merge: http://linuxtv.org/hg/~pb/v4l-dvb

From: Mauro Carvalho Chehab <mchehab@infradead.org>

Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>

13 files changed, 394 insertions, 148 deletions

diff --git a/linux/drivers/media/dvb/frontends/dibx000_common.c b/linux/drivers/media/dvb/frontends/dibx000_common.c
index bdc6d7a7d..1f6dc06a3 100644
--- a/linux/drivers/media/dvb/frontends/dibx000_common.c
+++ b/linux/drivers/media/dvb/frontends/dibx000_common.c
@@ -85,7 +85,7 @@ static int dibx000_i2c_gated_tuner_xfer(struct i2c_adapter *i2c_adap, struct i2c
 	struct i2c_msg m[2 + num];
 	u8 tx_open[4], tx_close[4];
 
-	memset(m,0, sizeof(struct i2c_msg) * (2 + num)),
+	memset(m,0, sizeof(struct i2c_msg) * (2 + num));
 
 	dibx000_i2c_select_interface(mst, DIBX000_I2C_INTERFACE_TUNER);
 
diff --git a/linux/drivers/media/video/Kconfig b/linux/drivers/media/video/Kconfig
index ebf0a7a95..4cdc058ae 100644
--- a/linux/drivers/media/video/Kconfig
+++ b/linux/drivers/media/video/Kconfig
@@ -16,6 +16,308 @@ config VIDEO_ADV_DEBUG
 	  V4L devices.
 	  In doubt, say N.
 
