merge: http://linuxtv.org/hg/~tap/v4l-dvb

From: Mauro Carvalho Chehab <mchehab@infradead.org>

Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>

21 files changed, 1287 insertions, 24 deletions

diff --git a/linux/Documentation/video4linux/cx2341x/fw-dma.txt b/linux/Documentation/video4linux/cx2341x/fw-dma.txt
index 8123e262d..be52b6fd1 100644
--- a/linux/Documentation/video4linux/cx2341x/fw-dma.txt
+++ b/linux/Documentation/video4linux/cx2341x/fw-dma.txt
@@ -22,6 +22,8 @@ urged to choose a smaller block size and learn the scatter-gather technique.
 
 Mailbox #10 is reserved for DMA transfer information.
 
+Note: the hardware expects little-endian data ('intel format').
+
 Flow
 ====
 
@@ -64,7 +66,7 @@ addresses are the physical memory location of the target DMA buffer.
 
 Each S-G array element is a struct of three 32-bit words. The first word is
 the source address, the second is the destination address. Both take up the
-entire 32 bits. The lowest 16 bits of the third word is the transfer byte
+entire 32 bits. The lowest 18 bits of the third word is the transfer byte
 count. The high-bit of the third word is the "last" flag. The last-flag tells
 the card to raise the DMA_DONE interrupt. From hard personal experience, if
 you forget to set this bit, the card will still "work" but the stream will
@@ -78,8 +80,8 @@ Array Element:
 
 - 32-bit Source Address
 - 32-bit Destination Address
-- 16-bit reserved (high bit is the last flag)
-- 16-bit byte count
+- 14-bit reserved (high bit is the last flag)
+- 18-bit byte count
 
 DMA Transfer Status
 ===================
@@ -87,8 +89,8 @@ DMA Transfer Status
 Register 0x0004 holds the DMA Transfer Status:
 
 Bit
-4   Scatter-Gather array error
-3   DMA write error
-2   DMA read error
-1   write completed
 0   read completed
+1   write completed
+2   DMA read error
+3   DMA write error
+4   Scatter-Gather array error
diff --git a/linux/Documentation/video4linux/cx2341x/fw-encoder-api.txt b/linux/Documentation/video4linux/cx2341x/fw-encoder-api.txt
index fe02bdb84..e499cc07f 100644
--- a/linux/Documentation/video4linux/cx2341x/fw-encoder-api.txt
+++ b/linux/Documentation/video4linux/cx2341x/fw-encoder-api.txt
@@ -498,12 +498,14 @@ Name 	CX2341X_ENC_GET_PREV_DMA_INFO_MB_9
 Enum 	203/0xCB
 Description
 	Returns information on the previous DMA transfer in conjunction with
-	bit 27 of the interrupt mask. Uses mailbox 9.
+	bit 27 or 18 of the interrupt mask. Uses mailbox 9.
 Result[0]
 	Status bits:
-	    Bit 0 set indicates transfer complete
-	    Bit 2 set indicates transfer error
-	    Bit 4 set indicates linked list error
+		0   read completed
+		1   write completed
+		2   DMA read error
+		3   DMA write error
+		4   Scatter-Gather array error
 Result[1]
 	DMA type
 Result[2]
diff --git a/linux/Documentation/video4linux/cx2341x/fw-memory.txt b/linux/Documentation/video4linux/cx2341x/fw-memory.txt
index d445e457f..9d736fe8d 100644
--- a/linux/Documentation/video4linux/cx2341x/fw-memory.txt
+++ b/linux/Documentation/video4linux/cx2341x/fw-memory.txt
@@ -1,6 +1,8 @@
 This document describes the cx2341x memory map and documents some of the register
 space.
 
+Note: the memory long words are little-endian ('intel format').
+
 Warning! This information was figured out from searching through the memory and
 registers, this information may not be correct and is certainly not complete, and
 was not derived from anything more than searching through the memory space with
@@ -67,7 +69,7 @@ DMA Registers 0x000-0xff:
  0x84 - first write linked list reg, for pci memory addr
  0x88 - first write linked list reg, for length of buffer in memory addr
 	(|0x80000000 or this for last link)
- 0x8c-0xcc - rest of write linked list reg, 8 sets of 3 total, DMA goes here
+ 0x8c-0xdc - rest of write linked list reg, 8 sets of 3 total, DMA goes here
 	from linked list addr in reg 0x0c, firmware must push through or
 	something.
  0xe0 - first (and only) read linked list reg, for pci memory addr
diff --git a/linux/drivers/media/dvb/cinergyT2/cinergyT2.c b/linux/drivers/media/dvb/cinergyT2/cinergyT2.c
index 9c0eff865..0de98c3eb 100644
--- a/linux/drivers/media/dvb/cinergyT2/cinergyT2.c
+++ b/linux/drivers/media/dvb/cinergyT2/cinergyT2.c
@@ -864,6 +864,11 @@ static int cinergyt2_register_rc(struct cinergyt2 *cinergyt2)
 		set_bit(rc_keys[i + 2], input_dev->keybit);
 	input_dev->keycodesize = 0;
 	input_dev->keycodemax = 0;
+	input_dev->id.bustype = BUS_USB;
+	input_dev->id.vendor = cinergyt2->udev->descriptor.idVendor;
+	input_dev->id.product = cinergyt2->udev->descriptor.idProduct;
+	input_dev->id.version = 1;
+	input_dev->cdev.dev = &cinergyt2->udev->dev;
 
 	err = input_register_device(input_dev);
 	if (err) {
diff --git a/linux/drivers/media/dvb/dvb-usb/Kconfig b/linux/drivers/media/dvb/dvb-usb/Kconfig
index ad5214360..861a02939 100644
--- a/linux/drivers/media/dvb/dvb-usb/Kconfig
+++ b/linux/drivers/media/dvb/dvb-usb/Kconfig
@@ -109,6 +109,17 @@ config DVB_USB_CXUSB
 	  Medion MD95700 hybrid USB2.0 device.
 	  DViCO FusionHDTV (Bluebird) USB2.0 devices
 
+config DVB_USB_M920X
+	tristate "Uli m920x DVB-T USB2.0 support"
+	depends on DVB_USB
+	select DVB_MT352 if !DVB_FE_CUSTOMISE
+	select DVB_TUNER_QT1010 if !DVB_FE_CUSTOMISE
+	help
+	  Say Y here to support the MSI Mega Sky 580 USB2.0 DVB-T receiver.
+	  Currently, only devices with a product id of
+	  "DTV USB MINI" (in cold state) are supported.
+	  Firmware required.
+
 config DVB_USB_DIGITV
 	tristate "Nebula Electronics uDigiTV DVB-T USB2.0 support"
 	depends on DVB_USB
diff --git a/linux/drivers/media/dvb/dvb-usb/Makefile b/linux/drivers/media/dvb/dvb-usb/Makefile
index 154d593bb..815e27898 100644
--- a/linux/drivers/media/dvb/dvb-usb/Makefile
+++ b/linux/drivers/media/dvb/dvb-usb/Makefile
@@ -30,6 +30,9 @@ obj-$(CONFIG_DVB_USB_NOVA_T_USB2) += dvb-usb-dibusb-common.o dvb-usb-nova-t-usb2
 dvb-usb-umt-010-objs = umt-010.o
 obj-$(CONFIG_DVB_USB_UMT_010) += dvb-usb-dibusb-common.o dvb-usb-umt-010.o
 
