merge: http://www.linuxtv.org/hg/~hverkuil/v4l-dvb

From: Mauro Carvalho Chehab <mchehab@redhat.com>

Priority: normal

Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

23 files changed, 765 insertions, 103 deletions

diff --git a/linux/drivers/media/Kconfig b/linux/drivers/media/Kconfig
index 93ea201f4..223c36ede 100644
--- a/linux/drivers/media/Kconfig
+++ b/linux/drivers/media/Kconfig
@@ -117,7 +117,7 @@ source "drivers/media/dvb/Kconfig"
 config DAB
 	boolean "DAB adapters"
 	---help---
-	  Allow selecting support for for Digital Audio Broadcasting (DAB)
+	  Allow selecting support for Digital Audio Broadcasting (DAB)
 	  Receiver adapters.
 
 if DAB
diff --git a/linux/drivers/media/common/ir-keymaps.c b/linux/drivers/media/common/ir-keymaps.c
index 03fabc86c..827e65582 100644
--- a/linux/drivers/media/common/ir-keymaps.c
+++ b/linux/drivers/media/common/ir-keymaps.c
@@ -154,6 +154,65 @@ IR_KEYTAB_TYPE ir_codes_avermedia_m135a[IR_KEYTAB_SIZE] = {
 };
 EXPORT_SYMBOL_GPL(ir_codes_avermedia_m135a);
 
+/* Oldrich Jedlicka <oldium.pro@seznam.cz> */
+IR_KEYTAB_TYPE ir_codes_avermedia_cardbus[IR_KEYTAB_SIZE] = {
+	[0x00] = KEY_POWER,
+	[0x01] = KEY_TUNER,		/* TV/FM */
+	[0x03] = KEY_TEXT,		/* Teletext */
+	[0x04] = KEY_EPG,
+	[0x05] = KEY_1,
+	[0x06] = KEY_2,
+	[0x07] = KEY_3,
+	[0x08] = KEY_AUDIO,
+	[0x09] = KEY_4,
+	[0x0a] = KEY_5,
+	[0x0b] = KEY_6,
+	[0x0c] = KEY_ZOOM,		/* Full screen */
+	[0x0d] = KEY_7,
+	[0x0e] = KEY_8,
+	[0x0f] = KEY_9,
+	[0x10] = KEY_PAGEUP,		/* 16-CH PREV */
+	[0x11] = KEY_0,
+	[0x12] = KEY_INFO,
+	[0x13] = KEY_AGAIN,		/* CH RTN - channel return */
+	[0x14] = KEY_MUTE,
+	[0x15] = KEY_EDIT,		/* Autoscan */
+	[0x17] = KEY_SAVE,		/* Screenshot */
+	[0x18] = KEY_PLAYPAUSE,
+	[0x19] = KEY_RECORD,
+	[0x1a] = KEY_PLAY,
+	[0x1b] = KEY_STOP,
+	[0x1c] = KEY_FASTFORWARD,
+	[0x1d] = KEY_REWIND,
+	[0x1e] = KEY_VOLUMEDOWN,
+	[0x1f] = KEY_VOLUMEUP,
+	[0x22] = KEY_SLEEP,		/* Sleep */
+	[0x23] = KEY_ZOOM,		/* Aspect */
+	[0x26] = KEY_SCREEN,		/* Pos */
+	[0x27] = KEY_ANGLE,		/* Size */
+	[0x28] = KEY_SELECT,		/* Select */
+	[0x29] = KEY_BLUE,		/* Blue/Picture */
+	[0x2a] = KEY_BACKSPACE,	/* Back */
+	[0x2b] = KEY_MEDIA,		/* PIP (Picture-in-picture) */
+	[0x2c] = KEY_DOWN,
+	[0x2e] = KEY_DOT,
+	[0x2f] = KEY_TV,		/* Live TV */
+	[0x32] = KEY_LEFT,
+	[0x33] = KEY_CLEAR,		/* Clear */
+	[0x35] = KEY_RED,		/* Red/TV */
+	[0x36] = KEY_UP,
+	[0x37] = KEY_HOME,		/* Home */
+	[0x39] = KEY_GREEN,		/* Green/Video */
+	[0x3d] = KEY_YELLOW,		/* Yellow/Music */
+	[0x3e] = KEY_OK,		/* Ok */
+	[0x3f] = KEY_RIGHT,
+	[0x40] = KEY_NEXT,		/* Next */
+	[0x41] = KEY_PREVIOUS,	/* Previous */
+	[0x42] = KEY_CHANNELDOWN,	/* Channel down */
+	[0x43] = KEY_CHANNELUP	/* Channel up */
+};
+EXPORT_SYMBOL_GPL(ir_codes_avermedia_cardbus);
+
 /* Attila Kondoros <attila.kondoros@chello.hu> */
 IR_KEYTAB_TYPE ir_codes_apac_viewcomp[IR_KEYTAB_SIZE] = {
 
diff --git a/linux/drivers/media/common/tuners/mt2060.c b/linux/drivers/media/common/tuners/mt2060.c
index d1962bb24..1f1fe90cb 100644
--- a/linux/drivers/media/common/tuners/mt2060.c
+++ b/linux/drivers/media/common/tuners/mt2060.c
@@ -285,7 +285,7 @@ static void mt2060_calibrate(struct mt2060_priv *priv)
 	while (i++ < 10 && mt2060_readreg(priv, REG_MISC_STAT, &b) == 0 && (b & (1 << 6)) == 0)
 		msleep(20);
 
-	if (i < 10) {
+	if (i <= 10) {
 		mt2060_readreg(priv, REG_FM_FREQ, &priv->fmfreq); // now find out, what is fmreq used for :)
 		dprintk("calibration was successful: %d", (int)priv->fmfreq);
 	} else
diff --git a/linux/drivers/media/dvb/dvb-core/dmxdev.c b/linux/drivers/media/dvb/dvb-core/dmxdev.c
index cc143929a..c35fbb8d8 100644
--- a/linux/drivers/media/dvb/dvb-core/dmxdev.c
+++ b/linux/drivers/media/dvb/dvb-core/dmxdev.c
@@ -364,16 +364,15 @@ static int dvb_dmxdev_section_callback(const u8 *buffer1, size_t buffer1_len,
 				       enum dmx_success success)
 {
 	struct dmxdev_filter *dmxdevfilter = filter->priv;
-	unsigned long flags;
 	int ret;
 
 	if (dmxdevfilter->buffer.error) {
 		wake_up(&dmxdevfilter->buffer.queue);
 		return 0;
 	}
-	spin_lock_irqsave(&dmxdevfilter->dev->lock, flags);
+	spin_lock(&dmxdevfilter->dev->lock);
 	if (dmxdevfilter->state != DMXDEV_STATE_GO) {
-		spin_unlock_irqrestore(&dmxdevfilter->dev->lock, flags);
+		spin_unlock(&dmxdevfilter->dev->lock);
 		return 0;
 	}
 	del_timer(&dmxdevfilter->timer);
@@ -392,7 +391,7 @@ static int dvb_dmxdev_section_callback(const u8 *buffer1, size_t buffer1_len,
 	}
 	if (dmxdevfilter->params.sec.flags & DMX_ONESHOT)
 		dmxdevfilter->state = DMXDEV_STATE_DONE;
-	spin_unlock_irqrestore(&dmxdevfilter->dev->lock, flags);
+	spin_unlock(&dmxdevfilter->dev->lock);
 	wake_up(&dmxdevfilter->buffer.queue);
 	return 0;
 }
@@ -404,12 +403,11 @@ static int dvb_dmxdev_ts_callback(const u8 *buffer1, size_t buffer1_len,
 {
 	struct dmxdev_filter *dmxdevfilter = feed->priv;
 	struct dvb_ringbuffer *buffer;
-	unsigned long flags;
 	int ret;
 
-	spin_lock_irqsave(&dmxdevfilter->dev->lock, flags);
+	spin_lock(&dmxdevfilter->dev->lock);
 	if (dmxdevfilter->params.pes.output == DMX_OUT_DECODER) {
-		spin_unlock_irqrestore(&dmxdevfilter->dev->lock, flags);
+		spin_unlock(&dmxdevfilter->dev->lock);
 		return 0;
 	}
 
