merge: v4l-dvb

3 files changed, 40 insertions, 5 deletions

diff --git a/linux/drivers/media/video/em28xx/em28xx-audio.c b/linux/drivers/media/video/em28xx/em28xx-audio.c
index f37abcffa..bfa3986f5 100644
--- a/linux/drivers/media/video/em28xx/em28xx-audio.c
+++ b/linux/drivers/media/video/em28xx/em28xx-audio.c
@@ -246,10 +246,12 @@ static int em28xx_cmd(struct em28xx *dev, int cmd, int arg)
 
 	switch (cmd) {
 	case EM28XX_CAPTURE_STREAM_EN:
-		if (dev->adev.capture_stream == STREAM_OFF && arg == EM28XX_START_AUDIO) {
+		if (dev->adev.capture_stream == STREAM_OFF &&
+		    arg == EM28XX_START_AUDIO) {
 			dev->adev.capture_stream = STREAM_ON;
 			em28xx_init_audio_isoc(dev);
-		} else if (dev->adev.capture_stream == STREAM_ON && arg == EM28XX_STOP_AUDIO) {
+		} else if (dev->adev.capture_stream == STREAM_ON &&
+			   arg == EM28XX_STOP_AUDIO) {
 			dev->adev.capture_stream = STREAM_OFF;
 			em28xx_deinit_isoc_audio(dev);
 		} else {
@@ -448,8 +450,8 @@ static int snd_em28xx_capture_trigger(struct snd_pcm_substream *substream,
 	struct em28xx *dev = snd_pcm_substream_chip(substream);
 	int retval;
 
-	dprintk("Should %s capture\n", (cmd == SNDRV_PCM_TRIGGER_START)?
-				       "start": "stop");
+	dprintk("Should %s capture\n", (cmd == SNDRV_PCM_TRIGGER_START) ?
+				       "start" : "stop");
 
 	spin_lock(&dev->adev.slock);
 	switch (cmd) {
diff --git a/linux/drivers/media/video/em28xx/em28xx-cards.c b/linux/drivers/media/video/em28xx/em28xx-cards.c
index 8e285fc84..5af4c417a 100644
--- a/linux/drivers/media/video/em28xx/em28xx-cards.c
+++ b/linux/drivers/media/video/em28xx/em28xx-cards.c
@@ -957,7 +957,7 @@ struct em28xx_board em28xx_boards[] = {
 		} },
 	},
 	[EM2820_BOARD_PINNACLE_DVC_90] = {
-		.name         = "Pinnacle Dazzle DVC 90/DVC 100/DVC 101",
+		.name         = "Pinnacle Dazzle DVC 90/DVC 100/DVC 101/DVC 107",
 		.tuner_type   = TUNER_ABSENT, /* capture only board */
 		.decoder      = EM28XX_SAA711X,
 		.input        = { {
@@ -1362,6 +1362,26 @@ struct em28xx_board em28xx_boards[] = {
 			.amux     = EM28XX_AMUX_LINE_IN,
 		} },
 	},
+	[EM2820_BOARD_IODATA_GVMVP_SZ] = {
+		.name       = "IO-DATA GV-MVP/SZ",
+		.tuner_type   = TUNER_PHILIPS_FM1236_MK3,
+		.tuner_gpio   = default_tuner_gpio,
+		.tda9887_conf = TDA9887_PRESENT,
+		.decoder      = EM28XX_TVP5150,
+		.input        = { {
+			.type     = EM28XX_VMUX_TELEVISION,
+			.vmux     = TVP5150_COMPOSITE0,
+			.amux     = EM28XX_AMUX_VIDEO,
+		}, { /* Composite has not been tested yet */
+			.type     = EM28XX_VMUX_COMPOSITE1,
+			.vmux     = TVP5150_COMPOSITE1,
+			.amux     = EM28XX_AMUX_VIDEO,
+		}, { /* S-video has not been tested yet */
+			.type     = EM28XX_VMUX_SVIDEO,
+			.vmux     = TVP5150_SVIDEO,
+			.amux     = EM28XX_AMUX_VIDEO,
+		} },
+	},
 };
 const unsigned int em28xx_bcount = ARRAY_SIZE(em28xx_boards);
 
@@ -1465,6 +1485,8 @@ struct usb_device_id em28xx_id_table[] = {
 			.driver_info = EM2800_BOARD_LEADTEK_WINFAST_USBII },
 	{ USB_DEVICE(0x093b, 0xa005),
 			.driver_info = EM2861_BOARD_PLEXTOR_PX_TV100U },
+	{ USB_DEVICE(0x04bb, 0x0515),
+			.driver_info = EM2820_BOARD_IODATA_GVMVP_SZ },
 	{ },
 };
 MODULE_DEVICE_TABLE(usb, em28xx_id_table);
@@ -1658,6 +1680,16 @@ void em28xx_pre_card_setup(struct em28xx *dev)
 		em28xx_write_regs(dev, 0x08, "\xf8", 1);
 		break;
 
+	case EM2820_BOARD_IODATA_GVMVP_SZ:
+		em28xx_write_reg(dev, EM28XX_R08_GPIO, 0xff);
+		msleep(70);
+		em28xx_write_reg(dev, EM28XX_R08_GPIO, 0xf7);
+		msleep(10);
+		em28xx_write_reg(dev, EM28XX_R08_GPIO, 0xfe);
+		msleep(70);
+		em28xx_write_reg(dev, EM28XX_R08_GPIO, 0xfd);
+		msleep(70);
+		break;
 	}
 
 	em28xx_gpio_set(dev, dev->board.tuner_gpio);
diff --git a/linux/drivers/media/video/em28xx/em28xx.h b/linux/drivers/media/video/em28xx/em28xx.h
index a0128819d..4aebda6c7 100644
--- a/linux/drivers/media/video/em28xx/em28xx.h
+++ b/linux/drivers/media/video/em28xx/em28xx.h
@@ -102,6 +102,7 @@
 #define EM2820_BOARD_GADMEI_TVR200		  62
 #define EM2860_BOARD_KAIOMY_TVNPC_U2              63
 #define EM2860_BOARD_EASYCAP                      64
+#define EM2820_BOARD_IODATA_GVMVP_SZ		  65
 
 /* Limits minimum and default number of buffers */
 #define EM28XX_MIN_BUF 4