merge: http://linuxtv.org/hg/~pinchartl/uvcvideo

From: Mauro Carvalho Chehab <mchehab@redhat.com>

Priority: normal

Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

8 files changed, 1080 insertions, 276 deletions

diff --git a/linux/drivers/media/video/em28xx/em28xx-audio.c b/linux/drivers/media/video/em28xx/em28xx-audio.c
index bec42349e..b86b0870d 100644
--- a/linux/drivers/media/video/em28xx/em28xx-audio.c
+++ b/linux/drivers/media/video/em28xx/em28xx-audio.c
@@ -496,11 +496,12 @@ static int em28xx_audio_init(struct em28xx *dev)
 	struct snd_card     *card;
 #endif
 	static int          devnr;
-	int                 ret, err;
+	int                 err;
 
-	if (dev->has_audio_class) {
+	if (dev->has_alsa_audio != 1) {
 		/* This device does not support the extension (in this case
-		   the device is expecting the snd-usb-audio module) */
+		   the device is expecting the snd-usb-audio module or
+		   doesn't have analog audio support at all) */
 		return 0;
 	}
 
@@ -552,9 +553,10 @@ static int em28xx_audio_fini(struct em28xx *dev)
 	if (dev == NULL)
 		return 0;
 
-	if (dev->has_audio_class) {
+	if (dev->has_alsa_audio != 1) {
 		/* This device does not support the extension (in this case
-		   the device is expecting the snd-usb-audio module */
+		   the device is expecting the snd-usb-audio module or
+		   doesn't have analog audio support at all) */
 		return 0;
 	}
 