@@ -419,7 +417,7 @@ static int dvb_dmxdev_ts_callback(const u8 *buffer1, size_t buffer1_len,
 	else
 		buffer = &dmxdevfilter->dev->dvr_buffer;
 	if (buffer->error) {
-		spin_unlock_irqrestore(&dmxdevfilter->dev->lock, flags);
+		spin_unlock(&dmxdevfilter->dev->lock);
 		wake_up(&buffer->queue);
 		return 0;
 	}
@@ -430,7 +428,7 @@ static int dvb_dmxdev_ts_callback(const u8 *buffer1, size_t buffer1_len,
 		dvb_ringbuffer_flush(buffer);
 		buffer->error = ret;
 	}
-	spin_unlock_irqrestore(&dmxdevfilter->dev->lock, flags);
+	spin_unlock(&dmxdevfilter->dev->lock);
 	wake_up(&buffer->queue);
 	return 0;
 }
diff --git a/linux/drivers/media/dvb/dvb-core/dvb_demux.c b/linux/drivers/media/dvb/dvb-core/dvb_demux.c
index a2c1fd5d2..e2eca0b1f 100644
--- a/linux/drivers/media/dvb/dvb-core/dvb_demux.c
+++ b/linux/drivers/media/dvb/dvb-core/dvb_demux.c
@@ -399,9 +399,7 @@ static void dvb_dmx_swfilter_packet(struct dvb_demux *demux, const u8 *buf)
 void dvb_dmx_swfilter_packets(struct dvb_demux *demux, const u8 *buf,
 			      size_t count)
 {
-	unsigned long flags;
-
-	spin_lock_irqsave(&demux->lock, flags);
+	spin_lock(&demux->lock);
 
 	while (count--) {
 		if (buf[0] == 0x47)
@@ -409,17 +407,16 @@ void dvb_dmx_swfilter_packets(struct dvb_demux *demux, const u8 *buf,
 		buf += 188;
 	}
 
-	spin_unlock_irqrestore(&demux->lock, flags);
+	spin_unlock(&demux->lock);
 }
 
 EXPORT_SYMBOL(dvb_dmx_swfilter_packets);
 
 void dvb_dmx_swfilter(struct dvb_demux *demux, const u8 *buf, size_t count)
 {
-	unsigned long flags;
 	int p = 0, i, j;
 
-	spin_lock_irqsave(&demux->lock, flags);
+	spin_lock(&demux->lock);
 
 	if (demux->tsbufp) {
 		i = demux->tsbufp;
@@ -452,18 +449,17 @@ void dvb_dmx_swfilter(struct dvb_demux *demux, const u8 *buf, size_t count)
 	}
 
 bailout:
-	spin_unlock_irqrestore(&demux->lock, flags);
+	spin_unlock(&demux->lock);
 }
 
 EXPORT_SYMBOL(dvb_dmx_swfilter);
 
 void dvb_dmx_swfilter_204(struct dvb_demux *demux, const u8 *buf, size_t count)
 {
-	unsigned long flags;
 	int p = 0, i, j;
 	u8 tmppack[188];
 
-	spin_lock_irqsave(&demux->lock, flags);
+	spin_lock(&demux->lock);
 
 	if (demux->tsbufp) {
 		i = demux->tsbufp;
@@ -504,7 +500,7 @@ void dvb_dmx_swfilter_204(struct dvb_demux *demux, const u8 *buf, size_t count)
 	}
 
 bailout:
-	spin_unlock_irqrestore(&demux->lock, flags);
+	spin_unlock(&demux->lock);
 }
 
 EXPORT_SYMBOL(dvb_dmx_swfilter_204);
diff --git a/linux/drivers/media/video/gspca/Kconfig b/linux/drivers/media/video/gspca/Kconfig
index 11c5d2fc2..a0f05ef5c 100644
--- a/linux/drivers/media/video/gspca/Kconfig
+++ b/linux/drivers/media/video/gspca/Kconfig
@@ -176,6 +176,15 @@ config USB_GSPCA_SPCA561
 	  To compile this driver as a module, choose M here: the
 	  module will be called gspca_spca561.
 
+config USB_GSPCA_SQ905
+	tristate "SQ Technologies SQ905 based USB Camera Driver"
+	depends on VIDEO_V4L2 && USB_GSPCA
+	help
+	  Say Y here if you want support for cameras based on the SQ905 chip.
+
+	  To compile this driver as a module, choose M here: the
+	  module will be called gspca_sq905.
+
 config USB_GSPCA_STK014
 	tristate "Syntek DV4000 (STK014) USB Camera Driver"
 	depends on VIDEO_V4L2 && USB_GSPCA
diff --git a/linux/drivers/media/video/gspca/Makefile b/linux/drivers/media/video/gspca/Makefile
index b3cbcc176..b6ec61185 100644
--- a/linux/drivers/media/video/gspca/Makefile
+++ b/linux/drivers/media/video/gspca/Makefile
@@ -16,6 +16,7 @@ obj-$(CONFIG_USB_GSPCA_SPCA505)  += gspca_spca505.o
 obj-$(CONFIG_USB_GSPCA_SPCA506)  += gspca_spca506.o
 obj-$(CONFIG_USB_GSPCA_SPCA508)  += gspca_spca508.o
 obj-$(CONFIG_USB_GSPCA_SPCA561)  += gspca_spca561.o
+obj-$(CONFIG_USB_GSPCA_SQ905)    += gspca_sq905.o
 obj-$(CONFIG_USB_GSPCA_SUNPLUS)  += gspca_sunplus.o
 obj-$(CONFIG_USB_GSPCA_STK014)   += gspca_stk014.o
 obj-$(CONFIG_USB_GSPCA_T613)     += gspca_t613.o
@@ -41,6 +42,7 @@ gspca_spca505-objs  := spca505.o
 gspca_spca506-objs  := spca506.o
 gspca_spca508-objs  := spca508.o
 gspca_spca561-objs  := spca561.o
+gspca_sq905-objs    := sq905.o
 gspca_stk014-objs   := stk014.o
 gspca_sunplus-objs  := sunplus.o
 gspca_t613-objs     := t613.o
diff --git a/linux/drivers/media/video/gspca/gspca.c b/linux/drivers/media/video/gspca/gspca.c
index cac937040..8d78b9287 100644
--- a/linux/drivers/media/video/gspca/gspca.c
+++ b/linux/drivers/media/video/gspca/gspca.c
@@ -136,11 +136,13 @@ static void fill_frame(struct gspca_dev *gspca_dev,
 	cam_pkt_op pkt_scan;
 
 	if (urb->status != 0) {
+		if (urb->status == -ESHUTDOWN)
+			return;		/* disconnection */
 #ifdef CONFIG_PM
 		if (!gspca_dev->frozen)
 #endif
 			PDEBUG(D_ERR|D_PACK, "urb status: %d", urb->status);
-		return;		/* disconnection ? */
+		return;
 	}
 	pkt_scan = gspca_dev->sd_desc->pkt_scan;
 	for (i = 0; i < urb->number_of_packets; i++) {
@@ -220,6 +222,8 @@ static void bulk_irq(struct urb *urb)
 	switch (urb->status) {
 	case 0:
 		break;
+	case -ESHUTDOWN:
+		return;		/* disconnection */
 	case -ECONNRESET:
 		urb->status = 0;
 		break;
@@ -228,7 +232,7 @@ static void bulk_irq(struct urb *urb)
 		if (!gspca_dev->frozen)
 #endif
 			PDEBUG(D_ERR|D_PACK, "urb status: %d", urb->status);
-		return;		/* disconnection ? */
+		return;
 	}
 
 	/* check the availability of the frame buffer */
@@ -435,8 +439,7 @@ static void destroy_urbs(struct gspca_dev *gspca_dev)
 			break;
 
 		gspca_dev->urb[i] = NULL;
-		if (!gspca_dev->present)
-			usb_kill_urb(urb);
+		usb_kill_urb(urb);
 		if (urb->transfer_buffer != NULL)
 			usb_buffer_free(gspca_dev->dev,
 					urb->transfer_buffer_length,
@@ -604,6 +607,11 @@ static int gspca_init_transfer(struct gspca_dev *gspca_dev)
 	if (mutex_lock_interruptible(&gspca_dev->usb_lock))
 		return -ERESTARTSYS;
 
