Alps TDLB7 DVB-T driver by Juergen Peitz <peitz@snafu.de>

4 files changed, 449 insertions, 0 deletions

diff --git a/linux/drivers/media/dvb/frontends/Config.in b/linux/drivers/media/dvb/frontends/Config.in
index d44894a0b..e397173b4 100644
--- a/linux/drivers/media/dvb/frontends/Config.in
+++ b/linux/drivers/media/dvb/frontends/Config.in
@@ -3,6 +3,7 @@ comment 'Supported Frontend Modules'
 
 dep_tristate '  Alps BSRU6 (QPSK)' CONFIG_DVB_ALPS_BSRU6 $CONFIG_DVB_CORE
 dep_tristate '  Alps BSRV2 (QPSK)' CONFIG_DVB_ALPS_BSRV2 $CONFIG_DVB_CORE
+dep_tristate '  Alps TDLB7 (OFDM)' CONFIG_DVB_ALPS_TDLB7 $CONFIG_DVB_CORE
 dep_tristate '  Alps TDMB7 (OFDM)' CONFIG_DVB_ALPS_TDMB7 $CONFIG_DVB_CORE
 dep_tristate '  Grundig 29504-491 (QPSK)' CONFIG_DVB_GRUNDIG_29504_491 $CONFIG_DVB_CORE
 dep_tristate '  Grundig 29504-401 (OFDM)' CONFIG_DVB_GRUNDIG_29504_401 $CONFIG_DVB_CORE
diff --git a/linux/drivers/media/dvb/frontends/Makefile b/linux/drivers/media/dvb/frontends/Makefile
index 5fd14508f..c693af892 100644
--- a/linux/drivers/media/dvb/frontends/Makefile
+++ b/linux/drivers/media/dvb/frontends/Makefile
@@ -6,6 +6,7 @@ EXTRA_CFLAGS = -Idrivers/media/dvb/dvb-core/
 
 obj-$(CONFIG_DVB_ALPS_BSRU6) += alps_bsru6.o
 obj-$(CONFIG_DVB_ALPS_BSRV2) += alps_bsrv2.o
+obj-$(CONFIG_DVB_ALPS_TDLB7) += alps_tdlb7.o
 obj-$(CONFIG_DVB_ALPS_TDMB7) += alps_tdmb7.o
 obj-$(CONFIG_DVB_GRUNDIG_29504_491) += grundig_29504-491.o
 obj-$(CONFIG_DVB_GRUNDIG_29504_401) += grundig_29504-401.o
diff --git a/linux/drivers/media/dvb/frontends/README.alps_tdlb7 b/linux/drivers/media/dvb/frontends/README.alps_tdlb7
new file mode 100644
index 000000000..6d42294b5
--- /dev/null
+++ b/linux/drivers/media/dvb/frontends/README.alps_tdlb7
@@ -0,0 +1,10 @@
+This tuner module needs the file "Sc_main.mc" from the windows driver.
+It should be copied to "/usr/lib/DVB/driver/frontends". Or give the
+module parameter: mcfile="/PATH/FILENAME". The microcode from this file has 
+to be loaded only once after a power on. Because this takes some 
+time, you can pass the module parameter: loadcode=0 if you only want to 
+reload the dvb driver.
+This driver is working fine on my computer, but I am not a real expert for
+linux modules. So I hope somebody else, who knows more about linux programming
+and dvb frontends, will do some work an this driver.
+If you have questions, mail to peitz@snafu.de
diff --git a/linux/drivers/media/dvb/frontends/alps_tdlb7.c b/linux/drivers/media/dvb/frontends/alps_tdlb7.c
new file mode 100644
index 000000000..82e6e442a
--- /dev/null
+++ b/linux/drivers/media/dvb/frontends/alps_tdlb7.c
@@ -0,0 +1,437 @@
+/*
+    Driver for Alps TDLB7 Frontend
+
+    Copyright (C) 1999 Juergen Peitz <peitz@snafu.de
+
+    This program is free software; you can redistribute it and/or modify
+    it under the terms of the GNU General Public License as published by
+    the Free Software Foundation; either version 2 of the License, or
+    (at your option) any later version.
+
+    This program is distributed in the hope that it will be useful,
+    but WITHOUT ANY WARRANTY; without even the implied warranty of
+    MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+
+    GNU General Public License for more details.
+
+    You should have received a copy of the GNU General Public License
+    along with this program; if not, write to the Free Software
+    Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+
+*/
+
+
+/* 
+    
+    Wrote this code mainly to get my own card running. It's working for me, but I
+    hope somebody who knows more about linux programming and the DVB driver can 
+    improve it.
+    
+    Reused a lot from the existing driver and tuner code.
+    Thanks to everybody who worked on it!
