Added support for the TwinhanDTV Alpha/MagicBox II USB2 DVB-T device in

conjunction with a neat dvb-usb-lib. All dibusb-drivers will be merged to it in
the near future.

17 files changed, 1963 insertions, 2 deletions

diff --git a/linux/Documentation/dvb/README.dvb-usb b/linux/Documentation/dvb/README.dvb-usb
new file mode 100644
index 000000000..0a5c1bc5a
--- /dev/null
+++ b/linux/Documentation/dvb/README.dvb-usb
@@ -0,0 +1,305 @@
+Documentation for dvb-usb-lib module and its devices
+
+Idea behind the dvb-usb-lib
+===========================
+
+In March 2005 I got the new Twinhan USB2.0 DVB-T device. They provided specs and a firmware.
+
+Quite keen I wanted to put the driver (with some quirks of course) into dibusb.
+After reading some specs and doing some USB snooping, it realized, that the
+dibusb-driver would be a complete mess afterwards. So I decided to do it in a
+different way: With the help of a dvb-usb-lib.
+
+The dvb-usb-lib basically contains generic functions which every particular DVB
+USB device would need to handle if it would be on its own.
+
+- Transport Stream URB handling in conjunction with dvb-demux-feed-control
+  (bulk and isoc (TODO) are supported)
+- registering the device for the DVB-API
+- registering an I2C-adapter if applicable
+- remote-control/input-device handling (TODO)
+- firmware requesting and loading (currently just for the Cypress USB
+  controller)
+
+The source code of the particular DVB USB devices does just the communication
+with the device via the bus. The connection between the DVB-API-functionality
+is done via callbacks, assigned in a static device-description (struct
+dvb_usb_device) each device-driver has to have.
+
+For an example have a look in drivers/media/dvb/dvb-usb/vp7045*.
+
+Objective is to migrate all the usb-devices (dibusb, cinergyT2, maybe the
+ttusb; flexcop-usb already benefits from the generic flexcop-device) to use
+the dvb-usb-lib.
+
+The following list is mix of dibusb-devices and real dvb-usb-devices. Sooner or
+later all device will be handled by dvb-usb. Then this line can be removed too.
+
+Supported devices USB1.1
+========================
+
+Produced and reselled by Twinhan:
+---------------------------------
+- TwinhanDTV USB-Ter DVB-T Device (VP7041)
+	http://www.twinhan.com/product_terrestrial_3.asp
+
+- TwinhanDTV Magic Box (VP7041e)
+	http://www.twinhan.com/product_terrestrial_4.asp
+
+- HAMA DVB-T USB device
+	http://www.hama.de/portal/articleId*110620/action*2598
+
+- CTS Portable (Chinese Television System) (2)
+	http://www.2cts.tv/ctsportable/
+
+- Unknown USB DVB-T device with vendor ID Hyper-Paltek
+
+
+Produced and reselled by KWorld:
+--------------------------------
+- KWorld V-Stream XPERT DTV DVB-T USB
+	http://www.kworld.com.tw/en/product/DVBT-USB/DVBT-USB.html
+
+- JetWay DTV DVB-T USB
+	http://www.jetway.com.tw/evisn/product/lcd-tv/DVT-USB/dtv-usb.htm
+
+- ADSTech Instant TV DVB-T USB
+	http://www.adstech.com/products/PTV-333/intro/PTV-333_intro.asp?pid=PTV-333
+
+
+Others:
+-------
+- Ultima Electronic/Artec T1 USB TVBOX (AN2135, AN2235, AN2235 with Panasonic Tuner)
+	http://82.161.246.249/products-tvbox.html
+
+- Compro Videomate DVB-U2000 - DVB-T USB (2)
+	http://www.comprousa.com/products/vmu2000.htm
+
+- Grandtec USB DVB-T
+	http://www.grand.com.tw/
+
+- AVerMedia AverTV DVBT USB
+	http://www.avermedia.com/
+
+- DiBcom USB DVB-T reference device (non-public)
+
+
+Supported devices USB2.0-only
+=============================
+- Twinhan MagicBox II
+	http://www.twinhan.com/product_terrestrial_7.asp
+
+- TwinhanDTV Alpha
+	http://www.twinhan.com/product_terrestrial_8.asp
+
+- Hanftek UMT-010
+	http://www.globalsources.com/si/6008819757082/ProductDetail/Digital-TV/product_id-100046529
+
+
+Supported devices USB2.0 and USB1.1
+=============================
+- Typhoon/Yakumo/HAMA DVB-T mobile USB2.0
+	http://www.yakumo.de/produkte/index.php?pid=1&ag=DVB-T
+
+- Artec T1 USB TVBOX (FX2) (2)
+
+- Hauppauge WinTV NOVA-T USB2
+	http://www.hauppauge.com/
+
+- KWorld/ADSTech Instant DVB-T USB2.0 (DiB3000M-B)
+
+- DiBcom USB2.0 DVB-T reference device (non-public)
+
+- AVerMedia AverTV DVB-T USB2.0
+
+1) It is working almost - work-in-progress.
+2) No test reports received yet.
+
+0. History & News:
+  2005-03-30 - first commit of the dvb-usb-module based on the dibusb-source. First device is a new driver for the
+               TwinhanDTV Alpha / MagicBox II USB2.0-only DVB-T device.
+
+  (change to dvb-usb from dvb-dibusb)
+  2005-03-28 - added support for the AVerMedia AverTV DVB-T USB2.0 device (Thanks to Glen Harris and Jiun-Kuei Jung, AVerMedia)
+  2005-03-14 - added support for the Typhoon/Yakumo/HAMA DVB-T mobile USB2.0
+  2005-02-11 - added support for the KWorld/ADSTech Instant DVB-T USB2.0. Thanks a lot to Joachim von Caron
+  2005-02-02 - added support for the Hauppauge Win-TV Nova-T USB2
+  2005-01-31 - distorted streaming is gone for USB1.1 devices
+  2005-01-13 - moved the mirrored pid_filter_table back to dvb-dibusb
+             - first almost working version for HanfTek UMT-010
+             - found out, that Yakumo/HAMA/Typhoon are predessors of the HanfTek UMT-010
+  2005-01-10 - refactoring completed, now everything is very delightful
+             - tuner quirks for some weird devices (Artec T1 AN2235 device has sometimes a
+               Panasonic Tuner assembled). Tunerprobing implemented. Thanks a lot to Gunnar Wittich.
+  2004-12-29 - after several days of struggling around bug of no returning URBs fixed.
+  2004-12-26 - refactored the dibusb-driver, splitted into separate files
+             - i2c-probing enabled
+  2004-12-06 - possibility for demod i2c-address probing
+             - new usb IDs (Compro, Artec)
+  2004-11-23 - merged changes from DiB3000MC_ver2.1
+             - revised the debugging
+             - possibility to deliver the complete TS for USB2.0
+  2004-11-21 - first working version of the dib3000mc/p frontend driver.
+  2004-11-12 - added additional remote control keys. Thanks to Uwe Hanke.
+  2004-11-07 - added remote control support. Thanks to David Matthews.
+  2004-11-05 - added support for a new devices (Grandtec/Avermedia/Artec)
+             - merged my changes (for dib3000mb/dibusb) to the FE_REFACTORING, because it became HEAD
+             - moved transfer control (pid filter, fifo control) from usb driver to frontend, it seems
+               better settled there (added xfer_ops-struct)
+             - created a common files for frontends (mc/p/mb)
+  2004-09-28 - added support for a new device (Unkown, vendor ID is Hyper-Paltek)
+  2004-09-20 - added support for a new device (Compro DVB-U2000), thanks
+               to Amaury Demol for reporting
+             - changed usb TS transfer method (several urbs, stopping transfer
+               before setting a new pid)
+  2004-09-13 - added support for a new device (Artec T1 USB TVBOX), thanks
+               to Christian Motschke for reporting
+  2004-09-05 - released the dibusb device and dib3000mb-frontend driver
+
+  (old news for vp7041.c)
+  2004-07-15 - found out, by accident, that the device has a TUA6010XS for
+               PLL
+  2004-07-12 - figured out, that the driver should also work with the
+               CTS Portable (Chinese Television System)
+  2004-07-08 - firmware-extraction-2.422-problem solved, driver is now working
+               properly with firmware extracted from 2.422
+             - #if for 2.6.4 (dvb), compile issue
+             - changed firmware handling, see vp7041.txt sec 1.1
+  2004-07-02 - some tuner modifications, v0.1, cleanups, first public
+  2004-06-28 - now using the dvb_dmx_swfilter_packets, everything
+               runs fine now
+  2004-06-27 - able to watch and switching channels (pre-alpha)
+             - no section filtering yet
+  2004-06-06 - first TS received, but kernel oops :/
+  2004-05-14 - firmware loader is working
+  2004-05-11 - start writing the driver
+
+1. How to use?
+NOTE: This driver was developed using Linux 2.6.6.,
+it is working with 2.6.7 and above.
+
+Linux 2.4.x support is not planned, but patches are very welcome.
+
+NOTE: I'm using Debian testing, so the following explaination (especially
+the hotplug-path) needn't match your system, but probably it will :).
+
+The driver is included in the kernel since Linux 2.6.10.
+
+1.1. Firmware
+
+The USB driver needs to download a firmware to start working.
+
+for USB1.1 (AN2135) you need: dvb-dibusb-5.0.0.11.fw
+for USB2.0 HanfTek: dvb-dibusb-umt-2.fw
+for USB2.0 DiBcom: dvb-dibusb-6.0.0.5.fw
+for USB2.0 AVerMedia AverTV DVB-T USB2: dvb-dibusb-avertv-usb2-1.fw
+for USB2.0 TwinhanDTV Alpha/MagicBox II: dvb-usb-vp7045-01.fw
+
+The files can be found on http://www.linuxtv.org/download/firmware/ .
+
+We do not have the permission to publish the following firmware-files.
+You'll need to extract them from the windows drivers.
+
+You should be able to use "get_dvb_firmware dibusb" to get the firmware:
+
+for USB1.1 (AN2235) (a few Artec T1 devices): dvb-dibusb-an2235-1.fw
+for USB2.0 Hauppauge: dvb-dibusb-nova-t-1.fw
+for USB2.0 ADSTech/Kworld USB2.0: dvb-dibusb-adstech-usb2-1.fw
+for USB2.0 Yakumo/Typhoon/Hama: dvb-dtt200u-1.fw
+
+1.2. Compiling
+
+Since the driver is in the linux kernel, activating the driver in
+your favorite config-environment should sufficient. I recommend
+to compile the driver as module. Hotplug does the rest.
+
+1.3. Loading the drivers
+
+Hotplug is able to load the driver, when it is needed (because you plugged
+in the device).
+
+If you want to enable debug output, you have to load the driver manually and
+from withing the dvb-kernel cvs repository.
+
+first have a look, which debug level are available:
+
+modinfo dvb-usb
+modinfo dvb-usb-vp7045
+etc.