+	if (!gspca_dev->present) {
+		ret = -ENODEV;
+		goto out;
+	}
+
 	/* set the higher alternate setting and
 	 * loop until urb submit succeeds */
 	gspca_dev->alt = gspca_dev->nbalt;
@@ -673,12 +681,14 @@ static int gspca_set_alt0(struct gspca_dev *gspca_dev)
 static void gspca_stream_off(struct gspca_dev *gspca_dev)
 {
 	gspca_dev->streaming = 0;
-	if (gspca_dev->present
-	    && gspca_dev->sd_desc->stopN)
-		gspca_dev->sd_desc->stopN(gspca_dev);
-	destroy_urbs(gspca_dev);
-	if (gspca_dev->present)
+	if (gspca_dev->present) {
+		if (gspca_dev->sd_desc->stopN)
+			gspca_dev->sd_desc->stopN(gspca_dev);
+		destroy_urbs(gspca_dev);
 		gspca_set_alt0(gspca_dev);
+	}
+
+	/* always call stop0 to free the subdriver's resources */
 	if (gspca_dev->sd_desc->stop0)
 		gspca_dev->sd_desc->stop0(gspca_dev);
 	PDEBUG(D_STREAM, "stream off OK");
@@ -960,8 +970,17 @@ static int vidioc_querycap(struct file *file, void  *priv,
 			   struct v4l2_capability *cap)
 {
 	struct gspca_dev *gspca_dev = priv;
+	int ret;
 
 	memset(cap, 0, sizeof *cap);
+
+	/* protect the access to the usb device */
+	if (mutex_lock_interruptible(&gspca_dev->usb_lock))
+		return -ERESTARTSYS;
+	if (!gspca_dev->present) {
+		ret = -ENODEV;
+		goto out;
+	}
 	strncpy(cap->driver, gspca_dev->sd_desc->name, sizeof cap->driver);
 	if (gspca_dev->dev->product != NULL) {
 		strncpy(cap->card, gspca_dev->dev->product,
@@ -977,7 +996,10 @@ static int vidioc_querycap(struct file *file, void  *priv,
 	cap->capabilities = V4L2_CAP_VIDEO_CAPTURE
 			  | V4L2_CAP_STREAMING
 			  | V4L2_CAP_READWRITE;
-	return 0;
+	ret = 0;
+out:
+	mutex_unlock(&gspca_dev->usb_lock);
+	return ret;
 }
 
 static int vidioc_queryctrl(struct file *file, void *priv,
@@ -1040,7 +1062,10 @@ static int vidioc_s_ctrl(struct file *file, void *priv,
 		PDEBUG(D_CONF, "set ctrl [%08x] = %d", ctrl->id, ctrl->value);
 		if (mutex_lock_interruptible(&gspca_dev->usb_lock))
 			return -ERESTARTSYS;
-		ret = ctrls->set(gspca_dev, ctrl->value);
+		if (gspca_dev->present)
+			ret = ctrls->set(gspca_dev, ctrl->value);
+		else
+			ret = -ENODEV;
 		mutex_unlock(&gspca_dev->usb_lock);
 		return ret;
 	}
@@ -1064,7 +1089,10 @@ static int vidioc_g_ctrl(struct file *file, void *priv,
 			return -EINVAL;
 		if (mutex_lock_interruptible(&gspca_dev->usb_lock))
 			return -ERESTARTSYS;
-		ret = ctrls->get(gspca_dev, &ctrl->value);
+		if (gspca_dev->present)
+			ret = ctrls->get(gspca_dev, &ctrl->value);
+		else
+			ret = -ENODEV;
 		mutex_unlock(&gspca_dev->usb_lock);
 		return ret;
 	}
@@ -1226,10 +1254,7 @@ static int vidioc_streamon(struct file *file, void *priv,
 		return -EINVAL;
 	if (mutex_lock_interruptible(&gspca_dev->queue_lock))
 		return -ERESTARTSYS;
-	if (!gspca_dev->present) {
-		ret = -ENODEV;
-		goto out;
-	}
+
 	if (gspca_dev->nframes == 0
 	    || !(gspca_dev->frame[0].v4l2_buf.flags & V4L2_BUF_FLAG_QUEUED)) {
 		ret = -EINVAL;
@@ -1297,7 +1322,10 @@ static int vidioc_g_jpegcomp(struct file *file, void *priv,
 		return -EINVAL;
 	if (mutex_lock_interruptible(&gspca_dev->usb_lock))
 		return -ERESTARTSYS;
-	ret = gspca_dev->sd_desc->get_jcomp(gspca_dev, jpegcomp);
+	if (gspca_dev->present)
+		ret = gspca_dev->sd_desc->get_jcomp(gspca_dev, jpegcomp);
+	else
+		ret = -ENODEV;
 	mutex_unlock(&gspca_dev->usb_lock);
 	return ret;
 }
@@ -1312,7 +1340,10 @@ static int vidioc_s_jpegcomp(struct file *file, void *priv,
 		return -EINVAL;
 	if (mutex_lock_interruptible(&gspca_dev->usb_lock))
 		return -ERESTARTSYS;
-	ret = gspca_dev->sd_desc->set_jcomp(gspca_dev, jpegcomp);
+	if (gspca_dev->present)
+		ret = gspca_dev->sd_desc->set_jcomp(gspca_dev, jpegcomp);
+	else
+		ret = -ENODEV;
 	mutex_unlock(&gspca_dev->usb_lock);
 	return ret;
 }
@@ -1331,7 +1362,11 @@ static int vidioc_g_parm(struct file *filp, void *priv,
 
 		if (mutex_lock_interruptible(&gspca_dev->usb_lock))
 			return -ERESTARTSYS;
-		ret = gspca_dev->sd_desc->get_streamparm(gspca_dev, parm);
+		if (gspca_dev->present)
+			ret = gspca_dev->sd_desc->get_streamparm(gspca_dev,
+								 parm);
+		else
+			ret = -ENODEV;
 		mutex_unlock(&gspca_dev->usb_lock);
 		return ret;
 	}
@@ -1356,7 +1391,11 @@ static int vidioc_s_parm(struct file *filp, void *priv,
 
 		if (mutex_lock_interruptible(&gspca_dev->usb_lock))
 			return -ERESTARTSYS;
-		ret = gspca_dev->sd_desc->set_streamparm(gspca_dev, parm);
+		if (gspca_dev->present)
+			ret = gspca_dev->sd_desc->set_streamparm(gspca_dev,
+								 parm);
+		else
+			ret = -ENODEV;
 		mutex_unlock(&gspca_dev->usb_lock);
 		return ret;
 	}
@@ -1530,7 +1569,8 @@ static int frame_wait(struct gspca_dev *gspca_dev,
 
 	if (gspca_dev->sd_desc->dq_callback) {
 		mutex_lock(&gspca_dev->usb_lock);
-		gspca_dev->sd_desc->dq_callback(gspca_dev);
+		if (gspca_dev->present)
+			gspca_dev->sd_desc->dq_callback(gspca_dev);
 		mutex_unlock(&gspca_dev->usb_lock);
 	}
 	return j;
@@ -1552,6 +1592,9 @@ static int vidioc_dqbuf(struct file *file, void *priv,
 	if (v4l2_buf->memory != gspca_dev->memory)
 		return -EINVAL;
 
+	if (!gspca_dev->present)
+		return -ENODEV;
+
 	/* if not streaming, be sure the application will not loop forever */
 	if (!(file->f_flags & O_NONBLOCK)
 	    && !gspca_dev->streaming && gspca_dev->users == 1)
@@ -1702,8 +1745,6 @@ static unsigned int dev_poll(struct file *file, poll_table *wait)
 	PDEBUG(D_FRAM, "poll");
 
 	poll_wait(file, &gspca_dev->wq, wait);
-	if (!gspca_dev->present)
-		return POLLERR;
 
 	/* if reqbufs is not done, the user would use read() */
 	if (gspca_dev->nframes == 0) {
@@ -1716,10 +1757,6 @@ static unsigned int dev_poll(struct file *file, poll_table *wait)
 
 	if (mutex_lock_interruptible(&gspca_dev->queue_lock) != 0)
 		return POLLERR;
-	if (!gspca_dev->present) {
-		ret = POLLERR;
-		goto out;
-	}
 
 	/* check the next incoming buffer */
 	i = gspca_dev->fr_o;
@@ -1728,8 +1765,9 @@ static unsigned int dev_poll(struct file *file, poll_table *wait)
 		ret = POLLIN | POLLRDNORM;	/* something to read */
 	else
 		ret = 0;
-out:
 	mutex_unlock(&gspca_dev->queue_lock);
+	if (!gspca_dev->present)
+		return POLLHUP;
 	return ret;
 }
 
@@ -1953,8 +1991,18 @@ void gspca_disconnect(struct usb_interface *intf)
 {
 	struct gspca_dev *gspca_dev = usb_get_intfdata(intf);
 
+	mutex_lock(&gspca_dev->usb_lock);
 	gspca_dev->present = 0;
 
+	if (gspca_dev->streaming) {
+		destroy_urbs(gspca_dev);
+		wake_up_interruptible(&gspca_dev->wq);
+	}
+
+	/* the device is freed at exit of this function */
+	gspca_dev->dev = NULL;
+	mutex_unlock(&gspca_dev->usb_lock);
+
 	usb_set_intfdata(intf, NULL);
 
