merge...

From: Jean-Francois Moine <moinejf@free.fr>

Signed-off-by: Jean-Francois Moine <moinejf@free.fr>

17 files changed, 161 insertions, 796 deletions

diff --git a/linux/Documentation/video4linux/cx18.txt b/linux/Documentation/video4linux/cx18.txt
index 6842c2628..914cb7e73 100644
--- a/linux/Documentation/video4linux/cx18.txt
+++ b/linux/Documentation/video4linux/cx18.txt
@@ -1,36 +1,30 @@
 Some notes regarding the cx18 driver for the Conexant CX23418 MPEG
 encoder chip:
 
-1) The only hardware currently supported is the Hauppauge HVR-1600
-   card and the Compro VideoMate H900 (note that this card only
-   supports analog input, it has no digital tuner!).
+1) Currently supported are:
 
-2) Some people have problems getting the i2c bus to work. Cause unknown.
-   The symptom is that the eeprom cannot be read and the card is
-   unusable.
+	- Hauppauge HVR-1600
+	- Compro VideoMate H900
+	- Yuan MPC718
+	- Conexant Raptor PAL/SECAM devkit
 
-3) The audio from the analog tuner is mono only. Probably caused by
-   incorrect audio register information in the datasheet. We are
-   waiting for updated information from Conexant.
+2) Some people have problems getting the i2c bus to work.
+   The symptom is that the eeprom cannot be read and the card is
+   unusable. This is probably fixed, but if you have problems
+   then post to the video4linux or ivtv-users mailinglist.
 
-4) VBI (raw or sliced) has not yet been implemented.
+3) VBI (raw or sliced) has not yet been implemented.
 
-5) MPEG indexing is not yet implemented.
+4) MPEG indexing is not yet implemented.
 
-6) The driver is still a bit rough around the edges, this should
+5) The driver is still a bit rough around the edges, this should
    improve over time.
 
 
 Firmware:
 
-The firmware needs to be extracted from the Windows Hauppauge HVR-1600
-driver, available here:
-
-http://hauppauge.lightpath.net/software/install_cd/hauppauge_cd_3.4d1.zip
+You can obtain the firmware files here:
 
-Unzip, then copy the following files to the firmware directory
-and rename them as follows:
+http://dl.ivtvdriver.org/ivtv/firmware/cx18-firmware.tar.gz
 
-Drivers/Driver18/hcw18apu.rom -> v4l-cx23418-apu.fw
-Drivers/Driver18/hcw18enc.rom -> v4l-cx23418-cpu.fw
-Drivers/Driver18/hcw18mlC.rom -> v4l-cx23418-dig.fw
+Untar and copy the .fw files to your firmware directory.
diff --git a/linux/drivers/media/video/cx18/cx18-audio.c b/linux/drivers/media/video/cx18/cx18-audio.c
index 1adc404d9..6d5b94fc7 100644
--- a/linux/drivers/media/video/cx18/cx18-audio.c
+++ b/linux/drivers/media/video/cx18/cx18-audio.c
@@ -26,13 +26,17 @@
 #include "cx18-cards.h"
 #include "cx18-audio.h"
 
+#define CX18_AUDIO_ENABLE 0xc72014
+
 /* Selects the audio input and output according to the current
    settings. */
 int cx18_audio_set_io(struct cx18 *cx)
 {
 	struct v4l2_routing route;
 	u32 audio_input;
+	u32 val;
 	int mux_input;
+	int err;
 
 	/* Determine which input to use */
 	if (test_bit(CX18_F_I_RADIO_USER, &cx->i_flags)) {
@@ -51,8 +55,17 @@ int cx18_audio_set_io(struct cx18 *cx)
 	cx18_i2c_hw(cx, cx->card->hw_muxer, VIDIOC_INT_S_AUDIO_ROUTING, &route);
 
 	route.input = audio_input;
-	return cx18_i2c_hw(cx, cx->card->hw_audio_ctrl,
+	err = cx18_i2c_hw(cx, cx->card->hw_audio_ctrl,
 			VIDIOC_INT_S_AUDIO_ROUTING, &route);
+	if (err)
+		return err;
+
+	val = read_reg(CX18_AUDIO_ENABLE) & ~0x30;
+	val |= (audio_input > CX18_AV_AUDIO_SERIAL2) ? 0x20 :
+					(audio_input << 4);
+	write_reg(val | 0xb00, CX18_AUDIO_ENABLE);
+	cx18_vapi(cx, CX18_APU_RESETAI, 1, 0);
+	return 0;
 }
 
 void cx18_audio_set_route(struct cx18 *cx, struct v4l2_routing *route)
diff --git a/linux/drivers/media/video/cx18/cx18-av-audio.c b/linux/drivers/media/video/cx18/cx18-av-audio.c
index 2dc3a5dd1..c40a286de 100644
--- a/linux/drivers/media/video/cx18/cx18-av-audio.c
+++ b/linux/drivers/media/video/cx18/cx18-av-audio.c
@@ -34,7 +34,7 @@ static int set_audclk_freq(struct cx18 *cx, u32 freq)
 	/* SA_MCLK_SEL=1, SA_MCLK_DIV=0x10 */
 	cx18_av_write(cx, 0x127, 0x50);
 
-	if (state->aud_input != CX18_AV_AUDIO_SERIAL) {
+	if (state->aud_input > CX18_AV_AUDIO_SERIAL2) {
 		switch (freq) {
 		case 32000:
 			/* VID_PLL and AUX_PLL */
@@ -148,7 +148,7 @@ void cx18_av_audio_set_path(struct cx18 *cx)
 	/* Mute everything to prevent the PFFT! */
 	cx18_av_write(cx, 0x8d3, 0x1f);
 
-	if (state->aud_input == CX18_AV_AUDIO_SERIAL) {
+	if (state->aud_input <= CX18_AV_AUDIO_SERIAL2) {
 		/* Set Path1 to Serial Audio Input */
 		cx18_av_write4(cx, 0x8d0, 0x01011012);
 
@@ -165,7 +165,7 @@ void cx18_av_audio_set_path(struct cx18 *cx)
 	/* deassert soft reset */
 	cx18_av_and_or(cx, 0x810, ~0x1, 0x00);
 
-	if (state->aud_input != CX18_AV_AUDIO_SERIAL) {
+	if (state->aud_input > CX18_AV_AUDIO_SERIAL2) {
 		/* When the microcontroller detects the
 		 * audio format, it will unmute the lines */
 		cx18_av_and_or(cx, 0x803, ~0x10, 0x10);
@@ -271,7 +271,7 @@ static void set_mute(struct cx18 *cx, int mute)
 {
 	struct cx18_av_state *state = &cx->av_state;
 
-	if (state->aud_input != CX18_AV_AUDIO_SERIAL) {
+	if (state->aud_input > CX18_AV_AUDIO_SERIAL2) {
 		/* Must turn off microcontroller in order to mute sound.
 		 * Not sure if this is the best method, but it does work.
 		 * If the microcontroller is running, then it will undo any
@@ -298,14 +298,14 @@ int cx18_av_audio(struct cx18 *cx, unsigned int cmd, void *arg)
 
 	switch (cmd) {
 	case VIDIOC_INT_AUDIO_CLOCK_FREQ:
-		if (state->aud_input != CX18_AV_AUDIO_SERIAL) {
+		if (state->aud_input > CX18_AV_AUDIO_SERIAL2) {
 			cx18_av_and_or(cx, 0x803, ~0x10, 0);
 			cx18_av_write(cx, 0x8d3, 0x1f);
 		}
 		cx18_av_and_or(cx, 0x810, ~0x1, 1);
 		retval = set_audclk_freq(cx, *(u32 *)arg);
 		cx18_av_and_or(cx, 0x810, ~0x1, 0);
-		if (state->aud_input != CX18_AV_AUDIO_SERIAL)
+		if (state->aud_input > CX18_AV_AUDIO_SERIAL2)
 			cx18_av_and_or(cx, 0x803, ~0x10, 0x10);
 		return retval;
 
diff --git a/linux/drivers/media/video/cx18/cx18-av-core.c b/linux/drivers/media/video/cx18/cx18-av-core.c
index faca43eb9..3ccdf613b 100644
--- a/linux/drivers/media/video/cx18/cx18-av-core.c
+++ b/linux/drivers/media/video/cx18/cx18-av-core.c
@@ -69,58 +69,6 @@ int cx18_av_and_or4(struct cx18 *cx, u16 addr, u32 and_mask,
 			     or_value);
 }
 