+config VIDEO_HELPER_CHIPS_AUTO
+	bool "Autoselect pertinent encoders/decoders and other helper chips"
+	default y
+	---help---
+	  Most video cards may require additional modules to encode or
+	  decode audio/video standards. This option will autoselect
+	  all pertinent modules to each selected video module.
+
+	  Unselect this only if you know exaclty what you are doing, since
+	  it may break support on some boards.
+
+	  In doubt, say Y.
+
+#
+# Encoder / Decoder module configuration
+#
+
+menu "Encoders/decoders and other helper chips"
+	depends on VIDEO_DEV && !VIDEO_HELPER_CHIPS_AUTO
+
+comment "Audio Decoders"
+
+config VIDEO_TVAUDIO
+	tristate "Simple audio decoder chips"
+	depends on VIDEO_V4L1 && I2C
+	---help---
+	  Support for several audio decoder chips found on some bt8xx boards:
+	  Philips: tda9840, tda9873h, tda9874h/a, tda9850, tda985x, tea6300,
+		   tea6320, tea6420, tda8425, ta8874z.
+	  Microchip: pic16c54 based design on ProVideo PV951 board.
+
+	  To compile this driver as a module, choose M here: the
+	  module will be called tvaudio.
+
+config VIDEO_TDA7432
+	tristate "Philips TDA7432 audio processor chip"
+	depends on VIDEO_V4L1 && I2C
+	---help---
+	  Support for tda7432 audio decoder chip found on some bt8xx boards.
+
+	  To compile this driver as a module, choose M here: the
+	  module will be called tda7432.
+
+config VIDEO_TDA9840
+	tristate "Philips TDA9840 audio processor chip"
+	depends on VIDEO_DEV && I2C
+	---help---
+	  Support for tda9840 audio decoder chip found on some Zoran boards.
+
+	  To compile this driver as a module, choose M here: the
+	  module will be called tda9840.
+
+config VIDEO_TDA9875
+	tristate "Philips TDA9875 audio processor chip"
+	depends on VIDEO_V4L1 && I2C
+	---help---
+	  Support for tda9875 audio decoder chip found on some bt8xx boards.
+
+	  To compile this driver as a module, choose M here: the
+	  module will be called tda9875.
+
+config VIDEO_TEA6415C
+	tristate "Philips TEA6415C audio processor chip"
+	depends on VIDEO_DEV && I2C
+	---help---
+	  Support for tea6415c audio decoder chip found on some bt8xx boards.
+
+	  To compile this driver as a module, choose M here: the
+	  module will be called tea6415c.
+
+config VIDEO_TEA6420
+	tristate "Philips TEA6420 audio processor chip"
+	depends on VIDEO_DEV && I2C
+	---help---
+	  Support for tea6420 audio decoder chip found on some bt8xx boards.
+
+	  To compile this driver as a module, choose M here: the
+	  module will be called tea6420.
+
+config VIDEO_MSP3400
+	tristate "Micronas MSP34xx audio decoders"
+	depends on VIDEO_V4L2 && I2C
+	---help---
+	  Support for the Micronas MSP34xx series of audio decoders.
+
+	  To compile this driver as a module, choose M here: the
+	  module will be called msp3400.
+
+config VIDEO_CS53L32A
+	tristate "Cirrus Logic CS53L32A audio ADC"
+	depends on VIDEO_V4L2 && I2C && EXPERIMENTAL
+	---help---
+	  Support for the Cirrus Logic CS53L32A low voltage
+	  stereo A/D converter.
+
+	  To compile this driver as a module, choose M here: the
+	  module will be called cs53l32a.
+
+config VIDEO_TLV320AIC23B
+	tristate "Texas Instruments TLV320AIC23B audio codec"
+	depends on VIDEO_V4L2 && I2C && EXPERIMENTAL
+	---help---
+	  Support for the Texas Instruments TLV320AIC23B audio codec.
+
+	  To compile this driver as a module, choose M here: the
+	  module will be called tlv320aic23b.
+
+config VIDEO_WM8775
+	tristate "Wolfson Microelectronics WM8775 audio ADC with input mixer"
+	depends on VIDEO_V4L2 && I2C && EXPERIMENTAL
+	---help---
+	  Support for the Wolfson Microelectronics WM8775 high
+	  performance stereo A/D Converter with a 4 channel input mixer.
+
+	  To compile this driver as a module, choose M here: the
+	  module will be called wm8775.
+
+config VIDEO_WM8739
+	tristate "Wolfson Microelectronics WM8739 stereo audio ADC"
+	depends on VIDEO_V4L2 && I2C && EXPERIMENTAL
+	---help---
+	  Support for the Wolfson Microelectronics WM8739
+	  stereo A/D Converter.
+
+	  To compile this driver as a module, choose M here: the
+	  module will be called wm8739.
+
+comment "MPEG video encoders"
+
+config VIDEO_CX2341X
+	tristate "Conexant CX2341x MPEG encoders"
+	depends on VIDEO_V4L2 && EXPERIMENTAL
+	---help---
+	  Support for the Conexant CX23416 MPEG encoders
+	  and CX23415 MPEG encoder/decoders.
+
+	  This module currently supports the encoding functions only.
+
+	  To compile this driver as a module, choose M here: the
+	  module will be called cx2341x.
+
+source "drivers/media/video/cx25840/Kconfig"
+
+comment "Video encoders"
+
+config VIDEO_SAA7127
+	tristate "Philips SAA7127/9 digital video encoders"
+	depends on VIDEO_V4L2 && I2C && EXPERIMENTAL
+	---help---
+	  Support for the Philips SAA7127/9 digital video encoders.
+
+	  To compile this driver as a module, choose M here: the
+	  module will be called saa7127.
+
+config VIDEO_SAA7185
+	tristate "Philips SAA7185 video encoder"