diff --git a/linux/drivers/media/video/em28xx/em28xx-cards.c b/linux/drivers/media/video/em28xx/em28xx-cards.c
index 4f078da31..d2967c434 100644
--- a/linux/drivers/media/video/em28xx/em28xx-cards.c
+++ b/linux/drivers/media/video/em28xx/em28xx-cards.c
@@ -59,7 +59,7 @@ struct em28xx_board em28xx_boards[] = {
 		.input         = { {
 			.type     = EM28XX_VMUX_COMPOSITE1,
 			.vmux     = 0,
-			.amux     = 0,
+			.amux     = EM28XX_AMUX_VIDEO,
 		} },
 	},
 	[EM2800_BOARD_UNKNOWN] = {
@@ -71,11 +71,11 @@ struct em28xx_board em28xx_boards[] = {
 		.input           = { {
 			.type     = EM28XX_VMUX_COMPOSITE1,
 			.vmux     = SAA7115_COMPOSITE0,
-			.amux     = 1,
+			.amux     = EM28XX_AMUX_LINE_IN,
 		}, {
 			.type     = EM28XX_VMUX_SVIDEO,
 			.vmux     = SAA7115_SVIDEO3,
-			.amux     = 1,
+			.amux     = EM28XX_AMUX_LINE_IN,
 		} },
 	},
 	[EM2820_BOARD_UNKNOWN] = {
@@ -91,7 +91,7 @@ struct em28xx_board em28xx_boards[] = {
 		.input         = { {
 			.type     = EM28XX_VMUX_COMPOSITE1,
 			.vmux     = 0,
-			.amux     = 0,
+			.amux     = EM28XX_AMUX_VIDEO,
 		} },
 	},
 	[EM2820_BOARD_KWORLD_PVRTV2800RF] = {
@@ -104,11 +104,11 @@ struct em28xx_board em28xx_boards[] = {
 		.input           = { {
 			.type     = EM28XX_VMUX_COMPOSITE1,
 			.vmux     = SAA7115_COMPOSITE0,
-			.amux     = 1,
+			.amux     = EM28XX_AMUX_LINE_IN,
 		}, {
 			.type     = EM28XX_VMUX_SVIDEO,
 			.vmux     = SAA7115_SVIDEO3,
-			.amux     = 1,
+			.amux     = EM28XX_AMUX_LINE_IN,
 		} },
 	},
 	[EM2820_BOARD_TERRATEC_CINERGY_250] = {
@@ -120,15 +120,15 @@ struct em28xx_board em28xx_boards[] = {
 		.input          = { {
 			.type     = EM28XX_VMUX_TELEVISION,
 			.vmux     = SAA7115_COMPOSITE2,
-			.amux     = 1,
+			.amux     = EM28XX_AMUX_LINE_IN,
 		}, {
 			.type     = EM28XX_VMUX_COMPOSITE1,
 			.vmux     = SAA7115_COMPOSITE0,
-			.amux     = 1,
+			.amux     = EM28XX_AMUX_LINE_IN,
 		}, {
 			.type     = EM28XX_VMUX_SVIDEO,
 			.vmux     = SAA7115_SVIDEO3,
-			.amux     = 1,
+			.amux     = EM28XX_AMUX_LINE_IN,
 		} },
 	},
 	[EM2820_BOARD_PINNACLE_USB_2] = {
@@ -140,15 +140,15 @@ struct em28xx_board em28xx_boards[] = {
 		.input          = { {
 			.type     = EM28XX_VMUX_TELEVISION,
 			.vmux     = SAA7115_COMPOSITE2,
-			.amux     = 0,
+			.amux     = EM28XX_AMUX_VIDEO,
 		}, {
 			.type     = EM28XX_VMUX_COMPOSITE1,
 			.vmux     = SAA7115_COMPOSITE0,
-			.amux     = 1,
+			.amux     = EM28XX_AMUX_LINE_IN,
 		}, {
 			.type     = EM28XX_VMUX_SVIDEO,
 			.vmux     = SAA7115_SVIDEO3,
-			.amux     = 1,
+			.amux     = EM28XX_AMUX_LINE_IN,
 		} },
 	},
 	[EM2820_BOARD_HAUPPAUGE_WINTV_USB_2] = {
@@ -183,15 +183,15 @@ struct em28xx_board em28xx_boards[] = {
 		.input          = { {
 			.type     = EM28XX_VMUX_TELEVISION,
 			.vmux     = SAA7115_COMPOSITE2,
-			.amux     = 1,
+			.amux     = EM28XX_AMUX_LINE_IN,
 		}, {
 			.type     = EM28XX_VMUX_COMPOSITE1,
 			.vmux     = SAA7115_COMPOSITE0,
-			.amux     = 1,
+			.amux     = EM28XX_AMUX_LINE_IN,
 		}, {
 			.type     = EM28XX_VMUX_SVIDEO,
 			.vmux     = SAA7115_SVIDEO3,
-			.amux     = 1,
+			.amux     = EM28XX_AMUX_LINE_IN,
 		} },
 	},
 	[EM2820_BOARD_HERCULES_SMART_TV_USB2] = {
@@ -204,15 +204,15 @@ struct em28xx_board em28xx_boards[] = {
 		.input        = { {
 			.type     = EM28XX_VMUX_TELEVISION,
 			.vmux     = SAA7115_COMPOSITE2,
-			.amux     = 1,
+			.amux     = EM28XX_AMUX_LINE_IN,
 		}, {
 			.type     = EM28XX_VMUX_COMPOSITE1,
 			.vmux     = SAA7115_COMPOSITE0,
-			.amux     = 1,
+			.amux     = EM28XX_AMUX_LINE_IN,
 		}, {
 			.type     = EM28XX_VMUX_SVIDEO,
 			.vmux     = SAA7115_SVIDEO3,
-			.amux     = 1,
+			.amux     = EM28XX_AMUX_LINE_IN,
 		} },
 	},
 	[EM2820_BOARD_PINNACLE_USB_2_FM1216ME] = {
@@ -226,15 +226,15 @@ struct em28xx_board em28xx_boards[] = {
 		.input          = { {
 			.type     = EM28XX_VMUX_TELEVISION,
 			.vmux     = SAA7115_COMPOSITE2,
-			.amux     = 0,
+			.amux     = EM28XX_AMUX_VIDEO,
 		}, {
 			.type     = EM28XX_VMUX_COMPOSITE1,
 			.vmux     = SAA7115_COMPOSITE0,
-			.amux     = 1,
+			.amux     = EM28XX_AMUX_LINE_IN,
 		}, {
 			.type     = EM28XX_VMUX_SVIDEO,
 			.vmux     = SAA7115_SVIDEO3,
-			.amux     = 1,
+			.amux     = EM28XX_AMUX_LINE_IN,
 		} },
 	},
 	[EM2820_BOARD_GADMEI_UTV310] = {
@@ -247,15 +247,15 @@ struct em28xx_board em28xx_boards[] = {
 		.input          = { {
 			.type     = EM28XX_VMUX_TELEVISION,
 			.vmux     = SAA7115_COMPOSITE1,
-			.amux     = 1,
+			.amux     = EM28XX_AMUX_LINE_IN,
 		}, {
 			.type     = EM28XX_VMUX_COMPOSITE1,
 			.vmux     = SAA7115_COMPOSITE0,
-			.amux     = 1,
+			.amux     = EM28XX_AMUX_LINE_IN,
 		}, {
 			.type     = EM28XX_VMUX_SVIDEO,
 			.vmux     = SAA7115_SVIDEO3,
-			.amux     = 1,
+			.amux     = EM28XX_AMUX_LINE_IN,
 		} },
 	},
 	[EM2820_BOARD_LEADTEK_WINFAST_USBII_DELUXE] = {
@@ -268,15 +268,15 @@ struct em28xx_board em28xx_boards[] = {
 		.input          = { {
 			.type     = EM28XX_VMUX_TELEVISION,
 			.vmux     = 2,
-			.amux     = 0,
+			.amux     = EM28XX_AMUX_VIDEO,
 		}, {
 			.type     = EM28XX_VMUX_COMPOSITE1,
 			.vmux     = 0,
-			.amux     = 1,
+			.amux     = EM28XX_AMUX_LINE_IN,
 		}, {
 			.type     = EM28XX_VMUX_SVIDEO,
 			.vmux     = 9,
-			.amux     = 1,
+			.amux     = EM28XX_AMUX_LINE_IN,
 		} },
 	},
 	[EM2820_BOARD_PINNACLE_DVC_100] = {
@@ -287,11 +287,11 @@ struct em28xx_board em28xx_boards[] = {
 		.input          = { {
 			.type     = EM28XX_VMUX_COMPOSITE1,
 			.vmux     = SAA7115_COMPOSITE0,
-			.amux     = 1,
+			.amux     = EM28XX_AMUX_LINE_IN,
 		}, {
 			.type     = EM28XX_VMUX_SVIDEO,
 			.vmux     = SAA7115_SVIDEO3,
-			.amux     = 1,
+			.amux     = EM28XX_AMUX_LINE_IN,
 		} },
 	},
 	[EM2820_BOARD_VIDEOLOGY_20K14XUSB] = {
@@ -301,7 +301,7 @@ struct em28xx_board em28xx_boards[] = {
 		.input         = { {
 			.type     = EM28XX_VMUX_COMPOSITE1,
 			.vmux     = 0,
-			.amux     = 0,
+			.amux     = EM28XX_AMUX_VIDEO,
 		} },
 	},
 	[EM2821_BOARD_PROLINK_PLAYTV_USB2] = {
@@ -315,15 +315,15 @@ struct em28xx_board em28xx_boards[] = {
 		.input          = { {
 			.type     = EM28XX_VMUX_TELEVISION,
 			.vmux     = SAA7115_COMPOSITE2,
-			.amux     = 1,
+			.amux     = EM28XX_AMUX_LINE_IN,
 		}, {
 			.type     = EM28XX_VMUX_COMPOSITE1,
 			.vmux     = SAA7115_COMPOSITE0,
-			.amux     = 1,
+			.amux     = EM28XX_AMUX_LINE_IN,
 		}, {
 			.type     = EM28XX_VMUX_SVIDEO,
 			.vmux     = SAA7115_SVIDEO3,
-			.amux     = 1,
+			.amux     = EM28XX_AMUX_LINE_IN,
 		} },
 	},
 	[EM2821_BOARD_SUPERCOMP_USB_2] = {
@@ -339,15 +339,15 @@ struct em28xx_board em28xx_boards[] = {
 		.input          = { {
 			.type     = EM28XX_VMUX_TELEVISION,
 			.vmux     = SAA7115_COMPOSITE2,
-			.amux     = 1,
+			.amux     = EM28XX_AMUX_LINE_IN,
 		}, {
 			.type     = EM28XX_VMUX_COMPOSITE1,
 			.vmux     = SAA7115_COMPOSITE0,
-			.amux     = 0,
+			.amux     = EM28XX_AMUX_VIDEO,
 		}, {
 			.type     = EM28XX_VMUX_SVIDEO,
 			.vmux     = SAA7115_SVIDEO3,
-			.amux     = 1,
+			.amux     = EM28XX_AMUX_LINE_IN,
 		} },
 	},
 	[EM2821_BOARD_USBGEAR_VD204] = {
@@ -358,11 +358,11 @@ struct em28xx_board em28xx_boards[] = {
 		.input          = { {
 			.type  = EM28XX_VMUX_COMPOSITE1,
 			.vmux  = SAA7115_COMPOSITE0,
-			.amux  = 1,
+			.amux  = EM28XX_AMUX_LINE_IN,
 		}, {
 			.type  = EM28XX_VMUX_SVIDEO,
 			.vmux  = SAA7115_SVIDEO3,
-			.amux  = 1,
+			.amux  = EM28XX_AMUX_LINE_IN,
 		} },
 	},
 	[EM2860_BOARD_NETGMBH_CAM] = {
@@ -373,7 +373,7 @@ struct em28xx_board em28xx_boards[] = {
 		.input         = { {
 			.type     = EM28XX_VMUX_COMPOSITE1,
 			.vmux     = 0,
-			.amux     = 0,
+			.amux     = EM28XX_AMUX_VIDEO,
 		} },
 	},
 	[EM2860_BOARD_TYPHOON_DVD_MAKER] = {
@@ -384,11 +384,11 @@ struct em28xx_board em28xx_boards[] = {
 		.input          = { {
 			.type  = EM28XX_VMUX_COMPOSITE1,
 			.vmux  = SAA7115_COMPOSITE0,
-			.amux  = 1,
+			.amux  = EM28XX_AMUX_LINE_IN,
 		}, {
 			.type  = EM28XX_VMUX_SVIDEO,
 			.vmux  = SAA7115_SVIDEO3,
-			.amux  = 1,
+			.amux  = EM28XX_AMUX_LINE_IN,
 		} },
 	},
 	[EM2860_BOARD_GADMEI_UTV330] = {
@@ -401,15 +401,15 @@ struct em28xx_board em28xx_boards[] = {
 		.input          = { {
 			.type     = EM28XX_VMUX_TELEVISION,
 			.vmux     = SAA7115_COMPOSITE2,
-			.amux     = 0,
+			.amux     = EM28XX_AMUX_VIDEO,
 		}, {
 			.type     = EM28XX_VMUX_COMPOSITE1,
 			.vmux     = SAA7115_COMPOSITE0,
-			.amux     = 1,
+			.amux     = EM28XX_AMUX_LINE_IN,
 		}, {
 			.type     = EM28XX_VMUX_SVIDEO,
 			.vmux     = SAA7115_SVIDEO3,
-			.amux     = 1,
+			.amux     = EM28XX_AMUX_LINE_IN,
 		} },
 	},
 	[EM2860_BOARD_TERRATEC_HYBRID_XS] = {
@@ -421,15 +421,15 @@ struct em28xx_board em28xx_boards[] = {
 		.input          = { {
 			.type     = EM28XX_VMUX_TELEVISION,
 			.vmux     = TVP5150_COMPOSITE0,
-			.amux     = 0,
+			.amux     = EM28XX_AMUX_VIDEO,
 		}, {
 			.type     = EM28XX_VMUX_COMPOSITE1,
 			.vmux     = TVP5150_COMPOSITE1,
-			.amux     = 1,
+			.amux     = EM28XX_AMUX_LINE_IN,
 		}, {
 			.type     = EM28XX_VMUX_SVIDEO,
 			.vmux     = TVP5150_SVIDEO,
-			.amux     = 1,
+			.amux     = EM28XX_AMUX_LINE_IN,
 		} },
 	},
 	[EM2861_BOARD_KWORLD_PVRTV_300U] = {
@@ -441,15 +441,15 @@ struct em28xx_board em28xx_boards[] = {
 		.input          = { {
 			.type     = EM28XX_VMUX_TELEVISION,
 			.vmux     = TVP5150_COMPOSITE0,
-			.amux     = 0,
+			.amux     = EM28XX_AMUX_VIDEO,
 		}, {
 			.type     = EM28XX_VMUX_COMPOSITE1,
 			.vmux     = TVP5150_COMPOSITE1,
-			.amux     = 1,
+			.amux     = EM28XX_AMUX_LINE_IN,
 		}, {
 			.type     = EM28XX_VMUX_SVIDEO,
 			.vmux     = TVP5150_SVIDEO,
-			.amux     = 1,
+			.amux     = EM28XX_AMUX_LINE_IN,
 		} },
 	},
 	[EM2861_BOARD_YAKUMO_MOVIE_MIXER] = {
@@ -460,15 +460,15 @@ struct em28xx_board em28xx_boards[] = {
 		.input         = { {
 			.type     = EM28XX_VMUX_TELEVISION,
 			.vmux     = TVP5150_COMPOSITE0,
-			.amux     = 0,
+			.amux     = EM28XX_AMUX_VIDEO,
 		}, {
 			.type     = EM28XX_VMUX_COMPOSITE1,
 			.vmux     = TVP5150_COMPOSITE1,
-			.amux     = 1,
+			.amux     = EM28XX_AMUX_LINE_IN,
 		}, {
 			.type     = EM28XX_VMUX_SVIDEO,
 			.vmux     = TVP5150_SVIDEO,
-			.amux     = 1,
+			.amux     = EM28XX_AMUX_LINE_IN,
 		} },
 	},
 	[EM2861_BOARD_PLEXTOR_PX_TV100U] = {
@@ -481,15 +481,15 @@ struct em28xx_board em28xx_boards[] = {
 		.input          = { {
 			.type     = EM28XX_VMUX_TELEVISION,
 			.vmux     = TVP5150_COMPOSITE0,
-			.amux     = 1,
+			.amux     = EM28XX_AMUX_LINE_IN,
 		}, {
 			.type     = EM28XX_VMUX_COMPOSITE1,
 			.vmux     = TVP5150_COMPOSITE1,
-			.amux     = 1,
+			.amux     = EM28XX_AMUX_LINE_IN,
 		}, {
 			.type     = EM28XX_VMUX_SVIDEO,
 			.vmux     = TVP5150_SVIDEO,
-			.amux     = 1,
+			.amux     = EM28XX_AMUX_LINE_IN,
 		} },
 	},
 	[EM2870_BOARD_TERRATEC_XS] = {
@@ -531,15 +531,15 @@ struct em28xx_board em28xx_boards[] = {
 		.input          = { {
 			.type     = EM28XX_VMUX_TELEVISION,
 			.vmux     = TVP5150_COMPOSITE0,
-			.amux     = 0,
+			.amux     = EM28XX_AMUX_VIDEO,
 		}, {
 			.type     = EM28XX_VMUX_COMPOSITE1,
 			.vmux     = TVP5150_COMPOSITE1,
-			.amux     = 1,
+			.amux     = EM28XX_AMUX_LINE_IN,
 		}, {
 			.type     = EM28XX_VMUX_SVIDEO,
 			.vmux     = TVP5150_SVIDEO,
-			.amux     = 1,
+			.amux     = EM28XX_AMUX_LINE_IN,
 		} },
 	},
 	[EM2880_BOARD_HAUPPAUGE_WINTV_HVR_900] = {
@@ -553,15 +553,15 @@ struct em28xx_board em28xx_boards[] = {
 		.input          = { {
 			.type     = EM28XX_VMUX_TELEVISION,
 			.vmux     = TVP5150_COMPOSITE0,
-			.amux     = 0,
+			.amux     = EM28XX_AMUX_VIDEO,
 		}, {
 			.type     = EM28XX_VMUX_COMPOSITE1,
 			.vmux     = TVP5150_COMPOSITE1,
-			.amux     = 1,
+			.amux     = EM28XX_AMUX_LINE_IN,
 		}, {
 			.type     = EM28XX_VMUX_SVIDEO,
 			.vmux     = TVP5150_SVIDEO,
-			.amux     = 1,
+			.amux     = EM28XX_AMUX_LINE_IN,
 		} },
 	},
 	[EM2880_BOARD_HAUPPAUGE_WINTV_HVR_900_R2] = {
@@ -574,7 +574,7 @@ struct em28xx_board em28xx_boards[] = {
 		.input          = { {
 			.type     = EM28XX_VMUX_TELEVISION,
 			.vmux     = TVP5150_COMPOSITE0,
-			.amux     = 0,
+			.amux     = EM28XX_AMUX_VIDEO,
 		}, {
 			.type     = EM28XX_VMUX_COMPOSITE1,
 			.vmux     = TVP5150_COMPOSITE1,
@@ -582,7 +582,7 @@ struct em28xx_board em28xx_boards[] = {
 		}, {
 			.type     = EM28XX_VMUX_SVIDEO,
 			.vmux     = TVP5150_SVIDEO,
-			.amux     = 1,
+			.amux     = EM28XX_AMUX_LINE_IN,
 		} },
 	},
 	[EM2883_BOARD_HAUPPAUGE_WINTV_HVR_950] = {
@@ -593,19 +593,20 @@ struct em28xx_board em28xx_boards[] = {
 		.mts_firmware   = 1,
 		.has_12mhz_i2s  = 1,
 		.has_dvb        = 1,
+		.ir_codes       = ir_codes_hauppauge_new,
 		.decoder        = EM28XX_TVP5150,
 		.input          = { {
 			.type     = EM28XX_VMUX_TELEVISION,