-int cx18_av_write_no_acfg(struct cx18 *cx, u16 addr, u8 value, int no_acfg_mask)
-{
-	int retval;
-	u32 saved_reg[8] = {0};
-
-	if (no_acfg_mask & CXADEC_NO_ACFG_AFE) {
-		saved_reg[0] = cx18_av_read4(cx, CXADEC_CHIP_CTRL);
-		saved_reg[1] = cx18_av_read4(cx, CXADEC_AFE_CTRL);
-	}
-
-	if (no_acfg_mask & CXADEC_NO_ACFG_PLL) {
-		saved_reg[2] = cx18_av_read4(cx, CXADEC_PLL_CTRL1);
-		saved_reg[3] = cx18_av_read4(cx, CXADEC_VID_PLL_FRAC);
-	}
-
-	if (no_acfg_mask & CXADEC_NO_ACFG_VID) {
-		saved_reg[4] = cx18_av_read4(cx, CXADEC_HORIZ_TIM_CTRL);
-		saved_reg[5] = cx18_av_read4(cx, CXADEC_VERT_TIM_CTRL);
-		saved_reg[6] = cx18_av_read4(cx, CXADEC_SRC_COMB_CFG);
-		saved_reg[7] = cx18_av_read4(cx, CXADEC_CHROMA_VBIOFF_CFG);
-	}
-
-	retval = cx18_av_write(cx, addr, value);
-
-	if (no_acfg_mask & CXADEC_NO_ACFG_AFE) {
-		cx18_av_write4(cx, CXADEC_CHIP_CTRL, saved_reg[0]);
-		cx18_av_write4(cx, CXADEC_AFE_CTRL,  saved_reg[1]);
-	}
-
-	if (no_acfg_mask & CXADEC_NO_ACFG_PLL) {
-		cx18_av_write4(cx, CXADEC_PLL_CTRL1,    saved_reg[2]);
-		cx18_av_write4(cx, CXADEC_VID_PLL_FRAC, saved_reg[3]);
-	}
-
-	if (no_acfg_mask & CXADEC_NO_ACFG_VID) {
-		cx18_av_write4(cx, CXADEC_HORIZ_TIM_CTRL,    saved_reg[4]);
-		cx18_av_write4(cx, CXADEC_VERT_TIM_CTRL,     saved_reg[5]);
-		cx18_av_write4(cx, CXADEC_SRC_COMB_CFG,      saved_reg[6]);
-		cx18_av_write4(cx, CXADEC_CHROMA_VBIOFF_CFG, saved_reg[7]);
-	}
-
-	return retval;
-}
-
-int cx18_av_and_or_no_acfg(struct cx18 *cx, u16 addr, unsigned and_mask,
-			   u8 or_value, int no_acfg_mask)
-{
-	return cx18_av_write_no_acfg(cx, addr,
-				     (cx18_av_read(cx, addr) & and_mask) |
-				     or_value, no_acfg_mask);
-}
-
 /* ----------------------------------------------------------------------- */
 
 static int set_input(struct cx18 *cx, enum cx18_av_video_input vid_input,
@@ -221,16 +169,9 @@ static void input_change(struct cx18 *cx)
 	v4l2_std_id std = state->std;
 
 	/* Follow step 8c and 8d of section 3.16 in the cx18_av datasheet */
-	if (std & V4L2_STD_SECAM)
-		cx18_av_write_no_acfg(cx, 0x402, 0, CXADEC_NO_ACFG_ALL);
-	else {
-		cx18_av_write_no_acfg(cx, 0x402, 0x04, CXADEC_NO_ACFG_ALL);
-		cx18_av_write(cx, 0x49f, (std & V4L2_STD_NTSC) ? 0x14 : 0x11);
-	}
-	cx18_av_and_or_no_acfg(cx, 0x401, ~0x60, 0,
-				CXADEC_NO_ACFG_PLL | CXADEC_NO_ACFG_VID);
-	cx18_av_and_or_no_acfg(cx, 0x401, ~0x60, 0x60,
-				CXADEC_NO_ACFG_PLL | CXADEC_NO_ACFG_VID);
+	cx18_av_write(cx, 0x49f, (std & V4L2_STD_NTSC) ? 0x14 : 0x11);
+	cx18_av_and_or(cx, 0x401, ~0x60, 0);
+	cx18_av_and_or(cx, 0x401, ~0x60, 0x60);
 
 	if (std & V4L2_STD_525_60) {
 		if (std == V4L2_STD_NTSC_M_JP) {
@@ -300,7 +241,8 @@ static int set_input(struct cx18 *cx, enum cx18_av_video_input vid_input,
 	}
 
 	switch (aud_input) {
-	case CX18_AV_AUDIO_SERIAL:
+	case CX18_AV_AUDIO_SERIAL1:
+	case CX18_AV_AUDIO_SERIAL2:
 		/* do nothing, use serial audio input */
 		break;
 	case CX18_AV_AUDIO4: reg &= ~0x30; break;
@@ -316,8 +258,7 @@ static int set_input(struct cx18 *cx, enum cx18_av_video_input vid_input,
 
 	cx18_av_write(cx, 0x103, reg);
 	/* Set INPUT_MODE to Composite (0) or S-Video (1) */
-	cx18_av_and_or_no_acfg(cx, 0x401, ~0x6, is_composite ? 0 : 0x02,
-				CXADEC_NO_ACFG_PLL | CXADEC_NO_ACFG_VID);
+	cx18_av_and_or(cx, 0x401, ~0x6, is_composite ? 0 : 0x02);
 	/* Set CH_SEL_ADC2 to 1 if input comes from CH3 */
 	cx18_av_and_or(cx, 0x102, ~0x2, (reg & 0x80) == 0 ? 2 : 0);
 	/* Set DUAL_MODE_ADC2 to 1 if input comes from both CH2 and CH3 */
@@ -373,12 +314,12 @@ static int set_v4lstd(struct cx18 *cx)
 	   This happens for example with the Yuan MPC622. */
 	if (fmt >= 4 && fmt < 8) {
 		/* Set format to NTSC-M */
-		cx18_av_and_or_no_acfg(cx, 0x400, ~0xf, 1, CXADEC_NO_ACFG_AFE);
+		cx18_av_and_or(cx, 0x400, ~0xf, 1);
 		/* Turn off LCOMB */
 		cx18_av_and_or(cx, 0x47b, ~6, 0);
 	}
-	cx18_av_and_or_no_acfg(cx, 0x400, ~0xf, fmt, CXADEC_NO_ACFG_AFE);
-	cx18_av_and_or_no_acfg(cx, 0x403, ~0x3, pal_m, CXADEC_NO_ACFG_ALL);
+	cx18_av_and_or(cx, 0x400, ~0x2f, fmt | 0x20);
+	cx18_av_and_or(cx, 0x403, ~0x3, pal_m);
 	cx18_av_vbi_setup(cx);
 	input_change(cx);
 	return 0;
diff --git a/linux/drivers/media/video/cx18/cx18-av-core.h b/linux/drivers/media/video/cx18/cx18-av-core.h
index c172823ce..b54239959 100644
--- a/linux/drivers/media/video/cx18/cx18-av-core.h
+++ b/linux/drivers/media/video/cx18/cx18-av-core.h
@@ -62,7 +62,8 @@ enum cx18_av_video_input {
 
 enum cx18_av_audio_input {
 	/* Audio inputs: serial or In4-In8 */
-	CX18_AV_AUDIO_SERIAL,
+	CX18_AV_AUDIO_SERIAL1,
+	CX18_AV_AUDIO_SERIAL2,
 	CX18_AV_AUDIO4 = 4,
 	CX18_AV_AUDIO5,
 	CX18_AV_AUDIO6,
@@ -295,24 +296,14 @@ struct cx18_av_state {
 #define CXADEC_SELECT_AUDIO_STANDARD_FM    0xF9  /* FM radio */
 #define CXADEC_SELECT_AUDIO_STANDARD_AUTO  0xFF  /* Auto detect */
 