+    
+    This driver needs a copy of the microcode file 'Sc_main.mc' from the Haupauge 
+    windows driver in the 'usr/lib/DVB/driver/frontends' directory.  
+    You can also pass the complete file name with the module parameter 'mcfile'.
+    
+    The code only needs to be loaded once after a power on. Because loading the 
+    microcode to the card takes some time, you can use the 'loadcode=0' module 
+    parameter, if you only want to reload the dvb driver.      
+    
+    Juergen Peitz
+    
+*/  
+
+
+
+#define __KERNEL_SYSCALLS__
+#include <linux/module.h>
+#include <linux/init.h>
+#include <linux/vmalloc.h>
+#include <linux/fs.h>
+#include <linux/unistd.h>
+
+#include "compat.h"
+#include "dvb_frontend.h"
+
+static int debug = 0;
+
+static int loadcode = 1;
+
+static char * mcfile = "/usr/lib/DVB/driver/frontends/Sc_main.mc";
+
+#define dprintk	if (debug) printk
+
+/* microcode size for sp8870 */
+#define SP8870_CODE_SIZE 16384
+
+/* starting point for microcode in file 'Sc_main.mc' */
+#define SP8870_CODE_OFFSET 0x0A
+
+
+static int errno;
+
+static
+struct dvb_frontend_info tdlb7_info = {
+	name: "Alps TDLB7",
+	type: FE_OFDM,
+	frequency_min: 470000000,
+	frequency_max: 860000000,
+	frequency_stepsize: 166666,
+#if 0
+    	frequency_tolerance: ???,
+	symbol_rate_min: ???,
+	symbol_rate_max: ???,
+	symbol_rate_tolerance: ???,
+	notifier_delay: 0,
+#endif
+	caps: FE_CAN_FEC_1_2 | FE_CAN_FEC_2_3 | FE_CAN_FEC_3_4 |
+	      FE_CAN_FEC_5_6 | FE_CAN_FEC_7_8 | FE_CAN_FEC_AUTO |
+	      FE_CAN_QPSK | FE_CAN_QAM_16 | FE_CAN_QAM_64
+};
+
+
+static
+int sp8870_writereg (struct dvb_i2c_bus *i2c, u16 reg, u16 data)
+{
+        u8 buf [] = { reg >> 8, reg & 0xff, data >> 8, data & 0xff };
+	struct i2c_msg msg = { addr: 0x71, flags: 0, buf: buf, len: 4 };
+	int err;
+
+        if ((err = i2c->xfer (i2c, &msg, 1)) != 1) {
+		dprintk ("%s: writereg error (err == %i, reg == 0x%02x, data == 0x%02x)\n", __FUNCTION__, err, reg, data);
+		return -EREMOTEIO;
+	}
+
+        return 0;
+}
+
+
+static
+u16 sp8870_readreg (struct dvb_i2c_bus *i2c, u16 reg)
+{
+	int ret;
+	u8 b0 [] = { reg >> 8 , reg & 0xff };
+	u8 b1 [] = { 0, 0 };
+	struct i2c_msg msg [] = { { addr: 0x71, flags: 0, buf: b0, len: 2 },
+			   { addr: 0x71, flags: I2C_M_RD, buf: b1, len: 2 } };
+
+	ret = i2c->xfer (i2c, msg, 2);
+
+	if (ret != 2)
+		dprintk("%s: readreg error (ret == %i)\n", __FUNCTION__, ret);
+
+	return (b1[0] << 8 | b1[1]);
+}
+
+
+static
+int sp5659_write (struct dvb_i2c_bus *i2c, u8 data [4])
+{
+        int ret;
+        struct i2c_msg msg = { addr: 0x60, flags: 0, buf: data, len: 4 };
+
+        ret = i2c->xfer (i2c, &msg, 1);
+
+        if (ret != 1)
+                printk("%s: i/o error (ret == %i)\n", __FUNCTION__, ret);
+
+        return (ret != 1) ? -1 : 0;
+}
+
+
+static
+int sp5659_set_tv_freq (struct dvb_i2c_bus *i2c, u32 freq, u8 pwr)
+{
+        u32 div = (freq + 36200000) / 166666;
+        u8 buf [4] = { (div >> 8) & 0x7f, div & 0xff, 0x85, (pwr << 5) | 0x30 };
+
+	return sp5659_write (i2c, buf);
+}
+
+
+static
+int sp8870_read_code(const char *fn, char **fp)
+{
+        int fd;
+	loff_t l;
+	char *dp;
+
+	fd = open(fn, 0, 0);
+	if (fd == -1) {