+
+modprobe dvb-usb debug=<level>
+modprobe dvb-usb-vp7045 debug=<level>
+etc.
+
+should do the trick.
+
+When the driver is loaded successfully, the firmware file was in
+the right place and the device is connected, the "Power"-LED should be
+turned on.
+
+At this point you should be able to start a dvb-capable application. I'm use
+(t|s)zap, mplayer and dvbscan to test the basics. VDR-xine provides the
+long-term test scenario.
+
+2. Known problems and bugs
+
+- Don't remove the USB device while running an DVB application, your system
+  will go crazy or die most likely.
+
+2.1. Adding support for devices
+
+TODO
+
+2.2. USB1.1 Bandwidth limitation
+
+A lot of the currently supported devices are USB1.1 and thus they have a
+maximum bandwidth of about 5-6 MBit/s when connected to a USB2.0 hub.
+This is not enough for receiving the complete transport stream of a
+DVB-T channel (which is about 16 MBit/s). Normally this is not a
+problem, if you only want to watch TV (this does not apply for HDTV),
+but watching a channel while recording another channel on the same
+frequency simply does not work very well. This applies to all USB1.1
+DVB-T devices, not just the dvb-usb-devices)
+
+The bug, where the TS is distorted by a heavy usage of the device is gone
+definitely. All dvb-usb-devices I was using (Twinhan, Kworld, DiBcom) are
+working like charm now with VDR. Sometimes I even was able to record a channel
+and watch another one.
+
+2.3. Comments
+
+Patches, comments and suggestions are very very welcome.
+
+3. Acknowledgements
+   Amaury Demol (ademol@dibcom.fr) and Francois Kanounnikoff from DiBcom for
+    providing specs, code and help, on which the dvb-dibusb, dib3000mb and
+    dib3000mc are based.
+
+   David Matthews for identifying a new device type (Artec T1 with AN2235)
+    and for extending dibusb with remote control event handling. Thank you.
+
+   Alex Woods for frequently answering question about usb and dvb
+    stuff, a big thank you.
+
+   Bernd Wagner for helping with huge bug reports and discussions.
+
+   Gunnar Wittich and Joachim von Caron for their trust for giving me
+    root-shells on their machines to implement support for new devices.
+
+   Glen Harris for bringing up, that there is a new dibusb-device and Jiun-Kuei
+    Jung from AVerMedia who kindly provided a special firmware to get the device
+    up and running in Linux.
+
+   Jennifer Chen, Jeff and Jack from Twinhan for kindly supporting me by
+	writing the vp7045-driver.
+
+   Some guys on the linux-dvb mailing list for encouraging me
+
+   Peter Schildmann >peter.schildmann-nospam-at-web.de< for his
+    user-level firmware loader, which saves a lot of time
+    (when writing the vp7041 driver)
+
+   Ulf Hermenau for helping me out with traditional chinese.
+
+   André Smoktun and Christian Frömmel for supporting me with
+    hardware and listening to my problems very patient.
diff --git a/linux/drivers/media/dvb/Kconfig b/linux/drivers/media/dvb/Kconfig
index 9942c5d83..6905ac12f 100644
--- a/linux/drivers/media/dvb/Kconfig
+++ b/linux/drivers/media/dvb/Kconfig
@@ -27,6 +27,7 @@ source "drivers/media/dvb/ttpci/Kconfig"
 
 comment "Supported USB Adapters"
 	depends on DVB_CORE && USB
+source "drivers/media/dvb/dvb-usb/Kconfig"
 source "drivers/media/dvb/ttusb-budget/Kconfig"
 source "drivers/media/dvb/ttusb-dec/Kconfig"
 source "drivers/media/dvb/dibusb/Kconfig"
diff --git a/linux/drivers/media/dvb/Makefile b/linux/drivers/media/dvb/Makefile
index 520fc3902..b6d52e31b 100644
--- a/linux/drivers/media/dvb/Makefile
+++ b/linux/drivers/media/dvb/Makefile
@@ -2,4 +2,4 @@
 # Makefile for the kernel multimedia device drivers.
 #
 
-obj-y        := dvb-core/ frontends/ ttpci/ ttusb-dec/ ttusb-budget/ b2c2/ bt8xx/ dibusb/ cinergyT2/
+obj-y        := dvb-core/ frontends/ ttpci/ ttusb-dec/ ttusb-budget/ b2c2/ bt8xx/ dibusb/ cinergyT2/ dvb-usb/
diff --git a/linux/drivers/media/dvb/dibusb/dvb-dibusb-usb.c b/linux/drivers/media/dvb/dibusb/dvb-dibusb-usb.c
index 62e82b13e..41ebc430e 100644
--- a/linux/drivers/media/dvb/dibusb/dvb-dibusb-usb.c
+++ b/linux/drivers/media/dvb/dibusb/dvb-dibusb-usb.c
@@ -249,7 +249,6 @@ int dibusb_urb_init(struct usb_dibusb *dib)
 				dibusb_urb_complete, dib);
 
 		dib->urb_list[i]->transfer_flags = 0;
-
 		dib->init_state |= DIBUSB_STATE_URB_INIT;
 	}
 
diff --git a/linux/drivers/media/dvb/dvb-usb/Kconfig b/linux/drivers/media/dvb/dvb-usb/Kconfig
new file mode 100644
index 000000000..43a695d50
--- /dev/null
+++ b/linux/drivers/media/dvb/dvb-usb/Kconfig
@@ -0,0 +1,26 @@
+config DVB_USB
+	tristate "Support for various USB DVB devices"
+	depends on DVB_CORE && USB
+	select FW_LOADER
+	help
+	  By enabling this you will be able to choose the various USB 1.1 and
+	  USB2.0 DVB devices.
+
+	  Almost every USB device needs a firmware, please look into
+	  <file:Documentation/dvb/README.dvb-usb>
+
+	  Say Y if you own an USB DVB device.
+
+config DVB_USB_DEBUG
+	bool "Enable extended debug support for all DVB-USB devices"
+	depends on DVB_USB
+	help
+	  Say Y if you want to enable debuging. See modinfo dvb-usb (and the
+	  appropriate drivers) for debug levels.
+
+config DVB_USB_VP7045
+	tristate "TwinhanDTV Alpha / MagicBox II DVB-T USB2.0 support
+	depends on DVB_USB
+	help
+	  Say Y here to support the TwinhanDTV Alpha (stick) or the MagicBox II
+	  DVB-T USB2.0 devices.
diff --git a/linux/drivers/media/dvb/dvb-usb/Makefile b/linux/drivers/media/dvb/dvb-usb/Makefile
new file mode 100644
index 000000000..116f1172e
--- /dev/null
+++ b/linux/drivers/media/dvb/dvb-usb/Makefile
@@ -0,0 +1,7 @@
+dvb-usb-objs = dvb-usb-firmware.o dvb-usb-init.o dvb-usb-urb.o dvb-usb-i2c.o dvb-usb-dvb.o
+obj-$(CONFIG_DVB_USB) += dvb-usb.o
+
+dvb-usb-vp7045-objs = vp7045.o vp7045-fe.o
+obj-$(CONFIG_DVB_USB_VP7045) += dvb-usb-vp7045.o
+
+EXTRA_CFLAGS = -Idrivers/media/dvb/dvb-core/ -Idrivers/media/dvb/frontends/
diff --git a/linux/drivers/media/dvb/dvb-usb/dvb-usb-common.h b/linux/drivers/media/dvb/dvb-usb/dvb-usb-common.h
new file mode 100644
index 000000000..b18633e6b
--- /dev/null
+++ b/linux/drivers/media/dvb/dvb-usb/dvb-usb-common.h
@@ -0,0 +1,33 @@
+#ifndef _DVB_USB_COMMON_H_
+#define _DVB_USB_COMMON_H_
+
+#define DVB_USB_LOG_PREFIX "dvb-usb"
+#include "dvb-usb.h"
+
+extern int dvb_usb_debug;
+
+#define deb_info(args...) dprintk(dvb_usb_debug,0x01,args)
+#define deb_xfer(args...) dprintk(dvb_usb_debug,0x02,args)
+#define deb_alot(args...) dprintk(dvb_usb_debug,0x04,args)
+#define deb_ts(args...)   dprintk(dvb_usb_debug,0x08,args)
+#define deb_err(args...)  dprintk(dvb_usb_debug,0x10,args)
+#define deb_rc(args...)   dprintk(dvb_usb_debug,0x20,args)
+
+/* commonly used  methods */
+extern int usb_cypress_load_firmware(struct usb_device *, const char *, int);
+
+extern int dvb_usb_urb_submit(struct dvb_usb_device *);
+extern int dvb_usb_urb_kill(struct dvb_usb_device *);
+extern int dvb_usb_urb_init(struct dvb_usb_device *);
+extern int dvb_usb_urb_exit(struct dvb_usb_device *);
+
+extern int dvb_usb_i2c_init(struct dvb_usb_device *d);
+extern int dvb_usb_i2c_exit(struct dvb_usb_device *d);
+
+extern int dvb_usb_dvb_init(struct dvb_usb_device *d);
+extern int dvb_usb_dvb_exit(struct dvb_usb_device *d);
+
+extern int dvb_usb_fe_init(struct dvb_usb_device *d);
+extern int dvb_usb_fe_exit(struct dvb_usb_device *d);
+
+#endif
diff --git a/linux/drivers/media/dvb/dvb-usb/dvb-usb-dvb.c b/linux/drivers/media/dvb/dvb-usb/dvb-usb-dvb.c
new file mode 100644
index 000000000..bec6a77d0
--- /dev/null
+++ b/linux/drivers/media/dvb/dvb-usb/dvb-usb-dvb.c
@@ -0,0 +1,191 @@
+/* This file contains functions for initializing and handling the
+ * linux-dvb API.
+ */
+#include "dvb-usb-common.h"
+
+static int dvb_usb_ctrl_feed(struct dvb_demux_feed *dvbdmxfeed, int onoff)
+{
+	struct dvb_usb_device *d = dvbdmxfeed->demux->priv;
+	int newfeedcount,ret;
+
+	if (d == NULL)
+		return -ENODEV;
+
+	newfeedcount = d->feedcount + (onoff ? 1 : -1);
+
+	/*
+	 * stop feed before setting a new pid if there will be no pid anymore
+	 */
+	if (newfeedcount == 0) {
+		deb_ts("stop feeding\n");
+
+		if (d->props.streaming_ctrl != NULL)
+			if ((ret = d->props.streaming_ctrl(d,0)))
+				err("error while stopping stream.");
+
+		dvb_usb_urb_kill(d);
+	}
+
+	d->feedcount = newfeedcount;
+
+	/* activate the pid on the device specific pid_filter */
+	deb_ts("setting pid: %5d %04x at index %d '%s'\n",dvbdmxfeed->pid,dvbdmxfeed->pid,dvbdmxfeed->index,onoff ? "on" : "off");
+	if (d->props.caps & DVB_USB_HAS_PID_FILTER &&
+		d->pid_filtering &&
+		d->props.pid_filter != NULL)
+		d->props.pid_filter(d,dvbdmxfeed->index,dvbdmxfeed->pid,onoff);
+
+	/* start the feed if this was the first feed and there is still a feed
+	 * for reception.