 	/* release the device */
diff --git a/linux/drivers/media/video/gspca/mr97310a.c b/linux/drivers/media/video/gspca/mr97310a.c
index 3a5ddff8f..5ec5ce6e3 100644
--- a/linux/drivers/media/video/gspca/mr97310a.c
+++ b/linux/drivers/media/video/gspca/mr97310a.c
@@ -73,7 +73,7 @@ static int reg_w(struct gspca_dev *gspca_dev, int len)
 
 	rc = usb_bulk_msg(gspca_dev->dev,
 			  usb_sndbulkpipe(gspca_dev->dev, 4),
-			  gspca_dev->usb_buf, len, 0, 500);
+			  gspca_dev->usb_buf, len, NULL, 500);
 	if (rc < 0)
 		PDEBUG(D_ERR, "reg write [%02x] error %d",
 		       gspca_dev->usb_buf[0], rc);
diff --git a/linux/drivers/media/video/gspca/sonixj.c b/linux/drivers/media/video/gspca/sonixj.c
index 0aa4649bd..5cdb643b8 100644
--- a/linux/drivers/media/video/gspca/sonixj.c
+++ b/linux/drivers/media/video/gspca/sonixj.c
@@ -45,7 +45,7 @@ struct sd {
 	u8 blue;
 	u8 red;
 	u8 gamma;
-	u8 vflip;			/* ov7630 only */
+	u8 vflip;			/* ov7630/ov7648 only */
 	u8 infrared;			/* mt9v111 only */
 
 	s8 ag_cnt;
@@ -192,7 +192,7 @@ static struct ctrl sd_ctrls[] = {
 	    .set = sd_setautogain,
 	    .get = sd_getautogain,
 	},
-/* ov7630 only */
+/* ov7630/ov7648 only */
 #define VFLIP_IDX 6
 	{
 	    {
@@ -202,7 +202,7 @@ static struct ctrl sd_ctrls[] = {
 		.minimum = 0,
 		.maximum = 1,
 		.step    = 1,
-#define VFLIP_DEF 1
+#define VFLIP_DEF 0			/* vflip def = 1 for ov7630 */
 		.default_value = VFLIP_DEF,
 	    },
 	    .set = sd_setvflip,
@@ -235,16 +235,16 @@ static __u32 ctrl_dis[] = {
 	(1 << INFRARED_IDX) | (1 << VFLIP_IDX),
 						/* SENSOR_MO4000 2 */
 #if 1
-	0,
+	(1 << VFLIP_IDX),
 #else
-	(1 << AUTOGAIN_IDX),
+	(1 << AUTOGAIN_IDX) | (1 << VFLIP_IDX),
 #endif
 						/* SENSOR_MT9V111 3 */
 	(1 << INFRARED_IDX) | (1 << VFLIP_IDX),
 						/* SENSOR_OM6802 4 */
 	(1 << AUTOGAIN_IDX) | (1 << INFRARED_IDX),
 						/* SENSOR_OV7630 5 */
-	(1 << AUTOGAIN_IDX) | (1 << INFRARED_IDX) | (1 << VFLIP_IDX),
+	(1 << INFRARED_IDX),
 						/* SENSOR_OV7648 6 */
 	(1 << AUTOGAIN_IDX) | (1 << INFRARED_IDX) | (1 << VFLIP_IDX),
 						/* SENSOR_OV7660 7 */
@@ -677,7 +677,8 @@ static const u8 ov7648_sensor_init[][8] = {
 	{0xb1, 0x21, 0x2d, 0x85, 0x00, 0x00, 0x00, 0x10},
 /*...*/
 /*	{0xa1, 0x21, 0x12, 0x08, 0x00, 0x00, 0x00, 0x10}, jfm done */
-/*	{0xa1, 0x21, 0x75, 0x06, 0x00, 0x00, 0x00, 0x10}, jfm done */
+/*	{0xa1, 0x21, 0x75, 0x06, 0x00, 0x00, 0x00, 0x10},   * COMN
+							 * set by setvflip */
 	{0xa1, 0x21, 0x19, 0x02, 0x00, 0x00, 0x00, 0x10},
 	{0xa1, 0x21, 0x10, 0x32, 0x00, 0x00, 0x00, 0x10},
 /*	{0xa1, 0x21, 0x16, 0x00, 0x00, 0x00, 0x00, 0x10}, jfm done */
@@ -1031,7 +1032,7 @@ static void mi0360_probe(struct gspca_dev *gspca_dev)
 {
 	struct sd *sd = (struct sd *) gspca_dev;
 	int i, j;
-	u16 val;
+	u16 val = 0;
 	static const u8 probe_tb[][4][8] = {
 	    {					/* mi0360 */
 		{0xb0, 0x5d, 0x07, 0x00, 0x02, 0x00, 0x00, 0x10},
@@ -1319,7 +1320,10 @@ static int sd_config(struct gspca_dev *gspca_dev,
 	sd->gamma = GAMMA_DEF;
 	sd->autogain = AUTOGAIN_DEF;
 	sd->ag_cnt = -1;
-	sd->vflip = VFLIP_DEF;
+	if (sd->sensor != SENSOR_OV7630)
+		sd->vflip = 0;
+	else
+		sd->vflip = 1;
 	sd->infrared = INFRARED_DEF;
 
 	gspca_dev->ctrl_dis = ctrl_dis[sd->sensor];
@@ -1589,16 +1593,39 @@ static void setautogain(struct gspca_dev *gspca_dev)
 
 	if (gspca_dev->ctrl_dis & (1 << AUTOGAIN_IDX))
 		return;
+	switch (sd->sensor) {
+	case SENSOR_OV7630:
+	case SENSOR_OV7648: {
+		u8 comb;
+
+		if (sd->sensor == SENSOR_OV7630)
+			comb = 0xc0;
+		else
+			comb = 0xa0;
+		if (sd->autogain)
+			comb |= 0x02;
+		i2c_w1(&sd->gspca_dev, 0x13, comb);
+		return;
+	    }
+	}
 	if (sd->autogain)
 		sd->ag_cnt = AG_CNT_START;
 	else
 		sd->ag_cnt = -1;
 }
 
+/* ov7630/ov7648 only */
 static void setvflip(struct sd *sd)
 {
-	i2c_w1(&sd->gspca_dev, 0x75,			/* COMN */
-		sd->vflip ? 0x82 : 0x02);
+	u8 comn;
+
+	if (sd->sensor == SENSOR_OV7630)
+		comn = 0x02;
+	else
+		comn = 0x06;
+	if (sd->vflip)
+		comn |= 0x80;
+	i2c_w1(&sd->gspca_dev, 0x75, comn);
 }
 
 static void setinfrared(struct sd *sd)
diff --git a/linux/drivers/media/video/gspca/spca505.c b/linux/drivers/media/video/gspca/spca505.c
index 4fc54d8b8..2acec58b1 100644
--- a/linux/drivers/media/video/gspca/spca505.c
+++ b/linux/drivers/media/video/gspca/spca505.c
@@ -426,8 +426,8 @@ static const u8 spca505b_open_data_ccd[][3] = {
 	{0x05, 0x00, 0x11},
 	{0x05, 0x00, 0x12},
 	{0x05, 0x6f, 0x00},
-	{0x05, (u8) (initial_brightness >> 6), 0x00},
-	{0x05, (u8) (initial_brightness << 2), 0x01},
+	{0x05, initial_brightness >> 6, 0x00},
+	{0x05, (initial_brightness << 2) & 0xff, 0x01},
 	{0x05, 0x00, 0x02},
 	{0x05, 0x01, 0x03},
 	{0x05, 0x00, 0x04},
@@ -560,8 +560,8 @@ static const u8 spca505b_open_data_ccd[][3] = {
 	{0x06, 0x5f, 0x1f},
 	{0x06, 0x32, 0x20},
 