+dvb-usb-m920x-objs = m920x.o
+obj-$(CONFIG_DVB_USB_M920X) += dvb-usb-m920x.o
+
 dvb-usb-digitv-objs = digitv.o
 obj-$(CONFIG_DVB_USB_DIGITV) += dvb-usb-digitv.o
 
diff --git a/linux/drivers/media/dvb/dvb-usb/dvb-usb-ids.h b/linux/drivers/media/dvb/dvb-usb/dvb-usb-ids.h
index 299382dcb..713ec5a82 100644
--- a/linux/drivers/media/dvb/dvb-usb/dvb-usb-ids.h
+++ b/linux/drivers/media/dvb/dvb-usb/dvb-usb-ids.h
@@ -29,6 +29,7 @@
 #define USB_VID_LEADTEK				0x0413
 #define USB_VID_LITEON				0x04ca
 #define USB_VID_MEDION				0x1660
+#define USB_VID_MSI				0x0db0
 #define USB_VID_PINNACLE			0x2304
 #define USB_VID_VISIONPLUS			0x13d3
 #define USB_VID_TWINHAN				0x1822
@@ -119,6 +120,7 @@
 #define USB_PID_DIGITALNOW_BLUEBIRD_DUAL_1_COLD		0xdb54
 #define USB_PID_DIGITALNOW_BLUEBIRD_DUAL_1_WARM		0xdb55
 #define USB_PID_MEDION_MD95700				0x0932
+#define USB_PID_MSI_MEGASKY580				0x5580
 #define USB_PID_KYE_DVB_T_COLD				0x701e
 #define USB_PID_KYE_DVB_T_WARM				0x701f
 #define USB_PID_PCTV_200E				0x020e
diff --git a/linux/drivers/media/dvb/dvb-usb/dvb-usb-remote.c b/linux/drivers/media/dvb/dvb-usb/dvb-usb-remote.c
index 1a86adbfa..1bee5dfad 100644
--- a/linux/drivers/media/dvb/dvb-usb/dvb-usb-remote.c
+++ b/linux/drivers/media/dvb/dvb-usb/dvb-usb-remote.c
@@ -125,6 +125,9 @@ int dvb_usb_remote_init(struct dvb_usb_device *d)
 	input_dev->keycodemax = KEY_MAX;
 	input_dev->name = "IR-receiver inside an USB DVB receiver";
 	input_dev->phys = d->rc_phys;
+	input_dev->id.bustype = BUS_USB;
+	input_dev->id.vendor = d->udev->descriptor.idVendor;
+	input_dev->id.product = d->udev->descriptor.idProduct;
 	usb_to_input_id(d->udev, &input_dev->id);
 #if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,15)
 	input_dev->cdev.dev = &d->udev->dev;
diff --git a/linux/drivers/media/dvb/dvb-usb/m920x.c b/linux/drivers/media/dvb/dvb-usb/m920x.c
new file mode 100644
index 000000000..1a411316f
--- /dev/null
+++ b/linux/drivers/media/dvb/dvb-usb/m920x.c
@@ -0,0 +1,551 @@
+/* DVB USB compliant linux driver for MSI Mega Sky 580 DVB-T USB2.0 receiver
+ *
+ * Copyright (C) 2006 Aapo Tahkola (aet@rasterburn.org)
+ *
+ *	This program is free software; you can redistribute it and/or modify it
+ *	under the terms of the GNU General Public License as published by the Free
+ *	Software Foundation, version 2.
+ *
+ * see Documentation/dvb/README.dvb-usb for more information
+ */
+
+#include "m920x.h"
+
+#include "mt352.h"
+#include "mt352_priv.h"
+#include "qt1010.h"
+
+/* debug */
+static int dvb_usb_m920x_debug;
+module_param_named(debug,dvb_usb_m920x_debug, int, 0644);
+MODULE_PARM_DESC(debug, "set debugging level (1=rc (or-able))." DVB_USB_DEBUG_STATUS);
+
+static struct dvb_usb_rc_key megasky_rc_keys [] = {
+	{ 0x0, 0x12, KEY_POWER },
+	{ 0x0, 0x1e, KEY_CYCLEWINDOWS }, /* min/max */
+	{ 0x0, 0x02, KEY_CHANNELUP },
+	{ 0x0, 0x05, KEY_CHANNELDOWN },
+	{ 0x0, 0x03, KEY_VOLUMEUP },
+	{ 0x0, 0x06, KEY_VOLUMEDOWN },
+	{ 0x0, 0x04, KEY_MUTE },
+	{ 0x0, 0x07, KEY_OK }, /* TS */
+	{ 0x0, 0x08, KEY_STOP },
+	{ 0x0, 0x09, KEY_MENU }, /* swap */
+	{ 0x0, 0x0a, KEY_REWIND },
+	{ 0x0, 0x1b, KEY_PAUSE },
+	{ 0x0, 0x1f, KEY_FASTFORWARD },
+	{ 0x0, 0x0c, KEY_RECORD },
+	{ 0x0, 0x0d, KEY_CAMERA }, /* screenshot */
+	{ 0x0, 0x0e, KEY_COFFEE }, /* "MTS" */
+};
+
+static inline int m9206_read(struct usb_device *udev, u8 request, u16 value,\
+			     u16 index, void *data, int size)
+{
+	int ret;
+
+	ret = usb_control_msg(udev, usb_rcvctrlpipe(udev, 0),
+			      request, USB_TYPE_VENDOR | USB_DIR_IN,
+			      value, index, data, size, 2000);
+	if (ret < 0)
+		return ret;
+
+	if (ret != size)
+		return -EIO;
+
+	return 0;
+}
+
+static inline int m9206_write(struct usb_device *udev, u8 request,
+			      u16 value, u16 index)
+{
+	int ret;
+
+	ret = usb_control_msg(udev, usb_sndctrlpipe(udev, 0),
+			      request, USB_TYPE_VENDOR | USB_DIR_OUT,
+			      value, index, NULL, 0, 2000);
+	return ret;
+}
+
+static int m9206_rc_init(struct usb_device *udev)
+{
+	int ret = 0;
+
+	/* Remote controller init. */
+	if ((ret = m9206_write(udev, M9206_CORE, 0xa8, M9206_RC_INIT2)) != 0)
+		return ret;
+
+	if ((ret = m9206_write(udev, M9206_CORE, 0x51, M9206_RC_INIT1)) != 0)
+		return ret;
+
+	return ret;
+}
+
+static int m9206_rc_query(struct dvb_usb_device *d, u32 *event, int *state)
+{
+	struct m9206_state *m = d->priv;
+	int i, ret = 0;
+	u8 rc_state[2];
+
+#if 0
+	if (mutex_lock_interruptible(&d->i2c_mutex) < 0)
+		return -EAGAIN;
+#endif
+
+	if ((ret = m9206_read(d->udev, M9206_CORE, 0x0, M9206_RC_STATE, rc_state, 1)) != 0)
+		goto unlock;
+
+	if ((ret = m9206_read(d->udev, M9206_CORE, 0x0, M9206_RC_KEY, rc_state + 1, 1)) != 0)
+		goto unlock;
+
+	for (i = 0; i < ARRAY_SIZE(megasky_rc_keys); i++)
+		if (megasky_rc_keys[i].data == rc_state[1]) {
+			*event = megasky_rc_keys[i].event;
+
+			switch(rc_state[0]) {
+			case 0x80:
+				*state = REMOTE_NO_KEY_PRESSED;
+				goto unlock;
+
+			case 0x93:
+			case 0x92:
+				m->rep_count = 0;
+				*state = REMOTE_KEY_PRESSED;
+				goto unlock;
+
+			case 0x91:
+				/* For comfort. */
+				if (++m->rep_count > 2)
+					*state = REMOTE_KEY_REPEAT;
+				goto unlock;
+
+			default:
+				deb_rc("Unexpected rc response %x\n", rc_state[0]);
+				*state = REMOTE_NO_KEY_PRESSED;
+				goto unlock;
+			}
+		}
+
+	if (rc_state[1] != 0)
+		deb_rc("Unknown rc key %x\n", rc_state[1]);
+
+	*state = REMOTE_NO_KEY_PRESSED;
+
+	unlock:
+#if 0
+	mutex_unlock(&d->i2c_mutex);
+#endif
+
+	return ret;
+}
+
+/* I2C */
+static int m9206_i2c_xfer(struct i2c_adapter *adap, struct i2c_msg msg[],
