Add support for DvbWorld 2004 DVB-S2 PCI adapter

From: Igor M. Liplianin <liplianin@me.by>

Add support for DvbWorld 2004 DVB-S2 PCI adapter.
The card contains dm1105 PCI chip and cx24116 demodulator

Signed-off-by: Igor M. Liplianin <liplianin@me.by>

3 files changed, 14 insertions, 17 deletions

diff --git a/linux/drivers/media/dvb/Kconfig b/linux/drivers/media/dvb/Kconfig
index 5858744e7..14488f644 100644
--- a/linux/drivers/media/dvb/Kconfig
+++ b/linux/drivers/media/dvb/Kconfig
@@ -36,7 +36,7 @@ comment "Supported Pluto2 Adapters"
 source "drivers/media/dvb/pluto2/Kconfig"
 
 comment "Supported SDMC DM1105 Adapters"
-        depends on DVB_CORE && PCI && I2C
+	depends on DVB_CORE && PCI && I2C
 source "drivers/media/dvb/dm1105/Kconfig"
 
 comment "Supported DVB Frontends"
diff --git a/linux/drivers/media/dvb/dm1105/Kconfig b/linux/drivers/media/dvb/dm1105/Kconfig
index fc2ca7dca..4b96bbba9 100644
--- a/linux/drivers/media/dvb/dm1105/Kconfig
+++ b/linux/drivers/media/dvb/dm1105/Kconfig
@@ -1,14 +1,15 @@
 config DVB_DM1105
-        tristate "SDMC DM1105 based PCI cards"
-        depends on DVB_CORE && PCI && I2C
+	tristate "SDMC DM1105 based PCI cards"
+	depends on DVB_CORE && PCI && I2C
 	select DVB_PLL if !DVB_FE_CUSTOMISE
 	select DVB_STV0299 if !DVB_FE_CUSTOMISE
-        help
-          Support for cards based on the SDMC DM1105 PCI chip like
-          DvbWorld 2002
+	select DVB_CX24116 if !DVB_FE_CUSTOMISE
+	help
+	  Support for cards based on the SDMC DM1105 PCI chip like
+	  DvbWorld 2002
 
-          Since these cards have no MPEG decoder onboard, they transmit
-          only compressed MPEG data over the PCI bus, so you need
-          an external software decoder to watch TV on your computer.
+	  Since these cards have no MPEG decoder onboard, they transmit
+	  only compressed MPEG data over the PCI bus, so you need
+	  an external software decoder to watch TV on your computer.
 
-          Say Y or M if you own such a device and want to use it.
+	  Say Y or M if you own such a device and want to use it.
diff --git a/linux/drivers/media/dvb/dm1105/dm1105.c b/linux/drivers/media/dvb/dm1105/dm1105.c
index 2dd31ee00..7f300d4e7 100644
--- a/linux/drivers/media/dvb/dm1105/dm1105.c
+++ b/linux/drivers/media/dvb/dm1105/dm1105.c
@@ -41,8 +41,8 @@
 #include "stv0299.h"
 /*#include "stv0288.h"
  *#include "si21xx.h"
- *#include "stb6000.h"
- *#include "cx24116.h"*/
+ *#include "stb6000.h"*/
+#include "cx24116.h"
 #include "z0194a.h"
 
 /* ----------------------------------------------- */
@@ -613,11 +613,11 @@ static struct si21xx_config serit_config = {
 	.min_delay_ms = 100,
 
 };
+#endif /* keep */
 
 static struct cx24116_config serit_sp2633_config = {
 	.demod_address = 0x55,
 };
-#endif /* keep */
 
 static int __devinit frontend_init(struct dm1105dvb *dm1105dvb)
 {
@@ -659,15 +659,11 @@ static int __devinit frontend_init(struct dm1105dvb *dm1105dvb)
 #endif /* keep */
 		break;
 	case PCI_DEVICE_ID_DW2004:
-#if 0 /* keep */
 		dm1105dvb->fe = dvb_attach(
 			cx24116_attach, &serit_sp2633_config,
 			&dm1105dvb->i2c_adap);
 		if (dm1105dvb->fe)
 			dm1105dvb->fe->ops.set_voltage = dm1105dvb_set_voltage;
-#else /* keep */
-		dev_err(&dm1105dvb->pdev->dev, "needs cx24116 module\n");
-#endif /* keep */
 		break;
 	}