-/* Flags on what to preserve on write to 0x400-0x403 with cx18_av_.*_no_acfg()*/
-#define CXADEC_NO_ACFG_AFE	0x01 /* Preserve 0x100-0x107 */
-#define CXADEC_NO_ACFG_PLL	0x02 /* Preserve 0x108-0x10f */
-#define CXADEC_NO_ACFG_VID	0x04 /* Preserve 0x470-0x47f */
-#define CXADEC_NO_ACFG_ALL	0x07
-
 /* ----------------------------------------------------------------------- */
 /* cx18_av-core.c 							   */
 int cx18_av_write(struct cx18 *cx, u16 addr, u8 value);
 int cx18_av_write4(struct cx18 *cx, u16 addr, u32 value);
-int cx18_av_write_no_acfg(struct cx18 *cx, u16 addr, u8 value,
-				int no_acfg_mask);
 u8 cx18_av_read(struct cx18 *cx, u16 addr);
 u32 cx18_av_read4(struct cx18 *cx, u16 addr);
 int cx18_av_and_or(struct cx18 *cx, u16 addr, unsigned mask, u8 value);
 int cx18_av_and_or4(struct cx18 *cx, u16 addr, u32 mask, u32 value);
-int cx18_av_and_or_no_acfg(struct cx18 *cx, u16 addr, unsigned mask, u8 value,
-				int no_acfg_mask);
 int cx18_av_cmd(struct cx18 *cx, unsigned int cmd, void *arg);
 
 /* ----------------------------------------------------------------------- */
diff --git a/linux/drivers/media/video/cx18/cx18-av-firmware.c b/linux/drivers/media/video/cx18/cx18-av-firmware.c
index 526e14215..6fa3b01a1 100644
--- a/linux/drivers/media/video/cx18/cx18-av-firmware.c
+++ b/linux/drivers/media/video/cx18/cx18-av-firmware.c
@@ -22,6 +22,7 @@
 #include "cx18-driver.h"
 #include <linux/firmware.h>
 
+#define CX18_AUDIO_ENABLE 0xc72014
 #define FWFILE "v4l-cx23418-dig.fw"
 
 int cx18_av_loadfw(struct cx18 *cx)
@@ -31,40 +32,58 @@ int cx18_av_loadfw(struct cx18 *cx)
 	u32 v;
 	u8 *ptr;
 	int i;
+	int retries = 0;
 
 	if (request_firmware(&fw, FWFILE, &cx->dev->dev) != 0) {
 		CX18_ERR("unable to open firmware %s\n", FWFILE);
 		return -EINVAL;
 	}
 
-	cx18_av_write4(cx, CXADEC_CHIP_CTRL, 0x00010000);
-	cx18_av_write(cx, CXADEC_STD_DET_CTL, 0xf6); /* Byte 0 */
-
-	/* Reset the Mako core (Register is undocumented.) */
-	cx18_av_write4(cx, 0x8100, 0x00010000);
-
-	/* Put the 8051 in reset and enable firmware upload */
-	cx18_av_write4(cx, CXADEC_DL_CTL, 0x0F000000);
-
-	ptr = fw->data;
-	size = fw->size;
-
-	for (i = 0; i < size; i++) {
-		u32 dl_control = 0x0F000000 | ((u32)ptr[i] << 16);
-		u32 value = 0;
-		int retries;
-
-		for (retries = 0; retries < 5; retries++) {
-			cx18_av_write4(cx, CXADEC_DL_CTL, dl_control);
-			value = cx18_av_read4(cx, CXADEC_DL_CTL);
-			if ((value & 0x3F00) == (dl_control & 0x3F00))
+	/* The firmware load often has byte errors, so allow for several
+	   retries, both at byte level and at the firmware load level. */
+	while (retries < 5) {
+		cx18_av_write4(cx, CXADEC_CHIP_CTRL, 0x00010000);
+		cx18_av_write(cx, CXADEC_STD_DET_CTL, 0xf6);
+
+		/* Reset the Mako core (Register is undocumented.) */
+		cx18_av_write4(cx, 0x8100, 0x00010000);
+
+		/* Put the 8051 in reset and enable firmware upload */
+		cx18_av_write4(cx, CXADEC_DL_CTL, 0x0F000000);
+
+		ptr = fw->data;
+		size = fw->size;
+
+		for (i = 0; i < size; i++) {
+			u32 dl_control = 0x0F000000 | i | ((u32)ptr[i] << 16);
+			u32 value = 0;
+			int retries;
+
+			for (retries = 0; retries < 5; retries++) {
+				cx18_av_write4(cx, CXADEC_DL_CTL, dl_control);
+				udelay(10);
+				value = cx18_av_read4(cx, CXADEC_DL_CTL);
+				if (value == dl_control)
+					break;
+				/* Check if we can correct the byte by changing
+				   the address.  We can only write the lower
+				   address byte of the address. */
+				if ((value & 0x3F00) != (dl_control & 0x3F00)) {
+					retries = 5;
+					break;
+				}
+			}
+			if (retries >= 5)
 				break;
 		}
-		if (retries >= 5) {
-			CX18_ERR("unable to load firmware %s\n", FWFILE);
-			release_firmware(fw);
-			return -EIO;
-		}
+		if (i == size)
+			break;
+		retries++;
+	}
+	if (retries >= 5) {
+		CX18_ERR("unable to load firmware %s\n", FWFILE);
+		release_firmware(fw);
+		return -EIO;
 	}
 
 	cx18_av_write4(cx, CXADEC_DL_CTL, 0x13000000 | fw->size);
@@ -100,7 +119,6 @@ int cx18_av_loadfw(struct cx18 *cx)
 	   have a name in the spec. */
 	cx18_av_write4(cx, 0x09CC, 1);
 
-#define CX18_AUDIO_ENABLE            	0xc72014
 	v = read_reg(CX18_AUDIO_ENABLE);
 	/* If bit 11 is 1 */
 	if (v & 0x800)
diff --git a/linux/drivers/media/video/cx18/cx18-av-vbi.c b/linux/drivers/media/video/cx18/cx18-av-vbi.c
index d09f1daf4..0c92f1236 100644
--- a/linux/drivers/media/video/cx18/cx18-av-vbi.c
+++ b/linux/drivers/media/video/cx18/cx18-av-vbi.c
@@ -108,18 +108,18 @@ void cx18_av_vbi_setup(struct cx18 *cx)
 		src_decimation = 0x21f;
 
 		luma_lpf = 2;
-		if (std & V4L2_STD_SECAM) {
-			uv_lpf = 0;
-			comb = 0;
-			sc = 0x0a425f;
-		} else if (std == V4L2_STD_PAL_Nc) {
+		if (std & V4L2_STD_PAL) {
 			uv_lpf = 1;
 			comb = 0x20;
-			sc = 556453;
-		} else {
+			sc = 0x0a8263;
+		} else if (std == V4L2_STD_PAL_Nc) {
 			uv_lpf = 1;
 			comb = 0x20;
-			sc = 0x0a8263;
+			sc = 0x087da5;
+		} else { /* SECAM */
+			uv_lpf = 0;
+			comb = 0;
+			sc = 0x0a425f;
 		}
 	} else {
 		hactive = 720;
@@ -127,25 +127,20 @@ void cx18_av_vbi_setup(struct cx18 *cx)
 		vactive = 487;
 		luma_lpf = 1;
 		uv_lpf = 1;
+		vblank = 26;
+		vblank656 = 26;
 