+			  int num)
+{
+	struct dvb_usb_device *d = i2c_get_adapdata(adap);
+	struct m9206_state *m = d->priv;
+	int i;
+	int ret = 0;
+
+	if (mutex_lock_interruptible(&d->i2c_mutex) < 0)
+		return -EAGAIN;
+
+	if (num > 2)
+		return -EINVAL;
+
+	for (i = 0; i < num; i++) {
+		if ((ret = m9206_write(d->udev, M9206_I2C, msg[i].addr, 0x80)) != 0)
+			goto unlock;
+
+		if ((ret = m9206_write(d->udev, M9206_I2C, msg[i].buf[0], 0x0)) != 0)
+			goto unlock;
+
+		if (i + 1 < num && msg[i + 1].flags & I2C_M_RD) {
+			int i2c_i;
+
+			for (i2c_i = 0; i2c_i < M9206_I2C_MAX; i2c_i++)
+				if (msg[i].addr == m->i2c_r[i2c_i].addr)
+					break;
+
+			if (i2c_i >= M9206_I2C_MAX) {
+				deb_rc("No magic for i2c addr!\n");
+				ret = -EINVAL;
+				goto unlock;
+			}
+
+			if ((ret = m9206_write(d->udev, M9206_I2C, m->i2c_r[i2c_i].magic, 0x80)) != 0)
+				goto unlock;
+
+			if ((ret = m9206_read(d->udev, M9206_I2C, 0x0, 0x60, msg[i + 1].buf, msg[i + 1].len)) != 0)
+				goto unlock;
+
+			i++;
+		} else {
+			if (msg[i].len != 2)
+				return -EINVAL;
+
+			if ((ret = m9206_write(d->udev, M9206_I2C, msg[i].buf[1], 0x40)) != 0)
+				goto unlock;
+		}
+	}
+	ret = i;
+	unlock:
+	mutex_unlock(&d->i2c_mutex);
+
+	return ret;
+}
+
+static u32 m9206_i2c_func(struct i2c_adapter *adapter)
+{
+	return I2C_FUNC_I2C;
+}
+
+static struct i2c_algorithm m9206_i2c_algo = {
+	.master_xfer   = m9206_i2c_xfer,
+	.functionality = m9206_i2c_func,
+};
+
+
+static int m9206_set_filter(struct dvb_usb_adapter *adap, int type, int idx,
+			    int pid)
+{
+	int ret = 0;
+
+	if (pid >= 0x8000)
+		return -EINVAL;
+
+	pid |= 0x8000;
+
+	if ((ret = m9206_write(adap->dev->udev, M9206_FILTER, pid, (type << 8) | (idx * 4) )) != 0)
+		return ret;
+
+	if ((ret = m9206_write(adap->dev->udev, M9206_FILTER, 0, (type << 8) | (idx * 4) )) != 0)
+		return ret;
+
+	return ret;
+}
+
+static int m9206_update_filters(struct dvb_usb_adapter *adap)
+{
+	struct m9206_state *m = adap->dev->priv;
+	int enabled = m->filtering_enabled;
+	int i, ret = 0, filter = 0;
+
+	for (i = 0; i < M9206_MAX_FILTERS; i++)
+		if (m->filters[i] == 8192)
+			enabled = 0;
+
+	/* Disable all filters */
+	if ((ret = m9206_set_filter(adap, 0x81, 1, enabled)) != 0)
+		return ret;
+
+	for (i = 0; i < M9206_MAX_FILTERS; i++)
+		if ((ret = m9206_set_filter(adap, 0x81, i + 2, 0)) != 0)
+			return ret;
+
+	if ((ret = m9206_set_filter(adap, 0x82, 0, 0x0)) != 0)
+		return ret;
+
+	/* Set */
+	if (enabled) {
+		for (i = 0; i < M9206_MAX_FILTERS; i++) {
+			if (m->filters[i] == 0)
+				continue;
+
+			if ((ret = m9206_set_filter(adap, 0x81, filter + 2, m->filters[i])) != 0)
+				return ret;
+
+			filter++;
+		}
+	}
+
+	if ((ret = m9206_set_filter(adap, 0x82, 0, 0x02f5)) != 0)
+		return ret;
+
+	return ret;
+}
+
+static int m9206_pid_filter_ctrl(struct dvb_usb_adapter *adap, int onoff)
+{
+	struct m9206_state *m = adap->dev->priv;
+
+	m->filtering_enabled = onoff ? 1 : 0;
+
+	return m9206_update_filters(adap);
+}
+
+static int m9206_pid_filter(struct dvb_usb_adapter *adap, int index, u16 pid,
+			    int onoff)
+{
+	struct m9206_state *m = adap->dev->priv;
+
+	m->filters[index] = onoff ? pid : 0;
+
+	return m9206_update_filters(adap);
+}
+
+static int m9206_firmware_download(struct usb_device *udev,
+				   const struct firmware *fw)
+{
+	u16 value, index, size;
+	u8 read[4], *buff;
+	int i, pass, ret = 0;
+
+	buff = kmalloc(65536, GFP_KERNEL);
+
+	if ((ret = m9206_read(udev, M9206_FILTER, 0x0, 0x8000, read, 4)) != 0)
+		goto done;
+	deb_rc("%x %x %x %x\n", read[0], read[1], read[2], read[3]);
+
+	if ((ret = m9206_read(udev, M9206_FW, 0x0, 0x0, read, 1)) != 0)
+		goto done;
+	deb_rc("%x\n", read[0]);
+
+	for (pass = 0; pass < 2; pass++) {
+		for (i = 0; i + (sizeof(u16) * 3) < fw->size;) {
+			value = le16_to_cpu(*(u16 *)(fw->data + i));
+			i += sizeof(u16);
+
+			index = le16_to_cpu(*(u16 *)(fw->data + i));
+			i += sizeof(u16);
+
+			size = le16_to_cpu(*(u16 *)(fw->data + i));
+			i += sizeof(u16);
+
+			if (pass == 1) {
+				/* Will stall if using fw->data ... */
+				memcpy(buff, fw->data + i, size);
+
+				ret = usb_control_msg(udev, usb_sndctrlpipe(udev,0),
+					    M9206_FW,
+					    USB_TYPE_VENDOR | USB_DIR_OUT,
+					    value, index, buff, size, 20);
+				if (ret != size) {
+					deb_rc("error while uploading fw!\n");
+					ret = -EIO;
+					goto done;
+				}
+				msleep(3);
+			}
+			i += size;
+		}
+		if (i != fw->size) {
+			ret = -EINVAL;
+			goto done;
+		}
+	}
+
+	msleep(36);
+
+	/* m9206 will disconnect itself from the bus after this. */
+	(void) m9206_write(udev, M9206_CORE, 0x01, M9206_FW_GO);
+	deb_rc("firmware uploaded!\n");
+
+	done:
+	kfree(buff);
+
+	return ret;
+}
+
+/* Callbacks for DVB USB */
+static int megasky_identify_state(struct usb_device *udev,
+				  struct dvb_usb_device_properties *props,
+				  struct dvb_usb_device_description **desc,
+				  int *cold)
+{
+	struct usb_host_interface *alt;
+
+	alt = usb_altnum_to_altsetting(usb_ifnum_to_if(udev, 0), 1);
+	*cold = (alt == NULL) ? 1 : 0;
+
+	return 0;
+}
+
+static int megasky_mt352_demod_init(struct dvb_frontend *fe)
+{
+	u8 config[] = { CONFIG, 0x3d };
+	u8 clock[] = { CLOCK_CTL, 0x30 };
+	u8 reset[] = { RESET, 0x80 };
+	u8 adc_ctl[] = { ADC_CTL_1, 0x40 };
+	u8 agc[] = { AGC_TARGET, 0x1c, 0x20 };
+	u8 sec_agc[] = { 0x69, 0x00, 0xff, 0xff, 0x40, 0xff, 0x00, 0x40, 0x40 };
+	u8 unk1[] = { 0x93, 0x1a };
+	u8 unk2[] = { 0xb5, 0x7a };
+
+	mt352_write(fe, config, ARRAY_SIZE(config));
+	mt352_write(fe, clock, ARRAY_SIZE(clock));
+	mt352_write(fe, reset, ARRAY_SIZE(reset));