+	 */
+	if (d->feedcount == onoff && d->feedcount > 0) {
+
+		deb_ts("controlling pid parser\n");
+		if (d->props.caps & DVB_USB_HAS_PID_FILTER &&
+			d->props.caps & DVB_USB_PID_FILTER_CAN_BE_TURNED_OFF &&
+			d->props.pid_filter_ctrl != NULL)
+			if (d->props.pid_filter_ctrl(d,d->pid_filtering) < 0)
+				err("could not handle pid_parser");
+
+		deb_ts("start feeding\n");
+		if (d->props.streaming_ctrl != NULL)
+			if (d->props.streaming_ctrl(d,1)) {
+				err("error while enabling fifo.");
+				return -ENODEV;
+			}
+
+		dvb_usb_urb_submit(d);
+	}
+	return 0;
+}
+
+static int dvb_usb_start_feed(struct dvb_demux_feed *dvbdmxfeed)
+{
+	deb_ts("start pid: 0x%04x, feedtype: %d\n", dvbdmxfeed->pid,dvbdmxfeed->type);
+	return dvb_usb_ctrl_feed(dvbdmxfeed,1);
+}
+
+static int dvb_usb_stop_feed(struct dvb_demux_feed *dvbdmxfeed)
+{
+	deb_ts("stop pid: 0x%04x, feedtype: %d\n", dvbdmxfeed->pid, dvbdmxfeed->type);
+	return dvb_usb_ctrl_feed(dvbdmxfeed,0);
+}
+
+int dvb_usb_dvb_init(struct dvb_usb_device *d)
+{
+	int ret;
+
+	if ((ret = dvb_register_adapter(&d->dvb_adap, d->desc->name,
+			THIS_MODULE)) < 0) {
+		deb_info("dvb_register_adapter failed: error %d", ret);
+		goto err;
+	}
+	d->dvb_adap.priv = d;
+
+	d->demux.dmx.capabilities = DMX_TS_FILTERING | DMX_SECTION_FILTERING;
+	d->demux.priv = d;
+
+	/* get pidcount from demod */
+	d->demux.feednum = d->demux.filternum = 255;
+	d->demux.start_feed = dvb_usb_start_feed;
+	d->demux.stop_feed  = dvb_usb_stop_feed;
+	d->demux.write_to_decoder = NULL;
+	if ((ret = dvb_dmx_init(&d->demux)) < 0) {
+		err("dvb_dmx_init failed: error %d",ret);
+		goto err_dmx;
+	}
+
+	d->dmxdev.filternum = d->demux.filternum;
+	d->dmxdev.demux = &d->demux.dmx;
+	d->dmxdev.capabilities = 0;
+	if ((ret = dvb_dmxdev_init(&d->dmxdev, &d->dvb_adap)) < 0) {
+		err("dvb_dmxdev_init failed: error %d",ret);
+		goto err_dmx_dev;
+	}
+
+	dvb_net_init(&d->dvb_adap, &d->dvb_net, &d->demux.dmx);
+
+	goto success;
+err_dmx_dev:
+	dvb_dmx_release(&d->demux);
+err_dmx:
+	dvb_unregister_adapter(&d->dvb_adap);
+err:
+	return ret;
+success:
+	d->init_state |= DVB_USB_STATE_DVB;
+	return 0;
+}
+
+int dvb_usb_dvb_exit(struct dvb_usb_device *d)
+{
+	if (d->init_state & DVB_USB_STATE_DVB) {
+		d->init_state &= ~DVB_USB_STATE_DVB;
+		deb_info("unregistering DVB part\n");
+		dvb_net_release(&d->dvb_net);
+		d->demux.dmx.close(&d->demux.dmx);
+		dvb_dmxdev_release(&d->dmxdev);
+		dvb_dmx_release(&d->demux);
+		dvb_unregister_adapter(&d->dvb_adap);
+	}
+	return 0;
+}
+
+static int dvb_usb_fe_wakeup(struct dvb_frontend *fe)
+{
+	struct dvb_usb_device *d = fe->dvb->priv;
+
+	if (d->props.power_ctrl)
+		d->props.power_ctrl(d,1);
+
+	if (d->fe_init)
+		d->fe_init(fe);
+
+	return 0;
+}
+
+static int dvb_usb_fe_sleep(struct dvb_frontend *fe)
+{
+	struct dvb_usb_device *d = fe->dvb->priv;
+
+	if (d->props.power_ctrl)
+		d->props.power_ctrl(d,0);
+
+	if (d->fe_sleep)
+		d->fe_sleep(fe);
+
+	return 0;
+}
+
+int dvb_usb_fe_init(struct dvb_usb_device* d)
+{
+	if (d->props.frontend_attach == NULL) {
+		err("strange '%s' don't want to attach a frontend.",d->desc->name);
+		return 0;
+	}
+
+	d->props.frontend_attach(d);
+
+	/* re-assign sleep and wakeup functions */
+	if (d->fe != NULL) {
+		d->fe_init = d->fe->ops->init;   d->fe->ops->init  = dvb_usb_fe_wakeup;
+		d->fe_sleep = d->fe->ops->sleep; d->fe->ops->sleep = dvb_usb_fe_sleep;
+
+		if (dvb_register_frontend(&d->dvb_adap, d->fe)) {
+			err("Frontend registration failed.");
+			if (d->fe->ops->release)
+				d->fe->ops->release(d->fe);
+			d->fe = NULL;
+			return -ENODEV;
+		}
+	} else
+		err("no frontend was attached by '%s'",d->desc->name);
+	return 0;
+}
+
+int dvb_usb_fe_exit(struct dvb_usb_device *d)
+{
+	if (d->fe != NULL)
+		dvb_unregister_frontend(d->fe);
+	return 0;
+}
diff --git a/linux/drivers/media/dvb/dvb-usb/dvb-usb-firmware.c b/linux/drivers/media/dvb/dvb-usb/dvb-usb-firmware.c
new file mode 100644
index 000000000..a2f749b0f
--- /dev/null
+++ b/linux/drivers/media/dvb/dvb-usb/dvb-usb-firmware.c
@@ -0,0 +1,100 @@
+/*
+ * dvb-usb-firmware.c is part of the DVB USB library.
+ *
+ * Copyright (C) 2004-5 Patrick Boettcher (patrick.boettcher@desy.de)
+ *
+ * This file contains functions for downloading the firmware to Cypress FX 1 and 2 based devices.
+ *
+ * FIXME: This part does actually not belong to dvb-usb, but to the usb-subsystem.
+ *
+ * See dvb-usb-core.c for copyright information.
+ */
+#include "dvb-usb-common.h"
+
+#include <linux/firmware.h>
+#include <linux/usb.h>
+
+struct usb_cypress_controller {
+	int id;
+	const char *name;       /* name of the usb controller */
+	u16 cpu_cs_register;    /* needs to be restarted, when the firmware has been downloaded. */
+};
+
+static struct usb_cypress_controller cypress[] = {
+	{ .id = CYPRESS_AN2135, .name = "Cypress AN2135", .cpu_cs_register = 0x7f92 },
+	{ .id = CYPRESS_AN2235, .name = "Cypress AN2235", .cpu_cs_register = 0x7f92 },
+	{ .id = CYPRESS_FX2,    .name = "Cypress FX2",    .cpu_cs_register = 0xe600 },
+};
+
+/*
+ * load a firmware packet to the device
+ */
+static int usb_cypress_writemem(struct usb_device *udev,u16 addr,u8 *data, u8 len)
+{
+	return usb_control_msg(udev, usb_sndctrlpipe(udev,0),
+			0xa0, USB_TYPE_VENDOR, addr, 0x00, data, len, 5*HZ);
+}
+
+int usb_cypress_load_firmware(struct usb_device *udev, const char *filename, int type)
+{
+	const struct firmware *fw = NULL;
+	u16 addr;
+	u8 *b,*p;
+	int ret = 0,i;
+
+	if ((ret = request_firmware(&fw, filename, &udev->dev)) != 0) {
+		err("did not find the firmware file. (%s) "
+			"Please see linux/Documentation/dvb/ for more details on firmware-problems.",
+			filename);
+		return ret;
+	}
+
+	info("downloading firmware from file '%s' to the '%s'",filename,cypress[type].name);
+
+	p = kmalloc(fw->size,GFP_KERNEL);
+	if (p != NULL) {
+		u8 reset;
+		/*
+		 * you cannot use the fw->data as buffer for
+		 * usb_control_msg, a new buffer has to be
+		 * created
+		 */
+		memcpy(p,fw->data,fw->size);
+
+		/* stop the CPU */
+		reset = 1;
+		if ((ret = usb_cypress_writemem(udev,cypress[type].cpu_cs_register,&reset,1)) != 1)
+			err("could not stop the USB controller CPU.");
+		for(i = 0; p[i+3] == 0 && i < fw->size; ) {
+			b = (u8 *) &p[i];
+			addr = *((u16 *) &b[1]);
+
+			ret = usb_cypress_writemem(udev,addr,&b[4],b[0]);
+
+			if (ret != b[0]) {
+				err("error while transferring firmware "
+					"(transferred size: %d, block size: %d)",
+					ret,b[0]);
+				ret = -EINVAL;
+				break;
+			}
+			i += 5 + b[0];
+		}
+		/* length in ret */
+		if (ret > 0)
+			ret = 0;
+		/* restart the CPU */
+		reset = 0;
+		if (ret || usb_cypress_writemem(udev,cypress[type].cpu_cs_register,&reset,1) != 1) {
+			err("could not restart the USB controller CPU.");
+			ret = -EINVAL;
+		}
+
+		kfree(p);
+	} else {
+		ret = -ENOMEM;
+	}
+	release_firmware(fw);
+
+	return ret;
+}
diff --git a/linux/drivers/media/dvb/dvb-usb/dvb-usb-i2c.c b/linux/drivers/media/dvb/dvb-usb/dvb-usb-i2c.c
new file mode 100644