+	depends on VIDEO_V4L1 && I2C
+	---help---
+	  Support for the Philips SAA7185 video encoder.
+
+	  To compile this driver as a module, choose M here: the
+	  module will be called saa7185.
+
+config VIDEO_ADV7170
+	tristate "Analog Devices ADV7170 video encoder driver"
+	depends on VIDEO_V4L1 && I2C
+	---help---
+	  Support for the Analog Devices ADV7170 video encoder driver
+
+	  To compile this driver as a module, choose M here: the
+	  module will be called adv7170.
+
+config VIDEO_ADV7175
+	tristate "Analog Devices ADV7175 video encoder driver"
+	depends on VIDEO_V4L1 && I2C
+	---help---
+	  Support for the Analog Devices ADV7175 video encoder driver
+
+	  To compile this driver as a module, choose M here: the
+	  module will be called adv7175.
+
+comment "Video decoders"
+
+config VIDEO_BT819
+	tristate "BT819A VideoStream Decoder"
+	depends on VIDEO_V4L1 && I2C
+	---help---
+	  Support for BT819A video decoder.
+
+	  To compile this driver as a module, choose M here: the
+	  module will be called bt819.
+
+config VIDEO_BT856
+	tristate "BT856 VideoStream Decoder"
+	depends on VIDEO_V4L1 && I2C
+	---help---
+	  Support for BT856 video decoder.
+
+	  To compile this driver as a module, choose M here: the
+	  module will be called bt856.
+
+config VIDEO_BT866
+	tristate "BT866 VideoStream Decoder"
+	depends on VIDEO_V4L1 && I2C
+	---help---
+	  Support for BT866 video decoder.
+
+	  To compile this driver as a module, choose M here: the
+	  module will be called bt866.
+
+config VIDEO_SAA7110
+	tristate "Philips SAA7110 video decoder"
+	depends on VIDEO_V4L1
+	---help---
+	  Support for the Philips SAA7110 video decoders.
+
+	  To compile this driver as a module, choose M here: the
+	  module will be called saa7110.
+
+config VIDEO_SAA7111
+	tristate "Philips SAA7111 video decoder"
+	depends on VIDEO_V4L1 && I2C
+	---help---
+	  Support for the Philips SAA711 video decoder.
+
+	  To compile this driver as a module, choose M here: the
+	  module will be called saa7111.
+
+config VIDEO_SAA7114
+	tristate "Philips SAA7114 video decoder"
+	depends on VIDEO_V4L1 && I2C
+	---help---
+	  Support for the Philips SAA7114 video decoder. This driver
+	  is used only on Zoran driver and should be moved soon to
+	  SAA711x module.
+
+	  To compile this driver as a module, choose M here: the
+	  module will be called saa7114.
+
+config VIDEO_SAA711X
+	tristate "Philips SAA7113/4/5 video decoders"
+	depends on VIDEO_V4L2 && I2C && EXPERIMENTAL
+	---help---
+	  Support for the Philips SAA7113/4/5 video decoders.
+
+	  To compile this driver as a module, choose M here: the
+	  module will be called saa7115.
+
+config VIDEO_SAA7191
+	tristate "Philips SAA7191 video decoder"
+	depends on VIDEO_V4L1 && I2C
+	---help---
+	  Support for the Philips SAA7191 video decoder.
+
+	  To compile this driver as a module, choose M here: the
+	  module will be called saa7191.
+
+config VIDEO_TVP5150
+	tristate "Texas Instruments TVP5150 video decoder"
+	depends on VIDEO_V4L2 && I2C
+	---help---
+	  Support for the Texas Instruments TVP5150 video decoder.
+
+	  To compile this driver as a module, choose M here: the
+	  module will be called tvp5150.
+
+config VIDEO_VPX3220
+	tristate "vpx3220a, vpx3216b & vpx3214c video decoder driver"
+	depends on VIDEO_V4L1 && I2C
+	---help---
+	  Support for VPX322x video decoders.
+
+	  To compile this driver as a module, choose M here: the
+	  module will be called vpx3220.
+
+comment "Video improvement chips"
+
+config VIDEO_UPD64031A
+	tristate "NEC Electronics uPD64031A Ghost Reduction"
+	depends on VIDEO_V4L2 && I2C && EXPERIMENTAL
+	---help---
+	  Support for the NEC Electronics uPD64031A Ghost Reduction
+	  video chip. It is most often found in NTSC TV cards made for
+	  Japan and is used to reduce the 'ghosting' effect that can
+	  be present in analog TV broadcasts.
+
+	  To compile this driver as a module, choose M here: the
+	  module will be called upd64031a.
+
+config VIDEO_UPD64083
+	tristate "NEC Electronics uPD64083 3-Dimensional Y/C separation"
+	depends on VIDEO_V4L2 && I2C && EXPERIMENTAL
+	---help---
+	  Support for the NEC Electronics uPD64083 3-Dimensional Y/C
+	  separation video chip. It is used to improve the quality of
+	  the colors of a composite signal.
+
+	  To compile this driver as a module, choose M here: the
+	  module will be called upd64083.
+
+endmenu # encoder / decoder chips
+
 config VIDEO_VIVI
 	tristate "Virtual Video Driver"
 	depends on VIDEO_V4L2 && !SPARC32 && !SPARC64
@@ -164,6 +466,7 @@ config VIDEO_VINO
 	tristate "SGI Vino Video For Linux (EXPERIMENTAL)"
 	depends on I2C && SGI_IP22 && EXPERIMENTAL && VIDEO_V4L2
 	select I2C_ALGO_SGI
+	select VIDEO_SAA7191 if VIDEO_HELPER_CHIPS_AUTO
 	help
 	  Say Y here to build in support for the Vino video input system found
 	  on SGI Indy machines.
@@ -176,6 +479,9 @@ config VIDEO_STRADIS
 	  driver for PCI.  There is a product page at
 	  <http://www.stradis.com/>.
 