 			.vmux     = TVP5150_COMPOSITE0,
-			.amux     = 0,
+			.amux     = EM28XX_AMUX_VIDEO,
 		}, {
 			.type     = EM28XX_VMUX_COMPOSITE1,
 			.vmux     = TVP5150_COMPOSITE1,
-			.amux     = 1,
+			.amux     = EM28XX_AMUX_LINE_IN,
 		}, {
 			.type     = EM28XX_VMUX_SVIDEO,
 			.vmux     = TVP5150_SVIDEO,
-			.amux     = 1,
+			.amux     = EM28XX_AMUX_LINE_IN,
 		} },
 	},
 	[EM2880_BOARD_PINNACLE_PCTV_HD_PRO] = {
@@ -616,19 +617,20 @@ struct em28xx_board em28xx_boards[] = {
 		.mts_firmware   = 1,
 		.has_12mhz_i2s  = 1,
 		.has_dvb        = 1,
+		.ir_codes       = ir_codes_pinnacle_pctv_hd,
 		.decoder        = EM28XX_TVP5150,
 		.input          = { {
 			.type     = EM28XX_VMUX_TELEVISION,
 			.vmux     = TVP5150_COMPOSITE0,
-			.amux     = 0,
+			.amux     = EM28XX_AMUX_VIDEO,
 		}, {
 			.type     = EM28XX_VMUX_COMPOSITE1,
 			.vmux     = TVP5150_COMPOSITE1,
-			.amux     = 1,
+			.amux     = EM28XX_AMUX_LINE_IN,
 		}, {
 			.type     = EM28XX_VMUX_SVIDEO,
 			.vmux     = TVP5150_SVIDEO,
-			.amux     = 1,
+			.amux     = EM28XX_AMUX_LINE_IN,
 		} },
 	},
 	[EM2880_BOARD_AMD_ATI_TV_WONDER_HD_600] = {
@@ -639,19 +641,20 @@ struct em28xx_board em28xx_boards[] = {
 		.mts_firmware   = 1,
 		.has_12mhz_i2s  = 1,
 		.has_dvb        = 1,
+		.ir_codes       = ir_codes_ati_tv_wonder_hd_600,
 		.decoder        = EM28XX_TVP5150,
 		.input          = { {
 			.type     = EM28XX_VMUX_TELEVISION,
 			.vmux     = TVP5150_COMPOSITE0,
-			.amux     = 0,
+			.amux     = EM28XX_AMUX_VIDEO,
 		}, {
 			.type     = EM28XX_VMUX_COMPOSITE1,
 			.vmux     = TVP5150_COMPOSITE1,
-			.amux     = 1,
+			.amux     = EM28XX_AMUX_LINE_IN,
 		}, {
 			.type     = EM28XX_VMUX_SVIDEO,
 			.vmux     = TVP5150_SVIDEO,
-			.amux     = 1,
+			.amux     = EM28XX_AMUX_LINE_IN,
 		} },
 	},
 	[EM2880_BOARD_TERRATEC_HYBRID_XS] = {
@@ -664,15 +667,15 @@ struct em28xx_board em28xx_boards[] = {
 		.input          = { {
 			.type     = EM28XX_VMUX_TELEVISION,
 			.vmux     = TVP5150_COMPOSITE0,
-			.amux     = 0,
+			.amux     = EM28XX_AMUX_VIDEO,
 		}, {
 			.type     = EM28XX_VMUX_COMPOSITE1,
 			.vmux     = TVP5150_COMPOSITE1,
-			.amux     = 1,
+			.amux     = EM28XX_AMUX_LINE_IN,
 		}, {
 			.type     = EM28XX_VMUX_SVIDEO,
 			.vmux     = TVP5150_SVIDEO,
-			.amux     = 1,
+			.amux     = EM28XX_AMUX_LINE_IN,
 		} },
 	},
 	/* maybe there's a reason behind it why Terratec sells the Hybrid XS
@@ -687,15 +690,15 @@ struct em28xx_board em28xx_boards[] = {
 		.input          = { {
 			.type     = EM28XX_VMUX_TELEVISION,
 			.vmux     = TVP5150_COMPOSITE0,
-			.amux     = 0,
+			.amux     = EM28XX_AMUX_VIDEO,
 		}, {
 			.type     = EM28XX_VMUX_COMPOSITE1,
 			.vmux     = TVP5150_COMPOSITE1,
-			.amux     = 1,
+			.amux     = EM28XX_AMUX_LINE_IN,
 		}, {
 			.type     = EM28XX_VMUX_SVIDEO,
 			.vmux     = TVP5150_SVIDEO,
-			.amux     = 1,
+			.amux     = EM28XX_AMUX_LINE_IN,
 		} },
 	},
 	[EM2820_BOARD_MSI_VOX_USB_2] = {
@@ -711,15 +714,15 @@ struct em28xx_board em28xx_boards[] = {
 		.input             = { {
 			.type      = EM28XX_VMUX_TELEVISION,
 			.vmux      = SAA7115_COMPOSITE4,
-			.amux      = 0,
+			.amux      = EM28XX_AMUX_VIDEO,
 		}, {
 			.type      = EM28XX_VMUX_COMPOSITE1,
 			.vmux      = SAA7115_COMPOSITE0,
-			.amux      = 1,
+			.amux      = EM28XX_AMUX_LINE_IN,
 		}, {
 			.type      = EM28XX_VMUX_SVIDEO,
 			.vmux      = SAA7115_SVIDEO3,
-			.amux      = 1,
+			.amux      = EM28XX_AMUX_LINE_IN,
 		} },
 	},
 	[EM2800_BOARD_TERRATEC_CINERGY_200] = {
@@ -732,15 +735,15 @@ struct em28xx_board em28xx_boards[] = {
 		.input          = { {
 			.type     = EM28XX_VMUX_TELEVISION,
 			.vmux     = SAA7115_COMPOSITE2,
-			.amux     = 0,
+			.amux     = EM28XX_AMUX_VIDEO,
 		}, {
 			.type     = EM28XX_VMUX_COMPOSITE1,
 			.vmux     = SAA7115_COMPOSITE0,
-			.amux     = 1,
+			.amux     = EM28XX_AMUX_LINE_IN,
 		}, {
 			.type     = EM28XX_VMUX_SVIDEO,
 			.vmux     = SAA7115_SVIDEO3,
-			.amux     = 1,
+			.amux     = EM28XX_AMUX_LINE_IN,
 		} },
 	},
 	[EM2800_BOARD_GRABBEEX_USB2800] = {
@@ -751,11 +754,11 @@ struct em28xx_board em28xx_boards[] = {
 		.input          = { {
 			.type     = EM28XX_VMUX_COMPOSITE1,
 			.vmux     = SAA7115_COMPOSITE0,
-			.amux     = 1,
+			.amux     = EM28XX_AMUX_LINE_IN,
 		}, {
 			.type     = EM28XX_VMUX_SVIDEO,
 			.vmux     = SAA7115_SVIDEO3,
-			.amux     = 1,
+			.amux     = EM28XX_AMUX_LINE_IN,
 		} },
 	},
 	[EM2800_BOARD_LEADTEK_WINFAST_USBII] = {
@@ -768,15 +771,15 @@ struct em28xx_board em28xx_boards[] = {
 		.input          = { {
 			.type     = EM28XX_VMUX_TELEVISION,
 			.vmux     = SAA7115_COMPOSITE2,
-			.amux     = 0,
+			.amux     = EM28XX_AMUX_VIDEO,
 		}, {
 			.type     = EM28XX_VMUX_COMPOSITE1,
 			.vmux     = SAA7115_COMPOSITE0,
-			.amux     = 1,
+			.amux     = EM28XX_AMUX_LINE_IN,
 		}, {
 			.type     = EM28XX_VMUX_SVIDEO,
 			.vmux     = SAA7115_SVIDEO3,
-			.amux     = 1,
+			.amux     = EM28XX_AMUX_LINE_IN,
 		} },
 	},
 	[EM2800_BOARD_KWORLD_USB2800] = {
@@ -789,15 +792,15 @@ struct em28xx_board em28xx_boards[] = {
 		.input          = { {
 			.type     = EM28XX_VMUX_TELEVISION,
 			.vmux     = SAA7115_COMPOSITE2,
-			.amux     = 0,
+			.amux     = EM28XX_AMUX_VIDEO,
 		}, {
 			.type     = EM28XX_VMUX_COMPOSITE1,
 			.vmux     = SAA7115_COMPOSITE0,
-			.amux     = 1,
+			.amux     = EM28XX_AMUX_LINE_IN,
 		}, {
 			.type     = EM28XX_VMUX_SVIDEO,
 			.vmux     = SAA7115_SVIDEO3,
-			.amux     = 1,
+			.amux     = EM28XX_AMUX_LINE_IN,
 		} },
 	},
 	[EM2820_BOARD_PINNACLE_DVC_90] = {
@@ -808,11 +811,11 @@ struct em28xx_board em28xx_boards[] = {
 		.input          = { {
 			.type     = EM28XX_VMUX_COMPOSITE1,
 			.vmux     = SAA7115_COMPOSITE0,
-			.amux     = 1,
+			.amux     = EM28XX_AMUX_LINE_IN,
 		}, {
 			.type     = EM28XX_VMUX_SVIDEO,
 			.vmux     = SAA7115_SVIDEO3,
-			.amux     = 1,
+			.amux     = EM28XX_AMUX_LINE_IN,
 		} },
 	},
 	[EM2800_BOARD_VGEAR_POCKETTV] = {
@@ -825,15 +828,15 @@ struct em28xx_board em28xx_boards[] = {
 		.input          = { {
 			.type     = EM28XX_VMUX_TELEVISION,
 			.vmux     = SAA7115_COMPOSITE2,
-			.amux     = 0,
+			.amux     = EM28XX_AMUX_VIDEO,
 		}, {
 			.type     = EM28XX_VMUX_COMPOSITE1,
 			.vmux     = SAA7115_COMPOSITE0,
-			.amux     = 1,
+			.amux     = EM28XX_AMUX_LINE_IN,
 		}, {
 			.type     = EM28XX_VMUX_SVIDEO,
 			.vmux     = SAA7115_SVIDEO3,
-			.amux     = 1,
+			.amux     = EM28XX_AMUX_LINE_IN,
 		} },
 	},
 	[EM2820_BOARD_PROLINK_PLAYTV_USB2] = {
@@ -866,7 +869,7 @@ struct em28xx_board em28xx_boards[] = {
 		.input          = { {
 			.type     = EM28XX_VMUX_SVIDEO,
 			.vmux     = SAA7115_SVIDEO3,
-			.amux     = 0,
+			.amux     = EM28XX_AMUX_VIDEO,
 		} },
 	},
 	[EM2880_BOARD_MSI_DIGIVOX_AD] = {
@@ -878,15 +881,15 @@ struct em28xx_board em28xx_boards[] = {
 		.input          = { {
 			.type     = EM28XX_VMUX_TELEVISION,
 			.vmux     = TVP5150_COMPOSITE0,
-			.amux     = 0,
+			.amux     = EM28XX_AMUX_VIDEO,
 		}, {
 			.type     = EM28XX_VMUX_COMPOSITE1,
 			.vmux     = TVP5150_COMPOSITE1,
-			.amux     = 1,
+			.amux     = EM28XX_AMUX_LINE_IN,
 		}, {
 			.type     = EM28XX_VMUX_SVIDEO,
 			.vmux     = TVP5150_SVIDEO,
-			.amux     = 1,
+			.amux     = EM28XX_AMUX_LINE_IN,
 		} },
 	},
 	[EM2880_BOARD_MSI_DIGIVOX_AD_II] = {
@@ -898,15 +901,15 @@ struct em28xx_board em28xx_boards[] = {
 		.input          = { {
 			.type     = EM28XX_VMUX_TELEVISION,
 			.vmux     = TVP5150_COMPOSITE0,
-			.amux     = 0,
+			.amux     = EM28XX_AMUX_VIDEO,
 		}, {
 			.type     = EM28XX_VMUX_COMPOSITE1,
 			.vmux     = TVP5150_COMPOSITE1,
-			.amux     = 1,
+			.amux     = EM28XX_AMUX_LINE_IN,
 		}, {
 			.type     = EM28XX_VMUX_SVIDEO,
 			.vmux     = TVP5150_SVIDEO,
-			.amux     = 1,
+			.amux     = EM28XX_AMUX_LINE_IN,
 		} },
 	},
 	[EM2880_BOARD_KWORLD_DVB_305U] = {
@@ -918,15 +921,15 @@ struct em28xx_board em28xx_boards[] = {
 		.input          = { {
 			.type     = EM28XX_VMUX_TELEVISION,
 			.vmux     = TVP5150_COMPOSITE0,
-			.amux     = 0,
+			.amux     = EM28XX_AMUX_VIDEO,
 		}, {
 			.type     = EM28XX_VMUX_COMPOSITE1,
 			.vmux     = TVP5150_COMPOSITE1,
-			.amux     = 1,
+			.amux     = EM28XX_AMUX_LINE_IN,
 		}, {
 			.type     = EM28XX_VMUX_SVIDEO,
 			.vmux     = TVP5150_SVIDEO,
-			.amux     = 1,
+			.amux     = EM28XX_AMUX_LINE_IN,
 		} },
 	},
 	[EM2880_BOARD_KWORLD_DVB_310U] = {
@@ -943,11 +946,11 @@ struct em28xx_board em28xx_boards[] = {
 		}, {
 			.type     = EM28XX_VMUX_COMPOSITE1,
 			.vmux     = TVP5150_COMPOSITE1,
-			.amux     = EM28XX_AMUX_AC97_LINE_IN,
+			.amux     = EM28XX_AMUX_LINE_IN,
 		}, {	/* S-video has not been tested yet */
 			.type     = EM28XX_VMUX_SVIDEO,
 			.vmux     = TVP5150_SVIDEO,
-			.amux     = EM28XX_AMUX_AC97_LINE_IN,
+			.amux     = EM28XX_AMUX_LINE_IN,
 		} },
 	},
 	[EM2881_BOARD_DNT_DA2_HYBRID] = {
@@ -959,15 +962,15 @@ struct em28xx_board em28xx_boards[] = {
 		.input          = { {
 			.type     = EM28XX_VMUX_TELEVISION,
 			.vmux     = TVP5150_COMPOSITE0,
-			.amux     = 0,
+			.amux     = EM28XX_AMUX_VIDEO,
 		}, {
 			.type     = EM28XX_VMUX_COMPOSITE1,
 			.vmux     = TVP5150_COMPOSITE1,
-			.amux     = 1,
+			.amux     = EM28XX_AMUX_LINE_IN,
 		}, {
 			.type     = EM28XX_VMUX_SVIDEO,
 			.vmux     = TVP5150_SVIDEO,
-			.amux     = 1,
+			.amux     = EM28XX_AMUX_LINE_IN,
 		} },
 	},
 	[EM2881_BOARD_PINNACLE_HYBRID_PRO] = {
@@ -979,15 +982,15 @@ struct em28xx_board em28xx_boards[] = {
 		.input          = { {
 			.type     = EM28XX_VMUX_TELEVISION,
 			.vmux     = TVP5150_COMPOSITE0,
-			.amux     = 0,
+			.amux     = EM28XX_AMUX_VIDEO,
 		}, {
 			.type     = EM28XX_VMUX_COMPOSITE1,
 			.vmux     = TVP5150_COMPOSITE1,
-			.amux     = 1,
+			.amux     = EM28XX_AMUX_LINE_IN,
 		}, {
 			.type     = EM28XX_VMUX_SVIDEO,
 			.vmux     = TVP5150_SVIDEO,
-			.amux     = 1,
+			.amux     = EM28XX_AMUX_LINE_IN,
 		} },
 	},
 	[EM2882_BOARD_PINNACLE_HYBRID_PRO] = {
@@ -1000,15 +1003,15 @@ struct em28xx_board em28xx_boards[] = {
 		.input          = { {
 			.type     = EM28XX_VMUX_TELEVISION,
 			.vmux     = TVP5150_COMPOSITE0,
-			.amux     = 0,
+			.amux     = EM28XX_AMUX_VIDEO,
 		}, {
 			.type     = EM28XX_VMUX_COMPOSITE1,
 			.vmux     = TVP5150_COMPOSITE1,
-			.amux     = 1,
+			.amux     = EM28XX_AMUX_LINE_IN,
 		}, {
 			.type     = EM28XX_VMUX_SVIDEO,
 			.vmux     = TVP5150_SVIDEO,
-			.amux     = 1,
+			.amux     = EM28XX_AMUX_LINE_IN,
 		} },
 	},
 	[EM2882_BOARD_KWORLD_VS_DVBT] = {
@@ -1020,15 +1023,15 @@ struct em28xx_board em28xx_boards[] = {
 		.input          = { {
 			.type     = EM28XX_VMUX_TELEVISION,
 			.vmux     = TVP5150_COMPOSITE0,
-			.amux     = 0,
+			.amux     = EM28XX_AMUX_VIDEO,
 		}, {
 			.type     = EM28XX_VMUX_COMPOSITE1,
 			.vmux     = TVP5150_COMPOSITE1,
-			.amux     = 1,
+			.amux     = EM28XX_AMUX_LINE_IN,
 		}, {
 			.type     = EM28XX_VMUX_SVIDEO,
 			.vmux     = TVP5150_SVIDEO,
-			.amux     = 1,
+			.amux     = EM28XX_AMUX_LINE_IN,
 		} },
 	},
 	[EM2882_BOARD_TERRATEC_HYBRID_XS] = {
@@ -1040,15 +1043,15 @@ struct em28xx_board em28xx_boards[] = {
 		.input          = { {
 			.type     = EM28XX_VMUX_TELEVISION,
 			.vmux     = TVP5150_COMPOSITE0,
-			.amux     = 0,
+			.amux     = EM28XX_AMUX_VIDEO,
 		}, {
 			.type     = EM28XX_VMUX_COMPOSITE1,
 			.vmux     = TVP5150_COMPOSITE1,
-			.amux     = 1,
+			.amux     = EM28XX_AMUX_LINE_IN,
 		}, {
 			.type     = EM28XX_VMUX_SVIDEO,
 			.vmux     = TVP5150_SVIDEO,
-			.amux     = 1,
+			.amux     = EM28XX_AMUX_LINE_IN,
 		} },
 	},
 	[EM2883_BOARD_KWORLD_HYBRID_A316] = {
@@ -1061,15 +1064,15 @@ struct em28xx_board em28xx_boards[] = {
 		.input          = { {
 			.type     = EM28XX_VMUX_TELEVISION,
 			.vmux     = TVP5150_COMPOSITE0,
-			.amux     = 0,
+			.amux     = EM28XX_AMUX_VIDEO,
 		}, {
 			.type     = EM28XX_VMUX_COMPOSITE1,
 			.vmux     = TVP5150_COMPOSITE1,
-			.amux     = 1,
+			.amux     = EM28XX_AMUX_LINE_IN,
 		}, {
 			.type     = EM28XX_VMUX_SVIDEO,
 			.vmux     = TVP5150_SVIDEO,
-			.amux     = 1,
+			.amux     = EM28XX_AMUX_LINE_IN,
 		} },
 	},
 	[EM2820_BOARD_COMPRO_VIDEOMATE_FORYOU] = {
@@ -1088,6 +1091,21 @@ struct em28xx_board em28xx_boards[] = {
 			.amux     = EM28XX_AMUX_LINE_IN,
 		} },
 	},
+	[EM2874_BOARD_PINNACLE_PCTV_80E] = {
+		.name         = "Pinnacle PCTV HD Mini",
+		.vchannels    = 0,
+		.tuner_type   = TUNER_ABSENT,
+		.has_dvb        = 1,
+		.ir_codes       = ir_codes_pinnacle_pctv_hd,
+		.decoder      = EM28XX_NODECODER,
+#ifdef DJH_DEBUG
+		.input          = { {
+			.type     = EM28XX_VMUX_TELEVISION,
+			.vmux     = TVP5150_COMPOSITE0,
+			.amux     = EM28XX_AMUX_LINE_IN,
+		} },
+#endif
+	},
 };
 const unsigned int em28xx_bcount = ARRAY_SIZE(em28xx_boards);
 
