sync from main

From: Patrick Boettcher <pb@linuxtv.org>

sync from main

Priority: normal

Signed-off-by: Patrick Boettcher <pb@linuxtv.org>

95 files changed, 2387 insertions, 1591 deletions

diff --git a/linux/drivers/media/common/ir-keymaps.c b/linux/drivers/media/common/ir-keymaps.c
index 6c0a80f45..ee9931f56 100644
--- a/linux/drivers/media/common/ir-keymaps.c
+++ b/linux/drivers/media/common/ir-keymaps.c
@@ -2441,6 +2441,67 @@ IR_KEYTAB_TYPE ir_codes_powercolor_real_angel[IR_KEYTAB_SIZE] = {
 };
 EXPORT_SYMBOL_GPL(ir_codes_powercolor_real_angel);
 
+/* Kworld Plus TV Analog Lite PCI IR
+   Mauro Carvalho Chehab <mchehab@infradead.org>
+ */
+IR_KEYTAB_TYPE ir_codes_kworld_plus_tv_analog[IR_KEYTAB_SIZE] = {
+	[0x0c] = KEY_PROG1,		/* Kworld key */
+	[0x16] = KEY_CLOSECD,		/* -> ) */
+	[0x1d] = KEY_POWER2,
+
+	[0x00] = KEY_1,
+	[0x01] = KEY_2,
+	[0x02] = KEY_3,			/* Two keys have the same code: 3 and left */
+	[0x03] = KEY_4,			/* Two keys have the same code: 3 and right */
+	[0x04] = KEY_5,
+	[0x05] = KEY_6,
+	[0x06] = KEY_7,
+	[0x07] = KEY_8,
+	[0x08] = KEY_9,
+	[0x0a] = KEY_0,
+
+	[0x09] = KEY_AGAIN,
+	[0x14] = KEY_MUTE,
+
+	[0x20] = KEY_UP,
+	[0x21] = KEY_DOWN,
+	[0x0b] = KEY_ENTER,
+
+	[0x10] = KEY_CHANNELUP,
+	[0x11] = KEY_CHANNELDOWN,
+
+	/* Couldn't map key left/key right since those
+	   conflict with '3' and '4' scancodes
+	   I dunno what the original driver does
+	 */
+
+	[0x13] = KEY_VOLUMEUP,
+	[0x12] = KEY_VOLUMEDOWN,
+
+	/* The lower part of the IR
+	   There are several duplicated keycodes there.
+	   Most of them conflict with digits.
+	   Add mappings just to the unused scancodes.
+	   Somehow, the original driver has a way to know,
+	   but this doesn't seem to be on some GPIO.
+	   Also, it is not related to the time between keyup
+	   and keydown.
+	 */
+	[0x19] = KEY_PAUSE,		/* Timeshift */
+	[0x1a] = KEY_STOP,
+	[0x1b] = KEY_RECORD,
+
+	[0x22] = KEY_TEXT,
+
+	[0x15] = KEY_AUDIO,		/* ((*)) */
+	[0x0f] = KEY_ZOOM,
+	[0x1c] = KEY_SHUFFLE,		/* snapshot */
+
+	[0x18] = KEY_RED,		/* B */
+	[0x23] = KEY_GREEN,		/* C */
+};
+EXPORT_SYMBOL_GPL(ir_codes_kworld_plus_tv_analog);
+
 IR_KEYTAB_TYPE ir_codes_avermedia_a16d[IR_KEYTAB_SIZE] = {
 	[0x20] = KEY_LIST,
 	[0x00] = KEY_POWER,
diff --git a/linux/drivers/media/common/saa7146_i2c.c b/linux/drivers/media/common/saa7146_i2c.c
index ae20d2729..255b14551 100644
--- a/linux/drivers/media/common/saa7146_i2c.c
+++ b/linux/drivers/media/common/saa7146_i2c.c
@@ -406,6 +406,9 @@ static int saa7146_i2c_xfer(struct i2c_adapter* adapter, struct i2c_msg *msg, in
 static struct i2c_algorithm saa7146_algo = {
 	.master_xfer	= saa7146_i2c_xfer,
 	.functionality	= saa7146_i2c_func,
+#ifdef NEED_ALGO_CONTROL
+	.algo_control = dummy_algo_control,
+#endif
 };
 
 int saa7146_i2c_adapter_prepare(struct saa7146_dev *dev, struct i2c_adapter *i2c_adapter, u32 bitrate)
diff --git a/linux/drivers/media/common/tuners/tda827x.c b/linux/drivers/media/common/tuners/tda827x.c
index 83a017c53..a14fe817d 100644
--- a/linux/drivers/media/common/tuners/tda827x.c
+++ b/linux/drivers/media/common/tuners/tda827x.c
@@ -81,10 +81,11 @@ static void tda827x_set_std(struct dvb_frontend *fe,
 		mode = "xx";
 	}
 
-	if (params->mode == V4L2_TUNER_RADIO)
+	if (params->mode == V4L2_TUNER_RADIO) {
 		priv->sgIF = 88; /* if frequency is 5.5 MHz */
-
-	dprintk("setting tda827x to system %s\n", mode);
+		dprintk("setting tda827x to radio FM\n");
+	} else
+		dprintk("setting tda827x to system %s\n", mode);
 }
 
 
@@ -200,7 +201,7 @@ static int tda827xo_set_params(struct dvb_frontend *fe,
 		fe->ops.i2c_gate_ctrl(fe, 1);
 	i2c_transfer(priv->i2c_adap, &msg, 1);
 
-	priv->frequency = tuner_freq - if_freq; // FIXME
+	priv->frequency = params->frequency;
 	priv->bandwidth = (fe->ops.info.type == FE_OFDM) ? params->u.ofdm.bandwidth : 0;
 
 	return 0;
@@ -305,7 +306,7 @@ static int tda827xo_set_analog_params(struct dvb_frontend *fe,
 	reg2[1] = 0x08;   /* Vsync en */
 	i2c_transfer(priv->i2c_adap, &msg, 1);
 
-	priv->frequency = freq * 62500;
+	priv->frequency = params->frequency;
 
 	return 0;
 }
@@ -592,7 +593,7 @@ static int tda827xa_set_params(struct dvb_frontend *fe,
 		fe->ops.i2c_gate_ctrl(fe, 1);
 	i2c_transfer(priv->i2c_adap, &msg, 1);
 
-	priv->frequency = tuner_freq - if_freq; // FIXME
+	priv->frequency = params->frequency;
 	priv->bandwidth = (fe->ops.info.type == FE_OFDM) ? params->u.ofdm.bandwidth : 0;
 
 	return 0;
@@ -692,7 +693,7 @@ static int tda827xa_set_analog_params(struct dvb_frontend *fe,
 	tuner_reg[1] = 0x19 + (priv->lpsel << 1);
 	i2c_transfer(priv->i2c_adap, &msg, 1);
 
-	priv->frequency = freq * 62500;
+	priv->frequency = params->frequency;
 
 	return 0;
 }
diff --git a/linux/drivers/media/common/tuners/tda8290.c b/linux/drivers/media/common/tuners/tda8290.c
index 637849ec8..6eaaacca0 100644
--- a/linux/drivers/media/common/tuners/tda8290.c
+++ b/linux/drivers/media/common/tuners/tda8290.c
@@ -33,6 +33,9 @@ static int debug;
 module_param(debug, int, 0644);
 MODULE_PARM_DESC(debug, "enable verbose debug messages");
 
+static int deemphasis_50;
+MODULE_PARM_DESC(deemphasis_50, "0 - 75us deemphasis; 1 - 50us deemphasis");
+
 /* ---------------------------------------------------------------------- */
 
 struct tda8290_priv {
@@ -162,9 +165,34 @@ static void set_audio(struct dvb_frontend *fe,
 		mode = "xx";
 	}
 
-	tuner_dbg("setting tda829x to system %s\n", mode);
+	if (params->mode == V4L2_TUNER_RADIO) {
+		priv->tda8290_easy_mode = 0x01;		/* Start with MN values */
+		tuner_dbg("setting to radio FM\n");
+	} else {
+		tuner_dbg("setting tda829x to system %s\n", mode);
+	}
 }
 
+struct {
+	unsigned char seq[2];
+} fm_mode[] = {
+	{ { 0x01, 0x81} },	/* Put device into expert mode */
+	{ { 0x03, 0x48} },	/* Disable NOTCH and VIDEO filters */
+	{ { 0x04, 0x04} },	/* Disable color carrier filter (SSIF) */
+	{ { 0x05, 0x04} },	/* ADC headroom */
+	{ { 0x06, 0x10} },	/* group delay flat */
+
+	{ { 0x07, 0x00} },	/* use the same radio DTO values as a tda8295 */
+	{ { 0x08, 0x00} },
+	{ { 0x09, 0x80} },
+	{ { 0x0a, 0xda} },
+	{ { 0x0b, 0x4b} },
+	{ { 0x0c, 0x68} },
+
+	{ { 0x0d, 0x00} },	/* PLL off, no video carrier detect */
+	{ { 0x14, 0x00} },	/* disable auto mute if no video */
+};
+
 static void tda8290_set_params(struct dvb_frontend *fe,
 			       struct analog_parameters *params)
 {
@@ -201,15 +229,30 @@ static void tda8290_set_params(struct dvb_frontend *fe,
 	tuner_i2c_xfer_send(&priv->i2c_props, soft_reset, 2);
 	msleep(1);
 
-	expert_mode[1] = priv->tda8290_easy_mode + 0x80;
-	tuner_i2c_xfer_send(&priv->i2c_props, expert_mode, 2);
-	tuner_i2c_xfer_send(&priv->i2c_props, gainset_off, 2);
-	tuner_i2c_xfer_send(&priv->i2c_props, if_agc_spd, 2);
-	if (priv->tda8290_easy_mode & 0x60)
-		tuner_i2c_xfer_send(&priv->i2c_props, adc_head_9, 2);
-	else
-		tuner_i2c_xfer_send(&priv->i2c_props, adc_head_6, 2);
-	tuner_i2c_xfer_send(&priv->i2c_props, pll_bw_nom, 2);
+	if (params->mode == V4L2_TUNER_RADIO) {
+		int i;
+		unsigned char deemphasis[]  = { 0x13, 1 };
+
+		/* FIXME: allow using a different deemphasis */
+
+		if (deemphasis_50)
+			deemphasis[1] = 2;
+
+		for (i = 0; i < ARRAY_SIZE(fm_mode); i++)
+			tuner_i2c_xfer_send(&priv->i2c_props, fm_mode[i].seq, 2);
+
+		tuner_i2c_xfer_send(&priv->i2c_props, deemphasis, 2);
+	} else {
+		expert_mode[1] = priv->tda8290_easy_mode + 0x80;
+		tuner_i2c_xfer_send(&priv->i2c_props, expert_mode, 2);
+		tuner_i2c_xfer_send(&priv->i2c_props, gainset_off, 2);
+		tuner_i2c_xfer_send(&priv->i2c_props, if_agc_spd, 2);
+		if (priv->tda8290_easy_mode & 0x60)
+			tuner_i2c_xfer_send(&priv->i2c_props, adc_head_9, 2);
+		else
+			tuner_i2c_xfer_send(&priv->i2c_props, adc_head_6, 2);
+		tuner_i2c_xfer_send(&priv->i2c_props, pll_bw_nom, 2);
+	}
 
 	tda8290_i2c_bridge(fe, 1);
 
diff --git a/linux/drivers/media/common/tuners/tuner-xc2028.c b/linux/drivers/media/common/tuners/tuner-xc2028.c
index 7f43272ca..9536e3d3b 100644
--- a/linux/drivers/media/common/tuners/tuner-xc2028.c
+++ b/linux/drivers/media/common/tuners/tuner-xc2028.c
@@ -32,6 +32,12 @@ static int debug;
 module_param(debug, int, 0644);
 MODULE_PARM_DESC(debug, "enable verbose debug messages");
 
+static int no_poweroff;
+module_param(no_poweroff, int, 0644);
+MODULE_PARM_DESC(debug, "0 (default) powers device off when not used.\n"
+	"1 keep device energized and with tuner ready all the times.\n"
+	"  Faster, but consumes more power and keeps the device hotter\n");
+
 static char audio_std[8];
 module_param_string(audio_std, audio_std, sizeof(audio_std), 0);
 MODULE_PARM_DESC(audio_std,
@@ -1095,16 +1101,16 @@ static int xc2028_set_params(struct dvb_frontend *fe,
 				T_DIGITAL_TV, type, 0, demod);
 }
 
-#if 0
-/* This is needed at sleep (S1/S3), but not at fe_standby. Otherwise,
-   firmware will be loaded on every open()
- */
 static int xc2028_sleep(struct dvb_frontend *fe)
 {
 	struct xc2028_data *priv = fe->tuner_priv;
 	int rc = 0;
 
-	tuner_dbg("%s called\n", __func__);
+	/* Avoid firmware reload on slow devices */
+	if (no_poweroff)
+		return 0;
+
+	tuner_dbg("Putting xc2028/3028 into poweroff mode.\n");
 
 	mutex_lock(&priv->lock);
 
@@ -1119,7 +1125,6 @@ static int xc2028_sleep(struct dvb_frontend *fe)
 
 	return rc;
 }
-#endif
 
 static int xc2028_dvb_release(struct dvb_frontend *fe)
 {
@@ -1200,9 +1205,7 @@ static const struct dvb_tuner_ops xc2028_dvb_tuner_ops = {
 	.get_frequency     = xc2028_get_frequency,
 	.get_rf_strength   = xc2028_signal,
 	.set_params        = xc2028_set_params,
-#if 0
 	.sleep             = xc2028_sleep,
-#endif
 #if 0
 	int (*get_bandwidth)(struct dvb_frontend *fe, u32 *bandwidth);
 	int (*get_status)(struct dvb_frontend *fe, u32 *status);
diff --git a/linux/drivers/media/dvb/b2c2/flexcop-fe-tuner.c b/linux/drivers/media/dvb/b2c2/flexcop-fe-tuner.c
index a127a4175..5cded3708 100644
--- a/linux/drivers/media/dvb/b2c2/flexcop-fe-tuner.c
+++ b/linux/drivers/media/dvb/b2c2/flexcop-fe-tuner.c
@@ -628,12 +628,14 @@ int flexcop_frontend_init(struct flexcop_device *fc)
 	}
 
 	/* try the cable dvb (stv0297) */
+	fc->fc_i2c_adap[0].no_base_addr = 1;
 	fc->fe = dvb_attach(stv0297_attach, &alps_tdee4_stv0297_config, i2c);
 	if (fc->fe != NULL) {
 		fc->dev_type = FC_CABLE;
 		fc->fe->ops.tuner_ops.set_params = alps_tdee4_stv0297_tuner_set_params;
 		goto fe_found;
 	}
+	fc->fc_i2c_adap[0].no_base_addr = 0;
 
 	/* try the sky v2.3 (vp310/Samsung tbdu18132(tsa5059)) */
 	fc->fe = dvb_attach(mt312_attach,
diff --git a/linux/drivers/media/dvb/b2c2/flexcop-i2c.c b/linux/drivers/media/dvb/b2c2/flexcop-i2c.c
index 43a112ec6..01d27613f 100644
--- a/linux/drivers/media/dvb/b2c2/flexcop-i2c.c
+++ b/linux/drivers/media/dvb/b2c2/flexcop-i2c.c
@@ -47,9 +47,13 @@ static int flexcop_i2c_read4(struct flexcop_i2c_adapter *i2c,
 	int len = r100.tw_sm_c_100.total_bytes, /* remember total_bytes is buflen-1 */
 		ret;
 
-	r100.tw_sm_c_100.no_base_addr_ack_error = i2c->no_base_addr;
 	ret = flexcop_i2c_operation(i2c->fc, &r100);
 	if (ret != 0) {
+		deb_i2c("Retrying operation\n");
+		r100.tw_sm_c_100.no_base_addr_ack_error = i2c->no_base_addr;
+		ret = flexcop_i2c_operation(i2c->fc, &r100);
+	}
+	if (ret != 0) {
 		deb_i2c("read failed. %d\n", ret);
 		return ret;
 	}
@@ -205,6 +209,9 @@ static u32 flexcop_i2c_func(struct i2c_adapter *adapter)
 static struct i2c_algorithm flexcop_algo = {
 	.master_xfer	= flexcop_master_xfer,
 	.functionality	= flexcop_i2c_func,
+#ifdef NEED_ALGO_CONTROL
+	.algo_control = dummy_algo_control,
+#endif
 };
 
 int flexcop_i2c_init(struct flexcop_device *fc)
diff --git a/linux/drivers/media/dvb/dm1105/dm1105.c b/linux/drivers/media/dvb/dm1105/dm1105.c
index 100a7f661..d7034e6a1 100644
--- a/linux/drivers/media/dvb/dm1105/dm1105.c
+++ b/linux/drivers/media/dvb/dm1105/dm1105.c
@@ -330,6 +330,9 @@ static u32 functionality(struct i2c_adapter *adap)
 static struct i2c_algorithm dm1105_algo = {
 	.master_xfer   = dm1105_i2c_xfer,
 	.functionality = functionality,
+#ifdef NEED_ALGO_CONTROL
+	.algo_control = dummy_algo_control,
+#endif
 };
 
 static inline struct dm1105dvb *feed_to_dm1105dvb(struct dvb_demux_feed *feed)
diff --git a/linux/drivers/media/dvb/dvb-usb/af9005.c b/linux/drivers/media/dvb/dvb-usb/af9005.c
index ca5a0a4d2..fdf592625 100644
--- a/linux/drivers/media/dvb/dvb-usb/af9005.c
+++ b/linux/drivers/media/dvb/dvb-usb/af9005.c
@@ -500,6 +500,9 @@ static u32 af9005_i2c_func(struct i2c_adapter *adapter)
 static struct i2c_algorithm af9005_i2c_algo = {
 	.master_xfer = af9005_i2c_xfer,
 	.functionality = af9005_i2c_func,
+#ifdef NEED_ALGO_CONTROL
+	.algo_control = dummy_algo_control,
+#endif
 };
 
 int af9005_send_command(struct dvb_usb_device *d, u8 command, u8 * wbuf,
diff --git a/linux/drivers/media/dvb/dvb-usb/af9015.c b/linux/drivers/media/dvb/dvb-usb/af9015.c
index e6e534e04..f0b57c739 100644
--- a/linux/drivers/media/dvb/dvb-usb/af9015.c
+++ b/linux/drivers/media/dvb/dvb-usb/af9015.c
@@ -318,6 +318,9 @@ static u32 af9015_i2c_func(struct i2c_adapter *adapter)
 static struct i2c_algorithm af9015_i2c_algo = {
 	.master_xfer = af9015_i2c_xfer,
 	.functionality = af9015_i2c_func,
+#ifdef NEED_ALGO_CONTROL
+	.algo_control = dummy_algo_control,
+#endif
 };
 
 static int af9015_do_reg_bit(struct dvb_usb_device *d, u16 addr, u8 bit, u8 op)
diff --git a/linux/drivers/media/dvb/dvb-usb/anysee.c b/linux/drivers/media/dvb/dvb-usb/anysee.c
index cd2edbcaa..90a04266a 100644
--- a/linux/drivers/media/dvb/dvb-usb/anysee.c
+++ b/linux/drivers/media/dvb/dvb-usb/anysee.c
@@ -199,6 +199,9 @@ static u32 anysee_i2c_func(struct i2c_adapter *adapter)
 static struct i2c_algorithm anysee_i2c_algo = {
 	.master_xfer   = anysee_master_xfer,
 	.functionality = anysee_i2c_func,
+#ifdef NEED_ALGO_CONTROL
+	.algo_control = dummy_algo_control,
+#endif
 };
 
 static int anysee_mt352_demod_init(struct dvb_frontend *fe)
diff --git a/linux/drivers/media/dvb/dvb-usb/au6610.c b/linux/drivers/media/dvb/dvb-usb/au6610.c
index eb34cc389..b2400d693 100644
--- a/linux/drivers/media/dvb/dvb-usb/au6610.c
+++ b/linux/drivers/media/dvb/dvb-usb/au6610.c
@@ -119,6 +119,9 @@ static u32 au6610_i2c_func(struct i2c_adapter *adapter)
 static struct i2c_algorithm au6610_i2c_algo = {
 	.master_xfer   = au6610_i2c_xfer,
 	.functionality = au6610_i2c_func,
+#ifdef NEED_ALGO_CONTROL
+	.algo_control = dummy_algo_control,
+#endif
 };
 
 /* Callbacks for DVB USB */
diff --git a/linux/drivers/media/dvb/dvb-usb/cxusb.c b/linux/drivers/media/dvb/dvb-usb/cxusb.c
index 406d7fba3..f467cad8a 100644
--- a/linux/drivers/media/dvb/dvb-usb/cxusb.c
+++ b/linux/drivers/media/dvb/dvb-usb/cxusb.c
@@ -213,6 +213,9 @@ static u32 cxusb_i2c_func(struct i2c_adapter *adapter)
 static struct i2c_algorithm cxusb_i2c_algo = {
 	.master_xfer   = cxusb_i2c_xfer,
 	.functionality = cxusb_i2c_func,
+#ifdef NEED_ALGO_CONTROL
+	.algo_control = dummy_algo_control,
+#endif
 };
 
 static int cxusb_power_ctrl(struct dvb_usb_device *d, int onoff)
diff --git a/linux/drivers/media/dvb/dvb-usb/dib0700_core.c b/linux/drivers/media/dvb/dvb-usb/dib0700_core.c
index 2fbb7049a..807bff0e1 100644
--- a/linux/drivers/media/dvb/dvb-usb/dib0700_core.c
+++ b/linux/drivers/media/dvb/dvb-usb/dib0700_core.c
@@ -252,6 +252,9 @@ static u32 dib0700_i2c_func(struct i2c_adapter *adapter)
 struct i2c_algorithm dib0700_i2c_algo = {
 	.master_xfer   = dib0700_i2c_xfer,
 	.functionality = dib0700_i2c_func,
+#ifdef NEED_ALGO_CONTROL
+	.algo_control = dummy_algo_control,
+#endif
 };
 
 int dib0700_identify_state(struct usb_device *udev, struct dvb_usb_device_properties *props,
diff --git a/linux/drivers/media/dvb/dvb-usb/dib0700_devices.c b/linux/drivers/media/dvb/dvb-usb/dib0700_devices.c
index f28d3ae59..391732788 100644
--- a/linux/drivers/media/dvb/dvb-usb/dib0700_devices.c
+++ b/linux/drivers/media/dvb/dvb-usb/dib0700_devices.c
@@ -446,13 +446,13 @@ static int stk7700ph_tuner_attach(struct dvb_usb_adapter *adap)
 		== NULL ? -ENODEV : 0;
 }
 
-#define DEFAULT_RC_INTERVAL 150
+#define DEFAULT_RC_INTERVAL 50
 
 static u8 rc_request[] = { REQUEST_POLL_RC, 0 };
 
 /* Number of keypresses to ignore before start repeating */
-#define RC_REPEAT_DELAY 2
-#define RC_REPEAT_DELAY_V1_20 5
+#define RC_REPEAT_DELAY 6
+#define RC_REPEAT_DELAY_V1_20 10
 
 
 
diff --git a/linux/drivers/media/dvb/dvb-usb/dibusb-common.c b/linux/drivers/media/dvb/dvb-usb/dibusb-common.c
index 8ee6cd4da..d774879df 100644
--- a/linux/drivers/media/dvb/dvb-usb/dibusb-common.c
+++ b/linux/drivers/media/dvb/dvb-usb/dibusb-common.c
@@ -155,6 +155,9 @@ static u32 dibusb_i2c_func(struct i2c_adapter *adapter)
 struct i2c_algorithm dibusb_i2c_algo = {
 	.master_xfer   = dibusb_i2c_xfer,
 	.functionality = dibusb_i2c_func,
+#ifdef NEED_ALGO_CONTROL
+	.algo_control = dummy_algo_control,
+#endif
 };
 EXPORT_SYMBOL(dibusb_i2c_algo);
 
diff --git a/linux/drivers/media/dvb/dvb-usb/digitv.c b/linux/drivers/media/dvb/dvb-usb/digitv.c
index b545cf3ea..3a560dcdd 100644
--- a/linux/drivers/media/dvb/dvb-usb/digitv.c
+++ b/linux/drivers/media/dvb/dvb-usb/digitv.c
@@ -83,6 +83,9 @@ static u32 digitv_i2c_func(struct i2c_adapter *adapter)
 static struct i2c_algorithm digitv_i2c_algo = {
 	.master_xfer   = digitv_i2c_xfer,
 	.functionality = digitv_i2c_func,
+#ifdef NEED_ALGO_CONTROL
+	.algo_control = dummy_algo_control,
+#endif
 };
 
 /* Callbacks for DVB USB */
diff --git a/linux/drivers/media/dvb/dvb-usb/dtv5100.c b/linux/drivers/media/dvb/dvb-usb/dtv5100.c
index 078ce92ca..e07a805f6 100644
--- a/linux/drivers/media/dvb/dvb-usb/dtv5100.c
+++ b/linux/drivers/media/dvb/dvb-usb/dtv5100.c
@@ -104,6 +104,9 @@ static u32 dtv5100_i2c_func(struct i2c_adapter *adapter)
 static struct i2c_algorithm dtv5100_i2c_algo = {
 	.master_xfer   = dtv5100_i2c_xfer,
 	.functionality = dtv5100_i2c_func,
+#ifdef NEED_ALGO_CONTROL
+	.algo_control = dummy_algo_control,
+#endif
 };
 
 /* Callbacks for DVB USB */
diff --git a/linux/drivers/media/dvb/dvb-usb/dw2102.c b/linux/drivers/media/dvb/dvb-usb/dw2102.c
index bc5e47a2b..2b8ee587b 100644
--- a/linux/drivers/media/dvb/dvb-usb/dw2102.c
+++ b/linux/drivers/media/dvb/dvb-usb/dw2102.c
@@ -368,21 +368,33 @@ static u32 dw210x_i2c_func(struct i2c_adapter *adapter)
 static struct i2c_algorithm dw2102_i2c_algo = {
 	.master_xfer = dw2102_i2c_transfer,
 	.functionality = dw210x_i2c_func,
+#ifdef NEED_ALGO_CONTROL
+	.algo_control = dummy_algo_control,
+#endif
 };
 
 static struct i2c_algorithm dw2102_serit_i2c_algo = {
 	.master_xfer = dw2102_serit_i2c_transfer,
 	.functionality = dw210x_i2c_func,
+#ifdef NEED_ALGO_CONTROL
+	.algo_control = dummy_algo_control,
+#endif
 };
 
 static struct i2c_algorithm dw2102_earda_i2c_algo = {
 	.master_xfer = dw2102_earda_i2c_transfer,
 	.functionality = dw210x_i2c_func,
+#ifdef NEED_ALGO_CONTROL
+	.algo_control = dummy_algo_control,
+#endif
 };
 
 static struct i2c_algorithm dw2104_i2c_algo = {
 	.master_xfer = dw2104_i2c_transfer,
 	.functionality = dw210x_i2c_func,
+#ifdef NEED_ALGO_CONTROL
+	.algo_control = dummy_algo_control,
+#endif
 };
 
 static int dw210x_read_mac_address(struct dvb_usb_device *d, u8 mac[6])
@@ -660,7 +672,7 @@ static int dw2102_load_firmware(struct usb_device *dev,
 			/* check STV0299 frontend  */
 			dw210x_op_rw(dev, 0xb5, 0, 0, &reset16[0], 2,
 					DW210X_READ_MSG);
-			if (reset16[0] == 0xa1) {
+			if ((reset16[0] == 0xa1) || (reset16[0] == 0x80)) {
 				dw2102_properties.i2c_algo = &dw2102_i2c_algo;
 				dw2102_properties.adapter->tuner_attach = &dw2102_tuner_attach;
 				break;
diff --git a/linux/drivers/media/dvb/dvb-usb/gl861.c b/linux/drivers/media/dvb/dvb-usb/gl861.c
index 6f596ed41..41bec1b58 100644
--- a/linux/drivers/media/dvb/dvb-usb/gl861.c
+++ b/linux/drivers/media/dvb/dvb-usb/gl861.c
@@ -91,6 +91,9 @@ static u32 gl861_i2c_func(struct i2c_adapter *adapter)
 static struct i2c_algorithm gl861_i2c_algo = {
 	.master_xfer   = gl861_i2c_xfer,
 	.functionality = gl861_i2c_func,
+#ifdef NEED_ALGO_CONTROL
+	.algo_control = dummy_algo_control,
+#endif
 };
 
 /* Callbacks for DVB USB */
diff --git a/linux/drivers/media/dvb/dvb-usb/m920x.c b/linux/drivers/media/dvb/dvb-usb/m920x.c
index 54626a0db..51c1c8dba 100644
--- a/linux/drivers/media/dvb/dvb-usb/m920x.c
+++ b/linux/drivers/media/dvb/dvb-usb/m920x.c
@@ -256,6 +256,9 @@ static u32 m920x_i2c_func(struct i2c_adapter *adapter)
 static struct i2c_algorithm m920x_i2c_algo = {
 	.master_xfer   = m920x_i2c_xfer,
 	.functionality = m920x_i2c_func,
+#ifdef NEED_ALGO_CONTROL
+	.algo_control = dummy_algo_control,
+#endif
 };
 
 /* pid filter */
diff --git a/linux/drivers/media/dvb/dvb-usb/opera1.c b/linux/drivers/media/dvb/dvb-usb/opera1.c
index cba064615..d45ceb83b 100644
--- a/linux/drivers/media/dvb/dvb-usb/opera1.c
+++ b/linux/drivers/media/dvb/dvb-usb/opera1.c
@@ -167,6 +167,9 @@ static u32 opera1_i2c_func(struct i2c_adapter *adapter)
 static struct i2c_algorithm opera1_i2c_algo = {
 	.master_xfer = opera1_i2c_xfer,
 	.functionality = opera1_i2c_func,
+#ifdef NEED_ALGO_CONTROL
+	.algo_control = dummy_algo_control,
+#endif
 };
 
 static int opera1_set_voltage(struct dvb_frontend *fe, fe_sec_voltage_t voltage)
diff --git a/linux/drivers/media/dvb/dvb-usb/ttusb2.c b/linux/drivers/media/dvb/dvb-usb/ttusb2.c
index e79a26473..849c59478 100644
--- a/linux/drivers/media/dvb/dvb-usb/ttusb2.c
+++ b/linux/drivers/media/dvb/dvb-usb/ttusb2.c
@@ -124,6 +124,9 @@ static u32 ttusb2_i2c_func(struct i2c_adapter *adapter)
 static struct i2c_algorithm ttusb2_i2c_algo = {
 	.master_xfer   = ttusb2_i2c_xfer,
 	.functionality = ttusb2_i2c_func,
+#ifdef NEED_ALGO_CONTROL
+	.algo_control = dummy_algo_control,
+#endif
 };
 
 /* Callbacks for DVB USB */
diff --git a/linux/drivers/media/dvb/frontends/cx24123.c b/linux/drivers/media/dvb/frontends/cx24123.c
index fb559369e..c9cfc8393 100644
--- a/linux/drivers/media/dvb/frontends/cx24123.c
+++ b/linux/drivers/media/dvb/frontends/cx24123.c
@@ -29,6 +29,7 @@
 
 #include "dvb_frontend.h"
 #include "cx24123.h"
+#include "compat.h"
 
 #define XTAL 10111000
 
@@ -1065,6 +1066,9 @@ static u32 cx24123_tuner_i2c_func(struct i2c_adapter *adapter)
 static struct i2c_algorithm cx24123_tuner_i2c_algo = {
 	.master_xfer   = cx24123_tuner_i2c_tuner_xfer,
 	.functionality = cx24123_tuner_i2c_func,
+#ifdef NEED_ALGO_CONTROL
+	.algo_control = dummy_algo_control,
+#endif
 };
 
 struct i2c_adapter *
diff --git a/linux/drivers/media/dvb/frontends/dibx000_common.c b/linux/drivers/media/dvb/frontends/dibx000_common.c
index a8e3a950c..6f1f41ae3 100644
--- a/linux/drivers/media/dvb/frontends/dibx000_common.c
+++ b/linux/drivers/media/dvb/frontends/dibx000_common.c
@@ -1,6 +1,7 @@
 #include <linux/i2c.h>
 
 #include "dibx000_common.h"
+#include "compat.h"
 
 static int debug;
 module_param(debug, int, 0644);
@@ -107,6 +108,9 @@ static int dibx000_i2c_gated_tuner_xfer(struct i2c_adapter *i2c_adap, struct i2c
 static struct i2c_algorithm dibx000_i2c_gated_tuner_algo = {
 	.master_xfer   = dibx000_i2c_gated_tuner_xfer,
 	.functionality = dibx000_i2c_func,
+#ifdef NEED_ALGO_CONTROL
+	.algo_control = dummy_algo_control,
+#endif
 };
 
 struct i2c_adapter * dibx000_get_i2c_adapter(struct dibx000_i2c_master *mst, enum dibx000_i2c_interface intf, int gating)
diff --git a/linux/drivers/media/dvb/frontends/s5h1420.c b/linux/drivers/media/dvb/frontends/s5h1420.c
index 46d55e393..f357f8233 100644
--- a/linux/drivers/media/dvb/frontends/s5h1420.c
+++ b/linux/drivers/media/dvb/frontends/s5h1420.c
@@ -37,6 +37,7 @@
 #include "dvb_frontend.h"
 #include "s5h1420.h"
 #include "s5h1420_priv.h"
+#include "compat.h"
 
 #define TONE_FREQ 22000
 
@@ -904,6 +905,9 @@ static int s5h1420_tuner_i2c_tuner_xfer(struct i2c_adapter *i2c_adap, struct i2c
 static struct i2c_algorithm s5h1420_tuner_i2c_algo = {
 	.master_xfer   = s5h1420_tuner_i2c_tuner_xfer,
 	.functionality = s5h1420_tuner_i2c_func,
+#ifdef NEED_ALGO_CONTROL
+	.algo_control = dummy_algo_control,
+#endif
 };
 
 struct i2c_adapter *s5h1420_get_tuner_i2c_adapter(struct dvb_frontend *fe)
diff --git a/linux/drivers/media/dvb/siano/sms-cards.c b/linux/drivers/media/dvb/siano/sms-cards.c
index 6f9b77360..fd62e0b85 100644
--- a/linux/drivers/media/dvb/siano/sms-cards.c
+++ b/linux/drivers/media/dvb/siano/sms-cards.c
@@ -38,6 +38,16 @@ struct usb_device_id smsusb_id_table[] = {
 		.driver_info = SMS1XXX_BOARD_HAUPPAUGE_OKEMO_A },
 	{ USB_DEVICE(0x2040, 0x1801),
 		.driver_info = SMS1XXX_BOARD_HAUPPAUGE_OKEMO_B },
+	{ USB_DEVICE(0x2040, 0x2000),
+		.driver_info = SMS1XXX_BOARD_HAUPPAUGE_TIGER_MINICARD },
+	{ USB_DEVICE(0x2040, 0x2009),
+		.driver_info = SMS1XXX_BOARD_HAUPPAUGE_TIGER_MINICARD_R2 },
+	{ USB_DEVICE(0x2040, 0x200a),
+		.driver_info = SMS1XXX_BOARD_HAUPPAUGE_TIGER_MINICARD },
+	{ USB_DEVICE(0x2040, 0x2010),
+		.driver_info = SMS1XXX_BOARD_HAUPPAUGE_TIGER_MINICARD },
+	{ USB_DEVICE(0x2040, 0x2019),
+		.driver_info = SMS1XXX_BOARD_HAUPPAUGE_TIGER_MINICARD },
 	{ USB_DEVICE(0x2040, 0x5500),
 		.driver_info = SMS1XXX_BOARD_HAUPPAUGE_WINDHAM },
 	{ USB_DEVICE(0x2040, 0x5510),
@@ -95,7 +105,22 @@ static struct sms_board sms_boards[] = {
 	[SMS1XXX_BOARD_HAUPPAUGE_WINDHAM] = {
 		.name	= "Hauppauge WinTV MiniStick",
 		.type	= SMS_NOVA_B0,
-		.fw[DEVICE_MODE_DVBT_BDA] = "sms1xxx-hcw-55xxx-dvbt-01.fw",
+		.fw[DEVICE_MODE_DVBT_BDA] = "sms1xxx-hcw-55xxx-dvbt-02.fw",
+		.led_power = 26,
+		.led_lo    = 27,
+		.led_hi    = 28,
+	},
+	[SMS1XXX_BOARD_HAUPPAUGE_TIGER_MINICARD] = {
+		.name	= "Hauppauge WinTV MiniCard",
+		.type	= SMS_NOVA_B0,
+		.fw[DEVICE_MODE_DVBT_BDA] = "sms1xxx-hcw-55xxx-dvbt-02.fw",
+		.lna_ctrl  = 29,
+	},
+	[SMS1XXX_BOARD_HAUPPAUGE_TIGER_MINICARD_R2] = {
+		.name	= "Hauppauge WinTV MiniCard",
+		.type	= SMS_NOVA_B0,
+		.fw[DEVICE_MODE_DVBT_BDA] = "sms1xxx-hcw-55xxx-dvbt-02.fw",
+		.lna_ctrl  = 1,
 	},
 };
 
@@ -106,3 +131,88 @@ struct sms_board *sms_get_board(int id)
 	return &sms_boards[id];
 }
 
+static int sms_set_gpio(struct smscore_device_t *coredev, u32 pin, int enable)
+{
+	int ret;
+	struct smscore_gpio_config gpioconfig = {
+		.direction            = SMS_GPIO_DIRECTION_OUTPUT,
+		.pullupdown           = SMS_GPIO_PULLUPDOWN_NONE,
+		.inputcharacteristics = SMS_GPIO_INPUTCHARACTERISTICS_NORMAL,
+		.outputslewrate       = SMS_GPIO_OUTPUTSLEWRATE_FAST,
+		.outputdriving        = SMS_GPIO_OUTPUTDRIVING_4mA,
+	};
+
+	if (pin == 0)
+		return -EINVAL;
+
+	ret = smscore_configure_gpio(coredev, pin, &gpioconfig);
+
+	if (ret < 0)
+		return ret;
+
+	return smscore_set_gpio(coredev, pin, enable);
+}
+
+int sms_board_setup(struct smscore_device_t *coredev)
+{
+	int board_id = smscore_get_board_id(coredev);
+	struct sms_board *board = sms_get_board(board_id);
+
+	switch (board_id) {
+	case SMS1XXX_BOARD_HAUPPAUGE_WINDHAM:
+		/* turn off all LEDs */
+		sms_set_gpio(coredev, board->led_power, 0);
+		sms_set_gpio(coredev, board->led_hi, 0);
+		sms_set_gpio(coredev, board->led_lo, 0);
+		break;
+	case SMS1XXX_BOARD_HAUPPAUGE_TIGER_MINICARD_R2:
+	case SMS1XXX_BOARD_HAUPPAUGE_TIGER_MINICARD:
+		/* turn off LNA */
+		sms_set_gpio(coredev, board->lna_ctrl, 0);
+		break;
+	}
+	return 0;
+}
+
+int sms_board_power(struct smscore_device_t *coredev, int onoff)
+{
+	int board_id = smscore_get_board_id(coredev);
+	struct sms_board *board = sms_get_board(board_id);
+
+	switch (board_id) {
+	case SMS1XXX_BOARD_HAUPPAUGE_WINDHAM:
+		/* power LED */
+		sms_set_gpio(coredev,
+			     board->led_power, onoff ? 1 : 0);
+		break;
+	case SMS1XXX_BOARD_HAUPPAUGE_TIGER_MINICARD_R2:
+	case SMS1XXX_BOARD_HAUPPAUGE_TIGER_MINICARD:
+		/* LNA */
+		sms_set_gpio(coredev,
+			     board->lna_ctrl, onoff ? 1 : 0);
+		break;
+	}
+	return 0;
+}
+
+int sms_board_led_feedback(struct smscore_device_t *coredev, int led)
+{
+	int board_id = smscore_get_board_id(coredev);
+	struct sms_board *board = sms_get_board(board_id);
+
+	/* dont touch GPIO if LEDs are already set */
+	if (smscore_led_state(coredev, -1) == led)
+		return 0;
+
+	switch (board_id) {
+	case SMS1XXX_BOARD_HAUPPAUGE_WINDHAM:
+		sms_set_gpio(coredev,
+			     board->led_lo, (led & SMS_LED_LO) ? 1 : 0);
+		sms_set_gpio(coredev,
+			     board->led_hi, (led & SMS_LED_HI) ? 1 : 0);
+
+		smscore_led_state(coredev, led);
+		break;
+	}
+	return 0;
+}
diff --git a/linux/drivers/media/dvb/siano/sms-cards.h b/linux/drivers/media/dvb/siano/sms-cards.h
index c8f3da6f9..8e0fe9fd2 100644
--- a/linux/drivers/media/dvb/siano/sms-cards.h
+++ b/linux/drivers/media/dvb/siano/sms-cards.h
@@ -32,14 +32,27 @@
 #define SMS1XXX_BOARD_HAUPPAUGE_OKEMO_A 6
 #define SMS1XXX_BOARD_HAUPPAUGE_OKEMO_B 7
 #define SMS1XXX_BOARD_HAUPPAUGE_WINDHAM 8
+#define SMS1XXX_BOARD_HAUPPAUGE_TIGER_MINICARD 9
+#define SMS1XXX_BOARD_HAUPPAUGE_TIGER_MINICARD_R2 10
 
 struct sms_board {
 	enum sms_device_type_st type;
 	char *name, *fw[DEVICE_MODE_MAX];
+
+	/* gpios */
+	int led_power, led_hi, led_lo, lna_ctrl;
 };
 
 struct sms_board *sms_get_board(int id);
 
+int sms_board_setup(struct smscore_device_t *coredev);
+
+#define SMS_LED_OFF 0
+#define SMS_LED_LO  1
+#define SMS_LED_HI  2
+int sms_board_led_feedback(struct smscore_device_t *coredev, int led);
+int sms_board_power(struct smscore_device_t *coredev, int onoff);
+
 extern struct usb_device_id smsusb_id_table[];
 
 #endif /* __SMS_CARDS_H__ */
diff --git a/linux/drivers/media/dvb/siano/smscoreapi.c b/linux/drivers/media/dvb/siano/smscoreapi.c
index 700a0a6a7..b19dd9c7d 100644
--- a/linux/drivers/media/dvb/siano/smscoreapi.c
+++ b/linux/drivers/media/dvb/siano/smscoreapi.c
@@ -91,6 +91,7 @@ struct smscore_device_t {
 	struct completion init_device_done, reload_start_done, resume_done;
 
 	int board_id;
+	int led_state;
 };
 
 void smscore_set_board_id(struct smscore_device_t *core, int id)
@@ -98,6 +99,13 @@ void smscore_set_board_id(struct smscore_device_t *core, int id)
 	core->board_id = id;
 }
 
+int smscore_led_state(struct smscore_device_t *core, int led)
+{
+	if (led >= 0)
+		core->led_state = led;
+	return core->led_state;
+}
+
 int smscore_get_board_id(struct smscore_device_t *core)
 {
 	return core->board_id;
@@ -1248,6 +1256,76 @@ static int smscore_map_common_buffer(struct smscore_device_t *coredev,
 }
 #endif
 