+config VIDEO_ZORAN_ZR36060
+	tristate
+
 config VIDEO_ZORAN
 	tristate "Zoran ZR36057/36067 Video For Linux"
 	depends on PCI && I2C_ALGOBIT && VIDEO_V4L1 && !PPC64
@@ -192,12 +498,18 @@ config VIDEO_ZORAN
 config VIDEO_ZORAN_BUZ
 	tristate "Iomega Buz support"
 	depends on VIDEO_ZORAN
+	select VIDEO_SAA7111 if VIDEO_HELPER_CHIPS_AUTO
+	select VIDEO_SAA7185 if VIDEO_HELPER_CHIPS_AUTO
+	select VIDEO_ZORAN_ZR36060
 	help
 	  Support for the Iomega Buz MJPEG capture/playback card.
 
 config VIDEO_ZORAN_DC10
 	tristate "Pinnacle/Miro DC10(+) support"
 	depends on VIDEO_ZORAN
+	select VIDEO_SAA7110
+	select VIDEO_ADV7175 if VIDEO_HELPER_CHIPS_AUTO
+	select VIDEO_ZORAN_ZR36060
 	help
 	  Support for the Pinnacle/Miro DC10(+) MJPEG capture/playback
 	  card.
@@ -205,6 +517,8 @@ config VIDEO_ZORAN_DC10
 config VIDEO_ZORAN_DC30
 	tristate "Pinnacle/Miro DC30(+) support"
 	depends on VIDEO_ZORAN
+	select VIDEO_ADV7175 if VIDEO_HELPER_CHIPS_AUTO
+	select VIDEO_VPX3220 if VIDEO_HELPER_CHIPS_AUTO
 	help
 	  Support for the Pinnacle/Miro DC30(+) MJPEG capture/playback
 	  card. This also supports really old DC10 cards based on the
@@ -213,6 +527,9 @@ config VIDEO_ZORAN_DC30
 config VIDEO_ZORAN_LML33
 	tristate "Linux Media Labs LML33 support"
 	depends on VIDEO_ZORAN
+	select VIDEO_BT819 if VIDEO_HELPER_CHIPS_AUTO
+	select VIDEO_BT856 if VIDEO_HELPER_CHIPS_AUTO
+	select VIDEO_ZORAN_ZR36060
 	help
 	  Support for the Linux Media Labs LML33 MJPEG capture/playback
 	  card.
@@ -220,6 +537,9 @@ config VIDEO_ZORAN_LML33
 config VIDEO_ZORAN_LML33R10
 	tristate "Linux Media Labs LML33R10 support"
 	depends on VIDEO_ZORAN
+	select VIDEO_SAA7114 if VIDEO_HELPER_CHIPS_AUTO
+	select VIDEO_ADV7170 if VIDEO_HELPER_CHIPS_AUTO
+	select VIDEO_ZORAN_ZR36060
 	help
 	  support for the Linux Media Labs LML33R10 MJPEG capture/playback
 	  card.
@@ -227,6 +547,9 @@ config VIDEO_ZORAN_LML33R10
 config VIDEO_ZORAN_AVS6EYES
 	tristate "AverMedia 6 Eyes support (EXPERIMENTAL)"
 	depends on VIDEO_ZORAN && EXPERIMENTAL && VIDEO_V4L1
+	select VIDEO_BT856 if VIDEO_HELPER_CHIPS_AUTO
+	select VIDEO_KS0127 if VIDEO_HELPER_CHIPS_AUTO
+	select VIDEO_ZORAN_ZR36060
 	help
 	  Support for the AverMedia 6 Eyes video surveillance card.
 
@@ -263,6 +586,10 @@ config VIDEO_MXB
 	depends on PCI && VIDEO_V4L1
 	select VIDEO_SAA7146_VV
 	select VIDEO_TUNER
+	select VIDEO_SAA7111 if VIDEO_HELPER_CHIPS_AUTO
+	select VIDEO_TDA9840 if VIDEO_HELPER_CHIPS_AUTO
+	select VIDEO_TEA6415C if VIDEO_HELPER_CHIPS_AUTO
+	select VIDEO_TEA6420 if VIDEO_HELPER_CHIPS_AUTO
 	---help---
 	  This is a video4linux driver for the 'Multimedia eXtension Board'
 	  TV card by Siemens-Nixdorf.
@@ -274,6 +601,7 @@ config VIDEO_DPC
 	tristate "Philips-Semiconductors 'dpc7146 demonstration board'"
 	depends on PCI && VIDEO_V4L1
 	select VIDEO_SAA7146_VV
+	select VIDEO_SAA7111 if VIDEO_HELPER_CHIPS_AUTO
 	---help---
 	  This is a video4linux driver for the 'dpc7146 demonstration
 	  board' by Philips-Semiconductors. It's the reference design
@@ -329,127 +657,6 @@ config VIDEO_M32R_AR_M64278
 	  module will be called arv.
 