+	mt352_write(fe, adc_ctl, ARRAY_SIZE(adc_ctl));
+	mt352_write(fe, agc, ARRAY_SIZE(agc));
+	mt352_write(fe, sec_agc, ARRAY_SIZE(sec_agc));
+	mt352_write(fe, unk1, ARRAY_SIZE(unk1));
+	mt352_write(fe, unk2, ARRAY_SIZE(unk2));
+
+	deb_rc("Demod init!\n");
+
+	return 0;
+}
+
+static struct mt352_config megasky_mt352_config = {
+	.demod_address = 0x1e,
+	.no_tuner = 1,
+	.demod_init = megasky_mt352_demod_init,
+};
+
+static int megasky_mt352_frontend_attach(struct dvb_usb_adapter *adap)
+{
+	struct m9206_state *m = adap->dev->priv;
+
+	deb_rc("megasky_frontend_attach!\n");
+
+	m->i2c_r[M9206_I2C_DEMOD].addr = megasky_mt352_config.demod_address;
+	m->i2c_r[M9206_I2C_DEMOD].magic = 0x1f;
+
+	if ((adap->fe = dvb_attach(mt352_attach, &megasky_mt352_config, &adap->dev->i2c_adap)) == NULL)
+		return -EIO;
+
+	return 0;
+}
+
+static struct qt1010_config megasky_qt1010_config = {
+	.i2c_address = 0xc4
+};
+
+static int megasky_qt1010_tuner_attach(struct dvb_usb_adapter *adap)
+{
+	struct m9206_state *m = adap->dev->priv;
+
+	m->i2c_r[M9206_I2C_TUNER].addr = megasky_qt1010_config.i2c_address;
+	m->i2c_r[M9206_I2C_TUNER].magic = 0xc5;
+
+	if (dvb_attach(qt1010_attach, adap->fe, &adap->dev->i2c_adap,
+		       &megasky_qt1010_config) == NULL)
+		return -ENODEV;
+
+	return 0;
+}
+
+/* DVB USB Driver stuff */
+static struct dvb_usb_device_properties megasky_properties;
+
+static int m920x_probe(struct usb_interface *intf,
+		       const struct usb_device_id *id)
+{
+	struct dvb_usb_device *d;
+	struct usb_host_interface *alt;
+	int ret;
+
+	if ((ret = dvb_usb_device_init(intf, &megasky_properties, THIS_MODULE, &d)) == 0) {
+		deb_rc("probed!\n");
+
+		alt = usb_altnum_to_altsetting(intf, 1);
+		if (alt == NULL) {
+			deb_rc("not alt found!\n");
+			return -ENODEV;
+		}
+
+		ret = usb_set_interface(d->udev, alt->desc.bInterfaceNumber,
+					alt->desc.bAlternateSetting);
+		if (ret < 0)
+			return ret;
+
+		deb_rc("Changed to alternate setting!\n");
+
+		if ((ret = m9206_rc_init(d->udev)) != 0)
+			return ret;
+	}
+	return ret;
+}
+
+static struct usb_device_id m920x_table [] = {
+		{ USB_DEVICE(USB_VID_MSI, USB_PID_MSI_MEGASKY580) },
+		{ }		/* Terminating entry */
+};
+MODULE_DEVICE_TABLE (usb, m920x_table);
+
+static struct dvb_usb_device_properties megasky_properties = {
+	.caps = DVB_USB_IS_AN_I2C_ADAPTER,
+
+	.usb_ctrl = DEVICE_SPECIFIC,
+	.firmware = "dvb-usb-megasky-02.fw",
+	.download_firmware = m9206_firmware_download,
+
+	.rc_interval      = 100,
+	.rc_key_map       = megasky_rc_keys,
+	.rc_key_map_size  = ARRAY_SIZE(megasky_rc_keys),
+	.rc_query         = m9206_rc_query,
+
+	.size_of_priv     = sizeof(struct m9206_state),
+
+	.identify_state   = megasky_identify_state,
+	.num_adapters = 1,
+	.adapter = {{
+		.caps = DVB_USB_ADAP_HAS_PID_FILTER |
+			DVB_USB_ADAP_PID_FILTER_CAN_BE_TURNED_OFF,
+
+		.pid_filter_count = 8,
+		.pid_filter       = m9206_pid_filter,
+		.pid_filter_ctrl  = m9206_pid_filter_ctrl,
+
+		.frontend_attach  = megasky_mt352_frontend_attach,
+		.tuner_attach     = megasky_qt1010_tuner_attach,
+
+		.stream = {
+			.type = USB_BULK,
+			.count = 8,
+			.endpoint = 0x81,
+			.u = {
+				.bulk = {
+					.buffersize = 512,
+				}
+			}
+		},
+	}},
+	.i2c_algo         = &m9206_i2c_algo,
+
+	.num_device_descs = 1,
+	.devices = {
+		{   "MSI Mega Sky 580 DVB-T USB2.0",
+			{ &m920x_table[0], NULL },
+			{ NULL },
+		},
+	}
+};
+
+static struct usb_driver m920x_driver = {
+#if LINUX_VERSION_CODE <=  KERNEL_VERSION(2,6,15)
+	.owner		= THIS_MODULE,
+#endif
+	.name		= "dvb_usb_m920x",
+	.probe		= m920x_probe,
+	.disconnect	= dvb_usb_device_exit,
+	.id_table	= m920x_table,
+};
+
+/* module stuff */
+static int __init m920x_module_init(void)
+{
+	int ret;
+
+	if ((ret = usb_register(&m920x_driver))) {
+		err("usb_register failed. Error number %d", ret);
+		return ret;
+	}
+
+	return 0;
+}
+
+static void __exit m920x_module_exit(void)
+{
+	/* deregister this driver from the USB subsystem */
+	usb_deregister(&m920x_driver);
+}
+
+module_init (m920x_module_init);
+module_exit (m920x_module_exit);
+
+MODULE_AUTHOR("Aapo Tahkola <aet@rasterburn.org>");
+MODULE_DESCRIPTION("Driver MSI Mega Sky 580 DVB-T USB2.0 / Uli m920x");
+MODULE_VERSION("0.1");
+MODULE_LICENSE("GPL");
diff --git a/linux/drivers/media/dvb/dvb-usb/m920x.h b/linux/drivers/media/dvb/dvb-usb/m920x.h
new file mode 100644
index 000000000..c354196ff
--- /dev/null
+++ b/linux/drivers/media/dvb/dvb-usb/m920x.h
@@ -0,0 +1,35 @@
+#ifndef _DVB_USB_M920X_H_
+#define _DVB_USB_M920X_H_
+
+#define DVB_USB_LOG_PREFIX "m920x"
+#include "dvb-usb.h"
+
+#define deb_rc(args...)   dprintk(dvb_usb_m920x_debug,0x01,args)
+
+#define M9206_CORE	0x22
+#define M9206_RC_STATE	0xff51
+#define M9206_RC_KEY	0xff52
+#define M9206_RC_INIT1	0xff54
+#define M9206_RC_INIT2	0xff55
+#define M9206_FW_GO	0xff69
+
+#define M9206_I2C	0x23
+#define M9206_FILTER	0x25
+#define M9206_FW	0x30
+
+#define M9206_MAX_FILTERS 8
+
+#define M9206_I2C_TUNER	0
+#define M9206_I2C_DEMOD	1
+#define M9206_I2C_MAX	2
+
+struct m9206_state {
+	u16 filters[M9206_MAX_FILTERS];
+	int filtering_enabled;
+	int rep_count;
+	struct {
+		unsigned char addr;
+		unsigned char magic;
+	}i2c_r[M9206_I2C_MAX];
+};
+#endif
diff --git a/linux/drivers/media/dvb/frontends/Kconfig b/linux/drivers/media/dvb/frontends/Kconfig
index af314bb1d..22c2cf2ce 100644
--- a/linux/drivers/media/dvb/frontends/Kconfig
+++ b/linux/drivers/media/dvb/frontends/Kconfig
@@ -290,6 +290,13 @@ config DVB_TDA826X
 	help
 	  A DVB-S silicon tuner module. Say Y when you want to support this tuner.
 