-	{0x05, (u8) (initial_brightness >> 6), 0x00},
-	{0x05, (u8) (initial_brightness << 2), 0x01},
+	{0x05, initial_brightness >> 6, 0x00},
+	{0x05, (initial_brightness << 2) & 0xff, 0x01},
 	{0x05, 0x06, 0xc1},
 	{0x05, 0x58, 0xc2},
 	{0x05, 0x00, 0xca},
diff --git a/linux/drivers/media/video/gspca/sq905.c b/linux/drivers/media/video/gspca/sq905.c
new file mode 100644
index 000000000..dafaed69e
--- /dev/null
+++ b/linux/drivers/media/video/gspca/sq905.c
@@ -0,0 +1,438 @@
+/*
+ * SQ905 subdriver
+ *
+ * Copyright (C) 2008, 2009 Adam Baker and Theodore Kilgore
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ */
+
+/*
+ * History and Acknowledgments
+ *
+ * The original Linux driver for SQ905 based cameras was written by
+ * Marcell Lengyel and furter developed by many other contributers
+ * and is available from http://sourceforge.net/projects/sqcam/
+ *
+ * This driver takes advantage of the reverse engineering work done for
+ * that driver and for libgphoto2 but shares no code with them.
+ *
+ * This driver has used as a base the finepix driver and other gspca
+ * based drivers and may still contain code fragments taken from those
+ * drivers.
+ */
+
+#define MODULE_NAME "sq905"
+
+#include <linux/workqueue.h>
+#include "gspca.h"
+
+MODULE_AUTHOR("Adam Baker <linux@baker-net.org.uk>, "
+		"Theodore Kilgore <kilgota@auburn.edu>");
+MODULE_DESCRIPTION("GSPCA/SQ905 USB Camera Driver");
+MODULE_LICENSE("GPL");
+
+/* Default timeouts, in ms */
+#define SQ905_CMD_TIMEOUT 500
+#define SQ905_DATA_TIMEOUT 1000
+
+/* Maximum transfer size to use. */
+#define SQ905_MAX_TRANSFER 0x8000
+#define FRAME_HEADER_LEN 64
+
+/* The known modes, or registers. These go in the "value" slot. */
+
+/* 00 is "none" obviously */
+
+#define SQ905_BULK_READ	0x03	/* precedes any bulk read */
+#define SQ905_COMMAND	0x06	/* precedes the command codes below */
+#define SQ905_PING	0x07	/* when reading an "idling" command */
+#define SQ905_READ_DONE 0xc0    /* ack bulk read completed */
+
+/* Some command codes. These go in the "index" slot. */
+
+#define SQ905_ID      0xf0	/* asks for model string */
+#define SQ905_CONFIG  0x20	/* gets photo alloc. table, not used here */
+#define SQ905_DATA    0x30	/* accesses photo data, not used here */
+#define SQ905_CLEAR   0xa0	/* clear everything */
+#define SQ905_CAPTURE_LOW 0x60	/* Starts capture at 160x120 */
+#define SQ905_CAPTURE_MED 0x61	/* Starts capture at 320x240 */
+/* note that the capture command also controls the output dimensions */
+/* 0x60 -> 160x120, 0x61 -> 320x240 0x62 -> 640x480 depends on camera */
+/* 0x62 is not correct, at least for some cams. Should be 0x63 ? */
+
+/* Structure to hold all of our device specific stuff */
+struct sd {
+	struct gspca_dev gspca_dev;	/* !! must be the first item */
+
+	u8 cam_type;
+
+	/*
+	 * Driver stuff
+	 */
+	struct work_struct work_struct;
+	struct workqueue_struct *work_thread;
+};
+
+/* The driver only supports 320x240 so far. */
+static struct v4l2_pix_format sq905_mode[1] = {
+	{ 320, 240, V4L2_PIX_FMT_SBGGR8, V4L2_FIELD_NONE,
+		.bytesperline = 320,
+		.sizeimage = 320 * 240,
+		.colorspace = V4L2_COLORSPACE_SRGB,
+		.priv = 0}
+};
+
+struct cam_type {
+	u32 ident_word;
+	char *name;
+	struct v4l2_pix_format *min_mode;
+	u8 num_modes;
+	u8 sensor_flags;
+};
+
+#define SQ905_FLIP_HORIZ (1 << 0)
+#define SQ905_FLIP_VERT  (1 << 1)
+
+/* Last entry is default if nothing else matches */
+static struct cam_type cam_types[] = {
+	{ 0x19010509, "PocketCam", &sq905_mode[0], 1, SQ905_FLIP_HORIZ },
+	{ 0x32010509, "Magpix", &sq905_mode[0], 1, SQ905_FLIP_HORIZ },
+	{ 0, "Default", &sq905_mode[0], 1, SQ905_FLIP_HORIZ | SQ905_FLIP_VERT }
+};
+
+/*
+ * Send a command to the camera.
+ */
+static int sq905_command(struct gspca_dev *gspca_dev, u16 index)
+{
+	int ret;
+
+	gspca_dev->usb_buf[0] = '\0';
+	ret = usb_control_msg(gspca_dev->dev,
+			      usb_sndctrlpipe(gspca_dev->dev, 0),
+			      USB_REQ_SYNCH_FRAME,                /* request */
+			      USB_DIR_OUT | USB_TYPE_VENDOR | USB_RECIP_DEVICE,
+			      SQ905_COMMAND, index, gspca_dev->usb_buf, 1,
+			      SQ905_CMD_TIMEOUT);
+	if (ret < 0) {
+		PDEBUG(D_ERR, "%s: usb_control_msg failed (%d)",
+			__func__, ret);
+		return ret;
+	}
+
+	ret = usb_control_msg(gspca_dev->dev,
+			      usb_sndctrlpipe(gspca_dev->dev, 0),
+			      USB_REQ_SYNCH_FRAME,                /* request */
+			      USB_DIR_IN | USB_TYPE_VENDOR | USB_RECIP_DEVICE,
+			      SQ905_PING, 0, gspca_dev->usb_buf, 1,
+			      SQ905_CMD_TIMEOUT);
+	if (ret < 0) {
+		PDEBUG(D_ERR, "%s: usb_control_msg failed 2 (%d)",
+			__func__, ret);
+		return ret;
+	}
+
+	return 0;
+}
+
+/*
+ * Acknowledge the end of a frame - see warning on sq905_command.
+ */
+static int sq905_ack_frame(struct gspca_dev *gspca_dev)
+{
+	int ret;
+
+	gspca_dev->usb_buf[0] = '\0';
+	ret = usb_control_msg(gspca_dev->dev,
+			      usb_sndctrlpipe(gspca_dev->dev, 0),
+			      USB_REQ_SYNCH_FRAME,                /* request */
+			      USB_DIR_OUT | USB_TYPE_VENDOR | USB_RECIP_DEVICE,
+			      SQ905_READ_DONE, 0, gspca_dev->usb_buf, 1,
+			      SQ905_CMD_TIMEOUT);
+	if (ret < 0) {
+		PDEBUG(D_ERR, "%s: usb_control_msg failed (%d)", __func__, ret);
+		return ret;
+	}
+
+	return 0;
+}
+
+/*
+ *  request and read a block of data - see warning on sq905_command.
+ */
+static int
+sq905_read_data(struct gspca_dev *gspca_dev, u8 *data, int size)
+{
+	int ret;
+	int act_len;
+
+	gspca_dev->usb_buf[0] = '\0';
+	ret = usb_control_msg(gspca_dev->dev,
+			      usb_sndctrlpipe(gspca_dev->dev, 0),
+			      USB_REQ_SYNCH_FRAME,                /* request */
+			      USB_DIR_OUT | USB_TYPE_VENDOR | USB_RECIP_DEVICE,
+			      SQ905_BULK_READ, size, gspca_dev->usb_buf,
+			      1, SQ905_CMD_TIMEOUT);
+	if (ret < 0) {
+		PDEBUG(D_ERR, "%s: usb_control_msg failed (%d)", __func__, ret);
+		return ret;
+	}
+	ret = usb_bulk_msg(gspca_dev->dev,
+			   usb_rcvbulkpipe(gspca_dev->dev, 0x81),
+			   data, size, &act_len, SQ905_DATA_TIMEOUT);
+
+	/* successful, it returns 0, otherwise  negative */
+	if (ret < 0 || act_len != size) {
+		PDEBUG(D_ERR, "bulk read fail (%d) len %d/%d",
+			ret, act_len, size);
+		return -EIO;
+	}
+	return 0;
+}
+
+/* This function is called as a workqueue function and runs whenever the camera
+ * is streaming data. Because it is a workqueue function it is allowed to sleep
+ * so we can use synchronous USB calls. To avoid possible collisions with other
+ * threads attempting to use the camera's USB interface we take the gspca
+ * usb_lock when performing USB operations. In practice the only thing we need
+ * to protect against is the usb_set_interface call that gspca makes during
+ * stream_off as the camera doesn't provide any controls that the user could try
+ * to change.
+ */
+static void sq905_dostream(struct work_struct *work)
+{
+	struct sd *dev = container_of(work, struct sd, work_struct);
+	struct gspca_dev *gspca_dev = &dev->gspca_dev;
+	struct gspca_frame *frame;
+	int bytes_left; /* bytes remaining in current frame. */
+	int data_len;   /* size to use for the next read. */
+	int header_read; /* true if we have already read the frame header. */
+	int discarding; /* true if we failed to get space for frame. */
+	int packet_type;
+	int ret;
+	u8 *data;
+	u8 *buffer;
+
+	buffer = kmalloc(SQ905_MAX_TRANSFER, GFP_KERNEL | GFP_DMA);
+	mutex_lock(&gspca_dev->usb_lock);
+	if (!buffer) {
+		PDEBUG(D_ERR, "Couldn't allocate USB buffer");
+		goto quit_stream;
+	}
+
+	while (gspca_dev->present && gspca_dev->streaming) {
+		/* Need a short delay to ensure streaming flag was set by
+		 * gspca and to make sure gspca can grab the mutex. */
+		mutex_unlock(&gspca_dev->usb_lock);
+		msleep(1);
+
+		/* request some data and then read it until we have
+		 * a complete frame. */
+		bytes_left = sq905_mode[0].sizeimage + FRAME_HEADER_LEN;
+		header_read = 0;
+		discarding = 0;
+
+		while (bytes_left > 0) {
+			data_len = bytes_left > SQ905_MAX_TRANSFER ?
+				SQ905_MAX_TRANSFER : bytes_left;
+			mutex_lock(&gspca_dev->usb_lock);
+			if (!gspca_dev->present)
+				goto quit_stream;
+			ret = sq905_read_data(gspca_dev, buffer, data_len);
+			if (ret < 0)
+				goto quit_stream;
+			mutex_unlock(&gspca_dev->usb_lock);
+			PDEBUG(D_STREAM,
+				"Got %d bytes out of %d for frame",
+				data_len, bytes_left);
+			bytes_left -= data_len;
+			data = buffer;
+			if (!header_read) {
+				packet_type = FIRST_PACKET;
+				/* The first 64 bytes of each frame are
+				 * a header full of FF 00 bytes */
+				data += FRAME_HEADER_LEN;
+				data_len -= FRAME_HEADER_LEN;
+				header_read = 1;
+			} else if (bytes_left == 0) {
+				packet_type = LAST_PACKET;
+			} else {
+				packet_type = INTER_PACKET;
+			}
+			frame = gspca_get_i_frame(gspca_dev);
+			if (frame && !discarding)
+				gspca_frame_add(gspca_dev, packet_type,
+						frame, data, data_len);
+			else
+				discarding = 1;
+		}
+		/* acknowledge the frame */
+		mutex_lock(&gspca_dev->usb_lock);
+		if (!gspca_dev->present)
+			goto quit_stream;
+		ret = sq905_ack_frame(gspca_dev);
+		if (ret < 0)
+			goto quit_stream;
+	}
+quit_stream:
+	/* the usb_lock is already acquired */
+	if (gspca_dev->present)
+		sq905_command(gspca_dev, SQ905_CLEAR);
+	mutex_unlock(&gspca_dev->usb_lock);
+	kfree(buffer);
+}
+
+/* This function is called at probe time just before sd_init */
+static int sd_config(struct gspca_dev *gspca_dev,
+		const struct usb_device_id *id)
+{
+	struct cam *cam = &gspca_dev->cam;
+	struct sd *dev = (struct sd *) gspca_dev;
+
+	cam->cam_mode = sq905_mode;
+	cam->nmodes = 1;
+	/* We don't use the buffer gspca allocates so make it small. */
+	cam->bulk_size = 64;
+
+	INIT_WORK(&dev->work_struct, sq905_dostream);
+
+	return 0;
+}
+
+/* called on streamoff with alt==0 and on disconnect */
+/* the usb_lock is held at entry - restore on exit */
+static void sd_stop0(struct gspca_dev *gspca_dev)
+{
+	struct sd *dev = (struct sd *) gspca_dev;
+
+	/* wait for the work queue to terminate */
+	mutex_unlock(&gspca_dev->usb_lock);
+	/* This waits for sq905_dostream to finish */
+	destroy_workqueue(dev->work_thread);
+	dev->work_thread = NULL;
+	mutex_lock(&gspca_dev->usb_lock);
+}
+
+/* this function is called at probe and resume time */
+static int sd_init(struct gspca_dev *gspca_dev)
+{
+	struct sd *dev = (struct sd *) gspca_dev;
+	u32 ident;
+	int ret;
+
+	/* connect to the camera and read
+	 * the model ID and process that and put it away.
+	 */
+	ret = sq905_command(gspca_dev, SQ905_CLEAR);
+	if (ret < 0)
+		return ret;
+	ret = sq905_command(gspca_dev, SQ905_ID);
+	if (ret < 0)
+		return ret;
+	ret = sq905_read_data(gspca_dev, gspca_dev->usb_buf, 4);
+	if (ret < 0)
+		return ret;
+	/* usb_buf is allocated with kmalloc so is aligned. */
+	ident = le32_to_cpup((u32 *)gspca_dev->usb_buf);
+	ret = sq905_command(gspca_dev, SQ905_CLEAR);
+	if (ret < 0)
+		return ret;
+	dev->cam_type = 0;
+	while (dev->cam_type < ARRAY_SIZE(cam_types) - 1 &&
+	       ident != cam_types[dev->cam_type].ident_word)
+		dev->cam_type++;
+	PDEBUG(D_CONF, "SQ905 camera %s, ID %08x detected",
+	       cam_types[dev->cam_type].name, ident);
+	return 0;
+}
+
+/* Set up for getting frames. */
+static int sd_start(struct gspca_dev *gspca_dev)
+{
+	struct sd *dev = (struct sd *) gspca_dev;
+	int ret;
+
+	/* "Open the shutter" and set size, to start capture */
+	ret = sq905_command(&dev->gspca_dev, SQ905_CAPTURE_MED);
+	if (ret < 0) {
+		PDEBUG(D_ERR, "Start streaming command failed");
+		return ret;
+	}
+
+	/* Start the workqueue function to do the streaming */
+	dev->work_thread = create_singlethread_workqueue(MODULE_NAME);
+	queue_work(dev->work_thread, &dev->work_struct);
+
+	return 0;
+}
+
+/* Table of supported USB devices */
+static const __devinitdata struct usb_device_id device_table[] = {
+	{USB_DEVICE(0x2770, 0x9120)},
+	{}
+};
+
+MODULE_DEVICE_TABLE(usb, device_table);
+
+/* sub-driver description */
+static const struct sd_desc sd_desc = {
+	.name   = MODULE_NAME,
+	.config = sd_config,
+	.init   = sd_init,
+	.start  = sd_start,
+	.stop0  = sd_stop0,
+};
+
+/* -- device connect -- */
+static int sd_probe(struct usb_interface *intf,
+		const struct usb_device_id *id)
+{
+	return gspca_dev_probe(intf, id,
+			&sd_desc,
+			sizeof(struct sd),
+			THIS_MODULE);
+}
+
+static struct usb_driver sd_driver = {
+	.name       = MODULE_NAME,
+	.id_table   = device_table,
+	.probe      = sd_probe,
+	.disconnect = gspca_disconnect,
+#ifdef CONFIG_PM
+	.suspend = gspca_suspend,
+	.resume  = gspca_resume,
+#endif
+};
+
+/* -- module insert / remove -- */
+static int __init sd_mod_init(void)
+{
+	int ret;
+
+	ret = usb_register(&sd_driver);
+	if (ret < 0)
+		return ret;
+	PDEBUG(D_PROBE, "registered");
+	return 0;
+}
+
+static void __exit sd_mod_exit(void)
+{
+	usb_deregister(&sd_driver);
+	PDEBUG(D_PROBE, "deregistered");
+}
+
+module_init(sd_mod_init);
+module_exit(sd_mod_exit);
diff --git a/linux/drivers/media/video/gspca/t613.c b/linux/drivers/media/video/gspca/t613.c
index adec0767c..f60a4c21a 100644
--- a/linux/drivers/media/video/gspca/t613.c
+++ b/linux/drivers/media/video/gspca/t613.c
@@ -272,7 +272,7 @@ struct additional_sensor_data {
 	const u8 stream[4];
 };
 