 		src_decimation = 0x21f;
 		if (std == V4L2_STD_PAL_60) {
-			vblank = 26;
-			vblank656 = 26;
 			burst = 0x5b;
 			luma_lpf = 2;
 			comb = 0x20;
 			sc = 0x0a8263;
 		} else if (std == V4L2_STD_PAL_M) {
-			vblank = 20;
-			vblank656 = 24;
 			burst = 0x61;
 			comb = 0x20;
-
 			sc = 555452;
 		} else {
-			vblank = 26;
-			vblank656 = 26;
 			burst = 0x5b;
 			comb = 0x66;
 			sc = 556063;
diff --git a/linux/drivers/media/video/cx18/cx18-cards.c b/linux/drivers/media/video/cx18/cx18-cards.c
index 0b892aaca..bb45bcf68 100644
--- a/linux/drivers/media/video/cx18/cx18-cards.c
+++ b/linux/drivers/media/video/cx18/cx18-cards.c
@@ -67,12 +67,12 @@ static const struct cx18_card cx18_card_hvr1600_esmt = {
 		{ CX18_CARD_INPUT_AUD_TUNER,
 		  CX18_AV_AUDIO8, CS5345_IN_1 | CS5345_MCLK_1_5 },
 		{ CX18_CARD_INPUT_LINE_IN1,
-		  CX18_AV_AUDIO_SERIAL, CS5345_IN_2 },
+		  CX18_AV_AUDIO_SERIAL1, CS5345_IN_2 },
 		{ CX18_CARD_INPUT_LINE_IN2,
-		  CX18_AV_AUDIO_SERIAL, CS5345_IN_3 },
+		  CX18_AV_AUDIO_SERIAL1, CS5345_IN_3 },
 	},
 	.radio_input = { CX18_CARD_INPUT_AUD_TUNER,
-			 CX18_AV_AUDIO_SERIAL, CS5345_IN_4 },
+			 CX18_AV_AUDIO_SERIAL1, CS5345_IN_4 },
 	.ddr = {
 		/* ESMT M13S128324A-5B memory */
 		.chip_config = 0x003,
@@ -112,12 +112,12 @@ static const struct cx18_card cx18_card_hvr1600_samsung = {
 		{ CX18_CARD_INPUT_AUD_TUNER,
 		  CX18_AV_AUDIO8, CS5345_IN_1 | CS5345_MCLK_1_5 },
 		{ CX18_CARD_INPUT_LINE_IN1,
-		  CX18_AV_AUDIO_SERIAL, CS5345_IN_2 },
+		  CX18_AV_AUDIO_SERIAL1, CS5345_IN_2 },
 		{ CX18_CARD_INPUT_LINE_IN2,
-		  CX18_AV_AUDIO_SERIAL, CS5345_IN_3 },
+		  CX18_AV_AUDIO_SERIAL1, CS5345_IN_3 },
 	},
 	.radio_input = { CX18_CARD_INPUT_AUD_TUNER,
-			 CX18_AV_AUDIO_SERIAL, CS5345_IN_4 },
+			 CX18_AV_AUDIO_SERIAL1, CS5345_IN_4 },
 	.ddr = {
 		/* Samsung K4D263238G-VC33 memory */
 		.chip_config = 0x003,
@@ -163,10 +163,10 @@ static const struct cx18_card cx18_card_h900 = {
 		{ CX18_CARD_INPUT_AUD_TUNER,
 		  CX18_AV_AUDIO8, 0 },
 		{ CX18_CARD_INPUT_LINE_IN1,
-		  CX18_AV_AUDIO_SERIAL, 0 },
+		  CX18_AV_AUDIO_SERIAL1, 0 },
 	},
 	.radio_input = { CX18_CARD_INPUT_AUD_TUNER,
-			 CX18_AV_AUDIO_SERIAL, 0 },
+			 CX18_AV_AUDIO_SERIAL1, 0 },
 	.tuners = {
 		{ .std = V4L2_STD_ALL, .tuner = TUNER_XC2028 },
 	},
@@ -211,11 +211,11 @@ static const struct cx18_card cx18_card_mpc718 = {
 		{ CX18_CARD_INPUT_COMPOSITE3, 2, CX18_AV_COMPOSITE3 },
 	},
 	.audio_inputs = {
-		{ CX18_CARD_INPUT_AUD_TUNER, CX18_AV_AUDIO5,       0 },
-		{ CX18_CARD_INPUT_LINE_IN1,  CX18_AV_AUDIO_SERIAL, 0 },
-		{ CX18_CARD_INPUT_LINE_IN2,  CX18_AV_AUDIO_SERIAL, 0 },
+		{ CX18_CARD_INPUT_AUD_TUNER, CX18_AV_AUDIO5,        0 },
+		{ CX18_CARD_INPUT_LINE_IN1,  CX18_AV_AUDIO_SERIAL1, 0 },
+		{ CX18_CARD_INPUT_LINE_IN2,  CX18_AV_AUDIO_SERIAL1, 0 },
 	},
-	.radio_input = { CX18_CARD_INPUT_AUD_TUNER, CX18_AV_AUDIO_SERIAL, 0 },
+	.radio_input = { CX18_CARD_INPUT_AUD_TUNER, CX18_AV_AUDIO_SERIAL1, 0 },
 	.tuners = {
 		/* XC3028 tuner */
 		{ .std = V4L2_STD_ALL, .tuner = TUNER_XC2028 },
@@ -261,14 +261,14 @@ static const struct cx18_card cx18_card_cnxt_raptor_pal = {
 		{ CX18_CARD_INPUT_COMPOSITE2, 2, CX18_AV_COMPOSITE6 },
 	},
 	.audio_inputs = {
-		{ CX18_CARD_INPUT_AUD_TUNER, CX18_AV_AUDIO_SERIAL, 0 },
-		{ CX18_CARD_INPUT_LINE_IN1,  CX18_AV_AUDIO_SERIAL, 1 },
-		{ CX18_CARD_INPUT_LINE_IN2,  CX18_AV_AUDIO_SERIAL, 1 },
+		{ CX18_CARD_INPUT_AUD_TUNER, CX18_AV_AUDIO5, 	    0 },
+		{ CX18_CARD_INPUT_LINE_IN1,  CX18_AV_AUDIO_SERIAL1, 1 },
+		{ CX18_CARD_INPUT_LINE_IN2,  CX18_AV_AUDIO_SERIAL2, 1 },
 	},
 	.tuners = {
 		{ .std = V4L2_STD_PAL_SECAM, .tuner = TUNER_PHILIPS_FM1216ME_MK3 },
 	},
-	.radio_input = { CX18_CARD_INPUT_AUD_TUNER, CX18_AV_AUDIO_SERIAL, 2 },
+	.radio_input = { CX18_CARD_INPUT_AUD_TUNER, CX18_AV_AUDIO_SERIAL1, 2 },
 	.ddr = {
 		/* MT 46V16M16 memory */
 		.chip_config = 0x50306,
diff --git a/linux/drivers/media/video/cx18/cx18-driver.c b/linux/drivers/media/video/cx18/cx18-driver.c
index 71bb04ab9..e73de6252 100644
--- a/linux/drivers/media/video/cx18/cx18-driver.c
+++ b/linux/drivers/media/video/cx18/cx18-driver.c
@@ -436,7 +436,7 @@ static int __devinit cx18_init_struct1(struct cx18 *cx)
 		(cx->params.video_temporal_filter_mode << 1) |
 		(cx->params.video_median_filter_type << 2);
 	cx->params.port = CX2341X_PORT_MEMORY;
-	cx->params.capabilities = 0;
+	cx->params.capabilities = CX2341X_CAP_HAS_TS;
 	init_waitqueue_head(&cx->cap_w);
 	init_waitqueue_head(&cx->mb_apu_waitq);
 	init_waitqueue_head(&cx->mb_cpu_waitq);
@@ -722,6 +722,12 @@ static int __devinit cx18_probe(struct pci_dev *dev,
 	/* if no tuner was found, then pick the first tuner in the card list */
 	if (cx->options.tuner == -1 && cx->card->tuners[0].std) {
 		cx->std = cx->card->tuners[0].std;
+		if (cx->std & V4L2_STD_PAL)
+			cx->std = V4L2_STD_PAL_BG | V4L2_STD_PAL_H;
+		else if (cx->std & V4L2_STD_NTSC)
+			cx->std = V4L2_STD_NTSC_M;
+		else if (cx->std & V4L2_STD_SECAM)
+			cx->std = V4L2_STD_SECAM_L;
 		cx->options.tuner = cx->card->tuners[0].tuner;
 	}
 	if (cx->options.radio == -1)
diff --git a/linux/drivers/media/video/cx18/cx18-firmware.c b/linux/drivers/media/video/cx18/cx18-firmware.c
index 2c280728d..2d630d9f7 100644
--- a/linux/drivers/media/video/cx18/cx18-firmware.c
+++ b/linux/drivers/media/video/cx18/cx18-firmware.c
@@ -41,9 +41,6 @@
 