 #
-# Encoder / Decoder module configuration
-#
-
-menu "Encoders and Decoders"
-	depends on VIDEO_DEV
-
-config VIDEO_MSP3400
-	tristate "Micronas MSP34xx audio decoders"
-	depends on VIDEO_DEV && I2C
-	---help---
-	  Support for the Micronas MSP34xx series of audio decoders.
-
-	  To compile this driver as a module, choose M here: the
-	  module will be called msp3400.
-
-config VIDEO_CS53L32A
-	tristate "Cirrus Logic CS53L32A audio ADC"
-	depends on VIDEO_DEV && I2C && EXPERIMENTAL
-	---help---
-	  Support for the Cirrus Logic CS53L32A low voltage
-	  stereo A/D converter.
-
-	  To compile this driver as a module, choose M here: the
-	  module will be called cs53l32a.
-
-config VIDEO_TLV320AIC23B
-	tristate "Texas Instruments TLV320AIC23B audio codec"
-	depends on VIDEO_DEV && I2C && EXPERIMENTAL
-	---help---
-	  Support for the Texas Instruments TLV320AIC23B audio codec.
-
-	  To compile this driver as a module, choose M here: the
-	  module will be called tlv320aic23b.
-
-config VIDEO_WM8775
-	tristate "Wolfson Microelectronics WM8775 audio ADC with input mixer"
-	depends on VIDEO_DEV && I2C && EXPERIMENTAL
-	---help---
-	  Support for the Wolfson Microelectronics WM8775 high
-	  performance stereo A/D Converter with a 4 channel input mixer.
-
-	  To compile this driver as a module, choose M here: the
-	  module will be called wm8775.
-
-config VIDEO_WM8739
-	tristate "Wolfson Microelectronics WM8739 stereo audio ADC"
-	depends on VIDEO_DEV && I2C && EXPERIMENTAL
-	---help---
-	  Support for the Wolfson Microelectronics WM8739
-	  stereo A/D Converter.
-
-	  To compile this driver as a module, choose M here: the
-	  module will be called wm8739.
-
-config VIDEO_CX2341X
-	tristate "Conexant CX2341x MPEG encoders"
-	depends on VIDEO_V4L2 && EXPERIMENTAL
-	---help---
-	  Support for the Conexant CX23416 MPEG encoders
-	  and CX23415 MPEG encoder/decoders.
-
-	  This module currently supports the encoding functions only.
-
-	  To compile this driver as a module, choose M here: the
-	  module will be called cx2341x.
-
-source "drivers/media/video/cx25840/Kconfig"
-
-config VIDEO_SAA711X
-	tristate "Philips SAA7113/4/5 video decoders"
-	depends on VIDEO_DEV && I2C && EXPERIMENTAL
-	---help---
-	  Support for the Philips SAA7113/4/5 video decoders.
-
-	  To compile this driver as a module, choose M here: the
-	  module will be called saa7115.
-
-config VIDEO_TVP5150
-	tristate "Texas Instruments TVP5150 video decoder"
-	depends on VIDEO_DEV && I2C
-	---help---
-	  Support for the Texas Instruments TVP5150 video decoder.
-
-	  To compile this driver as a module, choose M here: the
-	  module will be called tvp5150.
-
-config VIDEO_SAA7127
-	tristate "Philips SAA7127/9 digital video encoders"
-	depends on VIDEO_V4L2 && I2C && EXPERIMENTAL
-	---help---
-	  Support for the Philips SAA7127/9 digital video encoders.
-
-	  To compile this driver as a module, choose M here: the
-	  module will be called saa7127.
-
-config VIDEO_UPD64031A
-	tristate "NEC Electronics uPD64031A Ghost Reduction"
-	depends on VIDEO_V4L2 && I2C && EXPERIMENTAL
-	---help---
-	  Support for the NEC Electronics uPD64031A Ghost Reduction
-	  video chip. It is most often found in NTSC TV cards made for
-	  Japan and is used to reduce the 'ghosting' effect that can
-	  be present in analog TV broadcasts.
-
-	  To compile this driver as a module, choose M here: the
-	  module will be called upd64031a.
-
-config VIDEO_UPD64083
-	tristate "NEC Electronics uPD64083 3-Dimensional Y/C separation"
-	depends on VIDEO_V4L2 && I2C && EXPERIMENTAL
-	---help---
-	  Support for the NEC Electronics uPD64083 3-Dimensional Y/C
-	  separation video chip. It is used to improve the quality of
-	  the colors of a composite signal.
-
-	  To compile this driver as a module, choose M here: the
-	  module will be called upd64083.
-
-endmenu # encoder / decoder chips
-
-#
 # USB Multimedia device configuration
 #
 
diff --git a/linux/drivers/media/video/Makefile b/linux/drivers/media/video/Makefile
index 231f62b57..eecbede6c 100644
--- a/linux/drivers/media/video/Makefile
+++ b/linux/drivers/media/video/Makefile
@@ -17,7 +17,10 @@ ifeq ($(CONFIG_VIDEO_V4L1_COMPAT),y)
 endif
 
 obj-$(CONFIG_VIDEO_BT848) += bt8xx/
-obj-$(CONFIG_VIDEO_BT848) += tvaudio.o tda7432.o tda9875.o ir-kbd-i2c.o
+obj-$(CONFIG_VIDEO_BT848) += ir-kbd-i2c.o
+obj-$(CONFIG_VIDEO_TVAUDIO) += tvaudio.o
+obj-$(CONFIG_VIDEO_TDA7432) += tda7432.o
+obj-$(CONFIG_VIDEO_TDA9875) += tda9875.o
 obj-$(CONFIG_SOUND_TVMIXER) += tvmixer.o
 