+int smscore_configure_gpio(struct smscore_device_t *coredev, u32 pin,
+			   struct smscore_gpio_config *pinconfig)
+{
+	struct {
+		struct SmsMsgHdr_ST hdr;
+		u32 data[6];
+	} msg;
+
+	if (coredev->device_flags & SMS_DEVICE_FAMILY2) {
+		msg.hdr.msgSrcId = DVBT_BDA_CONTROL_MSG_ID;
+		msg.hdr.msgDstId = HIF_TASK;
+		msg.hdr.msgFlags = 0;
+		msg.hdr.msgType  = MSG_SMS_GPIO_CONFIG_EX_REQ;
+		msg.hdr.msgLength = sizeof(msg);
+
+		msg.data[0] = pin;
+		msg.data[1] = pinconfig->pullupdown;
+
+		/* Convert slew rate for Nova: Fast(0) = 3 / Slow(1) = 0; */
+		msg.data[2] = pinconfig->outputslewrate == 0 ? 3 : 0;
+
+		switch (pinconfig->outputdriving) {
+		case SMS_GPIO_OUTPUTDRIVING_16mA:
+			msg.data[3] = 7; /* Nova - 16mA */
+			break;
+		case SMS_GPIO_OUTPUTDRIVING_12mA:
+			msg.data[3] = 5; /* Nova - 11mA */
+			break;
+		case SMS_GPIO_OUTPUTDRIVING_8mA:
+			msg.data[3] = 3; /* Nova - 7mA */
+			break;
+		case SMS_GPIO_OUTPUTDRIVING_4mA:
+		default:
+			msg.data[3] = 2; /* Nova - 4mA */
+			break;
+		}
+
+		msg.data[4] = pinconfig->direction;
+		msg.data[5] = 0;
+	} else /* TODO: SMS_DEVICE_FAMILY1 */
+		return -EINVAL;
+
+	return coredev->sendrequest_handler(coredev->context,
+					    &msg, sizeof(msg));
+}
+
+int smscore_set_gpio(struct smscore_device_t *coredev, u32 pin, int level)
+{
+	struct {
+		struct SmsMsgHdr_ST hdr;
+		u32 data[3];
+	} msg;
+
+	if (pin > MAX_GPIO_PIN_NUMBER)
+		return -EINVAL;
+
+	msg.hdr.msgSrcId = DVBT_BDA_CONTROL_MSG_ID;
+	msg.hdr.msgDstId = HIF_TASK;
+	msg.hdr.msgFlags = 0;
+	msg.hdr.msgType  = MSG_SMS_GPIO_SET_LEVEL_REQ;
+	msg.hdr.msgLength = sizeof(msg);
+
+	msg.data[0] = pin;
+	msg.data[1] = level ? 1 : 0;
+	msg.data[2] = 0;
+
+	return coredev->sendrequest_handler(coredev->context,
+					    &msg, sizeof(msg));
+}
+
 static int __init smscore_module_init(void)
 {
 	int rc = 0;
diff --git a/linux/drivers/media/dvb/siano/smscoreapi.h b/linux/drivers/media/dvb/siano/smscoreapi.h
index 3bba565d7..1ab277767 100644
--- a/linux/drivers/media/dvb/siano/smscoreapi.h
+++ b/linux/drivers/media/dvb/siano/smscoreapi.h
@@ -187,6 +187,8 @@ struct smsclient_params_t {
 #define MSG_SW_RELOAD_EXEC_REQ				704
 #define MSG_SW_RELOAD_EXEC_RES				705
 #define MSG_SMS_SPI_INT_LINE_SET_REQ		710
+#define MSG_SMS_GPIO_CONFIG_EX_REQ			712
+#define MSG_SMS_GPIO_CONFIG_EX_RES			713
 #define MSG_SMS_ISDBT_TUNE_REQ				776
 #define MSG_SMS_ISDBT_TUNE_RES				777
 
@@ -481,18 +483,6 @@ struct SMSHOSTLIB_STATISTICS_DVB_ST {
 
 };
 
-struct SMSHOSTLIB_GPIO_CONFIG_ST {
-	u8	Direction; /* GPIO direction: Input - 0, Output - 1 */
-	u8	PullUpDown; /* PullUp/PullDown: None - 0,
-			     * PullDown - 1, PullUp - 2, Keeper - 3 */
-	u8	InputCharacteristics; /* Input Characteristics: Normal - 0,
-				       * Schmitt trigger - 1 */
-	u8	OutputSlewRate; /* Output Slew Rate:
-				 * Fast slew rate - 0, Slow slew rate - 1 */
-	u8	OutputDriving; /* Output driving capability:
-				* 4mA - 0, 8mA - 1, 12mA - 2, 16mA - 3 */
-};
-
 struct SMSHOSTLIB_I2C_REQ_ST {
 	u32	DeviceAddress; /* I2c device address */
 	u32	WriteCount; /* number of bytes to write */
@@ -507,6 +497,32 @@ struct SMSHOSTLIB_I2C_RES_ST {
 };
 #endif
 
+struct smscore_gpio_config {
+#define SMS_GPIO_DIRECTION_INPUT  0
+#define SMS_GPIO_DIRECTION_OUTPUT 1
+	u8 direction;
+
+#define SMS_GPIO_PULLUPDOWN_NONE     0
+#define SMS_GPIO_PULLUPDOWN_PULLDOWN 1
+#define SMS_GPIO_PULLUPDOWN_PULLUP   2
+#define SMS_GPIO_PULLUPDOWN_KEEPER   3
+	u8 pullupdown;
+
+#define SMS_GPIO_INPUTCHARACTERISTICS_NORMAL  0
+#define SMS_GPIO_INPUTCHARACTERISTICS_SCHMITT 1
+	u8 inputcharacteristics;
+
+#define SMS_GPIO_OUTPUTSLEWRATE_FAST 0
+#define SMS_GPIO_OUTPUTSLEWRATE_SLOW 1
+	u8 outputslewrate;
+
+#define SMS_GPIO_OUTPUTDRIVING_4mA  0
+#define SMS_GPIO_OUTPUTDRIVING_8mA  1
+#define SMS_GPIO_OUTPUTDRIVING_12mA 2
+#define SMS_GPIO_OUTPUTDRIVING_16mA 3
+	u8 outputdriving;
+};
+
 struct smsdvb_client_t {
 	struct list_head entry;
 
@@ -519,7 +535,7 @@ struct smsdvb_client_t {
 	struct dvb_frontend	frontend;
 
 	fe_status_t		fe_status;
-	int			fe_ber, fe_snr, fe_signal_strength;
+	int			fe_ber, fe_snr, fe_unc, fe_signal_strength;
 
 	struct completion	tune_done, stat_done;
 
@@ -567,9 +583,15 @@ struct smscore_buffer_t *smscore_getbuffer(struct smscore_device_t *coredev);
 extern void smscore_putbuffer(struct smscore_device_t *coredev,
 			      struct smscore_buffer_t *cb);
 
+int smscore_configure_gpio(struct smscore_device_t *coredev, u32 pin,
+			   struct smscore_gpio_config *pinconfig);
+int smscore_set_gpio(struct smscore_device_t *coredev, u32 pin, int level);
+
 void smscore_set_board_id(struct smscore_device_t *core, int id);
 int smscore_get_board_id(struct smscore_device_t *core);
 
+int smscore_led_state(struct smscore_device_t *core, int led);
+
 /* smsdvb.c */
 int smsdvb_register(void);
 void smsdvb_unregister(void);
diff --git a/linux/drivers/media/dvb/siano/smsdvb.c b/linux/drivers/media/dvb/siano/smsdvb.c
index f2a6c6f9e..bbc87fe2e 100644
--- a/linux/drivers/media/dvb/siano/smsdvb.c
+++ b/linux/drivers/media/dvb/siano/smsdvb.c
@@ -60,6 +60,7 @@ static int smsdvb_onresponse(void *context, struct smscore_buffer_t *cb)
 
 			client->fe_snr = p->Stat.SNR;
 			client->fe_ber = p->Stat.BER;
+			client->fe_unc = p->Stat.BERErrorCount;
 
 			if (p->Stat.InBandPwr < -95)
 				client->fe_signal_strength = 0;
@@ -72,6 +73,7 @@ static int smsdvb_onresponse(void *context, struct smscore_buffer_t *cb)
 			client->fe_status = 0;
 			client->fe_snr =
 			client->fe_ber =
+			client->fe_unc =
 			client->fe_signal_strength = 0;
 		}
 
@@ -165,8 +167,18 @@ static int smsdvb_send_statistics_request(struct smsdvb_client_t *client)
 	struct SmsMsgHdr_ST Msg = { MSG_SMS_GET_STATISTICS_REQ,
 			     DVBT_BDA_CONTROL_MSG_ID,
 			     HIF_TASK, sizeof(struct SmsMsgHdr_ST), 0 };
-	return smsdvb_sendrequest_and_wait(client, &Msg, sizeof(Msg),
-					   &client->stat_done);
+	int ret = smsdvb_sendrequest_and_wait(client, &Msg, sizeof(Msg),
+					      &client->stat_done);
+	if (ret < 0)
+		return ret;
+
+	if (client->fe_status & FE_HAS_LOCK)
+		sms_board_led_feedback(client->coredev,
+				       (client->fe_unc == 0) ?
+				       SMS_LED_HI : SMS_LED_LO);
+	else
+		sms_board_led_feedback(client->coredev, SMS_LED_OFF);
+	return ret;
 }
 
 static int smsdvb_read_status(struct dvb_frontend *fe, fe_status_t *stat)
@@ -217,6 +229,18 @@ static int smsdvb_read_snr(struct dvb_frontend *fe, u16 *snr)
 	return rc;
 }
 
+static int smsdvb_read_ucblocks(struct dvb_frontend *fe, u32 *ucblocks)
+{
+	struct smsdvb_client_t *client =
+		container_of(fe, struct smsdvb_client_t, frontend);
+	int rc = smsdvb_send_statistics_request(client);
+
+	if (!rc)
+		*ucblocks = client->fe_unc;
+
+	return rc;
+}
+
 static int smsdvb_get_tune_settings(struct dvb_frontend *fe,
 				    struct dvb_frontend_tune_settings *tune)
 {
@@ -276,6 +300,28 @@ static int smsdvb_get_frontend(struct dvb_frontend *fe,
 	/* todo: */
 	memcpy(fep, &client->fe_params,
 	       sizeof(struct dvb_frontend_parameters));
+
+	return 0;
+}
+
+static int smsdvb_init(struct dvb_frontend *fe)
+{
+	struct smsdvb_client_t *client =
+		container_of(fe, struct smsdvb_client_t, frontend);
+
+	sms_board_power(client->coredev, 1);
+
+	return 0;
+}
+
+static int smsdvb_sleep(struct dvb_frontend *fe)
+{
+	struct smsdvb_client_t *client =
+		container_of(fe, struct smsdvb_client_t, frontend);
+
+	sms_board_led_feedback(client->coredev, SMS_LED_OFF);
+	sms_board_power(client->coredev, 0);
+
 	return 0;
 }
 
@@ -311,6 +357,10 @@ static struct dvb_frontend_ops smsdvb_fe_ops = {
 	.read_ber = smsdvb_read_ber,
 	.read_signal_strength = smsdvb_read_signal_strength,
 	.read_snr = smsdvb_read_snr,
+	.read_ucblocks = smsdvb_read_ucblocks,
+
+	.init = smsdvb_init,
+	.sleep = smsdvb_sleep,
 };
 
 static int smsdvb_hotplug(struct smscore_device_t *coredev,
@@ -411,6 +461,8 @@ static int smsdvb_hotplug(struct smscore_device_t *coredev,
 
 	sms_info("success");
 
+	sms_board_setup(coredev);
+
 	return 0;
 
 client_error:
diff --git a/linux/drivers/media/dvb/siano/smsusb.c b/linux/drivers/media/dvb/siano/smsusb.c
index a50ea8259..fd191b0ef 100644
--- a/linux/drivers/media/dvb/siano/smsusb.c
+++ b/linux/drivers/media/dvb/siano/smsusb.c
@@ -436,11 +436,56 @@ static void smsusb_disconnect(struct usb_interface *intf)
 	smsusb_term_device(intf);
 }
 
+static int smsusb_suspend(struct usb_interface *intf, pm_message_t msg)
+{
+	struct smsusb_device_t *dev =
+		(struct smsusb_device_t *)usb_get_intfdata(intf);
+	printk(KERN_INFO "%s  Entering status %d.\n", __func__, msg.event);
+	smsusb_stop_streaming(dev);
+	return 0;
+}
+
+static int smsusb_resume(struct usb_interface *intf)
+{
+	int rc, i;
+	struct smsusb_device_t *dev =
+		(struct smsusb_device_t *)usb_get_intfdata(intf);
+	struct usb_device *udev = interface_to_usbdev(intf);
+
+	printk(KERN_INFO "%s  Entering.\n", __func__);
+	usb_clear_halt(udev, usb_rcvbulkpipe(udev, 0x81));
+	usb_clear_halt(udev, usb_rcvbulkpipe(udev, 0x02));
+
+	for (i = 0; i < intf->cur_altsetting->desc.bNumEndpoints; i++)
+		printk(KERN_INFO "endpoint %d %02x %02x %d\n", i,
+		       intf->cur_altsetting->endpoint[i].desc.bEndpointAddress,
+		       intf->cur_altsetting->endpoint[i].desc.bmAttributes,
+		       intf->cur_altsetting->endpoint[i].desc.wMaxPacketSize);
+
+	if (intf->num_altsetting > 0) {
+		rc = usb_set_interface(udev,
+				       intf->cur_altsetting->desc.
+				       bInterfaceNumber, 0);
+		if (rc < 0) {
+			printk(KERN_INFO
+			       "%s usb_set_interface failed, rc %d\n",
+			       __func__, rc);
+			return rc;
+		}
+	}
+
+	smsusb_start_streaming(dev);
+	return 0;
+}
+
 static struct usb_driver smsusb_driver = {
 	.name			= "sms1xxx",
 	.probe			= smsusb_probe,
 	.disconnect		= smsusb_disconnect,
 	.id_table		= smsusb_id_table,
+
+	.suspend		= smsusb_suspend,
+	.resume			= smsusb_resume,
 };
 
 int smsusb_register(void)
diff --git a/linux/drivers/media/dvb/ttusb-budget/dvb-ttusb-budget.c b/linux/drivers/media/dvb/ttusb-budget/dvb-ttusb-budget.c
index 8775b78af..086b9987f 100644
--- a/linux/drivers/media/dvb/ttusb-budget/dvb-ttusb-budget.c
+++ b/linux/drivers/media/dvb/ttusb-budget/dvb-ttusb-budget.c
@@ -1657,6 +1657,9 @@ static void frontend_init(struct ttusb* ttusb)
 static struct i2c_algorithm ttusb_dec_algo = {
 	.master_xfer	= master_xfer,
 	.functionality	= functionality,
+#ifdef NEED_ALGO_CONTROL
+	.algo_control = dummy_algo_control,
+#endif
 };
 
 static int ttusb_probe(struct usb_interface *intf, const struct usb_device_id *id)
diff --git a/linux/drivers/media/video/au0828/au0828-i2c.c b/linux/drivers/media/video/au0828/au0828-i2c.c
index 03b797b9b..d8cef6ccc 100644
--- a/linux/drivers/media/video/au0828/au0828-i2c.c
+++ b/linux/drivers/media/video/au0828/au0828-i2c.c
@@ -301,6 +301,9 @@ static u32 au0828_functionality(struct i2c_adapter *adap)
 static struct i2c_algorithm au0828_i2c_algo_template = {
 	.master_xfer	= i2c_xfer,
 	.functionality	= au0828_functionality,
+#ifdef NEED_ALGO_CONTROL
+	.algo_control = dummy_algo_control,
+#endif
 };
 
 /* ----------------------------------------------------------------------- */
diff --git a/linux/drivers/media/video/bt8xx/bttv-i2c.c b/linux/drivers/media/video/bt8xx/bttv-i2c.c
index bcd2cd240..558572589 100644
--- a/linux/drivers/media/video/bt8xx/bttv-i2c.c
+++ b/linux/drivers/media/video/bt8xx/bttv-i2c.c
@@ -260,6 +260,9 @@ static int bttv_i2c_xfer(struct i2c_adapter *i2c_adap, struct i2c_msg *msgs, int
 static const struct i2c_algorithm bttv_algo = {
 	.master_xfer   = bttv_i2c_xfer,
 	.functionality = functionality,
+#ifdef NEED_ALGO_CONTROL
+	.algo_control = dummy_algo_control,
+#endif
 };
 
 /* ----------------------------------------------------------------------- */
diff --git a/linux/drivers/media/video/cx18/cx18-av-audio.c b/linux/drivers/media/video/cx18/cx18-av-audio.c
index 486cad0c2..fd85b9b2d 100644
--- a/linux/drivers/media/video/cx18/cx18-av-audio.c
+++ b/linux/drivers/media/video/cx18/cx18-av-audio.c
@@ -4,6 +4,7 @@
  *  Derived from cx25840-audio.c
  *
  *  Copyright (C) 2007  Hans Verkuil <hverkuil@xs4all.nl>
+ *  Copyright (C) 2008  Andy Walls <awalls@radix.net>
  *
  *  This program is free software; you can redistribute it and/or
  *  modify it under the terms of the GNU General Public License
diff --git a/linux/drivers/media/video/cx18/cx18-av-core.c b/linux/drivers/media/video/cx18/cx18-av-core.c
index 518bd701d..40ea6fde6 100644
--- a/linux/drivers/media/video/cx18/cx18-av-core.c
+++ b/linux/drivers/media/video/cx18/cx18-av-core.c
@@ -4,6 +4,7 @@
  *  Derived from cx25840-core.c
  *
  *  Copyright (C) 2007  Hans Verkuil <hverkuil@xs4all.nl>
+ *  Copyright (C) 2008  Andy Walls <awalls@radix.net>
  *
  *  This program is free software; you can redistribute it and/or
  *  modify it under the terms of the GNU General Public License
@@ -80,11 +81,6 @@ u32 cx18_av_read4(struct cx18 *cx, u16 addr)
 	return cx18_read_reg(cx, 0xc40000 + addr);
 }
 
-u32 cx18_av_read4_noretry(struct cx18 *cx, u16 addr)
-{
-	return cx18_read_reg_noretry(cx, 0xc40000 + addr);
-}
-
 int cx18_av_and_or(struct cx18 *cx, u16 addr, unsigned and_mask,
 		   u8 or_value)
 {
diff --git a/linux/drivers/media/video/cx18/cx18-av-core.h b/linux/drivers/media/video/cx18/cx18-av-core.h
index a07988c6f..cf68a6039 100644
--- a/linux/drivers/media/video/cx18/cx18-av-core.h
+++ b/linux/drivers/media/video/cx18/cx18-av-core.h
@@ -4,6 +4,7 @@
  *  Derived from cx25840-core.h
  *
  *  Copyright (C) 2007  Hans Verkuil <hverkuil@xs4all.nl>
+ *  Copyright (C) 2008  Andy Walls <awalls@radix.net>
  *
  *  This program is free software; you can redistribute it and/or
  *  modify it under the terms of the GNU General Public License
@@ -307,7 +308,6 @@ int cx18_av_write4_expect(struct cx18 *cx, u16 addr, u32 value, u32 eval,
 			  u32 mask);
 u8 cx18_av_read(struct cx18 *cx, u16 addr);
 u32 cx18_av_read4(struct cx18 *cx, u16 addr);
-u32 cx18_av_read4_noretry(struct cx18 *cx, u16 addr);
 int cx18_av_and_or(struct cx18 *cx, u16 addr, unsigned mask, u8 value);
 int cx18_av_and_or4(struct cx18 *cx, u16 addr, u32 mask, u32 value);
 int cx18_av_cmd(struct cx18 *cx, unsigned int cmd, void *arg);
diff --git a/linux/drivers/media/video/cx18/cx18-av-firmware.c b/linux/drivers/media/video/cx18/cx18-av-firmware.c
index 924691dca..c64fd0a05 100644
--- a/linux/drivers/media/video/cx18/cx18-av-firmware.c
+++ b/linux/drivers/media/video/cx18/cx18-av-firmware.c
@@ -2,6 +2,7 @@
  *  cx18 ADEC firmware functions
  *
  *  Copyright (C) 2007  Hans Verkuil <hverkuil@xs4all.nl>
+ *  Copyright (C) 2008  Andy Walls <awalls@radix.net>
  *
  *  This program is free software; you can redistribute it and/or
  *  modify it under the terms of the GNU General Public License
@@ -68,8 +69,7 @@ int cx18_av_loadfw(struct cx18 *cx)
 				cx18_av_write4_noretry(cx, CXADEC_DL_CTL,
 						       dl_control);
 				udelay(10);
-				value = cx18_av_read4_noretry(cx,
-							      CXADEC_DL_CTL);
+				value = cx18_av_read4(cx, CXADEC_DL_CTL);
 				if (value == dl_control)
 					break;
 				/* Check if we can correct the byte by changing
@@ -80,8 +80,6 @@ int cx18_av_loadfw(struct cx18 *cx)
 					break;
 				}
 			}
-			cx18_log_write_retries(cx, retries2,
-					cx->reg_mem + 0xc40000 + CXADEC_DL_CTL);
 			if (unrec_err || retries2 >= CX18_MAX_MMIO_WR_RETRIES)
 				break;
 		}
diff --git a/linux/drivers/media/video/cx18/cx18-cards.c b/linux/drivers/media/video/cx18/cx18-cards.c
index 7345fc09d..23bd871b7 100644
--- a/linux/drivers/media/video/cx18/cx18-cards.c
+++ b/linux/drivers/media/video/cx18/cx18-cards.c
@@ -4,6 +4,7 @@
  *  Derived from ivtv-cards.c
  *
  *  Copyright (C) 2007  Hans Verkuil <hverkuil@xs4all.nl>
+ *  Copyright (C) 2008  Andy Walls <awalls@radix.net>
  *
  *  This program is free software; you can redistribute it and/or modify
  *  it under the terms of the GNU General Public License as published by
diff --git a/linux/drivers/media/video/cx18/cx18-cards.h b/linux/drivers/media/video/cx18/cx18-cards.h
index 32155f6e6..a54aae9ed 100644
--- a/linux/drivers/media/video/cx18/cx18-cards.h
+++ b/linux/drivers/media/video/cx18/cx18-cards.h
@@ -4,6 +4,7 @@
  *  Derived from ivtv-cards.c
  *
  *  Copyright (C) 2007  Hans Verkuil <hverkuil@xs4all.nl>
+ *  Copyright (C) 2008  Andy Walls <awalls@radix.net>
  *
  *  This program is free software; you can redistribute it and/or modify
  *  it under the terms of the GNU General Public License as published by
diff --git a/linux/drivers/media/video/cx18/cx18-driver.c b/linux/drivers/media/video/cx18/cx18-driver.c
index 54f0fde42..57fcce84b 100644
--- a/linux/drivers/media/video/cx18/cx18-driver.c
+++ b/linux/drivers/media/video/cx18/cx18-driver.c
@@ -75,14 +75,9 @@ static int radio[CX18_MAX_CARDS] = { -1, -1, -1, -1, -1, -1, -1, -1,
 				     -1, -1, -1, -1, -1, -1, -1, -1,
 				     -1, -1, -1, -1, -1, -1, -1, -1,
 				     -1, -1, -1, -1, -1, -1, -1, -1 };
-static int mmio_ndelay[CX18_MAX_CARDS] = { -1, -1, -1, -1, -1, -1, -1, -1,
-					   -1, -1, -1, -1, -1, -1, -1, -1,
-					   -1, -1, -1, -1, -1, -1, -1, -1,
-					   -1, -1, -1, -1, -1, -1, -1, -1 };
 static unsigned cardtype_c = 1;
 static unsigned tuner_c = 1;
 static unsigned radio_c = 1;
-static unsigned mmio_ndelay_c = 1;
 static char pal[] = "--";
 static char secam[] = "--";
 static char ntsc[] = "-";
@@ -96,18 +91,20 @@ static int enc_pcm_buffers = CX18_DEFAULT_ENC_PCM_BUFFERS;
 
 static int cx18_pci_latency = 1;
 
-int cx18_retry_mmio = 1;
+static int mmio_ndelay;
+static int retry_mmio = 1;
+
 int cx18_debug;
 
 module_param_array(tuner, int, &tuner_c, 0644);
 module_param_array(radio, bool, &radio_c, 0644);
 module_param_array(cardtype, int, &cardtype_c, 0644);
-module_param_array(mmio_ndelay, int, &mmio_ndelay_c, 0644);
 module_param_string(pal, pal, sizeof(pal), 0644);
 module_param_string(secam, secam, sizeof(secam), 0644);
 module_param_string(ntsc, ntsc, sizeof(ntsc), 0644);
 module_param_named(debug, cx18_debug, int, 0644);
-module_param_named(retry_mmio, cx18_retry_mmio, int, 0644);
+module_param(mmio_ndelay, int, 0644);
+module_param(retry_mmio, int, 0644);
 module_param(cx18_pci_latency, int, 0644);
 module_param(cx18_first_minor, int, 0644);
 
@@ -152,13 +149,11 @@ MODULE_PARM_DESC(cx18_pci_latency,
 		 "Change the PCI latency to 64 if lower: 0 = No, 1 = Yes,\n"
 		 "\t\t\tDefault: Yes");
 MODULE_PARM_DESC(retry_mmio,
-		 "Check and retry memory mapped IO accesses\n"
-		 "\t\t\tDefault: 1 [Yes]");
+		 "(Deprecated) MMIO writes are now always checked and retried\n"
+		 "\t\t\tEffectively: 1 [Yes]");
 MODULE_PARM_DESC(mmio_ndelay,
-		 "Delay (ns) for each CX23418 memory mapped IO access.\n"
-		 "\t\t\tTry larger values that are close to a multiple of the\n"
-		 "\t\t\tPCI clock period, 30.3 ns, if your card doesn't work.\n"
-		 "\t\t\tDefault: " __stringify(CX18_DEFAULT_MMIO_NDELAY));
+		 "(Deprecated) MMIO accesses are now never purposely delayed\n"
+		 "\t\t\tEffectively: 0 ns");
 MODULE_PARM_DESC(enc_mpg_buffers,
 		 "Encoder MPG Buffers (in MB)\n"
 		 "\t\t\tDefault: " __stringify(CX18_DEFAULT_ENC_MPG_BUFFERS));
@@ -375,11 +370,6 @@ static void cx18_process_options(struct cx18 *cx)
 	cx->options.tuner = tuner[cx->num];
 	cx->options.radio = radio[cx->num];
 
-	if (mmio_ndelay[cx->num] < 0)
-		cx->options.mmio_ndelay = CX18_DEFAULT_MMIO_NDELAY;
-	else
-		cx->options.mmio_ndelay = mmio_ndelay[cx->num];
-
 	cx->std = cx18_parse_std(cx);
 	if (cx->options.cardtype == -1) {
 		CX18_INFO("Ignore card\n");
@@ -440,6 +430,8 @@ done:
  */
 static int __devinit cx18_init_struct1(struct cx18 *cx)
 {
+	int i;
+
 	cx->base_addr = pci_resource_start(cx->dev, 0);
 
 	mutex_init(&cx->serialize_lock);
@@ -451,11 +443,22 @@ static int __devinit cx18_init_struct1(struct cx18 *cx)
 
 	spin_lock_init(&cx->lock);
 
+	cx->work_queue = create_singlethread_workqueue(cx->name);
+	if (cx->work_queue == NULL) {
+		CX18_ERR("Unable to create work hander thread\n");
+		return -ENOMEM;
+	}
+
+	for (i = 0; i < CX18_MAX_EPU_WORK_ORDERS; i++) {
+		cx->epu_work_order[i].cx = cx;
+		cx->epu_work_order[i].str = cx->epu_debug_str;
 #if LINUX_VERSION_CODE >= KERNEL_VERSION(2, 6, 20)
-	INIT_WORK(&cx->work, cx18_work_handler);
+		INIT_WORK(&cx->epu_work_order[i].work, cx18_epu_work_handler);
 #else
-	INIT_WORK(&cx->work, cx18_work_handler, cx);
+		INIT_WORK(&cx->epu_work_order[i].work, cx18_epu_work_handler,
+			  &cx->epu_work_order[i].work);
 #endif
+	}
 
 	/* start counting open_id at 1 */
 	cx->open_id = 1;
@@ -660,12 +663,9 @@ static int __devinit cx18_probe(struct pci_dev *dev,
 
 	/* PCI Device Setup */
 	retval = cx18_setup_pci(cx, dev, pci_id);
-	if (retval != 0) {
-		if (retval == -EIO)
-			goto free_workqueue;
-		else if (retval == -ENXIO)
-			goto free_mem;
-	}
+	if (retval != 0)
+		goto free_workqueue;
+
 	/* save cx in the pci struct for later use */
 	pci_set_drvdata(dev, cx);
 
@@ -835,11 +835,11 @@ free_map:
 free_mem:
 	release_mem_region(cx->base_addr, CX18_MEM_SIZE);
 free_workqueue:
+	destroy_workqueue(cx->work_queue);
 err:
 	if (retval == 0)
 		retval = -ENODEV;
 	CX18_ERR("Error %d on initialization\n", retval);
-	cx18_log_statistics(cx);
 
 	i = cx->num;
 	spin_lock(&cx18_cards_lock);
@@ -918,6 +918,15 @@ int cx18_init_on_first_open(struct cx18 *cx)
 	return 0;
 }
 
+#if LINUX_VERSION_CODE >= KERNEL_VERSION(2, 6, 22)
+static void cx18_cancel_epu_work_orders(struct cx18 *cx)
+{
+	int i;
+	for (i = 0; i < CX18_MAX_EPU_WORK_ORDERS; i++)
+		cancel_work_sync(&cx->epu_work_order[i].work);
+}
+
+#endif
 static void cx18_remove(struct pci_dev *pci_dev)
 {
 	struct cx18 *cx = pci_get_drvdata(pci_dev);
@@ -931,11 +940,22 @@ static void cx18_remove(struct pci_dev *pci_dev)
 
 	/* Interrupts */
 	cx18_sw1_irq_disable(cx, IRQ_CPU_TO_EPU | IRQ_APU_TO_EPU);
+#if LINUX_VERSION_CODE >= KERNEL_VERSION(2, 6, 22)
+	cx18_sw2_irq_disable(cx, IRQ_CPU_TO_EPU_ACK | IRQ_APU_TO_EPU_ACK);
+
+	cx18_halt_firmware(cx);
+
+	cx18_cancel_epu_work_orders(cx);
+#else
+
+	flush_workqueue(cx->work_queue);
+
 	cx18_sw2_irq_disable(cx, IRQ_CPU_TO_EPU_ACK | IRQ_APU_TO_EPU_ACK);
 
 	cx18_halt_firmware(cx);
+#endif
 
-	flush_scheduled_work();
+	destroy_workqueue(cx->work_queue);
 
 	cx18_streams_cleanup(cx, 1);
 
@@ -949,7 +969,6 @@ static void cx18_remove(struct pci_dev *pci_dev)
 
 	pci_disable_device(cx->dev);
 
-	cx18_log_statistics(cx);
 	CX18_INFO("Removed %s, card #%d\n", cx->card_name, cx->num);
 }
 
@@ -998,6 +1017,7 @@ static void module_cleanup(void)
 			continue;
 		kfree(cx18_cards[i]);
 	}
+
 }
 
 module_init(module_start);
diff --git a/linux/drivers/media/video/cx18/cx18-driver.h b/linux/drivers/media/video/cx18/cx18-driver.h
index ce7680675..94c196a91 100644
--- a/linux/drivers/media/video/cx18/cx18-driver.h
+++ b/linux/drivers/media/video/cx18/cx18-driver.h
@@ -4,6 +4,7 @@
  *  Derived from ivtv-driver.h
  *
  *  Copyright (C) 2007  Hans Verkuil <hverkuil@xs4all.nl>
+ *  Copyright (C) 2008  Andy Walls <awalls@radix.net>
  *
  *  This program is free software; you can redistribute it and/or modify
  *  it under the terms of the GNU General Public License as published by
@@ -64,9 +65,6 @@
 #  error "This driver requires kernel PCI support."
 #endif
 
-/* Default delay to throttle mmio access to the CX23418 */
-#define CX18_DEFAULT_MMIO_NDELAY 0 /* 0 ns = 0 PCI clock(s) / 33 MHz */
-
 #define CX18_MEM_OFFSET	0x00000000
 #define CX18_MEM_SIZE	0x04000000
 #define CX18_REG_OFFSET	0x02000000
@@ -176,7 +174,6 @@
 
 #define CX18_MAX_PGM_INDEX (400)
 
-extern int cx18_retry_mmio;	/* enable check & retry of mmio accesses */
 extern int cx18_debug;
 
 
@@ -185,7 +182,6 @@ struct cx18_options {
 	int cardtype;		/* force card type on load */
 	int tuner;		/* set tuner on load */
 	int radio;		/* enable/disable radio */
-	unsigned long mmio_ndelay; /* delay in ns after every PCI mmio access */
 };
 
 /* per-buffer bit flags */
@@ -203,8 +199,6 @@ struct cx18_options {
 #define CX18_F_I_EOS			4 	/* End of encoder stream */
 #define CX18_F_I_RADIO_USER		5 	/* radio tuner is selected */
 #define CX18_F_I_ENC_PAUSED		13 	/* the encoder is paused */
-#define CX18_F_I_HAVE_WORK		15   	/* there is work to be done */
-#define CX18_F_I_WORK_HANDLER_DVB	18   	/* work to be done for DVB */
 #define CX18_F_I_INITED			21 	/* set after first open */
 #define CX18_F_I_FAILED			22 	/* set if first open failed */
 
@@ -219,6 +213,7 @@ struct cx18_buffer {
 	dma_addr_t dma_handle;
 	u32 id;
 	unsigned long b_flags;
+	unsigned skipped;
 	char *buf;
 
 	u32 bytesused;
@@ -247,6 +242,26 @@ struct cx18_dvb {
 struct cx18;	 /* forward reference */
 struct cx18_scb; /* forward reference */
 
+
+#define CX18_MAX_MDL_ACKS 2
+#define CX18_MAX_EPU_WORK_ORDERS 70 /* CPU_DE_RELEASE_MDL bursts 63 commands */
+
+#define CX18_F_EWO_MB_STALE_UPON_RECEIPT 0x1
+#define CX18_F_EWO_MB_STALE_WHILE_PROC   0x2
+#define CX18_F_EWO_MB_STALE \
+	     (CX18_F_EWO_MB_STALE_UPON_RECEIPT | CX18_F_EWO_MB_STALE_WHILE_PROC)
+
+struct cx18_epu_work_order {
+	struct work_struct work;
+	atomic_t pending;
+	struct cx18 *cx;
+	unsigned long flags;
+	int rpu;
+	struct cx18_mailbox mb;
+	struct cx18_mdl_ack mdl_ack[CX18_MAX_MDL_ACKS];
+	char *str;
+};
+
 #define CX18_INVALID_TASK_HANDLE 0xffffffff
 
 struct cx18_stream {
@@ -260,7 +275,7 @@ struct cx18_stream {
 	unsigned mdl_offset;
 
 	u32 id;
-	spinlock_t qlock; 	/* locks access to the queues */
+	struct mutex qlock; 	/* locks access to the queues */
 	unsigned long s_flags;	/* status flags, see above */
 	int dma;		/* can be PCI_DMA_TODEVICE,
 				   PCI_DMA_FROMDEVICE or
@@ -353,18 +368,6 @@ struct cx18_i2c_algo_callback_data {
 };
 
 #define CX18_MAX_MMIO_WR_RETRIES 10
-#define CX18_MAX_MMIO_RD_RETRIES  2
-
-struct cx18_mmio_stats {
-	atomic_t retried_write[CX18_MAX_MMIO_WR_RETRIES+1];
-	atomic_t retried_read[CX18_MAX_MMIO_RD_RETRIES+1];
-};
-
-#define CX18_MAX_MB_ACK_DELAY 100
-
-struct cx18_mbox_stats {
-	atomic_t mb_ack_delay[CX18_MAX_MB_ACK_DELAY+1];
-};
 
 /* Struct to hold info about cx18 cards */
 struct cx18 {
@@ -388,7 +391,6 @@ struct cx18 {
 	struct mutex epu2apu_mb_lock; /* protect driver to chip mailbox in SCB*/
 	struct mutex epu2cpu_mb_lock; /* protect driver to chip mailbox in SCB*/
 
-
 	struct cx18_av_state av_state;
 
 	/* codec settings */
@@ -441,7 +443,13 @@ struct cx18 {
 	/* when the current DMA is finished this queue is woken up */
 	wait_queue_head_t dma_waitq;
 
-	struct work_struct work;
+	u32 sw1_irq_mask;
+	u32 sw2_irq_mask;
+	u32 hw2_irq_mask;
+
+	struct workqueue_struct *work_queue;
+	struct cx18_epu_work_order epu_work_order[CX18_MAX_EPU_WORK_ORDERS];
+	char epu_debug_str[256]; /* CX18_EPU_DEBUG is rare: use shared space */
 
 	/* i2c */
 	struct i2c_adapter i2c_adap[2];
@@ -456,10 +464,6 @@ struct cx18 {
 	u32 gpio_val;
 	struct mutex gpio_lock;
 
-	/* Statistics */
-	struct cx18_mmio_stats mmio_stats;
-	struct cx18_mbox_stats mbox_stats;
-
 	/* v4l2 and User settings */
 
 	/* codec settings */
diff --git a/linux/drivers/media/video/cx18/cx18-dvb.c b/linux/drivers/media/video/cx18/cx18-dvb.c
index 4845f732e..034e09a37 100644
--- a/linux/drivers/media/video/cx18/cx18-dvb.c
+++ b/linux/drivers/media/video/cx18/cx18-dvb.c
@@ -2,6 +2,7 @@
  *  cx18 functions for DVB support
  *
  *  Copyright (c) 2008 Steven Toth <stoth@linuxtv.org>
+ *  Copyright (C) 2008  Andy Walls <awalls@radix.net>
  *
  *  This program is free software; you can redistribute it and/or modify
  *  it under the terms of the GNU General Public License as published by
@@ -23,8 +24,6 @@
 #include "cx18-dvb.h"
 #include "cx18-io.h"
 #include "cx18-streams.h"
-#include "cx18-queue.h"
-#include "cx18-scb.h"
 #include "cx18-cards.h"
 #include "s5h1409.h"
 #include "mxl5005s.h"
@@ -305,26 +304,3 @@ static int dvb_register(struct cx18_stream *stream)
 
 	return ret;
 }
-
-void cx18_dvb_work_handler(struct cx18 *cx)
-{
-	struct cx18_buffer *buf;
-	struct cx18_stream *s = &cx->streams[CX18_ENC_STREAM_TYPE_TS];
-
-	while ((buf = cx18_dequeue(s, &s->q_full)) != NULL) {
-		if (s->dvb.enabled)
-			dvb_dmx_swfilter(&s->dvb.demux, buf->buf,
-					 buf->bytesused);
-
-		cx18_buf_sync_for_device(s, buf);
-		cx18_enqueue(s, buf, &s->q_free);
-
-		if (s->handle == CX18_INVALID_TASK_HANDLE ||
-		    !test_bit(CX18_F_S_STREAMING, &s->s_flags))
-			continue;
-
-		cx18_vapi(cx, CX18_CPU_DE_SET_MDL, 5, s->handle,
-		       (void __iomem *)&cx->scb->cpu_mdl[buf->id] - cx->enc_mem,
-		       1, buf->id, s->buf_size);
-	}
-}
diff --git a/linux/drivers/media/video/cx18/cx18-dvb.h b/linux/drivers/media/video/cx18/cx18-dvb.h
index bbdcefc87..bf8d8f6f5 100644
--- a/linux/drivers/media/video/cx18/cx18-dvb.h
+++ b/linux/drivers/media/video/cx18/cx18-dvb.h
@@ -23,4 +23,3 @@
 
 int cx18_dvb_register(struct cx18_stream *stream);
 void cx18_dvb_unregister(struct cx18_stream *stream);
-void cx18_dvb_work_handler(struct cx18 *cx);
diff --git a/linux/drivers/media/video/cx18/cx18-fileops.c b/linux/drivers/media/video/cx18/cx18-fileops.c
index e884271b8..45b5f402e 100644
--- a/linux/drivers/media/video/cx18/cx18-fileops.c
+++ b/linux/drivers/media/video/cx18/cx18-fileops.c
@@ -4,6 +4,7 @@
  *  Derived from ivtv-fileops.c
  *
  *  Copyright (C) 2007  Hans Verkuil <hverkuil@xs4all.nl>
+ *  Copyright (C) 2008  Andy Walls <awalls@radix.net>
  *
  *  This program is free software; you can redistribute it and/or modify
  *  it under the terms of the GNU General Public License as published by
diff --git a/linux/drivers/media/video/cx18/cx18-firmware.c b/linux/drivers/media/video/cx18/cx18-firmware.c
index d9c5f55ab..8eac84314 100644
--- a/linux/drivers/media/video/cx18/cx18-firmware.c
+++ b/linux/drivers/media/video/cx18/cx18-firmware.c
@@ -2,6 +2,7 @@
  *  cx18 firmware functions
  *
  *  Copyright (C) 2007  Hans Verkuil <hverkuil@xs4all.nl>
+ *  Copyright (C) 2008  Andy Walls <awalls@radix.net>
  *
  *  This program is free software; you can redistribute it and/or modify
  *  it under the terms of the GNU General Public License as published by
@@ -121,6 +122,7 @@ static int load_cpu_fw_direct(const char *fn, u8 __iomem *mem, struct cx18 *cx)
 			if (cx18_raw_readl(cx, dst) != *src) {
 				CX18_ERR("Mismatch at offset %x\n", i);
 				release_firmware(fw);
+				cx18_setup_page(cx, 0);
 				return -EIO;
 			}
 			dst++;
@@ -131,6 +133,7 @@ static int load_cpu_fw_direct(const char *fn, u8 __iomem *mem, struct cx18 *cx)
 		CX18_INFO("loaded %s firmware (%zd bytes)\n", fn, fw->size);
 	size = fw->size;
 	release_firmware(fw);
+	cx18_setup_page(cx, SCB_OFFSET);
 	return size;
 }
 
@@ -150,6 +153,7 @@ static int load_apu_fw_direct(const char *fn, u8 __iomem *dst, struct cx18 *cx,
 	if (request_firmware(&fw, fn, &cx->dev->dev)) {
 		CX18_ERR("unable to open firmware %s\n", fn);
 		CX18_ERR("did you put the firmware in the hotplug firmware directory?\n");
+		cx18_setup_page(cx, 0);
 		return -ENOMEM;
 	}
 
@@ -185,6 +189,7 @@ static int load_apu_fw_direct(const char *fn, u8 __iomem *dst, struct cx18 *cx,
 					CX18_ERR("Mismatch at offset %x\n",
 						 offset + j);
 					release_firmware(fw);
+					cx18_setup_page(cx, 0);
 					return -EIO;
 				}
 			}
@@ -196,6 +201,7 @@ static int load_apu_fw_direct(const char *fn, u8 __iomem *dst, struct cx18 *cx,
 				fn, apu_version, fw->size);
 	size = fw->size;
 	release_firmware(fw);
+	cx18_setup_page(cx, 0);
 	return size;
 }
 
diff --git a/linux/drivers/media/video/cx18/cx18-gpio.c b/linux/drivers/media/video/cx18/cx18-gpio.c
index 17b7a32fc..1a99329f3 100644
--- a/linux/drivers/media/video/cx18/cx18-gpio.c
+++ b/linux/drivers/media/video/cx18/cx18-gpio.c
@@ -4,6 +4,7 @@
  *  Derived from ivtv-gpio.c
  *
  *  Copyright (C) 2007  Hans Verkuil <hverkuil@xs4all.nl>
+ *  Copyright (C) 2008  Andy Walls <awalls@radix.net>
  *
  *  This program is free software; you can redistribute it and/or modify
  *  it under the terms of the GNU General Public License as published by
@@ -60,8 +61,6 @@ static void gpio_write(struct cx18 *cx)
 					CX18_REG_GPIO_DIR2, ~dir_hi, dir_hi);
 	cx18_write_reg_expect(cx, (dir_hi << 16) | val_hi,
 					CX18_REG_GPIO_OUT2, val_hi, dir_hi);
-	if (!cx18_retry_mmio)
-		(void) cx18_read_reg(cx, CX18_REG_GPIO_OUT2); /* sync */
 }
 
 void cx18_reset_i2c_slaves_gpio(struct cx18 *cx)
diff --git a/linux/drivers/media/video/cx18/cx18-gpio.h b/linux/drivers/media/video/cx18/cx18-gpio.h
index beb7424b9..39ffccc19 100644
--- a/linux/drivers/media/video/cx18/cx18-gpio.h
+++ b/linux/drivers/media/video/cx18/cx18-gpio.h
@@ -4,6 +4,7 @@
  *  Derived from ivtv-gpio.h
  *
  *  Copyright (C) 2007  Hans Verkuil <hverkuil@xs4all.nl>
+ *  Copyright (C) 2008  Andy Walls <awalls@radix.net>
  *
  *  This program is free software; you can redistribute it and/or modify
  *  it under the terms of the GNU General Public License as published by
diff --git a/linux/drivers/media/video/cx18/cx18-i2c.c b/linux/drivers/media/video/cx18/cx18-i2c.c
index 1af9ea149..c0a79ecd4 100644
--- a/linux/drivers/media/video/cx18/cx18-i2c.c
+++ b/linux/drivers/media/video/cx18/cx18-i2c.c
@@ -4,6 +4,7 @@
  *  Derived from ivtv-i2c.c
  *
  *  Copyright (C) 2007  Hans Verkuil <hverkuil@xs4all.nl>
+ *  Copyright (C) 2008  Andy Walls <awalls@radix.net>
  *
  *  This program is free software; you can redistribute it and/or modify
  *  it under the terms of the GNU General Public License as published by
@@ -184,9 +185,9 @@ static void cx18_setscl(void *data, int state)
 	u32 r = cx18_read_reg(cx, addr);
 
 	if (state)
-		cx18_write_reg_sync(cx, r | SETSCL_BIT, addr);
+		cx18_write_reg(cx, r | SETSCL_BIT, addr);
 	else
-		cx18_write_reg_sync(cx, r & ~SETSCL_BIT, addr);
+		cx18_write_reg(cx, r & ~SETSCL_BIT, addr);
 }
 
 static void cx18_setsda(void *data, int state)
@@ -197,9 +198,9 @@ static void cx18_setsda(void *data, int state)
 	u32 r = cx18_read_reg(cx, addr);
 
 	if (state)
-		cx18_write_reg_sync(cx, r | SETSDL_BIT, addr);
+		cx18_write_reg(cx, r | SETSDL_BIT, addr);
 	else
-		cx18_write_reg_sync(cx, r & ~SETSDL_BIT, addr);
+		cx18_write_reg(cx, r & ~SETSDL_BIT, addr);
 }
 
 static int cx18_getscl(void *data)
@@ -433,16 +434,10 @@ int init_cx18_i2c(struct cx18 *cx)
 	}
 	/* courtesy of Steven Toth <stoth@hauppauge.com> */
 	cx18_write_reg_expect(cx, 0x00c00000, 0xc7001c, 0x00000000, 0x00c000c0);
-	if (!cx18_retry_mmio)
-		(void) cx18_read_reg(cx, 0xc7001c); /* sync */
 	mdelay(10);
 	cx18_write_reg_expect(cx, 0x00c000c0, 0xc7001c, 0x000000c0, 0x00c000c0);
-	if (!cx18_retry_mmio)
-		(void) cx18_read_reg(cx, 0xc7001c); /* sync */
 	mdelay(10);
 	cx18_write_reg_expect(cx, 0x00c00000, 0xc7001c, 0x00000000, 0x00c000c0);
-	if (!cx18_retry_mmio)
-		(void) cx18_read_reg(cx, 0xc7001c); /* sync */
 	mdelay(10);
 
