cx88-input.c
@@ -92,6 +92,7 @@ static void cx88_ir_handle_key(struct cx88_IR *ir)
 		gpio=(gpio & 0x7fd) + (auxgpio & 0xef);
 		break;
 	case CX88_BOARD_WINFAST_DTV1000:
+	case CX88_BOARD_WINFAST_TV2000_XP_GLOBAL:
 		gpio = (gpio & 0x6ff) | ((cx_read(MO_GP1_IO) << 8) & 0x900);
 		auxgpio = gpio;
 		break;
@@ -230,6 +231,7 @@ int cx88_ir_init(struct cx88_core *core, struct pci_dev *pci)
 	case CX88_BOARD_HAUPPAUGE_HVR4000LITE:
 	case CX88_BOARD_PCHDTV_HD3000:
 	case CX88_BOARD_PCHDTV_HD5500:
+	case CX88_BOARD_HAUPPAUGE_IRONLY:
 		ir_codes = ir_codes_hauppauge_new;
 		ir_type = IR_TYPE_RC5;
 		ir->sampling = 1;
@@ -243,6 +245,7 @@ int cx88_ir_init(struct cx88_core *core, struct pci_dev *pci)
 		break;
 	case CX88_BOARD_WINFAST2000XP_EXPERT:
 	case CX88_BOARD_WINFAST_DTV1000:
+	case CX88_BOARD_WINFAST_TV2000_XP_GLOBAL:
 		ir_codes = ir_codes_winfast;
 		ir->gpio_addr = MO_GP0_IO;
 		ir->mask_keycode = 0x8f8;
@@ -476,6 +479,7 @@ void cx88_ir_irq(struct cx88_core *core)
 	case CX88_BOARD_HAUPPAUGE_HVR4000LITE:
 	case CX88_BOARD_PCHDTV_HD3000:
 	case CX88_BOARD_PCHDTV_HD5500:
+	case CX88_BOARD_HAUPPAUGE_IRONLY:
 		ircode = ir_decode_biphase(ir->samples, ir->scount, 5, 7);
 		ir_dprintk("biphase decoded: %x\n", ircode);
 		/*
diff --git a/linux/drivers/media/video/cx88/cx88-video.c b/linux/drivers/media/video/cx88/cx88-video.c
index 88a326f61..2dfa4c9c3 100644
--- a/linux/drivers/media/video/cx88/cx88-video.c
+++ b/linux/drivers/media/video/cx88/cx88-video.c
@@ -1152,8 +1152,10 @@ static int video_release(struct file *file)
 	file->private_data = NULL;
 	kfree(fh);
 
+	mutex_lock(&dev->core->lock);
 	if(atomic_dec_and_test(&dev->core->users))
 		call_all(dev->core, tuner, s_standby);
+	mutex_unlock(&dev->core->lock);
 
 	return 0;
 }
diff --git a/linux/drivers/media/video/cx88/cx88.h b/linux/drivers/media/video/cx88/cx88.h
index 1cf6900e0..0c00c34bc 100644
--- a/linux/drivers/media/video/cx88/cx88.h
+++ b/linux/drivers/media/video/cx88/cx88.h
@@ -236,6 +236,7 @@ extern struct sram_channel cx88_sram_channels[];
 #define CX88_BOARD_TBS_8910                77
 #define CX88_BOARD_PROF_6200               78
 #define CX88_BOARD_TERRATEC_CINERGY_HT_PCI_MKII 79
+#define CX88_BOARD_HAUPPAUGE_IRONLY        80
 
 enum cx88_itype {
 	CX88_VMUX_COMPOSITE1 = 1,