index 000000000..11fd89233
--- /dev/null
+++ b/linux/drivers/media/dvb/dvb-usb/dvb-usb-i2c.c
@@ -0,0 +1,36 @@
+#include "dvb-usb-common.h"
+
+int dvb_usb_i2c_init(struct dvb_usb_device *d)
+{
+	int ret = 0;
+
+	if (!(d->props.caps & DVB_USB_IS_AN_I2C_ADAPTER))
+		return 0;
+
+	strncpy(d->i2c_adap.name,d->desc->name,I2C_NAME_SIZE);
+#ifdef I2C_ADAP_CLASS_TV_DIGITAL
+	d->i2c_adap.class = I2C_ADAP_CLASS_TV_DIGITAL,
+#else
+	d->i2c_adap.class = I2C_CLASS_TV_DIGITAL,
+#endif
+	d->i2c_adap.algo      = &d->props.i2c_algo;
+	d->i2c_adap.algo_data = NULL;
+	d->i2c_adap.id      = I2C_ALGO_BIT;
+
+	i2c_set_adapdata(&d->i2c_adap, d);
+
+	if ((ret = i2c_add_adapter(&d->i2c_adap)) < 0)
+		err("could not add i2c adapter");
+
+	d->init_state |= DVB_USB_STATE_I2C;
+
+	return ret;
+}
+
+int dvb_usb_i2c_exit(struct dvb_usb_device *d)
+{
+	if (d->init_state & DVB_USB_STATE_I2C)
+		i2c_del_adapter(&d->i2c_adap);
+	d->init_state &= ~DVB_USB_STATE_I2C;
+	return 0;
+}
diff --git a/linux/drivers/media/dvb/dvb-usb/dvb-usb-init.c b/linux/drivers/media/dvb/dvb-usb/dvb-usb-init.c
new file mode 100644
index 000000000..c238aba8a
--- /dev/null
+++ b/linux/drivers/media/dvb/dvb-usb/dvb-usb-init.c
@@ -0,0 +1,177 @@
+#include "dvb-usb-common.h"
+
+/* debug */
+int dvb_usb_debug;
+module_param_named(debug,dvb_usb_debug, int, 0644);
+MODULE_PARM_DESC(debug, "set debugging level (1=info,xfer=2,alot=4,ts=8,err=16,rc=32 (or-able))." DVB_USB_DEBUG_STATUS);
+
+/* general initialization functions */
+int dvb_usb_exit(struct dvb_usb_device *d)
+{
+	deb_info("init_state before exiting everything: %x\n",d->init_state);
+//	dvb_usb_remote_exit(d);
+	dvb_usb_fe_exit(d);
+	dvb_usb_i2c_exit(d);
+	dvb_usb_dvb_exit(d);
+	dvb_usb_urb_exit(d);
+	deb_info("init_state should be zero now: %x\n",d->init_state);
+	d->init_state = DVB_USB_STATE_INIT;
+	kfree(d);
+	return 0;
+}
+
+static int dvb_usb_init(struct dvb_usb_device *d)
+{
+	int ret = 0;
+
+	sema_init(&d->usb_sem, 1);
+	sema_init(&d->i2c_sem, 1);
+
+	d->init_state = DVB_USB_STATE_INIT;
+
+/* check the capabilites and set appropriate variables */
+
+/* speed - when running at FULL speed we need a HW PID filter */
+	if (d->udev->speed == USB_SPEED_FULL && !(d->props.caps & DVB_USB_HAS_PID_FILTER)) {
+		err("This USB2.0 device cannot be run on a USB1.1 port. (it lacks a HW PID filter)");
+		return -ENODEV;
+	}
+
+
+
+	if ((ret = dvb_usb_urb_init(d)) ||
+		(ret = dvb_usb_dvb_init(d)) ||
+		(ret = dvb_usb_i2c_init(d)) ||
+		(ret = dvb_usb_fe_init(d))) {
+		dvb_usb_exit(d);
+		return ret;
+	}
+
+/*	if ((ret = dvb_usb_remote_init(d)))
+		err("could not initialize remote control.");*/
+
+	return 0;
+}
+
+/* determine the name and the state of the just found USB device */
+static struct dvb_usb_device_description * dvb_usb_find_device(struct usb_device *udev,struct dvb_usb_properties *props, int *cold)
+{
+	int i,j;
+	struct dvb_usb_device_description *desc = NULL;
+	*cold = -1;
+
+	for (i = 0; i < props->num_device_descs; i++) {
+
+		for (j = 0; j < DVB_USB_ID_MAX_NUM && props->devices[i].cold_ids[j] != NULL; j++) {
+			deb_info("check for cold %x %x\n",props->devices[i].cold_ids[j]->idVendor, props->devices[i].cold_ids[j]->idProduct);
+			if (props->devices[i].cold_ids[j]->idVendor  == le16_to_cpu(udev->descriptor.idVendor) &&
+				props->devices[i].cold_ids[j]->idProduct == le16_to_cpu(udev->descriptor.idProduct)) {
+				*cold = 1;
+				desc = &props->devices[i];
+				break;
+			}
+		}
+
+		if (desc != NULL)
+			break;
+
+		for (j = 0; j < DVB_USB_ID_MAX_NUM && props->devices[i].warm_ids[j] != NULL; j++) {
+			deb_info("check for warm %x %x\n",props->devices[i].warm_ids[j]->idVendor, props->devices[i].warm_ids[j]->idProduct);
+			if (props->devices[i].warm_ids[j]->idVendor == le16_to_cpu(udev->descriptor.idVendor) &&
+				props->devices[i].warm_ids[j]->idProduct == le16_to_cpu(udev->descriptor.idProduct)) {
+				*cold = 0;
+				desc = &props->devices[i];
+				break;
+			}
+		}
+	}
+
+/*	if (desc != NULL && props->identify_desc_quirk != NULL)
+		desc = props->identify_desc_quirk(udev,props,desc);*/
+
+	return desc;
+}
+
+/*
+ * USB
+ */
+int dvb_usb_device_init(struct usb_interface *intf, struct dvb_usb_properties *props)
+{
+	struct usb_device *udev = interface_to_usbdev(intf);
+	struct dvb_usb_device *d = NULL;
+	struct dvb_usb_device_description *desc = NULL;
+
+	int ret = -ENOMEM,cold=0;
+
+	if ((desc = dvb_usb_find_device(udev,props,&cold)) == NULL) {
+		err("something went very wrong, "
+				"unknown product ID: %.4x",le16_to_cpu(udev->descriptor.idProduct));
+		return -ENODEV;
+	}
+
+	if (cold) {
+		info("found a '%s' in cold state, will try to load a firmware",desc->name);
+		ret = usb_cypress_load_firmware(udev,props->firmware,props->usb_ctrl);
+	} else {
+		info("found a '%s' in warm state.",desc->name);
+		d = kmalloc(sizeof(struct dvb_usb_device),GFP_KERNEL);
+		if (d == NULL) {
+			err("no memory for 'struct dvb_usb_device'");
+			return ret;
+		}
+		memset(d,0,sizeof(struct dvb_usb_device));
+
+		d->udev = udev;
+		memcpy(&d->props,props,sizeof(struct dvb_usb_properties));
+		d->desc = desc;
+
+		/* store parameters to structures */
+/*		d->rc_query_interval = rc_query_interval;
+		d->pid_parse = pid_parse;
+		d->rc_key_repeat_count = rc_key_repeat_count;*/
+
+		usb_set_intfdata(intf, d);
+
+		ret = dvb_usb_init(d);
+	}
+
+	if (ret == 0)
+		info("%s successfully initialized and connected.",desc->name);
+	else
+		info("%s error while loading driver (%d)",desc->name,ret);
+	return ret;
+}
+EXPORT_SYMBOL(dvb_usb_device_init);
+
+void dvb_usb_device_exit(struct usb_interface *intf)
+{
+	struct dvb_usb_device *d = usb_get_intfdata(intf);
+	const char *name = "generic DVB-USB module";
+
+	usb_set_intfdata(intf,NULL);
+	if (d != NULL && d->desc != NULL) {
+		name = d->desc->name;
+		dvb_usb_exit(d);
+	}
+	info("%s successfully deinitialized and disconnected.",name);
+
+}
+EXPORT_SYMBOL(dvb_usb_device_exit);
+
+/* module stuff */
+static int __init dvb_usb_module_init(void)
+{
+	return 0;
+}
+
+static void __exit dvb_usb_module_exit(void)
+{
+}
+
+module_init (dvb_usb_module_init);
+module_exit (dvb_usb_module_exit);
+
+MODULE_VERSION("0.3");
+MODULE_AUTHOR("Patrick Boettcher <patrick.boettcher@desy.de>");
+MODULE_DESCRIPTION("A library module containing commonly used USB and DVB function USB DVB devices");
+MODULE_LICENSE("GPL");
diff --git a/linux/drivers/media/dvb/dvb-usb/dvb-usb-remote.c b/linux/drivers/media/dvb/dvb-usb/dvb-usb-remote.c
new file mode 100644
index 000000000..d684b50c4
--- /dev/null
+++ b/linux/drivers/media/dvb/dvb-usb/dvb-usb-remote.c
@@ -0,0 +1,321 @@
+/*
+ * dvb-usb-remote.c is part of the DVB USB library.
+ *
+ * Copyright (C) 2004-5 Patrick Boettcher (patrick.boettcher@desy.de)
+ *
+ * This file contains functions for initializing the the input-device and for handling remote-control-queries.
+ *
+ * See dvb-usb-core.c for copyright information.
+ *
+ * TODO: this part is not compiling yet, some adaptions will necessary.