 	/* Set to edge-triggered intrs. */
@@ -452,12 +447,12 @@ int init_cx18_i2c(struct cx18 *cx)
 		       ~(HW2_I2C1_INT|HW2_I2C2_INT), HW2_I2C1_INT|HW2_I2C2_INT);
 
 	/* Hw I2C1 Clock Freq ~100kHz */
-	cx18_write_reg_sync(cx, 0x00021c0f & ~4, CX18_REG_I2C_1_WR);
+	cx18_write_reg(cx, 0x00021c0f & ~4, CX18_REG_I2C_1_WR);
 	cx18_setscl(&cx->i2c_algo_cb_data[0], 1);
 	cx18_setsda(&cx->i2c_algo_cb_data[0], 1);
 
 	/* Hw I2C2 Clock Freq ~100kHz */
-	cx18_write_reg_sync(cx, 0x00021c0f & ~4, CX18_REG_I2C_2_WR);
+	cx18_write_reg(cx, 0x00021c0f & ~4, CX18_REG_I2C_2_WR);
 	cx18_setscl(&cx->i2c_algo_cb_data[1], 1);
 	cx18_setsda(&cx->i2c_algo_cb_data[1], 1);
 
diff --git a/linux/drivers/media/video/cx18/cx18-io.c b/linux/drivers/media/video/cx18/cx18-io.c
index 3c6485fce..ec5b3d7bc 100644
--- a/linux/drivers/media/video/cx18/cx18-io.c
+++ b/linux/drivers/media/video/cx18/cx18-io.c
@@ -24,183 +24,6 @@
 #include "cx18-io.h"
 #include "cx18-irq.h"
 
-void cx18_log_statistics(struct cx18 *cx)
-{
-	int i;
-
-	if (!(cx18_debug & CX18_DBGFLG_INFO))
-		return;
-
-	for (i = 0; i <= CX18_MAX_MMIO_WR_RETRIES; i++)
-		CX18_DEBUG_INFO("retried_write[%d] = %d\n", i,
-				atomic_read(&cx->mmio_stats.retried_write[i]));
-	for (i = 0; i <= CX18_MAX_MMIO_RD_RETRIES; i++)
-		CX18_DEBUG_INFO("retried_read[%d] = %d\n", i,
-				atomic_read(&cx->mmio_stats.retried_read[i]));
-	for (i = 0; i <= CX18_MAX_MB_ACK_DELAY; i++)
-		if (atomic_read(&cx->mbox_stats.mb_ack_delay[i]))
-			CX18_DEBUG_INFO("mb_ack_delay[%d] = %d\n", i,
-				  atomic_read(&cx->mbox_stats.mb_ack_delay[i]));
-	return;
-}
-
-void cx18_raw_writel_retry(struct cx18 *cx, u32 val, void __iomem *addr)
-{
-	int i;
-	for (i = 0; i < CX18_MAX_MMIO_WR_RETRIES; i++) {
-		cx18_raw_writel_noretry(cx, val, addr);
-		if (val == cx18_raw_readl_noretry(cx, addr))
-			break;
-	}
-	cx18_log_write_retries(cx, i, addr);
-}
-
-u32 cx18_raw_readl_retry(struct cx18 *cx, const void __iomem *addr)
-{
-	int i;
-	u32 val;
-	for (i = 0; i < CX18_MAX_MMIO_RD_RETRIES; i++) {
-		val = cx18_raw_readl_noretry(cx, addr);
-		if (val != 0xffffffff) /* PCI bus read error */
-			break;
-	}
-	cx18_log_read_retries(cx, i, addr);
-	return val;
-}
-
-u16 cx18_raw_readw_retry(struct cx18 *cx, const void __iomem *addr)
-{
-	int i;
-	u16 val;
-	for (i = 0; i < CX18_MAX_MMIO_RD_RETRIES; i++) {
-		val = cx18_raw_readw_noretry(cx, addr);
-		if (val != 0xffff) /* PCI bus read error */
-			break;
-	}
-	cx18_log_read_retries(cx, i, addr);
-	return val;
-}
-
-void cx18_writel_retry(struct cx18 *cx, u32 val, void __iomem *addr)
-{
-	int i;
-	for (i = 0; i < CX18_MAX_MMIO_WR_RETRIES; i++) {
-		cx18_writel_noretry(cx, val, addr);
-		if (val == cx18_readl_noretry(cx, addr))
-			break;
-	}
-	cx18_log_write_retries(cx, i, addr);
-}
-
-void _cx18_writel_expect(struct cx18 *cx, u32 val, void __iomem *addr,
-			 u32 eval, u32 mask)
-{
-	int i;
-	eval &= mask;
-	for (i = 0; i < CX18_MAX_MMIO_WR_RETRIES; i++) {
-		cx18_writel_noretry(cx, val, addr);
-		if (eval == (cx18_readl_noretry(cx, addr) & mask))
-			break;
-	}
-	cx18_log_write_retries(cx, i, addr);
-}
-
-void cx18_writew_retry(struct cx18 *cx, u16 val, void __iomem *addr)
-{
-	int i;
-	for (i = 0; i < CX18_MAX_MMIO_WR_RETRIES; i++) {
-		cx18_writew_noretry(cx, val, addr);
-		if (val == cx18_readw_noretry(cx, addr))
-			break;
-	}
-	cx18_log_write_retries(cx, i, addr);
-}
-
-void cx18_writeb_retry(struct cx18 *cx, u8 val, void __iomem *addr)
-{
-	int i;
-	for (i = 0; i < CX18_MAX_MMIO_WR_RETRIES; i++) {
-		cx18_writeb_noretry(cx, val, addr);
-		if (val == cx18_readb_noretry(cx, addr))
-			break;
-	}
-	cx18_log_write_retries(cx, i, addr);
-}
-
-u32 cx18_readl_retry(struct cx18 *cx, const void __iomem *addr)
-{
-	int i;
-	u32 val;
-	for (i = 0; i < CX18_MAX_MMIO_RD_RETRIES; i++) {
-		val = cx18_readl_noretry(cx, addr);
-		if (val != 0xffffffff) /* PCI bus read error */
-			break;
-	}
-	cx18_log_read_retries(cx, i, addr);
-	return val;
-}
-
-u16 cx18_readw_retry(struct cx18 *cx, const void __iomem *addr)
-{
-	int i;
-	u16 val;
-	for (i = 0; i < CX18_MAX_MMIO_RD_RETRIES; i++) {
-		val = cx18_readw_noretry(cx, addr);
-		if (val != 0xffff) /* PCI bus read error */
-			break;
-	}
-	cx18_log_read_retries(cx, i, addr);
-	return val;
-}
-
-u8 cx18_readb_retry(struct cx18 *cx, const void __iomem *addr)
-{
-	int i;
-	u8 val;
-	for (i = 0; i < CX18_MAX_MMIO_RD_RETRIES; i++) {
-		val = cx18_readb_noretry(cx, addr);
-		if (val != 0xff) /* PCI bus read error */
-			break;
-	}
-	cx18_log_read_retries(cx, i, addr);
-	return val;
-}
-
-void cx18_memcpy_fromio(struct cx18 *cx, void *to,
-			const void __iomem *from, unsigned int len)
-{
-	const u8 __iomem *src = from;
-	u8 *dst = to;
-
-	/* Align reads on the CX23418's addresses */
-	if ((len > 0) && ((unsigned long) src & 1)) {
-		*dst = cx18_readb(cx, src);
-		len--;
-		dst++;
-		src++;
-	}
-	if ((len > 1) && ((unsigned long) src & 2)) {
-		*((u16 *)dst) = cx18_raw_readw(cx, src);
-		len -= 2;
-		dst += 2;
-		src += 2;
-	}
-	while (len > 3) {
-		*((u32 *)dst) = cx18_raw_readl(cx, src);
-		len -= 4;
-		dst += 4;
-		src += 4;
-	}
-	if (len > 1) {
-		*((u16 *)dst) = cx18_raw_readw(cx, src);
-		len -= 2;
-		dst += 2;
-		src += 2;
-	}
-	if (len > 0)
-		*dst = cx18_readb(cx, src);
-}
-
 void cx18_memset_io(struct cx18 *cx, void __iomem *addr, int val, size_t count)
 {
 	u8 __iomem *dst = addr;
@@ -234,32 +57,28 @@ void cx18_memset_io(struct cx18 *cx, void __iomem *addr, int val, size_t count)
 
 void cx18_sw1_irq_enable(struct cx18 *cx, u32 val)
 {
-	u32 r;
 	cx18_write_reg_expect(cx, val, SW1_INT_STATUS, ~val, val);
-	r = cx18_read_reg(cx, SW1_INT_ENABLE_PCI);
-	cx18_write_reg(cx, r | val, SW1_INT_ENABLE_PCI);
+	cx->sw1_irq_mask = cx18_read_reg(cx, SW1_INT_ENABLE_PCI) | val;
+	cx18_write_reg(cx, cx->sw1_irq_mask, SW1_INT_ENABLE_PCI);
 }
 
 void cx18_sw1_irq_disable(struct cx18 *cx, u32 val)
 {
-	u32 r;
-	r = cx18_read_reg(cx, SW1_INT_ENABLE_PCI);
-	cx18_write_reg(cx, r & ~val, SW1_INT_ENABLE_PCI);
+	cx->sw1_irq_mask = cx18_read_reg(cx, SW1_INT_ENABLE_PCI) & ~val;
+	cx18_write_reg(cx, cx->sw1_irq_mask, SW1_INT_ENABLE_PCI);
 }
 
 void cx18_sw2_irq_enable(struct cx18 *cx, u32 val)
 {
-	u32 r;
 	cx18_write_reg_expect(cx, val, SW2_INT_STATUS, ~val, val);
-	r = cx18_read_reg(cx, SW2_INT_ENABLE_PCI);
-	cx18_write_reg(cx, r | val, SW2_INT_ENABLE_PCI);
+	cx->sw2_irq_mask = cx18_read_reg(cx, SW2_INT_ENABLE_PCI) | val;
+	cx18_write_reg(cx, cx->sw2_irq_mask, SW2_INT_ENABLE_PCI);
 }
 
 void cx18_sw2_irq_disable(struct cx18 *cx, u32 val)
 {
-	u32 r;
-	r = cx18_read_reg(cx, SW2_INT_ENABLE_PCI);
-	cx18_write_reg(cx, r & ~val, SW2_INT_ENABLE_PCI);
+	cx->sw2_irq_mask = cx18_read_reg(cx, SW2_INT_ENABLE_PCI) & ~val;
+	cx18_write_reg(cx, cx->sw2_irq_mask, SW2_INT_ENABLE_PCI);
 }
 
 void cx18_sw2_irq_disable_cpu(struct cx18 *cx, u32 val)
diff --git a/linux/drivers/media/video/cx18/cx18-io.h b/linux/drivers/media/video/cx18/cx18-io.h
index 4486b73fa..2635b3a8c 100644
--- a/linux/drivers/media/video/cx18/cx18-io.h
+++ b/linux/drivers/media/video/cx18/cx18-io.h
@@ -25,232 +25,125 @@
 
 #include "cx18-driver.h"
 
-static inline void cx18_io_delay(struct cx18 *cx)
-{
-	if (cx->options.mmio_ndelay)
-		ndelay(cx->options.mmio_ndelay);
-}
-
 /*
  * Readback and retry of MMIO access for reliability:
  * The concept was suggested by Steve Toth <stoth@linuxtv.org>.
  * The implmentation is the fault of Andy Walls <awalls@radix.net>.
+ *
+ * *write* functions are implied to retry the mmio unless suffixed with _noretry
+ * *read* functions never retry the mmio (it never helps to do so)
  */
 
-/* Statistics gathering */
-static inline
-void cx18_log_write_retries(struct cx18 *cx, int i, const void __iomem *addr)
-{
-	if (i > CX18_MAX_MMIO_WR_RETRIES)
-		i = CX18_MAX_MMIO_WR_RETRIES;
-	atomic_inc(&cx->mmio_stats.retried_write[i]);
-	return;
-}
-
-static inline
-void cx18_log_read_retries(struct cx18 *cx, int i, const void __iomem *addr)
+/* Non byteswapping memory mapped IO */
+static inline u32 cx18_raw_readl(struct cx18 *cx, const void __iomem *addr)
 {
-	if (i > CX18_MAX_MMIO_RD_RETRIES)
-		i = CX18_MAX_MMIO_RD_RETRIES;
-	atomic_inc(&cx->mmio_stats.retried_read[i]);
-	return;
+	return __raw_readl(addr);
 }
 
-void cx18_log_statistics(struct cx18 *cx);
-
-/* Non byteswapping memory mapped IO */
 static inline
 void cx18_raw_writel_noretry(struct cx18 *cx, u32 val, void __iomem *addr)
 {
 	__raw_writel(val, addr);
-	cx18_io_delay(cx);
 }
 
-void cx18_raw_writel_retry(struct cx18 *cx, u32 val, void __iomem *addr);
-
 static inline void cx18_raw_writel(struct cx18 *cx, u32 val, void __iomem *addr)
 {
-	if (cx18_retry_mmio)
-		cx18_raw_writel_retry(cx, val, addr);
-	else
+	int i;
+	for (i = 0; i < CX18_MAX_MMIO_WR_RETRIES; i++) {
 		cx18_raw_writel_noretry(cx, val, addr);
+		if (val == cx18_raw_readl(cx, addr))
+			break;
+	}
 }
 
-
-static inline
-u32 cx18_raw_readl_noretry(struct cx18 *cx, const void __iomem *addr)
-{
-	u32 ret = __raw_readl(addr);
-	cx18_io_delay(cx);
-	return ret;
-}
-
-u32 cx18_raw_readl_retry(struct cx18 *cx, const void __iomem *addr);
-
-static inline u32 cx18_raw_readl(struct cx18 *cx, const void __iomem *addr)
+/* Normal memory mapped IO */
+static inline u32 cx18_readl(struct cx18 *cx, const void __iomem *addr)
 {
-	if (cx18_retry_mmio)
-		return cx18_raw_readl_retry(cx, addr);
-
-	return cx18_raw_readl_noretry(cx, addr);
+	return readl(addr);
 }
 
-
 static inline
-u16 cx18_raw_readw_noretry(struct cx18 *cx, const void __iomem *addr)
+void cx18_writel_noretry(struct cx18 *cx, u32 val, void __iomem *addr)
 {
-	u16 ret = __raw_readw(addr);
-	cx18_io_delay(cx);
-	return ret;
+	writel(val, addr);
 }
 
-u16 cx18_raw_readw_retry(struct cx18 *cx, const void __iomem *addr);
-
-static inline u16 cx18_raw_readw(struct cx18 *cx, const void __iomem *addr)
+static inline void cx18_writel(struct cx18 *cx, u32 val, void __iomem *addr)
 {
-	if (cx18_retry_mmio)
-		return cx18_raw_readw_retry(cx, addr);
-
-	return cx18_raw_readw_noretry(cx, addr);
+	int i;
+	for (i = 0; i < CX18_MAX_MMIO_WR_RETRIES; i++) {
+		cx18_writel_noretry(cx, val, addr);
+		if (val == cx18_readl(cx, addr))
+			break;
+	}
 }
 
-
-/* Normal memory mapped IO */
 static inline
-void cx18_writel_noretry(struct cx18 *cx, u32 val, void __iomem *addr)
+void cx18_writel_expect(struct cx18 *cx, u32 val, void __iomem *addr,
+			u32 eval, u32 mask)
 {
-	writel(val, addr);
-	cx18_io_delay(cx);
+	int i;
+	u32 r;
+	eval &= mask;
+	for (i = 0; i < CX18_MAX_MMIO_WR_RETRIES; i++) {
+		cx18_writel_noretry(cx, val, addr);
+		r = cx18_readl(cx, addr);
+		if (r == 0xffffffff && eval != 0xffffffff)
+			continue;
+		if (eval == (r & mask))
+			break;
+	}
 }
 
-void cx18_writel_retry(struct cx18 *cx, u32 val, void __iomem *addr);
-
-static inline void cx18_writel(struct cx18 *cx, u32 val, void __iomem *addr)
+static inline u16 cx18_readw(struct cx18 *cx, const void __iomem *addr)
 {
-	if (cx18_retry_mmio)
-		cx18_writel_retry(cx, val, addr);
-	else
-		cx18_writel_noretry(cx, val, addr);
+	return readw(addr);
 }
 
-void _cx18_writel_expect(struct cx18 *cx, u32 val, void __iomem *addr,
-			 u32 eval, u32 mask);
-
 static inline
 void cx18_writew_noretry(struct cx18 *cx, u16 val, void __iomem *addr)
 {
 	writew(val, addr);
-	cx18_io_delay(cx);
 }
 
-void cx18_writew_retry(struct cx18 *cx, u16 val, void __iomem *addr);
-
 static inline void cx18_writew(struct cx18 *cx, u16 val, void __iomem *addr)
 {
-	if (cx18_retry_mmio)
-		cx18_writew_retry(cx, val, addr);
-	else
+	int i;
+	for (i = 0; i < CX18_MAX_MMIO_WR_RETRIES; i++) {
 		cx18_writew_noretry(cx, val, addr);
+		if (val == cx18_readw(cx, addr))
+			break;
+	}
 }
 
+static inline u8 cx18_readb(struct cx18 *cx, const void __iomem *addr)
+{
+	return readb(addr);
+}
 
 static inline
 void cx18_writeb_noretry(struct cx18 *cx, u8 val, void __iomem *addr)
 {
 	writeb(val, addr);
-	cx18_io_delay(cx);
 }
 
-void cx18_writeb_retry(struct cx18 *cx, u8 val, void __iomem *addr);
-
 static inline void cx18_writeb(struct cx18 *cx, u8 val, void __iomem *addr)
 {
-	if (cx18_retry_mmio)
-		cx18_writeb_retry(cx, val, addr);
-	else
+	int i;
+	for (i = 0; i < CX18_MAX_MMIO_WR_RETRIES; i++) {
 		cx18_writeb_noretry(cx, val, addr);
-}
-
-
-static inline u32 cx18_readl_noretry(struct cx18 *cx, const void __iomem *addr)
-{
-	u32 ret = readl(addr);
-	cx18_io_delay(cx);
-	return ret;
-}
-
-u32 cx18_readl_retry(struct cx18 *cx, const void __iomem *addr);
-
-static inline u32 cx18_readl(struct cx18 *cx, const void __iomem *addr)
-{
-	if (cx18_retry_mmio)
-		return cx18_readl_retry(cx, addr);
-
-	return cx18_readl_noretry(cx, addr);
-}
-
-
-static inline u16 cx18_readw_noretry(struct cx18 *cx, const void __iomem *addr)
-{
-	u16 ret = readw(addr);
-	cx18_io_delay(cx);
-	return ret;
-}
-
-u16 cx18_readw_retry(struct cx18 *cx, const void __iomem *addr);
-
-static inline u16 cx18_readw(struct cx18 *cx, const void __iomem *addr)
-{
-	if (cx18_retry_mmio)
-		return cx18_readw_retry(cx, addr);
-
-	return cx18_readw_noretry(cx, addr);
-}
-
-
-static inline u8 cx18_readb_noretry(struct cx18 *cx, const void __iomem *addr)
-{
-	u8 ret = readb(addr);
-	cx18_io_delay(cx);
-	return ret;
-}
-
-u8 cx18_readb_retry(struct cx18 *cx, const void __iomem *addr);
-
-static inline u8 cx18_readb(struct cx18 *cx, const void __iomem *addr)
-{
-	if (cx18_retry_mmio)
-		return cx18_readb_retry(cx, addr);
-
-	return cx18_readb_noretry(cx, addr);
-}
-
-
-static inline
-u32 cx18_write_sync_noretry(struct cx18 *cx, u32 val, void __iomem *addr)
-{
-	cx18_writel_noretry(cx, val, addr);
-	return cx18_readl_noretry(cx, addr);
+		if (val == cx18_readb(cx, addr))
+			break;
+	}
 }
 
 static inline
-u32 cx18_write_sync_retry(struct cx18 *cx, u32 val, void __iomem *addr)
-{
-	cx18_writel_retry(cx, val, addr);
-	return cx18_readl_retry(cx, addr);
-}
-
-static inline u32 cx18_write_sync(struct cx18 *cx, u32 val, void __iomem *addr)
+void cx18_memcpy_fromio(struct cx18 *cx, void *to,
+			const void __iomem *from, unsigned int len)
 {
-	if (cx18_retry_mmio)
-		return cx18_write_sync_retry(cx, val, addr);
-
-	return cx18_write_sync_noretry(cx, val, addr);
+	memcpy_fromio(to, from, len);
 }
 
-
-void cx18_memcpy_fromio(struct cx18 *cx, void *to,
-			const void __iomem *from, unsigned int len);
 void cx18_memset_io(struct cx18 *cx, void __iomem *addr, int val, size_t count);
 
 
@@ -260,130 +153,32 @@ static inline void cx18_write_reg_noretry(struct cx18 *cx, u32 val, u32 reg)
 	cx18_writel_noretry(cx, val, cx->reg_mem + reg);
 }
 
-static inline void cx18_write_reg_retry(struct cx18 *cx, u32 val, u32 reg)
-{
-	cx18_writel_retry(cx, val, cx->reg_mem + reg);
-}
-
 static inline void cx18_write_reg(struct cx18 *cx, u32 val, u32 reg)
 {
-	if (cx18_retry_mmio)
-		cx18_write_reg_retry(cx, val, reg);
-	else
-		cx18_write_reg_noretry(cx, val, reg);
-}
-
-static inline void _cx18_write_reg_expect(struct cx18 *cx, u32 val, u32 reg,
-					  u32 eval, u32 mask)
-{
-	_cx18_writel_expect(cx, val, cx->reg_mem + reg, eval, mask);
+	cx18_writel(cx, val, cx->reg_mem + reg);
 }
 
 static inline void cx18_write_reg_expect(struct cx18 *cx, u32 val, u32 reg,
 					 u32 eval, u32 mask)
 {
-	if (cx18_retry_mmio)
-		_cx18_write_reg_expect(cx, val, reg, eval, mask);
-	else
-		cx18_write_reg_noretry(cx, val, reg);
-}
-
-
-static inline u32 cx18_read_reg_noretry(struct cx18 *cx, u32 reg)
-{
-	return cx18_readl_noretry(cx, cx->reg_mem + reg);
-}
-
-static inline u32 cx18_read_reg_retry(struct cx18 *cx, u32 reg)
-{
-	return cx18_readl_retry(cx, cx->reg_mem + reg);
+	cx18_writel_expect(cx, val, cx->reg_mem + reg, eval, mask);
 }
 
 static inline u32 cx18_read_reg(struct cx18 *cx, u32 reg)
 {
-	if (cx18_retry_mmio)
-		return cx18_read_reg_retry(cx, reg);
-
-	return cx18_read_reg_noretry(cx, reg);
-}
-
-
-static inline u32 cx18_write_reg_sync_noretry(struct cx18 *cx, u32 val, u32 reg)
-{
-	return cx18_write_sync_noretry(cx, val, cx->reg_mem + reg);
-}
-
-static inline u32 cx18_write_reg_sync_retry(struct cx18 *cx, u32 val, u32 reg)
-{
-	return cx18_write_sync_retry(cx, val, cx->reg_mem + reg);
-}
-
-static inline u32 cx18_write_reg_sync(struct cx18 *cx, u32 val, u32 reg)
-{
-	if (cx18_retry_mmio)
-		return cx18_write_reg_sync_retry(cx, val, reg);
-
-	return cx18_write_reg_sync_noretry(cx, val, reg);
+	return cx18_readl(cx, cx->reg_mem + reg);
 }
 
 
 /* Access "encoder memory" region of CX23418 memory mapped I/O */
-static inline void cx18_write_enc_noretry(struct cx18 *cx, u32 val, u32 addr)
-{
-	cx18_writel_noretry(cx, val, cx->enc_mem + addr);
-}
-
-static inline void cx18_write_enc_retry(struct cx18 *cx, u32 val, u32 addr)
-{
-	cx18_writel_retry(cx, val, cx->enc_mem + addr);
-}
-
 static inline void cx18_write_enc(struct cx18 *cx, u32 val, u32 addr)
 {
-	if (cx18_retry_mmio)
-		cx18_write_enc_retry(cx, val, addr);
-	else
-		cx18_write_enc_noretry(cx, val, addr);
-}
-
-
-static inline u32 cx18_read_enc_noretry(struct cx18 *cx, u32 addr)
-{
-	return cx18_readl_noretry(cx, cx->enc_mem + addr);
-}
-
-static inline u32 cx18_read_enc_retry(struct cx18 *cx, u32 addr)
-{
-	return cx18_readl_retry(cx, cx->enc_mem + addr);
+	cx18_writel(cx, val, cx->enc_mem + addr);
 }
 
 static inline u32 cx18_read_enc(struct cx18 *cx, u32 addr)
 {
-	if (cx18_retry_mmio)
-		return cx18_read_enc_retry(cx, addr);
-
-	return cx18_read_enc_noretry(cx, addr);
-}
-
-static inline
-u32 cx18_write_enc_sync_noretry(struct cx18 *cx, u32 val, u32 addr)
-{
-	return cx18_write_sync_noretry(cx, val, cx->enc_mem + addr);
-}
-
-static inline
-u32 cx18_write_enc_sync_retry(struct cx18 *cx, u32 val, u32 addr)
-{
-	return cx18_write_sync_retry(cx, val, cx->enc_mem + addr);
-}
-
-static inline
-u32 cx18_write_enc_sync(struct cx18 *cx, u32 val, u32 addr)
-{
-	if (cx18_retry_mmio)
-		return cx18_write_enc_sync_retry(cx, val, addr);
-
-	return cx18_write_enc_sync_noretry(cx, val, addr);
+	return cx18_readl(cx, cx->enc_mem + addr);
 }
 
 void cx18_sw1_irq_enable(struct cx18 *cx, u32 val);
diff --git a/linux/drivers/media/video/cx18/cx18-ioctl.c b/linux/drivers/media/video/cx18/cx18-ioctl.c
index 20c7650d7..5d9c1146e 100644
--- a/linux/drivers/media/video/cx18/cx18-ioctl.c
+++ b/linux/drivers/media/video/cx18/cx18-ioctl.c
@@ -4,6 +4,7 @@
  *  Derived from ivtv-ioctl.c
  *
  *  Copyright (C) 2007  Hans Verkuil <hverkuil@xs4all.nl>
+ *  Copyright (C) 2008  Andy Walls <awalls@radix.net>
  *
  *  This program is free software; you can redistribute it and/or modify
  *  it under the terms of the GNU General Public License as published by
@@ -857,7 +858,6 @@ static int cx18_log_status(struct file *file, void *fh)
 	CX18_INFO("Read MPEG/VBI: %lld/%lld bytes\n",
 			(long long)cx->mpg_data_received,
 			(long long)cx->vbi_data_inserted);
-	cx18_log_statistics(cx);
 	CX18_INFO("==================  END STATUS CARD #%d  ==================\n", cx->num);
 	return 0;
 }
diff --git a/linux/drivers/media/video/cx18/cx18-ioctl.h b/linux/drivers/media/video/cx18/cx18-ioctl.h
index 2222f679d..08fe24e95 100644
--- a/linux/drivers/media/video/cx18/cx18-ioctl.h
+++ b/linux/drivers/media/video/cx18/cx18-ioctl.h
@@ -4,6 +4,7 @@
  *  Derived from ivtv-ioctl.h
  *
  *  Copyright (C) 2007  Hans Verkuil <hverkuil@xs4all.nl>
+ *  Copyright (C) 2008  Andy Walls <awalls@radix.net>
  *
  *  This program is free software; you can redistribute it and/or modify
  *  it under the terms of the GNU General Public License as published by
diff --git a/linux/drivers/media/video/cx18/cx18-irq.c b/linux/drivers/media/video/cx18/cx18-irq.c
index 3e23fc350..8c22637f4 100644
--- a/linux/drivers/media/video/cx18/cx18-irq.c
+++ b/linux/drivers/media/video/cx18/cx18-irq.c
@@ -2,6 +2,7 @@
  *  cx18 interrupt handling
  *
  *  Copyright (C) 2007  Hans Verkuil <hverkuil@xs4all.nl>
+ *  Copyright (C) 2008  Andy Walls <awalls@radix.net>
  *
  *  This program is free software; you can redistribute it and/or modify
  *  it under the terms of the GNU General Public License as published by
@@ -21,127 +22,9 @@
 
 #include "cx18-driver.h"
 #include "cx18-io.h"
-#include "cx18-firmware.h"
-#include "cx18-fileops.h"
-#include "cx18-queue.h"
 #include "cx18-irq.h"
-#include "cx18-ioctl.h"
 #include "cx18-mailbox.h"
-#include "cx18-vbi.h"
 #include "cx18-scb.h"
-#include "cx18-dvb.h"
-
-#if LINUX_VERSION_CODE >= KERNEL_VERSION(2, 6, 20)
-void cx18_work_handler(struct work_struct *work)
-{
-	struct cx18 *cx = container_of(work, struct cx18, work);
-#else
-void cx18_work_handler(void *arg)
-{
-	struct cx18 *cx = arg;
-#endif
-	if (test_and_clear_bit(CX18_F_I_WORK_HANDLER_DVB, &cx->i_flags))
-		cx18_dvb_work_handler(cx);
-}
-
-static void epu_dma_done(struct cx18 *cx, struct cx18_mailbox *mb, int rpu)
-{
-	u32 handle = mb->args[0];
-	struct cx18_stream *s = NULL;
-	struct cx18_buffer *buf;
-	u32 off;
-	int i;
-	int id;
-
-	for (i = 0; i < CX18_MAX_STREAMS; i++) {
-		s = &cx->streams[i];
-		if ((handle == s->handle) && (s->dvb.enabled))
-			break;
-		if (s->v4l2dev && handle == s->handle)
-			break;
-	}
-	if (i == CX18_MAX_STREAMS) {
-		CX18_WARN("Got DMA done notification for unknown/inactive"
-			  " handle %d\n", handle);
-		mb->error = CXERR_NOT_OPEN;
-		mb->cmd = 0;
-		cx18_mb_ack(cx, mb, rpu);
-		return;
-	}
-
-	off = mb->args[1];
-	if (mb->args[2] != 1)
-		CX18_WARN("Ack struct = %d for %s\n",
-			mb->args[2], s->name);
-	id = cx18_read_enc(cx, off);
-	buf = cx18_queue_get_buf_irq(s, id, cx18_read_enc(cx, off + 4));
-	CX18_DEBUG_HI_DMA("DMA DONE for %s (buffer %d)\n", s->name, id);
-	if (buf) {
-		cx18_buf_sync_for_cpu(s, buf);
-		if (s->type == CX18_ENC_STREAM_TYPE_TS && s->dvb.enabled) {
-			CX18_DEBUG_HI_DMA("TS recv bytesused = %d\n",
-					buf->bytesused);
-
-			set_bit(CX18_F_I_WORK_HANDLER_DVB, &cx->i_flags);
-			set_bit(CX18_F_I_HAVE_WORK, &cx->i_flags);
-		} else
-			set_bit(CX18_F_B_NEED_BUF_SWAP, &buf->b_flags);
-	} else {
-		CX18_WARN("Could not find buf %d for stream %s\n",
-				cx18_read_enc(cx, off), s->name);
-	}
-	mb->error = 0;
-	mb->cmd = 0;
-	cx18_mb_ack(cx, mb, rpu);
-	wake_up(&cx->dma_waitq);
-	if (s->id != -1)
-		wake_up(&s->waitq);
-}
-
-static void epu_debug(struct cx18 *cx, struct cx18_mailbox *mb, int rpu)
-{
-	char str[256] = { 0 };
-	char *p;
-
-	if (mb->args[1]) {
-		cx18_setup_page(cx, mb->args[1]);
-		cx18_memcpy_fromio(cx, str, cx->enc_mem + mb->args[1], 252);
-		str[252] = 0;
-	}
-	cx18_mb_ack(cx, mb, rpu);
-	CX18_DEBUG_INFO("%x %s\n", mb->args[0], str);
-	p = strchr(str, '.');
-	if (!test_bit(CX18_F_I_LOADED_FW, &cx->i_flags) && p && p > str)
-		CX18_INFO("FW version: %s\n", p - 1);
-}
-
-static void epu_cmd(struct cx18 *cx, u32 sw1)
-{
-	struct cx18_mailbox mb;
-
-	if (sw1 & IRQ_CPU_TO_EPU) {
-		cx18_memcpy_fromio(cx, &mb, &cx->scb->cpu2epu_mb, sizeof(mb));
-		mb.error = 0;
-
-		switch (mb.cmd) {
-		case CX18_EPU_DMA_DONE:
-			epu_dma_done(cx, &mb, CPU);
-			break;
-		case CX18_EPU_DEBUG:
-			epu_debug(cx, &mb, CPU);
-			break;
-		default:
-			CX18_WARN("Unknown CPU_TO_EPU mailbox command %#08x\n",
-				  mb.cmd);
-			break;
-		}
-	}
-
-	if (sw1 & IRQ_APU_TO_EPU) {
-		cx18_memcpy_fromio(cx, &mb, &cx->scb->apu2epu_mb, sizeof(mb));
-		CX18_WARN("Unknown APU_TO_EPU mailbox command %#08x\n", mb.cmd);
-	}
-}
 
 static void xpu_ack(struct cx18 *cx, u32 sw2)
 {
@@ -151,6 +34,14 @@ static void xpu_ack(struct cx18 *cx, u32 sw2)
 		wake_up(&cx->mb_apu_waitq);
 }
 
+static void epu_cmd(struct cx18 *cx, u32 sw1)
+{
+	if (sw1 & IRQ_CPU_TO_EPU)
+		cx18_api_epu_cmd_irq(cx, CPU);
+	if (sw1 & IRQ_APU_TO_EPU)
+		cx18_api_epu_cmd_irq(cx, APU);
+}
+
 #if LINUX_VERSION_CODE <= KERNEL_VERSION(2, 6, 18)
 irqreturn_t cx18_irq_handler(int irq, void *dev_id, struct pt_regs *regs)
 #else
@@ -158,16 +49,11 @@ irqreturn_t cx18_irq_handler(int irq, void *dev_id)
 #endif
 {
 	struct cx18 *cx = (struct cx18 *)dev_id;
-	u32 sw1, sw1_mask;
-	u32 sw2, sw2_mask;
-	u32 hw2, hw2_mask;
+	u32 sw1, sw2, hw2;
 
-	sw1_mask = cx18_read_reg(cx, SW1_INT_ENABLE_PCI);
-	sw1 = cx18_read_reg(cx, SW1_INT_STATUS) & sw1_mask;
-	sw2_mask = cx18_read_reg(cx, SW2_INT_ENABLE_PCI);
-	sw2 = cx18_read_reg(cx, SW2_INT_STATUS) & sw2_mask;
-	hw2_mask = cx18_read_reg(cx, HW2_INT_MASK5_PCI);
-	hw2 = cx18_read_reg(cx, HW2_INT_CLR_STATUS) & hw2_mask;
+	sw1 = cx18_read_reg(cx, SW1_INT_STATUS) & cx->sw1_irq_mask;
+	sw2 = cx18_read_reg(cx, SW2_INT_STATUS) & cx->sw2_irq_mask;
+	hw2 = cx18_read_reg(cx, HW2_INT_CLR_STATUS) & cx->hw2_irq_mask;
 
 	if (sw1)
 		cx18_write_reg_expect(cx, sw1, SW1_INT_STATUS, ~sw1, sw1);
@@ -180,6 +66,13 @@ irqreturn_t cx18_irq_handler(int irq, void *dev_id)
 		CX18_DEBUG_HI_IRQ("received interrupts "
 				  "SW1: %x  SW2: %x  HW2: %x\n", sw1, sw2, hw2);
 
+	/*
+	 * SW1 responses have to happen first.  The sending XPU times out the
+	 * incoming mailboxes on us rather rapidly.
+	 */
+	if (sw1)
+		epu_cmd(cx, sw1);
+
 	/* To do: interrupt-based I2C handling
 	if (hw2 & (HW2_I2C1_INT|HW2_I2C2_INT)) {
 	}
@@ -188,11 +81,5 @@ irqreturn_t cx18_irq_handler(int irq, void *dev_id)
 	if (sw2)
 		xpu_ack(cx, sw2);
 
-	if (sw1)
-		epu_cmd(cx, sw1);
-
-	if (test_and_clear_bit(CX18_F_I_HAVE_WORK, &cx->i_flags))
-		schedule_work(&cx->work);
-
 	return (sw1 || sw2 || hw2) ? IRQ_HANDLED : IRQ_NONE;
 }
diff --git a/linux/drivers/media/video/cx18/cx18-irq.h b/linux/drivers/media/video/cx18/cx18-irq.h
index 6472e42c6..b94ca6019 100644
--- a/linux/drivers/media/video/cx18/cx18-irq.h
+++ b/linux/drivers/media/video/cx18/cx18-irq.h
@@ -2,6 +2,7 @@
  *  cx18 interrupt handling
  *
  *  Copyright (C) 2007  Hans Verkuil <hverkuil@xs4all.nl>
+ *  Copyright (C) 2008  Andy Walls <awalls@radix.net>
  *
  *  This program is free software; you can redistribute it and/or modify
  *  it under the terms of the GNU General Public License as published by
@@ -36,9 +37,3 @@ irqreturn_t cx18_irq_handler(int irq, void *dev_id, struct pt_regs *regs);
 #else
 irqreturn_t cx18_irq_handler(int irq, void *dev_id);
 #endif
-
-#if LINUX_VERSION_CODE >= KERNEL_VERSION(2, 6, 20)
-void cx18_work_handler(struct work_struct *work);
-#else
-void cx18_work_handler(void *arg);
-#endif
diff --git a/linux/drivers/media/video/cx18/cx18-mailbox.c b/linux/drivers/media/video/cx18/cx18-mailbox.c
index 35f7188d4..f62aee719 100644
--- a/linux/drivers/media/video/cx18/cx18-mailbox.c
+++ b/linux/drivers/media/video/cx18/cx18-mailbox.c
@@ -2,6 +2,7 @@
  *  cx18 mailbox functions
  *
  *  Copyright (C) 2007  Hans Verkuil <hverkuil@xs4all.nl>
+ *  Copyright (C) 2008  Andy Walls <awalls@radix.net>
  *
  *  This program is free software; you can redistribute it and/or modify
  *  it under the terms of the GNU General Public License as published by
@@ -26,6 +27,10 @@
 #include "cx18-scb.h"
 #include "cx18-irq.h"
 #include "cx18-mailbox.h"
+#include "cx18-queue.h"
+#include "cx18-streams.h"
+
+static const char *rpu_str[] = { "APU", "CPU", "EPU", "HPU" };
 
 #define API_FAST (1 << 2) /* Short timeout */
 #define API_SLOW (1 << 3) /* Additional 300ms timeout */
@@ -92,12 +97,187 @@ static const struct cx18_api_info *find_api_info(u32 cmd)
 	return NULL;
 }
 
-long cx18_mb_ack(struct cx18 *cx, const struct cx18_mailbox *mb, int rpu)
+static void dump_mb(struct cx18 *cx, struct cx18_mailbox *mb, char *name)
+{
+	char argstr[MAX_MB_ARGUMENTS*11+1];
+	char *p;
+	int i;
+
+	if (!(cx18_debug & CX18_DBGFLG_API))
+		return;
+
+	for (i = 0, p = argstr; i < MAX_MB_ARGUMENTS; i++, p += 11) {
+		/* kernel snprintf() appends '\0' always */
+		snprintf(p, 12, " %#010x", mb->args[i]);
+	}
+	CX18_DEBUG_API("%s: req %#010x ack %#010x cmd %#010x err %#010x args%s"
+		"\n", name, mb->request, mb->ack, mb->cmd, mb->error, argstr);
+}
+
+
+/*
+ * Functions that run in a work_queue work handling context
+ */
+
+static void epu_dma_done(struct cx18 *cx, struct cx18_epu_work_order *order)
+{
+	u32 handle, mdl_ack_count, id;
+	struct cx18_mailbox *mb;
+	struct cx18_mdl_ack *mdl_ack;
+	struct cx18_stream *s;
+	struct cx18_buffer *buf;
+	int i;
+
+	mb = &order->mb;
+	handle = mb->args[0];
+	s = cx18_handle_to_stream(cx, handle);
+
+	if (s == NULL) {
+		CX18_WARN("Got DMA done notification for unknown/inactive"
+			  " handle %d, %s mailbox seq no %d\n", handle,
+			  (order->flags & CX18_F_EWO_MB_STALE_UPON_RECEIPT) ?
+			  "stale" : "good", mb->request);
+		return;
+	}
+
+	mdl_ack_count = mb->args[2];
+	mdl_ack = order->mdl_ack;
+	for (i = 0; i < mdl_ack_count; i++, mdl_ack++) {
+		id = mdl_ack->id;
+		/*
+		 * Simple integrity check for processing a stale (and possibly
+		 * inconsistent mailbox): make sure the buffer id is in the
+		 * valid range for the stream.
+		 *
+		 * We go through the trouble of dealing with stale mailboxes
+		 * because most of the time, the mailbox data is still valid and
+		 * unchanged (and in practice the firmware ping-pongs the
+		 * two mdl_ack buffers so mdl_acks are not stale).
+		 *
+		 * There are occasions when we get a half changed mailbox,
+		 * which this check catches for a handle & id mismatch.  If the
+		 * handle and id do correspond, the worst case is that we
+		 * completely lost the old buffer, but pick up the new buffer
+		 * early (but the new mdl_ack is guaranteed to be good in this
+		 * case as the firmware wouldn't point us to a new mdl_ack until
+		 * it's filled in).
+		 *
+		 * cx18_queue_get buf() will detect the lost buffers
+		 * and put them back in rotation eventually.
+		 */
+		if ((order->flags & CX18_F_EWO_MB_STALE_UPON_RECEIPT) &&
+		    !(id >= s->mdl_offset &&
+		      id < (s->mdl_offset + s->buffers))) {
+			CX18_WARN("Fell behind! Ignoring stale mailbox with "
+				  " inconsistent data. Lost buffer for mailbox "
+				  "seq no %d\n", mb->request);
+			break;
+		}
+		buf = cx18_queue_get_buf(s, id, mdl_ack->data_used);
+		CX18_DEBUG_HI_DMA("DMA DONE for %s (buffer %d)\n", s->name, id);
+		if (buf == NULL) {
+			CX18_WARN("Could not find buf %d for stream %s\n",
+				  id, s->name);
+			continue;
+		}
+
+		cx18_buf_sync_for_cpu(s, buf);
+		if (s->type == CX18_ENC_STREAM_TYPE_TS && s->dvb.enabled) {
+			CX18_DEBUG_HI_DMA("TS recv bytesused = %d\n",
+					  buf->bytesused);
+
+			dvb_dmx_swfilter(&s->dvb.demux, buf->buf,
+					 buf->bytesused);
+
+			cx18_buf_sync_for_device(s, buf);
+			cx18_enqueue(s, buf, &s->q_free);
+
+			if (s->handle != CX18_INVALID_TASK_HANDLE &&
+			    test_bit(CX18_F_S_STREAMING, &s->s_flags))
+				cx18_vapi(cx,
+				       CX18_CPU_DE_SET_MDL, 5, s->handle,
+				       (void __iomem *)
+				       &cx->scb->cpu_mdl[buf->id] - cx->enc_mem,
+				       1, buf->id, s->buf_size);
+		} else
+			set_bit(CX18_F_B_NEED_BUF_SWAP, &buf->b_flags);
+	}
+	wake_up(&cx->dma_waitq);
+	if (s->id != -1)
+		wake_up(&s->waitq);
+}
+
+static void epu_debug(struct cx18 *cx, struct cx18_epu_work_order *order)
+{
+	char *p;
+	char *str = order->str;
+
+	CX18_DEBUG_INFO("%x %s\n", order->mb.args[0], str);
+	p = strchr(str, '.');
+	if (!test_bit(CX18_F_I_LOADED_FW, &cx->i_flags) && p && p > str)
+		CX18_INFO("FW version: %s\n", p - 1);
+}
+
+static void epu_cmd(struct cx18 *cx, struct cx18_epu_work_order *order)
+{
+	switch (order->rpu) {
+	case CPU:
+	{
+		switch (order->mb.cmd) {
+		case CX18_EPU_DMA_DONE:
+			epu_dma_done(cx, order);
+			break;
+		case CX18_EPU_DEBUG:
+			epu_debug(cx, order);
+			break;
+		default:
+			CX18_WARN("Unknown CPU to EPU mailbox command %#0x\n",
+				  order->mb.cmd);
+			break;
+		}
+		break;
+	}
+	case APU:
+		CX18_WARN("Unknown APU to EPU mailbox command %#0x\n",
+			  order->mb.cmd);
+		break;
+	default:
+		break;
+	}
+}
+
+static
+void free_epu_work_order(struct cx18 *cx, struct cx18_epu_work_order *order)
+{
+	atomic_set(&order->pending, 0);
+}
+
+#if LINUX_VERSION_CODE >= KERNEL_VERSION(2, 6, 20)
+void cx18_epu_work_handler(struct work_struct *work)
+{
+	struct cx18_epu_work_order *order =
+			container_of(work, struct cx18_epu_work_order, work);
+#else
+void cx18_epu_work_handler(void *arg)
+{
+	struct cx18_epu_work_order *order = arg;
+#endif
+	struct cx18 *cx = order->cx;
+	epu_cmd(cx, order);
+	free_epu_work_order(cx, order);
+}
+
+
+/*
+ * Functions that run in an interrupt handling context
+ */
+
+static void mb_ack_irq(struct cx18 *cx, struct cx18_epu_work_order *order)
 {
 	struct cx18_mailbox __iomem *ack_mb;
-	u32 ack_irq;
+	u32 ack_irq, req;
 