 obj-$(CONFIG_VIDEO_ZR36120) += zoran.o
@@ -27,17 +30,31 @@ obj-$(CONFIG_VIDEO_SAA5249) += saa5249.o
 obj-$(CONFIG_VIDEO_CQCAM) += c-qcam.o
 obj-$(CONFIG_VIDEO_BWQCAM) += bw-qcam.o
 obj-$(CONFIG_VIDEO_W9966) += w9966.o
-obj-$(CONFIG_VIDEO_ZORAN_BUZ) += saa7111.o saa7185.o zr36060.o
-obj-$(CONFIG_VIDEO_ZORAN_DC10) += saa7110.o adv7175.o zr36060.o
-obj-$(CONFIG_VIDEO_ZORAN_DC30) += adv7175.o vpx3220.o zr36050.o \
-	zr36016.o
-obj-$(CONFIG_VIDEO_ZORAN_LML33) += bt819.o bt856.o zr36060.o
-obj-$(CONFIG_VIDEO_ZORAN_LML33R10) += saa7114.o adv7170.o zr36060.o
-obj-$(CONFIG_VIDEO_ZORAN_AVS6EYES) += bt866.o ks0127.o zr36060.o
+
+obj-$(CONFIG_VIDEO_TDA9840) += tda9840.o
+obj-$(CONFIG_VIDEO_TEA6415C) += tea6415c.o
+obj-$(CONFIG_VIDEO_TEA6420) += tea6420.o
+obj-$(CONFIG_VIDEO_SAA7110) += saa7110.o
+obj-$(CONFIG_VIDEO_SAA7111) += saa7111.o
+obj-$(CONFIG_VIDEO_SAA7114) += saa7114.o
+obj-$(CONFIG_VIDEO_SAA711X) += saa7115.o
+obj-$(CONFIG_VIDEO_SAA7127) += saa7127.o
+obj-$(CONFIG_VIDEO_SAA7185) += saa7185.o
+obj-$(CONFIG_VIDEO_SAA7191) += saa7191.o
+obj-$(CONFIG_VIDEO_ADV7170) += adv7170.o
+obj-$(CONFIG_VIDEO_ADV7175) += adv7175.o
+obj-$(CONFIG_VIDEO_VPX3220) += vpx3220.o
+obj-$(CONFIG_VIDEO_BT819) += bt819.o
+obj-$(CONFIG_VIDEO_BT856) += bt856.o
+obj-$(CONFIG_VIDEO_BT866) += bt866.o
+
 obj-$(CONFIG_VIDEO_ZORAN) += zr36067.o videocodec.o
+obj-$(CONFIG_VIDEO_ZORAN_DC30) += zr36050.o zr36016.o
+obj-$(CONFIG_VIDEO_ZORAN_ZR36060) += zr36060.o
+
 obj-$(CONFIG_VIDEO_PMS) += pms.o
 obj-$(CONFIG_VIDEO_PLANB) += planb.o
-obj-$(CONFIG_VIDEO_VINO) += vino.o saa7191.o indycam.o
+obj-$(CONFIG_VIDEO_VINO) += vino.o indycam.o
 obj-$(CONFIG_VIDEO_STRADIS) += stradis.o
 obj-$(CONFIG_VIDEO_CPIA) += cpia.o
 obj-$(CONFIG_VIDEO_CPIA_PP) += cpia_pp.o
@@ -55,10 +72,10 @@ obj-$(CONFIG_VIDEO_WM8775) += wm8775.o
 obj-$(CONFIG_VIDEO_WM8739) += wm8739.o
 obj-$(CONFIG_VIDEO_OVCAMCHIP) += ovcamchip/
 obj-$(CONFIG_VIDEO_CPIA2) += cpia2/
-obj-$(CONFIG_VIDEO_MXB) += saa7111.o tda9840.o tea6415c.o tea6420.o mxb.o
+obj-$(CONFIG_VIDEO_MXB) += mxb.o
 obj-$(CONFIG_VIDEO_HEXIUM_ORION) += hexium_orion.o
 obj-$(CONFIG_VIDEO_HEXIUM_GEMINI) += hexium_gemini.o
-obj-$(CONFIG_VIDEO_DPC) += saa7111.o dpc7146.o
+obj-$(CONFIG_VIDEO_DPC) += dpc7146.o
 obj-$(CONFIG_TUNER_3036) += tuner-3036.o
 
 obj-$(CONFIG_VIDEO_TUNER) += tuner.o
@@ -70,8 +87,6 @@ obj-$(CONFIG_VIDEO_TVEEPROM) += tveeprom.o
 obj-$(CONFIG_VIDEO_M32R_AR_M64278) += arv.o
 
 obj-$(CONFIG_VIDEO_CX25840) += cx25840/
-obj-$(CONFIG_VIDEO_SAA711X) += saa7115.o
-obj-$(CONFIG_VIDEO_SAA7127) += saa7127.o
 obj-$(CONFIG_VIDEO_UPD64031A) += upd64031a.o
 obj-$(CONFIG_VIDEO_UPD64083) += upd64083.o
 obj-$(CONFIG_VIDEO_CX2341X) += cx2341x.o
@@ -96,4 +111,3 @@ obj-$(CONFIG_VIDEO_VIVI) += vivi.o
 