+ */
+#include "dvb-usb.h"
+
+/* Table to map raw key codes to key events.  This should not be hard-wired
+   into the kernel.  */
+static const struct { u8 c0, c1, c2; uint32_t key; } nec_rc_keys [] =
+{
+	/* Key codes for the little Artec T1/Twinhan/HAMA/ remote. */
+	{ 0x00, 0xff, 0x16, KEY_POWER },
+	{ 0x00, 0xff, 0x10, KEY_MUTE },
+	{ 0x00, 0xff, 0x03, KEY_1 },
+	{ 0x00, 0xff, 0x01, KEY_2 },
+	{ 0x00, 0xff, 0x06, KEY_3 },
+	{ 0x00, 0xff, 0x09, KEY_4 },
+	{ 0x00, 0xff, 0x1d, KEY_5 },
+	{ 0x00, 0xff, 0x1f, KEY_6 },
+	{ 0x00, 0xff, 0x0d, KEY_7 },
+	{ 0x00, 0xff, 0x19, KEY_8 },
+	{ 0x00, 0xff, 0x1b, KEY_9 },
+	{ 0x00, 0xff, 0x15, KEY_0 },
+	{ 0x00, 0xff, 0x05, KEY_CHANNELUP },
+	{ 0x00, 0xff, 0x02, KEY_CHANNELDOWN },
+	{ 0x00, 0xff, 0x1e, KEY_VOLUMEUP },
+	{ 0x00, 0xff, 0x0a, KEY_VOLUMEDOWN },
+	{ 0x00, 0xff, 0x11, KEY_RECORD },
+	{ 0x00, 0xff, 0x17, KEY_FAVORITES }, /* Heart symbol - Channel list. */
+	{ 0x00, 0xff, 0x14, KEY_PLAY },
+	{ 0x00, 0xff, 0x1a, KEY_STOP },
+	{ 0x00, 0xff, 0x40, KEY_REWIND },
+	{ 0x00, 0xff, 0x12, KEY_FASTFORWARD },
+	{ 0x00, 0xff, 0x0e, KEY_PREVIOUS }, /* Recall - Previous channel. */
+	{ 0x00, 0xff, 0x4c, KEY_PAUSE },
+	{ 0x00, 0xff, 0x4d, KEY_SCREEN }, /* Full screen mode. */
+	{ 0x00, 0xff, 0x54, KEY_AUDIO }, /* MTS - Switch to secondary audio. */
+	/* additional keys TwinHan VisionPlus, the Artec appearantly not has */
+	{ 0x00, 0xff, 0x0c, KEY_CANCEL }, /* Cancel */
+	{ 0x00, 0xff, 0x1c, KEY_EPG }, /* EPG */
+	{ 0x00, 0xff, 0x00, KEY_TAB }, /* Tab */
+	{ 0x00, 0xff, 0x48, KEY_INFO }, /* Preview */
+	{ 0x00, 0xff, 0x04, KEY_LIST }, /* RecordList */
+	{ 0x00, 0xff, 0x0f, KEY_TEXT }, /* Teletext */
+	/* Key codes for the KWorld/ADSTech/JetWay remote. */
+	{ 0x86, 0x6b, 0x12, KEY_POWER },
+	{ 0x86, 0x6b, 0x0f, KEY_SELECT }, /* source */
+	{ 0x86, 0x6b, 0x0c, KEY_UNKNOWN }, /* scan */
+	{ 0x86, 0x6b, 0x0b, KEY_EPG },
+	{ 0x86, 0x6b, 0x10, KEY_MUTE },
+	{ 0x86, 0x6b, 0x01, KEY_1 },
+	{ 0x86, 0x6b, 0x02, KEY_2 },
+	{ 0x86, 0x6b, 0x03, KEY_3 },
+	{ 0x86, 0x6b, 0x04, KEY_4 },
+	{ 0x86, 0x6b, 0x05, KEY_5 },
+	{ 0x86, 0x6b, 0x06, KEY_6 },
+	{ 0x86, 0x6b, 0x07, KEY_7 },
+	{ 0x86, 0x6b, 0x08, KEY_8 },
+	{ 0x86, 0x6b, 0x09, KEY_9 },
+	{ 0x86, 0x6b, 0x0a, KEY_0 },
+	{ 0x86, 0x6b, 0x18, KEY_ZOOM },
+	{ 0x86, 0x6b, 0x1c, KEY_UNKNOWN }, /* preview */
+	{ 0x86, 0x6b, 0x13, KEY_UNKNOWN }, /* snap */
+	{ 0x86, 0x6b, 0x00, KEY_UNDO },
+	{ 0x86, 0x6b, 0x1d, KEY_RECORD },
+	{ 0x86, 0x6b, 0x0d, KEY_STOP },
+	{ 0x86, 0x6b, 0x0e, KEY_PAUSE },
+	{ 0x86, 0x6b, 0x16, KEY_PLAY },
+	{ 0x86, 0x6b, 0x11, KEY_BACK },
+	{ 0x86, 0x6b, 0x19, KEY_FORWARD },
+	{ 0x86, 0x6b, 0x14, KEY_UNKNOWN }, /* pip */
+	{ 0x86, 0x6b, 0x15, KEY_ESC },
+	{ 0x86, 0x6b, 0x1a, KEY_UP },
+	{ 0x86, 0x6b, 0x1e, KEY_DOWN },
+	{ 0x86, 0x6b, 0x1f, KEY_LEFT },
+	{ 0x86, 0x6b, 0x1b, KEY_RIGHT },
+};
+
+/* Hauppauge NOVA-T USB2 keys */
+static const struct { u16 raw; uint32_t key; } haupp_rc_keys [] = {
+	{ 0xddf, KEY_GOTO },
+	{ 0xdef, KEY_POWER },
+	{ 0xce7, KEY_TV },
+	{ 0xcc7, KEY_VIDEO },
+	{ 0xccf, KEY_AUDIO },
+	{ 0xcd7, KEY_MEDIA },
+	{ 0xcdf, KEY_EPG },
+	{ 0xca7, KEY_UP },
+	{ 0xc67, KEY_RADIO },
+	{ 0xcb7, KEY_LEFT },
+	{ 0xd2f, KEY_OK },
+	{ 0xcbf, KEY_RIGHT },
+	{ 0xcff, KEY_BACK },
+	{ 0xcaf, KEY_DOWN },
+	{ 0xc6f, KEY_MENU },
+	{ 0xc87, KEY_VOLUMEUP },
+	{ 0xc8f, KEY_VOLUMEDOWN },
+	{ 0xc97, KEY_CHANNEL },
+	{ 0xc7f, KEY_MUTE },
+	{ 0xd07, KEY_CHANNELUP },
+	{ 0xd0f, KEY_CHANNELDOWN },
+	{ 0xdbf, KEY_RECORD },
+	{ 0xdb7, KEY_STOP },
+	{ 0xd97, KEY_REWIND },
+	{ 0xdaf, KEY_PLAY },
+	{ 0xda7, KEY_FASTFORWARD },
+	{ 0xd27, KEY_LAST }, /* Skip backwards */
+	{ 0xd87, KEY_PAUSE },
+	{ 0xcf7, KEY_NEXT },
+	{ 0xc07, KEY_0 },
+	{ 0xc0f, KEY_1 },
+	{ 0xc17, KEY_2 },
+	{ 0xc1f, KEY_3 },
+	{ 0xc27, KEY_4 },
+	{ 0xc2f, KEY_5 },
+	{ 0xc37, KEY_6 },
+	{ 0xc3f, KEY_7 },
+	{ 0xc47, KEY_8 },
+	{ 0xc4f, KEY_9 },
+	{ 0xc57, KEY_KPASTERISK },
+	{ 0xc77, KEY_GRAVE }, /* # */
+	{ 0xc5f, KEY_RED },
+	{ 0xd77, KEY_GREEN },
+	{ 0xdc7, KEY_YELLOW },
+	{ 0xd4f, KEY_BLUE},
+};
+
+#define DIBUSB_RC_NEC_EMPTY             0x00
+#define DIBUSB_RC_NEC_KEY_PRESSED       0x01
+#define DIBUSB_RC_NEC_KEY_REPEATED      0x02
+static int dvb_usb_key2event_dibusb_nec(struct dvb_usb *d,u8 rb[5])
+{
+	int i;
+	switch (rb[0]) {
+		case DIBUSB_RC_NEC_KEY_PRESSED:
+			/* rb[1-3] is the actual key, rb[4] is a checksum */
+			deb_rc("raw key code 0x%02x, 0x%02x, 0x%02x, 0x%02x\n",
+				rb[1], rb[2], rb[3], rb[4]);
+
+			if ((0xff - rb[3]) != rb[4]) {
+				deb_rc("remote control checksum failed.\n");
+				break;
+			}
+
+			/* See if we can match the raw key code. */
+			for (i = 0; i < sizeof(nec_rc_keys)/sizeof(nec_rc_keys[0]); i++) {
+				if (nec_rc_keys[i].c0 == rb[1] &&
+					nec_rc_keys[i].c1 == rb[2] &&
+					nec_rc_keys[i].c2 == rb[3]) {
+
+					dib->last_event = nec_rc_keys[i].key;
+					return 1;
+				}
+			}
+			break;
+		case DIBUSB_RC_NEC_KEY_REPEATED:
+			/* rb[1]..rb[4] are always zero.*/
+			/* Repeats often seem to occur so for the moment just ignore this. */
+			return 0;
+		case DIBUSB_RC_NEC_EMPTY: /* No (more) remote control keys. */
+		default:
+			break;
+	}
+	return -1;
+}
+
+/* additional status values for Hauppauge Remote Control Protocol */
+#define HAUPPAUGE_RC_KEY_PRESSED 0x01
+#define HAUPPAUGE_RC_KEY_EMPTY   0x03
+static int dibusb_key2event_hauppauge(struct usb_dibusb *dib,u8 rb[3])
+{
+	u16 raw;
+	int i,state;
+	switch (rb[0]) {
+		case HAUPPAUGE_RC_KEY_PRESSED:
+			raw = ((rb[1] & 0x0f) << 8) | rb[2];
+
+			state = !!(rb[1] & 0x40);
+
+			deb_rc("raw key code 0x%02x, 0x%02x, 0x%02x to %04x state: %d\n",rb[1],rb[2],rb[3],raw,state);
+			for (i = 0; i < sizeof(haupp_rc_keys)/sizeof(haupp_rc_keys[0]); i++) {
+				if (haupp_rc_keys[i].raw == raw) {
+					if (dib->last_event == haupp_rc_keys[i].key &&
+						dib->last_state == state) {
+						deb_rc("key repeat\n");
+						return 0;
+					} else {
+						dib->last_event = haupp_rc_keys[i].key;
+						dib->last_state = state;
+						return 1;
+					}
+				}
+			}
+
+			break;
+		case HAUPPAUGE_RC_KEY_EMPTY:
+		default:
+			break;
+	}
+	return -1;
+}
+
+/* Read the remote control and feed the appropriate event.