-	switch (rpu) {
+	switch (order->rpu) {
 	case APU:
 		ack_irq = IRQ_EPU_TO_APU_ACK;
 		ack_mb = &cx->scb->apu2epu_mb;
@@ -108,23 +288,187 @@ long cx18_mb_ack(struct cx18 *cx, const struct cx18_mailbox *mb, int rpu)
 		break;
 	default:
 		CX18_WARN("Unhandled RPU (%d) for command %x ack\n",
-			  rpu, mb->cmd);
-		return -EINVAL;
+			  order->rpu, order->mb.cmd);
+		return;
 	}
 
-	cx18_setup_page(cx, SCB_OFFSET);
-	cx18_write_sync(cx, mb->request, &ack_mb->ack);
+	req = order->mb.request;
+	/* Don't ack if the RPU has gotten impatient and timed us out */
+	if (req != cx18_readl(cx, &ack_mb->request) ||
+	    req == cx18_readl(cx, &ack_mb->ack)) {
+		CX18_DEBUG_WARN("Possibly falling behind: %s self-ack'ed our "
+				"incoming %s to EPU mailbox (sequence no. %u) "
+				"while processing\n",
+				rpu_str[order->rpu], rpu_str[order->rpu], req);
+		order->flags |= CX18_F_EWO_MB_STALE_WHILE_PROC;
+		return;
+	}
+	cx18_writel(cx, req, &ack_mb->ack);
 	cx18_write_reg_expect(cx, ack_irq, SW2_INT_SET, ack_irq, ack_irq);
-	return 0;
+	return;
 }
 
-static void cx18_api_log_ack_delay(struct cx18 *cx, int msecs)
+static int epu_dma_done_irq(struct cx18 *cx, struct cx18_epu_work_order *order)
 {
-	if (msecs > CX18_MAX_MB_ACK_DELAY)
-		msecs = CX18_MAX_MB_ACK_DELAY;
-	atomic_inc(&cx->mbox_stats.mb_ack_delay[msecs]);
+	u32 handle, mdl_ack_offset, mdl_ack_count;
+	struct cx18_mailbox *mb;
+
+	mb = &order->mb;
+	handle = mb->args[0];
+	mdl_ack_offset = mb->args[1];
+	mdl_ack_count = mb->args[2];
+
+	if (handle == CX18_INVALID_TASK_HANDLE ||
+	    mdl_ack_count == 0 || mdl_ack_count > CX18_MAX_MDL_ACKS) {
+		if ((order->flags & CX18_F_EWO_MB_STALE) == 0)
+			mb_ack_irq(cx, order);
+		return -1;
+	}
+
+	cx18_memcpy_fromio(cx, order->mdl_ack, cx->enc_mem + mdl_ack_offset,
+			   sizeof(struct cx18_mdl_ack) * mdl_ack_count);
+
+	if ((order->flags & CX18_F_EWO_MB_STALE) == 0)
+		mb_ack_irq(cx, order);
+	return 1;
+}
+
+static
+int epu_debug_irq(struct cx18 *cx, struct cx18_epu_work_order *order)
+{
+	u32 str_offset;
+	char *str = order->str;
+
+	str[0] = '\0';
+	str_offset = order->mb.args[1];
+	if (str_offset) {
+		cx18_setup_page(cx, str_offset);
+		cx18_memcpy_fromio(cx, str, cx->enc_mem + str_offset, 252);
+		str[252] = '\0';
+		cx18_setup_page(cx, SCB_OFFSET);
+	}
+
+	if ((order->flags & CX18_F_EWO_MB_STALE) == 0)
+		mb_ack_irq(cx, order);
+
+	return str_offset ? 1 : 0;
+}
+
+static inline
+int epu_cmd_irq(struct cx18 *cx, struct cx18_epu_work_order *order)
+{
+	int ret = -1;
+
+	switch (order->rpu) {
+	case CPU:
+	{
+		switch (order->mb.cmd) {
+		case CX18_EPU_DMA_DONE:
+			ret = epu_dma_done_irq(cx, order);
+			break;
+		case CX18_EPU_DEBUG:
+			ret = epu_debug_irq(cx, order);
+			break;
+		default:
+			CX18_WARN("Unknown CPU to EPU mailbox command %#0x\n",
+				  order->mb.cmd);
+			break;
+		}
+		break;
+	}
+	case APU:
+		CX18_WARN("Unknown APU to EPU mailbox command %#0x\n",
+			  order->mb.cmd);
+		break;
+	default:
+		break;
+	}
+	return ret;
+}
+
+static inline
+struct cx18_epu_work_order *alloc_epu_work_order_irq(struct cx18 *cx)
+{
+	int i;
+	struct cx18_epu_work_order *order = NULL;
+
+	for (i = 0; i < CX18_MAX_EPU_WORK_ORDERS; i++) {
+		/*
+		 * We only need "pending" atomic to inspect its contents,
+		 * and need not do a check and set because:
+		 * 1. Any work handler thread only clears "pending" and only
+		 * on one, particular work order at a time, per handler thread.
+		 * 2. "pending" is only set here, and we're serialized because
+		 * we're called in an IRQ handler context.
+		 */
+		if (atomic_read(&cx->epu_work_order[i].pending) == 0) {
+			order = &cx->epu_work_order[i];
+			atomic_set(&order->pending, 1);
+			break;
+		}
+	}
+	return order;
+}
+
+void cx18_api_epu_cmd_irq(struct cx18 *cx, int rpu)
+{
+	struct cx18_mailbox __iomem *mb;
+	struct cx18_mailbox *order_mb;
+	struct cx18_epu_work_order *order;
+	int submit;
+
+	switch (rpu) {
+	case CPU:
+		mb = &cx->scb->cpu2epu_mb;
+		break;
+	case APU:
+		mb = &cx->scb->apu2epu_mb;
+		break;
+	default:
+		return;
+	}
+
+	order = alloc_epu_work_order_irq(cx);
+	if (order == NULL) {
+		CX18_WARN("Unable to find blank work order form to schedule "
+			  "incoming mailbox command processing\n");
+		return;
+	}
+
+	order->flags = 0;
+	order->rpu = rpu;
+	order_mb = &order->mb;
+
+	/* mb->cmd and mb->args[0] through mb->args[2] */
+	cx18_memcpy_fromio(cx, &order_mb->cmd, &mb->cmd, 4 * sizeof(u32));
+	/* mb->request and mb->ack.  N.B. we want to read mb->ack last */
+	cx18_memcpy_fromio(cx, &order_mb->request, &mb->request,
+			   2 * sizeof(u32));
+
+	if (order_mb->request == order_mb->ack) {
+		CX18_DEBUG_WARN("Possibly falling behind: %s self-ack'ed our "
+				"incoming %s to EPU mailbox (sequence no. %u)"
+				"\n",
+				rpu_str[rpu], rpu_str[rpu], order_mb->request);
+		dump_mb(cx, order_mb, "incoming");
+		order->flags = CX18_F_EWO_MB_STALE_UPON_RECEIPT;
+	}
+
+	/*
+	 * Individual EPU command processing is responsible for ack-ing
+	 * a non-stale mailbox as soon as possible
+	 */
+	submit = epu_cmd_irq(cx, order);
+	if (submit > 0) {
+		queue_work(cx->work_queue, &order->work);
+	}
 }
 
+
+/*
+ * Functions called from a non-interrupt, non work_queue context
+ */
+
 static int cx18_api_call(struct cx18 *cx, u32 cmd, int args, u32 data[])
 {
 	const struct cx18_api_info *info = find_api_info(cmd);
@@ -167,8 +511,6 @@ static int cx18_api_call(struct cx18 *cx, u32 cmd, int args, u32 data[])
 	}
 
 	mutex_lock(mb_lock);
-	cx18_setup_page(cx, SCB_OFFSET);
-
 	/*
 	 * Wait for an in-use mailbox to complete
 	 *
@@ -181,7 +523,7 @@ static int cx18_api_call(struct cx18 *cx, u32 cmd, int args, u32 data[])
 	 */
 	state = cx18_readl(cx, xpu_state);
 	req = cx18_readl(cx, &mb->request);
-	timeout = msecs_to_jiffies(20); /* 1 field at 50 Hz vertical refresh */
+	timeout = msecs_to_jiffies(10);
 	ret = wait_event_timeout(*waitq,
 				 (ack = cx18_readl(cx, &mb->ack)) == req,
 				 timeout);
@@ -191,8 +533,8 @@ static int cx18_api_call(struct cx18 *cx, u32 cmd, int args, u32 data[])
 		CX18_ERR("mbox was found stuck busy when setting up for %s; "
 			 "clearing busy and trying to proceed\n", info->name);
 	} else if (ret != timeout)
-		CX18_DEBUG_API("waited %u usecs for busy mbox to be acked\n",
-			       jiffies_to_usecs(timeout-ret));
+		CX18_DEBUG_API("waited %u msecs for busy mbox to be acked\n",
+			       jiffies_to_msecs(timeout-ret));
 
 	/* Build the outgoing mailbox */
 	req = ((req & 0xfffffffe) == 0xfffffffe) ? 1 : req + 1;
@@ -206,10 +548,8 @@ static int cx18_api_call(struct cx18 *cx, u32 cmd, int args, u32 data[])
 
 	/*
 	 * Notify the XPU and wait for it to send an Ack back
-	 * 21 ms = ~ 0.5 frames at a frame rate of 24 fps
-	 * 42 ms = ~ 1 frame at a frame rate of 24 fps
 	 */
-	timeout = msecs_to_jiffies((info->flags & API_FAST) ? 21 : 42);
+	timeout = msecs_to_jiffies((info->flags & API_FAST) ? 10 : 20);
 
 	CX18_DEBUG_HI_IRQ("sending interrupt SW1: %x to send %s\n",
 			  irq, info->name);
@@ -219,27 +559,19 @@ static int cx18_api_call(struct cx18 *cx, u32 cmd, int args, u32 data[])
 		       *waitq,
 		       cx18_readl(cx, &mb->ack) == cx18_readl(cx, &mb->request),
 		       timeout);
+
 	if (ret == 0) {
 		/* Timed out */
 		mutex_unlock(mb_lock);
-		i = jiffies_to_msecs(timeout);
-		cx18_api_log_ack_delay(cx, i);
-		CX18_WARN("sending %s timed out waiting %d msecs for RPU "
-			  "acknowledgement\n", info->name, i);
+		CX18_DEBUG_WARN("sending %s timed out waiting %d msecs for RPU "
+				"acknowledgement\n",
+				info->name, jiffies_to_msecs(timeout));
 		return -EINVAL;
-	} else if (ret < 0) {
-		/* Interrupted */
-		mutex_unlock(mb_lock);
-		CX18_WARN("sending %s was interrupted waiting for RPU"
-			  "acknowledgement\n", info->name);
-		return -EINTR;
 	}
 
-	i = jiffies_to_msecs(timeout-ret);
-	cx18_api_log_ack_delay(cx, i);
 	if (ret != timeout)
 		CX18_DEBUG_HI_API("waited %u msecs for %s to be acked\n",
-				  i, info->name);
+				  jiffies_to_msecs(timeout-ret), info->name);
 
 	/* Collect data returned by the XPU */
 	for (i = 0; i < MAX_MB_ARGUMENTS; i++)
diff --git a/linux/drivers/media/video/cx18/cx18-mailbox.h b/linux/drivers/media/video/cx18/cx18-mailbox.h
index 54758f32d..35104458e 100644
--- a/linux/drivers/media/video/cx18/cx18-mailbox.h
+++ b/linux/drivers/media/video/cx18/cx18-mailbox.h
@@ -2,6 +2,7 @@
  *  cx18 mailbox functions
  *
  *  Copyright (C) 2007  Hans Verkuil <hverkuil@xs4all.nl>
+ *  Copyright (C) 2008  Andy Walls <awalls@radix.net>
  *
  *  This program is free software; you can redistribute it and/or modify
  *  it under the terms of the GNU General Public License as published by
@@ -37,6 +38,17 @@
 
 struct cx18;
 
+/*
+ * This structure is used by CPU to provide completed buffers information
+ * Its structure is dictrated by the layout of the SCB, required by the
+ * firmware, but its defintion needs to be here, instead of in cx18-scb.h,
+ * for mailbox work order scheduling
+ */
+struct cx18_mdl_ack {
+    u32 id;        /* ID of a completed MDL */
+    u32 data_used; /* Total data filled in the MDL for buffer 'id' */
+};
+
 /* The cx18_mailbox struct is the mailbox structure which is used for passing
    messages between processors */
 struct cx18_mailbox {
@@ -73,6 +85,13 @@ int cx18_vapi_result(struct cx18 *cx, u32 data[MAX_MB_ARGUMENTS], u32 cmd,
 int cx18_vapi(struct cx18 *cx, u32 cmd, int args, ...);
 int cx18_api_func(void *priv, u32 cmd, int in, int out,
 		u32 data[CX2341X_MBOX_MAX_DATA]);
-long cx18_mb_ack(struct cx18 *cx, const struct cx18_mailbox *mb, int rpu);
+
+void cx18_api_epu_cmd_irq(struct cx18 *cx, int rpu);
+
+#if LINUX_VERSION_CODE >= KERNEL_VERSION(2, 6, 20)
+void cx18_epu_work_handler(struct work_struct *work);
+#else
+void cx18_epu_work_handler(void *arg);
+#endif
 
 #endif
diff --git a/linux/drivers/media/video/cx18/cx18-queue.c b/linux/drivers/media/video/cx18/cx18-queue.c
index 174682c25..7b09c9a3e 100644
--- a/linux/drivers/media/video/cx18/cx18-queue.c
+++ b/linux/drivers/media/video/cx18/cx18-queue.c
@@ -4,6 +4,7 @@
  *  Derived from ivtv-queue.c
  *
  *  Copyright (C) 2007  Hans Verkuil <hverkuil@xs4all.nl>
+ *  Copyright (C) 2008  Andy Walls <awalls@radix.net>
  *
  *  This program is free software; you can redistribute it and/or modify
  *  it under the terms of the GNU General Public License as published by
@@ -44,83 +45,116 @@ void cx18_queue_init(struct cx18_queue *q)
 void cx18_enqueue(struct cx18_stream *s, struct cx18_buffer *buf,
 		struct cx18_queue *q)
 {
-	unsigned long flags = 0;
-
 	/* clear the buffer if it is going to be enqueued to the free queue */
 	if (q == &s->q_free) {
 		buf->bytesused = 0;
 		buf->readpos = 0;
 		buf->b_flags = 0;
+		buf->skipped = 0;
 	}
-	spin_lock_irqsave(&s->qlock, flags);
+	mutex_lock(&s->qlock);
 	list_add_tail(&buf->list, &q->list);
 	atomic_inc(&q->buffers);
 	q->bytesused += buf->bytesused - buf->readpos;
-	spin_unlock_irqrestore(&s->qlock, flags);
+	mutex_unlock(&s->qlock);
 }
 
 struct cx18_buffer *cx18_dequeue(struct cx18_stream *s, struct cx18_queue *q)
 {
 	struct cx18_buffer *buf = NULL;
-	unsigned long flags = 0;
 
-	spin_lock_irqsave(&s->qlock, flags);
+	mutex_lock(&s->qlock);
 	if (!list_empty(&q->list)) {
 		buf = list_entry(q->list.next, struct cx18_buffer, list);
 		list_del_init(q->list.next);
 		atomic_dec(&q->buffers);
 		q->bytesused -= buf->bytesused - buf->readpos;
+		buf->skipped = 0;
 	}
-	spin_unlock_irqrestore(&s->qlock, flags);
+	mutex_unlock(&s->qlock);
 	return buf;
 }
 
-struct cx18_buffer *cx18_queue_get_buf_irq(struct cx18_stream *s, u32 id,
+struct cx18_buffer *cx18_queue_get_buf(struct cx18_stream *s, u32 id,
 	u32 bytesused)
 {
 	struct cx18 *cx = s->cx;
-	struct list_head *p;
-
-	spin_lock(&s->qlock);
-	list_for_each(p, &s->q_free.list) {
-		struct cx18_buffer *buf =
-			list_entry(p, struct cx18_buffer, list);
-
-		if (buf->id != id)
+	struct cx18_buffer *buf;
+	struct cx18_buffer *ret = NULL;
+	struct list_head *p, *t;
+	LIST_HEAD(r);
+
+	mutex_lock(&s->qlock);
+	list_for_each_safe(p, t, &s->q_free.list) {
+		buf = list_entry(p, struct cx18_buffer, list);
+
+		if (buf->id != id) {
+			buf->skipped++;
+			if (buf->skipped >= atomic_read(&s->q_free.buffers)-1) {
+				/* buffer must have fallen out of rotation */
+				atomic_dec(&s->q_free.buffers);
+				list_move_tail(&buf->list, &r);
+				CX18_WARN("Skipped %s, buffer %d, %d "
+					  "times - it must have dropped out of "
+					  "rotation\n", s->name, buf->id,
+					  buf->skipped);
+			}
 			continue;
+		}
 
 		buf->bytesused = bytesused;
 		atomic_dec(&s->q_free.buffers);
-		atomic_inc(&s->q_full.buffers);
-		s->q_full.bytesused += buf->bytesused;
-		list_move_tail(&buf->list, &s->q_full.list);
+		if (s->type == CX18_ENC_STREAM_TYPE_TS) {
+			/*
+			 * TS doesn't use q_full, but for sweeping up lost
+			 * buffers, we want the TS to requeue the buffer just
+			 * before sending the MDL back to the firmware, so we
+			 * pull it off the list here.
+			 */
+			list_del_init(&buf->list);
+		} else {
+			atomic_inc(&s->q_full.buffers);
+			s->q_full.bytesused += buf->bytesused;
+			list_move_tail(&buf->list, &s->q_full.list);
+		}
+
+		ret = buf;
+		break;
+	}
+	mutex_unlock(&s->qlock);
 
-		spin_unlock(&s->qlock);
-		return buf;
+	/* Put lost buffers back into firmware transfer rotation */
+	while (!list_empty(&r)) {
+		buf = list_entry(r.next, struct cx18_buffer, list);
+		list_del_init(r.next);
+		cx18_enqueue(s, buf, &s->q_free);
+		cx18_vapi(cx, CX18_CPU_DE_SET_MDL, 5, s->handle,
+		       (void __iomem *)&cx->scb->cpu_mdl[buf->id] - cx->enc_mem,
+		       1, buf->id, s->buf_size);
+		CX18_INFO("Returning %s, buffer %d back to transfer rotation\n",
+			  s->name, buf->id);
+		/* and there was much rejoicing... */
 	}
-	spin_unlock(&s->qlock);
-	CX18_ERR("Cannot find buffer %d for stream %s\n", id, s->name);
-	return NULL;
+	return ret;
 }
 
 /* Move all buffers of a queue to q_free, while flushing the buffers */
 static void cx18_queue_flush(struct cx18_stream *s, struct cx18_queue *q)
 {
-	unsigned long flags;
 	struct cx18_buffer *buf;
 
 	if (q == &s->q_free)
 		return;
 
-	spin_lock_irqsave(&s->qlock, flags);
+	mutex_lock(&s->qlock);
 	while (!list_empty(&q->list)) {
 		buf = list_entry(q->list.next, struct cx18_buffer, list);
 		list_move_tail(q->list.next, &s->q_free.list);
-		buf->bytesused = buf->readpos = buf->b_flags = 0;
+		buf->bytesused = buf->readpos = buf->b_flags = buf->skipped = 0;
 		atomic_inc(&s->q_free.buffers);
 	}
 	cx18_queue_init(q);
-	spin_unlock_irqrestore(&s->qlock, flags);
+	mutex_unlock(&s->qlock);
 }
 
 void cx18_flush_queues(struct cx18_stream *s)
diff --git a/linux/drivers/media/video/cx18/cx18-queue.h b/linux/drivers/media/video/cx18/cx18-queue.h
index 7f93bb13c..ff50a2b7e 100644
--- a/linux/drivers/media/video/cx18/cx18-queue.h
+++ b/linux/drivers/media/video/cx18/cx18-queue.h
@@ -4,6 +4,7 @@
  *  Derived from ivtv-queue.h
  *
  *  Copyright (C) 2007  Hans Verkuil <hverkuil@xs4all.nl>
+ *  Copyright (C) 2008  Andy Walls <awalls@radix.net>
  *
  *  This program is free software; you can redistribute it and/or modify
  *  it under the terms of the GNU General Public License as published by
@@ -46,7 +47,7 @@ void cx18_queue_init(struct cx18_queue *q);
 void cx18_enqueue(struct cx18_stream *s, struct cx18_buffer *buf,
 	struct cx18_queue *q);
 struct cx18_buffer *cx18_dequeue(struct cx18_stream *s, struct cx18_queue *q);
-struct cx18_buffer *cx18_queue_get_buf_irq(struct cx18_stream *s, u32 id,
+struct cx18_buffer *cx18_queue_get_buf(struct cx18_stream *s, u32 id,
 	u32 bytesused);
 void cx18_flush_queues(struct cx18_stream *s);
 
diff --git a/linux/drivers/media/video/cx18/cx18-scb.c b/linux/drivers/media/video/cx18/cx18-scb.c
index f56d3772a..ac18bd932 100644
--- a/linux/drivers/media/video/cx18/cx18-scb.c
+++ b/linux/drivers/media/video/cx18/cx18-scb.c
@@ -2,6 +2,7 @@
  *  cx18 System Control Block initialization
  *
  *  Copyright (C) 2007  Hans Verkuil <hverkuil@xs4all.nl>
+ *  Copyright (C) 2008  Andy Walls <awalls@radix.net>
  *
  *  This program is free software; you can redistribute it and/or modify
  *  it under the terms of the GNU General Public License as published by
diff --git a/linux/drivers/media/video/cx18/cx18-scb.h b/linux/drivers/media/video/cx18/cx18-scb.h
index 594713bbe..1dc1c431f 100644
--- a/linux/drivers/media/video/cx18/cx18-scb.h
+++ b/linux/drivers/media/video/cx18/cx18-scb.h
@@ -2,6 +2,7 @@
  *  cx18 System Control Block initialization
  *
  *  Copyright (C) 2007  Hans Verkuil <hverkuil@xs4all.nl>
+ *  Copyright (C) 2008  Andy Walls <awalls@radix.net>
  *
  *  This program is free software; you can redistribute it and/or modify
  *  it under the terms of the GNU General Public License as published by
@@ -85,12 +86,6 @@ struct cx18_mdl {
     u32 length; /* Length of the buffer segment */
 };
 
-/* This structure is used by CPU to provide completed buffers information */
-struct cx18_mdl_ack {
-    u32 id;        /* ID of a completed MDL */
-    u32 data_used; /* Total data filled in the MDL for buffer 'id' */
-};
-
 struct cx18_scb {
 	/* These fields form the System Control Block which is used at boot time
 	   for localizing the IPC data as well as the code positions for all
@@ -276,7 +271,7 @@ struct cx18_scb {
 	struct cx18_mailbox  hpu2epu_mb;
 	struct cx18_mailbox  ppu2epu_mb;
 
-	struct cx18_mdl_ack  cpu_mdl_ack[CX18_MAX_STREAMS][2];
+	struct cx18_mdl_ack  cpu_mdl_ack[CX18_MAX_STREAMS][CX18_MAX_MDL_ACKS];
 	struct cx18_mdl      cpu_mdl[1];
 };
 
diff --git a/linux/drivers/media/video/cx18/cx18-streams.c b/linux/drivers/media/video/cx18/cx18-streams.c
index d29a0b61b..f7a7f38d8 100644
--- a/linux/drivers/media/video/cx18/cx18-streams.c
+++ b/linux/drivers/media/video/cx18/cx18-streams.c
@@ -4,6 +4,7 @@
  *  Derived from ivtv-streams.c
  *
  *  Copyright (C) 2007  Hans Verkuil <hverkuil@xs4all.nl>
+ *  Copyright (C) 2008  Andy Walls <awalls@radix.net>
  *
  *  This program is free software; you can redistribute it and/or modify
  *  it under the terms of the GNU General Public License as published by
@@ -132,7 +133,7 @@ static void cx18_stream_init(struct cx18 *cx, int type)
 		s->buffers = 63;
 		s->buf_size = (max_size / s->buffers) & ~0xfff;
 	}
-	spin_lock_init(&s->qlock);
+	mutex_init(&s->qlock);
 	init_waitqueue_head(&s->waitq);
 	s->id = -1;
 	cx18_queue_init(&s->q_free);
@@ -622,3 +623,21 @@ u32 cx18_find_handle(struct cx18 *cx)
 	}
 	return CX18_INVALID_TASK_HANDLE;
 }
+
+struct cx18_stream *cx18_handle_to_stream(struct cx18 *cx, u32 handle)
+{
+	int i;
+	struct cx18_stream *s;
+
+	if (handle == CX18_INVALID_TASK_HANDLE)
+		return NULL;
+
+	for (i = 0; i < CX18_MAX_STREAMS; i++) {
+		s = &cx->streams[i];
+		if (s->handle != handle)
+			continue;
+		if (s->v4l2dev || s->dvb.enabled)
+			return s;
+	}
+	return NULL;
+}
diff --git a/linux/drivers/media/video/cx18/cx18-streams.h b/linux/drivers/media/video/cx18/cx18-streams.h
index f327e947b..7218b1504 100644
--- a/linux/drivers/media/video/cx18/cx18-streams.h
+++ b/linux/drivers/media/video/cx18/cx18-streams.h
@@ -4,6 +4,7 @@
  *  Derived from ivtv-streams.h
  *
  *  Copyright (C) 2007  Hans Verkuil <hverkuil@xs4all.nl>
+ *  Copyright (C) 2008  Andy Walls <awalls@radix.net>
  *
  *  This program is free software; you can redistribute it and/or modify
  *  it under the terms of the GNU General Public License as published by
@@ -22,6 +23,7 @@
  */
 
 u32 cx18_find_handle(struct cx18 *cx);
+struct cx18_stream *cx18_handle_to_stream(struct cx18 *cx, u32 handle);
 int cx18_streams_setup(struct cx18 *cx);
 int cx18_streams_register(struct cx18 *cx);
 void cx18_streams_cleanup(struct cx18 *cx, int unregister);
diff --git a/linux/drivers/media/video/cx18/cx18-version.h b/linux/drivers/media/video/cx18/cx18-version.h
index 366cc1472..eb043d599 100644
--- a/linux/drivers/media/video/cx18/cx18-version.h
+++ b/linux/drivers/media/video/cx18/cx18-version.h
@@ -25,7 +25,7 @@
 #define CX18_DRIVER_NAME "cx18"
 #define CX18_DRIVER_VERSION_MAJOR 1
 #define CX18_DRIVER_VERSION_MINOR 0
-#define CX18_DRIVER_VERSION_PATCHLEVEL 2
+#define CX18_DRIVER_VERSION_PATCHLEVEL 3
 
 #define CX18_VERSION __stringify(CX18_DRIVER_VERSION_MAJOR) "." __stringify(CX18_DRIVER_VERSION_MINOR) "." __stringify(CX18_DRIVER_VERSION_PATCHLEVEL)
 #define CX18_DRIVER_VERSION KERNEL_VERSION(CX18_DRIVER_VERSION_MAJOR, \
diff --git a/linux/drivers/media/video/cx23885/cx23885-cards.c b/linux/drivers/media/video/cx23885/cx23885-cards.c
index dc3f79638..db1e8bdab 100644
--- a/linux/drivers/media/video/cx23885/cx23885-cards.c
+++ b/linux/drivers/media/video/cx23885/cx23885-cards.c
@@ -159,6 +159,10 @@ struct cx23885_board cx23885_boards[] = {
 		.name		= "Leadtek Winfast PxDVR3200 H",
 		.portc		= CX23885_MPEG_DVB,
 	},
+	[CX23885_BOARD_COMPRO_VIDEOMATE_E650F] = {
+		.name		= "Compro VideoMate E650F",
+		.portc		= CX23885_MPEG_DVB,
+	},
 };
 const unsigned int cx23885_bcount = ARRAY_SIZE(cx23885_boards);
 
@@ -238,6 +242,10 @@ struct cx23885_subid cx23885_subids[] = {
 		.subvendor = 0x107d,
 		.subdevice = 0x6681,
 		.card      = CX23885_BOARD_LEADTEK_WINFAST_PXDVR3200_H,
+	}, {
+		.subvendor = 0x185b,
+		.subdevice = 0xe800,
+		.card      = CX23885_BOARD_COMPRO_VIDEOMATE_E650F,
 	},
 };
 const unsigned int cx23885_idcount = ARRAY_SIZE(cx23885_subids);
@@ -391,6 +399,7 @@ int cx23885_tuner_callback(void *priv, int component, int command, int arg)
 	case CX23885_BOARD_HAUPPAUGE_HVR1500:
 	case CX23885_BOARD_HAUPPAUGE_HVR1500Q:
 	case CX23885_BOARD_LEADTEK_WINFAST_PXDVR3200_H:
+	case CX23885_BOARD_COMPRO_VIDEOMATE_E650F:
 		/* Tuner Reset Command */
 		bitmask = 0x04;
 		break;
@@ -531,6 +540,7 @@ void cx23885_gpio_setup(struct cx23885_dev *dev)
 		cx_set(GP0_IO, 0x000f000f);
 		break;
 	case CX23885_BOARD_LEADTEK_WINFAST_PXDVR3200_H:
+	case CX23885_BOARD_COMPRO_VIDEOMATE_E650F:
 		/* GPIO-2  xc3028 tuner reset */
 
 		/* The following GPIO's are on the internal AVCore (cx25840) */
@@ -631,6 +641,7 @@ void cx23885_card_setup(struct cx23885_dev *dev)
 	case CX23885_BOARD_HAUPPAUGE_HVR1700:
 	case CX23885_BOARD_HAUPPAUGE_HVR1400:
 	case CX23885_BOARD_LEADTEK_WINFAST_PXDVR3200_H:
+	case CX23885_BOARD_COMPRO_VIDEOMATE_E650F:
 	default:
 		ts2->gen_ctrl_val  = 0xc; /* Serial bus + punctured clock */
 		ts2->ts_clk_en_val = 0x1; /* Enable TS_CLK */
@@ -645,6 +656,7 @@ void cx23885_card_setup(struct cx23885_dev *dev)
 	case CX23885_BOARD_HAUPPAUGE_HVR1800lp:
 	case CX23885_BOARD_HAUPPAUGE_HVR1700:
 	case CX23885_BOARD_LEADTEK_WINFAST_PXDVR3200_H:
+	case CX23885_BOARD_COMPRO_VIDEOMATE_E650F:
 		request_module("cx25840");
 		break;
 	}
diff --git a/linux/drivers/media/video/cx23885/cx23885-dvb.c b/linux/drivers/media/video/cx23885/cx23885-dvb.c
index a11fdbfb5..990fd217b 100644
--- a/linux/drivers/media/video/cx23885/cx23885-dvb.c
+++ b/linux/drivers/media/video/cx23885/cx23885-dvb.c
@@ -503,6 +503,7 @@ static int dvb_register(struct cx23885_tsport *port)
 		break;
 	}
 	case CX23885_BOARD_LEADTEK_WINFAST_PXDVR3200_H:
+	case CX23885_BOARD_COMPRO_VIDEOMATE_E650F:
 		i2c_bus = &dev->i2c_bus[0];
 
 		fe0->dvb.frontend = dvb_attach(zl10353_attach,
diff --git a/linux/drivers/media/video/cx23885/cx23885-i2c.c b/linux/drivers/media/video/cx23885/cx23885-i2c.c
index ced5648d8..2210b47d2 100644
--- a/linux/drivers/media/video/cx23885/cx23885-i2c.c
+++ b/linux/drivers/media/video/cx23885/cx23885-i2c.c
@@ -353,6 +353,9 @@ static u32 cx23885_functionality(struct i2c_adapter *adap)
 static struct i2c_algorithm cx23885_i2c_algo_template = {
 	.master_xfer	= i2c_xfer,
 	.functionality	= cx23885_functionality,
+#ifdef NEED_ALGO_CONTROL
+	.algo_control = dummy_algo_control,
+#endif
 };
 
 /* ----------------------------------------------------------------------- */
diff --git a/linux/drivers/media/video/cx23885/cx23885.h b/linux/drivers/media/video/cx23885/cx23885.h
index 26f755354..ad93e0e88 100644
--- a/linux/drivers/media/video/cx23885/cx23885.h
+++ b/linux/drivers/media/video/cx23885/cx23885.h
@@ -67,6 +67,7 @@
 #define CX23885_BOARD_DVICO_FUSIONHDTV_7_DUAL_EXP 10
 #define CX23885_BOARD_DVICO_FUSIONHDTV_DVB_T_DUAL_EXP 11
 #define CX23885_BOARD_LEADTEK_WINFAST_PXDVR3200_H 12
+#define CX23885_BOARD_COMPRO_VIDEOMATE_E650F   13
 
 /* Currently unsupported by the driver: PAL/H, NTSC/Kr, SECAM B/G/H/LC */
 #define CX23885_NORMS (\
diff --git a/linux/drivers/media/video/cx88/cx88-alsa.c b/linux/drivers/media/video/cx88/cx88-alsa.c
index 3dd2f6629..f7171586d 100644
--- a/linux/drivers/media/video/cx88/cx88-alsa.c
+++ b/linux/drivers/media/video/cx88/cx88-alsa.c
@@ -795,7 +795,6 @@ static int __devinit snd_cx88_create(struct snd_card *card,
 	core = cx88_core_get(pci);
 	if (NULL == core) {
 		err = -EINVAL;
-		kfree (chip);
 		return err;
 	}
 
@@ -872,7 +871,7 @@ static int __devinit cx88_audio_initdev(struct pci_dev *pci,
 
 	err = snd_cx88_create(card, pci, &chip);
 	if (err < 0)
-		return (err);
+		goto error;
 
 	err = snd_cx88_pcm(chip, 0, "CX88 Digital");
 	if (err < 0)
diff --git a/linux/drivers/media/video/em28xx/em28xx-audio.c b/linux/drivers/media/video/em28xx/em28xx-audio.c
index b86b0870d..c62455202 100644
--- a/linux/drivers/media/video/em28xx/em28xx-audio.c
+++ b/linux/drivers/media/video/em28xx/em28xx-audio.c
@@ -63,7 +63,7 @@ static int em28xx_isoc_audio_deinit(struct em28xx *dev)
 
 	dprintk("Stopping isoc\n");
 	for (i = 0; i < EM28XX_AUDIO_BUFS; i++) {
-		usb_kill_urb(dev->adev->urb[i]);
+		usb_unlink_urb(dev->adev->urb[i]);
 		usb_free_urb(dev->adev->urb[i]);
 		dev->adev->urb[i] = NULL;
 	}
@@ -80,7 +80,9 @@ static void em28xx_audio_isocirq(struct urb *urb)
 	struct em28xx            *dev = urb->context;
 	int                      i;
 	unsigned int             oldptr;
+#ifdef NO_PCM_LOCK
 	unsigned long            flags;
+#endif
 	int                      period_elapsed = 0;
 	int                      status;
 	unsigned char            *cp;
@@ -106,9 +108,26 @@ static void em28xx_audio_isocirq(struct urb *urb)
 			if (!length)
 				continue;
 
+#ifdef NO_PCM_LOCK
 			spin_lock_irqsave(&dev->adev->slock, flags);
-
+#endif
 			oldptr = dev->adev->hwptr_done_capture;
+			if (oldptr + length >= runtime->buffer_size) {
+				unsigned int cnt =
+				    runtime->buffer_size - oldptr;
+				memcpy(runtime->dma_area + oldptr * stride, cp,
+				       cnt * stride);
+				memcpy(runtime->dma_area, cp + cnt * stride,
+				       length * stride - cnt * stride);
+			} else {
+				memcpy(runtime->dma_area + oldptr * stride, cp,
+				       length * stride);
+			}
+
+#ifndef NO_PCM_LOCK
+			snd_pcm_stream_lock(substream);
+#endif
+
 			dev->adev->hwptr_done_capture += length;
 			if (dev->adev->hwptr_done_capture >=
 			    runtime->buffer_size)
@@ -123,19 +142,11 @@ static void em28xx_audio_isocirq(struct urb *urb)
 				period_elapsed = 1;
 			}
 
+#ifdef NO_PCM_LOCK
 			spin_unlock_irqrestore(&dev->adev->slock, flags);
-
-			if (oldptr + length >= runtime->buffer_size) {
-				unsigned int cnt =
-				    runtime->buffer_size - oldptr;
-				memcpy(runtime->dma_area + oldptr * stride, cp,
-				       cnt * stride);
-				memcpy(runtime->dma_area, cp + cnt * stride,
-				       length * stride - cnt * stride);
-			} else {
-				memcpy(runtime->dma_area + oldptr * stride, cp,
-				       length * stride);
-			}
+#else
+			snd_pcm_stream_unlock(substream);
+#endif
 		}
 		if (period_elapsed)
 			snd_pcm_period_elapsed(substream);
diff --git a/linux/drivers/media/video/em28xx/em28xx-cards.c b/linux/drivers/media/video/em28xx/em28xx-cards.c
index 9177ea54b..23d3820a2 100644
--- a/linux/drivers/media/video/em28xx/em28xx-cards.c
+++ b/linux/drivers/media/video/em28xx/em28xx-cards.c
@@ -52,10 +52,87 @@ struct em28xx_hash_table {
 	unsigned int  tuner;
 };
 