@@ -1185,6 +1203,8 @@ struct usb_device_id em28xx_id_table [] = {
 			.driver_info = EM2882_BOARD_PINNACLE_HYBRID_PRO },
 	{ USB_DEVICE(0x2304, 0x0227),
 			.driver_info = EM2880_BOARD_PINNACLE_PCTV_HD_PRO },
+	{ USB_DEVICE(0x2304, 0x023f),
+			.driver_info = EM2874_BOARD_PINNACLE_PCTV_80E },
 	{ USB_DEVICE(0x0413, 0x6023),
 			.driver_info = EM2800_BOARD_LEADTEK_WINFAST_USBII },
 	{ USB_DEVICE(0x093b, 0xa005),
@@ -1260,6 +1280,17 @@ static struct em28xx_reg_seq em2882_terratec_hybrid_xs_digital[] = {
 	{  -1,			-1,	-1,		  -1},
 };
 
+/* Pinnacle PCTV HD Mini (80e) GPIOs
+   0-5: not used
+   6:   demod reset, active low
+   7:   LED on, active high */
+static struct em28xx_reg_seq em2874_pinnacle_80e_digital[] = {
+	{EM28XX_R06_I2C_CLK,    0x45,   0xff,		  10}, /*400 KHz*/
+	{EM2874_R80_GPIO,       0x80,   0xff,		  100},/*Demod reset*/
+	{EM2874_R80_GPIO,       0xc0,   0xff,		  10},
+	{  -1,			-1,	-1,		  -1},
+};
+
 /*
  * EEPROM hash table for devices with generic USB IDs
  */
@@ -1307,6 +1338,7 @@ static void em28xx_set_model(struct em28xx *dev)
 	dev->max_range_640_480 = em28xx_boards[dev->model].max_range_640_480;
 	dev->has_dvb = em28xx_boards[dev->model].has_dvb;
 	dev->has_snapshot_button = em28xx_boards[dev->model].has_snapshot_button;
+	dev->ir_codes = em28xx_boards[dev->model].ir_codes;
 	dev->valid = em28xx_boards[dev->model].valid;
 }
 
@@ -1317,17 +1349,34 @@ void em28xx_pre_card_setup(struct em28xx *dev)
 {
 	int rc;
 
-	rc = em28xx_read_reg(dev, EM2880_R04_GPO);
-	if (rc >= 0)
-		dev->reg_gpo = rc;
+	/* Set the default GPO/GPIO for legacy devices */
+	dev->reg_gpo_num = EM2880_R04_GPO;
+	dev->reg_gpio_num = EM28XX_R08_GPIO;
 
 	dev->wait_after_write = 5;
+
+	/* Based on the Chip ID, set the device configuration */
 	rc = em28xx_read_reg(dev, EM28XX_R0A_CHIPID);
 	if (rc > 0) {
+		dev->chip_id = rc;
 		switch (rc) {
+		case CHIP_ID_EM2750:
+			em28xx_info("chip ID is em2750\n");
+			break;
+		case CHIP_ID_EM2820:
+			em28xx_info("chip ID is em2820\n");
+			break;
+		case CHIP_ID_EM2840:
+			em28xx_info("chip ID is em2840\n");
+			break;
 		case CHIP_ID_EM2860:
 			em28xx_info("chip ID is em2860\n");
 			break;
+		case CHIP_ID_EM2874:
+			em28xx_info("chip ID is em2874\n");
+			dev->reg_gpio_num = EM2874_R80_GPIO;
+			dev->wait_after_write = 0;
+			break;
 		case CHIP_ID_EM2883:
 			em28xx_info("chip ID is em2882/em2883\n");
 			dev->wait_after_write = 0;
@@ -1336,6 +1385,12 @@ void em28xx_pre_card_setup(struct em28xx *dev)
 			em28xx_info("em28xx chip ID = %d\n", rc);
 		}
 	}
+
+	/* Prepopulate cached GPO register content */
+	rc = em28xx_read_reg(dev, dev->reg_gpo_num);
+	if (rc >= 0)
+		dev->reg_gpo = rc;
+
 	em28xx_set_model(dev);
 
 	/* request some modules */
@@ -1350,7 +1405,9 @@ void em28xx_pre_card_setup(struct em28xx *dev)
 	case EM2883_BOARD_KWORLD_HYBRID_A316:
 	case EM2880_BOARD_AMD_ATI_TV_WONDER_HD_600:
 		em28xx_write_regs(dev, EM28XX_R0F_XCLK,    "\x27", 1);
-		em28xx_write_regs(dev, EM28XX_R06_I2C_CLK, "\x40", 1);
+		em28xx_write_reg(dev, EM28XX_R06_I2C_CLK,
+				 EM28XX_I2C_CLK_WAIT_ENABLE |
+				 EM28XX_I2C_FREQ_100_KHZ);
 		msleep(50);
 
 		/* Sets GPO/GPIO sequences for this device */
@@ -1362,7 +1419,9 @@ void em28xx_pre_card_setup(struct em28xx *dev)
 
 	case EM2882_BOARD_TERRATEC_HYBRID_XS:
 		em28xx_write_regs(dev, EM28XX_R0F_XCLK,    "\x27", 1);
-		em28xx_write_regs(dev, EM28XX_R06_I2C_CLK, "\x40", 1);
+		em28xx_write_reg(dev, EM28XX_R06_I2C_CLK,
+				 EM28XX_I2C_CLK_WAIT_ENABLE |
+				 EM28XX_I2C_FREQ_100_KHZ);
 		msleep(50);
 
 		/* should be added ir_codes here */
@@ -1382,7 +1441,9 @@ void em28xx_pre_card_setup(struct em28xx *dev)
 	case EM2870_BOARD_KWORLD_350U:
 	case EM2881_BOARD_DNT_DA2_HYBRID:
 		em28xx_write_regs(dev, EM28XX_R0F_XCLK,    "\x27", 1);
-		em28xx_write_regs(dev, EM28XX_R06_I2C_CLK, "\x40", 1);
+		em28xx_write_reg(dev, EM28XX_R06_I2C_CLK,
+				 EM28XX_I2C_CLK_WAIT_ENABLE |
+				 EM28XX_I2C_FREQ_100_KHZ);
 		msleep(50);
 
 		/* NOTE: EM2881_DNT_DA2_HYBRID spend 140 msleep for digital
@@ -1399,7 +1460,9 @@ void em28xx_pre_card_setup(struct em28xx *dev)
 	case EM2880_BOARD_MSI_DIGIVOX_AD:
 	case EM2880_BOARD_MSI_DIGIVOX_AD_II:
 		em28xx_write_regs(dev, EM28XX_R0F_XCLK,    "\x27", 1);
-		em28xx_write_regs(dev, EM28XX_R06_I2C_CLK, "\x40", 1);
+		em28xx_write_reg(dev, EM28XX_R06_I2C_CLK,
+				 EM28XX_I2C_CLK_WAIT_ENABLE |
+				 EM28XX_I2C_FREQ_100_KHZ);
 		msleep(50);
 
 		/* Sets GPO/GPIO sequences for this device */
@@ -1416,7 +1479,9 @@ void em28xx_pre_card_setup(struct em28xx *dev)
 
 	case EM2861_BOARD_PLEXTOR_PX_TV100U:
 		em28xx_write_regs(dev, EM28XX_R0F_XCLK, "\x27", 1);
-		em28xx_write_regs(dev, EM28XX_R06_I2C_CLK, "\x40", 1);
+		em28xx_write_reg(dev, EM28XX_R06_I2C_CLK,
+				 EM28XX_I2C_CLK_WAIT_ENABLE |
+				 EM28XX_I2C_FREQ_100_KHZ);
 		/* FIXME guess */
 		/* Turn on analog audio output */
 		em28xx_write_regs_req(dev, 0x00, 0x08, "\xfd", 1);
@@ -1425,7 +1490,9 @@ void em28xx_pre_card_setup(struct em28xx *dev)
 	case EM2861_BOARD_KWORLD_PVRTV_300U:
 	case EM2880_BOARD_KWORLD_DVB_305U:
 		em28xx_write_regs(dev, EM28XX_R0F_XCLK, "\x27", 1);
-		em28xx_write_regs(dev, EM28XX_R06_I2C_CLK, "\x4c", 1);
+		em28xx_write_reg(dev, EM28XX_R06_I2C_CLK,
+				 EM28XX_I2C_CLK_WAIT_ENABLE |
+				 EM28XX_I2C_FREQ_100_KHZ);
 		msleep(10);
 		em28xx_write_regs(dev, 0x08, "\x6d", 1);
 		msleep(10);
@@ -1435,7 +1502,9 @@ void em28xx_pre_card_setup(struct em28xx *dev)
 
 	case EM2870_BOARD_KWORLD_355U:
 		em28xx_write_regs(dev, EM28XX_R0F_XCLK, "\x27", 1);
-		em28xx_write_regs(dev, EM28XX_R06_I2C_CLK, "\x40", 1);
+		em28xx_write_reg(dev, EM28XX_R06_I2C_CLK,
+				 EM28XX_I2C_CLK_WAIT_ENABLE |
+				 EM28XX_I2C_FREQ_100_KHZ);
 		msleep(50);
 
 		/* Sets GPO/GPIO sequences for this device */
@@ -1444,7 +1513,9 @@ void em28xx_pre_card_setup(struct em28xx *dev)
 
 	case EM2870_BOARD_COMPRO_VIDEOMATE:
 		em28xx_write_regs(dev, EM28XX_R0F_XCLK, "\x27", 1);
-		em28xx_write_regs(dev, EM28XX_R06_I2C_CLK, "\x40", 1);
+		em28xx_write_reg(dev, EM28XX_R06_I2C_CLK,
+				 EM28XX_I2C_CLK_WAIT_ENABLE |
+				 EM28XX_I2C_FREQ_100_KHZ);
 		/* TODO: someone can do some cleanup here...
 			 not everything's needed */
 		em28xx_write_regs(dev, 0x04, "\x00", 1);
@@ -1463,7 +1534,9 @@ void em28xx_pre_card_setup(struct em28xx *dev)
 
 	case EM2870_BOARD_TERRATEC_XS_MT2060:
 		em28xx_write_regs(dev, EM28XX_R0F_XCLK, "\x27", 1);
-		em28xx_write_regs(dev, EM28XX_R06_I2C_CLK, "\x40", 1);
+		em28xx_write_reg(dev, EM28XX_R06_I2C_CLK,
+				 EM28XX_I2C_CLK_WAIT_ENABLE |
+				 EM28XX_I2C_FREQ_100_KHZ);
 		/* this device needs some gpio writes to get the DVB-T
 		   demod work */
 		em28xx_write_regs(dev, 0x08, "\xfe", 1);
@@ -1475,7 +1548,10 @@ void em28xx_pre_card_setup(struct em28xx *dev)
 		break;
 
 	case EM2870_BOARD_PINNACLE_PCTV_DVB:
-		em28xx_write_regs(dev, EM28XX_R06_I2C_CLK, "\x40", 1);
+		em28xx_write_reg(dev, EM28XX_R06_I2C_CLK,
+				 EM28XX_I2C_CLK_WAIT_ENABLE |
+				 EM28XX_I2C_FREQ_100_KHZ);
+
 		/* this device needs some gpio writes to get the
 		   DVB-T demod work */
 		em28xx_write_regs(dev, 0x08, "\xfe", 1);
@@ -1491,7 +1567,9 @@ void em28xx_pre_card_setup(struct em28xx *dev)
 
 	case EM2820_BOARD_GADMEI_UTV310:
 		em28xx_write_regs(dev, EM28XX_R0F_XCLK, "\x27", 1);
-		em28xx_write_regs(dev, EM28XX_R06_I2C_CLK, "\x40", 1);
+		em28xx_write_reg(dev, EM28XX_R06_I2C_CLK,
+				 EM28XX_I2C_CLK_WAIT_ENABLE |
+				 EM28XX_I2C_FREQ_100_KHZ);
 		/* Turn on analog audio output */
 		em28xx_write_regs_req(dev, 0x00, 0x08, "\xfd", 1);
 		break;
@@ -1499,16 +1577,30 @@ void em28xx_pre_card_setup(struct em28xx *dev)
 	case EM2860_BOARD_GADMEI_UTV330:
 		/* Turn on IR */
 		em28xx_write_regs(dev, EM28XX_R0F_XCLK, "\x07", 1);
-		em28xx_write_regs(dev, EM28XX_R06_I2C_CLK, "\x40", 1);
+		em28xx_write_reg(dev, EM28XX_R06_I2C_CLK,
+				 EM28XX_I2C_CLK_WAIT_ENABLE |
+				 EM28XX_I2C_FREQ_100_KHZ);
 		/* should be added ir_codes here */
 		break;
 
 	case EM2820_BOARD_MSI_VOX_USB_2:
 		em28xx_write_regs(dev, EM28XX_R0F_XCLK, "\x27", 1);
-		em28xx_write_regs(dev, EM28XX_R06_I2C_CLK, "\x40", 1);
+		em28xx_write_reg(dev, EM28XX_R06_I2C_CLK,
+				 EM28XX_I2C_CLK_WAIT_ENABLE |
+				 EM28XX_I2C_FREQ_100_KHZ);
 		/* enables audio for that device */
 		em28xx_write_regs_req(dev, 0x00, 0x08, "\xfd", 1);
 		break;
+
+	case EM2874_BOARD_PINNACLE_PCTV_80E:
+		/* Set 400 KHz clock and select secondary i2c bus */
+		em28xx_write_reg(dev, EM28XX_R06_I2C_CLK,
+				 EM28XX_I2C_CLK_WAIT_ENABLE |
+				 EM2874_I2C_SECONDARY_BUS_SELECT |
+				 EM28XX_I2C_FREQ_400_KHZ);
+
+		dev->digital_gpio = em2874_pinnacle_80e_digital;
+		break;
 	}
 
 	em28xx_gpio_set(dev, dev->tun_analog_gpio);
@@ -1717,6 +1809,7 @@ void em28xx_card_setup(struct em28xx *dev)
 	em28xx_set_model(dev);
 
 	dev->tuner_type = em28xx_boards[dev->model].tuner_type;
+	dev->tuner_addr = em28xx_boards[dev->model].tuner_addr;
 
 	/* request some modules */
 	switch (dev->model) {
@@ -1800,4 +1893,6 @@ void em28xx_card_setup(struct em28xx *dev)
 #endif
 
 	em28xx_config_tuner(dev);
+
+	em28xx_ir_init(dev);
 }
diff --git a/linux/drivers/media/video/em28xx/em28xx-core.c b/linux/drivers/media/video/em28xx/em28xx-core.c
index 1a30e361c..dacb6cc5a 100644
--- a/linux/drivers/media/video/em28xx/em28xx-core.c
+++ b/linux/drivers/media/video/em28xx/em28xx-core.c
@@ -69,19 +69,33 @@ int em28xx_read_reg_req_len(struct em28xx *dev, u8 req, u16 reg,
 	int ret, byte;
 
 	if (dev->state & DEV_DISCONNECTED)
-		return(-ENODEV);
+		return -ENODEV;
+
+	if (len > URB_MAX_CTRL_SIZE)
+		return -EINVAL;
 
 	em28xx_regdbg("req=%02x, reg=%02x ", req, reg);
 
+	mutex_lock(&dev->ctrl_urb_lock);
 	ret = usb_control_msg(dev->udev, usb_rcvctrlpipe(dev->udev, 0), req,
 			      USB_DIR_IN | USB_TYPE_VENDOR | USB_RECIP_DEVICE,
-			      0x0000, reg, buf, len, HZ);
+			      0x0000, reg, dev->urb_buf, len, HZ);
+	if (ret < 0) {
+		if (reg_debug)
+			printk(" failed!\n");
+		mutex_unlock(&dev->ctrl_urb_lock);
+		return ret;
+	}
+
+	if (len)
+		memcpy(buf, dev->urb_buf, len);
+
+	mutex_unlock(&dev->ctrl_urb_lock);
 
 	if (reg_debug) {
-		printk(ret < 0 ? " failed!\n" : "%02x values: ", ret);
+		printk("%02x values: ", ret);
 		for (byte = 0; byte < len; byte++)
 			printk(" %02x", (unsigned char)buf[byte]);
-
 		printk("\n");
 	}
 