+config DVB_TUNER_QT1010
+	tristate "Quantek QT1010 silicon tuner"
+	depends on DVB_CORE && I2C
+	default m if DVB_FE_CUSTOMISE
+	help
+	  A driver for the silicon tuner QT1010 from Quantek.
+
 config DVB_TUNER_MT2060
 	tristate "Microtune MT2060 silicon IF tuner"
 	depends on I2C
diff --git a/linux/drivers/media/dvb/frontends/Makefile b/linux/drivers/media/dvb/frontends/Makefile
index 3fa6e5d32..a646d9969 100644
--- a/linux/drivers/media/dvb/frontends/Makefile
+++ b/linux/drivers/media/dvb/frontends/Makefile
@@ -38,5 +38,6 @@ obj-$(CONFIG_DVB_ISL6421) += isl6421.o
 obj-$(CONFIG_DVB_TDA10086) += tda10086.o
 obj-$(CONFIG_DVB_TDA826X) += tda826x.o
 obj-$(CONFIG_DVB_TUNER_MT2060) += mt2060.o
+obj-$(CONFIG_DVB_TUNER_QT1010) += qt1010.o
 obj-$(CONFIG_DVB_TUA6100) += tua6100.o
 obj-$(CONFIG_DVB_TUNER_LGH06XF) += lgh06xf.o
diff --git a/linux/drivers/media/dvb/frontends/qt1010.c b/linux/drivers/media/dvb/frontends/qt1010.c
new file mode 100644
index 000000000..60931f83f
--- /dev/null
+++ b/linux/drivers/media/dvb/frontends/qt1010.c
@@ -0,0 +1,455 @@
+/*
+ *  Driver for Quantek QT1010 silicon tuner
+ *
+ *  Copyright (C) 2006 Antti Palosaari <crope@iki.fi>
+ *                     Aapo Tahkola <aet@rasterburn.org>
+ *
+ *  This program is free software; you can redistribute it and/or modify
+ *  it under the terms of the GNU General Public License as published by
+ *  the Free Software Foundation; either version 2 of the License, or
+ *  (at your option) any later version.
+ *
+ *  This program is distributed in the hope that it will be useful,
+ *  but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *  GNU General Public License for more details.
+ *
+ *  You should have received a copy of the GNU General Public License
+ *  along with this program; if not, write to the Free Software
+ *  Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+#include "qt1010.h"
+#include "qt1010_priv.h"
+
+static int debug;
+module_param(debug, int, 0644);
+MODULE_PARM_DESC(debug, "Turn on/off debugging (default:off).");
+
+#define dprintk(args...) do { if (debug) {printk(KERN_DEBUG "QT1010: " args); printk("\n"); }} while (0)
+
+/* read single register */
+static int qt1010_readreg(struct qt1010_priv *priv, u8 reg, u8 *val)
+{
+	struct i2c_msg msg[2] = {
+		{ .addr = priv->cfg->i2c_address, .flags = 0,        .buf = &reg, .len = 1 },
+		{ .addr = priv->cfg->i2c_address, .flags = I2C_M_RD, .buf = val,  .len = 1 },
+	};
+
+	if (i2c_transfer(priv->i2c, msg, 2) != 2) {
+		printk(KERN_WARNING "qt1010 I2C read failed\n");
+		return -EREMOTEIO;
+	}
+	return 0;
+}
+
+/* write single register */
+static int qt1010_writereg(struct qt1010_priv *priv, u8 reg, u8 val)
+{
+	u8 buf[2] = { reg, val };
+	struct i2c_msg msg = {
+		.addr = priv->cfg->i2c_address, .flags = 0, .buf = buf, .len = 2
+	};
+
+	if (i2c_transfer(priv->i2c, &msg, 1) != 1) {
+		printk(KERN_WARNING "qt1010 I2C write failed\n");
+		return -EREMOTEIO;
+	}
+	return 0;
+}
+
+/* dump all registers */
+static void qt1010_dump_regs(struct qt1010_priv *priv)
+{
+	char buf[52], buf2[4];
+	u8 reg, val;
+
+	for (reg = 0; ; reg++) {
+		if (reg % 16 == 0) {
+			if (reg)
+				printk("%s\n", buf);
+			sprintf(buf, "%02x: ", reg);
+		}
+		if (qt1010_readreg(priv, reg, &val) == 0)
+			sprintf(buf2, "%02x ", val);
+		else
+			strcpy(buf2, "-- ");
+		strcat(buf, buf2);
+		if (reg == 0x2f)
+			break;
+	}
+	printk("%s\n", buf);
+}
+
+static int qt1010_set_params(struct dvb_frontend *fe, struct dvb_frontend_parameters *params)
+{
+	struct qt1010_priv *priv;
+	int err;
+	u32 freq, div, mod1, mod2;
+	u8 i, tmpval, reg05;
+	qt1010_i2c_oper_t rd[48] = {
+		{ QT1010_WR, 0x01, 0x80 },
+		{ QT1010_WR, 0x02, 0x3f },
+		{ QT1010_WR, 0x05, 0xff }, /* 02 c write */
+		{ QT1010_WR, 0x06, 0x44 },
+		{ QT1010_WR, 0x07, 0xff }, /* 04 c write */
+		{ QT1010_WR, 0x08, 0x08 },
+		{ QT1010_WR, 0x09, 0xff }, /* 06 c write */
+		{ QT1010_WR, 0x0a, 0xff }, /* 07 c write */
+		{ QT1010_WR, 0x0b, 0xff }, /* 08 c write */
+		{ QT1010_WR, 0x0c, 0xe1 },
+		{ QT1010_WR, 0x1a, 0xff }, /* 10 c write */
+		{ QT1010_WR, 0x1b, 0x00 },
+		{ QT1010_WR, 0x1c, 0x89 },
+		{ QT1010_WR, 0x11, 0xff }, /* 13 c write */
+		{ QT1010_WR, 0x12, 0xff }, /* 14 c write */
+		{ QT1010_WR, 0x22, 0xff }, /* 15 c write */
+		{ QT1010_WR, 0x1e, 0x00 },
+		{ QT1010_WR, 0x1e, 0xd0 },
+		{ QT1010_RD, 0x22, 0xff }, /* 16 c read */
+		{ QT1010_WR, 0x1e, 0x00 },
+		{ QT1010_RD, 0x05, 0xff }, /* 20 c read */
+		{ QT1010_RD, 0x22, 0xff }, /* 21 c read */
+		{ QT1010_WR, 0x23, 0xd0 },
+		{ QT1010_WR, 0x1e, 0x00 },
+		{ QT1010_WR, 0x1e, 0xe0 },
+		{ QT1010_RD, 0x23, 0xff }, /* 25 c read */
+		{ QT1010_RD, 0x23, 0xff }, /* 26 c read */
+		{ QT1010_WR, 0x1e, 0x00 },
+		{ QT1010_WR, 0x24, 0xd0 },
+		{ QT1010_WR, 0x1e, 0x00 },
+		{ QT1010_WR, 0x1e, 0xf0 },
+		{ QT1010_RD, 0x24, 0xff }, /* 31 c read */
+		{ QT1010_WR, 0x1e, 0x00 },
+		{ QT1010_WR, 0x14, 0x7f },