 #define CX18_REG_BUS_TIMEOUT_EN      	0xc72024
 
-#define CX18_AUDIO_ENABLE            	0xc72014
-#define CX18_REG_BUS_TIMEOUT_EN      	0xc72024
-
 #define CX18_FAST_CLOCK_PLL_INT      	0xc78000
 #define CX18_FAST_CLOCK_PLL_FRAC     	0xc78004
 #define CX18_FAST_CLOCK_PLL_POST     	0xc78008
@@ -90,7 +87,7 @@
 #define CX18_DSP0_INTERRUPT_MASK     	0xd0004C
 
 /* Encoder/decoder firmware sizes */
-#define CX18_FW_CPU_SIZE 		(174716)
+#define CX18_FW_CPU_SIZE 		(158332)
 #define CX18_FW_APU_SIZE 		(141200)
 
 #define APU_ROM_SYNC1 0x6D676553 /* "mgeS" */
diff --git a/linux/drivers/media/video/cx18/cx18-mailbox.c b/linux/drivers/media/video/cx18/cx18-mailbox.c
index 2a5ccef91..93177514e 100644
--- a/linux/drivers/media/video/cx18/cx18-mailbox.c
+++ b/linux/drivers/media/video/cx18/cx18-mailbox.c
@@ -81,6 +81,7 @@ static const struct cx18_api_info api_info[] = {
 	API_ENTRY(CPU, CX18_CPU_GET_ENC_PTS,                    0),
 	API_ENTRY(CPU, CX18_CPU_DE_SET_MDL_ACK,			0),
 	API_ENTRY(CPU, CX18_CPU_DE_SET_MDL,			API_FAST),
+	API_ENTRY(CPU, CX18_APU_RESETAI,			API_FAST),
 	API_ENTRY(0, 0,						0),
 };
 
diff --git a/linux/drivers/media/video/cx18/cx23418.h b/linux/drivers/media/video/cx18/cx23418.h
index 33f78da9d..e7ed05305 100644
--- a/linux/drivers/media/video/cx18/cx23418.h
+++ b/linux/drivers/media/video/cx18/cx23418.h
@@ -52,6 +52,11 @@
 #define EPU_CMD_MASK_DEBUG       		(EPU_CMD_MASK | 0x000000)
 #define EPU_CMD_MASK_DE                     	(EPU_CMD_MASK | 0x040000)
 
+#define APU_CMD_MASK 				0x10000000
+#define APU_CMD_MASK_ACK 			(APU_CMD_MASK | 0x80000000)
+
+#define CX18_APU_RESETAI 			(APU_CMD_MASK | 0x05)
+
 /* Description: This command indicates that a Memory Descriptor List has been
    filled with the requested channel type
    IN[0] - Task handle. Handle of the task
diff --git a/linux/drivers/media/video/ivtv/ivtv-driver.c b/linux/drivers/media/video/ivtv/ivtv-driver.c
index 284610c3c..c0b98a83b 100644
--- a/linux/drivers/media/video/ivtv/ivtv-driver.c
+++ b/linux/drivers/media/video/ivtv/ivtv-driver.c
@@ -1132,6 +1132,12 @@ static int __devinit ivtv_probe(struct pci_dev *dev,
 	/* if no tuner was found, then pick the first tuner in the card list */
 	if (itv->options.tuner == -1 && itv->card->tuners[0].std) {
 		itv->std = itv->card->tuners[0].std;
+		if (itv->std & V4L2_STD_PAL)
+			itv->std = V4L2_STD_PAL_BG | V4L2_STD_PAL_H;
+		else if (itv->std & V4L2_STD_NTSC)
+			itv->std = V4L2_STD_NTSC_M;
+		else if (itv->std & V4L2_STD_SECAM)
+			itv->std = V4L2_STD_SECAM_L;
 		itv->options.tuner = itv->card->tuners[0].tuner;
 	}
 	if (itv->options.radio == -1)
diff --git a/linux/drivers/media/video/ivtv/ivtv-streams.c b/linux/drivers/media/video/ivtv/ivtv-streams.c
index da84b9088..d2dd89519 100644
--- a/linux/drivers/media/video/ivtv/ivtv-streams.c
+++ b/linux/drivers/media/video/ivtv/ivtv-streams.c
@@ -217,8 +217,8 @@ static int ivtv_prep_dev(struct ivtv *itv, int type)
 	if (itv->v4l2_cap & V4L2_CAP_VIDEO_OUTPUT) {
 		s->v4l2dev->type |= VID_TYPE_MPEG_DECODER;
 	}
-	snprintf(s->v4l2dev->name, sizeof(s->v4l2dev->name), "ivtv%d",
-			itv->num);
+	snprintf(s->v4l2dev->name, sizeof(s->v4l2dev->name), "ivtv%d %s",
+			itv->num, s->name);
 
 	s->v4l2dev->minor = minor;
 	s->v4l2dev->dev = &itv->dev->dev;
diff --git a/linux/drivers/media/video/pvrusb2/pvrusb2-hdw.c b/linux/drivers/media/video/pvrusb2/pvrusb2-hdw.c
index 5db03eeda..cf56b10d9 100644
--- a/linux/drivers/media/video/pvrusb2/pvrusb2-hdw.c
+++ b/linux/drivers/media/video/pvrusb2/pvrusb2-hdw.c
@@ -2477,22 +2477,38 @@ static int pvr2_hdw_commit_execute(struct pvr2_hdw *hdw)
 	struct pvr2_ctrl *cptr;
 	int disruptive_change;
 
-	/* When video standard changes, reset the hres and vres values -
-	   but if the user has pending changes there, then let the changes
-	   take priority. */
+	/* Handle some required side effects when the video standard is
+	   changed.... */
 	if (hdw->std_dirty) {
-		/* Rewrite the vertical resolution to be appropriate to the
-		   video standard that has been selected. */
 		int nvres;
+		int gop_size;
 		if (hdw->std_mask_cur & V4L2_STD_525_60) {
 			nvres = 480;
+			gop_size = 15;
 		} else {
 			nvres = 576;
+			gop_size = 12;
 		}
+		/* Rewrite the vertical resolution to be appropriate to the
+		   video standard that has been selected. */
 		if (nvres != hdw->res_ver_val) {
 			hdw->res_ver_val = nvres;
 			hdw->res_ver_dirty = !0;
 		}
+		/* Rewrite the GOP size to be appropriate to the video
+		   standard that has been selected. */
+		if (gop_size != hdw->enc_ctl_state.video_gop_size) {
+			struct v4l2_ext_controls cs;
+			struct v4l2_ext_control c1;
+			memset(&cs, 0, sizeof(cs));
+			memset(&c1, 0, sizeof(c1));
+			cs.controls = &c1;
+			cs.count = 1;
+			c1.id = V4L2_CID_MPEG_VIDEO_GOP_SIZE;
+			c1.value = gop_size;
+			cx2341x_ext_ctrls(&hdw->enc_ctl_state, 0, &cs,
+					  VIDIOC_S_EXT_CTRLS);
+		}
 	}
 
