gspca - sonixj: Do the ov7660 sensor work again.

From: Jean-Francois Moine <moinejf@free.fr>

- bad sensor power
- bad edge gain/threshold
- set back the auto gain
- light frequency filter inverted

Priority: high

Signed-off-by: Jean-Francois Moine <moinejf@free.fr>

1 files changed, 13 insertions, 7 deletions

diff --git a/linux/drivers/media/video/gspca/sonixj.c b/linux/drivers/media/video/gspca/sonixj.c
index 98fb39c99..6a668deb1 100644
--- a/linux/drivers/media/video/gspca/sonixj.c
+++ b/linux/drivers/media/video/gspca/sonixj.c
@@ -741,7 +741,7 @@ static const u8 ov7660_sensor_init[][8] = {
 						/* COM 1 BAVE GEAVE AECHH */
 	{0xb1, 0x21, 0x08, 0x83, 0x01, 0x00, 0x00, 0x10}, /* RAVE COM2 */
 	{0xd1, 0x21, 0x0c, 0x00, 0x08, 0x04, 0x4f, 0x10}, /* COM 3 4 5 6 */
-#if 1
+#if 0
 	{0xd1, 0x21, 0x10, 0x7f, 0x40, 0x05, 0xf8, 0x10},
 #else
 	{0xd1, 0x21, 0x10, 0x7f, 0x40, 0x05, 0xff, 0x10},
@@ -795,7 +795,7 @@ static const u8 ov7660_sensor_init[][8] = {
 	{0xc1, 0x21, 0x88, 0xaf, 0xc7, 0xdf, 0x00, 0x10}, /* gamma curve */
 	{0xc1, 0x21, 0x8b, 0x99, 0x99, 0xcf, 0x00, 0x10}, /* reserved */
 	{0xb1, 0x21, 0x92, 0x00, 0x00, 0x00, 0x00, 0x10}, /* DM_LNL/H */
-	{0xb1, 0x21, 0xa1, 0x00, 0x00, 0x00, 0x00, 0x10},
+	{0xa1, 0x21, 0xa1, 0x00, 0x00, 0x00, 0x00, 0x10},
 /****** (some exchanges in the win trace) ******/
 	{0xa1, 0x21, 0x1e, 0x01, 0x00, 0x00, 0x00, 0x10}, /* MVFP */
 						/* bits[3..0]reserved */
@@ -1165,11 +1165,13 @@ static int configure_gpio(struct gspca_dev *gspca_dev,
 		reg_w1(gspca_dev, 0x01, 0x42);
 		break;
 	case SENSOR_OV7660:
+#if 0
 		reg_w1(gspca_dev, 0x01, 0x61);
 		reg_w1(gspca_dev, 0x17, 0x20);
 		reg_w1(gspca_dev, 0x01, 0x60);
 		reg_w1(gspca_dev, 0x01, 0x40);
 		break;
+#endif
 	case SENSOR_SP80708:
 		reg_w1(gspca_dev, 0x01, 0x63);
 		reg_w1(gspca_dev, 0x17, 0x20);
@@ -1654,6 +1656,8 @@ static void setvflip(struct sd *sd)
 
 static void setinfrared(struct sd *sd)
 {
+	if (sd->gspca_dev.ctrl_dis & (1 << INFRARED_IDX))
+		return;
 /*fixme: different sequence for StarCam Clip and StarCam 370i */
 #if 1
 /* Clip */
@@ -1675,14 +1679,14 @@ static void setfreq(struct gspca_dev *gspca_dev)
 	if (sd->sensor == SENSOR_OV7660) {
 		u8 com8;
 
-#if 1
-		com8 = 0xf8;		/* no auto gain/wb/expo */
+#if 0
+		com8 = 0xd8;		/* no auto gain/wb/expo */
 #else
-		com8 = 0xff;
+		com8 = 0xdf;		/* auto gain/wb/expo */
 #endif
 		switch (sd->freq) {
 		case 0: /* Banding filter disabled */
-			i2c_w1(gspca_dev, 0x13, com8 & 0xdf);
+			i2c_w1(gspca_dev, 0x13, com8 | 0x20);
 			break;
 		case 1: /* 50 hz */
 			i2c_w1(gspca_dev, 0x13, com8);
@@ -1839,12 +1843,14 @@ static int sd_start(struct gspca_dev *gspca_dev)
 		reg_w1(gspca_dev, 0x99, 0x60);
 		break;
 	case SENSOR_OV7660:
+#if 0
 		reg_w1(gspca_dev, 0x9a, 0x05);
 		if (sd->bridge == BRIDGE_SN9C105)
 			reg_w1(gspca_dev, 0x99, 0xff);
 		else
 			reg_w1(gspca_dev, 0x99, 0x5b);
 		break;
+#endif
 	case SENSOR_SP80708:
 		reg_w1(gspca_dev, 0x9a, 0x05);
 		reg_w1(gspca_dev, 0x99, 0x59);
@@ -2373,7 +2379,7 @@ static const __devinitdata struct usb_device_id device_table[] = {
 	{USB_DEVICE(0x0c45, 0x607c), BSI(SN9C102P, HV7131R, 0x11)},
 /*	{USB_DEVICE(0x0c45, 0x607e), BSI(SN9C102P, OV7630, 0x??)}, */
 	{USB_DEVICE(0x0c45, 0x60c0), BSI(SN9C105, MI0360, 0x5d)},
-/*	{USB_DEVICE(0x0c45, 0x60c8), BSI(SN9C105, OM6801, 0x??)}, */
+/*	{USB_DEVICE(0x0c45, 0x60c8), BSI(SN9C105, OM6802, 0x??)}, */
 /*	{USB_DEVICE(0x0c45, 0x60cc), BSI(SN9C105, HV7131GP, 0x??)}, */
 	{USB_DEVICE(0x0c45, 0x60ec), BSI(SN9C105, MO4000, 0x21)},
 /*	{USB_DEVICE(0x0c45, 0x60ef), BSI(SN9C105, ICM105C, 0x??)}, */