+/*
+ *  Reset sequences for analog/digital modes
+ */
+
+/* Reset for the most [analog] boards */
+static struct em28xx_reg_seq default_analog[] = {
+	{EM28XX_R08_GPIO,	0x6d,   ~EM_GPIO_4,	10},
+	{	-1,		-1,	-1,		-1},
+};
+
+/* Reset for the most [digital] boards */
+static struct em28xx_reg_seq default_digital[] = {
+	{EM28XX_R08_GPIO,	0x6e,	~EM_GPIO_4,	10},
+	{	-1,		-1,	-1,		-1},
+};
+
+/* Board Hauppauge WinTV HVR 900 analog */
+static struct em28xx_reg_seq hauppauge_wintv_hvr_900_analog[] = {
+	{EM28XX_R08_GPIO,	0x2d,	~EM_GPIO_4,	10},
+	{0x05,			0xff,	0x10,		10},
+	{  -1,			-1,	-1,		-1},
+};
+
+/* Board Hauppauge WinTV HVR 900 digital */
+static struct em28xx_reg_seq hauppauge_wintv_hvr_900_digital[] = {
+	{EM28XX_R08_GPIO,	0x2e,	~EM_GPIO_4,	10},
+	{EM2880_R04_GPO,	0x04,	0x0f,		10},
+	{EM2880_R04_GPO,	0x0c,	0x0f,		10},
+	{ -1,			-1,	-1,		-1},
+};
+
+/* Boards - EM2880 MSI DIGIVOX AD and EM2880_BOARD_MSI_DIGIVOX_AD_II */
+static struct em28xx_reg_seq em2880_msi_digivox_ad_analog[] = {
+	{EM28XX_R08_GPIO,       0x69,   ~EM_GPIO_4,	 10},
+	{	-1,		-1,	-1,		 -1},
+};
+
+/* Boards - EM2880 MSI DIGIVOX AD and EM2880_BOARD_MSI_DIGIVOX_AD_II */
+#if 0	/* Still missing the dvb setup */
+static struct em28xx_reg_seq em2880_msi_digivox_ad_digital[] = {
+	{EM28XX_R08_GPIO,	0x6a,	~EM_GPIO_4,	10},
+	{	-1,		-1,	-1,		-1},
+};
+#endif
+
+/* Board  - EM2870 Kworld 355u
+   Analog - No input analog */
+#if 0	/* Still missing the dvb setup */
+static struct em28xx_reg_seq em2870_kworld_355u_digital[] = {
+	{EM2880_R04_GPO,	0x01,	0xff,		10},
+	{  -1,			-1,	-1,		-1},
+};
+#endif
+
+/* Callback for the most boards */
+static struct em28xx_reg_seq default_tuner_gpio[] = {
+	{EM28XX_R08_GPIO,	EM_GPIO_4,	EM_GPIO_4,	10},
+	{EM28XX_R08_GPIO,	0,		EM_GPIO_4,	10},
+	{EM28XX_R08_GPIO,	EM_GPIO_4,	EM_GPIO_4,	10},
+	{  -1,			-1,		-1,		-1},
+};
+
+/* Pinnacle PCTV HD Mini (80e) GPIOs
+   0-5: not used
+   6:   demod reset, active low
+   7:   LED on, active high */
+static struct em28xx_reg_seq em2874_pinnacle_80e_digital[] = {
+	{EM28XX_R06_I2C_CLK,    0x45,   0xff,		  10}, /*400 KHz*/
+	{EM2874_R80_GPIO,       0x80,   0xff,		  100},/*Demod reset*/
+	{EM2874_R80_GPIO,       0xc0,   0xff,		  10},
+	{  -1,			-1,	-1,		  -1},
+};
+
+/*
+ *  Board definitions
+ */
 struct em28xx_board em28xx_boards[] = {
 	[EM2750_BOARD_UNKNOWN] = {
 		.name          = "Unknown EM2750/EM2751 webcam grabber",
-		.vchannels     = 1,
+		.xclk          = EM28XX_XCLK_FREQUENCY_48MHZ,
+		.tuner_type    = TUNER_ABSENT,	/* This is a webcam */
 		.input         = { {
 			.type     = EM28XX_VMUX_COMPOSITE1,
 			.vmux     = 0,
@@ -65,10 +142,10 @@ struct em28xx_board em28xx_boards[] = {
 	[EM2800_BOARD_UNKNOWN] = {
 		.name         = "Unknown EM2800 video grabber",
 		.is_em2800    = 1,
-		.vchannels    = 2,
 		.tda9887_conf = TDA9887_PRESENT,
-		.decoder      = EM28XX_SAA7113,
-		.input           = { {
+		.decoder      = EM28XX_SAA711X,
+		.tuner_type   = TUNER_ABSENT,
+		.input        = { {
 			.type     = EM28XX_VMUX_COMPOSITE1,
 			.vmux     = SAA7115_COMPOSITE0,
 			.amux     = EM28XX_AMUX_LINE_IN,
@@ -79,15 +156,15 @@ struct em28xx_board em28xx_boards[] = {
 		} },
 	},
 	[EM2820_BOARD_UNKNOWN] = {
-		.name         = "Unknown EM2750/28xx video grabber",
-		.is_em2800    = 0,
-		.tuner_type   = TUNER_ABSENT,
+		.name          = "Unknown EM2750/28xx video grabber",
+		.tuner_type    = TUNER_ABSENT,
 	},
 	[EM2750_BOARD_DLCW_130] = {
 		/* Beijing Huaqi Information Digital Technology Co., Ltd */
 		.name          = "Huaqi DLCW-130",
 		.valid         = EM28XX_BOARD_NOT_VALIDATED,
-		.vchannels     = 1,
+		.xclk          = EM28XX_XCLK_FREQUENCY_48MHZ,
+		.tuner_type    = TUNER_ABSENT,	/* This is a webcam */
 		.input         = { {
 			.type     = EM28XX_VMUX_COMPOSITE1,
 			.vmux     = 0,
@@ -96,12 +173,10 @@ struct em28xx_board em28xx_boards[] = {
 	},
 	[EM2820_BOARD_KWORLD_PVRTV2800RF] = {
 		.name         = "Kworld PVR TV 2800 RF",
-		.is_em2800    = 0,
-		.vchannels    = 2,
 		.tuner_type   = TUNER_TEMIC_PAL,
 		.tda9887_conf = TDA9887_PRESENT,
-		.decoder      = EM28XX_SAA7113,
-		.input           = { {
+		.decoder      = EM28XX_SAA711X,
+		.input        = { {
 			.type     = EM28XX_VMUX_COMPOSITE1,
 			.vmux     = SAA7115_COMPOSITE0,
 			.amux     = EM28XX_AMUX_LINE_IN,
@@ -113,11 +188,10 @@ struct em28xx_board em28xx_boards[] = {
 	},
 	[EM2820_BOARD_TERRATEC_CINERGY_250] = {
 		.name         = "Terratec Cinergy 250 USB",
-		.vchannels    = 3,
 		.tuner_type   = TUNER_LG_PAL_NEW_TAPC,
 		.tda9887_conf = TDA9887_PRESENT,
-		.decoder      = EM28XX_SAA7113,
-		.input          = { {
+		.decoder      = EM28XX_SAA711X,
+		.input        = { {
 			.type     = EM28XX_VMUX_TELEVISION,
 			.vmux     = SAA7115_COMPOSITE2,
 			.amux     = EM28XX_AMUX_LINE_IN,
@@ -133,11 +207,10 @@ struct em28xx_board em28xx_boards[] = {
 	},
 	[EM2820_BOARD_PINNACLE_USB_2] = {
 		.name         = "Pinnacle PCTV USB 2",
-		.vchannels    = 3,
 		.tuner_type   = TUNER_LG_PAL_NEW_TAPC,
 		.tda9887_conf = TDA9887_PRESENT,
-		.decoder      = EM28XX_SAA7113,
-		.input          = { {
+		.decoder      = EM28XX_SAA711X,
+		.input        = { {
 			.type     = EM28XX_VMUX_TELEVISION,
 			.vmux     = SAA7115_COMPOSITE2,
 			.amux     = EM28XX_AMUX_VIDEO,
@@ -153,15 +226,13 @@ struct em28xx_board em28xx_boards[] = {
 	},
 	[EM2820_BOARD_HAUPPAUGE_WINTV_USB_2] = {
 		.name         = "Hauppauge WinTV USB 2",
-		.vchannels    = 3,
 		.tuner_type   = TUNER_PHILIPS_FM1236_MK3,
 		.tda9887_conf = TDA9887_PRESENT |
 				TDA9887_PORT1_ACTIVE|
 				TDA9887_PORT2_ACTIVE,
 		.decoder      = EM28XX_TVP5150,
 		.has_msp34xx  = 1,
-		/*FIXME: S-Video not tested */
-		.input          = { {
+		.input        = { {
 			.type     = EM28XX_VMUX_TELEVISION,
 			.vmux     = TVP5150_COMPOSITE0,
 			.amux     = MSP_INPUT_DEFAULT,
@@ -175,12 +246,10 @@ struct em28xx_board em28xx_boards[] = {
 	[EM2820_BOARD_DLINK_USB_TV] = {
 		.name         = "D-Link DUB-T210 TV Tuner",
 		.valid        = EM28XX_BOARD_NOT_VALIDATED,
-		.vchannels    = 3,
-		.is_em2800    = 0,
 		.tuner_type   = TUNER_LG_PAL_NEW_TAPC,
 		.tda9887_conf = TDA9887_PRESENT,
-		.decoder      = EM28XX_SAA7113,
-		.input          = { {
+		.decoder      = EM28XX_SAA711X,
+		.input        = { {
 			.type     = EM28XX_VMUX_TELEVISION,
 			.vmux     = SAA7115_COMPOSITE2,
 			.amux     = EM28XX_AMUX_LINE_IN,
@@ -197,10 +266,9 @@ struct em28xx_board em28xx_boards[] = {
 	[EM2820_BOARD_HERCULES_SMART_TV_USB2] = {
 		.name         = "Hercules Smart TV USB 2.0",
 		.valid        = EM28XX_BOARD_NOT_VALIDATED,
-		.vchannels    = 3,
 		.tuner_type   = TUNER_LG_PAL_NEW_TAPC,
 		.tda9887_conf = TDA9887_PRESENT,
-		.decoder      = EM28XX_SAA7113,
+		.decoder      = EM28XX_SAA711X,
 		.input        = { {
 			.type     = EM28XX_VMUX_TELEVISION,
 			.vmux     = SAA7115_COMPOSITE2,
@@ -218,12 +286,10 @@ struct em28xx_board em28xx_boards[] = {
 	[EM2820_BOARD_PINNACLE_USB_2_FM1216ME] = {
 		.name         = "Pinnacle PCTV USB 2 (Philips FM1216ME)",
 		.valid        = EM28XX_BOARD_NOT_VALIDATED,
-		.vchannels    = 3,
-		.is_em2800    = 0,
 		.tuner_type   = TUNER_PHILIPS_FM1216ME_MK3,
 		.tda9887_conf = TDA9887_PRESENT,
-		.decoder      = EM28XX_SAA7113,
-		.input          = { {
+		.decoder      = EM28XX_SAA711X,
+		.input        = { {
 			.type     = EM28XX_VMUX_TELEVISION,
 			.vmux     = SAA7115_COMPOSITE2,
 			.amux     = EM28XX_AMUX_VIDEO,
@@ -240,11 +306,10 @@ struct em28xx_board em28xx_boards[] = {
 	[EM2820_BOARD_GADMEI_UTV310] = {
 		.name         = "Gadmei UTV310",
 		.valid        = EM28XX_BOARD_NOT_VALIDATED,
-		.vchannels    = 3,
 		.tuner_type   = TUNER_TNF_5335MF,
 		.tda9887_conf = TDA9887_PRESENT,
-		.decoder      = EM28XX_SAA7113,
-		.input          = { {
+		.decoder      = EM28XX_SAA711X,
+		.input        = { {
 			.type     = EM28XX_VMUX_TELEVISION,
 			.vmux     = SAA7115_COMPOSITE1,
 			.amux     = EM28XX_AMUX_LINE_IN,
@@ -261,30 +326,28 @@ struct em28xx_board em28xx_boards[] = {
 	[EM2820_BOARD_LEADTEK_WINFAST_USBII_DELUXE] = {
 		.name         = "Leadtek Winfast USB II Deluxe",
 		.valid        = EM28XX_BOARD_NOT_VALIDATED,
-		.vchannels    = 3,
 		.tuner_type   = TUNER_PHILIPS_FM1216ME_MK3,
 		.tda9887_conf = TDA9887_PRESENT,
-		.decoder      = EM28XX_SAA7114,
-		.input          = { {
+		.decoder      = EM28XX_SAA711X,
+		.input        = { {
 			.type     = EM28XX_VMUX_TELEVISION,
-			.vmux     = 2,
+			.vmux     = SAA7115_COMPOSITE2,
 			.amux     = EM28XX_AMUX_VIDEO,
 		}, {
 			.type     = EM28XX_VMUX_COMPOSITE1,
-			.vmux     = 0,
+			.vmux     = SAA7115_COMPOSITE0,
 			.amux     = EM28XX_AMUX_LINE_IN,
 		}, {
 			.type     = EM28XX_VMUX_SVIDEO,
-			.vmux     = 9,
+			.vmux     = SAA7115_COMPOSITE0,
 			.amux     = EM28XX_AMUX_LINE_IN,
 		} },
 	},
 	[EM2820_BOARD_PINNACLE_DVC_100] = {
 		.name         = "Pinnacle Dazzle DVC 100",
-		.valid        = EM28XX_BOARD_NOT_VALIDATED,
-		.vchannels    = 3,
-		.decoder      = EM28XX_SAA7113,
-		.input          = { {
+		.decoder      = EM28XX_SAA711X,
+		.tuner_type   = TUNER_ABSENT,	/* Capture only device */
+		.input        = { {
 			.type     = EM28XX_VMUX_COMPOSITE1,
 			.vmux     = SAA7115_COMPOSITE0,
 			.amux     = EM28XX_AMUX_LINE_IN,
@@ -295,10 +358,10 @@ struct em28xx_board em28xx_boards[] = {
 		} },
 	},
 	[EM2820_BOARD_VIDEOLOGY_20K14XUSB] = {
-		.name          = "Videology 20K14XUSB USB2.0",
+		.name         = "Videology 20K14XUSB USB2.0",
 		.valid        = EM28XX_BOARD_NOT_VALIDATED,
-		.vchannels     = 1,
-		.input         = { {
+		.tuner_type   = TUNER_ABSENT,	/* This is a webcam */
+		.input        = { {
 			.type     = EM28XX_VMUX_COMPOSITE1,
 			.vmux     = 0,
 			.amux     = EM28XX_AMUX_VIDEO,
@@ -307,12 +370,10 @@ struct em28xx_board em28xx_boards[] = {
 	[EM2821_BOARD_PROLINK_PLAYTV_USB2] = {
 		.name         = "SIIG AVTuner-PVR/Prolink PlayTV USB 2.0",
 		.valid        = EM28XX_BOARD_NOT_VALIDATED,
-		.vchannels    = 3,
-		.is_em2800    = 0,
 		.tuner_type   = TUNER_LG_PAL_NEW_TAPC,	/* unknown? */
 		.tda9887_conf = TDA9887_PRESENT,	/* unknown? */
-		.decoder      = EM28XX_SAA7113,
-		.input          = { {
+		.decoder      = EM28XX_SAA711X,
+		.input        = { {
 			.type     = EM28XX_VMUX_TELEVISION,
 			.vmux     = SAA7115_COMPOSITE2,
 			.amux     = EM28XX_AMUX_LINE_IN,
@@ -329,14 +390,12 @@ struct em28xx_board em28xx_boards[] = {
 	[EM2821_BOARD_SUPERCOMP_USB_2] = {
 		.name         = "Supercomp USB 2.0 TV",
 		.valid        = EM28XX_BOARD_NOT_VALIDATED,
-		.vchannels    = 3,
-		.is_em2800    = 0,
 		.tuner_type   = TUNER_PHILIPS_FM1236_MK3,
 		.tda9887_conf = TDA9887_PRESENT |
 				TDA9887_PORT1_ACTIVE |
 				TDA9887_PORT2_ACTIVE,
-		.decoder      = EM28XX_SAA7113,
-		.input          = { {
+		.decoder      = EM28XX_SAA711X,
+		.input        = { {
 			.type     = EM28XX_VMUX_TELEVISION,
 			.vmux     = SAA7115_COMPOSITE2,
 			.amux     = EM28XX_AMUX_LINE_IN,
@@ -351,11 +410,11 @@ struct em28xx_board em28xx_boards[] = {
 		} },
 	},
 	[EM2821_BOARD_USBGEAR_VD204] = {
-		.name          = "Usbgear VD204v9",
+		.name         = "Usbgear VD204v9",
 		.valid        = EM28XX_BOARD_NOT_VALIDATED,
-		.vchannels     = 2,
-		.decoder       = EM28XX_SAA7113,
-		.input          = { {
+		.tuner_type   = TUNER_ABSENT,	/* Capture only device */
+		.decoder      = EM28XX_SAA711X,
+		.input        = { {
 			.type  = EM28XX_VMUX_COMPOSITE1,
 			.vmux  = SAA7115_COMPOSITE0,
 			.amux  = EM28XX_AMUX_LINE_IN,
@@ -367,21 +426,20 @@ struct em28xx_board em28xx_boards[] = {
 	},
 	[EM2860_BOARD_NETGMBH_CAM] = {
 		/* Beijing Huaqi Information Digital Technology Co., Ltd */
-		.name          = "NetGMBH Cam",
-		.valid       = EM28XX_BOARD_NOT_VALIDATED,
-		.vchannels     = 1,
-		.input         = { {
+		.name         = "NetGMBH Cam",
+		.valid        = EM28XX_BOARD_NOT_VALIDATED,
+		.tuner_type   = TUNER_ABSENT,	/* This is a webcam */
+		.input        = { {
 			.type     = EM28XX_VMUX_COMPOSITE1,
 			.vmux     = 0,
 			.amux     = EM28XX_AMUX_VIDEO,
 		} },
 	},
 	[EM2860_BOARD_TYPHOON_DVD_MAKER] = {
-		.name          = "Typhoon DVD Maker",
-		.valid        = EM28XX_BOARD_NOT_VALIDATED,
-		.vchannels     = 2,
-		.decoder       = EM28XX_SAA7113,
-		.input          = { {
+		.name         = "Typhoon DVD Maker",
+		.decoder      = EM28XX_SAA711X,
+		.tuner_type   = TUNER_ABSENT,	/* Capture only device */
+		.input        = { {
 			.type  = EM28XX_VMUX_COMPOSITE1,
 			.vmux  = SAA7115_COMPOSITE0,
 			.amux  = EM28XX_AMUX_LINE_IN,
@@ -394,11 +452,10 @@ struct em28xx_board em28xx_boards[] = {
 	[EM2860_BOARD_GADMEI_UTV330] = {
 		.name         = "Gadmei UTV330",
 		.valid        = EM28XX_BOARD_NOT_VALIDATED,
-		.vchannels    = 3,
 		.tuner_type   = TUNER_TNF_5335MF,
 		.tda9887_conf = TDA9887_PRESENT,
-		.decoder      = EM28XX_SAA7113,
-		.input          = { {
+		.decoder      = EM28XX_SAA711X,
+		.input        = { {
 			.type     = EM28XX_VMUX_TELEVISION,
 			.vmux     = SAA7115_COMPOSITE2,
 			.amux     = EM28XX_AMUX_VIDEO,
@@ -415,30 +472,38 @@ struct em28xx_board em28xx_boards[] = {
 	[EM2860_BOARD_TERRATEC_HYBRID_XS] = {
 		.name         = "Terratec Cinergy A Hybrid XS",
 		.valid        = EM28XX_BOARD_NOT_VALIDATED,
-		.vchannels    = 3,
 		.tuner_type   = TUNER_XC2028,
+		.tuner_gpio   = default_tuner_gpio,
 		.decoder      = EM28XX_TVP5150,
-		.input          = { {
+
+#if 0 /* FIXME: add an entry at em28xx-dvb */
+		.has_dvb      = 1,
+		.dvb_gpio     = hauppauge_wintv_hvr_900_digital,
+#endif
+		.input        = { {
 			.type     = EM28XX_VMUX_TELEVISION,
 			.vmux     = TVP5150_COMPOSITE0,
 			.amux     = EM28XX_AMUX_VIDEO,
+			.gpio     = hauppauge_wintv_hvr_900_analog,
 		}, {
 			.type     = EM28XX_VMUX_COMPOSITE1,
 			.vmux     = TVP5150_COMPOSITE1,
 			.amux     = EM28XX_AMUX_LINE_IN,
+			.gpio     = hauppauge_wintv_hvr_900_analog,
 		}, {
 			.type     = EM28XX_VMUX_SVIDEO,
 			.vmux     = TVP5150_SVIDEO,
 			.amux     = EM28XX_AMUX_LINE_IN,
+			.gpio     = hauppauge_wintv_hvr_900_analog,
 		} },
 	},
 	[EM2861_BOARD_KWORLD_PVRTV_300U] = {
 		.name	      = "KWorld PVRTV 300U",
 		.valid        = EM28XX_BOARD_NOT_VALIDATED,
-		.vchannels    = 3,
 		.tuner_type   = TUNER_XC2028,
+		.tuner_gpio   = default_tuner_gpio,
 		.decoder      = EM28XX_TVP5150,
-		.input          = { {
+		.input        = { {
 			.type     = EM28XX_VMUX_TELEVISION,
 			.vmux     = TVP5150_COMPOSITE0,
 			.amux     = EM28XX_AMUX_VIDEO,
@@ -454,8 +519,7 @@ struct em28xx_board em28xx_boards[] = {
 	},
 	[EM2861_BOARD_YAKUMO_MOVIE_MIXER] = {
 		.name          = "Yakumo MovieMixer",
-		.valid       = EM28XX_BOARD_NOT_VALIDATED,
-		.vchannels     = 1,
+		.tuner_type   = TUNER_ABSENT,	/* Capture only device */
 		.decoder       = EM28XX_TVP5150,
 		.input         = { {
 			.type     = EM28XX_VMUX_TELEVISION,
@@ -474,11 +538,10 @@ struct em28xx_board em28xx_boards[] = {
 	[EM2861_BOARD_PLEXTOR_PX_TV100U] = {
 		.name         = "Plextor ConvertX PX-TV100U",
 		.valid        = EM28XX_BOARD_NOT_VALIDATED,
-		.vchannels    = 3,
 		.tuner_type   = TUNER_TNF_5335MF,
 		.tda9887_conf = TDA9887_PRESENT,
 		.decoder      = EM28XX_TVP5150,
-		.input          = { {
+		.input        = { {
 			.type     = EM28XX_VMUX_TELEVISION,
 			.vmux     = TVP5150_COMPOSITE0,
 			.amux     = EM28XX_AMUX_LINE_IN,
@@ -492,10 +555,18 @@ struct em28xx_board em28xx_boards[] = {
 			.amux     = EM28XX_AMUX_LINE_IN,
 		} },
 	},
+
+	/* Those boards with em2870 are DVB Only*/
+
 	[EM2870_BOARD_TERRATEC_XS] = {
 		.name         = "Terratec Cinergy T XS",
 		.valid        = EM28XX_BOARD_NOT_VALIDATED,
 		.tuner_type   = TUNER_XC2028,
+		.tuner_gpio   = default_tuner_gpio,
+#if 0 /* FIXME: add an entry at em28xx-dvb */
+		.has_dvb      = 1,
+		.dvb_gpio     = default_digital,
+#endif
 	},
 	[EM2870_BOARD_TERRATEC_XS_MT2060] = {
 		.name         = "Terratec Cinergy T XS (MT2060)",
@@ -506,172 +577,242 @@ struct em28xx_board em28xx_boards[] = {
 		.name         = "Kworld 350 U DVB-T",
 		.valid        = EM28XX_BOARD_NOT_VALIDATED,
 		.tuner_type   = TUNER_XC2028,
+		.tuner_gpio   = default_tuner_gpio,
+#if 0 /* FIXME: add an entry at em28xx-dvb */
+		.has_dvb      = 1,
+		.dvb_gpio     = default_digital,
+#endif
 	},
 	[EM2870_BOARD_KWORLD_355U] = {
 		.name         = "Kworld 355 U DVB-T",
 		.valid        = EM28XX_BOARD_NOT_VALIDATED,
+#if 0 /* FIXME: add an entry at em28xx-dvb */
+		.has_dvb      = 1,
+		.dvb_gpio     = em2870_kworld_355u_digital,
+#endif
 	},
 	[EM2870_BOARD_PINNACLE_PCTV_DVB] = {
 		.name         = "Pinnacle PCTV DVB-T",
 		.valid        = EM28XX_BOARD_NOT_VALIDATED,
 		.tuner_type   = TUNER_ABSENT, /* MT2060 */
+		/* djh - I have serious doubts this is right... */
+		.xclk         = EM28XX_XCLK_IR_RC5_MODE |
+				EM28XX_XCLK_FREQUENCY_10MHZ,
 	},
 	[EM2870_BOARD_COMPRO_VIDEOMATE] = {
 		.name         = "Compro, VideoMate U3",
 		.valid        = EM28XX_BOARD_NOT_VALIDATED,
 		.tuner_type   = TUNER_ABSENT, /* MT2060 */
 	},
+
 	[EM2880_BOARD_TERRATEC_HYBRID_XS_FR] = {
 		.name         = "Terratec Hybrid XS Secam",
 		.valid        = EM28XX_BOARD_NOT_VALIDATED,
-		.vchannels    = 3,
 		.has_msp34xx  = 1,
 		.tuner_type   = TUNER_XC2028,
+		.tuner_gpio   = default_tuner_gpio,
 		.decoder      = EM28XX_TVP5150,
-		.input          = { {
+#if 0 /* FIXME: add an entry at em28xx-dvb */
+		.has_dvb      = 1,
+		.dvb_gpio     = default_digital,
+#endif
+		.input        = { {
 			.type     = EM28XX_VMUX_TELEVISION,
 			.vmux     = TVP5150_COMPOSITE0,
 			.amux     = EM28XX_AMUX_VIDEO,
+			.gpio     = default_analog,
 		}, {
 			.type     = EM28XX_VMUX_COMPOSITE1,
 			.vmux     = TVP5150_COMPOSITE1,
 			.amux     = EM28XX_AMUX_LINE_IN,
+			.gpio     = default_analog,
 		}, {
 			.type     = EM28XX_VMUX_SVIDEO,
 			.vmux     = TVP5150_SVIDEO,
 			.amux     = EM28XX_AMUX_LINE_IN,
+			.gpio     = default_analog,
 		} },
 	},
 	[EM2880_BOARD_HAUPPAUGE_WINTV_HVR_900] = {
 		.name         = "Hauppauge WinTV HVR 900",
-		.vchannels    = 3,
 		.tda9887_conf = TDA9887_PRESENT,
 		.tuner_type   = TUNER_XC2028,
+		.tuner_gpio   = default_tuner_gpio,
 		.mts_firmware = 1,
-		.has_dvb        = 1,
+		.has_dvb      = 1,
+		.dvb_gpio     = hauppauge_wintv_hvr_900_digital,
 		.decoder      = EM28XX_TVP5150,
-		.input          = { {
+		.input        = { {
 			.type     = EM28XX_VMUX_TELEVISION,
 			.vmux     = TVP5150_COMPOSITE0,
 			.amux     = EM28XX_AMUX_VIDEO,
+			.gpio     = hauppauge_wintv_hvr_900_analog,
 		}, {
 			.type     = EM28XX_VMUX_COMPOSITE1,
 			.vmux     = TVP5150_COMPOSITE1,
 			.amux     = EM28XX_AMUX_LINE_IN,
+			.gpio     = hauppauge_wintv_hvr_900_analog,
 		}, {
 			.type     = EM28XX_VMUX_SVIDEO,
 			.vmux     = TVP5150_SVIDEO,
 			.amux     = EM28XX_AMUX_LINE_IN,
+			.gpio     = hauppauge_wintv_hvr_900_analog,
 		} },
 	},
 	[EM2880_BOARD_HAUPPAUGE_WINTV_HVR_900_R2] = {
 		.name         = "Hauppauge WinTV HVR 900 (R2)",
-		.vchannels    = 3,
 		.tda9887_conf = TDA9887_PRESENT,
 		.tuner_type   = TUNER_XC2028,
+		.tuner_gpio   = default_tuner_gpio,
 		.mts_firmware = 1,
 		.decoder      = EM28XX_TVP5150,
+#if 0 /* FIXME: add an entry at em28xx-dvb */
+		.has_dvb      = 1,
+		.dvb_gpio     = hauppauge_wintv_hvr_900_digital,
+#endif
+		.input        = { {
+			.type     = EM28XX_VMUX_TELEVISION,
+			.vmux     = TVP5150_COMPOSITE0,
+			.amux     = EM28XX_AMUX_VIDEO,
+			.gpio     = hauppauge_wintv_hvr_900_analog,
+		}, {
+			.type     = EM28XX_VMUX_COMPOSITE1,
+			.vmux     = TVP5150_COMPOSITE1,
+			.amux     = EM28XX_AMUX_LINE_IN,
+			.gpio     = hauppauge_wintv_hvr_900_analog,
+		}, {
+			.type     = EM28XX_VMUX_SVIDEO,
+			.vmux     = TVP5150_SVIDEO,
+			.amux     = EM28XX_AMUX_LINE_IN,
+			.gpio     = hauppauge_wintv_hvr_900_analog,
+		} },
+	},
+	[EM2883_BOARD_HAUPPAUGE_WINTV_HVR_850] = {
+		.name           = "Hauppauge WinTV HVR 850",
+		.tuner_type     = TUNER_XC2028,
+		.tuner_gpio     = default_tuner_gpio,
+		.mts_firmware   = 1,
+		.has_dvb        = 1,
+		.dvb_gpio       = hauppauge_wintv_hvr_900_digital,
+		.ir_codes       = ir_codes_hauppauge_new,
+		.decoder        = EM28XX_TVP5150,
 		.input          = { {
 			.type     = EM28XX_VMUX_TELEVISION,
 			.vmux     = TVP5150_COMPOSITE0,
 			.amux     = EM28XX_AMUX_VIDEO,
+			.gpio     = hauppauge_wintv_hvr_900_analog,
 		}, {
 			.type     = EM28XX_VMUX_COMPOSITE1,
 			.vmux     = TVP5150_COMPOSITE1,
-			.amux     = 3,
+			.amux     = EM28XX_AMUX_LINE_IN,
+			.gpio     = hauppauge_wintv_hvr_900_analog,
 		}, {
 			.type     = EM28XX_VMUX_SVIDEO,
 			.vmux     = TVP5150_SVIDEO,
 			.amux     = EM28XX_AMUX_LINE_IN,
+			.gpio     = hauppauge_wintv_hvr_900_analog,
 		} },
 	},
 	[EM2883_BOARD_HAUPPAUGE_WINTV_HVR_950] = {
 		.name           = "Hauppauge WinTV HVR 950",
-		.vchannels      = 3,
 		.tuner_type     = TUNER_XC2028,
+		.tuner_gpio     = default_tuner_gpio,
 		.mts_firmware   = 1,
-		.has_12mhz_i2s  = 1,
 		.has_dvb        = 1,
+		.dvb_gpio       = hauppauge_wintv_hvr_900_digital,
 		.ir_codes       = ir_codes_hauppauge_new,
 		.decoder        = EM28XX_TVP5150,
 		.input          = { {
 			.type     = EM28XX_VMUX_TELEVISION,
 			.vmux     = TVP5150_COMPOSITE0,
 			.amux     = EM28XX_AMUX_VIDEO,
+			.gpio     = hauppauge_wintv_hvr_900_analog,
 		}, {
 			.type     = EM28XX_VMUX_COMPOSITE1,
 			.vmux     = TVP5150_COMPOSITE1,
 			.amux     = EM28XX_AMUX_LINE_IN,
+			.gpio     = hauppauge_wintv_hvr_900_analog,
 		}, {
 			.type     = EM28XX_VMUX_SVIDEO,
 			.vmux     = TVP5150_SVIDEO,
 			.amux     = EM28XX_AMUX_LINE_IN,
+			.gpio     = hauppauge_wintv_hvr_900_analog,
 		} },
 	},
 	[EM2880_BOARD_PINNACLE_PCTV_HD_PRO] = {
 		.name           = "Pinnacle PCTV HD Pro Stick",
-		.vchannels      = 3,
 		.tuner_type     = TUNER_XC2028,
+		.tuner_gpio   = default_tuner_gpio,
 		.mts_firmware   = 1,
-		.has_12mhz_i2s  = 1,
 		.has_dvb        = 1,
+		.dvb_gpio       = hauppauge_wintv_hvr_900_digital,
 		.ir_codes       = ir_codes_pinnacle_pctv_hd,
 		.decoder        = EM28XX_TVP5150,
 		.input          = { {
 			.type     = EM28XX_VMUX_TELEVISION,
 			.vmux     = TVP5150_COMPOSITE0,
 			.amux     = EM28XX_AMUX_VIDEO,
+			.gpio     = hauppauge_wintv_hvr_900_analog,
 		}, {
 			.type     = EM28XX_VMUX_COMPOSITE1,
 			.vmux     = TVP5150_COMPOSITE1,
 			.amux     = EM28XX_AMUX_LINE_IN,
+			.gpio     = hauppauge_wintv_hvr_900_analog,
 		}, {
 			.type     = EM28XX_VMUX_SVIDEO,
 			.vmux     = TVP5150_SVIDEO,
 			.amux     = EM28XX_AMUX_LINE_IN,
+			.gpio     = hauppauge_wintv_hvr_900_analog,
 		} },
 	},
 	[EM2880_BOARD_AMD_ATI_TV_WONDER_HD_600] = {
 		.name           = "AMD ATI TV Wonder HD 600",
-		.vchannels      = 3,
 		.tuner_type     = TUNER_XC2028,
+		.tuner_gpio     = default_tuner_gpio,
 		.mts_firmware   = 1,
-		.has_12mhz_i2s  = 1,
 		.has_dvb        = 1,
+		.dvb_gpio       = hauppauge_wintv_hvr_900_digital,
 		.ir_codes       = ir_codes_ati_tv_wonder_hd_600,
 		.decoder        = EM28XX_TVP5150,
 		.input          = { {
 			.type     = EM28XX_VMUX_TELEVISION,
 			.vmux     = TVP5150_COMPOSITE0,
 			.amux     = EM28XX_AMUX_VIDEO,
+			.gpio     = hauppauge_wintv_hvr_900_analog,
 		}, {
 			.type     = EM28XX_VMUX_COMPOSITE1,
 			.vmux     = TVP5150_COMPOSITE1,
 			.amux     = EM28XX_AMUX_LINE_IN,
+			.gpio     = hauppauge_wintv_hvr_900_analog,
 		}, {
 			.type     = EM28XX_VMUX_SVIDEO,
 			.vmux     = TVP5150_SVIDEO,
 			.amux     = EM28XX_AMUX_LINE_IN,
+			.gpio     = hauppauge_wintv_hvr_900_analog,
 		} },
 	},
 	[EM2880_BOARD_TERRATEC_HYBRID_XS] = {
-		.name         = "Terratec Hybrid XS",
-		.vchannels    = 3,
-		.tuner_type   = TUNER_XC2028,
-		.decoder      = EM28XX_TVP5150,
+		.name           = "Terratec Hybrid XS",
+		.tuner_type     = TUNER_XC2028,
+		.tuner_gpio     = default_tuner_gpio,
+		.decoder        = EM28XX_TVP5150,
 		.has_dvb        = 1,
+		.dvb_gpio       = default_analog,
 		.input          = { {
 			.type     = EM28XX_VMUX_TELEVISION,
 			.vmux     = TVP5150_COMPOSITE0,
 			.amux     = EM28XX_AMUX_VIDEO,
+			.gpio     = default_analog,
 		}, {
 			.type     = EM28XX_VMUX_COMPOSITE1,
 			.vmux     = TVP5150_COMPOSITE1,
 			.amux     = EM28XX_AMUX_LINE_IN,
+			.gpio     = default_analog,
 		}, {
 			.type     = EM28XX_VMUX_SVIDEO,
 			.vmux     = TVP5150_SVIDEO,
 			.amux     = EM28XX_AMUX_LINE_IN,
+			.gpio     = default_analog,
 		} },
 	},
 	/* maybe there's a reason behind it why Terratec sells the Hybrid XS
@@ -679,33 +820,38 @@ struct em28xx_board em28xx_boards[] = {
 	   maybe we'll need it lateron */
 	[EM2880_BOARD_TERRATEC_PRODIGY_XS] = {
 		.name         = "Terratec Prodigy XS",
-		.vchannels    = 3,
 		.tuner_type   = TUNER_XC2028,
+		.tuner_gpio   = default_tuner_gpio,
 		.decoder      = EM28XX_TVP5150,
-		.input          = { {
+#if 0 /* FIXME: add an entry at em28xx-dvb */
+		.has_dvb      = 1,
+		.dvb_gpio     = hauppauge_wintv_hvr_900_digital,
+#endif
+		.input        = { {
 			.type     = EM28XX_VMUX_TELEVISION,
 			.vmux     = TVP5150_COMPOSITE0,
 			.amux     = EM28XX_AMUX_VIDEO,
+			.gpio     = hauppauge_wintv_hvr_900_analog,
 		}, {
 			.type     = EM28XX_VMUX_COMPOSITE1,
 			.vmux     = TVP5150_COMPOSITE1,
 			.amux     = EM28XX_AMUX_LINE_IN,
+			.gpio     = hauppauge_wintv_hvr_900_analog,
 		}, {
 			.type     = EM28XX_VMUX_SVIDEO,
 			.vmux     = TVP5150_SVIDEO,
 			.amux     = EM28XX_AMUX_LINE_IN,
+			.gpio     = hauppauge_wintv_hvr_900_analog,
 		} },
 	},
 	[EM2820_BOARD_MSI_VOX_USB_2] = {
 		.name		   = "MSI VOX USB 2.0",
-		.vchannels	   = 3,
 		.tuner_type	   = TUNER_LG_PAL_NEW_TAPC,
 		.tda9887_conf	   = TDA9887_PRESENT      |
 				     TDA9887_PORT1_ACTIVE |
 				     TDA9887_PORT2_ACTIVE,
 		.max_range_640_480 = 1,
-
-		.decoder           = EM28XX_SAA7114,
+		.decoder           = EM28XX_SAA711X,
 		.input             = { {
 			.type      = EM28XX_VMUX_TELEVISION,
 			.vmux      = SAA7115_COMPOSITE4,
@@ -723,11 +869,10 @@ struct em28xx_board em28xx_boards[] = {
 	[EM2800_BOARD_TERRATEC_CINERGY_200] = {
 		.name         = "Terratec Cinergy 200 USB",
 		.is_em2800    = 1,
-		.vchannels    = 3,
 		.tuner_type   = TUNER_LG_PAL_NEW_TAPC,
 		.tda9887_conf = TDA9887_PRESENT,
-		.decoder      = EM28XX_SAA7113,
-		.input          = { {
+		.decoder      = EM28XX_SAA711X,
+		.input        = { {
 			.type     = EM28XX_VMUX_TELEVISION,
 			.vmux     = SAA7115_COMPOSITE2,
 			.amux     = EM28XX_AMUX_VIDEO,
@@ -744,9 +889,9 @@ struct em28xx_board em28xx_boards[] = {
 	[EM2800_BOARD_GRABBEEX_USB2800] = {
 		.name         = "eMPIA Technology, Inc. GrabBeeX+ Video Encoder",
 		.is_em2800    = 1,
-		.vchannels    = 2,
-		.decoder      = EM28XX_SAA7113,
-		.input          = { {
+		.decoder      = EM28XX_SAA711X,
+		.tuner_type   = TUNER_ABSENT, /* capture only board */
+		.input        = { {
 			.type     = EM28XX_VMUX_COMPOSITE1,
 			.vmux     = SAA7115_COMPOSITE0,
 			.amux     = EM28XX_AMUX_LINE_IN,
@@ -759,11 +904,10 @@ struct em28xx_board em28xx_boards[] = {
 	[EM2800_BOARD_LEADTEK_WINFAST_USBII] = {
 		.name         = "Leadtek Winfast USB II",
 		.is_em2800    = 1,
-		.vchannels    = 3,
 		.tuner_type   = TUNER_LG_PAL_NEW_TAPC,
 		.tda9887_conf = TDA9887_PRESENT,
-		.decoder      = EM28XX_SAA7113,
-		.input          = { {
+		.decoder      = EM28XX_SAA711X,
+		.input        = { {
 			.type     = EM28XX_VMUX_TELEVISION,
 			.vmux     = SAA7115_COMPOSITE2,
 			.amux     = EM28XX_AMUX_VIDEO,
@@ -780,11 +924,10 @@ struct em28xx_board em28xx_boards[] = {
 	[EM2800_BOARD_KWORLD_USB2800] = {
 		.name         = "Kworld USB2800",
 		.is_em2800    = 1,
-		.vchannels    = 3,
 		.tuner_type   = TUNER_PHILIPS_FCV1236D,
 		.tda9887_conf = TDA9887_PRESENT,
-		.decoder      = EM28XX_SAA7113,
-		.input          = { {
+		.decoder      = EM28XX_SAA711X,
+		.input        = { {
 			.type     = EM28XX_VMUX_TELEVISION,
 			.vmux     = SAA7115_COMPOSITE2,
 			.amux     = EM28XX_AMUX_VIDEO,
@@ -800,10 +943,9 @@ struct em28xx_board em28xx_boards[] = {
 	},
 	[EM2820_BOARD_PINNACLE_DVC_90] = {
 		.name         = "Pinnacle Dazzle DVC 90/DVC 100",
-		.vchannels    = 3,
-		.tuner_type   = TUNER_ABSENT,
-		.decoder      = EM28XX_SAA7113,
-		.input          = { {
+		.tuner_type   = TUNER_ABSENT, /* capture only board */
+		.decoder      = EM28XX_SAA711X,
+		.input        = { {
 			.type     = EM28XX_VMUX_COMPOSITE1,
 			.vmux     = SAA7115_COMPOSITE0,
 			.amux     = EM28XX_AMUX_LINE_IN,
@@ -816,11 +958,10 @@ struct em28xx_board em28xx_boards[] = {
 	[EM2800_BOARD_VGEAR_POCKETTV] = {
 		.name         = "V-Gear PocketTV",
 		.is_em2800    = 1,
-		.vchannels    = 3,
 		.tuner_type   = TUNER_LG_PAL_NEW_TAPC,
 		.tda9887_conf = TDA9887_PRESENT,
-		.decoder      = EM28XX_SAA7113,
-		.input          = { {
+		.decoder      = EM28XX_SAA711X,
+		.input        = { {
 			.type     = EM28XX_VMUX_TELEVISION,
 			.vmux     = SAA7115_COMPOSITE2,
 			.amux     = EM28XX_AMUX_VIDEO,
@@ -836,11 +977,10 @@ struct em28xx_board em28xx_boards[] = {
 	},
 	[EM2820_BOARD_PROLINK_PLAYTV_USB2] = {
 		.name         = "Pixelview Prolink PlayTV USB 2.0",
-		.vchannels    = 3,
 		.tda9887_conf = TDA9887_PRESENT,
 		.tuner_type   = TUNER_YMEC_TVF_5533MF,
-		.decoder      = EM28XX_SAA7113,
-		.input          = { {
+		.decoder      = EM28XX_SAA711X,
+		.input        = { {
 			.type     = EM28XX_VMUX_TELEVISION,
 			.vmux     = SAA7115_COMPOSITE2,
 			.amux     = EM28XX_AMUX_VIDEO,
@@ -857,13 +997,12 @@ struct em28xx_board em28xx_boards[] = {
 		} },
 	},
 	[EM2860_BOARD_POINTNIX_INTRAORAL_CAMERA] = {
-		.name         = "PointNix Intra-Oral Camera",
+		.name                = "PointNix Intra-Oral Camera",
 		.has_snapshot_button = 1,
-		.vchannels    = 1,
-		.tda9887_conf = TDA9887_PRESENT,
-		.tuner_type   = TUNER_ABSENT,
-		.decoder      = EM28XX_SAA7113,
-		.input          = { {
+		.tda9887_conf        = TDA9887_PRESENT,
+		.tuner_type          = TUNER_ABSENT,
+		.decoder             = EM28XX_SAA711X,
+		.input               = { {
 			.type     = EM28XX_VMUX_SVIDEO,
 			.vmux     = SAA7115_SVIDEO3,
 			.amux     = EM28XX_AMUX_VIDEO,
@@ -872,50 +1011,64 @@ struct em28xx_board em28xx_boards[] = {
 	[EM2880_BOARD_MSI_DIGIVOX_AD] = {
 		.name         = "MSI DigiVox A/D",
 		.valid        = EM28XX_BOARD_NOT_VALIDATED,
-		.vchannels    = 3,
 		.tuner_type   = TUNER_XC2028,
+		.tuner_gpio   = default_tuner_gpio,
 		.decoder      = EM28XX_TVP5150,
-		.input          = { {
+#if 0 /* FIXME: add an entry at em28xx-dvb */
+		.has_dvb      = 1,
+		.dvb_gpio     = em2880_msi_digivox_ad_digital,
+#endif
+		.input        = { {
 			.type     = EM28XX_VMUX_TELEVISION,
 			.vmux     = TVP5150_COMPOSITE0,
 			.amux     = EM28XX_AMUX_VIDEO,
+			.gpio     = em2880_msi_digivox_ad_analog,
 		}, {
 			.type     = EM28XX_VMUX_COMPOSITE1,
 			.vmux     = TVP5150_COMPOSITE1,
 			.amux     = EM28XX_AMUX_LINE_IN,
+			.gpio     = em2880_msi_digivox_ad_analog,
 		}, {
 			.type     = EM28XX_VMUX_SVIDEO,
 			.vmux     = TVP5150_SVIDEO,
 			.amux     = EM28XX_AMUX_LINE_IN,
+			.gpio     = em2880_msi_digivox_ad_analog,
 		} },
 	},
 	[EM2880_BOARD_MSI_DIGIVOX_AD_II] = {
 		.name         = "MSI DigiVox A/D II",
 		.valid        = EM28XX_BOARD_NOT_VALIDATED,
-		.vchannels    = 3,
 		.tuner_type   = TUNER_XC2028,
+		.tuner_gpio   = default_tuner_gpio,
 		.decoder      = EM28XX_TVP5150,
-		.input          = { {
+#if 0 /* FIXME: add an entry at em28xx-dvb */
+		.has_dvb      = 1,
+		.dvb_gpio     = em2880_msi_digivox_ad_digital,
+#endif
+		.input        = { {
 			.type     = EM28XX_VMUX_TELEVISION,
 			.vmux     = TVP5150_COMPOSITE0,
 			.amux     = EM28XX_AMUX_VIDEO,
+			.gpio     = em2880_msi_digivox_ad_analog,
 		}, {
 			.type     = EM28XX_VMUX_COMPOSITE1,
 			.vmux     = TVP5150_COMPOSITE1,
 			.amux     = EM28XX_AMUX_LINE_IN,
+			.gpio     = em2880_msi_digivox_ad_analog,
 		}, {
 			.type     = EM28XX_VMUX_SVIDEO,
 			.vmux     = TVP5150_SVIDEO,
 			.amux     = EM28XX_AMUX_LINE_IN,
+			.gpio     = em2880_msi_digivox_ad_analog,
 		} },
 	},
 	[EM2880_BOARD_KWORLD_DVB_305U] = {
 		.name	      = "KWorld DVB-T 305U",
 		.valid        = EM28XX_BOARD_NOT_VALIDATED,
-		.vchannels    = 3,
 		.tuner_type   = TUNER_XC2028,
+		.tuner_gpio   = default_tuner_gpio,
 		.decoder      = EM28XX_TVP5150,
-		.input          = { {
+		.input        = { {
 			.type     = EM28XX_VMUX_TELEVISION,
 			.vmux     = TVP5150_COMPOSITE0,
 			.amux     = EM28XX_AMUX_VIDEO,
@@ -931,93 +1084,118 @@ struct em28xx_board em28xx_boards[] = {
 	},
 	[EM2880_BOARD_KWORLD_DVB_310U] = {
 		.name	      = "KWorld DVB-T 310U",
-		.vchannels    = 3,
 		.tuner_type   = TUNER_XC2028,
+		.tuner_gpio   = default_tuner_gpio,
 		.has_dvb      = 1,
+		.dvb_gpio     = default_digital,
 		.mts_firmware = 1,
 		.decoder      = EM28XX_TVP5150,
-		.input          = { {
+		.input        = { {
 			.type     = EM28XX_VMUX_TELEVISION,
 			.vmux     = TVP5150_COMPOSITE0,
 			.amux     = EM28XX_AMUX_VIDEO,
+			.gpio     = default_analog,
 		}, {
 			.type     = EM28XX_VMUX_COMPOSITE1,
 			.vmux     = TVP5150_COMPOSITE1,
 			.amux     = EM28XX_AMUX_LINE_IN,
+			.gpio     = default_analog,
 		}, {	/* S-video has not been tested yet */
 			.type     = EM28XX_VMUX_SVIDEO,
 			.vmux     = TVP5150_SVIDEO,
 			.amux     = EM28XX_AMUX_LINE_IN,
+			.gpio     = default_analog,
 		} },
 	},
 	[EM2881_BOARD_DNT_DA2_HYBRID] = {
 		.name         = "DNT DA2 Hybrid",
 		.valid        = EM28XX_BOARD_NOT_VALIDATED,
-		.vchannels    = 3,
 		.tuner_type   = TUNER_XC2028,
+		.tuner_gpio   = default_tuner_gpio,
 		.decoder      = EM28XX_TVP5150,
-		.input          = { {
+#if 0 /* FIXME: add an entry at em28xx-dvb */
+		.has_dvb      = 1,
+		.dvb_gpio     = default_digital,
+#endif
+		.input        = { {
 			.type     = EM28XX_VMUX_TELEVISION,
 			.vmux     = TVP5150_COMPOSITE0,
 			.amux     = EM28XX_AMUX_VIDEO,
+			.gpio     = default_analog,
 		}, {
 			.type     = EM28XX_VMUX_COMPOSITE1,
 			.vmux     = TVP5150_COMPOSITE1,
 			.amux     = EM28XX_AMUX_LINE_IN,
+			.gpio     = default_analog,
 		}, {
 			.type     = EM28XX_VMUX_SVIDEO,
 			.vmux     = TVP5150_SVIDEO,
 			.amux     = EM28XX_AMUX_LINE_IN,
+			.gpio     = default_analog,
 		} },
 	},
 	[EM2881_BOARD_PINNACLE_HYBRID_PRO] = {
 		.name         = "Pinnacle Hybrid Pro",
 		.valid        = EM28XX_BOARD_NOT_VALIDATED,
-		.vchannels    = 3,
 		.tuner_type   = TUNER_XC2028,
+		.tuner_gpio   = default_tuner_gpio,
 		.decoder      = EM28XX_TVP5150,
-		.input          = { {
+#if 0 /* FIXME: add an entry at em28xx-dvb */
+		.has_dvb      = 1,
+		.dvb_gpio     = default_digital,
+#endif
+		.input        = { {
 			.type     = EM28XX_VMUX_TELEVISION,
 			.vmux     = TVP5150_COMPOSITE0,
 			.amux     = EM28XX_AMUX_VIDEO,
+			.gpio     = default_analog,
 		}, {
 			.type     = EM28XX_VMUX_COMPOSITE1,
 			.vmux     = TVP5150_COMPOSITE1,
 			.amux     = EM28XX_AMUX_LINE_IN,
+			.gpio     = default_analog,
 		}, {
 			.type     = EM28XX_VMUX_SVIDEO,
 			.vmux     = TVP5150_SVIDEO,
 			.amux     = EM28XX_AMUX_LINE_IN,
+			.gpio     = default_analog,
 		} },
 	},
 	[EM2882_BOARD_PINNACLE_HYBRID_PRO] = {
 		.name         = "Pinnacle Hybrid Pro (2)",
 		.valid        = EM28XX_BOARD_NOT_VALIDATED,
-		.vchannels    = 3,
 		.tuner_type   = TUNER_XC2028,
+		.tuner_gpio   = default_tuner_gpio,
 		.mts_firmware = 1,
 		.decoder      = EM28XX_TVP5150,
-		.input          = { {
+#if 0 /* FIXME: add an entry at em28xx-dvb */
+		.has_dvb      = 1,
+		.dvb_gpio     = hauppauge_wintv_hvr_900_digital,
+#endif
+		.input        = { {
 			.type     = EM28XX_VMUX_TELEVISION,
 			.vmux     = TVP5150_COMPOSITE0,
 			.amux     = EM28XX_AMUX_VIDEO,
+			.gpio     = hauppauge_wintv_hvr_900_analog,
 		}, {
 			.type     = EM28XX_VMUX_COMPOSITE1,
 			.vmux     = TVP5150_COMPOSITE1,
 			.amux     = EM28XX_AMUX_LINE_IN,
+			.gpio     = hauppauge_wintv_hvr_900_analog,
 		}, {
 			.type     = EM28XX_VMUX_SVIDEO,
 			.vmux     = TVP5150_SVIDEO,
 			.amux     = EM28XX_AMUX_LINE_IN,
+			.gpio     = hauppauge_wintv_hvr_900_analog,
 		} },
 	},
 	[EM2882_BOARD_KWORLD_VS_DVBT] = {
 		.name         = "Kworld VS-DVB-T 323UR",
 		.valid        = EM28XX_BOARD_NOT_VALIDATED,
-		.vchannels    = 3,
 		.tuner_type   = TUNER_XC2028,
+		.tuner_gpio   = default_tuner_gpio,
 		.decoder      = EM28XX_TVP5150,
-		.input          = { {
+		.input        = { {
 			.type     = EM28XX_VMUX_TELEVISION,
 			.vmux     = TVP5150_COMPOSITE0,
 			.amux     = EM28XX_AMUX_VIDEO,
@@ -1034,51 +1212,61 @@ struct em28xx_board em28xx_boards[] = {
 	[EM2882_BOARD_TERRATEC_HYBRID_XS] = {
 		.name         = "Terratec Hybrid XS (em2882)",
 		.valid        = EM28XX_BOARD_NOT_VALIDATED,
-		.vchannels    = 3,
 		.tuner_type   = TUNER_XC2028,
+		.tuner_gpio   = default_tuner_gpio,
 		.decoder      = EM28XX_TVP5150,
-		.input          = { {
+#if 0 /* FIXME: add an entry at em28xx-dvb */
+		.has_dvb      = 1,
+		.dvb_gpio     = hauppauge_wintv_hvr_900_digital,
+#endif
+		.input        = { {
 			.type     = EM28XX_VMUX_TELEVISION,
 			.vmux     = TVP5150_COMPOSITE0,
 			.amux     = EM28XX_AMUX_VIDEO,
+			.gpio     = hauppauge_wintv_hvr_900_analog,
 		}, {
 			.type     = EM28XX_VMUX_COMPOSITE1,
 			.vmux     = TVP5150_COMPOSITE1,
 			.amux     = EM28XX_AMUX_LINE_IN,
+			.gpio     = hauppauge_wintv_hvr_900_analog,
 		}, {
 			.type     = EM28XX_VMUX_SVIDEO,
 			.vmux     = TVP5150_SVIDEO,
 			.amux     = EM28XX_AMUX_LINE_IN,
+			.gpio     = hauppauge_wintv_hvr_900_analog,
 		} },
 	},
 	[EM2883_BOARD_KWORLD_HYBRID_A316] = {
 		.name         = "Kworld PlusTV HD Hybrid 330",
-		.valid        = EM28XX_BOARD_NOT_VALIDATED,
-		.vchannels    = 3,
-		.is_em2800    = 0,
 		.tuner_type   = TUNER_XC2028,
+		.tuner_gpio   = default_tuner_gpio,
 		.decoder      = EM28XX_TVP5150,
-		.input          = { {
+		.mts_firmware = 1,
+		.has_dvb      = 1,
+		.dvb_gpio     = default_digital,
+		.input        = { {
 			.type     = EM28XX_VMUX_TELEVISION,
 			.vmux     = TVP5150_COMPOSITE0,
 			.amux     = EM28XX_AMUX_VIDEO,
+			.gpio     = default_analog,
 		}, {
 			.type     = EM28XX_VMUX_COMPOSITE1,
 			.vmux     = TVP5150_COMPOSITE1,
 			.amux     = EM28XX_AMUX_LINE_IN,
+			.gpio     = hauppauge_wintv_hvr_900_analog,
 		}, {
 			.type     = EM28XX_VMUX_SVIDEO,
 			.vmux     = TVP5150_SVIDEO,
 			.amux     = EM28XX_AMUX_LINE_IN,
+			.gpio     = hauppauge_wintv_hvr_900_analog,
 		} },
 	},
 	[EM2820_BOARD_COMPRO_VIDEOMATE_FORYOU] = {
 		.name         = "Compro VideoMate ForYou/Stereo",
-		.vchannels    = 2,
 		.tuner_type   = TUNER_LG_PAL_NEW_TAPC,
 		.tda9887_conf = TDA9887_PRESENT,
 		.decoder      = EM28XX_TVP5150,
-		.input          = { {
+		.input        = { {
 			.type     = EM28XX_VMUX_TELEVISION,
 			.vmux     = TVP5150_COMPOSITE0,
 			.amux     = EM28XX_AMUX_LINE_IN,
@@ -1088,15 +1276,21 @@ struct em28xx_board em28xx_boards[] = {
 			.amux     = EM28XX_AMUX_LINE_IN,
 		} },
 	},
+
+	/* em2874 tuners are DVB only */
+
 	[EM2874_BOARD_PINNACLE_PCTV_80E] = {
 		.name         = "Pinnacle PCTV HD Mini",
-		.vchannels    = 0,
 		.tuner_type   = TUNER_ABSENT,
-		.has_dvb        = 1,
-		.ir_codes       = ir_codes_pinnacle_pctv_hd,
+		.has_dvb      = 1,
+		.dvb_gpio     = em2874_pinnacle_80e_digital,
+		.ir_codes     = ir_codes_pinnacle_pctv_hd,
 		.decoder      = EM28XX_NODECODER,
+		.i2c_speed    = EM28XX_I2C_CLK_WAIT_ENABLE |
+				EM2874_I2C_SECONDARY_BUS_SELECT |
+				EM28XX_I2C_FREQ_400_KHZ,
 #ifdef DJH_DEBUG
-		.input          = { {
+		.input        = { {
 			.type     = EM28XX_VMUX_TELEVISION,
 			.vmux     = TVP5150_COMPOSITE0,
 			.amux     = EM28XX_AMUX_LINE_IN,
@@ -1184,8 +1378,8 @@ struct usb_device_id em28xx_id_table [] = {
 			.driver_info = EM2883_BOARD_HAUPPAUGE_WINTV_HVR_950 },
 	{ USB_DEVICE(0x2040, 0x651b), /* RP  HVR-950 */
 			.driver_info = EM2883_BOARD_HAUPPAUGE_WINTV_HVR_950 },
-	{ USB_DEVICE(0x2040, 0x651f), /* HCW HVR-850 */
-			.driver_info = EM2883_BOARD_HAUPPAUGE_WINTV_HVR_950 },
+	{ USB_DEVICE(0x2040, 0x651f),
+			.driver_info = EM2883_BOARD_HAUPPAUGE_WINTV_HVR_850 },
 	{ USB_DEVICE(0x0438, 0xb002),
 			.driver_info = EM2880_BOARD_AMD_ATI_TV_WONDER_HD_600 },
 	{ USB_DEVICE(0x2001, 0xf112),
@@ -1211,84 +1405,6 @@ struct usb_device_id em28xx_id_table [] = {
 MODULE_DEVICE_TABLE(usb, em28xx_id_table);
 