 	if (hdw->input_dirty && hdw->state_pathway_ok &&
diff --git a/linux/drivers/media/video/saa711x.c b/linux/drivers/media/video/saa711x.c
deleted file mode 100644
index 28e0c5711..000000000
--- a/linux/drivers/media/video/saa711x.c
+++ /dev/null
@@ -1,618 +0,0 @@
-/*
- * saa711x - Philips SAA711x video decoder driver version 0.0.1
- *
- * To do: Now, it handles only saa7113/7114. Should be improved to
- * handle all Philips saa711x devices.
- *
- * Based on saa7113 driver from Dave Perks <dperks@ibm.net>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
- */
-
-#include <linux/module.h>
-#include <linux/init.h>
-#include <linux/delay.h>
-#include <linux/errno.h>
-#include <linux/fs.h>
-#include <linux/kernel.h>
-#include <linux/major.h>
-#include <linux/slab.h>
-#include <linux/mm.h>
-#include <linux/signal.h>
-#include <asm/io.h>
-#include <asm/pgtable.h>
-#include <asm/page.h>
-#include <linux/types.h>
-#include <asm/uaccess.h>
-#include "compat.h"
-#include <linux/videodev.h>
-
-MODULE_DESCRIPTION("Philips SAA711x video decoder driver");
-MODULE_AUTHOR("Dave Perks, Jose Ignacio Gijon, Joerg Heckenbach, Mark McClelland, Dwaine Garden");
-MODULE_LICENSE("GPL");
-
-#include <linux/i2c.h>
-#if LINUX_VERSION_CODE < KERNEL_VERSION(2,5,0)
-#include "i2c-compat.h"
-#endif
-
-#define I2C_NAME(s) (s)->name
-
-#include <linux/video_decoder.h>
-
-static int debug;
-module_param(debug, int, 0644);
-MODULE_PARM_DESC(debug, " Set the default Debug level.  Default: 0 (Off) - (0-1)");
-
-
-#define dprintk(num, format, args...) \
-	do { \
-		if (debug >= num) \
-			printk(format, ##args); \
-	} while (0)
-
-/* ----------------------------------------------------------------------- */
-
-struct saa711x {
-	unsigned char reg[32];
-
-	int norm;
-	int input;
-	int enable;
-	int bright;
-	int contrast;
-	int hue;
-	int sat;
-};
-
-#define   I2C_SAA7113        0x4A
-#define   I2C_SAA7114        0x42
-
-/* ----------------------------------------------------------------------- */
-
-static inline int
-saa711x_write (struct i2c_client *client,
-	       u8                 reg,
-	       u8                 value)
-{
-	struct saa711x *decoder = i2c_get_clientdata(client);
-
-	decoder->reg[reg] = value;
-	return i2c_smbus_write_byte_data(client, reg, value);
-}
-
-static int
-saa711x_write_block (struct i2c_client *client,
-		     const u8          *data,
-		     unsigned int       len)
-{
-	int ret = -1;
-	u8 reg;
-
-	/* the saa711x has an autoincrement function, use it if
-	 * the adapter understands raw I2C */
-	if (i2c_check_functionality(client->adapter, I2C_FUNC_I2C)) {
-		/* do raw I2C, not smbus compatible */
-		struct saa711x *decoder = i2c_get_clientdata(client);
-		struct i2c_msg msg;
-		u8 block_data[32];
-
-		msg.addr = client->addr;
-		msg.flags = 0;
-		while (len >= 2) {
-			msg.buf = (char *) block_data;
-			msg.len = 0;
-			block_data[msg.len++] = reg = data[0];
-			do {
-				block_data[msg.len++] =
-				    decoder->reg[reg++] = data[1];
-				len -= 2;
-				data += 2;
-			} while (len >= 2 && data[0] == reg &&
-				 msg.len < 32);
-			if ((ret = i2c_transfer(client->adapter,
-						&msg, 1)) < 0)
-				break;
-		}
-	} else {
-		/* do some slow I2C emulation kind of thing */
-		while (len >= 2) {
-			reg = *data++;
-			if ((ret = saa711x_write(client, reg,
-						 *data++)) < 0)
-				break;
-			len -= 2;
-		}
-	}
-
-	return ret;
-}
-
-static int
-saa711x_init_decoder (struct i2c_client *client,
-	      struct video_decoder_init *init)
-{
-	return saa711x_write_block(client, init->data, init->len);
-}
-
-static inline int
-saa711x_read (struct i2c_client *client,
-	      u8                 reg)
-{
-	return i2c_smbus_read_byte_data(client, reg);
-}
-
-/* ----------------------------------------------------------------------- */
-
-static const unsigned char saa711x_i2c_init[] = {
-	0x00, 0x00,	/* PH711x_CHIP_VERSION 00 - ID byte */
-	0x01, 0x08,	/* PH711x_INCREMENT_DELAY - (1) (1) (1) (1) IDEL3 IDEL2 IDELL1 IDEL0 */
-	0x02, 0xc0,	/* PH711x_ANALOG_INPUT_CONTR_1 - FUSE1 FUSE0 GUDL1 GUDL0 MODE3 MODE2 MODE1 MODE0 */
-	0x03, 0x23,	/* PH711x_ANALOG_INPUT_CONTR_2 - (1) HLNRS VBSL WPOFF HOLDG GAFIX GAI28 GAI18 */
-	0x04, 0x00,	/* PH711x_ANALOG_INPUT_CONTR_3 - GAI17 GAI16 GAI15 GAI14 GAI13 GAI12 GAI11 GAI10 */
-	0x05, 0x00,	/* PH711x_ANALOG_INPUT_CONTR_4 - GAI27 GAI26 GAI25 GAI24 GAI23 GAI22 GAI21 GAI20 */
-	0x06, 0xeb,	/* PH711x_HORIZONTAL_SYNC_START - HSB7 HSB6 HSB5 HSB4 HSB3 HSB2 HSB1 HSB0 */
-	0x07, 0xe0,	/* PH711x_HORIZONTAL_SYNC_STOP - HSS7 HSS6 HSS5 HSS4 HSS3 HSS2 HSS1 HSS0 */
-	0x08, 0x88,	/* PH711x_SYNC_CONTROL - AUFD FSEL FOET HTC1 HTC0 HPLL VNOI1 VNOI0 */
-	0x09, 0x00,	/* PH711x_LUMINANCE_CONTROL - BYPS PREF BPSS1 BPSS0 VBLB UPTCV APER1 APER0 */
-	0x0a, 0x80,	/* PH711x_LUMINANCE_BRIGHTNESS - BRIG7 BRIG6 BRIG5 BRIG4 BRIG3 BRIG2 BRIG1 BRIG0 */
-	0x0b, 0x47,	/* PH711x_LUMINANCE_CONTRAST - CONT7 CONT6 CONT5 CONT4 CONT3 CONT2 CONT1 CONT0 */
-	0x0c, 0x40,	/* PH711x_CHROMA_SATURATION - SATN7 SATN6 SATN5 SATN4 SATN3 SATN2 SATN1 SATN0 */
-	0x0d, 0x00,	/* PH711x_CHROMA_HUE_CONTROL - HUEC7 HUEC6 HUEC5 HUEC4 HUEC3 HUEC2 HUEC1 HUEC0 */
-	0x0e, 0x01,	/* PH711x_CHROMA_CONTROL - CDTO CSTD2 CSTD1 CSTD0 DCCF FCTC CHBW1 CHBW0 */
-	0x0f, 0xaa,	/* PH711x_CHROMA_GAIN_CONTROL - ACGC CGAIN6 CGAIN5 CGAIN4 CGAIN3 CGAIN2 CGAIN1 CGAIN0 */
-	0x10, 0x00,	/* PH711x_FORMAT_DELAY_CONTROL - OFTS1 OFTS0 HDEL1 HDEL0 VRLN YDEL2 YDEL1 YDEL0 */
-	0x11, 0x1C,	/* PH711x_OUTPUT_CONTROL_1 - GPSW1 CM99 GPSW0 HLSEL OEYC OERT VIPB COLO */