 EXTRA_CFLAGS += -Idrivers/media/dvb/dvb-core
 extra-cflags-$(CONFIG_VIDEO_V4L1_COMPAT) += -DCONFIG_VIDEO_V4L1_COMPAT
-
diff --git a/linux/drivers/media/video/bt8xx/Kconfig b/linux/drivers/media/video/bt8xx/Kconfig
index cdcf55650..58eae887a 100644
--- a/linux/drivers/media/video/bt8xx/Kconfig
+++ b/linux/drivers/media/video/bt8xx/Kconfig
@@ -8,7 +8,10 @@ config VIDEO_BT848
 	select VIDEO_IR
 	select VIDEO_TUNER
 	select VIDEO_TVEEPROM
-	select VIDEO_MSP3400
+	select VIDEO_MSP3400 if VIDEO_HELPER_CHIPS_AUTO
+	select VIDEO_TVAUDIO if VIDEO_HELPER_CHIPS_AUTO
+	select VIDEO_TDA7432 if VIDEO_HELPER_CHIPS_AUTO
+	select VIDEO_TDA9875 if VIDEO_HELPER_CHIPS_AUTO
 	---help---
 	  Support for BT848 based frame grabber/overlay boards. This includes
 	  the Miro, Hauppauge and STB boards. Please read the material in
diff --git a/linux/drivers/media/video/bt8xx/bttv-input.c b/linux/drivers/media/video/bt8xx/bttv-input.c
index ce5ce470a..43bc6805b 100644
--- a/linux/drivers/media/video/bt8xx/bttv-input.c
+++ b/linux/drivers/media/video/bt8xx/bttv-input.c
@@ -304,6 +304,7 @@ int bttv_input_init(struct bttv *btv)
 		ir->mask_keyup   = 0x010000;
 		ir->polling      = 50; // ms
 		break;
+	case BTTV_BOARD_PV_M4900:
 	case BTTV_BOARD_PV_BT878P_9B:
 	case BTTV_BOARD_PV_BT878P_PLUS:
 		ir_codes         = ir_codes_pixelview;
diff --git a/linux/drivers/media/video/cx25840/Kconfig b/linux/drivers/media/video/cx25840/Kconfig
index 854264e42..7cf29a03e 100644
--- a/linux/drivers/media/video/cx25840/Kconfig
+++ b/linux/drivers/media/video/cx25840/Kconfig
@@ -1,6 +1,6 @@
 config VIDEO_CX25840
 	tristate "Conexant CX2584x audio/video decoders"
-	depends on VIDEO_DEV && I2C && EXPERIMENTAL
+	depends on VIDEO_V4L2 && I2C && EXPERIMENTAL
 	select FW_LOADER
 	---help---
 	  Support for the Conexant CX2584x audio/video decoders.
diff --git a/linux/drivers/media/video/cx88/cx88-i2c.c b/linux/drivers/media/video/cx88/cx88-i2c.c
index af6bf0e34..5a1114666 100644
--- a/linux/drivers/media/video/cx88/cx88-i2c.c
+++ b/linux/drivers/media/video/cx88/cx88-i2c.c
@@ -6,6 +6,7 @@
 			   & Marcus Metzler (mocm@thp.uni-koeln.de)
     (c) 2002 Yurij Sysoev <yurij@naturesoft.net>
     (c) 1999-2003 Gerd Knorr <kraxel@bytesex.org>
+    (c) 2005 Mauro Carvalho Chehab <mchehab@infradead.org>
 
     This program is free software; you can redistribute it and/or modify
     it under the terms of the GNU General Public License as published by
diff --git a/linux/drivers/media/video/em28xx/Kconfig b/linux/drivers/media/video/em28xx/Kconfig
index 538d0fd5d..9285a58e4 100644
--- a/linux/drivers/media/video/em28xx/Kconfig
+++ b/linux/drivers/media/video/em28xx/Kconfig
@@ -5,8 +5,8 @@ config VIDEO_EM28XX
 	select VIDEO_TUNER
 	select VIDEO_TVEEPROM
 	select VIDEO_IR
-	select VIDEO_SAA711X
-	select VIDEO_TVP5150
+	select VIDEO_SAA711X if VIDEO_HELPER_CHIPS_AUTO
+	select VIDEO_TVP5150 if VIDEO_HELPER_CHIPS_AUTO
 	---help---
 	  This is a video4linux driver for Empia 28xx based TV cards.
 