+ * NEC protocol is used for remote controls
+ */
+static int dvb_usb_read_remote_control(struct usb_dibusb *dib)
+{
+	u8 b[1] = { DIBUSB_REQ_POLL_REMOTE }, rb[5];
+	int ret,event = 0;
+
+	if ((ret = dibusb_readwrite_usb(dib,b,1,rb,5)))
+		return ret;
+
+	switch (dib->dibdev->dev_cl->remote_type) {
+		case DIBUSB_RC_NEC_PROTOCOL:
+			event = dibusb_key2event_nec(dib,rb);
+			break;
+		case DIBUSB_RC_HAUPPAUGE_PROTO:
+			event = dibusb_key2event_hauppauge(dib,rb);
+		default:
+			break;
+	}
+
+	/* key repeat */
+	if (event == 0)
+		if (++dib->repeat_key_count < dib->rc_key_repeat_count) {
+			deb_rc("key repeat dropped. (%d)\n",dib->repeat_key_count);
+			event = -1; /* skip this key repeat */
+		}
+
+	if (event == 1 || event == 0) {
+		deb_rc("Translated key 0x%04x\n",event);
+
+		/* Signal down and up events for this key. */
+		input_report_key(&dib->rc_input_dev, dib->last_event, 1);
+		input_report_key(&dib->rc_input_dev, dib->last_event, 0);
+		input_sync(&dib->rc_input_dev);
+
+		if (event == 1)
+			dib->repeat_key_count = 0;
+	}
+	return 0;
+}
+
+/* Remote-control poll function - called every dib->rc_query_interval ms to see
+   whether the remote control has received anything. */
+static void dibusb_remote_query(void *data)
+{
+	struct usb_dibusb *dib = (struct usb_dibusb *) data;
+	/* TODO: need a lock here.  We can simply skip checking for the remote control
+	   if we're busy. */
+	dibusb_read_remote_control(dib);
+	schedule_delayed_work(&dib->rc_query_work,
+			      msecs_to_jiffies(dib->rc_query_interval));
+}
+
+int dibusb_remote_init(struct usb_dibusb *dib)
+{
+	int i;
+
+	if (dib->dibdev->dev_cl->remote_type == DIBUSB_RC_NO)
+		return 0;
+
+	/* Initialise the remote-control structures.*/
+	init_input_dev(&dib->rc_input_dev);
+
+	dib->rc_input_dev.evbit[0] = BIT(EV_KEY);
+	dib->rc_input_dev.keycodesize = sizeof(unsigned char);
+	dib->rc_input_dev.keycodemax = KEY_MAX;
+	dib->rc_input_dev.name = DRIVER_DESC " remote control";
+
+	switch (dib->dibdev->dev_cl->remote_type) {
+		case DIBUSB_RC_NEC_PROTOCOL:
+			for (i=0; i<sizeof(nec_rc_keys)/sizeof(nec_rc_keys[0]); i++)
+				set_bit(nec_rc_keys[i].key, dib->rc_input_dev.keybit);
+			break;
+		case DIBUSB_RC_HAUPPAUGE_PROTO:
+			for (i=0; i<sizeof(haupp_rc_keys)/sizeof(haupp_rc_keys[0]); i++)
+				set_bit(haupp_rc_keys[i].key, dib->rc_input_dev.keybit);
+			break;
+		default:
+			break;
+	}
+
+
+	input_register_device(&dib->rc_input_dev);
+
+	INIT_WORK(&dib->rc_query_work, dibusb_remote_query, dib);
+
+	/* Start the remote-control polling. */
+	if (dib->rc_query_interval < 40)
+		dib->rc_query_interval = 100; /* default */
+
+	info("schedule remote query interval to %d msecs.",dib->rc_query_interval);
+	schedule_delayed_work(&dib->rc_query_work,msecs_to_jiffies(dib->rc_query_interval));
+
+	dib->init_state |= DIBUSB_STATE_REMOTE;
+
+	return 0;
+}
+
+int dibusb_remote_exit(struct usb_dibusb *dib)
+{
+	if (dib->dibdev->dev_cl->remote_type == DIBUSB_RC_NO)
+		return 0;
+
+	if (dib->init_state & DIBUSB_STATE_REMOTE) {
+		cancel_delayed_work(&dib->rc_query_work);
+		flush_scheduled_work();
+		input_unregister_device(&dib->rc_input_dev);
+	}
+	dib->init_state &= ~DIBUSB_STATE_REMOTE;
+	return 0;
+}
diff --git a/linux/drivers/media/dvb/dvb-usb/dvb-usb-urb.c b/linux/drivers/media/dvb/dvb-usb/dvb-usb-urb.c
new file mode 100644
index 000000000..a593b5779
--- /dev/null
+++ b/linux/drivers/media/dvb/dvb-usb/dvb-usb-urb.c
@@ -0,0 +1,155 @@
+/*
+ * This file contains functions for initializing and handling the
+ * USB and URB stuff.
+ */
+#include "dvb-usb-common.h"
+
+#include <linux/pci.h>
+
+static void dvb_usb_bulk_urb_complete(struct urb *urb, struct pt_regs *ptregs)
+{
+	struct dvb_usb_device *d = urb->context;
+
+	deb_ts("bulk urb completed. feedcount: %d, status: %d, length: %d\n",d->feedcount,urb->status,
+			urb->actual_length);
+
+	switch (urb->status) {
+		case 0:         /* success */
+		case -ETIMEDOUT:    /* NAK */
+			break;
+		case -ECONNRESET:   /* kill */
+		case -ENOENT:
+		case -ESHUTDOWN:
+			return;
+		default:        /* error */
+			deb_ts("urb completition error %d.", urb->status);
+			break;
+	}
+
+	if (d->feedcount > 0 && urb->actual_length > 0) {
+		if (d->init_state & DVB_USB_STATE_DVB)
+			dvb_dmx_swfilter(&d->demux, (u8*) urb->transfer_buffer,urb->actual_length);
+	} else
+		deb_ts("URB dropped because of feedcount.\n");
+
+	usb_submit_urb(urb,GFP_ATOMIC);
+}
+
+int dvb_usb_urb_kill(struct dvb_usb_device *d)
+{
+	int i;
+	for (i = 0; i < d->urbs_submitted; i++) {
+		deb_info("killing URB no. %d.\n",i);
+
+		/* stop the URB */
+		usb_kill_urb(d->urb_list[i]);
+	}
+	d->urbs_submitted = 0;
+	return 0;
+}
+
+int dvb_usb_urb_submit(struct dvb_usb_device *d)
+{
+	int i,ret;
+	for (i = 0; i < d->urbs_initialized; i++) {
+		deb_info("submitting URB no. %d\n",i);
+		if ((ret = usb_submit_urb(d->urb_list[i],GFP_ATOMIC))) {
+			err("could not submit URB no. %d - get them all back\n",i);
+			dvb_usb_urb_kill(d);
+			return ret;
+		}
+		d->urbs_submitted++;
+	}
+	return 0;
+}
+
+static int dvb_usb_bulk_urb_init(struct dvb_usb_device *d)
+{
+	int i,bufsize = d->props.urb.count * d->props.urb.u.bulk.buffersize;
+
+	deb_info("allocate %d bytes as buffersize for all URBs\n",bufsize);
+	/* allocate the actual buffer for the URBs */
+	if ((d->buffer = pci_alloc_consistent(NULL,bufsize,&d->dma_handle)) == NULL) {
+		deb_info("not enough memory for urb-buffer allocation.\n");
+		return -ENOMEM;
+	}
+	deb_info("allocation successful\n");
+	memset(d->buffer,0,bufsize);
+
+	d->init_state |= DVB_USB_STATE_URB_BUF;
+
+	/* allocate the URBs */
+	for (i = 0; i < d->props.urb.count; i++) {
+		if (!(d->urb_list[i] = usb_alloc_urb(0,GFP_ATOMIC))) {
+			return -ENOMEM;
+		}
+
+		usb_fill_bulk_urb( d->urb_list[i], d->udev,
+				usb_rcvbulkpipe(d->udev,d->props.urb.endpoint),
+				&d->buffer[i*d->props.urb.u.bulk.buffersize],
+				d->props.urb.u.bulk.buffersize,
+				dvb_usb_bulk_urb_complete, d);
+
+		d->urb_list[i]->transfer_flags = 0;
+		d->urbs_initialized++;
+	}
+	return 0;
+}
+
+int dvb_usb_urb_init(struct dvb_usb_device *d)
+{
+	/*
+	 * when reloading the driver w/o replugging the device
+	 * a timeout occures, this helps
+	 */
+//	usb_clear_halt(dib->udev,usb_sndbulkpipe(dib->udev,dib->dibdev->dev_cl->pipe_cmd));
+//	usb_clear_halt(dib->udev,usb_rcvbulkpipe(dib->udev,dib->dibdev->dev_cl->pipe_cmd));
+//	usb_clear_halt(dib->udev,usb_rcvbulkpipe(dib->udev,dib->dibdev->dev_cl->pipe_data));
+
+	/* allocate the array for the data transfer URBs */
+	d->urb_list = kmalloc(d->props.urb.count * sizeof(struct urb *),GFP_KERNEL);
+	if (d->urb_list == NULL)
+		return -ENOMEM;
+	memset(d->urb_list,0,d->props.urb.count * sizeof(struct urb *));
+	d->init_state |= DVB_USB_STATE_URB_LIST;
+
+	switch (d->props.urb.type) {
+		case DVB_USB_BULK:
+			return dvb_usb_bulk_urb_init(d);
+		case DVB_USB_ISOC:
+			err("isochronous transfer not yet implemented in dvb-usb.");
+			return -EINVAL;
+		default:
+			err("unkown URB-type for data transfer.");
+			return -EINVAL;
+	}
+}
+
+int dvb_usb_urb_exit(struct dvb_usb_device *d)
+{
+	int i;
+
+	dvb_usb_urb_kill(d);
+
+	if (d->init_state & DVB_USB_STATE_URB_LIST) {
+		for (i = 0; i < d->urbs_initialized; i++) {
+			if (d->urb_list[i] != NULL) {
+				deb_info("freeing URB no. %d.\n",i);
+				/* free the URBs */
+				usb_free_urb(d->urb_list[i]);
+			}
+		}
+		d->urbs_initialized = 0;
+		/* free the urb array */
+		kfree(d->urb_list);
+		d->init_state &= ~DVB_USB_STATE_URB_LIST;
+	}
+
+	if (d->init_state & DVB_USB_STATE_URB_BUF)
+		pci_free_consistent(NULL,
+			d->props.urb.u.bulk.buffersize * d->props.urb.count,
+			d->buffer,d->dma_handle);
+
+	d->init_state &= ~DVB_USB_STATE_URB_BUF;
+	return 0;
+}
diff --git a/linux/drivers/media/dvb/dvb-usb/dvb-usb.h b/linux/drivers/media/dvb/dvb-usb/dvb-usb.h
new file mode 100644
index 000000000..24aa7d077
--- /dev/null
+++ b/linux/drivers/media/dvb/dvb-usb/dvb-usb.h
@@ -0,0 +1,182 @@
+/*
+ * dvb-usb.h
+ *
+ * Copyright (C) 2004-5 Patrick Boettcher (patrick.boettcher@desy.de)
+ *
+ *	This program is free software; you can redistribute it and/or
+ *	modify it under the terms of the GNU General Public License as
+ *	published by the Free Software Foundation, version 2.
+ */
+#ifndef __DVB_USB_H__
+#define __DVB_USB_H__
+
+#include <linux/config.h>
+#include <linux/input.h>
+#include <linux/usb.h>
+
+#include "dvb_frontend.h"
+#include "dvb_demux.h"
+#include "dvb_net.h"
+#include "dmxdev.h"
+
+/* debug */
+#ifdef CONFIG_DVB_USB_DEBUG
+#define dprintk(var,level,args...) \
+	    do { if ((var & level)) { printk(args); } } while (0)
+
+#define debug_dump(b,l,func) {\
+	int i; \
+	for (i = 0; i < l; i++) func("%02x ", b[i]); \
+	func("\n");\
+}
+#define DVB_USB_DEBUG_STATUS
+#else
+#define dprintk(args...)