@@ -102,16 +116,20 @@ int em28xx_read_reg_req(struct em28xx *dev, u8 req, u16 reg)
 
 	em28xx_regdbg("req=%02x, reg=%02x:", req, reg);
 
+	mutex_lock(&dev->ctrl_urb_lock);
 	ret = usb_control_msg(dev->udev, usb_rcvctrlpipe(dev->udev, 0), req,
 			      USB_DIR_IN | USB_TYPE_VENDOR | USB_RECIP_DEVICE,
-			      0x0000, reg, &val, 1, HZ);
+			      0x0000, reg, dev->urb_buf, 1, HZ);
+	val = dev->urb_buf[0];
+	mutex_unlock(&dev->ctrl_urb_lock);
 
-	if (reg_debug)
-		printk(ret < 0 ? " failed!\n" :
-				 "%02x\n", (unsigned char) val);
-
-	if (ret < 0)
+	if (ret < 0) {
+		printk(" failed!\n");
 		return ret;
+	}
+
+	if (reg_debug)
+		printk("%02x\n", (unsigned char) val);
 
 	return val;
 }
@@ -130,19 +148,13 @@ int em28xx_write_regs_req(struct em28xx *dev, u8 req, u16 reg, char *buf,
 {
 	int ret;
 
-	/*usb_control_msg seems to expect a kmalloced buffer */
-	unsigned char *bufs;
-
 	if (dev->state & DEV_DISCONNECTED)
 		return -ENODEV;
 
-	if (len < 1)
+	if ((len < 1) || (len > URB_MAX_CTRL_SIZE))
 		return -EINVAL;
 
-	bufs = kmalloc(len, GFP_KERNEL);
-
 	em28xx_regdbg("req=%02x reg=%02x:", req, reg);
-
 	if (reg_debug) {
 		int i;
 		for (i = 0; i < len; ++i)
@@ -150,16 +162,16 @@ int em28xx_write_regs_req(struct em28xx *dev, u8 req, u16 reg, char *buf,
 		printk("\n");
 	}
 
-	if (!bufs)
-		return -ENOMEM;
-	memcpy(bufs, buf, len);
+	mutex_lock(&dev->ctrl_urb_lock);
+	memcpy(dev->urb_buf, buf, len);
 	ret = usb_control_msg(dev->udev, usb_sndctrlpipe(dev->udev, 0), req,
 			      USB_DIR_OUT | USB_TYPE_VENDOR | USB_RECIP_DEVICE,
-			      0x0000, reg, bufs, len, HZ);
+			      0x0000, reg, dev->urb_buf, len, HZ);
+	mutex_unlock(&dev->ctrl_urb_lock);
+
 	if (dev->wait_after_write)
 		msleep(dev->wait_after_write);
 
-	kfree(bufs);
 	return ret;
 }
 
@@ -175,15 +187,21 @@ int em28xx_write_regs(struct em28xx *dev, u16 reg, char *buf, int len)
 	   Not sure what happens on reading GPO register.
 	 */
 	if (rc >= 0) {
-		if (reg == EM2880_R04_GPO)
+		if (reg == dev->reg_gpo_num)
 			dev->reg_gpo = buf[0];
-		else if (reg == EM28XX_R08_GPIO)
+		else if (reg == dev->reg_gpio_num)
 			dev->reg_gpio = buf[0];
 	}
 
 	return rc;
 }
 
+/* Write a single register */
+int em28xx_write_reg(struct em28xx *dev, u16 reg, u8 val)
+{
+	return em28xx_write_regs(dev, reg, &val, 1);
+}
+
 /*
  * em28xx_write_reg_bits()
  * sets only some bits (specified by bitmask) of a register, by first reading
@@ -196,9 +214,9 @@ static int em28xx_write_reg_bits(struct em28xx *dev, u16 reg, u8 val,
 	u8 newval;
 
 	/* Uses cache for gpo/gpio registers */
-	if (reg == EM2880_R04_GPO)
+	if (reg == dev->reg_gpo_num)
 		oldval = dev->reg_gpo;
-	else if (reg == EM28XX_R08_GPIO)
+	else if (reg == dev->reg_gpio_num)
 		oldval = dev->reg_gpio;
 	else
 		oldval = em28xx_read_reg(dev, reg);
@@ -212,15 +230,70 @@ static int em28xx_write_reg_bits(struct em28xx *dev, u16 reg, u8 val,
 }
 
 /*
+ * em28xx_is_ac97_ready()
+ * Checks if ac97 is ready
+ */
+static int em28xx_is_ac97_ready(struct em28xx *dev)
+{
+	int ret, i;
+
+	/* Wait up to 50 ms for AC97 command to complete */
+	for (i = 0; i < 10; i++, msleep(5)) {
+		ret = em28xx_read_reg(dev, EM28XX_R43_AC97BUSY);
+		if (ret < 0)
+			return ret;
+
+		if (!(ret & 0x01))
+			return 0;
+	}
+
+	em28xx_warn("AC97 command still being executed: not handled properly!\n");
+	return -EBUSY;
+}
+
+/*
+ * em28xx_read_ac97()
+ * write a 16 bit value to the specified AC97 address (LSB first!)
+ */
+static int em28xx_read_ac97(struct em28xx *dev, u8 reg)
+{
+	int ret;
+	u8 addr = (reg & 0x7f) | 0x80;
+	u16 val;
+
+	ret = em28xx_is_ac97_ready(dev);
+	if (ret < 0)
+		return ret;
+
+	ret = em28xx_write_regs(dev, EM28XX_R42_AC97ADDR, &addr, 1);
+	if (ret < 0)
+		return ret;
+
+	ret = dev->em28xx_read_reg_req_len(dev, 0, EM28XX_R40_AC97LSB,
+					   (u8 *)&val, sizeof(val));
+
+	if (ret < 0)
+		return ret;
+	return le16_to_cpu(val);
+}
+
+/*
  * em28xx_write_ac97()
  * write a 16 bit value to the specified AC97 address (LSB first!)
  */
-static int em28xx_write_ac97(struct em28xx *dev, u8 reg, u8 *val)
+static int em28xx_write_ac97(struct em28xx *dev, u8 reg, u16 val)
 {
-	int ret, i;
+	int ret;
 	u8 addr = reg & 0x7f;
+	__le16 value;
+
+	value = cpu_to_le16(val);
+
+	ret = em28xx_is_ac97_ready(dev);
+	if (ret < 0)
+		return ret;
 
-	ret = em28xx_write_regs(dev, EM28XX_R40_AC97LSB, val, 2);
+	ret = em28xx_write_regs(dev, EM28XX_R40_AC97LSB, (u8 *) &value, 2);
 	if (ret < 0)
 		return ret;
 
@@ -228,33 +301,59 @@ static int em28xx_write_ac97(struct em28xx *dev, u8 reg, u8 *val)
 	if (ret < 0)
 		return ret;
 
-	/* Wait up to 50 ms for AC97 command to complete */
-	for (i = 0; i < 10; i++) {
-		ret = em28xx_read_reg(dev, EM28XX_R43_AC97BUSY);
-		if (ret < 0)
-			return ret;
+	return 0;
+}
 
-		if (!(ret & 0x01))
-			return 0;
-		msleep(5);
+struct em28xx_input_table {
+	enum em28xx_amux amux;
+	u8		 reg;
+};
+
+static struct em28xx_input_table inputs[] = {
+	{ EM28XX_AMUX_VIDEO, 	AC97_VIDEO_VOL   },
+	{ EM28XX_AMUX_LINE_IN,	AC97_LINEIN_VOL  },
+	{ EM28XX_AMUX_PHONE,	AC97_PHONE_VOL   },
+	{ EM28XX_AMUX_MIC,	AC97_MIC_VOL     },
+	{ EM28XX_AMUX_CD,	AC97_CD_VOL      },
+	{ EM28XX_AMUX_AUX,	AC97_AUX_VOL     },
+	{ EM28XX_AMUX_PCM_OUT,	AC97_PCM_OUT_VOL },
+};
+
+static int set_ac97_input(struct em28xx *dev)
+{
+	int ret, i;
+	enum em28xx_amux amux = dev->ctl_ainput;
+
+	/* EM28XX_AMUX_VIDEO2 is a special case used to indicate that
+	   em28xx should point to LINE IN, while AC97 should use VIDEO
+	 */
+	if (amux == EM28XX_AMUX_VIDEO2)
+		amux = dev->ctl_ainput;
+
+	/* Mute all entres but the one that were selected */
+	for (i = 0; i < ARRAY_SIZE(inputs); i++) {
+		if (amux == inputs[i].amux)
+			ret = em28xx_write_ac97(dev, inputs[i].reg, 0x0808);
+		else
+			ret = em28xx_write_ac97(dev, inputs[i].reg, 0x8000);
+
+		if (ret < 0)
+			em28xx_warn("couldn't setup AC97 register %d\n",
+				     inputs[i].reg);
 	}
-	em28xx_warn("AC97 command still being executed: not handled properly!\n");
 	return 0;
 }
 
 static int em28xx_set_audio_source(struct em28xx *dev)
 {
-	static char *enable  = "\x08\x08";
-	static char *disable = "\x08\x88";
-	char *video = enable, *line = disable;
 	int ret;
 	u8 input;
 
 	if (dev->is_em2800) {
-		if (dev->ctl_ainput)
-			input = EM2800_AUDIO_SRC_LINE;
-		else
+		if (dev->ctl_ainput == EM28XX_AMUX_VIDEO)
 			input = EM2800_AUDIO_SRC_TUNER;
+		else
+			input = EM2800_AUDIO_SRC_LINE;
 
 		ret = em28xx_write_regs(dev, EM2800_R08_AUDIOSRC, &input, 1);
 		if (ret < 0)
@@ -268,16 +367,8 @@ static int em28xx_set_audio_source(struct em28xx *dev)
 		case EM28XX_AMUX_VIDEO:
 			input = EM28XX_AUDIO_SRC_TUNER;
 			break;
-		case EM28XX_AMUX_LINE_IN:
-			input = EM28XX_AUDIO_SRC_LINE;
-			break;
-		case EM28XX_AMUX_AC97_VIDEO:
-			input = EM28XX_AUDIO_SRC_LINE;
-			break;
-		case EM28XX_AMUX_AC97_LINE_IN:
+		default:
 			input = EM28XX_AUDIO_SRC_LINE;
-			video = disable;
-			line  = enable;
 			break;
 		}
 	}
@@ -287,14 +378,12 @@ static int em28xx_set_audio_source(struct em28xx *dev)
 		return ret;
 	msleep(5);
 
-	/* Sets AC97 mixer registers
-	   This is seems to be needed, even for non-ac97 configs
-	 */
-	ret = em28xx_write_ac97(dev, EM28XX_R14_VIDEO_AC97, video);
-	if (ret < 0)
-		return ret;
-
-	ret = em28xx_write_ac97(dev, EM28XX_R10_LINE_IN_AC97, line);
+	switch (dev->audio_mode.ac97) {
+	case EM28XX_NO_AC97:
+		break;
+	default:
+		ret = set_ac97_input(dev);
+	}
 
 	return ret;
 }
@@ -302,18 +391,21 @@ static int em28xx_set_audio_source(struct em28xx *dev)
 int em28xx_audio_analog_set(struct em28xx *dev)
 {
 	int ret;
-	char s[2] = { 0x00, 0x00 };
 	u8 xclk = 0x07;
 
-	s[0] |= 0x1f - dev->volume;
-	s[1] |= 0x1f - dev->volume;
+	if (!dev->audio_mode.has_audio)
+		return 0;
 
-	/* Mute */
-	s[1] |= 0x80;
-	ret = em28xx_write_ac97(dev, EM28XX_R02_MASTER_AC97, s);
+	/* It is assumed that all devices use master volume for output.
+	   It would be possible to use also line output.
+	 */
+	if (dev->audio_mode.ac97 != EM28XX_NO_AC97) {
+		/* Mute */
+		ret = em28xx_write_ac97(dev, AC97_MASTER_VOL, 0x8000);
 
-	if (ret < 0)
-		return ret;
+		if (ret < 0)
+			return ret;
+	}
 
 	if (dev->has_12mhz_i2s)
 		xclk |= 0x20;
@@ -329,15 +421,116 @@ int em28xx_audio_analog_set(struct em28xx *dev)
 	/* Selects the proper audio input */
 	ret = em28xx_set_audio_source(dev);
 
-	/* Unmute device */
-	if (!dev->mute)
-		s[1] &= ~0x80;
-	ret = em28xx_write_ac97(dev, EM28XX_R02_MASTER_AC97, s);
+	/* Sets volume */
+	if (dev->audio_mode.ac97 != EM28XX_NO_AC97) {
+		int vol;
+
+		/* LSB: left channel - both channels with the same level */
+		vol = (0x1f - dev->volume) | ((0x1f - dev->volume) << 8);
+
+		/* Mute device, if needed */
+		if (dev->mute)
+			vol |= 0x8000;
+
+		/* Sets volume */
+		ret = em28xx_write_ac97(dev, AC97_MASTER_VOL, vol);
+	}
 
 	return ret;
 }
 EXPORT_SYMBOL_GPL(em28xx_audio_analog_set);
 