-	0x12, 0x01,	/* PH711x_OUTPUT_CONTROL_2 - RTSE13 RTSE12 RTSE11 RTSE10 RTSE03 RTSE02 RTSE01 RTSE00 */
-	0x13, 0x00,	/* PH711x_OUTPUT_CONTROL_3 - ADLSB (1) (1) OLDSB FIDP (1) AOSL1 AOSL0 */
-	0x14, 0x00,	/* RESERVED 14 - (1) (1) (1) (1) (1) (1) (1) (1) */
-	0x15, 0x00,	/* PH711x_V_GATE1_START - VSTA7 VSTA6 VSTA5 VSTA4 VSTA3 VSTA2 VSTA1 VSTA0 */
-	0x16, 0x00,	/* PH711x_V_GATE1_STOP - VSTO7 VSTO6 VSTO5 VSTO4 VSTO3 VSTO2 VSTO1 VSTO0 */
-	0x17, 0x00,	/* PH711x_V_GATE1_MSB - (1) (1) (1) (1) (1) (1) VSTO8 VSTA8 */
-};
-
-static int
-saa711x_command (struct i2c_client *client,
-		 unsigned int       cmd,
-		 void              *arg)
-{
-	struct saa711x *decoder = i2c_get_clientdata(client);
-
-	switch (cmd) {
-
-	case 0:
-	case DECODER_INIT:
-	{
-		struct video_decoder_init *init = arg;
-		if (NULL != init)
-			return saa711x_init_decoder(client, init);
-		else {
-			struct video_decoder_init vdi;
-			vdi.data = saa711x_i2c_init;
-			vdi.len = sizeof(saa711x_i2c_init);
-			return saa711x_init_decoder(client, &vdi);
-		}
-	}
-
-	case DECODER_DUMP:
-	{
-		int i;
-
-		for (i = 0; i < 32; i += 16) {
-			int j;
-
-			printk(KERN_DEBUG "%s: %03x", I2C_NAME(client), i);
-			for (j = 0; j < 16; ++j) {
-				printk(" %02x",
-				       saa711x_read(client, i + j));
-			}
-			printk("\n");
-		}
-	}
-		break;
-
-	case DECODER_GET_CAPABILITIES:
-	{
-		struct video_decoder_capability *cap = arg;
-
-		cap->flags = VIDEO_DECODER_PAL |
-			     VIDEO_DECODER_NTSC |
-			     VIDEO_DECODER_SECAM |
-			     VIDEO_DECODER_AUTO |
-			     VIDEO_DECODER_CCIR;
-		cap->inputs = 8;
-		cap->outputs = 1;
-	}
-		break;
-
-	case DECODER_GET_STATUS:
-	{
-		int *iarg = arg;
-		int status;
-		int res;
-
-		status = saa711x_read(client, 0x1f);
-		dprintk(1, KERN_DEBUG "%s status: 0x%02x\n", I2C_NAME(client),
-			status);
-		res = 0;
-		if ((status & (1 << 6)) == 0) {
-			res |= DECODER_STATUS_GOOD;
-		}
-		switch (decoder->norm) {
-		case VIDEO_MODE_NTSC:
-			res |= DECODER_STATUS_NTSC;
-			break;
-		case VIDEO_MODE_PAL:
-			res |= DECODER_STATUS_PAL;
-			break;
-		case VIDEO_MODE_SECAM:
-			res |= DECODER_STATUS_SECAM;
-			break;
-		default:
-		case VIDEO_MODE_AUTO:
-			if ((status & (1 << 5)) != 0) {
-				res |= DECODER_STATUS_NTSC;
-			} else {
-				res |= DECODER_STATUS_PAL;
-			}
-			break;
-		}
-		if ((status & (1 << 0)) != 0) {
-			res |= DECODER_STATUS_COLOR;
-		}
-		*iarg = res;
-	}
-		break;
-
-	case DECODER_SET_GPIO:
-	{
-		int *iarg = arg;
-		if (0 != *iarg) {
-			saa711x_write(client, 0x11,
-				(decoder->reg[0x11] | 0x80));
-		} else {
-			saa711x_write(client, 0x11,
-				(decoder->reg[0x11] & 0x7f));
-		}
-		break;
-	}
-
-	case DECODER_SET_VBI_BYPASS:
-	{
-		int *iarg = arg;
-		if (0 != *iarg) {
-			saa711x_write(client, 0x13,
-				(decoder->reg[0x13] & 0xf0) | 0x0a);
-		} else {
-			saa711x_write(client, 0x13,
-				(decoder->reg[0x13] & 0xf0));
-		}
-		break;
-	}
-
-	case DECODER_SET_NORM:
-	{
-		int *iarg = arg;
-
-		switch (*iarg) {
-
-		case VIDEO_MODE_NTSC:
-			saa711x_write(client, 0x08,
-				      (decoder->reg[0x08] & 0x3f) | 0x40);
-			saa711x_write(client, 0x0e,
-				      (decoder->reg[0x0e] & 0x8f));
-			break;
-
-		case VIDEO_MODE_PAL:
-			saa711x_write(client, 0x08,
-				      (decoder->reg[0x08] & 0x3f) | 0x00);
-			saa711x_write(client, 0x0e,
-				      (decoder->reg[0x0e] & 0x8f));
-			break;
-
-		case VIDEO_MODE_SECAM:
-			saa711x_write(client, 0x08,
-				      (decoder->reg[0x08] & 0x3f) | 0x00);
-			saa711x_write(client, 0x0e,
-				      (decoder->reg[0x0e] & 0x8f) | 0x50);
-			break;
-
-		case VIDEO_MODE_AUTO:
-			saa711x_write(client, 0x08,
-				      (decoder->reg[0x08] & 0x3f) | 0x80);
-			saa711x_write(client, 0x0e,
-				      (decoder->reg[0x0e] & 0x8f));
-			break;
-
-		default:
-			return -EINVAL;
-
-		}
-		decoder->norm = *iarg;
-	}
-		break;
-
-	case DECODER_SET_INPUT:
-	{
-		int *iarg = arg;
-		if (*iarg < 0 || *iarg > 9) {
-			return -EINVAL;
-		}
-		if (decoder->input != *iarg) {
-			decoder->input = *iarg;
-			/* select mode */
-			saa711x_write(client, 0x02,
-				      (decoder->reg[0x02] & 0xf0) | decoder->input);
-			/* bypass chrominance trap for modes 4..7 */
-			saa711x_write(client, 0x09,
-				      (decoder->reg[0x09] & 0x7f) | ((decoder->input > 3) ? 0x80 : 0));
-		}
-	}
-		break;
-
-	case DECODER_SET_OUTPUT:
-	{
-		int *iarg = arg;
-
-		/* not much choice of outputs */
-		if (*iarg != 0) {
-			return -EINVAL;
-		}
-	}
-		break;
-
-	case DECODER_ENABLE_OUTPUT:
-	{
-		int *iarg = arg;
-		int enable = (*iarg != 0);
-
-		if (decoder->enable != enable) {
-			decoder->enable = enable;
-
-			/* RJ: If output should be disabled (for
-			 * playing videos), we also need a open PLL.
-			 * The input is set to 0 (where no input
-			 * source is connected), although this
-			 * is not necessary.
-			 *
-			 * If output should be enabled, we have to
-			 * reverse the above.
-			 */
-
-			if (decoder->enable) {
-				saa711x_write(client, 0x02,
-					      (decoder->
-					       reg[0x02] & 0xf8) |
-					      decoder->input);
-				saa711x_write(client, 0x08,
-					      (decoder->reg[0x08] & 0xfb));
-				saa711x_write(client, 0x11,
-					      (decoder->
-					       reg[0x11] & 0xf3) | 0x0c);
-			} else {
-				saa711x_write(client, 0x02,
-					      (decoder->reg[0x02] & 0xf8));
-				saa711x_write(client, 0x08,
-					      (decoder->
-					       reg[0x08] & 0xfb) | 0x04);
-				saa711x_write(client, 0x11,