-const static struct additional_sensor_data sensor_data[] = {
+static const struct additional_sensor_data sensor_data[] = {
     {				/* OM6802 */
 	.data1 =
 		{0xc2, 0x28, 0x0f, 0x22, 0xcd, 0x27, 0x2c, 0x06,
@@ -681,19 +681,19 @@ static int sd_init(struct gspca_dev *gspca_dev)
 			| reg_r(gspca_dev, 0x07);
 	switch (sensor_id) {
 	case 0x0801:
-		PDEBUG(D_CONF, "sensor tas5130a");
+		PDEBUG(D_PROBE, "sensor tas5130a");
 		sd->sensor = SENSOR_TAS5130A;
 		break;
 	case 0x0803:
-		PDEBUG(D_CONF, "sensor om6802");
+		PDEBUG(D_PROBE, "sensor 'other'");
 		sd->sensor = SENSOR_OTHER;
 		break;
 	case 0x0807:
-		PDEBUG(D_CONF, "sensor om6802");
+		PDEBUG(D_PROBE, "sensor om6802");
 		sd->sensor = SENSOR_OM6802;
 		break;
 	default:
-		PDEBUG(D_CONF, "unknown sensor %04x", sensor_id);
+		PDEBUG(D_ERR|D_PROBE, "unknown sensor %04x", sensor_id);
 		return -EINVAL;
 	}
 
diff --git a/linux/drivers/media/video/gspca/vc032x.c b/linux/drivers/media/video/gspca/vc032x.c
index 1832d241f..72cbf56c9 100644
--- a/linux/drivers/media/video/gspca/vc032x.c
+++ b/linux/drivers/media/video/gspca/vc032x.c
@@ -2098,6 +2098,7 @@ static void usb_exchange(struct gspca_dev *gspca_dev,
 	/*not reached*/
 }
 