diff --git a/linux/drivers/media/video/ks0127.c b/linux/drivers/media/video/ks0127.c
index 3bf7ac4f5..c1a377f79 100644
--- a/linux/drivers/media/video/ks0127.c
+++ b/linux/drivers/media/video/ks0127.c
@@ -832,8 +832,7 @@ static int ks0127_detach(struct i2c_client *client)
 static int __devinit ks0127_init_module(void)
 {
 	init_reg_defaults();
-	i2c_add_driver(&i2c_driver_ks0127);
-	return 0;
+	return i2c_add_driver(&i2c_driver_ks0127);
 }
 
 static void __devexit ks0127_cleanup_module(void)
diff --git a/linux/drivers/media/video/pvrusb2/Kconfig b/linux/drivers/media/video/pvrusb2/Kconfig
index 7e727fe14..a52171ef6 100644
--- a/linux/drivers/media/video/pvrusb2/Kconfig
+++ b/linux/drivers/media/video/pvrusb2/Kconfig
@@ -5,8 +5,6 @@ config VIDEO_PVRUSB2
 	select VIDEO_TUNER
 	select VIDEO_TVEEPROM
 	select VIDEO_CX2341X
-	select VIDEO_SAA711X
-	select VIDEO_MSP3400
 	---help---
 	  This is a video4linux driver for Conexant 23416 based
 	  usb2 personal video recorder devices.
@@ -14,6 +12,20 @@ config VIDEO_PVRUSB2
 	  To compile this driver as a module, choose M here: the
 	  module will be called pvrusb2
 
+config VIDEO_PVRUSB2_29XXX
+	bool "Hauppauge WinTV-PVR USB2 support for 29xxx model series"
+	depends on VIDEO_PVRUSB2 && EXPERIMENTAL
+	select VIDEO_SAA711X
+	select VIDEO_MSP3400
+	---help---
+	  This option enables support for WinTV-PVR USB2 devices whose 
+	  model number is of the form "29xxx" (leading prefix of "29" 
+	  followed by 3 digits).
+	  To see if you may need this option, examine the white
+	  sticker on the underside of your device.
+
+	  If you are in doubt, say Y.
+
 config VIDEO_PVRUSB2_24XXX
 	bool "Hauppauge WinTV-PVR USB2 support for 24xxx model series"
 	depends on VIDEO_PVRUSB2 && EXPERIMENTAL
@@ -60,3 +72,5 @@ config VIDEO_PVRUSB2_DEBUGIFC
 	  You do not need to select this option unless you plan
 	  on debugging the driver or performing a manual firmware
 	  extraction.
+
+	  If you are in doubt, say N.
diff --git a/linux/drivers/media/video/tuner-types.c b/linux/drivers/media/video/tuner-types.c
index 627470a08..b59e72f71 100644
--- a/linux/drivers/media/video/tuner-types.c
+++ b/linux/drivers/media/video/tuner-types.c
@@ -963,11 +963,17 @@ static struct tuner_params tuner_lg_tdvs_h06xf_params[] = {
 
 /* ------------ TUNER_YMEC_TVF66T5_B_DFF - Philips PAL ------------ */
 
+static struct tuner_range tuner_ymec_tvf66t5_b_dff_pal_ranges[] = {
+	{ 16 * 160.25 /*MHz*/, 0x8e, 0x01, },
+	{ 16 * 464.25 /*MHz*/, 0x8e, 0x02, },
+	{ 16 * 999.99        , 0x8e, 0x08, },
+};
+
 static struct tuner_params tuner_ymec_tvf66t5_b_dff_params[] = {
 	{
 		.type   = TUNER_PARAM_TYPE_PAL,
-		.ranges = tuner_tena_9533_di_pal_ranges,
-		.count  = ARRAY_SIZE(tuner_tena_9533_di_pal_ranges),
+		.ranges = tuner_ymec_tvf66t5_b_dff_pal_ranges,
+		.count  = ARRAY_SIZE(tuner_ymec_tvf66t5_b_dff_pal_ranges),
 	},
 };
 
diff --git a/linux/drivers/media/video/vivi.c b/linux/drivers/media/video/vivi.c
index de72ebf74..14af7b90f 100644
--- a/linux/drivers/media/video/vivi.c
+++ b/linux/drivers/media/video/vivi.c
@@ -1068,7 +1068,8 @@ static int vidiocgmbuf (struct file *file, void *priv, struct video_mbuf *mbuf)
 	struct vivi_fh  *fh=priv;
 	struct videobuf_queue *q=&fh->vb_vidq;
 	struct v4l2_requestbuffers req;
-	unsigned int i, ret;
+	unsigned int i;
+	int ret;
 
 	req.type   = q->type;
 	req.count  = 8;
diff --git a/linux/drivers/media/video/vpx3220.c b/linux/drivers/media/video/vpx3220.c
index ad92a39a8..01f83d285 100644
--- a/linux/drivers/media/video/vpx3220.c
+++ b/linux/drivers/media/video/vpx3220.c
@@ -745,6 +745,6 @@ vpx3220_cleanup (void)
 module_init(vpx3220_init);
 module_exit(vpx3220_cleanup);
 
-MODULE_DESCRIPTION("vpx3220a/vpx3216b/vpx3214c video encoder driver");
+MODULE_DESCRIPTION("vpx3220a/vpx3216b/vpx3214c video decoder driver");
 MODULE_AUTHOR("Laurent Pinchart");
 MODULE_LICENSE("GPL");