-					      (decoder->reg[0x11] & 0xf3));
-			}
-		}
-	}
-		break;
-
-	case DECODER_SET_PICTURE:
-	{
-		struct video_picture *pic = arg;
-
-		if (decoder->bright != pic->brightness) {
-			/* We want 0 to 255 we get 0-65535 */
-			decoder->bright = pic->brightness;
-			saa711x_write(client, 0x0a, decoder->bright >> 8);
-		}
-		if (decoder->contrast != pic->contrast) {
-			/* We want 0 to 127 we get 0-65535 */
-			decoder->contrast = pic->contrast;
-			saa711x_write(client, 0x0b,
-				      decoder->contrast >> 9);
-		}
-		if (decoder->sat != pic->colour) {
-			/* We want 0 to 127 we get 0-65535 */
-			decoder->sat = pic->colour;
-			saa711x_write(client, 0x0c, decoder->sat >> 9);
-		}
-		if (decoder->hue != pic->hue) {
-			/* We want -128 to 127 we get 0-65535 */
-			decoder->hue = pic->hue;
-			saa711x_write(client, 0x0d,
-				      (decoder->hue - 32768) >> 8);
-		}
-	}
-		break;
-
-	default:
-		return -EINVAL;
-	}
-
-	return 0;
-}
-
-/* ----------------------------------------------------------------------- */
-
-/*
- * Generic i2c probe
- * concerning the addresses: i2c wants 7 bit (without the r/w bit), so '>>1'
- */
-
-/* standard i2c insmod options */
-static unsigned short normal_i2c[] = {
-	I2C_SAA7113>>1,         /* saa7113 */
-	I2C_SAA7114>>1,         /* saa7114 */
-	I2C_CLIENT_END
-};
-
-#if LINUX_VERSION_CODE < KERNEL_VERSION(2,6,13)
-static unsigned short normal_i2c_range[] = { I2C_CLIENT_END };
-#endif
-I2C_CLIENT_INSMOD;
-
-#if LINUX_VERSION_CODE < KERNEL_VERSION(2, 6, 11)
-static int saa711x_i2c_id;
-#endif
-
-static struct i2c_driver i2c_driver_saa711x;
-
-#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,0)
-static int
-saa711x_detect_client (struct i2c_adapter *adapter,
-		       int                 address,
-		       int                 kind)
-#else
-static int
-saa711x_detect_client (struct i2c_adapter *adapter,
-			int address,
-			unsigned short flags, int kind)
-#endif
-{
-	int i;
-	struct i2c_client *client;
-	struct saa711x *decoder;
-	struct video_decoder_init vdi;
-
-	dprintk(1,
-		KERN_INFO
-		"saa711x.c: detecting saa711x client on address 0x%x\n",
-		address << 1);
-
-	/* Check if the adapter supports the needed features */
-	if (!i2c_check_functionality(adapter, I2C_FUNC_SMBUS_BYTE_DATA))
-		return 0;
-
-	client = kzalloc(sizeof(struct i2c_client), GFP_KERNEL);
-	if (client == 0)
-		return -ENOMEM;
-	client->addr = address;
-	client->adapter = adapter;
-	client->driver = &i2c_driver_saa711x;
-#if LINUX_VERSION_CODE <=  KERNEL_VERSION(2,6,15)
-	client->flags = I2C_CLIENT_ALLOW_USE;
-#endif
-#if LINUX_VERSION_CODE < KERNEL_VERSION(2, 6, 11)
-	client->id = saa711x_i2c_id++;
-	snprintf(I2C_NAME(client), sizeof(I2C_NAME(client)) - 1,
-	"saa7111[%d]", client->id);
-#else
-	strlcpy(I2C_NAME(client), "saa711x", sizeof(I2C_NAME(client)));
-#endif
-	decoder = kzalloc(sizeof(struct saa711x), GFP_KERNEL);
-	if (decoder == NULL) {
-		kfree(client);
-		return -ENOMEM;
-	}
-	decoder->norm = VIDEO_MODE_NTSC;
-	decoder->input = 0;
-	decoder->enable = 1;
-	decoder->bright = 32768;
-	decoder->contrast = 32768;
-	decoder->hue = 32768;
-	decoder->sat = 32768;
-	i2c_set_clientdata(client, decoder);
-
-	i = i2c_attach_client(client);
-	if (i) {
-		kfree(client);
-		kfree(decoder);
-		return i;
-	}
-
-	vdi.data = saa711x_i2c_init;
-	vdi.len = sizeof(saa711x_i2c_init);
-	i = saa711x_init_decoder(client, &vdi);
-	if (i < 0) {
-		dprintk(1, KERN_ERR "%s_attach error: init status %d\n",
-			I2C_NAME(client), i);
-	} else {
-		dprintk(1,
-			KERN_INFO
-			"%s_attach: chip version %x at address 0x%x\n",
-			I2C_NAME(client), saa711x_read(client, 0x00) >> 4,
-			client->addr << 1);
-	}
-
-	return 0;
-}
-
-static int
-saa711x_attach_adapter (struct i2c_adapter *adapter)
-{
-	dprintk(1,
-		KERN_INFO
-		"saa711x.c: starting probe for adapter %s (0x%x)\n",
-		I2C_NAME(adapter), adapter->id);
-	return i2c_probe(adapter, &addr_data, &saa711x_detect_client);
-}
-
-static int
-saa711x_detach_client (struct i2c_client *client)
-{
-	struct saa711x *decoder = i2c_get_clientdata(client);
-	int err;
-
-	err = i2c_detach_client(client);
-	if (err) {
-		return err;
-	}
-
-	kfree(decoder);
-	kfree(client);
-
-	return 0;
-}
-
-/* ----------------------------------------------------------------------- */
-
-static struct i2c_driver i2c_driver_saa711x = {
-#if (LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,0))&&(LINUX_VERSION_CODE <= KERNEL_VERSION(2,6,15))
-	.owner = THIS_MODULE,
-#endif
-#if LINUX_VERSION_CODE <=  KERNEL_VERSION(2,6,15)
-	.name = "saa711x",
-	.flags = I2C_DF_NOTIFY,
-#else
-	.driver = {
-		.name = "saa711x",
-	},
-#endif
-	.id = I2C_DRIVERID_SAA711X,
-	.attach_adapter = saa711x_attach_adapter,
-	.detach_client = saa711x_detach_client,
-	.command = saa711x_command,
-};
-
-static int __init
-saa711x_init (void)
-{
-	return i2c_add_driver(&i2c_driver_saa711x);
-}
-
-static void __exit
-saa711x_exit (void)
-{
-	i2c_del_driver(&i2c_driver_saa711x);
-}
-
-module_init(saa711x_init);
-module_exit(saa711x_exit);
diff --git a/linux/drivers/media/video/uvc/Makefile b/linux/drivers/media/video/uvc/Makefile
index fb39bbf9b..968c1994e 100644
--- a/linux/drivers/media/video/uvc/Makefile
+++ b/linux/drivers/media/video/uvc/Makefile
@@ -1,3 +1,3 @@
 uvcvideo-objs  := uvc_driver.o uvc_queue.o uvc_v4l2.o uvc_video.o uvc_ctrl.o \
 		  uvc_status.o uvc_isight.o
-obj-$(CONFIG_USB_VIDEO_CLASS) := uvcvideo.o
+obj-$(CONFIG_USB_VIDEO_CLASS) += uvcvideo.o