+		{ QT1010_WR, 0x15, 0x7f },
+		{ QT1010_WR, 0x05, 0xff }, /* 35 c write */
+		{ QT1010_WR, 0x06, 0x00 },
+		{ QT1010_WR, 0x15, 0x1f },
+		{ QT1010_WR, 0x16, 0xff },
+		{ QT1010_WR, 0x18, 0xff },
+		{ QT1010_WR, 0x1f, 0xff }, /* 40 c write */
+		{ QT1010_WR, 0x20, 0xff }, /* 41 c write */
+		{ QT1010_WR, 0x21, 0x53 },
+		{ QT1010_WR, 0x25, 0xff }, /* 43 c write */
+		{ QT1010_WR, 0x26, 0x15 },
+		{ QT1010_WR, 0x00, 0xff }, /* 45 c write */
+		{ QT1010_WR, 0x02, 0x00 },
+		{ QT1010_WR, 0x01, 0x00 }
+	};
+
+#define FREQ1 32000000 /* 32 MHz */
+#define FREQ2  4000000 /* 4 MHz Quartz oscillator in the stick? */
+
+	priv = fe->tuner_priv;
+	freq = params->frequency;
+	div = (freq + QT1010_OFFSET) / QT1010_STEP;
+	freq = (div * QT1010_STEP) - QT1010_OFFSET;
+	mod1 = (freq + QT1010_OFFSET) % FREQ1;
+	mod2 = (freq + QT1010_OFFSET) % FREQ2;
+	priv->bandwidth = (fe->ops.info.type == FE_OFDM) ? params->u.ofdm.bandwidth : 0;
+	priv->frequency = freq;
+
+	/* reg 05 base value */
+	if      (freq < 290000000) reg05 = 0x14; /* 290 MHz */
+	else if (freq < 610000000) reg05 = 0x34; /* 610 MHz */
+	else if (freq < 802000000) reg05 = 0x54; /* 802 MHz */
+	else                       reg05 = 0x74;
+
+	/* 0x5 */
+	rd[2].val = reg05;
+
+	/* 07 - set frequency: 32 MHz scale */
+	rd[4].val = (freq + QT1010_OFFSET) / FREQ1;
+
+	/* 09 - changes every 8/24 MHz */
+	if (mod1 < 8000000) rd[6].val = 0x1d;
+	else                rd[6].val = 0x1c;
+
+	/* 0a - set frequency: 4 MHz scale (max 28 MHz) */
+	if      (mod1 < 1*FREQ2) rd[7].val = 0x09; /*  +0 MHz */
+	else if (mod1 < 2*FREQ2) rd[7].val = 0x08; /*  +4 MHz */
+	else if (mod1 < 3*FREQ2) rd[7].val = 0x0f; /*  +8 MHz */
+	else if (mod1 < 4*FREQ2) rd[7].val = 0x0e; /* +12 MHz */
+	else if (mod1 < 5*FREQ2) rd[7].val = 0x0d; /* +16 MHz */
+	else if (mod1 < 6*FREQ2) rd[7].val = 0x0c; /* +20 MHz */
+	else if (mod1 < 7*FREQ2) rd[7].val = 0x0b; /* +24 MHz */
+	else                     rd[7].val = 0x0a; /* +28 MHz */
+
+	/* 0b - changes every 2/2 MHz */
+	if (mod2 < 2000000) rd[8].val = 0x45;
+	else                rd[8].val = 0x44;
+
+	/* 1a - set frequency: 125 kHz scale (max 3875 kHz)*/
+	tmpval = 0x78; /* byte, overflows intentionally */
+	rd[10].val = tmpval-((mod2/QT1010_STEP)*0x08);
+
+	/* 11 */
+	rd[13].val = 0xfd; /* TODO: correct value calculation */
+
+	/* 12 */
+	rd[14].val = 0x91; /* TODO: correct value calculation */
+
+	/* 22 */
+	if      (freq < 450000000) rd[15].val = 0xd0; /* 450 MHz */
+	else if (freq < 482000000) rd[15].val = 0xd1; /* 482 MHz */
+	else if (freq < 514000000) rd[15].val = 0xd4; /* 514 MHz */
+	else if (freq < 546000000) rd[15].val = 0xd7; /* 546 MHz */
+	else if (freq < 610000000) rd[15].val = 0xda; /* 610 MHz */
+	else                       rd[15].val = 0xd0;
+
+	/* 05 */
+	rd[35].val = (reg05 & 0xf0);
+
+	/* 1f */
+	if      (mod1 <  8000000) tmpval = 0x00;
+	else if (mod1 < 12000000) tmpval = 0x01;
+	else if (mod1 < 16000000) tmpval = 0x02;
+	else if (mod1 < 24000000) tmpval = 0x03;
+	else if (mod1 < 28000000) tmpval = 0x04;
+	else                      tmpval = 0x05;
+	rd[40].val = (priv->reg1f_init_val + 0x0e + tmpval);
+
+	/* 20 */
+	if      (mod1 <  8000000) tmpval = 0x00;
+	else if (mod1 < 12000000) tmpval = 0x01;
+	else if (mod1 < 20000000) tmpval = 0x02;
+	else if (mod1 < 24000000) tmpval = 0x03;
+	else if (mod1 < 28000000) tmpval = 0x04;
+	else                      tmpval = 0x05;
+	rd[41].val = (priv->reg20_init_val + 0x0d + tmpval);
+
+	/* 25 */
+	rd[43].val = priv->reg25_init_val;
+
+	/* 00 */
+	rd[45].val = 0x92; /* TODO: correct value calculation */
+
+	dprintk("freq:%u 05:%02x 07:%02x 09:%02x 0a:%02x 0b:%02x 1a:%02x 11:%02x " \
+		"12:%02x 22:%02x 05:%02x 1f:%02x 20:%02x 25:%02x 00:%02x", \
+		freq, rd[2].val, rd[4].val, rd[6].val, rd[7].val, rd[8].val, \
+		rd[10].val, rd[13].val, rd[14].val, rd[15].val, rd[35].val, \
+		rd[40].val, rd[41].val, rd[43].val, rd[45].val);
+
+	for (i = 0; i < sizeof(rd) / sizeof(*rd); i++) {
+		if (rd[i].oper == QT1010_WR) {
+			err = qt1010_writereg(priv, rd[i].reg, rd[i].val);
+		} else { /* read is required to proper locking */
+			err = qt1010_readreg(priv, rd[i].reg, &tmpval);
+		}
+		if (err) return err;
+	}
+
+	if (debug)
+		qt1010_dump_regs(priv);
+
+	return 0;
+}
+
+static int qt1010_init_meas1(struct qt1010_priv *priv, u8 oper, u8 reg, u8 reg_init_val, u8 *retval)
+{
+	u8 i, val1, val2;
+	int err;
+
+	qt1010_i2c_oper_t i2c_data[] = {
+		{ QT1010_WR, reg, reg_init_val },
+		{ QT1010_WR, 0x1e, 0x00 },
+		{ QT1010_WR, 0x1e, oper },
+		{ QT1010_RD, reg, 0xff }
+	};
+
+	for (i = 0; i < sizeof(i2c_data) / sizeof(*i2c_data); i++) {
+		if (i2c_data[i].oper == QT1010_WR) {
+			err = qt1010_writereg(priv, i2c_data[i].reg, i2c_data[i].val);
+		} else {
+			err = qt1010_readreg(priv, i2c_data[i].reg, &val2);
+		}
+		if (err) return err;
+	}
+
+	do {
+		val1 = val2;
+		err = qt1010_readreg(priv, reg, &val2);