+#define debug_dump(b,l)
+
+#define DVB_USB_DEBUG_STATUS " (debugging is not enabled)"
+
+#endif
+
+/* generic log methods - taken from usb.h */
+#ifndef DVB_USB_LOG_PREFIX
+ #define DVB_USB_LOG_PREFIX "dvb-usb (please define a log prefix)"
+#endif
+
+#undef err
+#define err(format, arg...)  printk(KERN_ERR     DVB_USB_LOG_PREFIX ": " format "\n" , ## arg)
+#undef info
+#define info(format, arg...) printk(KERN_INFO    DVB_USB_LOG_PREFIX ": " format "\n" , ## arg)
+#undef warn
+#define warn(format, arg...) printk(KERN_WARNING DVB_USB_LOG_PREFIX ": " format "\n" , ## arg)
+
+struct dvb_usb_device_description {
+	const char *name;                                   /* real name of the box */
+
+#define DVB_USB_ID_MAX_NUM 15
+	struct usb_device_id *cold_ids[DVB_USB_ID_MAX_NUM]; /* list of USB ids when this device is at pre firmware state */
+	struct usb_device_id *warm_ids[DVB_USB_ID_MAX_NUM]; /* list of USB ids when this device is at post firmware state */
+};
+
+struct dvb_usb_device;
+
+/* properties of an dvb-usb-device */
+struct dvb_usb_properties {
+
+#define DVB_USB_HAS_PID_FILTER               0x01
+#define DVB_USB_PID_FILTER_CAN_BE_TURNED_OFF 0x02
+#define DVB_USB_IS_AN_I2C_ADAPTER            0x04
+	int caps;
+
+#define CYPRESS_AN2135  0
+#define CYPRESS_AN2235  1
+#define CYPRESS_FX2     2
+	int usb_ctrl;                                            /* usb controller */
+	const char *firmware;                                    /* valid firmware filenames */
+
+	int (*streaming_ctrl) (struct dvb_usb_device *, int); /* control the MPEG2-TS streaming of the device */
+	int (*pid_filter) (struct dvb_usb_device *, int, u16, int); /* if the device has a hardware pid filter */
+	int (*pid_filter_ctrl) (struct dvb_usb_device *, int); /* if the device has a hardware pid filter to en-/disable */
+
+	int (*power_ctrl) (struct dvb_usb_device *, int);    /* power control callback of the device */
+
+	int (*frontend_attach) (struct dvb_usb_device *);        /* each device has to know about its frontends */
+
+	struct dvb_usb_device_description * (*identify_desc_quirk) (void); /* the device is not distinuishable just by its USB IDs */
+
+#define USB_REMOTE_PROTO_NO         1
+#define USB_REMOTE_PROTO_NEC        2
+#define USB_REMOTE_PROTO_HAUPPAUGE  3
+	int remote_protocol;                   /* does this device have an ir-receiver */
+	int rc_interval;
+
+#define REMOTE_KEY_NO      0x01
+#define REMOTE_KEY_REPEAT  0x02
+#define REMOTE_KEY_PRESSED 0x03
+	int (*query_rc) (struct dvb_usb_device *, u8 *, int *);  /* remote query callback */
+
+/* i2c algorithm, if any */
+	struct i2c_algorithm i2c_algo;
+
+/* MPEG2 TS transfer description */
+	struct {
+#define DVB_USB_BULK  1
+#define DVB_USB_ISOC  2
+		int type;
+		int count;
+		int endpoint;
+
+		union {
+			struct {
+				int buffersize; /* per URB */
+			} bulk;
+			struct {
+				int framesperurb;
+				int framesize;
+			} isoc;
+		} u;
+
+	} urb;
+
+	int num_device_descs;
+	struct dvb_usb_device_description devices[];
+};
+
+struct dvb_usb_device {
+	struct dvb_usb_properties props;
+	struct dvb_usb_device_description *desc;
+
+#define DVB_USB_STATE_INIT        0x000
+#define DVB_USB_STATE_URB_LIST    0x001
+#define DVB_USB_STATE_URB_BUF     0x002
+#define DVB_USB_STATE_DVB         0x004
+#define DVB_USB_STATE_I2C         0x008
+#define DVB_USB_STATE_REMOTE      0x010
+#define DVB_USB_STATE_URB_SUBMIT  0x020
+	int init_state;
+
+	/* usb */
+	struct usb_device *udev;
+	struct urb **urb_list;
+	u8 *buffer;
+	dma_addr_t dma_handle;
+	int urbs_initialized;
+	int urbs_submitted;
+
+	int feedcount;
+
+	/* locking */
+	struct semaphore usb_sem;
+
+	/* i2c */
+	struct semaphore i2c_sem;
+	struct i2c_adapter i2c_adap;
+
+	/* dvb */
+	struct dvb_adapter dvb_adap;
+	struct dmxdev dmxdev;
+	struct dvb_demux demux;
+	struct dvb_net dvb_net;
+	struct dvb_frontend* fe;
+
+	int (*fe_sleep) (struct dvb_frontend *);
+	int (*fe_init)  (struct dvb_frontend *);
+
+	/* remote control */
+//	struct input_dev rc_input_dev;
+//	struct work_struct rc_query_work;
+//	int last_event;
+//	int last_state; /* for Hauppauge RC protocol */
+//	int repeat_key_count;
+//	int rc_key_repeat_count; /* module parameter */
+
+	int pid_filtering;
+//	int rc_query_interval;
+
+	void *priv;
+};
+
+int dvb_usb_device_init(struct usb_interface *, struct dvb_usb_properties *);
+void dvb_usb_device_exit(struct usb_interface *);
+
+#endif
diff --git a/linux/drivers/media/dvb/dvb-usb/vp7045-fe.c b/linux/drivers/media/dvb/dvb-usb/vp7045-fe.c
new file mode 100644
index 000000000..84994fa09
--- /dev/null
+++ b/linux/drivers/media/dvb/dvb-usb/vp7045-fe.c
@@ -0,0 +1,182 @@
+#include "vp7045.h"
+
+/* It is a Zarlink MT352 within a Samsung Tuner (DNOS404ZH102A) - 040929 - AAT
+ *
+ * Programming is hidden inside the firmware, so set_frontend is very easy.
+ * Even though there is a Firmware command that one can use to access the demod
+ * via its registers. This is used for status information.
+ */
+
+struct vp7045_fe_state {
+	struct dvb_frontend fe;
+	struct dvb_usb_device *d;
+};
+
+
+static int vp7045_fe_read_status(struct dvb_frontend* fe, fe_status_t *status)
+{
+	struct vp7045_fe_state *state = fe->demodulator_priv;
+	u8 s0 = vp7045_read_reg(state->d,0x00),
+	   s1 = vp7045_read_reg(state->d,0x01),
+	   s3 = vp7045_read_reg(state->d,0x03);
+
+	*status = 0;
+	if (s0 & (1 << 4))
+		*status |= FE_HAS_CARRIER;
+	if (s0 & (1 << 1))
+		*status |= FE_HAS_VITERBI;
+	if (s0 & (1 << 5))
+		*status |= FE_HAS_LOCK;
+	if (s1 & (1 << 1))
+		*status |= FE_HAS_SYNC;
+	if (s3 & (1 << 6))
+		*status |= FE_HAS_SIGNAL;
+
+	if ((*status & (FE_HAS_CARRIER | FE_HAS_VITERBI | FE_HAS_SYNC)) !=
+			(FE_HAS_CARRIER | FE_HAS_VITERBI | FE_HAS_SYNC))
+		*status &= ~FE_HAS_LOCK;
+
+	return 0;
+}
+
+static int vp7045_fe_read_ber(struct dvb_frontend* fe, u32 *ber)
+{
+	struct vp7045_fe_state *state = fe->demodulator_priv;
+	*ber = (vp7045_read_reg(state->d, 0x0D) << 16) |
+	       (vp7045_read_reg(state->d, 0x0E) << 8) |
+	        vp7045_read_reg(state->d, 0x0F);
+	return 0;
+}
+
+static int vp7045_fe_read_unc_blocks(struct dvb_frontend* fe, u32 *unc)
+{
+	struct vp7045_fe_state *state = fe->demodulator_priv;
+	*unc = (vp7045_read_reg(state->d, 0x10) << 8) |
+		    vp7045_read_reg(state->d, 0x11);
+	return 0;
+}
+
+static int vp7045_fe_read_signal_strength(struct dvb_frontend* fe, u16 *strength)
+{
+	struct vp7045_fe_state *state = fe->demodulator_priv;
+	u16 signal = (vp7045_read_reg(state->d, 0x14) << 8) |
+		vp7045_read_reg(state->d, 0x15);
+
+	*strength = ~signal;
+	return 0;
+}
+
+static int vp7045_fe_read_snr(struct dvb_frontend* fe, u16 *snr)
+{
+	struct vp7045_fe_state *state = fe->demodulator_priv;
+	u8 _snr = vp7045_read_reg(state->d, 0x09);
+	*snr = (_snr << 8) | _snr;
+	return 0;
+}
+
+static int vp7045_fe_init(struct dvb_frontend* fe)
+{
+	return 0;
+}
+
+static int vp7045_fe_sleep(struct dvb_frontend* fe)
+{
+	return 0;
+}
+
+static int vp7045_fe_get_tune_settings(struct dvb_frontend* fe, struct dvb_frontend_tune_settings *tune)
+{
+	tune->min_delay_ms = 800;
+	return 0;
+}
+
+static int vp7045_fe_set_frontend(struct dvb_frontend* fe,
+				  struct dvb_frontend_parameters *fep)
+{
+	struct vp7045_fe_state *state = fe->demodulator_priv;
+	u8 buf[5];
+	u32 freq = fep->frequency / 1000;
+
+	buf[0] = (freq >> 16) & 0xff;
+	buf[1] = (freq >>  8) & 0xff;
+	buf[2] =  freq        & 0xff;
+	buf[3] = 0;
+
+	switch (fep->u.ofdm.bandwidth) {
+		case BANDWIDTH_8_MHZ: buf[4] = 8; break;
+		case BANDWIDTH_7_MHZ: buf[4] = 7; break;
+		case BANDWIDTH_6_MHZ: buf[4] = 6; break;
+		case BANDWIDTH_AUTO: return -EOPNOTSUPP;
+		default:
+			return -EINVAL;
+	}
+
+	vp7045_usb_op(state->d,LOCK_TUNER_COMMAND,buf,5,NULL,0,200);
+	return 0;
+}
+
+static int vp7045_fe_get_frontend(struct dvb_frontend* fe,
+				  struct dvb_frontend_parameters *fep)
+{
+	return 0;
+}
+
+static void vp7045_fe_release(struct dvb_frontend* fe)
+{
+	struct vp7045_fe_state *state = fe->demodulator_priv;
+	kfree(state);
+}
+
+static struct dvb_frontend_ops vp7045_fe_ops;
+
+struct dvb_frontend * vp7045_fe_attach(struct dvb_usb_device *d)
+{
+	struct vp7045_fe_state *s = kmalloc(sizeof(struct vp7045_fe_state), GFP_KERNEL);