+                printk(KERN_INFO "%s: Unable to load '%s'.\n", __FUNCTION__, fn);
+		return -1;
+	}
+	l = lseek(fd, 0L, 2);
+	if (l <= 0 || l < SP8870_CODE_OFFSET+SP8870_CODE_SIZE) {
+	        printk(KERN_INFO "%s: code file too small '%s'\n", __FUNCTION__, fn);
+		sys_close(fd);
+		return -1;
+	}
+	lseek(fd, SP8870_CODE_OFFSET, 0);
+	*fp= dp = vmalloc(SP8870_CODE_SIZE);
+	if (dp == NULL)	{
+		printk(KERN_INFO "%s: Out of memory loading '%s'.\n", __FUNCTION__, fn);
+		sys_close(fd);
+		return -1;
+	}
+	if (read(fd, dp, SP8870_CODE_SIZE) != SP8870_CODE_SIZE) {
+		printk(KERN_INFO "%s: Failed to read '%s'.\n",__FUNCTION__, fn);
+		vfree(dp);
+		sys_close(fd);
+		return -1;
+	}
+	sys_close(fd);
+	*fp = dp;
+	return 0;
+}
+
+
+static 
+int sp8870_load_code(struct dvb_i2c_bus *i2c)
+{
+	/* this takes a long time. is there a way to do it faster? */
+	char *lcode;
+	struct i2c_msg msg;
+	unsigned char buf[255];
+	int err;
+	int p=0;
+	int c;
+	mm_segment_t fs = get_fs();
+
+	sp8870_writereg(i2c,0x8F08,0x1FFF);
+	sp8870_writereg(i2c,0x8F0A,0x0000);
+
+	set_fs(get_ds());
+        if (sp8870_read_code(mcfile,(char**) &lcode)<0) return -1;
+	set_fs(fs);
+	while (p<SP8870_CODE_SIZE){
+		c = (p<=SP8870_CODE_SIZE-252) ? 252 : SP8870_CODE_SIZE-p;
+		buf[0]=0xCF;
+		buf[1]=0x0A;
+		memcpy(&buf[2],lcode+p,c);
+		c+=2;
+		msg.addr=0x71;
+		msg.flags=0;
+		msg.buf=buf;
+		msg.len=c;
+        	if ((err = i2c->xfer (i2c, &msg, 1)) != 1) {
+			dprintk ("%s: i2c error (err == %i)\n", __FUNCTION__, err);
+        		vfree(lcode);
+			return -EREMOTEIO;
+		}
+
+		p+=252;
+	}
+        vfree(lcode);
+	return 0;
+};
+
+
+static
+int sp8870_init (struct dvb_i2c_bus *i2c)
+{
+
+	dprintk ("%s\n", __FUNCTION__);
+
+	sp8870_readreg(i2c,0x200);
+     	sp8870_readreg(i2c,0x200);
+	sp8870_readreg(i2c,0x0F00);	/* system controller stop */
+	sp8870_readreg(i2c,0x0301);	/* ???????? */
+	sp8870_readreg(i2c,0x0309);	/* integer carrier offset */
+	sp8870_readreg(i2c,0x030A);	/* fractional carrier offset */
+	sp8870_readreg(i2c,0x0311);	/* filter for 8 Mhz channel */
+	sp8870_readreg(i2c,0x0319);	/* sample rate correction bit [23..17] */
+	sp8870_readreg(i2c,0x031A);	/* sample rate correction bit [16..0] */
+	sp8870_readreg(i2c,0x0338);	/* ???????? */
+	sp8870_readreg(i2c,0x0F00);
+	sp8870_readreg(i2c,0x0200);
+
+	if (loadcode) {
+		dprintk("%s: loading mcfile '%s' !\n", __FUNCTION__, mcfile);
+		if (sp8870_load_code(i2c)==0)
+		    dprintk("%s: microcode loaded!\n", __FUNCTION__);
+	}else{
+		dprintk("%s: without loading mcfile!\n", __FUNCTION__);
+	}
+
+	return 0;
+}
+
+
+static
+int sp8870_reset (struct dvb_i2c_bus *i2c)
+{
+	dprintk("%s\n", __FUNCTION__);
+	sp8870_writereg(i2c,0x0F00,0x0000);	/* system controller stop */
+	sp8870_writereg(i2c,0x0301,0x0003);	/* ???????? */
+	sp8870_writereg(i2c,0x0309,0x0400);	/* integer carrier offset */
+	sp8870_writereg(i2c,0x030A,0x0000);	/* fractional carrier offset */
+	sp8870_writereg(i2c,0x0311,0x0000);	/* filter for 8 Mhz channel */
+	sp8870_writereg(i2c,0x0319,0x000A);	/* sample rate correction bit [23..17] */
+	sp8870_writereg(i2c,0x031A,0x0AAB);	/* sample rate correction bit [16..0] */
+	sp8870_writereg(i2c,0x0338,0x0000);	/* ???????? */
+	sp8870_writereg(i2c,0x0201,0x0000);	/* interrupts for change of lock or tuner adjustment disabled */