+		if (err) return err;
+		dprintk("compare reg:%02x %02x %02x", reg, val1, val2);
+	} while (val1 != val2);
+	*retval = val1;
+
+	return qt1010_writereg(priv, 0x1e, 0x00);
+}
+
+
+static u8 qt1010_init_meas2(struct qt1010_priv *priv, u8 reg_init_val, u8 *retval)
+{
+	u8 i, val;
+	int err;
+	qt1010_i2c_oper_t i2c_data[] = {
+		{ QT1010_WR, 0x07, reg_init_val },
+		{ QT1010_WR, 0x22, 0xd0 },
+		{ QT1010_WR, 0x1e, 0x00 },
+		{ QT1010_WR, 0x1e, 0xd0 },
+		{ QT1010_RD, 0x22, 0xff },
+		{ QT1010_WR, 0x1e, 0x00 },
+		{ QT1010_WR, 0x22, 0xff }
+	};
+	for (i = 0; i < sizeof(i2c_data) / sizeof(*i2c_data); i++) {
+		if (i2c_data[i].oper == QT1010_WR) {
+			err = qt1010_writereg(priv, i2c_data[i].reg, i2c_data[i].val);
+		} else {
+			err = qt1010_readreg(priv, i2c_data[i].reg, &val);
+		}
+		if (err) return err;
+	}
+	*retval = val;
+	return 0;
+}
+
+static int qt1010_init(struct dvb_frontend *fe)
+{
+	struct qt1010_priv *priv = fe->tuner_priv;
+	struct dvb_frontend_parameters params;
+	int err;
+	u8 i, tmpval, *valptr = NULL;
+
+	qt1010_i2c_oper_t i2c_data[] = {
+		{ QT1010_WR, 0x01, 0x80 },
+		{ QT1010_WR, 0x0d, 0x84 },
+		{ QT1010_WR, 0x0e, 0xb7 },
+		{ QT1010_WR, 0x2a, 0x23 },
+		{ QT1010_WR, 0x2c, 0xdc },
+		{ QT1010_M1, 0x25, 0x40 }, /* get reg 25 init value */
+		{ QT1010_M1, 0x81, 0xff }, /* get reg 25 init value */
+		{ QT1010_WR, 0x2b, 0x70 },
+		{ QT1010_WR, 0x2a, 0x23 },
+		{ QT1010_M1, 0x26, 0x08 },
+		{ QT1010_M1, 0x82, 0xff },
+		{ QT1010_WR, 0x05, 0x14 },
+		{ QT1010_WR, 0x06, 0x44 },
+		{ QT1010_WR, 0x07, 0x28 },
+		{ QT1010_WR, 0x08, 0x0b },
+		{ QT1010_WR, 0x11, 0xfd },
+		{ QT1010_M1, 0x22, 0x0d },
+		{ QT1010_M1, 0xd0, 0xff },
+		{ QT1010_WR, 0x06, 0x40 },
+		{ QT1010_WR, 0x16, 0xf0 },
+		{ QT1010_WR, 0x02, 0x38 },
+		{ QT1010_WR, 0x03, 0x18 },
+		{ QT1010_WR, 0x20, 0xe0 },
+		{ QT1010_M1, 0x1f, 0x20 }, /* get reg 1f init value */
+		{ QT1010_M1, 0x84, 0xff }, /* get reg 1f init value */
+		{ QT1010_RD, 0x20, 0x20 }, /* get reg 20 init value */
+		{ QT1010_WR, 0x03, 0x19 },
+		{ QT1010_WR, 0x02, 0x3f },
+		{ QT1010_WR, 0x21, 0x53 },
+		{ QT1010_RD, 0x21, 0xff },
+		{ QT1010_WR, 0x11, 0xfd },
+		{ QT1010_WR, 0x05, 0x34 },
+		{ QT1010_WR, 0x06, 0x44 },
+		{ QT1010_WR, 0x08, 0x08 }
+	};
+
+	for (i = 0; i < sizeof(i2c_data) / sizeof(*i2c_data); i++) {
+		switch (i2c_data[i].oper) {
+		case QT1010_WR:
+			err = qt1010_writereg(priv, i2c_data[i].reg, i2c_data[i].val);
+			break;
+		case QT1010_RD:
+			if (i2c_data[i].val == 0x20) valptr = &priv->reg20_init_val;
+			else valptr = &tmpval;
+			err = qt1010_readreg(priv, i2c_data[i].reg, valptr);
+			break;
+		case QT1010_M1:
+			if (i2c_data[i].val == 0x25) valptr = &priv->reg25_init_val;
+			else if (i2c_data[i].val == 0x1f) valptr = &priv->reg1f_init_val;
+			else valptr = &tmpval;
+			err = qt1010_init_meas1(priv, i2c_data[i+1].reg, i2c_data[i].reg,
+						      i2c_data[i].val, valptr);
+			i++;
+			break;
+		}
+		if (err) return err;
+	}
+
+	for (i = 0x31; i < 0x3a; i++) /* 0x31 - 0x39 */
+		if ((err = qt1010_init_meas2(priv, i, &tmpval)))
+			return err;
+
+	params.frequency = 545000000; /* Sigmatek DVB-110 545000000 */
+				      /* MSI Megasky 580 GL861 533000000 */
+	return qt1010_set_params(fe, &params);
+}
+
+static int qt1010_release(struct dvb_frontend *fe)
+{
+	kfree(fe->tuner_priv);
+	fe->tuner_priv = NULL;
+	return 0;
+}
+
+static int qt1010_get_frequency(struct dvb_frontend *fe, u32 *frequency)
+{
+	struct qt1010_priv *priv = fe->tuner_priv;
+	*frequency = priv->frequency;
+	return 0;
+}
+
+static int qt1010_get_bandwidth(struct dvb_frontend *fe, u32 *bandwidth)
+{
+	struct qt1010_priv *priv = fe->tuner_priv;
+	*bandwidth = priv->bandwidth;
+	return 0;
+}
+
+static const struct dvb_tuner_ops qt1010_tuner_ops = {
+	.info = {
+		.name           = "Quantek QT1010",
+		.frequency_min  = QT1010_MIN_FREQ,
+		.frequency_max  = QT1010_MAX_FREQ,
+		.frequency_step = QT1010_STEP,
+	},
+
+	.release       = qt1010_release,
+	.init          = qt1010_init,
+	/* TODO: implement sleep */
+
+	.set_params    = qt1010_set_params,
+	.get_frequency = qt1010_get_frequency,
+	.get_bandwidth = qt1010_get_bandwidth
+};
+
+struct dvb_frontend * qt1010_attach(struct dvb_frontend *fe,
+				    struct i2c_adapter *i2c,
+				    struct qt1010_config *cfg)
+{
+	struct qt1010_priv *priv = NULL;
+	u8 id;
+
+	priv = kzalloc(sizeof(struct qt1010_priv), GFP_KERNEL);
+	if (priv == NULL)
+		return NULL;
+
+	priv->cfg      = cfg;
+	priv->i2c      = i2c;
+
+#if 0
+	qt1010_dump_regs(priv);
+#endif
+
+	/* Try to detect tuner chip. Probably this is not correct register. */
+	if (qt1010_readreg(priv, 0x29, &id) != 0 || (id != 0x39)) {
+		kfree(priv);
+		return NULL;
+	}
+
+	printk(KERN_INFO "Quantek QT1010 successfully identified.\n");
+	memcpy(&fe->ops.tuner_ops, &qt1010_tuner_ops, sizeof(struct dvb_tuner_ops));
+
+	fe->tuner_priv = priv;
+	return fe;
+}