 /*
- *  Reset sequences for analog/digital modes
- */
-
-/* Reset for the most [analog] boards */
-static struct em28xx_reg_seq default_analog[] = {
-	{EM28XX_R08_GPIO,	0x6d,   ~EM_GPIO_4,	10},
-	{	-1,		-1,	-1,		-1},
-};
-
-/* Reset for the most [digital] boards */
-static struct em28xx_reg_seq default_digital[] = {
-	{EM28XX_R08_GPIO,	0x6e,	~EM_GPIO_4,	10},
-	{	-1,		-1,	-1,		-1},
-};
-
-/* Board Hauppauge WinTV HVR 900 analog */
-static struct em28xx_reg_seq hauppauge_wintv_hvr_900_analog[] = {
-	{EM28XX_R08_GPIO,	0x2d,	~EM_GPIO_4,	10},
-	{0x05,			0xff,	0x10,		10},
-	{  -1,			-1,	-1,		-1},
-};
-
-/* Board Hauppauge WinTV HVR 900 digital */
-static struct em28xx_reg_seq hauppauge_wintv_hvr_900_digital[] = {
-	{EM28XX_R08_GPIO,	0x2e,	~EM_GPIO_4,	10},
-	{EM2880_R04_GPO,	0x04,	0x0f,		10},
-	{EM2880_R04_GPO,	0x0c,	0x0f,		10},
-	{ -1,			-1,	-1,		-1},
-};
-
-/* Boards - EM2880 MSI DIGIVOX AD and EM2880_BOARD_MSI_DIGIVOX_AD_II */
-static struct em28xx_reg_seq em2880_msi_digivox_ad_analog[] = {
-	{EM28XX_R08_GPIO,       0x69,   ~EM_GPIO_4,	 10},
-	{	-1,		-1,	-1,		 -1},
-};
-
-/* Boards - EM2880 MSI DIGIVOX AD and EM2880_BOARD_MSI_DIGIVOX_AD_II */
-static struct em28xx_reg_seq em2880_msi_digivox_ad_digital[] = {
-	{EM28XX_R08_GPIO,	0x6a,	~EM_GPIO_4,	10},
-	{	-1,		-1,	-1,		-1},
-};
-
-/* Board  - EM2870 Kworld 355u
-   Analog - No input analog */
-static struct em28xx_reg_seq em2870_kworld_355u_digital[] = {
-	{EM2880_R04_GPO,	0x01,	0xff,		10},
-	{  -1,			-1,	-1,		-1},
-};
-
-/* Callback for the most boards */
-static struct em28xx_reg_seq default_callback[] = {
-	{EM28XX_R08_GPIO,	EM_GPIO_4,	EM_GPIO_4,	10},
-	{EM28XX_R08_GPIO,	0,		EM_GPIO_4,	10},
-	{EM28XX_R08_GPIO,	EM_GPIO_4,	EM_GPIO_4,	10},
-	{  -1,			-1,		-1,		-1},
-};
-
-/* Callback for EM2882 TERRATEC HYBRID XS */
-static struct em28xx_reg_seq em2882_terratec_hybrid_xs_digital[] = {
-	{EM28XX_R08_GPIO,       0x2e,   0xff,		   6},
-	{EM28XX_R08_GPIO,       0x3e,   ~EM_GPIO_4,	   6},
-	{EM2880_R04_GPO,        0x04,   0xff,		  10},
-	{EM2880_R04_GPO,        0x0c,   0xff,		  10},
-	{  -1,			-1,	-1,		  -1},
-};
-
-/* Pinnacle PCTV HD Mini (80e) GPIOs
-   0-5: not used
-   6:   demod reset, active low
-   7:   LED on, active high */
-static struct em28xx_reg_seq em2874_pinnacle_80e_digital[] = {
-	{EM28XX_R06_I2C_CLK,    0x45,   0xff,		  10}, /*400 KHz*/
-	{EM2874_R80_GPIO,       0x80,   0xff,		  100},/*Demod reset*/
-	{EM2874_R80_GPIO,       0xc0,   0xff,		  10},
-	{  -1,			-1,	-1,		  -1},
-};
-
-/*
  * EEPROM hash table for devices with generic USB IDs
  */
 static struct em28xx_hash_table em28xx_eeprom_hash [] = {
@@ -1315,28 +1431,15 @@ int em28xx_tuner_callback(void *ptr, int component, int command, int arg)
 	if (command != XC2028_TUNER_RESET)
 		return 0;
 
-	if (dev->mode == EM28XX_ANALOG_MODE)
-		rc = em28xx_gpio_set(dev, dev->tun_analog_gpio);
-	else
-		rc = em28xx_gpio_set(dev, dev->tun_digital_gpio);
+	rc = em28xx_gpio_set(dev, dev->board.tuner_gpio);
 
 	return rc;
 }
 EXPORT_SYMBOL_GPL(em28xx_tuner_callback);
 
-static void em28xx_set_model(struct em28xx *dev)
+static void inline em28xx_set_model(struct em28xx *dev)
 {
-	dev->is_em2800 = em28xx_boards[dev->model].is_em2800;
-	dev->has_msp34xx = em28xx_boards[dev->model].has_msp34xx;
-	dev->tda9887_conf = em28xx_boards[dev->model].tda9887_conf;
-	dev->decoder = em28xx_boards[dev->model].decoder;
-	dev->video_inputs = em28xx_boards[dev->model].vchannels;
-	dev->has_12mhz_i2s = em28xx_boards[dev->model].has_12mhz_i2s;
-	dev->max_range_640_480 = em28xx_boards[dev->model].max_range_640_480;
-	dev->has_dvb = em28xx_boards[dev->model].has_dvb;
-	dev->has_snapshot_button = em28xx_boards[dev->model].has_snapshot_button;
-	dev->ir_codes = em28xx_boards[dev->model].ir_codes;
-	dev->valid = em28xx_boards[dev->model].valid;
+	memcpy(&dev->board, &em28xx_boards[dev->model], sizeof(dev->board));
 }
 
 /* Since em28xx_pre_card_setup() requires a proper dev->model,
@@ -1346,6 +1449,11 @@ void em28xx_pre_card_setup(struct em28xx *dev)
 {
 	int rc;
 
+	em28xx_set_model(dev);
+
+	em28xx_info("Identified as %s (card=%d)\n",
+		    dev->board.name, dev->model);
+
 	/* Set the default GPO/GPIO for legacy devices */
 	dev->reg_gpo_num = EM2880_R04_GPO;
 	dev->reg_gpio_num = EM28XX_R08_GPIO;
@@ -1356,7 +1464,8 @@ void em28xx_pre_card_setup(struct em28xx *dev)
 	rc = em28xx_read_reg(dev, EM28XX_R0A_CHIPID);
 	if (rc > 0) {
 		dev->chip_id = rc;
-		switch (rc) {
+
+		switch (dev->chip_id) {
 		case CHIP_ID_EM2750:
 			em28xx_info("chip ID is em2750\n");
 			break;
@@ -1379,7 +1488,7 @@ void em28xx_pre_card_setup(struct em28xx *dev)
 			dev->wait_after_write = 0;
 			break;
 		default:
-			em28xx_info("em28xx chip ID = %d\n", rc);
+			em28xx_info("em28xx chip ID = %d\n", dev->chip_id);
 		}
 	}
 
@@ -1388,223 +1497,83 @@ void em28xx_pre_card_setup(struct em28xx *dev)
 	if (rc >= 0)
 		dev->reg_gpo = rc;
 
-	em28xx_set_model(dev);
-
-	/* request some modules */
-	switch (dev->model) {
-	case EM2880_BOARD_TERRATEC_PRODIGY_XS:
-	case EM2880_BOARD_HAUPPAUGE_WINTV_HVR_900:
-	case EM2880_BOARD_HAUPPAUGE_WINTV_HVR_900_R2:
-	case EM2860_BOARD_TERRATEC_HYBRID_XS:
-	case EM2883_BOARD_HAUPPAUGE_WINTV_HVR_950:
-	case EM2880_BOARD_PINNACLE_PCTV_HD_PRO:
-	case EM2882_BOARD_PINNACLE_HYBRID_PRO:
-	case EM2883_BOARD_KWORLD_HYBRID_A316:
-	case EM2880_BOARD_AMD_ATI_TV_WONDER_HD_600:
-		em28xx_write_regs(dev, EM28XX_R0F_XCLK,    "\x27", 1);
-		em28xx_write_reg(dev, EM28XX_R06_I2C_CLK,
-				 EM28XX_I2C_CLK_WAIT_ENABLE |
-				 EM28XX_I2C_FREQ_100_KHZ);
-		msleep(50);
-
-		/* Sets GPO/GPIO sequences for this device */
-		dev->analog_gpio      = hauppauge_wintv_hvr_900_analog;
-		dev->digital_gpio     = hauppauge_wintv_hvr_900_digital;
-		dev->tun_analog_gpio  = default_callback;
-		dev->tun_digital_gpio = default_callback;
-		break;
-
-	case EM2882_BOARD_TERRATEC_HYBRID_XS:
-		em28xx_write_regs(dev, EM28XX_R0F_XCLK,    "\x27", 1);
-		em28xx_write_reg(dev, EM28XX_R06_I2C_CLK,
-				 EM28XX_I2C_CLK_WAIT_ENABLE |
-				 EM28XX_I2C_FREQ_100_KHZ);
-		msleep(50);
-
-		/* should be added ir_codes here */
-
-		/* Sets GPO/GPIO sequences for this device */
-		dev->analog_gpio      = hauppauge_wintv_hvr_900_analog;
-		dev->digital_gpio     = hauppauge_wintv_hvr_900_digital;
-		dev->tun_analog_gpio  = default_callback;
-		dev->tun_digital_gpio = em2882_terratec_hybrid_xs_digital;
-		break;
-
-	case EM2880_BOARD_TERRATEC_HYBRID_XS_FR:
-	case EM2880_BOARD_TERRATEC_HYBRID_XS:
-	case EM2870_BOARD_TERRATEC_XS:
-	case EM2881_BOARD_PINNACLE_HYBRID_PRO:
-	case EM2880_BOARD_KWORLD_DVB_310U:
-	case EM2870_BOARD_KWORLD_350U:
-	case EM2881_BOARD_DNT_DA2_HYBRID:
-		em28xx_write_regs(dev, EM28XX_R0F_XCLK,    "\x27", 1);
-		em28xx_write_reg(dev, EM28XX_R06_I2C_CLK,
-				 EM28XX_I2C_CLK_WAIT_ENABLE |
-				 EM28XX_I2C_FREQ_100_KHZ);
-		msleep(50);
-
-		/* NOTE: EM2881_DNT_DA2_HYBRID spend 140 msleep for digital
-			 and analog commands. If this commands doesn't work,
-			 add this timer. */
-
-		/* Sets GPO/GPIO sequences for this device */
-		dev->analog_gpio      = default_analog;
-		dev->digital_gpio     = default_digital;
-		dev->tun_analog_gpio  = default_callback;
-		dev->tun_digital_gpio = default_callback;
-		break;
+	/* Those are the default values for the majority of boards
+	   Use those values if not specified otherwise at boards entry
+	 */
+	if (!dev->board.xclk)
+		dev->board.xclk = EM28XX_XCLK_IR_RC5_MODE |
+				  EM28XX_XCLK_FREQUENCY_12MHZ;
 
-	case EM2880_BOARD_MSI_DIGIVOX_AD:
-	case EM2880_BOARD_MSI_DIGIVOX_AD_II:
-		em28xx_write_regs(dev, EM28XX_R0F_XCLK,    "\x27", 1);
-		em28xx_write_reg(dev, EM28XX_R06_I2C_CLK,
-				 EM28XX_I2C_CLK_WAIT_ENABLE |
-				 EM28XX_I2C_FREQ_100_KHZ);
-		msleep(50);
-
-		/* Sets GPO/GPIO sequences for this device */
-		dev->analog_gpio      = em2880_msi_digivox_ad_analog;
-		dev->digital_gpio     = em2880_msi_digivox_ad_digital;
-		dev->tun_analog_gpio  = default_callback;
-		dev->tun_digital_gpio = default_callback;
-		break;
+	if (!dev->board.i2c_speed)
+		dev->board.i2c_speed = EM28XX_I2C_CLK_WAIT_ENABLE |
+				       EM28XX_I2C_FREQ_100_KHZ;
 
-	case EM2750_BOARD_UNKNOWN:
-	case EM2750_BOARD_DLCW_130:
-		em28xx_write_regs(dev, EM28XX_R0F_XCLK, "\x0a", 1);
-		break;
+	em28xx_write_reg(dev, EM28XX_R0F_XCLK, dev->board.xclk & 0x7f);
+	em28xx_write_reg(dev, EM28XX_R06_I2C_CLK, dev->board.i2c_speed);
+	msleep(50);
 
+	/* request some modules */
+	switch (dev->model) {
 	case EM2861_BOARD_PLEXTOR_PX_TV100U:
-		em28xx_write_regs(dev, EM28XX_R0F_XCLK, "\x27", 1);
-		em28xx_write_reg(dev, EM28XX_R06_I2C_CLK,
-				 EM28XX_I2C_CLK_WAIT_ENABLE |
-				 EM28XX_I2C_FREQ_100_KHZ);
 		/* FIXME guess */
 		/* Turn on analog audio output */
-		em28xx_write_regs_req(dev, 0x00, 0x08, "\xfd", 1);
+		em28xx_write_reg(dev, EM28XX_R08_GPIO, 0xfd);
 		break;
-
 	case EM2861_BOARD_KWORLD_PVRTV_300U:
 	case EM2880_BOARD_KWORLD_DVB_305U:
-		em28xx_write_regs(dev, EM28XX_R0F_XCLK, "\x27", 1);
-		em28xx_write_reg(dev, EM28XX_R06_I2C_CLK,
-				 EM28XX_I2C_CLK_WAIT_ENABLE |
-				 EM28XX_I2C_FREQ_100_KHZ);
+		em28xx_write_reg(dev, EM28XX_R08_GPIO, 0x6d);
 		msleep(10);
-		em28xx_write_regs(dev, 0x08, "\x6d", 1);
-		msleep(10);
-		em28xx_write_regs(dev, 0x08, "\x7d", 1);
+		em28xx_write_reg(dev, EM28XX_R08_GPIO, 0x7d);
 		msleep(10);
 		break;
-
-	case EM2870_BOARD_KWORLD_355U:
-		em28xx_write_regs(dev, EM28XX_R0F_XCLK, "\x27", 1);
-		em28xx_write_reg(dev, EM28XX_R06_I2C_CLK,
-				 EM28XX_I2C_CLK_WAIT_ENABLE |
-				 EM28XX_I2C_FREQ_100_KHZ);
-		msleep(50);
-
-		/* Sets GPO/GPIO sequences for this device */
-		dev->digital_gpio     = em2870_kworld_355u_digital;
-		break;
-
 	case EM2870_BOARD_COMPRO_VIDEOMATE:
-		em28xx_write_regs(dev, EM28XX_R0F_XCLK, "\x27", 1);
-		em28xx_write_reg(dev, EM28XX_R06_I2C_CLK,
-				 EM28XX_I2C_CLK_WAIT_ENABLE |
-				 EM28XX_I2C_FREQ_100_KHZ);
 		/* TODO: someone can do some cleanup here...
 			 not everything's needed */
-		em28xx_write_regs(dev, 0x04, "\x00", 1);
+		em28xx_write_reg(dev, EM2880_R04_GPO, 0x00);
 		msleep(10);
-		em28xx_write_regs(dev, 0x04, "\x01", 1);
+		em28xx_write_reg(dev, EM2880_R04_GPO, 0x01);
 		msleep(10);
-		em28xx_write_regs(dev, 0x08, "\xfd", 1);
+		em28xx_write_reg(dev, EM28XX_R08_GPIO, 0xfd);
 		mdelay(70);
-		em28xx_write_regs(dev, 0x08, "\xfc", 1);
+		em28xx_write_reg(dev, EM28XX_R08_GPIO, 0xfc);
 		mdelay(70);
-		em28xx_write_regs(dev, 0x08, "\xdc", 1);
+		em28xx_write_reg(dev, EM28XX_R08_GPIO, 0xdc);
 		mdelay(70);
-		em28xx_write_regs(dev, 0x08, "\xfc", 1);
+		em28xx_write_reg(dev, EM28XX_R08_GPIO, 0xfc);
 		mdelay(70);
 		break;
-
 	case EM2870_BOARD_TERRATEC_XS_MT2060:
-		em28xx_write_regs(dev, EM28XX_R0F_XCLK, "\x27", 1);
-		em28xx_write_reg(dev, EM28XX_R06_I2C_CLK,
-				 EM28XX_I2C_CLK_WAIT_ENABLE |
-				 EM28XX_I2C_FREQ_100_KHZ);
 		/* this device needs some gpio writes to get the DVB-T
 		   demod work */
-		em28xx_write_regs(dev, 0x08, "\xfe", 1);
+		em28xx_write_reg(dev, EM28XX_R08_GPIO, 0xfe);
 		mdelay(70);
-		em28xx_write_regs(dev, 0x08, "\xde", 1);
+		em28xx_write_reg(dev, EM28XX_R08_GPIO, 0xde);
 		mdelay(70);
-		dev->em28xx_write_regs(dev, 0x08, "\xfe", 1);
+		em28xx_write_reg(dev, EM28XX_R08_GPIO, 0xfe);
 		mdelay(70);
 		break;
-
 	case EM2870_BOARD_PINNACLE_PCTV_DVB:
-		em28xx_write_reg(dev, EM28XX_R06_I2C_CLK,
-				 EM28XX_I2C_CLK_WAIT_ENABLE |
-				 EM28XX_I2C_FREQ_100_KHZ);
-
 		/* this device needs some gpio writes to get the
 		   DVB-T demod work */
-		em28xx_write_regs(dev, 0x08, "\xfe", 1);
+		em28xx_write_reg(dev, EM28XX_R08_GPIO, 0xfe);
 		mdelay(70);
-		em28xx_write_regs(dev, 0x08, "\xde", 1);
+		em28xx_write_reg(dev, EM28XX_R08_GPIO, 0xde);
 		mdelay(70);
-		em28xx_write_regs(dev, 0x08, "\xfe", 1);
+		em28xx_write_reg(dev, EM28XX_R08_GPIO, 0xfe);
 		mdelay(70);
-		/* switch em2880 rc protocol */
-		em28xx_write_regs(dev, EM28XX_R0F_XCLK, "\x22", 1);
-		/* should be added ir_codes here */
 		break;
-
 	case EM2820_BOARD_GADMEI_UTV310:
-		em28xx_write_regs(dev, EM28XX_R0F_XCLK, "\x27", 1);
-		em28xx_write_reg(dev, EM28XX_R06_I2C_CLK,
-				 EM28XX_I2C_CLK_WAIT_ENABLE |
-				 EM28XX_I2C_FREQ_100_KHZ);
-		/* Turn on analog audio output */
-		em28xx_write_regs_req(dev, 0x00, 0x08, "\xfd", 1);
-		break;
-
-	case EM2860_BOARD_GADMEI_UTV330:
-		/* Turn on IR */
-		em28xx_write_regs(dev, EM28XX_R0F_XCLK, "\x07", 1);
-		em28xx_write_reg(dev, EM28XX_R06_I2C_CLK,
-				 EM28XX_I2C_CLK_WAIT_ENABLE |
-				 EM28XX_I2C_FREQ_100_KHZ);
-		/* should be added ir_codes here */
-		break;
-
 	case EM2820_BOARD_MSI_VOX_USB_2:
-		em28xx_write_regs(dev, EM28XX_R0F_XCLK, "\x27", 1);
-		em28xx_write_reg(dev, EM28XX_R06_I2C_CLK,
-				 EM28XX_I2C_CLK_WAIT_ENABLE |
-				 EM28XX_I2C_FREQ_100_KHZ);
-		/* enables audio for that device */
-		em28xx_write_regs_req(dev, 0x00, 0x08, "\xfd", 1);
-		break;
-
-	case EM2874_BOARD_PINNACLE_PCTV_80E:
-		/* Set 400 KHz clock and select secondary i2c bus */
-		em28xx_write_reg(dev, EM28XX_R06_I2C_CLK,
-				 EM28XX_I2C_CLK_WAIT_ENABLE |
-				 EM2874_I2C_SECONDARY_BUS_SELECT |
-				 EM28XX_I2C_FREQ_400_KHZ);
-
-		dev->digital_gpio = em2874_pinnacle_80e_digital;
+		/* enables audio for that devices */
+		em28xx_write_reg(dev, EM28XX_R08_GPIO, 0xfd);
 		break;
 	}
 
-	em28xx_gpio_set(dev, dev->tun_analog_gpio);
+	em28xx_gpio_set(dev, dev->board.tuner_gpio);
 	em28xx_set_mode(dev, EM28XX_ANALOG_MODE);
 
 	/* Unlock device */
-	em28xx_set_mode(dev, EM28XX_MODE_UNDEFINED);
+	em28xx_set_mode(dev, EM28XX_SUSPEND);
 }
 
 static void em28xx_setup_xc3028(struct em28xx *dev, struct xc2028_ctrl *ctl)
@@ -1630,6 +1599,7 @@ static void em28xx_setup_xc3028(struct em28xx *dev, struct xc2028_ctrl *ctl)
 		ctl->demod = XC3028_FE_DEFAULT;
 		ctl->fname = XC3028L_DEFAULT_FIRMWARE;
 		break;
+	case EM2883_BOARD_HAUPPAUGE_WINTV_HVR_850:
 	case EM2883_BOARD_HAUPPAUGE_WINTV_HVR_950:
 	case EM2880_BOARD_PINNACLE_PCTV_HD_PRO:
 		/* FIXME: Better to specify the needed IF */
@@ -1814,6 +1784,7 @@ void em28xx_card_setup(struct em28xx *dev)
 	case EM2820_BOARD_HAUPPAUGE_WINTV_USB_2:
 	case EM2880_BOARD_HAUPPAUGE_WINTV_HVR_900:
 	case EM2880_BOARD_HAUPPAUGE_WINTV_HVR_900_R2:
+	case EM2883_BOARD_HAUPPAUGE_WINTV_HVR_850:
 	case EM2883_BOARD_HAUPPAUGE_WINTV_HVR_950:
 	{
 		struct tveeprom tv;
@@ -1829,7 +1800,7 @@ void em28xx_card_setup(struct em28xx *dev)
 
 		if (tv.audio_processor == V4L2_IDENT_MSPX4XX) {
 			dev->i2s_speed = 2048000;
-			dev->has_msp34xx = 1;
+			dev->board.has_msp34xx = 1;
 		}
 #ifdef CONFIG_MODULES
 		if (tv.has_ir)
@@ -1839,7 +1810,7 @@ void em28xx_card_setup(struct em28xx *dev)
 	}
 	case EM2820_BOARD_KWORLD_PVRTV2800RF:
 		/* GPIO enables sound on KWORLD PVR TV 2800RF */
-		em28xx_write_regs_req(dev, 0x00, 0x08, "\xf9", 1);
+		em28xx_write_reg(dev, EM28XX_R08_GPIO, 0xf9);
 		break;
 	case EM2820_BOARD_UNKNOWN:
 	case EM2800_BOARD_UNKNOWN:
@@ -1862,10 +1833,10 @@ void em28xx_card_setup(struct em28xx *dev)
 		break;
 	}
 
-	if (dev->has_snapshot_button)
+	if (dev->board.has_snapshot_button)
 		em28xx_register_snapshot_button(dev);
 
-	if (dev->valid == EM28XX_BOARD_NOT_VALIDATED) {
+	if (dev->board.valid == EM28XX_BOARD_NOT_VALIDATED) {
 		em28xx_errdev("\n\n");
 		em28xx_errdev("The support for this board weren't "
 			      "valid yet.\n");
@@ -1880,13 +1851,13 @@ void em28xx_card_setup(struct em28xx *dev)
 
 #ifdef CONFIG_MODULES
 	/* request some modules */
-	if (dev->has_msp34xx)
+	if (dev->board.has_msp34xx)
 		request_module("msp3400");
-	if (dev->decoder == EM28XX_SAA7113 || dev->decoder == EM28XX_SAA7114)
+	if (dev->board.decoder == EM28XX_SAA711X)
 		request_module("saa7115");
-	if (dev->decoder == EM28XX_TVP5150)
+	if (dev->board.decoder == EM28XX_TVP5150)
 		request_module("tvp5150");
-	if (dev->tuner_type != TUNER_ABSENT)
+	if (dev->board.tuner_type != TUNER_ABSENT)
 		request_module("tuner");
 #endif
 
@@ -1894,3 +1865,4 @@ void em28xx_card_setup(struct em28xx *dev)
 
 	em28xx_ir_init(dev);
 }
+
diff --git a/linux/drivers/media/video/em28xx/em28xx-core.c b/linux/drivers/media/video/em28xx/em28xx-core.c
index eb8515895..f62b05eae 100644
--- a/linux/drivers/media/video/em28xx/em28xx-core.c
+++ b/linux/drivers/media/video/em28xx/em28xx-core.c
@@ -66,7 +66,8 @@ MODULE_PARM_DESC(alt, "alternate setting to use for video endpoint");
 int em28xx_read_reg_req_len(struct em28xx *dev, u8 req, u16 reg,
 				   char *buf, int len)
 {
-	int ret, byte;
+	int ret;
+	int pipe = usb_rcvctrlpipe(dev->udev, 0);
 
 	if (dev->state & DEV_DISCONNECTED)
 		return -ENODEV;
@@ -74,10 +75,18 @@ int em28xx_read_reg_req_len(struct em28xx *dev, u8 req, u16 reg,
 	if (len > URB_MAX_CTRL_SIZE)
 		return -EINVAL;
 
-	em28xx_regdbg("req=%02x, reg=%02x ", req, reg);
+	if (reg_debug) {
+		printk( KERN_DEBUG "(pipe 0x%08x): "
+			"IN:  %02x %02x %02x %02x %02x %02x %02x %02x ",
+			pipe,
+			USB_DIR_IN | USB_TYPE_VENDOR | USB_RECIP_DEVICE,
+			req, 0, 0,
+			reg & 0xff, reg >> 8,
+			len & 0xff, len >> 8);
+	}
 
 	mutex_lock(&dev->ctrl_urb_lock);
-	ret = usb_control_msg(dev->udev, usb_rcvctrlpipe(dev->udev, 0), req,
+	ret = usb_control_msg(dev->udev, pipe, req,
 			      USB_DIR_IN | USB_TYPE_VENDOR | USB_RECIP_DEVICE,
 			      0x0000, reg, dev->urb_buf, len, HZ);
 	if (ret < 0) {
@@ -93,7 +102,9 @@ int em28xx_read_reg_req_len(struct em28xx *dev, u8 req, u16 reg,
 	mutex_unlock(&dev->ctrl_urb_lock);
 
 	if (reg_debug) {
-		printk("%02x values: ", ret);
+		int byte;
+
+		printk("<<<");
 		for (byte = 0; byte < len; byte++)
 			printk(" %02x", (unsigned char)buf[byte]);
 		printk("\n");
@@ -108,28 +119,12 @@ int em28xx_read_reg_req_len(struct em28xx *dev, u8 req, u16 reg,
  */
 int em28xx_read_reg_req(struct em28xx *dev, u8 req, u16 reg)
 {
-	u8 val;
 	int ret;
+	u8 val;
 
-	if (dev->state & DEV_DISCONNECTED)
-		return(-ENODEV);
-
-	em28xx_regdbg("req=%02x, reg=%02x:", req, reg);
-
-	mutex_lock(&dev->ctrl_urb_lock);
-	ret = usb_control_msg(dev->udev, usb_rcvctrlpipe(dev->udev, 0), req,
-			      USB_DIR_IN | USB_TYPE_VENDOR | USB_RECIP_DEVICE,
-			      0x0000, reg, dev->urb_buf, 1, HZ);
-	val = dev->urb_buf[0];
-	mutex_unlock(&dev->ctrl_urb_lock);
-
-	if (ret < 0) {
-		printk(" failed!\n");
+	ret = em28xx_read_reg_req_len(dev, req, reg, &val, 1);
+	if (ret < 0)
 		return ret;
-	}
-
-	if (reg_debug)
-		printk("%02x\n", (unsigned char) val);
 
 	return val;
 }
@@ -147,6 +142,7 @@ int em28xx_write_regs_req(struct em28xx *dev, u8 req, u16 reg, char *buf,
 				 int len)
 {
 	int ret;
+	int pipe = usb_sndctrlpipe(dev->udev, 0);
 
 	if (dev->state & DEV_DISCONNECTED)
 		return -ENODEV;
@@ -154,17 +150,25 @@ int em28xx_write_regs_req(struct em28xx *dev, u8 req, u16 reg, char *buf,
 	if ((len < 1) || (len > URB_MAX_CTRL_SIZE))
 		return -EINVAL;
 
-	em28xx_regdbg("req=%02x reg=%02x:", req, reg);
 	if (reg_debug) {
-		int i;
-		for (i = 0; i < len; ++i)
-			printk(" %02x", (unsigned char)buf[i]);
+		int byte;
+
+		printk( KERN_DEBUG "(pipe 0x%08x): "
+			"OUT: %02x %02x %02x %02x %02x %02x %02x %02x >>>",
+			pipe,
+			USB_DIR_OUT | USB_TYPE_VENDOR | USB_RECIP_DEVICE,
+			req, 0, 0,
+			reg & 0xff, reg >> 8,
+			len & 0xff, len >> 8);
+
+		for (byte = 0; byte < len; byte++)
+			printk(" %02x", (unsigned char)buf[byte]);
 		printk("\n");
 	}
 
 	mutex_lock(&dev->ctrl_urb_lock);
 	memcpy(dev->urb_buf, buf, len);
-	ret = usb_control_msg(dev->udev, usb_sndctrlpipe(dev->udev, 0), req,
+	ret = usb_control_msg(dev->udev, pipe, req,
 			      USB_DIR_OUT | USB_TYPE_VENDOR | USB_RECIP_DEVICE,
 			      0x0000, reg, dev->urb_buf, len, HZ);
 	mutex_unlock(&dev->ctrl_urb_lock);
@@ -349,7 +353,7 @@ static int em28xx_set_audio_source(struct em28xx *dev)
 	int ret;
 	u8 input;
 
-	if (dev->is_em2800) {
+	if (dev->board.is_em2800) {
 		if (dev->ctl_ainput == EM28XX_AMUX_VIDEO)
 			input = EM2800_AUDIO_SRC_TUNER;
 		else
@@ -360,7 +364,7 @@ static int em28xx_set_audio_source(struct em28xx *dev)
 			return ret;
 	}
 
-	if (dev->has_msp34xx)
+	if (dev->board.has_msp34xx)
 		input = EM28XX_AUDIO_SRC_TUNER;
 	else {
 		switch (dev->ctl_ainput) {
@@ -399,7 +403,7 @@ struct em28xx_vol_table outputs[] = {
 int em28xx_audio_analog_set(struct em28xx *dev)
 {
 	int ret, i;
-	u8 xclk = 0x07;
+	u8 xclk;
 
 	if (!dev->audio_mode.has_audio)
 		return 0;
@@ -417,13 +421,11 @@ int em28xx_audio_analog_set(struct em28xx *dev)
 		}
 	}
 
-	if (dev->has_12mhz_i2s)
-		xclk |= 0x20;
-
+	xclk = dev->board.xclk & 0x7f;
 	if (!dev->mute)
 		xclk |= 0x80;
 
-	ret = em28xx_write_reg_bits(dev, EM28XX_R0F_XCLK, xclk, 0xa7);
+	ret = em28xx_write_reg(dev, EM28XX_R0F_XCLK, xclk);
 	if (ret < 0)
 		return ret;
 	msleep(10);
@@ -556,20 +558,20 @@ EXPORT_SYMBOL_GPL(em28xx_audio_setup);
 
 int em28xx_colorlevels_set_default(struct em28xx *dev)
 {
-	em28xx_write_regs(dev, EM28XX_R20_YGAIN, "\x10", 1);	/* contrast */
-	em28xx_write_regs(dev, EM28XX_R21_YOFFSET, "\x00", 1);	/* brightness */
-	em28xx_write_regs(dev, EM28XX_R22_UVGAIN, "\x10", 1);	/* saturation */
-	em28xx_write_regs(dev, EM28XX_R23_UOFFSET, "\x00", 1);
-	em28xx_write_regs(dev, EM28XX_R24_VOFFSET, "\x00", 1);
-	em28xx_write_regs(dev, EM28XX_R25_SHARPNESS, "\x00", 1);
-
-	em28xx_write_regs(dev, EM28XX_R14_GAMMA, "\x20", 1);
-	em28xx_write_regs(dev, EM28XX_R15_RGAIN, "\x20", 1);
-	em28xx_write_regs(dev, EM28XX_R16_GGAIN, "\x20", 1);
-	em28xx_write_regs(dev, EM28XX_R17_BGAIN, "\x20", 1);
-	em28xx_write_regs(dev, EM28XX_R18_ROFFSET, "\x00", 1);
-	em28xx_write_regs(dev, EM28XX_R19_GOFFSET, "\x00", 1);
-	return em28xx_write_regs(dev, EM28XX_R1A_BOFFSET, "\x00", 1);
+	em28xx_write_reg(dev, EM28XX_R20_YGAIN, 0x10);	/* contrast */
+	em28xx_write_reg(dev, EM28XX_R21_YOFFSET, 0x00);	/* brightness */
+	em28xx_write_reg(dev, EM28XX_R22_UVGAIN, 0x10);	/* saturation */
+	em28xx_write_reg(dev, EM28XX_R23_UOFFSET, 0x00);
+	em28xx_write_reg(dev, EM28XX_R24_VOFFSET, 0x00);
+	em28xx_write_reg(dev, EM28XX_R25_SHARPNESS, 0x00);
+
+	em28xx_write_reg(dev, EM28XX_R14_GAMMA, 0x20);
+	em28xx_write_reg(dev, EM28XX_R15_RGAIN, 0x20);
+	em28xx_write_reg(dev, EM28XX_R16_GGAIN, 0x20);
+	em28xx_write_reg(dev, EM28XX_R17_BGAIN, 0x20);
+	em28xx_write_reg(dev, EM28XX_R18_ROFFSET, 0x00);
+	em28xx_write_reg(dev, EM28XX_R19_GOFFSET, 0x00);
+	return em28xx_write_reg(dev, EM28XX_R1A_BOFFSET, 0x00);
 }
 
 int em28xx_capture_start(struct em28xx *dev, int start)
@@ -602,17 +604,17 @@ int em28xx_capture_start(struct em28xx *dev, int start)
 
 	if (!start) {
 		/* disable video capture */
-		rc = em28xx_write_regs(dev, EM28XX_R12_VINENABLE, "\x27", 1);
+		rc = em28xx_write_reg(dev, EM28XX_R12_VINENABLE, 0x27);
 		return rc;
 	}
 