+int em28xx_audio_setup(struct em28xx *dev)
+{
+	int vid1, vid2, feat, cfg;
+	u32 vid;
+
+	if (dev->chip_id == CHIP_ID_EM2874) {
+		/* Digital only device - don't load any alsa module */
+		dev->audio_mode.has_audio = 0;
+		dev->has_audio_class = 0;
+		dev->has_alsa_audio = 0;
+		return 0;
+	}
+
+	/* If device doesn't support Usb Audio Class, use vendor class */
+	if (!dev->has_audio_class)
+		dev->has_alsa_audio = 1;
+
+	dev->audio_mode.has_audio = 1;
+
+	/* See how this device is configured */
+	cfg = em28xx_read_reg(dev, EM28XX_R00_CHIPCFG);
+	if (cfg < 0)
+		cfg = EM28XX_CHIPCFG_AC97; /* Be conservative */
+	else
+		em28xx_info("Config register raw data: 0x%02x\n", cfg);
+
+	if ((cfg & EM28XX_CHIPCFG_AUDIOMASK) ==
+		    EM28XX_CHIPCFG_I2S_3_SAMPRATES) {
+		em28xx_info("I2S Audio (3 sample rates)\n");
+		dev->audio_mode.i2s_3rates = 1;
+	}
+	if ((cfg & EM28XX_CHIPCFG_AUDIOMASK) ==
+		    EM28XX_CHIPCFG_I2S_5_SAMPRATES) {
+		em28xx_info("I2S Audio (5 sample rates)\n");
+		dev->audio_mode.i2s_5rates = 1;
+	}
+
+	if (!(cfg & EM28XX_CHIPCFG_AC97)) {
+		dev->audio_mode.ac97 = EM28XX_NO_AC97;
+		goto init_audio;
+	}
+
+	dev->audio_mode.ac97 = EM28XX_AC97_OTHER;
+
+	vid1 = em28xx_read_ac97(dev, AC97_VENDOR_ID1);
+	if (vid1 < 0) {
+		/* Device likely doesn't support AC97 */
+		em28xx_warn("AC97 chip type couldn't be determined\n");
+		goto init_audio;
+	}
+
+	vid2 = em28xx_read_ac97(dev, AC97_VENDOR_ID2);
+	if (vid2 < 0)
+		goto init_audio;
+
+	vid = vid1 << 16 | vid2;
+
+	dev->audio_mode.ac97_vendor_id = vid;
+	em28xx_warn("AC97 vendor ID = 0x%08x\n", vid);
+
+	feat = em28xx_read_ac97(dev, AC97_RESET);
+	if (feat < 0)
+		goto init_audio;
+
+	dev->audio_mode.ac97_feat = feat;
+	em28xx_warn("AC97 features = 0x%04x\n", feat);
+
+	/* Try to identify what audio processor we have */
+	if ((vid == 0xffffffff) && (feat == 0x6a90))
+		dev->audio_mode.ac97 = EM28XX_AC97_EM202;
+
+init_audio:
+	/* Reports detected AC97 processor */
+	switch (dev->audio_mode.ac97) {
+	case EM28XX_NO_AC97:
+		em28xx_info("No AC97 audio processor\n");
+		break;
+	case EM28XX_AC97_EM202:
+		em28xx_info("Empia 202 AC97 audio processor detected\n");
+		break;
+	case EM28XX_AC97_OTHER:
+		em28xx_warn("Unknown AC97 audio processor detected!\n");
+		break;
+	default:
+		break;
+	}
+
+	return em28xx_audio_analog_set(dev);
+}
+EXPORT_SYMBOL_GPL(em28xx_audio_setup);
+
 int em28xx_colorlevels_set_default(struct em28xx *dev)
 {
 	em28xx_write_regs(dev, EM28XX_R20_YGAIN, "\x10", 1);	/* contrast */
@@ -359,6 +552,24 @@ int em28xx_colorlevels_set_default(struct em28xx *dev)
 int em28xx_capture_start(struct em28xx *dev, int start)
 {
 	int rc;
+
+	if (dev->chip_id == CHIP_ID_EM2874) {
+		/* The Transport Stream Enable Register moved in em2874 */
+		if (!start) {
+			rc = em28xx_write_reg_bits(dev, EM2874_R5F_TS_ENABLE,
+						   0x00,
+						   EM2874_TS1_CAPTURE_ENABLE);
+			return rc;
+		}
+
+		/* Enable Transport Stream */
+		rc = em28xx_write_reg_bits(dev, EM2874_R5F_TS_ENABLE,
+					   EM2874_TS1_CAPTURE_ENABLE,
+					   EM2874_TS1_CAPTURE_ENABLE);
+		return rc;
+	}
+
+
 	/* FIXME: which is the best order? */
 	/* video registers are sampled by VREF */
 	rc = em28xx_write_reg_bits(dev, EM28XX_R0C_USBSUSP,
diff --git a/linux/drivers/media/video/em28xx/em28xx-i2c.c b/linux/drivers/media/video/em28xx/em28xx-i2c.c
index 3bab56b99..ec3e3b157 100644
--- a/linux/drivers/media/video/em28xx/em28xx-i2c.c
+++ b/linux/drivers/media/video/em28xx/em28xx-i2c.c
@@ -332,14 +332,25 @@ static int em28xx_i2c_eeprom(struct em28xx *dev, unsigned char *eedata, int len)
 	struct em28xx_eeprom *em_eeprom = (void *)eedata;
 	int i, err, size = len, block;
 
+	if (dev->chip_id == CHIP_ID_EM2874) {
+		/* Empia switched to a 16-bit addressable eeprom in newer
+		   devices.  While we could certainly write a routine to read
+		   the eeprom, there is nothing of use in there that cannot be
+		   accessed through registers, and there is the risk that we
+		   could corrupt the eeprom (since a 16-bit read call is
+		   interpreted as a write call by 8-bit eeproms).
+		*/
+		return 0;
+	}
+
 	dev->i2c_client.addr = 0xa0 >> 1;
 
 	/* Check if board has eeprom */
 	err = i2c_master_recv(&dev->i2c_client, &buf, 0);
 	if (err < 0) {
-		em28xx_errdev("%s: i2c_master_recv failed! err [%d]\n",
-			__func__, err);
-		return err;
+		em28xx_errdev("board has no eeprom\n");
+		memset(eedata, 0, len);
+		return -ENODEV;
 	}
 
 	buf = 0;
@@ -609,14 +620,16 @@ int em28xx_i2c_register(struct em28xx *dev)
 	dev->i2c_client.adapter = &dev->i2c_adap;
 
 	retval = em28xx_i2c_eeprom(dev, dev->eedata, sizeof(dev->eedata));
-	if (retval < 0) {
+	if ((retval < 0) && (retval != -ENODEV)) {
 		em28xx_errdev("%s: em28xx_i2_eeprom failed! retval [%d]\n",
 			__func__, retval);
+
 		return retval;
 	}
 
 	if (i2c_scan)
 		em28xx_do_i2c_scan(dev);
+
 	return 0;
 }
 
diff --git a/linux/drivers/media/video/em28xx/em28xx-input.c b/linux/drivers/media/video/em28xx/em28xx-input.c
index 8d21eaad9..29900920d 100644
--- a/linux/drivers/media/video/em28xx/em28xx-input.c
+++ b/linux/drivers/media/video/em28xx/em28xx-input.c
@@ -39,12 +39,48 @@ static unsigned int ir_debug;
 module_param(ir_debug, int, 0644);
 MODULE_PARM_DESC(ir_debug, "enable debug messages [IR]");
 
-#define dprintk(fmt, arg...) \
+#define i2cdprintk(fmt, arg...) \
 	if (ir_debug) { \
 		printk(KERN_DEBUG "%s/ir: " fmt, ir->c.name , ## arg); \
 	}
 
-/* ----------------------------------------------------------------------- */
+#define dprintk(fmt, arg...) \
+	if (ir_debug) { \
+		printk(KERN_DEBUG "%s/ir: " fmt, ir->name , ## arg); \
+	}
+
+/**********************************************************
+ Polling structure used by em28xx IR's
+ **********************************************************/
+
+struct em28xx_ir_poll_result {
+	unsigned int toggle_bit:1;
+	unsigned int read_count:7;
+	u8 rc_address;
+	u8 rc_data[4]; /* 1 byte on em2860/2880, 4 on em2874 */
+};
+
+struct em28xx_IR {
+	struct em28xx *dev;
+	struct input_dev *input;
+	struct ir_input_state ir;
+	char name[32];
+	char phys[32];
+
+	/* poll external decoder */
+	int polling;
+	struct work_struct work;
+	struct timer_list timer;
+	unsigned int last_toggle:1;
+	unsigned int last_readcount;
+	unsigned int repeat_interval;
+
+	int  (*get_key)(struct em28xx_IR *, struct em28xx_ir_poll_result *);
+};
+
+/**********************************************************
+ I2C IR based get keycodes - should be used with ir-kbd-i2c
+ **********************************************************/
 
 int em28xx_get_key_terratec(struct IR_i2c *ir, u32 *ir_key, u32 *ir_raw)
 {
@@ -52,7 +88,7 @@ int em28xx_get_key_terratec(struct IR_i2c *ir, u32 *ir_key, u32 *ir_raw)
 
 	/* poll IR chip */
 	if (1 != i2c_master_recv(&ir->c, &b, 1)) {
-		dprintk("read error\n");
+		i2cdprintk("read error\n");
 		return -EIO;
 	}
 
@@ -60,7 +96,7 @@ int em28xx_get_key_terratec(struct IR_i2c *ir, u32 *ir_key, u32 *ir_raw)
 	   down, while 0xff indicates that no button is hold
 	   down. 0xfe sequences are sometimes interrupted by 0xFF */
 
-	dprintk("key %02x\n", b);
+	i2cdprintk("key %02x\n", b);
 
 	if (b == 0xff)
 		return 0;
@@ -74,7 +110,6 @@ int em28xx_get_key_terratec(struct IR_i2c *ir, u32 *ir_key, u32 *ir_raw)
 	return 1;
 }
 
-
 int em28xx_get_key_em_haup(struct IR_i2c *ir, u32 *ir_key, u32 *ir_raw)
 {
 	unsigned char buf[2];
@@ -103,7 +138,7 @@ int em28xx_get_key_em_haup(struct IR_i2c *ir, u32 *ir_key, u32 *ir_raw)
 		 ((buf[0]&0x10)>>3) | /* 0000 0010 */
 		 ((buf[0]&0x20)>>5);  /* 0000 0001 */
 
-	dprintk("ir hauppauge (em2840): code=0x%02x (rcv=0x%02x)\n",
+	i2cdprintk("ir hauppauge (em2840): code=0x%02x (rcv=0x%02x)\n",
 			code, buf[0]);
 
 	/* return key */
@@ -120,11 +155,11 @@ int em28xx_get_key_pinnacle_usb_grey(struct IR_i2c *ir, u32 *ir_key,
 	/* poll IR chip */
 
 	if (3 != i2c_master_recv(&ir->c, buf, 3)) {
-		dprintk("read error\n");
+		i2cdprintk("read error\n");
 		return -EIO;
 	}
 
-	dprintk("key %02x\n", buf[2]&0x3f);
+	i2cdprintk("key %02x\n", buf[2]&0x3f);
 	if (buf[0] != 0x00)
 		return 0;
 
@@ -134,6 +169,276 @@ int em28xx_get_key_pinnacle_usb_grey(struct IR_i2c *ir, u32 *ir_key,
 	return 1;
 }
 