+#if 0
 static void vc0321_reset(struct gspca_dev *gspca_dev)
 {
 	reg_w(gspca_dev->dev, 0xa0, 0x00, 0xb04d);
@@ -2106,6 +2107,7 @@ static void vc0321_reset(struct gspca_dev *gspca_dev)
 	reg_w(gspca_dev->dev, 0xa0, 0x01, 0xb003);
 	msleep(100);
 }
+#endif
 
 /* this function is called at probe time */
 static int sd_config(struct gspca_dev *gspca_dev,
@@ -2118,8 +2120,9 @@ static int sd_config(struct gspca_dev *gspca_dev,
 
 	cam = &gspca_dev->cam;
 	sd->bridge = id->driver_info;
-
+#if 0
 	vc0321_reset(gspca_dev);
+#endif
 	sensor = vc032x_probe_sensor(gspca_dev);
 	switch (sensor) {
 	case -1:
diff --git a/linux/drivers/media/video/ir-kbd-i2c.c b/linux/drivers/media/video/ir-kbd-i2c.c
index a67bed7d7..a99aea49a 100644
--- a/linux/drivers/media/video/ir-kbd-i2c.c
+++ b/linux/drivers/media/video/ir-kbd-i2c.c
@@ -16,6 +16,8 @@
  *      Henry Wong <henry@stuffedcow.net>
  *      Mark Schultz <n9xmj@yahoo.com>
  *      Brian Rogers <brian_rogers@comcast.net>
+ * modified for AVerMedia Cardbus by
+ *      Oldrich Jedlicka <oldium.pro@seznam.cz>
  *
  *  This program is free software; you can redistribute it and/or modify
  *  it under the terms of the GNU General Public License as published by
@@ -217,6 +219,46 @@ static int get_key_knc1(struct IR_i2c *ir, u32 *ir_key, u32 *ir_raw)
 	return 1;
 }
 
+static int get_key_avermedia_cardbus(struct IR_i2c *ir,
+				     u32 *ir_key, u32 *ir_raw)
+{
+	unsigned char subaddr, key, keygroup;
+	struct i2c_msg msg[] = { { .addr = ir->c.addr, .flags = 0,
+				   .buf = &subaddr, .len = 1},
+				 { .addr = ir->c.addr, .flags = I2C_M_RD,
+				  .buf = &key, .len = 1} };
+	subaddr = 0x0d;
+	if (2 != i2c_transfer(ir->c.adapter, msg, 2)) {
+		dprintk(1, "read error\n");
+		return -EIO;
+	}
+
+	if (key == 0xff)
+		return 0;
+
+	subaddr = 0x0b;
+	msg[1].buf = &keygroup;
+	if (2 != i2c_transfer(ir->c.adapter, msg, 2)) {
+		dprintk(1, "read error\n");
+		return -EIO;
+	}
+
+	if (keygroup == 0xff)
+		return 0;
+
+	dprintk(1, "read key 0x%02x/0x%02x\n", key, keygroup);
+	if (keygroup < 2 || keygroup > 3) {
+		/* Only a warning */
+		dprintk(1, "warning: invalid key group 0x%02x for key 0x%02x\n",
+								keygroup, key);
+	}
+	key |= (keygroup & 1) << 6;
+
+	*ir_key = key;
+	*ir_raw = key;
+	return 1;
+}
+
 /* ----------------------------------------------------------------------- */
 
 static void ir_key_poll(struct IR_i2c *ir)
@@ -369,6 +411,12 @@ static int ir_attach(struct i2c_adapter *adap, int addr,
 			ir_type     = IR_TYPE_OTHER;
 		}
 		break;
+	case 0x40:
+		name        = "AVerMedia Cardbus remote";
+		ir->get_key = get_key_avermedia_cardbus;
+		ir_type     = IR_TYPE_OTHER;
+		ir_codes    = ir_codes_avermedia_cardbus;
+		break;
 	default:
 		/* shouldn't happen */
 		printk(DEVNAME ": Huh? unknown i2c address (0x%02x)?\n", addr);
@@ -537,6 +585,22 @@ static int ir_probe(struct i2c_adapter *adap)
 			ir_attach(adap, msg.addr, 0, 0);
 	}
 
+	/* Special case for AVerMedia Cardbus remote */
+	if (adap->id == I2C_HW_SAA7134) {
+		unsigned char subaddr, data;
+		struct i2c_msg msg[] = { { .addr = 0x40, .flags = 0,
+					   .buf = &subaddr, .len = 1},
+					 { .addr = 0x40, .flags = I2C_M_RD,
+					   .buf = &data, .len = 1} };
+		subaddr = 0x0d;
+		rc = i2c_transfer(adap, msg, 2);
+		dprintk(1, "probe 0x%02x/0x%02x @ %s: %s\n",
+			msg[0].addr, subaddr, adap->name,
+			(2 == rc) ? "yes" : "no");
+		if (2 == rc)
+			ir_attach(adap, msg[0].addr, 0, 0);
+	}
+
 	return 0;
 }
 
diff --git a/linux/drivers/media/video/ivtv/ivtv-ioctl.c b/linux/drivers/media/video/ivtv/ivtv-ioctl.c
index aa55a3cc4..9a0424298 100644
--- a/linux/drivers/media/video/ivtv/ivtv-ioctl.c
+++ b/linux/drivers/media/video/ivtv/ivtv-ioctl.c
@@ -391,7 +391,7 @@ static int ivtv_g_fmt_sliced_vbi_cap(struct file *file, void *fh, struct v4l2_fo
 		return 0;
 	}
 
-	v4l2_subdev_call(itv->sd_video, video, s_fmt, fmt);
+	v4l2_subdev_call(itv->sd_video, video, g_fmt, fmt);
 	vbifmt->service_set = ivtv_get_service_set(vbifmt);
 	return 0;
 }
@@ -1752,6 +1752,18 @@ static long ivtv_default(struct file *file, void *fh, int cmd, void *arg)
 		break;
 	}
 
+	case IVTV_IOC_DMA_FRAME:
+	case VIDEO_GET_PTS:
+	case VIDEO_GET_FRAME_COUNT:
+	case VIDEO_GET_EVENT:
+	case VIDEO_PLAY:
+	case VIDEO_STOP:
+	case VIDEO_FREEZE:
+	case VIDEO_CONTINUE:
+	case VIDEO_COMMAND:
+	case VIDEO_TRY_COMMAND:
+		return ivtv_decoder_ioctls(file, cmd, (void *)arg);
+
 	default:
 		return -EINVAL;
 	}
@@ -1794,18 +1806,6 @@ static long ivtv_serialized_ioctl(struct ivtv *itv, struct file *filp,
 		ivtv_vapi(itv, CX2341X_DEC_SET_AUDIO_MODE, 2, itv->audio_bilingual_mode, itv->audio_stereo_mode);
 		return 0;
 