 	/* enable video capture */
-	rc = em28xx_write_regs_req(dev, 0x00, 0x48, "\x00", 1);
+	rc = em28xx_write_reg(dev, 0x48, 0x00);
 
 	if (dev->mode == EM28XX_ANALOG_MODE)
-		rc = em28xx_write_regs(dev, EM28XX_R12_VINENABLE, "\x67", 1);
+		rc = em28xx_write_reg(dev, EM28XX_R12_VINENABLE, 0x67);
 	else
-		rc = em28xx_write_regs(dev, EM28XX_R12_VINENABLE, "\x37", 1);
+		rc = em28xx_write_reg(dev, EM28XX_R12_VINENABLE, 0x37);
 
 	msleep(6);
 
@@ -621,9 +623,9 @@ int em28xx_capture_start(struct em28xx *dev, int start)
 
 int em28xx_outfmt_set_yuv422(struct em28xx *dev)
 {
-	em28xx_write_regs(dev, EM28XX_R27_OUTFMT, "\x34", 1);
-	em28xx_write_regs(dev, EM28XX_R10_VINMODE, "\x10", 1);
-	return em28xx_write_regs(dev, EM28XX_R11_VINCTRL, "\x11", 1);
+	em28xx_write_reg(dev, EM28XX_R27_OUTFMT, 0x34);
+	em28xx_write_reg(dev, EM28XX_R10_VINMODE, 0x10);
+	return em28xx_write_reg(dev, EM28XX_R11_VINCTRL, 0x11);
 }
 
 static int em28xx_accumulator_set(struct em28xx *dev, u8 xmin, u8 xmax,
@@ -660,7 +662,7 @@ static int em28xx_scaler_set(struct em28xx *dev, u16 h, u16 v)
 {
 	u8 mode;
 	/* the em2800 scaler only supports scaling down to 50% */
-	if (dev->is_em2800)
+	if (dev->board.is_em2800)
 		mode = (v ? 0x20 : 0x00) | (h ? 0x10 : 0x00);
 	else {
 		u8 buf[2];
@@ -739,12 +741,14 @@ int em28xx_gpio_set(struct em28xx *dev, struct em28xx_reg_seq *gpio)
 	if (!gpio)
 		return rc;
 
-	dev->em28xx_write_regs_req(dev, 0x00, 0x48, "\x00", 1);
-	if (dev->mode == EM28XX_ANALOG_MODE)
-		dev->em28xx_write_regs_req(dev, 0x00, 0x12, "\x67", 1);
-	else
-		dev->em28xx_write_regs_req(dev, 0x00, 0x12, "\x37", 1);
-	msleep(6);
+	if (dev->mode != EM28XX_SUSPEND) {
+		em28xx_write_reg(dev, 0x48, 0x00);
+		if (dev->mode == EM28XX_ANALOG_MODE)
+			em28xx_write_reg(dev, EM28XX_R12_VINENABLE, 0x67);
+		else
+			em28xx_write_reg(dev, EM28XX_R12_VINENABLE, 0x37);
+		msleep(6);
+	}
 
 	/* Send GPIO reset sequences specified at board entry */
 	while (gpio->sleep >= 0) {
@@ -769,22 +773,25 @@ int em28xx_set_mode(struct em28xx *dev, enum em28xx_mode set_mode)
 	if (dev->mode == set_mode)
 		return 0;
 
-	if (set_mode == EM28XX_MODE_UNDEFINED) {
+	if (set_mode == EM28XX_SUSPEND) {
 		dev->mode = set_mode;
-		return 0;
+
+		/* FIXME: add suspend support for ac97 */
+
+		return em28xx_gpio_set(dev, dev->board.suspend_gpio);
 	}
 
 #if 0
 	/* Resource is locked */
-	if (dev->mode != EM28XX_MODE_UNDEFINED)
+	if (dev->mode != EM28XX_SUSPEND)
 		return -EINVAL;
 #endif
 	dev->mode = set_mode;
 
 	if (dev->mode == EM28XX_DIGITAL_MODE)
-		return em28xx_gpio_set(dev, dev->digital_gpio);
+		return em28xx_gpio_set(dev, dev->board.dvb_gpio);
 	else
-		return em28xx_gpio_set(dev, dev->analog_gpio);
+		return em28xx_gpio_set(dev, INPUT(dev->ctl_input)->gpio);
 }
 EXPORT_SYMBOL_GPL(em28xx_set_mode);
 
diff --git a/linux/drivers/media/video/em28xx/em28xx-dvb.c b/linux/drivers/media/video/em28xx/em28xx-dvb.c
index 714d35c51..8d3ed7dc8 100644
--- a/linux/drivers/media/video/em28xx/em28xx-dvb.c
+++ b/linux/drivers/media/video/em28xx/em28xx-dvb.c
@@ -162,7 +162,7 @@ static int stop_streaming(struct em28xx_dvb *dvb)
 
 	em28xx_uninit_isoc(dev);
 
-	em28xx_set_mode(dev, EM28XX_MODE_UNDEFINED);
+	em28xx_set_mode(dev, EM28XX_SUSPEND);
 
 	return 0;
 }
@@ -216,7 +216,7 @@ static int em28xx_dvb_bus_ctrl(struct dvb_frontend *fe, int acquire)
 	if (acquire)
 		return em28xx_set_mode(dev, EM28XX_DIGITAL_MODE);
 	else
-		return em28xx_set_mode(dev, EM28XX_MODE_UNDEFINED);
+		return em28xx_set_mode(dev, EM28XX_SUSPEND);
 }
 
 /* ------------------------------------------------------------------ */
@@ -394,7 +394,7 @@ static int dvb_init(struct em28xx *dev)
 	int result = 0;
 	struct em28xx_dvb *dvb;
 
-	if (!dev->has_dvb) {
+	if (!dev->board.has_dvb) {
 		/* This device does not support the extension */
 		return 0;
 	}
@@ -410,8 +410,10 @@ static int dvb_init(struct em28xx *dev)
 	em28xx_set_mode(dev, EM28XX_DIGITAL_MODE);
 	/* init frontend */
 	switch (dev->model) {
+	case EM2883_BOARD_HAUPPAUGE_WINTV_HVR_850:
 	case EM2883_BOARD_HAUPPAUGE_WINTV_HVR_950:
 	case EM2880_BOARD_PINNACLE_PCTV_HD_PRO:
+	case EM2883_BOARD_KWORLD_HYBRID_A316:
 	case EM2880_BOARD_AMD_ATI_TV_WONDER_HD_600:
 		dvb->frontend = dvb_attach(lgdt330x_attach,
 					   &em2880_lgdt3303_dev,
@@ -467,12 +469,12 @@ static int dvb_init(struct em28xx *dev)
 	if (result < 0)
 		goto out_free;
 
-	em28xx_set_mode(dev, EM28XX_MODE_UNDEFINED);
+	em28xx_set_mode(dev, EM28XX_SUSPEND);
 	printk(KERN_INFO "Successfully loaded em28xx-dvb\n");
 	return 0;
 
 out_free:
-	em28xx_set_mode(dev, EM28XX_MODE_UNDEFINED);
+	em28xx_set_mode(dev, EM28XX_SUSPEND);
 	kfree(dvb);
 	dev->dvb = NULL;
 	return result;
@@ -480,7 +482,7 @@ out_free:
 
 static int dvb_fini(struct em28xx *dev)
 {
-	if (!dev->has_dvb) {
+	if (!dev->board.has_dvb) {
 		/* This device does not support the extension */
 		return 0;
 	}
diff --git a/linux/drivers/media/video/em28xx/em28xx-i2c.c b/linux/drivers/media/video/em28xx/em28xx-i2c.c
index ec3e3b157..7084728eb 100644
--- a/linux/drivers/media/video/em28xx/em28xx-i2c.c
+++ b/linux/drivers/media/video/em28xx/em28xx-i2c.c
@@ -250,7 +250,7 @@ static int em28xx_i2c_xfer(struct i2c_adapter *i2c_adap,
 			 (msgs[i].flags & I2C_M_RD) ? "read" : "write",
 			 i == num - 1 ? "stop" : "nonstop", addr, msgs[i].len);
 		if (!msgs[i].len) { /* no len: check only for device presence */
-			if (dev->is_em2800)
+			if (dev->board.is_em2800)
 				rc = em2800_i2c_check_for_device(dev, addr);
 			else
 				rc = em28xx_i2c_check_for_device(dev, addr);
@@ -261,7 +261,7 @@ static int em28xx_i2c_xfer(struct i2c_adapter *i2c_adap,
 
 		} else if (msgs[i].flags & I2C_M_RD) {
 			/* read bytes */
-			if (dev->is_em2800)
+			if (dev->board.is_em2800)
 				rc = em2800_i2c_recv_bytes(dev, addr,
 							   msgs[i].buf,
 							   msgs[i].len);
@@ -279,7 +279,7 @@ static int em28xx_i2c_xfer(struct i2c_adapter *i2c_adap,
 				for (byte = 0; byte < msgs[i].len; byte++)
 					printk(" %02x", msgs[i].buf[byte]);
 			}
-			if (dev->is_em2800)
+			if (dev->board.is_em2800)
 				rc = em2800_i2c_send_bytes(dev, addr,
 							   msgs[i].buf,
 							   msgs[i].len);
@@ -388,47 +388,49 @@ static int em28xx_i2c_eeprom(struct em28xx *dev, unsigned char *eedata, int len)
 	if (em_eeprom->id == 0x9567eb1a)
 		dev->hash = em28xx_hash_mem(eedata, len, 32);
 
-	printk(KERN_INFO "EEPROM ID= 0x%08x, hash = 0x%08lx\n",
-	       em_eeprom->id, dev->hash);
-	printk(KERN_INFO "Vendor/Product ID= %04x:%04x\n", em_eeprom->vendor_ID,
-	       em_eeprom->product_ID);
+	printk(KERN_INFO "%s: EEPROM ID= 0x%08x, EEPROM hash = 0x%08lx\n",
+	       dev->name, em_eeprom->id, dev->hash);
+
+	printk(KERN_INFO "%s: EEPROM info:\n", dev->name);
 
 	switch (em_eeprom->chip_conf >> 4 & 0x3) {
 	case 0:
-		printk(KERN_INFO "No audio on board.\n");
+		printk(KERN_INFO "%s:\tNo audio on board.\n", dev->name);
 		break;
 	case 1:
-		printk(KERN_INFO "AC97 audio (5 sample rates)\n");
+		printk(KERN_INFO "%s:\tAC97 audio (5 sample rates)\n",
+				 dev->name);
 		break;
 	case 2:
-		printk(KERN_INFO "I2S audio, sample rate=32k\n");
+		printk(KERN_INFO "%s:\tI2S audio, sample rate=32k\n", dev->name);
 		break;
 	case 3:
-		printk(KERN_INFO "I2S audio, 3 sample rates\n");
+		printk(KERN_INFO "%s:\tI2S audio, 3 sample rates\n", dev->name);
 		break;
 	}
 
 	if (em_eeprom->chip_conf & 1 << 3)
-		printk(KERN_INFO "USB Remote wakeup capable\n");
+		printk(KERN_INFO "%s:\tUSB Remote wakeup capable\n", dev->name);
 
 	if (em_eeprom->chip_conf & 1 << 2)
-		printk(KERN_INFO "USB Self power capable\n");
+		printk(KERN_INFO "%s:\tUSB Self power capable\n", dev->name);
 
 	switch (em_eeprom->chip_conf & 0x3) {
 	case 0:
-		printk(KERN_INFO "500mA max power\n");
+		printk(KERN_INFO "%s:\t500mA max power\n", dev->name);
 		break;
 	case 1:
-		printk(KERN_INFO "400mA max power\n");
+		printk(KERN_INFO "%s:\t400mA max power\n", dev->name);
 		break;
 	case 2:
-		printk(KERN_INFO "300mA max power\n");
+		printk(KERN_INFO "%s:\t300mA max power\n", dev->name);
 		break;
 	case 3:
-		printk(KERN_INFO "200mA max power\n");
+		printk(KERN_INFO "%s:\t200mA max power\n", dev->name);
 		break;
 	}
-	printk(KERN_INFO "Table at 0x%02x, strings=0x%04x, 0x%04x, 0x%04x\n",
+	printk(KERN_INFO "%s:\tTable at 0x%02x, strings=0x%04x, 0x%04x, 0x%04x\n",
+				dev->name,
 				em_eeprom->string_idx_table,
 				em_eeprom->string1,
 				em_eeprom->string2,
@@ -521,6 +523,9 @@ static int attach_inform(struct i2c_client *client)
 static struct i2c_algorithm em28xx_algo = {
 	.master_xfer   = em28xx_i2c_xfer,
 	.functionality = functionality,
+#ifdef NEED_ALGO_CONTROL
+	.algo_control = dummy_algo_control,
+#endif
 };
 
 static struct i2c_adapter em28xx_adap_template = {
diff --git a/linux/drivers/media/video/em28xx/em28xx-input.c b/linux/drivers/media/video/em28xx/em28xx-input.c
index 29900920d..d6ef5c461 100644
--- a/linux/drivers/media/video/em28xx/em28xx-input.c
+++ b/linux/drivers/media/video/em28xx/em28xx-input.c
@@ -345,7 +345,7 @@ int em28xx_ir_init(struct em28xx *dev)
 	u8 ir_config;
 	int err = -ENOMEM;
 
-	if (dev->ir_codes == NULL) {
+	if (dev->board.ir_codes == NULL) {
 		/* No remote control support */
 		return 0;
 	}
@@ -384,7 +384,7 @@ int em28xx_ir_init(struct em28xx *dev)
 	usb_make_path(dev->udev, ir->phys, sizeof(ir->phys));
 	strlcat(ir->phys, "/input0", sizeof(ir->phys));
 
-	ir_input_init(input_dev, &ir->ir, IR_TYPE_OTHER, dev->ir_codes);
+	ir_input_init(input_dev, &ir->ir, IR_TYPE_OTHER, dev->board.ir_codes);
 	input_dev->name = ir->name;
 	input_dev->phys = ir->phys;
 	input_dev->id.bustype = BUS_USB;
diff --git a/linux/drivers/media/video/em28xx/em28xx-reg.h b/linux/drivers/media/video/em28xx/em28xx-reg.h
index 98e95054e..45d588c3a 100644
--- a/linux/drivers/media/video/em28xx/em28xx-reg.h
+++ b/linux/drivers/media/video/em28xx/em28xx-reg.h
@@ -51,6 +51,24 @@
 #define EM28XX_R0E_AUDIOSRC	0x0e
 #define EM28XX_R0F_XCLK	0x0f
 
+/* em28xx XCLK Register (0x0f) */
+#define EM28XX_XCLK_AUDIO_UNMUTE	0x80 /* otherwise audio muted */
+#define EM28XX_XCLK_I2S_MSB_TIMING	0x40 /* otherwise standard timing */
+#define EM28XX_XCLK_IR_RC5_MODE		0x20 /* otherwise NEC mode */
+#define EM28XX_XCLK_IR_NEC_CHK_PARITY	0x10
+#define EM28XX_XCLK_FREQUENCY_30MHZ	0x00 /* Freq. select (bits [3-0]) */
+#define EM28XX_XCLK_FREQUENCY_15MHZ	0x01
+#define EM28XX_XCLK_FREQUENCY_10MHZ	0x02
+#define EM28XX_XCLK_FREQUENCY_7_5MHZ	0x03
+#define EM28XX_XCLK_FREQUENCY_6MHZ	0x04
+#define EM28XX_XCLK_FREQUENCY_5MHZ	0x05
+#define EM28XX_XCLK_FREQUENCY_4_3MHZ	0x06
+#define EM28XX_XCLK_FREQUENCY_12MHZ	0x07
+#define EM28XX_XCLK_FREQUENCY_20MHZ	0x08
+#define EM28XX_XCLK_FREQUENCY_20MHZ_2	0x09
+#define EM28XX_XCLK_FREQUENCY_48MHZ	0x0a
+#define EM28XX_XCLK_FREQUENCY_24MHZ	0x0b
+
 #define EM28XX_R10_VINMODE	0x10
 #define EM28XX_R11_VINCTRL	0x11
 #define EM28XX_R12_VINENABLE	0x12	/* */
diff --git a/linux/drivers/media/video/em28xx/em28xx-video.c b/linux/drivers/media/video/em28xx/em28xx-video.c
index 5da519bfa..ff960f90c 100644
--- a/linux/drivers/media/video/em28xx/em28xx-video.c
+++ b/linux/drivers/media/video/em28xx/em28xx-video.c
@@ -521,8 +521,8 @@ static int em28xx_config(struct em28xx *dev)
 	int retval;
 
 	/* Sets I2C speed to 100 KHz */
-	if (!dev->is_em2800) {
-		retval = em28xx_write_regs_req(dev, 0x00, 0x06, "\x40", 1);
+	if (!dev->board.is_em2800) {
+		retval = em28xx_write_reg(dev, EM28XX_R06_I2C_CLK, 0x40);
 		if (retval < 0) {
 			em28xx_errdev("%s: em28xx_write_regs_req failed! retval [%d]\n",
 				__func__, retval);
@@ -533,9 +533,9 @@ static int em28xx_config(struct em28xx *dev)
 #if 1
 	/* enable vbi capturing */
 
-/*	em28xx_write_regs_req(dev, 0x00, 0x0e, "\xC0", 1); audio register */
-/*	em28xx_write_regs_req(dev, 0x00, 0x0f, "\x80", 1); clk register */
-	em28xx_write_regs_req(dev, 0x00, 0x11, "\x51", 1);
+/*	em28xx_write_reg(dev, EM28XX_R0E_AUDIOSRC, 0xc0); audio register */
+/*	em28xx_write_reg(dev, EM28XX_R0F_XCLK, 0x80); clk register */
+	em28xx_write_reg(dev, EM28XX_R11_VINCTRL, 0x51);
 #endif
 
 	dev->mute = 1;		/* maybe not the right place... */
@@ -578,7 +578,7 @@ static void video_mux(struct em28xx *dev, int index)
 
 	em28xx_i2c_call_clients(dev, VIDIOC_INT_S_VIDEO_ROUTING, &route);
 
-	if (dev->has_msp34xx) {
+	if (dev->board.has_msp34xx) {
 		if (dev->i2s_speed) {
 			em28xx_i2c_call_clients(dev, VIDIOC_INT_I2S_CLOCK_FREQ,
 				&dev->i2s_speed);
@@ -752,7 +752,7 @@ static int vidioc_try_fmt_vid_cap(struct file *file, void *priv,
 
 	mutex_lock(&dev->lock);
 
-	if (dev->is_em2800) {
+	if (dev->board.is_em2800) {
 		/* the em2800 can only scale down to 50% */
 		if (height % (maxh / 2))
 			height = maxh;
@@ -1009,7 +1009,7 @@ static int vidioc_queryctrl(struct file *file, void *priv,
 
 	qc->id = id;
 
-	if (!dev->has_msp34xx) {
+	if (!dev->board.has_msp34xx) {
 		for (i = 0; i < ARRAY_SIZE(em28xx_qctrl); i++) {
 			if (qc->id && qc->id == em28xx_qctrl[i].id) {
 				memcpy(qc, &(em28xx_qctrl[i]), sizeof(*qc));
@@ -1039,7 +1039,7 @@ static int vidioc_g_ctrl(struct file *file, void *priv,
 		return rc;
 	mutex_lock(&dev->lock);
 
-	if (!dev->has_msp34xx)
+	if (!dev->board.has_msp34xx)
 		rc = em28xx_get_ctrl(dev, ctrl);
 	else
 		rc = -EINVAL;
@@ -1067,7 +1067,7 @@ static int vidioc_s_ctrl(struct file *file, void *priv,
 
 	mutex_lock(&dev->lock);
 
-	if (dev->has_msp34xx)
+	if (dev->board.has_msp34xx)
 		em28xx_i2c_call_clients(dev, VIDIOC_S_CTRL, ctrl);
 	else {
 		rc = 1;
@@ -1758,9 +1758,12 @@ static int em28xx_v4l2_close(struct inode *inode, struct file *filp)
 			return 0;
 		}
 
+		/* Save some power by putting tuner to sleep */
+		em28xx_i2c_call_clients(dev, TUNER_SET_STANDBY, NULL);
+
 		/* do this before setting alternate! */
 		em28xx_uninit_isoc(dev);
-		em28xx_set_mode(dev, EM28XX_MODE_UNDEFINED);
+		em28xx_set_mode(dev, EM28XX_SUSPEND);
 
 		/* set alternate 0 */
 		dev->alt = 0;
@@ -2103,7 +2106,7 @@ static int em28xx_init_dev(struct em28xx **devhandle, struct usb_device *udev,
 	dev->em28xx_read_reg_req_len = em28xx_read_reg_req_len;
 	dev->em28xx_write_regs_req = em28xx_write_regs_req;
 	dev->em28xx_read_reg_req = em28xx_read_reg_req;
-	dev->is_em2800 = em28xx_boards[dev->model].is_em2800;
+	dev->board.is_em2800 = em28xx_boards[dev->model].is_em2800;
 
 	em28xx_pre_card_setup(dev);
 
@@ -2163,9 +2166,9 @@ static int em28xx_init_dev(struct em28xx **devhandle, struct usb_device *udev,
 	video_set_drvdata(dev->vbi_dev, dev);
 #endif
 
-	if (dev->has_msp34xx) {
+	if (dev->board.has_msp34xx) {
 		/* Send a reset to other chips via gpio */
-		errCode = em28xx_write_regs_req(dev, 0x00, 0x08, "\xf7", 1);
+		errCode = em28xx_write_reg(dev, EM28XX_R08_GPIO, 0xf7);
 		if (errCode < 0) {
 			em28xx_errdev("%s: em28xx_write_regs_req - msp34xx(1) failed! errCode [%d]\n",
 				__func__, errCode);
@@ -2173,7 +2176,7 @@ static int em28xx_init_dev(struct em28xx **devhandle, struct usb_device *udev,
 		}
 		msleep(3);
 
-		errCode = em28xx_write_regs_req(dev, 0x00, 0x08, "\xff", 1);
+		errCode = em28xx_write_reg(dev, EM28XX_R08_GPIO, 0xff);
 		if (errCode < 0) {
 			em28xx_errdev("%s: em28xx_write_regs_req - msp34xx(2) failed! errCode [%d]\n",
 				__func__, errCode);
@@ -2203,10 +2206,11 @@ static int em28xx_init_dev(struct em28xx **devhandle, struct usb_device *udev,
 	mutex_unlock(&em28xx_extension_devlist_lock);
 	mutex_unlock(&em28xx_devlist_mutex);
 
+	/* Save some power by putting tuner to sleep */
+	em28xx_i2c_call_clients(dev, TUNER_SET_STANDBY, NULL);
+
 	return 0;
 
-fail_unreg:
-	em28xx_release_resources(dev);
 fail_reg_devices:
 	mutex_unlock(&dev->lock);
 	return retval;
@@ -2229,7 +2233,7 @@ static void request_module_async(struct work_struct *work)
 	else if (dev->has_alsa_audio)
 		request_module("em28xx-alsa");
 
-	if (dev->has_dvb)
+	if (dev->board.has_dvb)
 		request_module("em28xx-dvb");
 }
 
@@ -2260,6 +2264,8 @@ static int em28xx_usb_probe(struct usb_interface *interface,
 	struct em28xx *dev = NULL;
 	int retval = -ENODEV;
 	int i, nr, ifnum, isoc_pipe;
+	char *speed;
+	char descr[255] = "";
 
 	udev = usb_get_dev(interface_to_usbdev(interface));
 	ifnum = interface->altsetting[0].desc.bInterfaceNumber;
@@ -2270,11 +2276,12 @@ static int em28xx_usb_probe(struct usb_interface *interface,
 
 	/* Don't register audio interfaces */
 	if (interface->altsetting[0].desc.bInterfaceClass == USB_CLASS_AUDIO) {
-		em28xx_err(DRIVER_NAME " audio device (%04x:%04x): interface %i, class %i\n",
-				udev->descriptor.idVendor,
-				udev->descriptor.idProduct,
-				ifnum,
-				interface->altsetting[0].desc.bInterfaceClass);
+		em28xx_err(DRIVER_NAME " audio device (%04x:%04x): "
+			"interface %i, class %i\n",
+			le16_to_cpu(udev->descriptor.idVendor),
+			le16_to_cpu(udev->descriptor.idProduct),
+			ifnum,
+			interface->altsetting[0].desc.bInterfaceClass);
 
 		em28xx_devused &= ~(1<<nr);
 		return -ENODEV;
@@ -2303,8 +2310,8 @@ static int em28xx_usb_probe(struct usb_interface *interface,
 		if (!check_interface) {
 			em28xx_err(DRIVER_NAME " video device (%04x:%04x): "
 				"interface %i, class %i found.\n",
-				udev->descriptor.idVendor,
-				udev->descriptor.idProduct,
+				le16_to_cpu(udev->descriptor.idVendor),
+				le16_to_cpu(udev->descriptor.idProduct),
 				ifnum,
 				interface->altsetting[0].desc.bInterfaceClass);
 
@@ -2314,14 +2321,42 @@ static int em28xx_usb_probe(struct usb_interface *interface,
 			em28xx_devused &= ~(1<<nr);
 			return -ENODEV;
 		}
+	}
 
+	switch (udev->speed) {
+	case USB_SPEED_LOW:
+		speed = "1.5";
+		break;
+	case USB_SPEED_UNKNOWN:
+	case USB_SPEED_FULL:
+		speed = "12";
+		break;
+	case USB_SPEED_HIGH:
+		speed = "480";
+		break;
+	default:
+		speed = "unknown";
 	}
 
-	em28xx_err(DRIVER_NAME " new video device (%04x:%04x): interface %i, class %i\n",
-			udev->descriptor.idVendor,
-			udev->descriptor.idProduct,
-			ifnum,
-			interface->altsetting[0].desc.bInterfaceClass);
+	if (udev->manufacturer)
+		strlcpy(descr, udev->manufacturer, sizeof(descr));
+
+	if (udev->product) {
+		if (*descr)
+			strlcat(descr, " ", sizeof(descr));
+		strlcat(descr, udev->product, sizeof(descr));
+	}
+	if (*descr)
+		strlcat(descr, " ", sizeof(descr));
+
+	printk(DRIVER_NAME ": New device %s@ %s Mbps "
+		"(%04x:%04x, interface %d, class %d)\n",
+		descr,
+		speed,
+		le16_to_cpu(udev->descriptor.idVendor),
+		le16_to_cpu(udev->descriptor.idProduct),
+		ifnum,
+		interface->altsetting->desc.bInterfaceNumber);
 
 	if (nr >= EM28XX_MAXBOARDS) {
 		printk(DRIVER_NAME ": Supports only %i em28xx boards.\n",
@@ -2356,7 +2391,7 @@ static int em28xx_usb_probe(struct usb_interface *interface,
 	uif = udev->actconfig->interface[0];
 
 	dev->num_alt = uif->num_altsetting;
-	em28xx_info("Alternate settings: %i\n", dev->num_alt);
+	em28xx_videodbg("Alternate settings: %i\n", dev->num_alt);
 /*	dev->alt_max_pkt_size = kmalloc(sizeof(*dev->alt_max_pkt_size)* */
 	dev->alt_max_pkt_size = kmalloc(32 * dev->num_alt, GFP_KERNEL);
 
@@ -2372,7 +2407,7 @@ static int em28xx_usb_probe(struct usb_interface *interface,
 							wMaxPacketSize);
 		dev->alt_max_pkt_size[i] =
 		    (tmp & 0x07ff) * (((tmp & 0x1800) >> 11) + 1);
-		em28xx_info("Alternate setting %i, max size= %i\n", i,
+		em28xx_videodbg("Alternate setting %i, max size= %i\n", i,
 						dev->alt_max_pkt_size[i]);
 	}
 
@@ -2388,8 +2423,6 @@ static int em28xx_usb_probe(struct usb_interface *interface,
 		return retval;
 	}
 
-	em28xx_info("Found %s\n", em28xx_boards[dev->model].name);
-
 	/* save our data pointer in this interface device */
 	usb_set_intfdata(interface, dev);
 
diff --git a/linux/drivers/media/video/em28xx/em28xx.h b/linux/drivers/media/video/em28xx/em28xx.h
index 151668c60..4de9a8190 100644
--- a/linux/drivers/media/video/em28xx/em28xx.h
+++ b/linux/drivers/media/video/em28xx/em28xx.h
@@ -99,6 +99,7 @@
 #define EM2883_BOARD_KWORLD_HYBRID_A316		  57
 #define EM2820_BOARD_COMPRO_VIDEOMATE_FORYOU	  58
 #define EM2874_BOARD_PINNACLE_PCTV_80E		  59
+#define EM2883_BOARD_HAUPPAUGE_WINTV_HVR_850	  60
 
 /* Limits minimum and default number of buffers */
 #define EM28XX_MIN_BUF 4
@@ -161,7 +162,7 @@
 #define EM2800_I2C_WRITE_TIMEOUT 20
 
 enum em28xx_mode {
-	EM28XX_MODE_UNDEFINED,
+	EM28XX_SUSPEND,
 	EM28XX_ANALOG_MODE,
 	EM28XX_DIGITAL_MODE,
 };
@@ -305,11 +306,18 @@ enum em28xx_aout {
 	EM28XX_AOUT_SURR   = 1 << 4,
 };
 
+struct em28xx_reg_seq {
+	int reg;
+	unsigned char val, mask;
+	int sleep;
+};
+
 struct em28xx_input {
 	enum enum28xx_itype type;
 	unsigned int vmux;
 	enum em28xx_amux amux;
 	enum em28xx_aout aout;
+	struct em28xx_reg_seq *gpio;
 };
 
 #define INPUT(nr) (&em28xx_boards[dev->model].input[nr])
@@ -317,14 +325,7 @@ struct em28xx_input {
 enum em28xx_decoder {
 	EM28XX_NODECODER,
 	EM28XX_TVP5150,
-	EM28XX_SAA7113,
-	EM28XX_SAA7114
-};
-
-struct em28xx_reg_seq {
-	int reg;
-	unsigned char val, mask;
-	int sleep;
+	EM28XX_SAA711X,
 };
 
 struct em28xx_board {
@@ -336,15 +337,21 @@ struct em28xx_board {
 	/* i2c flags */
 	unsigned int tda9887_conf;
 
+	/* GPIO sequences */
+	struct em28xx_reg_seq *dvb_gpio;
+	struct em28xx_reg_seq *suspend_gpio;
+	struct em28xx_reg_seq *tuner_gpio;
+
 	unsigned int is_em2800:1;
 	unsigned int has_msp34xx:1;
 	unsigned int mts_firmware:1;
-	unsigned int has_12mhz_i2s:1;
 	unsigned int max_range_640_480:1;
 	unsigned int has_dvb:1;
 	unsigned int has_snapshot_button:1;
 	unsigned int valid:1;
 
+	unsigned char xclk, i2c_speed;
+
 	enum em28xx_decoder decoder;
 
 	struct em28xx_input       input[MAX_EM28XX_INPUT];
@@ -425,35 +432,22 @@ struct em28xx {
 	int model;		/* index in the device_data struct */
 	int devno;		/* marks the number of this device */
 	enum em28xx_chip_id chip_id;
-	unsigned int is_em2800:1;
-	unsigned int has_msp34xx:1;
-	unsigned int has_tda9887:1;
+
+	struct em28xx_board board;
+
 	unsigned int stream_on:1;	/* Locks streams */
 	unsigned int has_audio_class:1;
 	unsigned int has_alsa_audio:1;
-	unsigned int has_12mhz_i2s:1;
-	unsigned int max_range_640_480:1;
-	unsigned int has_dvb:1;
-	unsigned int has_snapshot_button:1;
-	unsigned int valid:1;		/* report for validated boards */
 
 	struct em28xx_IR *ir;
 
 	/* Some older em28xx chips needs a waiting time after writing */
 	unsigned int wait_after_write;
 
-	/* GPIO sequences for analog and digital mode */
-	struct em28xx_reg_seq *analog_gpio, *digital_gpio;
-
-	/* GPIO sequences for tuner callbacks */
-	struct em28xx_reg_seq *tun_analog_gpio, *tun_digital_gpio;
-
-	int video_inputs;	/* number of video inputs */
 	struct list_head	devlist;
 
 	u32 i2s_speed;		/* I2S speed for audio digital stream */
 
-	enum em28xx_decoder decoder;
 	struct em28xx_audio_mode audio_mode;
 
 	int tuner_type;		/* type of the tuner */
@@ -536,9 +530,6 @@ struct em28xx {
 	/* Caches GPO and GPIO registers */
 	unsigned char	reg_gpo, reg_gpio;
 
-	/* Infrared remote control support */
-	IR_KEYTAB_TYPE *ir_codes;
-
 	/* Snapshot button */
 	char snapshot_button_path[30];	/* path of the input dev */
 	struct input_dev *sbutton_input_dev;
@@ -640,7 +631,7 @@ int em28xx_ir_fini(struct em28xx *dev);
 static inline int em28xx_compression_disable(struct em28xx *dev)
 {
 	/* side effect of disabling scaler and mixer */
-	return em28xx_write_regs(dev, EM28XX_R26_COMPR, "\x00", 1);
+	return em28xx_write_reg(dev, EM28XX_R26_COMPR, 0x00);
 }
 
 static inline int em28xx_contrast_get(struct em28xx *dev)
@@ -712,7 +703,7 @@ static inline int em28xx_gamma_set(struct em28xx *dev, s32 val)
 /*FIXME: maxw should be dependent of alt mode */
 static inline unsigned int norm_maxw(struct em28xx *dev)
 {
-	if (dev->max_range_640_480)
+	if (dev->board.max_range_640_480)
 		return 640;
 	else
 		return 720;
@@ -720,7 +711,7 @@ static inline unsigned int norm_maxw(struct em28xx *dev)
 
 static inline unsigned int norm_maxh(struct em28xx *dev)
 {
-	if (dev->max_range_640_480)
+	if (dev->board.max_range_640_480)
 		return 480;
 	else
 		return (dev->norm & V4L2_STD_625_50) ? 576 : 480;
diff --git a/linux/drivers/media/video/ivtv/ivtv-i2c.c b/linux/drivers/media/video/ivtv/ivtv-i2c.c
index c251ddb2f..fa18eae17 100644
--- a/linux/drivers/media/video/ivtv/ivtv-i2c.c
+++ b/linux/drivers/media/video/ivtv/ivtv-i2c.c
@@ -550,6 +550,9 @@ static u32 ivtv_functionality(struct i2c_adapter *adap)
 static struct i2c_algorithm ivtv_algo = {
 	.master_xfer   = ivtv_xfer,
 	.functionality = ivtv_functionality,
+#ifdef NEED_ALGO_CONTROL
+	.algo_control = dummy_algo_control,
+#endif
 };
 
 /* template for our-bit banger */
diff --git a/linux/drivers/media/video/mt9m001.c b/linux/drivers/media/video/mt9m001.c
index 228183c54..edacba723 100644
--- a/linux/drivers/media/video/mt9m001.c
+++ b/linux/drivers/media/video/mt9m001.c
@@ -285,8 +285,8 @@ static unsigned long mt9m001_query_bus_param(struct soc_camera_device *icd)
 		width_flag;
 }
 
-static int mt9m001_set_fmt_cap(struct soc_camera_device *icd,
-		__u32 pixfmt, struct v4l2_rect *rect)
+static int mt9m001_set_fmt(struct soc_camera_device *icd,
+			   __u32 pixfmt, struct v4l2_rect *rect)
 {
 	struct mt9m001 *mt9m001 = container_of(icd, struct mt9m001, icd);
 	int ret;
@@ -298,7 +298,7 @@ static int mt9m001_set_fmt_cap(struct soc_camera_device *icd,
 		ret = reg_write(icd, MT9M001_VERTICAL_BLANKING, vblank);
 
 	/* The caller provides a supported format, as verified per
-	 * call to icd->try_fmt_cap() */
+	 * call to icd->try_fmt() */
 	if (!ret)
 		ret = reg_write(icd, MT9M001_COLUMN_START, rect->left);
 	if (!ret)
@@ -325,8 +325,8 @@ static int mt9m001_set_fmt_cap(struct soc_camera_device *icd,
 	return ret;
 }
 
-static int mt9m001_try_fmt_cap(struct soc_camera_device *icd,
-			       struct v4l2_format *f)
+static int mt9m001_try_fmt(struct soc_camera_device *icd,
+			   struct v4l2_format *f)
 {
 	if (f->fmt.pix.height < 32 + icd->y_skip_top)
 		f->fmt.pix.height = 32 + icd->y_skip_top;
@@ -447,8 +447,8 @@ static struct soc_camera_ops mt9m001_ops = {
 	.release		= mt9m001_release,
 	.start_capture		= mt9m001_start_capture,
 	.stop_capture		= mt9m001_stop_capture,
-	.set_fmt_cap		= mt9m001_set_fmt_cap,
-	.try_fmt_cap		= mt9m001_try_fmt_cap,
+	.set_fmt		= mt9m001_set_fmt,
+	.try_fmt		= mt9m001_try_fmt,
 	.set_bus_param		= mt9m001_set_bus_param,
 	.query_bus_param	= mt9m001_query_bus_param,
 	.controls		= mt9m001_controls,
diff --git a/linux/drivers/media/video/mt9m111.c b/linux/drivers/media/video/mt9m111.c
index ceff40edc..1fde94514 100644
--- a/linux/drivers/media/video/mt9m111.c
+++ b/linux/drivers/media/video/mt9m111.c
@@ -452,8 +452,8 @@ static int mt9m111_set_pixfmt(struct soc_camera_device *icd, u32 pixfmt)
 	return ret;
 }
 
-static int mt9m111_set_fmt_cap(struct soc_camera_device *icd,
-			       __u32 pixfmt, struct v4l2_rect *rect)
+static int mt9m111_set_fmt(struct soc_camera_device *icd,
+			   __u32 pixfmt, struct v4l2_rect *rect)
 {
 	struct mt9m111 *mt9m111 = container_of(icd, struct mt9m111, icd);
 	int ret;
@@ -473,8 +473,8 @@ static int mt9m111_set_fmt_cap(struct soc_camera_device *icd,
 	return ret;
 }
 
-static int mt9m111_try_fmt_cap(struct soc_camera_device *icd,
-			       struct v4l2_format *f)
+static int mt9m111_try_fmt(struct soc_camera_device *icd,
+			   struct v4l2_format *f)
 {
 	if (f->fmt.pix.height > MT9M111_MAX_HEIGHT)
 		f->fmt.pix.height = MT9M111_MAX_HEIGHT;
@@ -597,8 +597,8 @@ static struct soc_camera_ops mt9m111_ops = {
 	.release		= mt9m111_release,
 	.start_capture		= mt9m111_start_capture,
 	.stop_capture		= mt9m111_stop_capture,
-	.set_fmt_cap		= mt9m111_set_fmt_cap,
-	.try_fmt_cap		= mt9m111_try_fmt_cap,
+	.set_fmt		= mt9m111_set_fmt,
+	.try_fmt		= mt9m111_try_fmt,
 	.query_bus_param	= mt9m111_query_bus_param,
 	.set_bus_param		= mt9m111_set_bus_param,
 	.controls		= mt9m111_controls,
diff --git a/linux/drivers/media/video/mt9v022.c b/linux/drivers/media/video/mt9v022.c
index bea695a2c..1ca28c087 100644
--- a/linux/drivers/media/video/mt9v022.c
+++ b/linux/drivers/media/video/mt9v022.c
@@ -337,14 +337,14 @@ static unsigned long mt9v022_query_bus_param(struct soc_camera_device *icd)
 		width_flag;
 }
 
-static int mt9v022_set_fmt_cap(struct soc_camera_device *icd,
-		__u32 pixfmt, struct v4l2_rect *rect)
+static int mt9v022_set_fmt(struct soc_camera_device *icd,
+			   __u32 pixfmt, struct v4l2_rect *rect)
 {
 	struct mt9v022 *mt9v022 = container_of(icd, struct mt9v022, icd);
 	int ret;
 
 	/* The caller provides a supported format, as verified per call to
-	 * icd->try_fmt_cap(), datawidth is from our supported format list */
+	 * icd->try_fmt(), datawidth is from our supported format list */
 	switch (pixfmt) {
 	case V4L2_PIX_FMT_GREY:
 	case V4L2_PIX_FMT_Y16:
@@ -400,8 +400,8 @@ static int mt9v022_set_fmt_cap(struct soc_camera_device *icd,
 	return 0;
 }
 
-static int mt9v022_try_fmt_cap(struct soc_camera_device *icd,
-			       struct v4l2_format *f)
+static int mt9v022_try_fmt(struct soc_camera_device *icd,
+			   struct v4l2_format *f)
 {
 	if (f->fmt.pix.height < 32 + icd->y_skip_top)
 		f->fmt.pix.height = 32 + icd->y_skip_top;
@@ -538,8 +538,8 @@ static struct soc_camera_ops mt9v022_ops = {
 	.release		= mt9v022_release,
 	.start_capture		= mt9v022_start_capture,
 	.stop_capture		= mt9v022_stop_capture,
-	.set_fmt_cap		= mt9v022_set_fmt_cap,
-	.try_fmt_cap		= mt9v022_try_fmt_cap,
+	.set_fmt		= mt9v022_set_fmt,
+	.try_fmt		= mt9v022_try_fmt,
 	.set_bus_param		= mt9v022_set_bus_param,
 	.query_bus_param	= mt9v022_query_bus_param,
 	.controls		= mt9v022_controls,
diff --git a/linux/drivers/media/video/ov772x.c b/linux/drivers/media/video/ov772x.c
index 2ddc2ab70..c023bbc84 100644
--- a/linux/drivers/media/video/ov772x.c
+++ b/linux/drivers/media/video/ov772x.c
@@ -112,34 +112,34 @@
 #define AREF7       0x55 /* Analog reference control */
 #define UFIX        0x60 /* U channel fixed value output */
 #define VFIX        0x61 /* V channel fixed value output */
-#define AW_BB_BLK   0x62 /* AWB option for advanced AWB */
-#define AW_B_CTRL0  0x63 /* AWB control byte 0 */
+#define AWBB_BLK    0x62 /* AWB option for advanced AWB */
+#define AWB_CTRL0   0x63 /* AWB control byte 0 */
 #define DSP_CTRL1   0x64 /* DSP control byte 1 */
 #define DSP_CTRL2   0x65 /* DSP control byte 2 */
 #define DSP_CTRL3   0x66 /* DSP control byte 3 */
 #define DSP_CTRL4   0x67 /* DSP control byte 4 */
-#define AW_B_BIAS   0x68 /* AWB BLC level clip */
-#define AW_BCTRL1   0x69 /* AWB control  1 */
-#define AW_BCTRL2   0x6A /* AWB control  2 */
-#define AW_BCTRL3   0x6B /* AWB control  3 */
-#define AW_BCTRL4   0x6C /* AWB control  4 */
-#define AW_BCTRL5   0x6D /* AWB control  5 */
-#define AW_BCTRL6   0x6E /* AWB control  6 */
-#define AW_BCTRL7   0x6F /* AWB control  7 */
-#define AW_BCTRL8   0x70 /* AWB control  8 */
-#define AW_BCTRL9   0x71 /* AWB control  9 */
-#define AW_BCTRL10  0x72 /* AWB control 10 */
-#define AW_BCTRL11  0x73 /* AWB control 11 */
-#define AW_BCTRL12  0x74 /* AWB control 12 */
-#define AW_BCTRL13  0x75 /* AWB control 13 */
-#define AW_BCTRL14  0x76 /* AWB control 14 */
-#define AW_BCTRL15  0x77 /* AWB control 15 */
-#define AW_BCTRL16  0x78 /* AWB control 16 */
-#define AW_BCTRL17  0x79 /* AWB control 17 */
-#define AW_BCTRL18  0x7A /* AWB control 18 */
-#define AW_BCTRL19  0x7B /* AWB control 19 */
-#define AW_BCTRL20  0x7C /* AWB control 20 */
-#define AW_BCTRL21  0x7D /* AWB control 21 */
+#define AWB_BIAS    0x68 /* AWB BLC level clip */
+#define AWB_CTRL1   0x69 /* AWB control  1 */
+#define AWB_CTRL2   0x6A /* AWB control  2 */
+#define AWB_CTRL3   0x6B /* AWB control  3 */
+#define AWB_CTRL4   0x6C /* AWB control  4 */
+#define AWB_CTRL5   0x6D /* AWB control  5 */
+#define AWB_CTRL6   0x6E /* AWB control  6 */
+#define AWB_CTRL7   0x6F /* AWB control  7 */
+#define AWB_CTRL8   0x70 /* AWB control  8 */
+#define AWB_CTRL9   0x71 /* AWB control  9 */
+#define AWB_CTRL10  0x72 /* AWB control 10 */
+#define AWB_CTRL11  0x73 /* AWB control 11 */
+#define AWB_CTRL12  0x74 /* AWB control 12 */
+#define AWB_CTRL13  0x75 /* AWB control 13 */
+#define AWB_CTRL14  0x76 /* AWB control 14 */
+#define AWB_CTRL15  0x77 /* AWB control 15 */
+#define AWB_CTRL16  0x78 /* AWB control 16 */
+#define AWB_CTRL17  0x79 /* AWB control 17 */
+#define AWB_CTRL18  0x7A /* AWB control 18 */
+#define AWB_CTRL19  0x7B /* AWB control 19 */
+#define AWB_CTRL20  0x7C /* AWB control 20 */
+#define AWB_CTRL21  0x7D /* AWB control 21 */
 #define GAM1        0x7E /* Gamma Curve  1st segment input end point */
 #define GAM2        0x7F /* Gamma Curve  2nd segment input end point */
 #define GAM3        0x80 /* Gamma Curve  3rd segment input end point */
@@ -593,12 +593,30 @@ static int ov772x_reset(struct i2c_client *client)
 
 static int ov772x_init(struct soc_camera_device *icd)
 {
-	return 0;
+	struct ov772x_priv *priv = container_of(icd, struct ov772x_priv, icd);
+	int ret = 0;
+
+	if (priv->info->link.power) {
+		ret = priv->info->link.power(&priv->client->dev, 1);
+		if (ret < 0)
+			return ret;
+	}
+
+	if (priv->info->link.reset)
+		ret = priv->info->link.reset(&priv->client->dev);
+
+	return ret;
 }
 
 static int ov772x_release(struct soc_camera_device *icd)
 {
-	return 0;
+	struct ov772x_priv *priv = container_of(icd, struct ov772x_priv, icd);
+	int ret = 0;
+
+	if (priv->info->link.power)
+		ret = priv->info->link.power(&priv->client->dev, 0);
+
+	return ret;
 }
 
 static int ov772x_start_capture(struct soc_camera_device *icd)
@@ -737,9 +755,9 @@ static int ov772x_set_register(struct soc_camera_device *icd,
 }
 #endif
 