+/**********************************************************
+ Poll based get keycode functions
+ **********************************************************/
+
+/* This is for the em2860/em2880 */
+static int default_polling_getkey(struct em28xx_IR *ir,
+				  struct em28xx_ir_poll_result *poll_result)
+{
+	struct em28xx *dev = ir->dev;
+	int rc;
+	u8 msg[3] = { 0, 0, 0 };
+
+	/* Read key toggle, brand, and key code
+	   on registers 0x45, 0x46 and 0x47
+	 */
+	rc = dev->em28xx_read_reg_req_len(dev, 0, EM28XX_R45_IR,
+					  msg, sizeof(msg));
+	if (rc < 0)
+		return rc;
+
+	/* Infrared toggle (Reg 0x45[7]) */
+	poll_result->toggle_bit = (msg[0] >> 7);
+
+	/* Infrared read count (Reg 0x45[6:0] */
+	poll_result->read_count = (msg[0] & 0x7f);
+
+	/* Remote Control Address (Reg 0x46) */
+	poll_result->rc_address = msg[1];
+
+	/* Remote Control Data (Reg 0x47) */
+	poll_result->rc_data[0] = msg[2];
+
+	return 0;
+}
+
+static int em2874_polling_getkey(struct em28xx_IR *ir,
+				 struct em28xx_ir_poll_result *poll_result)
+{
+	struct em28xx *dev = ir->dev;
+	int rc;
+	u8 msg[5] = { 0, 0, 0, 0, 0 };
+
+	/* Read key toggle, brand, and key code
+	   on registers 0x51-55
+	 */
+	rc = dev->em28xx_read_reg_req_len(dev, 0, EM2874_R51_IR,
+					  msg, sizeof(msg));
+	if (rc < 0)
+		return rc;
+
+	/* Infrared toggle (Reg 0x51[7]) */
+	poll_result->toggle_bit = (msg[0] >> 7);
+
+	/* Infrared read count (Reg 0x51[6:0] */
+	poll_result->read_count = (msg[0] & 0x7f);
+
+	/* Remote Control Address (Reg 0x52) */
+	poll_result->rc_address = msg[1];
+
+	/* Remote Control Data (Reg 0x53-55) */
+	poll_result->rc_data[0] = msg[2];
+	poll_result->rc_data[1] = msg[3];
+	poll_result->rc_data[2] = msg[4];
+
+	return 0;
+}
+
+/**********************************************************
+ Polling code for em28xx
+ **********************************************************/
+
+static void em28xx_ir_handle_key(struct em28xx_IR *ir)
+{
+	int result;
+	int do_sendkey = 0;
+	struct em28xx_ir_poll_result poll_result;
+
+	/* read the registers containing the IR status */
+	result = ir->get_key(ir, &poll_result);
+	if (result < 0) {
+		dprintk("ir->get_key() failed %d\n", result);
+		return;
+	}
+
+	dprintk("ir->get_key result tb=%02x rc=%02x lr=%02x data=%02x\n",
+		poll_result.toggle_bit, poll_result.read_count,
+		ir->last_readcount, poll_result.rc_data[0]);
+
+	if (ir->dev->chip_id == CHIP_ID_EM2874) {
+		/* The em2874 clears the readcount field every time the
+		   register is read.  The em2860/2880 datasheet says that it
+		   is supposed to clear the readcount, but it doesn't.  So with
+		   the em2874, we are looking for a non-zero read count as
+		   opposed to a readcount that is incrementing */
+		ir->last_readcount = 0;
+	}
+
+	if (poll_result.read_count == 0) {
+		/* The button has not been pressed since the last read */
+	} else if (ir->last_toggle != poll_result.toggle_bit) {
+		/* A button has been pressed */
+		dprintk("button has been pressed\n");
+		ir->last_toggle = poll_result.toggle_bit;
+		ir->repeat_interval = 0;
+		do_sendkey = 1;
+	} else if (poll_result.toggle_bit == ir->last_toggle &&
+		   poll_result.read_count > 0 &&
+		   poll_result.read_count != ir->last_readcount) {
+		/* The button is still being held down */
+		dprintk("button being held down\n");
+
+		/* Debouncer for first keypress */
+		if (ir->repeat_interval++ > 9) {
+			/* Start repeating after 1 second */
+			do_sendkey = 1;
+		}
+	}
+
+	if (do_sendkey) {
+		dprintk("sending keypress\n");
+		ir_input_keydown(ir->input, &ir->ir, poll_result.rc_data[0],
+				 poll_result.rc_data[0]);
+		ir_input_nokey(ir->input, &ir->ir);
+	}
+
+	ir->last_readcount = poll_result.read_count;
+	return;
+}
+
+static void ir_timer(unsigned long data)
+{
+	struct em28xx_IR *ir = (struct em28xx_IR *)data;
+
+	schedule_work(&ir->work);
+}
+
+#if LINUX_VERSION_CODE < KERNEL_VERSION(2, 6, 20)
+static void em28xx_ir_work(void *data)
+#else
+static void em28xx_ir_work(struct work_struct *work)
+#endif
+{
+#if LINUX_VERSION_CODE < KERNEL_VERSION(2, 6, 20)
+	struct em28xx_IR *ir = data;
+#else
+	struct em28xx_IR *ir = container_of(work, struct em28xx_IR, work);
+#endif
+
+	em28xx_ir_handle_key(ir);
+	mod_timer(&ir->timer, jiffies + msecs_to_jiffies(ir->polling));
+}
+
+void em28xx_ir_start(struct em28xx_IR *ir)
+{
+	setup_timer(&ir->timer, ir_timer, (unsigned long)ir);
+#if LINUX_VERSION_CODE < KERNEL_VERSION(2, 6, 20)
+	INIT_WORK(&ir->work, em28xx_ir_work, ir);
+#else
+	INIT_WORK(&ir->work, em28xx_ir_work);
+#endif
+	schedule_work(&ir->work);
+}
+
+static void em28xx_ir_stop(struct em28xx_IR *ir)
+{
+	del_timer_sync(&ir->timer);
+	flush_scheduled_work();
+}
+
+int em28xx_ir_init(struct em28xx *dev)
+{
+	struct em28xx_IR *ir;
+	struct input_dev *input_dev;
+	u8 ir_config;
+	int err = -ENOMEM;
+
+	if (dev->ir_codes == NULL) {
+		/* No remote control support */
+		return 0;
+	}
+
+	ir = kzalloc(sizeof(*ir), GFP_KERNEL);
+	input_dev = input_allocate_device();
+	if (!ir || !input_dev)
+		goto err_out_free;
+
+	ir->input = input_dev;
+
+	/* Setup the proper handler based on the chip */
+	switch (dev->chip_id) {
+	case CHIP_ID_EM2860:
+	case CHIP_ID_EM2883:
+		ir->get_key = default_polling_getkey;
+		break;
+	case CHIP_ID_EM2874:
+		ir->get_key = em2874_polling_getkey;
+		/* For now we only support RC5, so enable it */
+		ir_config = EM2874_IR_RC5;
+		em28xx_write_regs(dev, EM2874_R50_IR_CONFIG, &ir_config, 1);
+		break;
+	default:
+		printk("Unrecognized em28xx chip id: IR not supported\n");
+		goto err_out_free;
+	}
+
+	/* This is how often we ask the chip for IR information */
+	ir->polling = 100; /* ms */
+
+	/* init input device */
+	snprintf(ir->name, sizeof(ir->name), "em28xx IR (%s)",
+						dev->name);
+
+	usb_make_path(dev->udev, ir->phys, sizeof(ir->phys));
+	strlcat(ir->phys, "/input0", sizeof(ir->phys));
+
+	ir_input_init(input_dev, &ir->ir, IR_TYPE_OTHER, dev->ir_codes);
+	input_dev->name = ir->name;
+	input_dev->phys = ir->phys;
+	input_dev->id.bustype = BUS_USB;
+	input_dev->id.version = 1;
+	input_dev->id.vendor = le16_to_cpu(dev->udev->descriptor.idVendor);
+	input_dev->id.product = le16_to_cpu(dev->udev->descriptor.idProduct);
+
+#if LINUX_VERSION_CODE >= KERNEL_VERSION(2, 6, 22)
+	input_dev->dev.parent = &dev->udev->dev;
+#else
+	input_dev->cdev.dev = &dev->udev->dev;
+#endif
+	/* record handles to ourself */
+	ir->dev = dev;
+	dev->ir = ir;
+
+	em28xx_ir_start(ir);
+
+	/* all done */
+	err = input_register_device(ir->input);
+	if (err)
+		goto err_out_stop;
+
+	return 0;
+ err_out_stop:
+	em28xx_ir_stop(ir);
+	dev->ir = NULL;
+ err_out_free:
+	input_free_device(input_dev);
+	kfree(ir);
+	return err;
+}
+
+int em28xx_ir_fini(struct em28xx *dev)
+{
+	struct em28xx_IR *ir = dev->ir;
+
+	/* skip detach on non attached boards */
+	if (!ir)
+		return 0;
+
+	em28xx_ir_stop(ir);
+	input_unregister_device(ir->input);
+	kfree(ir);
+
+	/* done */
+	dev->ir = NULL;
+	return 0;
+}
+
+/**********************************************************
+ Handle Webcam snapshot button
+ **********************************************************/
+
 #if LINUX_VERSION_CODE < KERNEL_VERSION(2, 6, 20)
 static void em28xx_query_sbutton(void *data)
 #else
@@ -232,9 +537,3 @@ void em28xx_deregister_snapshot_button(struct em28xx *dev)
 	}
 	return;
 }
-
-/* ----------------------------------------------------------------------
- * Local variables:
- * c-basic-offset: 8
- * End:
- */
diff --git a/linux/drivers/media/video/em28xx/em28xx-reg.h b/linux/drivers/media/video/em28xx/em28xx-reg.h
index fac1ab23f..98e95054e 100644
--- a/linux/drivers/media/video/em28xx/em28xx-reg.h
+++ b/linux/drivers/media/video/em28xx/em28xx-reg.h
@@ -17,11 +17,34 @@
 
 /* em28xx registers */
 
+#define EM28XX_R00_CHIPCFG	0x00
+
+/* em28xx Chip Configuration 0x00 */
+#define EM28XX_CHIPCFG_VENDOR_AUDIO		0x80
+#define EM28XX_CHIPCFG_I2S_VOLUME_CAPABLE	0x40
+#define EM28XX_CHIPCFG_I2S_3_SAMPRATES		0x30
+#define EM28XX_CHIPCFG_I2S_5_SAMPRATES		0x20
+#define EM28XX_CHIPCFG_AC97			0x10
+#define EM28XX_CHIPCFG_AUDIOMASK		0x30
+
 	/* GPIO/GPO registers */
 #define EM2880_R04_GPO	0x04    /* em2880-em2883 only */
 #define EM28XX_R08_GPIO	0x08	/* em2820 or upper */
 
 #define EM28XX_R06_I2C_CLK	0x06
+
+/* em28xx I2C Clock Register (0x06) */
+#define EM28XX_I2C_CLK_ACK_LAST_READ	0x80
+#define EM28XX_I2C_CLK_WAIT_ENABLE	0x40
+#define EM28XX_I2C_EEPROM_ON_BOARD	0x08
+#define EM28XX_I2C_EEPROM_KEY_VALID	0x04
+#define EM2874_I2C_SECONDARY_BUS_SELECT	0x04 /* em2874 has two i2c busses */
+#define EM28XX_I2C_FREQ_1_5_MHZ		0x03 /* bus frequency (bits [1-0]) */
+#define EM28XX_I2C_FREQ_25_KHZ		0x02
+#define EM28XX_I2C_FREQ_400_KHZ		0x01
+#define EM28XX_I2C_FREQ_100_KHZ		0x00
+
+
 #define EM28XX_R0A_CHIPID	0x0a
 #define EM28XX_R0C_USBSUSP	0x0c	/* */
 
@@ -71,10 +94,32 @@
 #define EM28XX_R42_AC97ADDR	0x42
 #define EM28XX_R43_AC97BUSY	0x43
 
-/* em202 registers */
-#define EM28XX_R02_MASTER_AC97	0x02
-#define EM28XX_R10_LINE_IN_AC97    0x10
-#define EM28XX_R14_VIDEO_AC97	0x14
+#define EM28XX_R45_IR		0x45
+	/* 0x45  bit 7    - parity bit
+		 bits 6-0 - count
+	   0x46  IR brand
+	   0x47  IR data
+	 */
+
+/* em2874 registers */
+#define EM2874_R50_IR_CONFIG    0x50
+#define EM2874_R51_IR           0x51
+#define EM2874_R5F_TS_ENABLE    0x5f
+#define EM2874_R80_GPIO         0x80
+
+/* em2874 IR config register (0x50) */
+#define EM2874_IR_NEC           0x00
+#define EM2874_IR_RC5           0x04
+#define EM2874_IR_RC5_MODE_0    0x08
+#define EM2874_IR_RC5_MODE_6A   0x0b
+
+/* em2874 Transport Stream Enable Register (0x5f) */
+#define EM2874_TS1_CAPTURE_ENABLE (1 << 0)
+#define EM2874_TS1_FILTER_ENABLE  (1 << 1)
+#define EM2874_TS1_NULL_DISCARD   (1 << 2)
+#define EM2874_TS2_CAPTURE_ENABLE (1 << 4)
+#define EM2874_TS2_FILTER_ENABLE  (1 << 5)
+#define EM2874_TS2_NULL_DISCARD   (1 << 6)
 
 /* register settings */
 #define EM2800_AUDIO_SRC_TUNER  0x0d
@@ -84,6 +129,74 @@
 
 /* FIXME: Need to be populated with the other chip ID's */
 enum em28xx_chip_id {
+	CHIP_ID_EM2820 = 18,
+	CHIP_ID_EM2840 = 20,
+	CHIP_ID_EM2750 = 33,
 	CHIP_ID_EM2860 = 34,
 	CHIP_ID_EM2883 = 36,
+	CHIP_ID_EM2874 = 65,
 };
+
+/*
+ * Registers used by em202 and other AC97 chips
+ */
+
+/* Standard AC97 registers */
+#define AC97_RESET               0x00
+
+	/* Output volumes */
+#define AC97_MASTER_VOL          0x02
+#define AC97_LINE_LEVEL_VOL      0x04	/* Some devices use for headphones */
+#define AC97_MASTER_MONO_VOL     0x06
+
+	/* Input volumes */
+#define AC97_PC_BEEP_VOL         0x0a
+#define AC97_PHONE_VOL           0x0c
+#define AC97_MIC_VOL             0x0e
+#define AC97_LINEIN_VOL          0x10
+#define AC97_CD_VOL              0x12
+#define AC97_VIDEO_VOL           0x14
+#define AC97_AUX_VOL             0x16
+#define AC97_PCM_OUT_VOL         0x18
+
+	/* capture registers */
+#define AC97_RECORD_SELECT       0x1a
+#define AC97_RECORD_GAIN         0x1c
+
+	/* control registers */
+#define AC97_GENERAL_PURPOSE     0x20
+#define AC97_3D_CTRL             0x22
+#define AC97_AUD_INT_AND_PAG     0x24
+#define AC97_POWER_DOWN_CTRL     0x26
+#define AC97_EXT_AUD_ID          0x28
+#define AC97_EXT_AUD_CTRL        0x2a
+
+/* Supported rate varies for each AC97 device
+   if write an unsupported value, it will return the closest one
+ */
+#define AC97_PCM_OUT_FRONT_SRATE 0x2c
+#define AC97_PCM_OUT_SURR_SRATE  0x2e
+#define AC97_PCM_OUT_LFE_SRATE   0x30
+#define AC97_PCM_IN_SRATE        0x32
+
+	/* For devices with more than 2 channels, extra output volumes */
+#define AC97_LFE_MASTER_VOL      0x36
+#define AC97_SURR_MASTER_VOL     0x38
+
+	/* Digital SPDIF output control */
+#define AC97_SPDIF_OUT_CTRL      0x3a
+
+	/* Vendor ID identifier */
+#define AC97_VENDOR_ID1          0x7c
+#define AC97_VENDOR_ID2          0x7e
+
+/* EMP202 vendor registers */
+#define EM202_EXT_MODEM_CTRL     0x3e
+#define EM202_GPIO_CONF          0x4c
+#define EM202_GPIO_POLARITY      0x4e
+#define EM202_GPIO_STICKY        0x50
+#define EM202_GPIO_MASK          0x52
+#define EM202_GPIO_STATUS        0x54
+#define EM202_SPDIF_OUT_SEL      0x6a
+#define EM202_ANTIPOP            0x72
+#define EM202_EAPD_GPIO_ACCESS   0x74
diff --git a/linux/drivers/media/video/em28xx/em28xx-video.c b/linux/drivers/media/video/em28xx/em28xx-video.c
index a4493da8a..88bff6bd7 100644
--- a/linux/drivers/media/video/em28xx/em28xx-video.c
+++ b/linux/drivers/media/video/em28xx/em28xx-video.c
@@ -1656,11 +1656,13 @@ static void em28xx_release_resources(struct em28xx *dev)
 
 	/*FIXME: I2C IR should be disconnected */
 
-	em28xx_info("V4L2 devices /dev/video%d and /dev/vbi%d deregistered\n",
-				dev->vdev->num, dev->vbi_dev->num);
 	list_del(&dev->devlist);
 	if (dev->sbutton_input_dev)
 		em28xx_deregister_snapshot_button(dev);
+
+	if (dev->ir)
+		em28xx_ir_fini(dev);
+
 	if (dev->radio_dev) {
 		if (-1 != dev->radio_dev->minor)
 			video_unregister_device(dev->radio_dev);
@@ -1669,6 +1671,8 @@ static void em28xx_release_resources(struct em28xx *dev)
 		dev->radio_dev = NULL;
 	}
 	if (dev->vbi_dev) {
+		em28xx_info("V4L2 device /dev/vbi%d deregistered\n",
+			    dev->vbi_dev->num);
 		if (-1 != dev->vbi_dev->minor)
 			video_unregister_device(dev->vbi_dev);
 		else
@@ -1676,6 +1680,8 @@ static void em28xx_release_resources(struct em28xx *dev)
 		dev->vbi_dev = NULL;
 	}
 	if (dev->vdev) {
+		em28xx_info("V4L2 device /dev/video%d deregistered\n",
+			    dev->vdev->num);
 		if (-1 != dev->vdev->minor)
 			video_unregister_device(dev->vdev);
 		else
@@ -1982,7 +1988,6 @@ static struct video_device *em28xx_vdev_init(struct em28xx *dev,
 	return vfd;
 }
 