+	if (s == NULL)
+		goto error;
+	memset(s,0,sizeof(struct vp7045_fe_state));
+
+	s->d = d;
+	s->fe.ops = &vp7045_fe_ops;
+	s->fe.demodulator_priv = s;
+
+	goto success;
+error:
+	return NULL;
+success:
+	return &s->fe;
+}
+
+
+static struct dvb_frontend_ops vp7045_fe_ops = {
+	.info = {
+		.name			= "Twinhan VP7045/46 USB DVB-T",
+		.type			= FE_OFDM,
+		.frequency_min		= 44250000,
+		.frequency_max		= 867250000,
+		.frequency_stepsize	= 1000,
+		.caps = FE_CAN_INVERSION_AUTO |
+				FE_CAN_FEC_1_2 | FE_CAN_FEC_2_3 | FE_CAN_FEC_3_4 |
+				FE_CAN_FEC_5_6 | FE_CAN_FEC_7_8 | FE_CAN_FEC_AUTO |
+				FE_CAN_QPSK | FE_CAN_QAM_16 | FE_CAN_QAM_64 | FE_CAN_QAM_AUTO |
+				FE_CAN_TRANSMISSION_MODE_AUTO |
+				FE_CAN_GUARD_INTERVAL_AUTO |
+				FE_CAN_RECOVER |
+				FE_CAN_HIERARCHY_AUTO,
+	},
+
+	.release = vp7045_fe_release,
+
+	.init = vp7045_fe_init,
+	.sleep = vp7045_fe_sleep,
+
+	.set_frontend = vp7045_fe_set_frontend,
+	.get_frontend = vp7045_fe_get_frontend,
+	.get_tune_settings = vp7045_fe_get_tune_settings,
+
+	.read_status = vp7045_fe_read_status,
+	.read_ber = vp7045_fe_read_ber,
+	.read_signal_strength = vp7045_fe_read_signal_strength,
+	.read_snr = vp7045_fe_read_snr,
+	.read_ucblocks = vp7045_fe_read_unc_blocks,
+};
diff --git a/linux/drivers/media/dvb/dvb-usb/vp7045.c b/linux/drivers/media/dvb/dvb-usb/vp7045.c
new file mode 100644
index 000000000..97a95d513
--- /dev/null
+++ b/linux/drivers/media/dvb/dvb-usb/vp7045.c
@@ -0,0 +1,193 @@
+#include "vp7045.h"
+
+/* debug */
+int dvb_usb_vp7045_debug;
+module_param_named(debug,dvb_usb_vp7045_debug, int, 0644);
+MODULE_PARM_DESC(debug, "set debugging level (1=info,xfer=2 (or-able))." DVB_USB_DEBUG_STATUS);
+
+int vp7045_usb_op(struct dvb_usb_device *d, u8 cmd, u8 *out, int outlen, u8 *in, int inlen, int msec)
+{
+	int ret = 0;
+	u8 inbuf[12] = { 0 }, outbuf[20] = { 0 };
+
+	outbuf[0] = cmd;
+
+	if (outlen > 19)
+		outlen = 19;
+
+	if (inlen > 11)
+		inlen = 11;
+
+	if (out != NULL && outlen > 0)
+		memcpy(&outbuf[1], out, outlen);
+
+	deb_xfer("out buffer: ");
+	debug_dump(outbuf,outlen+1,deb_xfer);
+
+	if ((ret = down_interruptible(&d->usb_sem)))
+		return ret;
+
+	if (usb_control_msg(d->udev,
+			usb_sndctrlpipe(d->udev,0),
+			TH_COMMAND_OUT, USB_TYPE_VENDOR | USB_DIR_OUT, 0, 0,
+			outbuf, 20, 2*HZ) != 20) {
+		err("USB control message 'out' went wrong.");
+		ret = -EIO;
+		goto unlock;
+	}
+
+	msleep(msec);
+
+	if (usb_control_msg(d->udev,
+			usb_rcvctrlpipe(d->udev,0),
+			TH_COMMAND_IN, USB_TYPE_VENDOR | USB_DIR_IN, 0, 0,
+			inbuf, 12, 2*HZ) != 12) {
+		err("USB control message 'in' went wrong.");
+		ret = -EIO;
+		goto unlock;
+	}
+
+	deb_xfer("in buffer: ");
+	debug_dump(inbuf,12,deb_xfer);
+
+	if (in != NULL && inlen > 0)
+		memcpy(in,&inbuf[1],inlen);
+
+unlock:
+	up(&d->usb_sem);
+
+	return ret;
+}
+
+u8 vp7045_read_reg(struct dvb_usb_device *d, u8 reg)
+{
+	u8 obuf[2] = { 0 },v;
+	obuf[1] = reg;
+
+	vp7045_usb_op(d,TUNER_REG_READ,obuf,2,&v,1,30);
+
+	return v;
+}
+
+static int vp7045_power_ctrl(struct dvb_usb_device *d, int onoff)
+{
+	u8 v = onoff;
+	deb_info("power control: %s\n",onoff ? "on" : "off");
+
+	return vp7045_usb_op(d,SET_TUNER_POWER,&v,1,NULL,0,150);
+}
+
+static int vp7045_rc_query(struct dvb_usb_device *d, u8 *key_buf, int *state)
+{
+	deb_info("remote query\n");
+	*state = REMOTE_KEY_NO;
+	return 0; //vp7045_usb_op(d,RC_VAL_READ,&v,1,NULL,0,20);
+}
+
+static int vp7045_frontend_attach(struct dvb_usb_device *d)
+{
+	u8 buf[20];
+
+	vp7045_usb_op(d,VENDOR_STRING_READ,NULL,0,buf,20,0);
+	buf[10] = '\0';
+	deb_info("firmware says: %s ",buf);
+
+	vp7045_usb_op(d,PRODUCT_STRING_READ,NULL,0,buf,20,0);
+	buf[10] = '\0';
+	deb_info("%s ",buf);
+
+	vp7045_usb_op(d,FW_VERSION_READ,NULL,0,buf,20,0);
+	buf[10] = '\0';
+	deb_info("v%s\n",buf);
+
+	d->fe = vp7045_fe_attach(d);
+
+	return 0;
+}
+
+static struct dvb_usb_properties vp7045_properties;
+
+static int vp7045_usb_probe(struct usb_interface *intf,
+		const struct usb_device_id *id)
+{
+	return dvb_usb_device_init(intf,&vp7045_properties);
+}
+
+static struct usb_device_id vp7045_usb_table [] = {
+	    { USB_DEVICE(0x13d3, 0x3205) },
+	    { USB_DEVICE(0x13d3, 0x3206) },
+	    { 0 },
+};
+
+static struct dvb_usb_properties vp7045_properties = {
+	.caps = 0,
+
+	.usb_ctrl = CYPRESS_FX2,
+	.firmware = "dvb-usb-vp7045-01.fw",
+
+	.streaming_ctrl  = NULL,
+	.pid_filter      = NULL,
+	.pid_filter_ctrl = NULL,
+	.power_ctrl      = vp7045_power_ctrl,
+	.frontend_attach = vp7045_frontend_attach,
+
+	.rc_interval     = 400,
+	.remote_protocol = USB_REMOTE_PROTO_NEC,
+	.query_rc        = vp7045_rc_query,
+
+	/* parameter for the MPEG2-data transfer */
+	.urb = {
+		.type = DVB_USB_BULK,
+		.count = 7,
+		.endpoint = 0x02,
+		.u {
+			.bulk = {
+				.buffersize = 4096,
+			}
+		}
+	},
+
+	.num_device_descs = 1,
+	.devices = {
+		{ .name = "Twinhan USB2.0 DVB-T receiver (TwinhanDTV Alpha/MagicBox II)",
+		  .cold_ids = { &vp7045_usb_table[0], NULL },
+		  .warm_ids = { &vp7045_usb_table[1], NULL },
+		},
+		{ 0 },
+	}
+};
+
+/* usb specific object needed to register this driver with the usb subsystem */
+static struct usb_driver vp7045_usb_driver = {
+	.owner		= THIS_MODULE,
+	.name		= "Twinhan DVB-T USB2.0",
+	.probe 		= vp7045_usb_probe,
+	.disconnect = dvb_usb_device_exit,
+	.id_table 	= vp7045_usb_table,
+};
+
+/* module stuff */
+static int __init vp7045_usb_module_init(void)
+{
+	int result;
+	if ((result = usb_register(&vp7045_usb_driver))) {
+		err("usb_register failed. (%d)",result);
+		return result;
+	}
+
+	return 0;
+}
+
+static void __exit vp7045_usb_module_exit(void)
+{
+	/* deregister this driver from the USB subsystem */
+	usb_deregister(&vp7045_usb_driver);
+}
+
+module_init(vp7045_usb_module_init);
+module_exit(vp7045_usb_module_exit);
+
+MODULE_AUTHOR("Patrick Boettcher <patrick.boettcher@desy.de>");
+MODULE_DESCRIPTION("Twinhan MagicBox/Alpha DVB-T USB2.0");
+MODULE_VERSION("0.1");
+MODULE_LICENSE("GPL");
diff --git a/linux/drivers/media/dvb/dvb-usb/vp7045.h b/linux/drivers/media/dvb/dvb-usb/vp7045.h
new file mode 100644
index 000000000..92234580e
--- /dev/null
+++ b/linux/drivers/media/dvb/dvb-usb/vp7045.h
@@ -0,0 +1,53 @@
+#ifndef _DVB_USB_VP7045_H_
+#define _DVB_USB_VP7045_H_
+
+#define DVB_USB_LOG_PREFIX "vp7045"
+#include "dvb-usb.h"
+
+extern int dvb_vp7045_debug;
+#define deb_info(args...) dprintk(dvb_usb_vp7045_debug,0x01,args)
+#define deb_xfer(args...) dprintk(dvb_usb_vp7045_debug,0x02,args)
+
+/* vp7045 commands */
+
+/* Twinhan Vendor requests */
+#define TH_COMMAND_IN                     0xC0
+#define TH_COMMAND_OUT                    0xC1
+
+/* TH_COMMAND_OUT request type */
+#define TUNER_REG_READ                    0x03
+#define TUNER_REG_WRITE                   0x04
+#define RC_VAL_READ                       0x05
+#define SET_TUNER_POWER                   0x06
+#define GET_USB_SPEED                     0x07
+#define LOCK_TUNER_COMMAND                0x09
+#define TUNER_SIGNAL_READ                 0x0A
+#define FW_VERSION_READ                   0x0B
+#define VENDOR_STRING_READ                0x0C
+#define PRODUCT_STRING_READ               0x0D
+#define SET_EE_VALUE                      0x10
+#define GET_EE_VALUE                      0x11
+#define CHECK_TUNER_POWER                 0x12
+#define RESET_FX2                         0x13
+#define FW_BCD_VERSION_READ               0x14
+
+#define Tuner_Power_ON                    1
+#define Tuner_Power_OFF                   0
+
+#define Tuner_Lock                        1
+#define Tuner_UnLock                      0
+
+#define USB_SPEED_LOW                     0
+#define USB_SPEED_FULL                    1
+#define USB_SPEED_HIGH                    2
+
+#define TUNER_REG_QUALITY_2               0x0A
+#define TUNER_REG_QUALITY_1               0x0B
+#define TUNER_REG_QUALITY_0               0x0C
+#define TUNER_REG_STRENGTH                0x09
+
+extern struct dvb_frontend * vp7045_fe_attach(struct dvb_usb_device *d);
+extern int vp7045_usb_op(struct dvb_usb_device *d, u8 cmd, u8 *out, int outlen, u8 *in, int inlen,int msec);
+extern u8 vp7045_read_reg(struct dvb_usb_device *d, u8 reg);
+
+#endif