-static int ov772x_set_fmt_cap(struct soc_camera_device *icd,
-			      __u32                     pixfmt,
-			      struct v4l2_rect         *rect)
+static int ov772x_set_fmt(struct soc_camera_device *icd,
+			  __u32                     pixfmt,
+			  struct v4l2_rect         *rect)
 {
 	struct ov772x_priv *priv = container_of(icd, struct ov772x_priv, icd);
 	int ret = -EINVAL;
@@ -760,8 +778,8 @@ static int ov772x_set_fmt_cap(struct soc_camera_device *icd,
 	return ret;
 }
 
-static int ov772x_try_fmt_cap(struct soc_camera_device *icd,
-			      struct v4l2_format       *f)
+static int ov772x_try_fmt(struct soc_camera_device *icd,
+			  struct v4l2_format       *f)
 {
 	struct v4l2_pix_format *pix  = &f->fmt.pix;
 	struct ov772x_priv     *priv;
@@ -814,9 +832,6 @@ static int ov772x_video_probe(struct soc_camera_device *icd)
 	icd->formats     = ov772x_fmt_lists;
 	icd->num_formats = ARRAY_SIZE(ov772x_fmt_lists);
 
-	if (priv->info->link.power)
-		priv->info->link.power(&priv->client->dev, 1);
-
 	/*
 	 * check and show product ID and manufacturer ID
 	 */
@@ -824,8 +839,8 @@ static int ov772x_video_probe(struct soc_camera_device *icd)
 	ver = i2c_smbus_read_byte_data(priv->client, VER);
 	if (pid != 0x77 ||
 	    ver != 0x21) {
-		if (priv->info->link.power)
-			priv->info->link.power(&priv->client->dev, 0);
+		dev_err(&icd->dev,
+			"Product ID error %x:%x\n", pid, ver);
 		return -ENODEV;
 	}
 
@@ -842,13 +857,7 @@ static int ov772x_video_probe(struct soc_camera_device *icd)
 
 static void ov772x_video_remove(struct soc_camera_device *icd)
 {
-	struct ov772x_priv *priv = container_of(icd, struct ov772x_priv, icd);
-
 	soc_camera_video_stop(icd);
-
-	if (priv->info->link.power)
-		priv->info->link.power(&priv->client->dev, 0);
-
 }
 
 static struct soc_camera_ops ov772x_ops = {
@@ -859,8 +868,8 @@ static struct soc_camera_ops ov772x_ops = {
 	.release		= ov772x_release,
 	.start_capture		= ov772x_start_capture,
 	.stop_capture		= ov772x_stop_capture,
-	.set_fmt_cap		= ov772x_set_fmt_cap,
-	.try_fmt_cap		= ov772x_try_fmt_cap,
+	.set_fmt		= ov772x_set_fmt,
+	.try_fmt		= ov772x_try_fmt,
 	.set_bus_param		= ov772x_set_bus_param,
 	.query_bus_param	= ov772x_query_bus_param,
 	.get_chip_id		= ov772x_get_chip_id,
diff --git a/linux/drivers/media/video/pvrusb2/pvrusb2-i2c-core.c b/linux/drivers/media/video/pvrusb2/pvrusb2-i2c-core.c
index edce8fc34..877c8f7b1 100644
--- a/linux/drivers/media/video/pvrusb2/pvrusb2-i2c-core.c
+++ b/linux/drivers/media/video/pvrusb2/pvrusb2-i2c-core.c
@@ -1013,6 +1013,9 @@ static int pvr2_i2c_detach_inform(struct i2c_client *client)
 static struct i2c_algorithm pvr2_i2c_algo_template = {
 	.master_xfer   = pvr2_i2c_xfer,
 	.functionality = pvr2_i2c_functionality,
+#ifdef NEED_ALGO_CONTROL
+	.algo_control = dummy_algo_control,
+#endif
 };
 
 static struct i2c_adapter pvr2_i2c_adap_template = {
diff --git a/linux/drivers/media/video/pxa_camera.c b/linux/drivers/media/video/pxa_camera.c
index 08723ed84..210a99780 100644
--- a/linux/drivers/media/video/pxa_camera.c
+++ b/linux/drivers/media/video/pxa_camera.c
@@ -770,6 +770,9 @@ static int test_platform_param(struct pxa_camera_dev *pcdev,
 		if (!(pcdev->platform_flags & PXA_CAMERA_DATAWIDTH_8))
 			return -EINVAL;
 		*flags |= SOCAM_DATAWIDTH_8;
+		break;
+	default:
+		return -EINVAL;
 	}
 
 	return 0;
@@ -828,12 +831,10 @@ static int pxa_camera_set_bus_param(struct soc_camera_device *icd, __u32 pixfmt)
 	 * We fix bit-per-pixel equal to data-width... */
 	switch (common_flags & SOCAM_DATAWIDTH_MASK) {
 	case SOCAM_DATAWIDTH_10:
-		icd->buswidth = 10;
 		dw = 4;
 		bpp = 0x40;
 		break;
 	case SOCAM_DATAWIDTH_9:
-		icd->buswidth = 9;
 		dw = 3;
 		bpp = 0x20;
 		break;
@@ -841,7 +842,6 @@ static int pxa_camera_set_bus_param(struct soc_camera_device *icd, __u32 pixfmt)
 		/* Actually it can only be 8 now,
 		 * default is just to silence compiler warnings */
 	case SOCAM_DATAWIDTH_8:
-		icd->buswidth = 8;
 		dw = 2;
 		bpp = 0;
 	}
@@ -867,7 +867,17 @@ static int pxa_camera_set_bus_param(struct soc_camera_device *icd, __u32 pixfmt)
 	case V4L2_PIX_FMT_YUV422P:
 		pcdev->channels = 3;
 		cicr1 |= CICR1_YCBCR_F;
+		/*
+		 * Normally, pxa bus wants as input UYVY format. We allow all
+		 * reorderings of the YUV422 format, as no processing is done,
+		 * and the YUV stream is just passed through without any
+		 * transformation. Note that UYVY is the only format that
+		 * should be used if pxa framebuffer Overlay2 is used.
+		 */
+	case V4L2_PIX_FMT_UYVY:
+	case V4L2_PIX_FMT_VYUY:
 	case V4L2_PIX_FMT_YUYV:
+	case V4L2_PIX_FMT_YVYU:
 		cicr1 |= CICR1_COLOR_SP_VAL(2);
 		break;
 	case V4L2_PIX_FMT_RGB555:
@@ -893,13 +903,14 @@ static int pxa_camera_set_bus_param(struct soc_camera_device *icd, __u32 pixfmt)
 	return 0;
 }
 
-static int pxa_camera_try_bus_param(struct soc_camera_device *icd, __u32 pixfmt)
+static int pxa_camera_try_bus_param(struct soc_camera_device *icd,
+				    unsigned char buswidth)
 {
 	struct soc_camera_host *ici =
 		to_soc_camera_host(icd->dev.parent);
 	struct pxa_camera_dev *pcdev = ici->priv;
 	unsigned long bus_flags, camera_flags;
-	int ret = test_platform_param(pcdev, icd->buswidth, &bus_flags);
+	int ret = test_platform_param(pcdev, buswidth, &bus_flags);
 
 	if (ret < 0)
 		return ret;
@@ -909,28 +920,174 @@ static int pxa_camera_try_bus_param(struct soc_camera_device *icd, __u32 pixfmt)
 	return soc_camera_bus_param_compatible(camera_flags, bus_flags) ? 0 : -EINVAL;
 }
 
-static int pxa_camera_set_fmt_cap(struct soc_camera_device *icd,
-				  __u32 pixfmt, struct v4l2_rect *rect)
+static const struct soc_camera_data_format pxa_camera_formats[] = {
+	{
+		.name		= "Planar YUV422 16 bit",
+		.depth		= 16,
+		.fourcc		= V4L2_PIX_FMT_YUV422P,
+		.colorspace	= V4L2_COLORSPACE_JPEG,
+	},
+};
+
+static bool buswidth_supported(struct soc_camera_device *icd, int depth)
+{
+	struct soc_camera_host *ici = to_soc_camera_host(icd->dev.parent);
+	struct pxa_camera_dev *pcdev = ici->priv;
+
+	switch (depth) {
+	case 8:
+		return !!(pcdev->platform_flags & PXA_CAMERA_DATAWIDTH_8);
+	case 9:
+		return !!(pcdev->platform_flags & PXA_CAMERA_DATAWIDTH_9);
+	case 10:
+		return !!(pcdev->platform_flags & PXA_CAMERA_DATAWIDTH_10);
+	}
+	return false;
+}
+
+static int required_buswidth(const struct soc_camera_data_format *fmt)
+{
+	switch (fmt->fourcc) {
+	case V4L2_PIX_FMT_UYVY:
+	case V4L2_PIX_FMT_VYUY:
+	case V4L2_PIX_FMT_YUYV:
+	case V4L2_PIX_FMT_YVYU:
+	case V4L2_PIX_FMT_RGB565:
+	case V4L2_PIX_FMT_RGB555:
+		return 8;
+	default:
+		return fmt->depth;
+	}
+}
+
+static int pxa_camera_get_formats(struct soc_camera_device *icd, int idx,
+				  struct soc_camera_format_xlate *xlate)
+{
+	struct soc_camera_host *ici = to_soc_camera_host(icd->dev.parent);
+	int formats = 0, buswidth, ret;
+
+	buswidth = required_buswidth(icd->formats + idx);
+
+	if (!buswidth_supported(icd, buswidth))
+		return 0;
+
+	ret = pxa_camera_try_bus_param(icd, buswidth);
+	if (ret < 0)
+		return 0;
+
+	switch (icd->formats[idx].fourcc) {
+	case V4L2_PIX_FMT_UYVY:
+		formats++;
+		if (xlate) {
+			xlate->host_fmt = &pxa_camera_formats[0];
+			xlate->cam_fmt = icd->formats + idx;
+			xlate->buswidth = buswidth;
+			xlate++;
+			dev_dbg(&ici->dev, "Providing format %s using %s\n",
+				pxa_camera_formats[0].name,
+				icd->formats[idx].name);
+		}
+	case V4L2_PIX_FMT_VYUY:
+	case V4L2_PIX_FMT_YUYV:
+	case V4L2_PIX_FMT_YVYU:
+	case V4L2_PIX_FMT_RGB565:
+	case V4L2_PIX_FMT_RGB555:
+		formats++;
+		if (xlate) {
+			xlate->host_fmt = icd->formats + idx;
+			xlate->cam_fmt = icd->formats + idx;
+			xlate->buswidth = buswidth;
+			xlate++;
+			dev_dbg(&ici->dev, "Providing format %s packed\n",
+				icd->formats[idx].name);
+		}
+		break;
+	default:
+		/* Generic pass-through */
+		formats++;
+		if (xlate) {
+			xlate->host_fmt = icd->formats + idx;
+			xlate->cam_fmt = icd->formats + idx;
+			xlate->buswidth = icd->formats[idx].depth;
+			xlate++;
+			dev_dbg(&ici->dev,
+				"Providing format %s in pass-through mode\n",
+				icd->formats[idx].name);
+		}
+	}
+
+	return formats;
+}
+
+static int pxa_camera_set_fmt(struct soc_camera_device *icd,
+			      __u32 pixfmt, struct v4l2_rect *rect)
 {
-	return icd->ops->set_fmt_cap(icd, pixfmt, rect);
+	struct soc_camera_host *ici = to_soc_camera_host(icd->dev.parent);
+	const struct soc_camera_data_format *host_fmt, *cam_fmt = NULL;
+	const struct soc_camera_format_xlate *xlate;
+	int ret, buswidth;
+
+	xlate = soc_camera_xlate_by_fourcc(icd, pixfmt);
+	if (!xlate) {
+		dev_warn(&ici->dev, "Format %x not found\n", pixfmt);
+		return -EINVAL;
+	}
+
+	buswidth = xlate->buswidth;
+	host_fmt = xlate->host_fmt;
+	cam_fmt = xlate->cam_fmt;
+
+	switch (pixfmt) {
+	case 0:				/* Only geometry change */
+		ret = icd->ops->set_fmt(icd, pixfmt, rect);
+		break;
+	default:
+		ret = icd->ops->set_fmt(icd, cam_fmt->fourcc, rect);
+	}
+
+	if (ret < 0)
+		dev_warn(&ici->dev, "Failed to configure for format %x\n",
+			 pixfmt);
+
+	if (pixfmt && !ret) {
+		icd->buswidth = buswidth;
+		icd->current_fmt = host_fmt;
+	}
+
+	return ret;
 }
 
-static int pxa_camera_try_fmt_cap(struct soc_camera_device *icd,
-				  struct v4l2_format *f)
+static int pxa_camera_try_fmt(struct soc_camera_device *icd,
+			      struct v4l2_format *f)
 {
+	struct soc_camera_host *ici = to_soc_camera_host(icd->dev.parent);
+	const struct soc_camera_format_xlate *xlate;
+	struct v4l2_pix_format *pix = &f->fmt.pix;
+	__u32 pixfmt = pix->pixelformat;
+
+	xlate = soc_camera_xlate_by_fourcc(icd, pixfmt);
+	if (!xlate) {
+		dev_warn(&ici->dev, "Format %x not found\n", pixfmt);
+		return -EINVAL;
+	}
+
 	/* limit to pxa hardware capabilities */
-	if (f->fmt.pix.height < 32)
-		f->fmt.pix.height = 32;
-	if (f->fmt.pix.height > 2048)
-		f->fmt.pix.height = 2048;
-	if (f->fmt.pix.width < 48)
-		f->fmt.pix.width = 48;
-	if (f->fmt.pix.width > 2048)
-		f->fmt.pix.width = 2048;
-	f->fmt.pix.width &= ~0x01;
+	if (pix->height < 32)
+		pix->height = 32;
+	if (pix->height > 2048)
+		pix->height = 2048;
+	if (pix->width < 48)
+		pix->width = 48;
+	if (pix->width > 2048)
+		pix->width = 2048;
+	pix->width &= ~0x01;
+
+	pix->bytesperline = pix->width *
+		DIV_ROUND_UP(xlate->host_fmt->depth, 8);
+	pix->sizeimage = pix->height * pix->bytesperline;
 
 	/* limit to sensor capabilities */
-	return icd->ops->try_fmt_cap(icd, f);
+	return icd->ops->try_fmt(icd, f);
 }
 
 static int pxa_camera_reqbufs(struct soc_camera_file *icf,
@@ -1038,13 +1195,13 @@ static struct soc_camera_host_ops pxa_soc_camera_host_ops = {
 	.remove		= pxa_camera_remove_device,
 	.suspend	= pxa_camera_suspend,
 	.resume		= pxa_camera_resume,
-	.set_fmt_cap	= pxa_camera_set_fmt_cap,
-	.try_fmt_cap	= pxa_camera_try_fmt_cap,
+	.get_formats	= pxa_camera_get_formats,
+	.set_fmt	= pxa_camera_set_fmt,
+	.try_fmt	= pxa_camera_try_fmt,
 	.init_videobuf	= pxa_camera_init_videobuf,
 	.reqbufs	= pxa_camera_reqbufs,
 	.poll		= pxa_camera_poll,
 	.querycap	= pxa_camera_querycap,
-	.try_bus_param	= pxa_camera_try_bus_param,
 	.set_bus_param	= pxa_camera_set_bus_param,
 };
 
diff --git a/linux/drivers/media/video/saa7134/saa7134-cards.c b/linux/drivers/media/video/saa7134/saa7134-cards.c
index d4c432cb3..54be8314f 100644
--- a/linux/drivers/media/video/saa7134/saa7134-cards.c
+++ b/linux/drivers/media/video/saa7134/saa7134-cards.c
@@ -4645,6 +4645,43 @@ struct saa7134_board saa7134_boards[] = {
 			.gpio   = 0x0200000,
 		},
 	},
+	[SAA7134_BOARD_KWORLD_PLUS_TV_ANALOG] = {
+		.name           = "Kworld Plus TV Analog Lite PCI",
+		.audio_clock    = 0x00187de7,
+		.tuner_type     = TUNER_YMEC_TVF_5533MF,
+		.radio_type     = TUNER_TEA5767,
+		.tuner_addr     = ADDR_UNSET,
+		.radio_addr     = ADDR_UNSET,
+		.gpiomask       = 0x80000700,
+		.inputs = { {
+			.name   = name_tv,
+			.vmux   = 1,
+			.amux   = LINE2,
+			.tv     = 1,
+			.gpio   = 0x100,
+		}, {
+			.name   = name_comp1,
+			.vmux   = 3,
+			.amux   = LINE1,
+			.gpio   = 0x200,
+		}, {
+			.name   = name_svideo,
+			.vmux   = 8,
+			.amux   = LINE1,
+			.gpio   = 0x200,
+		} },
+		.radio = {
+			.name   = name_radio,
+			.vmux   = 1,
+			.amux   = LINE1,
+			.gpio   = 0x100,
+		},
+		.mute = {
+			.name = name_mute,
+			.vmux = 8,
+			.amux = 2,
+		},
+	},
 };
 
 const unsigned int saa7134_bcount = ARRAY_SIZE(saa7134_boards);
@@ -4775,6 +4812,12 @@ struct pci_device_id saa7134_pci_tbl[] = {
 		.driver_data  = SAA7134_BOARD_MD7134,
 	},{
 		.vendor       = PCI_VENDOR_ID_PHILIPS,
+		.device       = PCI_DEVICE_ID_PHILIPS_SAA7134,
+		.subvendor    = 0x16be, /* CTX946 analog TV, HW mpeg, DVB-T */
+		.subdevice    = 0x5000, /* only analog TV and DVB-T for now */
+		.driver_data  = SAA7134_BOARD_MD7134,
+	}, {
+		.vendor       = PCI_VENDOR_ID_PHILIPS,
 		.device       = PCI_DEVICE_ID_PHILIPS_SAA7130,
 		.subvendor    = 0x1048,
 		.subdevice    = 0x226b,
@@ -5692,6 +5735,12 @@ struct pci_device_id saa7134_pci_tbl[] = {
 		.subdevice    = 0x4878, /* REV:1.02G */
 		.driver_data  = SAA7134_BOARD_ASUSTeK_TIGER_3IN1,
 	}, {
+		.vendor       = PCI_VENDOR_ID_PHILIPS,
+		.device       = PCI_DEVICE_ID_PHILIPS_SAA7134,
+		.subvendor    = 0x17de,
+		.subdevice    = 0x7128,
+		.driver_data  = SAA7134_BOARD_KWORLD_PLUS_TV_ANALOG,
+	}, {
 		/* --- boards without eeprom + subsystem ID --- */
 		.vendor       = PCI_VENDOR_ID_PHILIPS,
 		.device       = PCI_DEVICE_ID_PHILIPS_SAA7134,
@@ -5979,6 +6028,7 @@ int saa7134_board_init1(struct saa7134_dev *dev)
 	case SAA7134_BOARD_BEHOLD_507_9FM:
 	case SAA7134_BOARD_GENIUS_TVGO_A11MCE:
 	case SAA7134_BOARD_REAL_ANGEL_220:
+	case SAA7134_BOARD_KWORLD_PLUS_TV_ANALOG:
 		dev->has_remote = SAA7134_REMOTE_GPIO;
 		break;
 	case SAA7134_BOARD_FLYDVBS_LR300:
diff --git a/linux/drivers/media/video/saa7134/saa7134-i2c.c b/linux/drivers/media/video/saa7134/saa7134-i2c.c
index df97ac987..3f7d4eb80 100644
--- a/linux/drivers/media/video/saa7134/saa7134-i2c.c
+++ b/linux/drivers/media/video/saa7134/saa7134-i2c.c
@@ -358,6 +358,9 @@ static int attach_inform(struct i2c_client *client)
 static struct i2c_algorithm saa7134_algo = {
 	.master_xfer   = saa7134_i2c_xfer,
 	.functionality = functionality,
+#ifdef NEED_ALGO_CONTROL
+	.algo_control = dummy_algo_control,
+#endif
 };
 
 static struct i2c_adapter saa7134_adap_template = {
diff --git a/linux/drivers/media/video/saa7134/saa7134-input.c b/linux/drivers/media/video/saa7134/saa7134-input.c
index 1c4bd413e..272490b92 100644
--- a/linux/drivers/media/video/saa7134/saa7134-input.c
+++ b/linux/drivers/media/video/saa7134/saa7134-input.c
@@ -97,6 +97,15 @@ static int build_key(struct saa7134_dev *dev)
 	dprintk("build_key gpio=0x%x mask=0x%x data=%d\n",
 		gpio, ir->mask_keycode, data);
 
+	switch (dev->board) {
+	case SAA7134_BOARD_KWORLD_PLUS_TV_ANALOG:
+		if (data == ir->mask_keycode)
+			ir_input_nokey(ir->dev, &ir->ir);
+		else
+			ir_input_keydown(ir->dev, &ir->ir, data, data);
+		return 0;
+	}
+
 	if (ir->polling) {
 		if ((ir->mask_keydown  &&  (0 != (gpio & ir->mask_keydown))) ||
 		    (ir->mask_keyup    &&  (0 == (gpio & ir->mask_keyup)))) {
@@ -586,6 +595,11 @@ int saa7134_input_init1(struct saa7134_dev *dev)
 		mask_keyup   = 0x4000;
 		polling = 50; /* ms */
 		break;
+	case SAA7134_BOARD_KWORLD_PLUS_TV_ANALOG:
+		ir_codes     = ir_codes_kworld_plus_tv_analog;
+		mask_keycode = 0x7f;
+		polling = 40; /* ms */
+		break;
 	}
 	if (NULL == ir_codes) {
 		printk("%s: Oops: IR config error [card=%d]\n",
diff --git a/linux/drivers/media/video/saa7134/saa7134.h b/linux/drivers/media/video/saa7134/saa7134.h
index 82f9a889a..3bb599673 100644
--- a/linux/drivers/media/video/saa7134/saa7134.h
+++ b/linux/drivers/media/video/saa7134/saa7134.h
@@ -276,6 +276,7 @@ struct saa7134_format {
 #define SAA7134_BOARD_REAL_ANGEL_220     150
 #define SAA7134_BOARD_ADS_INSTANT_HDTV_PCI  151
 #define SAA7134_BOARD_ASUSTeK_TIGER         152
+#define SAA7134_BOARD_KWORLD_PLUS_TV_ANALOG 153
 
 #define SAA7134_MAXBOARDS 32
 #define SAA7134_INPUT_MAX 8
diff --git a/linux/drivers/media/video/sh_mobile_ceu_camera.c b/linux/drivers/media/video/sh_mobile_ceu_camera.c
index 2fb8bee0b..e2e816213 100644
--- a/linux/drivers/media/video/sh_mobile_ceu_camera.c
+++ b/linux/drivers/media/video/sh_mobile_ceu_camera.c
@@ -445,15 +445,46 @@ static int sh_mobile_ceu_try_bus_param(struct soc_camera_device *icd,
 	return 0;
 }
 
-static int sh_mobile_ceu_set_fmt_cap(struct soc_camera_device *icd,
-				     __u32 pixfmt, struct v4l2_rect *rect)
+static int sh_mobile_ceu_set_fmt(struct soc_camera_device *icd,
+				 __u32 pixfmt, struct v4l2_rect *rect)
 {
-	return icd->ops->set_fmt_cap(icd, pixfmt, rect);
+	const struct soc_camera_data_format *cam_fmt;
+	int ret;
+
+	/*
+	 * TODO: find a suitable supported by the SoC output format, check
+	 * whether the sensor supports one of acceptable input formats.
+	 */
+	if (pixfmt) {
+		cam_fmt = soc_camera_format_by_fourcc(icd, pixfmt);
+		if (!cam_fmt)
+			return -EINVAL;
+	}
+
+	ret = icd->ops->set_fmt(icd, pixfmt, rect);
+	if (pixfmt && !ret)
+		icd->current_fmt = cam_fmt;
+
+	return ret;
 }
 
-static int sh_mobile_ceu_try_fmt_cap(struct soc_camera_device *icd,
-				     struct v4l2_format *f)
+static int sh_mobile_ceu_try_fmt(struct soc_camera_device *icd,
+				 struct v4l2_format *f)
 {
+	const struct soc_camera_data_format *cam_fmt;
+	int ret = sh_mobile_ceu_try_bus_param(icd, f->fmt.pix.pixelformat);
+
+	if (ret < 0)
+		return ret;
+
+	/*
+	 * TODO: find a suitable supported by the SoC output format, check
+	 * whether the sensor supports one of acceptable input formats.
+	 */
+	cam_fmt = soc_camera_format_by_fourcc(icd, f->fmt.pix.pixelformat);
+	if (!cam_fmt)
+		return -EINVAL;
+
 	/* FIXME: calculate using depth and bus width */
 
 	if (f->fmt.pix.height < 4)
@@ -467,8 +498,12 @@ static int sh_mobile_ceu_try_fmt_cap(struct soc_camera_device *icd,
 	f->fmt.pix.width &= ~0x01;
 	f->fmt.pix.height &= ~0x03;
 
+	f->fmt.pix.bytesperline = f->fmt.pix.width *
+		DIV_ROUND_UP(cam_fmt->depth, 8);
+	f->fmt.pix.sizeimage = f->fmt.pix.height * f->fmt.pix.bytesperline;
+
 	/* limit to sensor capabilities */
-	return icd->ops->try_fmt_cap(icd, f);
+	return icd->ops->try_fmt(icd, f);
 }
 
 static int sh_mobile_ceu_reqbufs(struct soc_camera_file *icf,
@@ -536,12 +571,11 @@ static struct soc_camera_host_ops sh_mobile_ceu_host_ops = {
 	.owner		= THIS_MODULE,
 	.add		= sh_mobile_ceu_add_device,
 	.remove		= sh_mobile_ceu_remove_device,
-	.set_fmt_cap	= sh_mobile_ceu_set_fmt_cap,
-	.try_fmt_cap	= sh_mobile_ceu_try_fmt_cap,
+	.set_fmt	= sh_mobile_ceu_set_fmt,
+	.try_fmt	= sh_mobile_ceu_try_fmt,
 	.reqbufs	= sh_mobile_ceu_reqbufs,
 	.poll		= sh_mobile_ceu_poll,
 	.querycap	= sh_mobile_ceu_querycap,
-	.try_bus_param	= sh_mobile_ceu_try_bus_param,
 	.set_bus_param	= sh_mobile_ceu_set_bus_param,
 	.init_videobuf	= sh_mobile_ceu_init_videobuf,
 };
diff --git a/linux/drivers/media/video/soc_camera.c b/linux/drivers/media/video/soc_camera.c
index 7a46697c4..4a9c52c37 100644
--- a/linux/drivers/media/video/soc_camera.c
+++ b/linux/drivers/media/video/soc_camera.c
@@ -36,8 +36,8 @@ static LIST_HEAD(devices);
 static DEFINE_MUTEX(list_lock);
 static DEFINE_MUTEX(video_lock);
 
-const static struct soc_camera_data_format*
-format_by_fourcc(struct soc_camera_device *icd, unsigned int fourcc)
+const struct soc_camera_data_format *soc_camera_format_by_fourcc(
+	struct soc_camera_device *icd, unsigned int fourcc)
 {
 	unsigned int i;
 
@@ -46,52 +46,47 @@ format_by_fourcc(struct soc_camera_device *icd, unsigned int fourcc)
 			return icd->formats + i;
 	return NULL;
 }
+EXPORT_SYMBOL(soc_camera_format_by_fourcc);
+
+const struct soc_camera_format_xlate *soc_camera_xlate_by_fourcc(
+	struct soc_camera_device *icd, unsigned int fourcc)
+{
+	unsigned int i;
+
+	for (i = 0; i < icd->num_user_formats; i++)
+		if (icd->user_formats[i].host_fmt->fourcc == fourcc)
+			return icd->user_formats + i;
+	return NULL;
+}
+EXPORT_SYMBOL(soc_camera_xlate_by_fourcc);
 
 static int soc_camera_try_fmt_vid_cap(struct file *file, void *priv,
-				  struct v4l2_format *f)
+				      struct v4l2_format *f)
 {
 	struct soc_camera_file *icf = file->private_data;
 	struct soc_camera_device *icd = icf->icd;
 	struct soc_camera_host *ici =
 		to_soc_camera_host(icd->dev.parent);
 	enum v4l2_field field;
-	const struct soc_camera_data_format *fmt;
 	int ret;
 
 	WARN_ON(priv != file->private_data);
 
-	fmt = format_by_fourcc(icd, f->fmt.pix.pixelformat);
-	if (!fmt) {
-		dev_dbg(&icd->dev, "invalid format 0x%08x\n",
-			f->fmt.pix.pixelformat);
-		return -EINVAL;
-	}
-
-	dev_dbg(&icd->dev, "fmt: 0x%08x\n", fmt->fourcc);
-
+	/*
+	 * TODO: this might also have to migrate to host-drivers, if anyone
+	 * wishes to support other fields
+	 */
 	field = f->fmt.pix.field;
 
 	if (field == V4L2_FIELD_ANY) {
-		field = V4L2_FIELD_NONE;
-	} else if (V4L2_FIELD_NONE != field) {
+		f->fmt.pix.field = V4L2_FIELD_NONE;
+	} else if (field != V4L2_FIELD_NONE) {
 		dev_err(&icd->dev, "Field type invalid.\n");
 		return -EINVAL;
 	}
 
-	/* test physical bus parameters */
-	ret = ici->ops->try_bus_param(icd, f->fmt.pix.pixelformat);
-	if (ret)
-		return ret;
-
 	/* limit format to hardware capabilities */
-	ret = ici->ops->try_fmt_cap(icd, f);
-
-	/* calculate missing fields */
-	f->fmt.pix.field = field;
-	f->fmt.pix.bytesperline =
-		(f->fmt.pix.width * fmt->depth) >> 3;
-	f->fmt.pix.sizeimage =
-		f->fmt.pix.height * f->fmt.pix.bytesperline;
+	ret = ici->ops->try_fmt(icd, f);
 
 	return ret;
 }
@@ -179,6 +174,59 @@ static int soc_camera_dqbuf(struct file *file, void *priv,
 	return videobuf_dqbuf(&icf->vb_vidq, p, file->f_flags & O_NONBLOCK);
 }
 
+static int soc_camera_init_user_formats(struct soc_camera_device *icd)
+{
+	struct soc_camera_host *ici = to_soc_camera_host(icd->dev.parent);
+	int i, fmts = 0;
+
+	if (!ici->ops->get_formats)
+		/*
+		 * Fallback mode - the host will have to serve all
+		 * sensor-provided formats one-to-one to the user
+		 */
+		fmts = icd->num_formats;
+	else
+		/*
+		 * First pass - only count formats this host-sensor
+		 * configuration can provide
+		 */
+		for (i = 0; i < icd->num_formats; i++)
+			fmts += ici->ops->get_formats(icd, i, NULL);
+
+	if (!fmts)
+		return -ENXIO;
+
+	icd->user_formats =
+		vmalloc(fmts * sizeof(struct soc_camera_format_xlate));
+	if (!icd->user_formats)
+		return -ENOMEM;
+
+	icd->num_user_formats = fmts;
+	fmts = 0;
+
+	dev_dbg(&icd->dev, "Found %d supported formats.\n", fmts);
+
+	/* Second pass - actually fill data formats */
+	for (i = 0; i < icd->num_formats; i++)
+		if (!ici->ops->get_formats) {
+			icd->user_formats[i].host_fmt = icd->formats + i;
+			icd->user_formats[i].cam_fmt = icd->formats + i;
+			icd->user_formats[i].buswidth = icd->formats[i].depth;
+		} else {
+			fmts += ici->ops->get_formats(icd, i,
+						      &icd->user_formats[fmts]);
+		}
+
+	icd->current_fmt = icd->user_formats[0].host_fmt;
+
+	return 0;
+}
+
+static void soc_camera_free_user_formats(struct soc_camera_device *icd)
+{
+	vfree(icd->user_formats);
+}
+
 static int soc_camera_open(struct inode *inode, struct file *file)
 {
 	struct video_device *vdev;
@@ -215,10 +263,12 @@ static int soc_camera_open(struct inode *inode, struct file *file)
 
 	/* Now we really have to activate the camera */
 	if (icd->use_count == 1) {
+		ret = soc_camera_init_user_formats(icd);
+		if (ret < 0)
+			goto eiufmt;
 		ret = ici->ops->add(icd);
 		if (ret < 0) {
 			dev_err(&icd->dev, "Couldn't activate the camera: %d\n", ret);
-			icd->use_count--;
 			goto eiciadd;
 		}
 	}
@@ -234,6 +284,9 @@ static int soc_camera_open(struct inode *inode, struct file *file)
 
 	/* All errors are entered with the video_lock held */
 eiciadd:
+	soc_camera_free_user_formats(icd);
+eiufmt:
+	icd->use_count--;
 	module_put(ici->ops->owner);
 emgi:
 	module_put(icd->ops->owner);
@@ -252,8 +305,10 @@ static int soc_camera_close(struct inode *inode, struct file *file)
 
 	mutex_lock(&video_lock);
 	icd->use_count--;
-	if (!icd->use_count)
+	if (!icd->use_count) {
 		ici->ops->remove(icd);
+		soc_camera_free_user_formats(icd);
+	}
 	module_put(icd->ops->owner);
 	module_put(ici->ops->owner);
 	mutex_unlock(&video_lock);
@@ -266,7 +321,7 @@ static int soc_camera_close(struct inode *inode, struct file *file)
 }
 
 static ssize_t soc_camera_read(struct file *file, char __user *buf,
-			   size_t count, loff_t *ppos)
+			       size_t count, loff_t *ppos)
 {
 	struct soc_camera_file *icf = file->private_data;
 	struct soc_camera_device *icd = icf->icd;
@@ -311,7 +366,6 @@ static unsigned int soc_camera_poll(struct file *file, poll_table *pt)
 	return ici->ops->poll(file, pt);
 }
 
-
 static struct file_operations soc_camera_fops = {
 	.owner		= THIS_MODULE,
 	.open		= soc_camera_open,
@@ -323,28 +377,20 @@ static struct file_operations soc_camera_fops = {
 	.llseek		= no_llseek,
 };
 
-
 static int soc_camera_s_fmt_vid_cap(struct file *file, void *priv,
-				struct v4l2_format *f)
+				    struct v4l2_format *f)
 {
 	struct soc_camera_file *icf = file->private_data;
 	struct soc_camera_device *icd = icf->icd;
 	struct soc_camera_host *ici =
 		to_soc_camera_host(icd->dev.parent);
+	__u32 pixfmt = f->fmt.pix.pixelformat;
 	int ret;
 	struct v4l2_rect rect;
-	const static struct soc_camera_data_format *data_fmt;
 
 	WARN_ON(priv != file->private_data);
 
-	data_fmt = format_by_fourcc(icd, f->fmt.pix.pixelformat);
-	if (!data_fmt)
-		return -EINVAL;
-
-	/* buswidth may be further adjusted by the ici */
-	icd->buswidth = data_fmt->depth;
-
-	ret = soc_camera_try_fmt_vid_cap(file, icf, f);
+	ret = soc_camera_try_fmt_vid_cap(file, priv, f);
 	if (ret < 0)
 		return ret;
 
@@ -352,15 +398,20 @@ static int soc_camera_s_fmt_vid_cap(struct file *file, void *priv,
 	rect.top	= icd->y_current;
 	rect.width	= f->fmt.pix.width;
 	rect.height	= f->fmt.pix.height;
-	ret = ici->ops->set_fmt_cap(icd, f->fmt.pix.pixelformat, &rect);
-	if (ret < 0)
+	ret = ici->ops->set_fmt(icd, f->fmt.pix.pixelformat, &rect);
+	if (ret < 0) {
 		return ret;
+	} else if (!icd->current_fmt ||
+		   icd->current_fmt->fourcc != pixfmt) {
+		dev_err(&ici->dev,
+			"Host driver hasn't set up current format correctly!\n");
+		return -EINVAL;
+	}
 
-	icd->current_fmt	= data_fmt;
 	icd->width		= rect.width;
 	icd->height		= rect.height;
 	icf->vb_vidq.field	= f->fmt.pix.field;
-	if (V4L2_BUF_TYPE_VIDEO_CAPTURE != f->type)
+	if (f->type != V4L2_BUF_TYPE_VIDEO_CAPTURE)
 		dev_warn(&icd->dev, "Attention! Wrong buf-type %d\n",
 			 f->type);
 
@@ -368,11 +419,11 @@ static int soc_camera_s_fmt_vid_cap(struct file *file, void *priv,
 		icd->width, icd->height);
 
 	/* set physical bus parameters */
-	return ici->ops->set_bus_param(icd, f->fmt.pix.pixelformat);
+	return ici->ops->set_bus_param(icd, pixfmt);
 }
 
 static int soc_camera_enum_fmt_vid_cap(struct file *file, void  *priv,
-				   struct v4l2_fmtdesc *f)
+				       struct v4l2_fmtdesc *f)
 {
 	struct soc_camera_file *icf = file->private_data;
 	struct soc_camera_device *icd = icf->icd;
@@ -380,10 +431,10 @@ static int soc_camera_enum_fmt_vid_cap(struct file *file, void  *priv,
 
 	WARN_ON(priv != file->private_data);
 
-	if (f->index >= icd->num_formats)
+	if (f->index >= icd->num_user_formats)
 		return -EINVAL;
 
-	format = &icd->formats[f->index];
+	format = icd->user_formats[f->index].host_fmt;
 
 	strlcpy(f->description, format->name, sizeof(f->description));
 	f->pixelformat = format->fourcc;
@@ -391,7 +442,7 @@ static int soc_camera_enum_fmt_vid_cap(struct file *file, void  *priv,
 }
 
 static int soc_camera_g_fmt_vid_cap(struct file *file, void *priv,
-				struct v4l2_format *f)
+				    struct v4l2_format *f)
 {
 	struct soc_camera_file *icf = file->private_data;
 	struct soc_camera_device *icd = icf->icd;
@@ -402,10 +453,9 @@ static int soc_camera_g_fmt_vid_cap(struct file *file, void *priv,
 	f->fmt.pix.height	= icd->height;
 	f->fmt.pix.field	= icf->vb_vidq.field;
 	f->fmt.pix.pixelformat	= icd->current_fmt->fourcc;
-	f->fmt.pix.bytesperline	=
-		(f->fmt.pix.width * icd->current_fmt->depth) >> 3;
-	f->fmt.pix.sizeimage	=
-		f->fmt.pix.height * f->fmt.pix.bytesperline;
+	f->fmt.pix.bytesperline	= f->fmt.pix.width *
+		DIV_ROUND_UP(icd->current_fmt->depth, 8);
+	f->fmt.pix.sizeimage	= f->fmt.pix.height * f->fmt.pix.bytesperline;
 	dev_dbg(&icd->dev, "current_fmt->fourcc: 0x%08x\n",
 		icd->current_fmt->fourcc);
 	return 0;
@@ -575,7 +625,7 @@ static int soc_camera_s_crop(struct file *file, void *fh,
 	if (a->type != V4L2_BUF_TYPE_VIDEO_CAPTURE)
 		return -EINVAL;
 
-	ret = ici->ops->set_fmt_cap(icd, 0, &a->c);
+	ret = ici->ops->set_fmt(icd, 0, &a->c);
 	if (!ret) {
 		icd->width	= a->c.width;
 		icd->height	= a->c.height;
@@ -941,8 +991,6 @@ int soc_camera_video_start(struct soc_camera_device *icd)
 	vdev->minor		= -1;
 	vdev->tvnorms		= V4L2_STD_UNKNOWN,
 
-	icd->current_fmt = &icd->formats[0];
-
 	err = video_register_device(vdev, VFL_TYPE_GRABBER, vdev->minor);
 	if (err < 0) {
 		dev_err(vdev->parent, "video_register_device failed\n");
diff --git a/linux/drivers/media/video/soc_camera_platform.c b/linux/drivers/media/video/soc_camera_platform.c
index bb7a9d480..c23871e4c 100644
--- a/linux/drivers/media/video/soc_camera_platform.c
+++ b/linux/drivers/media/video/soc_camera_platform.c
@@ -79,14 +79,14 @@ soc_camera_platform_query_bus_param(struct soc_camera_device *icd)
 	return p->bus_param;
 }
 
-static int soc_camera_platform_set_fmt_cap(struct soc_camera_device *icd,
-					   __u32 pixfmt, struct v4l2_rect *rect)
+static int soc_camera_platform_set_fmt(struct soc_camera_device *icd,
+				       __u32 pixfmt, struct v4l2_rect *rect)
 {
 	return 0;
 }
 
-static int soc_camera_platform_try_fmt_cap(struct soc_camera_device *icd,
-					   struct v4l2_format *f)
+static int soc_camera_platform_try_fmt(struct soc_camera_device *icd,
+				       struct v4l2_format *f)
 {
 	struct soc_camera_platform_info *p = soc_camera_platform_get_info(icd);
 
@@ -124,8 +124,8 @@ static struct soc_camera_ops soc_camera_platform_ops = {
 	.release		= soc_camera_platform_release,
 	.start_capture		= soc_camera_platform_start_capture,
 	.stop_capture		= soc_camera_platform_stop_capture,
-	.set_fmt_cap		= soc_camera_platform_set_fmt_cap,
-	.try_fmt_cap		= soc_camera_platform_try_fmt_cap,
+	.set_fmt		= soc_camera_platform_set_fmt,
+	.try_fmt		= soc_camera_platform_try_fmt,
 	.set_bus_param		= soc_camera_platform_set_bus_param,
 	.query_bus_param	= soc_camera_platform_query_bus_param,
 };
diff --git a/linux/drivers/media/video/usbvision/usbvision-i2c.c b/linux/drivers/media/video/usbvision/usbvision-i2c.c
index 888051b80..58f65e03a 100644
--- a/linux/drivers/media/video/usbvision/usbvision-i2c.c
+++ b/linux/drivers/media/video/usbvision/usbvision-i2c.c
@@ -198,6 +198,9 @@ static struct i2c_algorithm usbvision_algo = {
 	.master_xfer   = usbvision_i2c_xfer,
 	.smbus_xfer    = NULL,
 	.functionality = functionality,
+#ifdef NEED_ALGO_CONTROL
+	.algo_control = dummy_algo_control,
+#endif
 };
 
 
diff --git a/linux/drivers/media/video/w9968cf.c b/linux/drivers/media/video/w9968cf.c
index ab3c054c4..5763a4234 100644
--- a/linux/drivers/media/video/w9968cf.c
+++ b/linux/drivers/media/video/w9968cf.c
@@ -1557,6 +1557,9 @@ static int w9968cf_i2c_init(struct w9968cf_device* cam)
 	static struct i2c_algorithm algo = {
 		.smbus_xfer =    w9968cf_i2c_smbus_xfer,
 		.functionality = w9968cf_i2c_func,
+#ifdef NEED_ALGO_CONTROL
+		.algo_control = dummy_algo_control,
+#endif
 	};
 
 	static struct i2c_adapter adap = {