-
 /*
  * em28xx_init_dev()
  * allocates and inits the device structs, registers i2c bus and v4l device
@@ -1998,6 +2003,7 @@ static int em28xx_init_dev(struct em28xx **devhandle, struct usb_device *udev,
 
 	dev->udev = udev;
 	mutex_init(&dev->lock);
+	mutex_init(&dev->ctrl_urb_lock);
 	spin_lock_init(&dev->slock);
 	init_waitqueue_head(&dev->open);
 	init_waitqueue_head(&dev->wait_frame);
@@ -2015,8 +2021,6 @@ static int em28xx_init_dev(struct em28xx **devhandle, struct usb_device *udev,
 	errCode = em28xx_config(dev);
 	if (errCode) {
 		em28xx_errdev("error configuring device\n");
-		em28xx_devused &= ~(1<<dev->devno);
-		kfree(dev);
 		return -ENOMEM;
 	}
 
@@ -2032,11 +2036,10 @@ static int em28xx_init_dev(struct em28xx **devhandle, struct usb_device *udev,
 	em28xx_card_setup(dev);
 
 	/* Configure audio */
-	errCode = em28xx_audio_analog_set(dev);
+	errCode = em28xx_audio_setup(dev);
 	if (errCode < 0) {
-		em28xx_errdev("%s: em28xx_audio_analog_set - errCode [%d]!\n",
+		em28xx_errdev("%s: Error while setting audio - errCode [%d]!\n",
 			__func__, errCode);
-		return errCode;
 	}
 
 	/* configure the device */
@@ -2153,7 +2156,6 @@ static int em28xx_init_dev(struct em28xx **devhandle, struct usb_device *udev,
 fail_unreg:
 	em28xx_release_resources(dev);
 	mutex_unlock(&dev->lock);
-	kfree(dev);
 	return retval;
 }
 
@@ -2171,7 +2173,7 @@ static void request_module_async(struct work_struct *work)
 
 	if (dev->has_audio_class)
 		request_module("snd-usb-audio");
-	else
+	else if (dev->has_alsa_audio)
 		request_module("em28xx-alsa");
 
 	if (dev->has_dvb)
@@ -2204,7 +2206,7 @@ static int em28xx_usb_probe(struct usb_interface *interface,
 	struct usb_interface *uif;
 	struct em28xx *dev = NULL;
 	int retval = -ENODEV;
-	int i, nr, ifnum;
+	int i, nr, ifnum, isoc_pipe;
 
 	udev = usb_get_dev(interface_to_usbdev(interface));
 	ifnum = interface->altsetting[0].desc.bInterfaceNumber;
@@ -2231,19 +2233,29 @@ static int em28xx_usb_probe(struct usb_interface *interface,
 			ifnum,
 			interface->altsetting[0].desc.bInterfaceClass);
 
-	endpoint = &interface->cur_altsetting->endpoint[1].desc;
+	endpoint = &interface->cur_altsetting->endpoint[0].desc;
 
 	/* check if the device has the iso in endpoint at the correct place */
-	if ((endpoint->bmAttributes & USB_ENDPOINT_XFERTYPE_MASK) !=
-	    USB_ENDPOINT_XFER_ISOC) {
-		em28xx_err(DRIVER_NAME " probing error: endpoint is non-ISO endpoint!\n");
-		em28xx_devused &= ~(1<<nr);
-		return -ENODEV;
-	}
-	if ((endpoint->bEndpointAddress & USB_ENDPOINT_DIR_MASK) == USB_DIR_OUT) {
-		em28xx_err(DRIVER_NAME " probing error: endpoint is ISO OUT endpoint!\n");
-		em28xx_devused &= ~(1<<nr);
-		return -ENODEV;
+	if ((endpoint->bmAttributes & USB_ENDPOINT_XFERTYPE_MASK) ==
+	    USB_ENDPOINT_XFER_ISOC &&
+	    (interface->altsetting[1].endpoint[0].desc.wMaxPacketSize == 940))
+	{
+		/* It's a newer em2874/em2875 device */
+		isoc_pipe = 0;
+	} else {
+		isoc_pipe = 1;
+		endpoint = &interface->cur_altsetting->endpoint[1].desc;
+		if ((endpoint->bmAttributes & USB_ENDPOINT_XFERTYPE_MASK) !=
+		    USB_ENDPOINT_XFER_ISOC) {
+			em28xx_err(DRIVER_NAME " probing error: endpoint is non-ISO endpoint!\n");
+			em28xx_devused &= ~(1<<nr);
+			return -ENODEV;
+		}
+		if ((endpoint->bEndpointAddress & USB_ENDPOINT_DIR_MASK) == USB_DIR_OUT) {
+			em28xx_err(DRIVER_NAME " probing error: endpoint is ISO OUT endpoint!\n");
+			em28xx_devused &= ~(1<<nr);
+			return -ENODEV;
+		}
 	}
 
 	if (nr >= EM28XX_MAXBOARDS) {
@@ -2275,9 +2287,6 @@ static int em28xx_usb_probe(struct usb_interface *interface,
 		}
 	}
 
-	printk(KERN_INFO DRIVER_NAME " %s usb audio class\n",
-		   dev->has_audio_class ? "Has" : "Doesn't have");
-
 	/* compute alternate max packet sizes */
 	uif = udev->actconfig->interface[0];
 
@@ -2294,7 +2303,7 @@ static int em28xx_usb_probe(struct usb_interface *interface,
 	}
 
 	for (i = 0; i < dev->num_alt ; i++) {
-		u16 tmp = le16_to_cpu(uif->altsetting[i].endpoint[1].desc.
+		u16 tmp = le16_to_cpu(uif->altsetting[i].endpoint[isoc_pipe].desc.
 							wMaxPacketSize);
 		dev->alt_max_pkt_size[i] =
 		    (tmp & 0x07ff) * (((tmp & 0x1800) >> 11) + 1);
@@ -2307,8 +2316,12 @@ static int em28xx_usb_probe(struct usb_interface *interface,
 
 	/* allocate device struct */
 	retval = em28xx_init_dev(&dev, udev, nr);
-	if (retval)
+	if (retval) {
+		em28xx_devused &= ~(1<<dev->devno);
+		kfree(dev);
+
 		return retval;
+	}
 
 	em28xx_info("Found %s\n", em28xx_boards[dev->model].name);
 
diff --git a/linux/drivers/media/video/em28xx/em28xx.h b/linux/drivers/media/video/em28xx/em28xx.h
index d73b8c983..9f96128df 100644
--- a/linux/drivers/media/video/em28xx/em28xx.h
+++ b/linux/drivers/media/video/em28xx/em28xx.h
@@ -98,11 +98,15 @@
 #define EM2882_BOARD_PINNACLE_HYBRID_PRO	  56
 #define EM2883_BOARD_KWORLD_HYBRID_A316		  57
 #define EM2820_BOARD_COMPRO_VIDEOMATE_FORYOU	  58
+#define EM2874_BOARD_PINNACLE_PCTV_80E		  59
 
 /* Limits minimum and default number of buffers */
 #define EM28XX_MIN_BUF 4
 #define EM28XX_DEF_BUF 8
 
+/*Limits the max URB message size */
+#define URB_MAX_CTRL_SIZE 80
+
 /* Params for validated field */
 #define EM28XX_BOARD_NOT_VALIDATED 1
 #define EM28XX_BOARD_VALIDATED	   0
@@ -253,11 +257,43 @@ enum enum28xx_itype {
 	EM28XX_RADIO,
 };
 
+enum em28xx_ac97_mode {
+	EM28XX_NO_AC97 = 0,
+	EM28XX_AC97_EM202,
+	EM28XX_AC97_OTHER,
+};
+
+struct em28xx_audio_mode {
+	enum em28xx_ac97_mode ac97;
+
+	u16 ac97_feat;
+	u32 ac97_vendor_id;
+
+	unsigned int has_audio:1;
+
+	unsigned int i2s_3rates:1;
+	unsigned int i2s_5rates:1;
+};
+
+/* em28xx has two audio inputs: tuner and line in.
+   However, on most devices, an auxiliary AC97 codec device is used.
+   The AC97 device may have several different inputs and outputs,
+   depending on their model. So, it is possible to use AC97 mixer to
+   address more than two different entries.
+ */
 enum em28xx_amux {
-	EM28XX_AMUX_VIDEO,
-	EM28XX_AMUX_LINE_IN,
-	EM28XX_AMUX_AC97_VIDEO,
-	EM28XX_AMUX_AC97_LINE_IN,
+	/* This is the only entry for em28xx tuner input */
+	EM28XX_AMUX_VIDEO,	/* em28xx tuner, AC97 mixer Video */
+
+	EM28XX_AMUX_LINE_IN,	/* AC97 mixer Line In */
+
+	/* Some less-common mixer setups */
+	EM28XX_AMUX_VIDEO2,	/* em28xx Line in, AC97 mixer Video */
+	EM28XX_AMUX_PHONE,
+	EM28XX_AMUX_MIC,
+	EM28XX_AMUX_CD,
+	EM28XX_AMUX_AUX,
+	EM28XX_AMUX_PCM_OUT,
 };
 
 struct em28xx_input {
@@ -269,6 +305,7 @@ struct em28xx_input {
 #define INPUT(nr) (&em28xx_boards[dev->model].input[nr])
 
 enum em28xx_decoder {
+	EM28XX_NODECODER,
 	EM28XX_TVP5150,
 	EM28XX_SAA7113,
 	EM28XX_SAA7114
@@ -284,6 +321,7 @@ struct em28xx_board {
 	char *name;
 	int vchannels;
 	int tuner_type;
+	int tuner_addr;
 
 	/* i2c flags */
 	unsigned int tda9887_conf;
@@ -301,6 +339,7 @@ struct em28xx_board {
 
 	struct em28xx_input       input[MAX_EM28XX_INPUT];
 	struct em28xx_input	  radio;
+	IR_KEYTAB_TYPE            *ir_codes;
 };
 
 struct em28xx_eeprom {
@@ -375,17 +414,21 @@ struct em28xx {
 	char name[30];		/* name (including minor) of the device */
 	int model;		/* index in the device_data struct */
 	int devno;		/* marks the number of this device */
+	enum em28xx_chip_id chip_id;
 	unsigned int is_em2800:1;
 	unsigned int has_msp34xx:1;
 	unsigned int has_tda9887:1;
 	unsigned int stream_on:1;	/* Locks streams */
 	unsigned int has_audio_class:1;
+	unsigned int has_alsa_audio:1;
 	unsigned int has_12mhz_i2s:1;
 	unsigned int max_range_640_480:1;
 	unsigned int has_dvb:1;
 	unsigned int has_snapshot_button:1;
 	unsigned int valid:1;		/* report for validated boards */
 
+	struct em28xx_IR *ir;
+
 	/* Some older em28xx chips needs a waiting time after writing */
 	unsigned int wait_after_write;
 
@@ -401,6 +444,7 @@ struct em28xx {
 	u32 i2s_speed;		/* I2S speed for audio digital stream */
 
 	enum em28xx_decoder decoder;
+	struct em28xx_audio_mode audio_mode;
 
 	int tuner_type;		/* type of the tuner */
 	int tuner_addr;		/* tuner address */
@@ -439,6 +483,7 @@ struct em28xx {
 
 	/* locks */
 	struct mutex lock;
+	struct mutex ctrl_urb_lock;	/* protects urb_buf */
 	/* spinlock_t queue_lock; */
 	struct list_head inqueue, outqueue;
 	wait_queue_head_t open, wait_frame, wait_stream;
@@ -460,6 +505,8 @@ struct em28xx {
 	unsigned int *alt_max_pkt_size;	/* array of wMaxPacketSize */
 	struct urb *urb[EM28XX_NUM_BUFS];	/* urb for isoc transfers */
 	char *transfer_buffer[EM28XX_NUM_BUFS];	/* transfer buffers for isoc transfer */
+	char urb_buf[URB_MAX_CTRL_SIZE];	/* urb control msg buffer */
+
 	/* helper funcs that call usb_control_msg */
 	int (*em28xx_write_regs) (struct em28xx *dev, u16 reg,
 					char *buf, int len);
@@ -472,9 +519,15 @@ struct em28xx {
 
 	enum em28xx_mode mode;
 
+	/* register numbers for GPO/GPIO registers */
+	u16 reg_gpo_num, reg_gpio_num;
+
 	/* Caches GPO and GPIO registers */
 	unsigned char	reg_gpo, reg_gpio;
 
+	/* Infrared remote control support */
+	IR_KEYTAB_TYPE *ir_codes;
+
 	/* Snapshot button */
 	char snapshot_button_path[30];	/* path of the input dev */
 	struct input_dev *sbutton_input_dev;
@@ -515,7 +568,10 @@ int em28xx_read_reg(struct em28xx *dev, u16 reg);
 int em28xx_write_regs_req(struct em28xx *dev, u8 req, u16 reg, char *buf,
 			  int len);
 int em28xx_write_regs(struct em28xx *dev, u16 reg, char *buf, int len);
+int em28xx_write_reg(struct em28xx *dev, u16 reg, u8 val);
+
 int em28xx_audio_analog_set(struct em28xx *dev);
+int em28xx_audio_setup(struct em28xx *dev);
 
 int em28xx_colorlevels_set_default(struct em28xx *dev);
 int em28xx_capture_start(struct em28xx *dev, int start);
@@ -544,7 +600,6 @@ void em28xx_set_ir(struct em28xx *dev, struct IR_i2c *ir);
 int em28xx_tuner_callback(void *ptr, int component, int command, int arg);
 
 /* Provided by em28xx-input.c */
-/* TODO: Check if the standard get_key handlers on ir-common can be used */
 int em28xx_get_key_terratec(struct IR_i2c *ir, u32 *ir_key, u32 *ir_raw);
 int em28xx_get_key_em_haup(struct IR_i2c *ir, u32 *ir_key, u32 *ir_raw);
 int em28xx_get_key_pinnacle_usb_grey(struct IR_i2c *ir, u32 *ir_key,
@@ -552,6 +607,9 @@ int em28xx_get_key_pinnacle_usb_grey(struct IR_i2c *ir, u32 *ir_key,
 void em28xx_register_snapshot_button(struct em28xx *dev);
 void em28xx_deregister_snapshot_button(struct em28xx *dev);
 
+int em28xx_ir_init(struct em28xx *dev);
+int em28xx_ir_fini(struct em28xx *dev);
+
 /* printk macros */
 
 #define em28xx_err(fmt, arg...) do {\