+	sp8870_writereg(i2c,0x0F00,0x0001);	/* system controller start */
+
+        return 0;
+}
+
+static
+int tdlb7_ioctl (struct dvb_frontend *fe, unsigned int cmd, void *arg)
+{
+	struct dvb_i2c_bus *i2c = fe->i2c;
+
+        switch (cmd) {
+        case FE_GET_INFO:
+		memcpy (arg, &tdlb7_info, sizeof(struct dvb_frontend_info));
+		break;
+
+        case FE_READ_STATUS:
+	{
+		fe_status_t *status = arg;
+		int sync = sp8870_readreg (i2c, 0x0200);
+
+		*status=0;
+
+		if (sync&0x04) // FIXME: find criteria for having signal
+			*status |= FE_HAS_SIGNAL;
+
+		if (sync&0x04) // FIXME: find criteria
+			*status |= FE_HAS_CARRIER;
+
+		if (sync&0x04) // FIXME
+			*status |= FE_HAS_VITERBI;
+
+		if (sync&0x08) // FIXME
+			*status |= FE_HAS_SYNC;
+
+		if (sync&0x04)
+			*status |= FE_HAS_LOCK;
+		break;
+
+	}
+
+        case FE_READ_BER:
+	{
+		u32 *ber=(u32 *) arg;
+		*ber=sp8870_readreg(i2c,0x0C07);  // bit error rate before Viterbi
+		break;
+
+	}
+
+        case FE_READ_SIGNAL_STRENGTH:		// not supported by hardware?
+	{
+		s32 *signal=(s32 *) arg;
+                *signal=0;
+		break;
+	}
+
+        case FE_READ_SNR:			// not supported by hardware?
+	{
+		s32 *snr=(s32 *) arg;
+                *snr=0;  
+		break;
+	}
+
+	case FE_READ_UNCORRECTED_BLOCKS: 	// not supported by hardware?
+	{
+		u32 *ublocks=(u32 *) arg;
+		*ublocks=0;  
+		break;
+	}
+
+        case FE_SET_FRONTEND:
+        {
+		struct dvb_frontend_parameters *p = arg;
+		sp5659_set_tv_freq (i2c, p->frequency, 0);
+		 			// all other parameters are set by the on card
+					// system controller. Don't know how to pass 
+					// distinct values to the card.
+		break;			
+        }
+
+	case FE_GET_FRONTEND: 		// how to do this?
+	{
+		break;
+	}
+
+        case FE_SLEEP:			// is this supported by hardware?
+		return -EOPNOTSUPP;
+
+        case FE_INIT:
+		return sp8870_init (i2c);
+
+	case FE_RESET:
+		return sp8870_reset (i2c);
+
+	default:
+		return -EOPNOTSUPP;
+        };
+
+        return 0;
+}
+
+
+static
+int tdlb7_attach (struct dvb_i2c_bus *i2c)
+{
+
+	struct i2c_msg msg = { addr: 0x71, flags: 0, buf: NULL, len: 0 };
+
+	dprintk ("%s\n", __FUNCTION__);
+
+	if (i2c->xfer (i2c, &msg, 1) != 1)
+                return -ENODEV;
+
+	dvb_register_frontend (tdlb7_ioctl, i2c, NULL, &tdlb7_info);
+
+	return 0;
+}
+
+
+static
+void tdlb7_detach (struct dvb_i2c_bus *i2c)
+{
+	dprintk ("%s\n", __FUNCTION__);
+
+	dvb_unregister_frontend (tdlb7_ioctl, i2c);
+}
+
+
+static
+int __init init_tdlb7 (void)
+{
+	dprintk ("%s\n", __FUNCTION__);
+
+	return dvb_register_i2c_device (THIS_MODULE, tdlb7_attach, tdlb7_detach);
+}
+
+
+static
+void __exit exit_tdlb7 (void)
+{
+	dprintk ("%s\n", __FUNCTION__);
+
+	dvb_unregister_i2c_device (tdlb7_attach);
+}
+
+
+module_init(init_tdlb7);
+module_exit(exit_tdlb7);
+
+
+MODULE_PARM(debug,"i");
+MODULE_PARM_DESC(debug, "enable verbose debug messages");
+
+MODULE_PARM(loadcode,"i");
+MODULE_PARM_DESC(loadcode, "load tuner microcode");
+
+MODULE_PARM(mcfile,"s");
+MODULE_PARM_DESC(mcfile, "where to find the microcode file");
+
+MODULE_DESCRIPTION("TDLB7 DVB-T Frontend");
+MODULE_AUTHOR("Juergen Peitz");
+MODULE_LICENSE("GPL");
+
+