-	case IVTV_IOC_DMA_FRAME:
-	case VIDEO_GET_PTS:
-	case VIDEO_GET_FRAME_COUNT:
-	case VIDEO_GET_EVENT:
-	case VIDEO_PLAY:
-	case VIDEO_STOP:
-	case VIDEO_FREEZE:
-	case VIDEO_CONTINUE:
-	case VIDEO_COMMAND:
-	case VIDEO_TRY_COMMAND:
-		return ivtv_decoder_ioctls(filp, cmd, (void *)arg);
-
 	default:
 		break;
 	}
diff --git a/linux/drivers/media/video/saa7134/saa7134-cards.c b/linux/drivers/media/video/saa7134/saa7134-cards.c
index 01cc9543f..9db045cf5 100644
--- a/linux/drivers/media/video/saa7134/saa7134-cards.c
+++ b/linux/drivers/media/video/saa7134/saa7134-cards.c
@@ -4362,13 +4362,13 @@ struct saa7134_board saa7134_boards[] = {
 			 .amux = TV,
 			 .tv   = 1,
 		 }, {
-			 .name = name_comp,
-			 .vmux = 0,
+			 .name = name_comp1,
+			 .vmux = 3,
 			 .amux = LINE1,
 		 }, {
 			 .name = name_svideo,
 			 .vmux = 8,
-			 .amux = LINE1,
+			 .amux = LINE2,
 		 } },
 		 .radio = {
 			 .name = name_radio,
@@ -6120,6 +6120,11 @@ int saa7134_board_init1(struct saa7134_dev *dev)
 		msleep(10);
 		break;
 	case SAA7134_BOARD_AVERMEDIA_CARDBUS_506:
+		saa7134_set_gpio(dev, 23, 0);
+		msleep(10);
+		saa7134_set_gpio(dev, 23, 1);
+		dev->has_remote = SAA7134_REMOTE_I2C;
+		break;
 	case SAA7134_BOARD_AVERMEDIA_M103:
 		saa7134_set_gpio(dev, 23, 0);
 		msleep(10);
diff --git a/linux/drivers/media/video/saa7134/saa7134-i2c.c b/linux/drivers/media/video/saa7134/saa7134-i2c.c
index 4b4d5ef76..b77ccb5a0 100644
--- a/linux/drivers/media/video/saa7134/saa7134-i2c.c
+++ b/linux/drivers/media/video/saa7134/saa7134-i2c.c
@@ -260,7 +260,7 @@ static int saa7134_i2c_xfer(struct i2c_adapter *i2c_adap,
 			addr  = msgs[i].addr << 1;
 			if (msgs[i].flags & I2C_M_RD)
 				addr |= 1;
-			if (i > 0 && msgs[i].flags & I2C_M_RD) {
+			if (i > 0 && msgs[i].flags & I2C_M_RD && msgs[i].addr != 0x40) {
 				/* workaround for a saa7134 i2c bug
 				 * needed to talk to the mt352 demux
 				 * thanks to pinnacle for the hint */
diff --git a/linux/drivers/media/video/tcm825x.c b/linux/drivers/media/video/tcm825x.c
index 2f823f27a..559ade821 100644
--- a/linux/drivers/media/video/tcm825x.c
+++ b/linux/drivers/media/video/tcm825x.c
@@ -50,7 +50,7 @@ struct tcm825x_sensor {
 };
 
 /* list of image formats supported by TCM825X sensor */
-const static struct v4l2_fmtdesc tcm825x_formats[] = {
+static const struct v4l2_fmtdesc tcm825x_formats[] = {
 	{
 		.description = "YUYV (YUV 4:2:2), packed",
 		.pixelformat = V4L2_PIX_FMT_UYVY,
@@ -76,15 +76,15 @@ const static struct v4l2_fmtdesc tcm825x_formats[] = {
  * TCM825X register configuration for all combinations of pixel format and
  * image size
  */
-const static struct tcm825x_reg subqcif	=	{ 0x20, TCM825X_PICSIZ };
-const static struct tcm825x_reg qcif	=	{ 0x18, TCM825X_PICSIZ };
-const static struct tcm825x_reg cif	=	{ 0x14, TCM825X_PICSIZ };
-const static struct tcm825x_reg qqvga	=	{ 0x0c, TCM825X_PICSIZ };
-const static struct tcm825x_reg qvga	=	{ 0x04, TCM825X_PICSIZ };
-const static struct tcm825x_reg vga	=	{ 0x00, TCM825X_PICSIZ };
+static const struct tcm825x_reg subqcif	=	{ 0x20, TCM825X_PICSIZ };
+static const struct tcm825x_reg qcif	=	{ 0x18, TCM825X_PICSIZ };
+static const struct tcm825x_reg cif	=	{ 0x14, TCM825X_PICSIZ };
+static const struct tcm825x_reg qqvga	=	{ 0x0c, TCM825X_PICSIZ };
+static const struct tcm825x_reg qvga	=	{ 0x04, TCM825X_PICSIZ };
+static const struct tcm825x_reg vga	=	{ 0x00, TCM825X_PICSIZ };
 
-const static struct tcm825x_reg yuv422	=	{ 0x00, TCM825X_PICFMT };
-const static struct tcm825x_reg rgb565	=	{ 0x02, TCM825X_PICFMT };
+static const struct tcm825x_reg yuv422	=	{ 0x00, TCM825X_PICFMT };
+static const struct tcm825x_reg rgb565	=	{ 0x02, TCM825X_PICFMT };
 
 /* Our own specific controls */
 #define V4L2_CID_ALC				V4L2_CID_PRIVATE_BASE
@@ -248,10 +248,10 @@ static struct vcontrol {
 };
 
 
-const static struct tcm825x_reg *tcm825x_siz_reg[NUM_IMAGE_SIZES] =
+static const struct tcm825x_reg *tcm825x_siz_reg[NUM_IMAGE_SIZES] =
 { &subqcif, &qqvga, &qcif, &qvga, &cif, &vga };
 
-const static struct tcm825x_reg *tcm825x_fmt_reg[NUM_PIXEL_FORMATS] =
+static const struct tcm825x_reg *tcm825x_fmt_reg[NUM_PIXEL_FORMATS] =
 { &yuv422, &rgb565 };
 
 /*
diff --git a/linux/drivers/media/video/tcm825x.h b/linux/drivers/media/video/tcm825x.h
index 770ebacfa..5b7e69682 100644
--- a/linux/drivers/media/video/tcm825x.h
+++ b/linux/drivers/media/video/tcm825x.h
@@ -188,7 +188,7 @@ struct tcm825x_platform_data {
 /* Array of image sizes supported by TCM825X.  These must be ordered from
  * smallest image size to largest.
  */
-const static struct capture_size tcm825x_sizes[] = {
+static const struct capture_size tcm825x_sizes[] = {
 	{ 128,  96 }, /* subQCIF */
 	{ 160, 120 }, /* QQVGA */
 	{ 176, 144 }, /* QCIF */
diff --git a/linux/drivers/media/video/tvp514x.c b/linux/drivers/media/video/tvp514x.c
index 8e23aa53c..5f4cbc2b2 100644
--- a/linux/drivers/media/video/tvp514x.c
+++ b/linux/drivers/media/video/tvp514x.c
@@ -686,7 +686,7 @@ static int ioctl_s_routing(struct v4l2_int_device *s,
 			break;	/* Input detected */
 	}
 
-	if ((current_std == STD_INVALID) || (try_count < 0))
+	if ((current_std == STD_INVALID) || (try_count <= 0))
 		return -EINVAL;
 
 	decoder->current_std = current_std;
diff --git a/linux/drivers/media/video/tw9910.c b/linux/drivers/media/video/tw9910.c
index c670b23a1..4593cdea7 100644
--- a/linux/drivers/media/video/tw9910.c
+++ b/linux/drivers/media/video/tw9910.c
@@ -645,6 +645,19 @@ static int tw9910_set_fmt(struct soc_camera_device *icd, __u32 pixfmt,
 	struct tw9910_priv *priv = container_of(icd, struct tw9910_priv, icd);
 	int                 ret  = -EINVAL;
 	u8                  val;
+	int                 i;
+
+	/*
+	 * check color format
+	 */
+	for (i = 0 ; i < ARRAY_SIZE(tw9910_color_fmt) ; i++) {
+		if (pixfmt == tw9910_color_fmt[i].fourcc) {
+			ret = 0;
+			break;
+		}
+	}
+	if (ret < 0)
+		goto tw9910_set_fmt_error;
 
 	/*
 	 * select suitable norm
diff --git a/linux/drivers/media/video/zoran/zoran_driver.c b/linux/drivers/media/video/zoran/zoran_driver.c
index 2609f54d7..798745c0a 100644
--- a/linux/drivers/media/video/zoran/zoran_driver.c
+++ b/linux/drivers/media/video/zoran/zoran_driver.c
@@ -356,9 +356,9 @@ v4l_fbuffer_alloc (struct file *file)
 				SetPageReserved(MAP_NR(mem + off));
 			dprintk(4,
 				KERN_INFO
-				"%s: v4l_fbuffer_alloc() - V4L frame %d mem 0x%lx (bus: 0x%lx)\n",
+				"%s: v4l_fbuffer_alloc() - V4L frame %d mem 0x%lx (bus: 0x%llx)\n",
 				ZR_DEVNAME(zr), i, (unsigned long) mem,
-				virt_to_bus(mem));
+				(unsigned long long)virt_to_bus(mem));
 		} else {
 #if defined(CONFIG_BIGPHYS_AREA)
 			/* Use bigphysarea_alloc_pages */