+EXPORT_SYMBOL(qt1010_attach);
+
+MODULE_DESCRIPTION("Quantek QT1010 silicon tuner driver");
+MODULE_AUTHOR("Antti Palosaari <crope@iki.fi>");
+MODULE_AUTHOR("Aapo Tahkola <aet@rasterburn.org>");
+MODULE_VERSION("0.1");
+MODULE_LICENSE("GPL");
diff --git a/linux/drivers/media/dvb/frontends/qt1010.h b/linux/drivers/media/dvb/frontends/qt1010.h
new file mode 100644
index 000000000..3ab4aa045
--- /dev/null
+++ b/linux/drivers/media/dvb/frontends/qt1010.h
@@ -0,0 +1,53 @@
+/*
+ *  Driver for Quantek QT1010 silicon tuner
+ *
+ *  Copyright (C) 2006 Antti Palosaari <crope@iki.fi>
+ *                     Aapo Tahkola <aet@rasterburn.org>
+ *
+ *  This program is free software; you can redistribute it and/or modify
+ *  it under the terms of the GNU General Public License as published by
+ *  the Free Software Foundation; either version 2 of the License, or
+ *  (at your option) any later version.
+ *
+ *  This program is distributed in the hope that it will be useful,
+ *  but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *  GNU General Public License for more details.
+ *
+ *  You should have received a copy of the GNU General Public License
+ *  along with this program; if not, write to the Free Software
+ *  Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+
+#ifndef QT1010_H
+#define QT1010_H
+
+#include "dvb_frontend.h"
+
+struct qt1010_config {
+	u8 i2c_address;
+};
+
+/**
+ * Attach a qt1010 tuner to the supplied frontend structure.
+ *
+ * @param fe   frontend to attach to
+ * @param i2c  i2c adapter to use
+ * @param cfg  tuner hw based configuration
+ * @return fe  pointer on success, NULL on failure
+ */
+#if defined(CONFIG_DVB_TUNER_QT1010) || (defined(CONFIG_DVB_TUNER_QT1010_MODULE) && defined(MODULE))
+extern struct dvb_frontend *qt1010_attach(struct dvb_frontend *fe,
+					  struct i2c_adapter *i2c,
+					  struct qt1010_config *cfg);
+#else
+static inline struct dvb_frontend *qt1010_attach(struct dvb_frontend *fe,
+						 struct i2c_adapter *i2c,
+						 struct qt1010_config *cfg)
+{
+	printk(KERN_WARNING "%s: driver disabled by Kconfig\n", __FUNCTION__);
+	return NULL;
+}
+#endif // CONFIG_DVB_TUNER_QT1010
+
+#endif
diff --git a/linux/drivers/media/dvb/frontends/qt1010_priv.h b/linux/drivers/media/dvb/frontends/qt1010_priv.h
new file mode 100644
index 000000000..090cf475f
--- /dev/null
+++ b/linux/drivers/media/dvb/frontends/qt1010_priv.h
@@ -0,0 +1,105 @@
+/*
+ *  Driver for Quantek QT1010 silicon tuner
+ *
+ *  Copyright (C) 2006 Antti Palosaari <crope@iki.fi>
+ *                     Aapo Tahkola <aet@rasterburn.org>
+ *
+ *  This program is free software; you can redistribute it and/or modify
+ *  it under the terms of the GNU General Public License as published by
+ *  the Free Software Foundation; either version 2 of the License, or
+ *  (at your option) any later version.
+ *
+ *  This program is distributed in the hope that it will be useful,
+ *  but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *  GNU General Public License for more details.
+ *
+ *  You should have received a copy of the GNU General Public License
+ *  along with this program; if not, write to the Free Software
+ *  Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+
+#ifndef QT1010_PRIV_H
+#define QT1010_PRIV_H
+
+/*
+reg def meaning
+=== === =======
+00  00  ?
+01  a0  ? operation start/stop; start=80, stop=00
+02  00  ?
+03  19  ?
+04  00  ?
+05  00  ? maybe band selection
+06  00  ?
+07  2b  set frequency: 32 MHz scale, n*32 MHz
+08  0b  ?
+09  10  ? changes every 8/24 MHz; values 1d/1c
+0a  08  set frequency: 4 MHz scale, n*4 MHz
+0b  41  ? changes every 2/2 MHz; values 45/45
+0c  e1  ?
+0d  94  ?
+0e  b6  ?
+0f  2c  ?
+10  10  ?
+11  f1  ? maybe device specified adjustment
+12  11  ? maybe device specified adjustment
+13  3f  ?
+14  1f  ?
+15  3f  ?
+16  ff  ?
+17  ff  ?
+18  f7  ?
+19  80  ?
+1a  d0  set frequency: 125 kHz scale, n*125 kHz
+1b  00  ?
+1c  89  ?
+1d  00  ?
+1e  00  ? looks like operation register; write cmd here, read result from 1f-26
+1f  20  ? chip initialization
+20  e0  ? chip initialization
+21  20  ?
+22  d0  ?
+23  d0  ?
+24  d0  ?
+25  40  ? chip initialization
+26  08  ?
+27  29  ?
+28  55  ?
+29  39  ?
+2a  13  ?
+2b  01  ?
+2c  ea  ?
+2d  00  ?
+2e  00  ? not used?
+2f  00  ? not used?
+*/
+
+#define QT1010_STEP         125000 /*  125 kHz used by Windows drivers,
+				      hw could be more precise but we don't
+				      know how to use */
+#define QT1010_MIN_FREQ   48000000 /*   48 MHz */
+#define QT1010_MAX_FREQ  860000000 /*  860 MHz */
+#define QT1010_OFFSET   1246000000 /* 1246 MHz */
+
+#define QT1010_WR 0
+#define QT1010_RD 1
+#define QT1010_M1 3
+
+typedef struct {
+	u8 oper, reg, val;
+} qt1010_i2c_oper_t;
+
+struct qt1010_priv {
+	struct qt1010_config *cfg;
+	struct i2c_adapter   *i2c;
+
+	u8 reg1f_init_val;
+	u8 reg20_init_val;
+	u8 reg25_init_val;
+
+	u32 frequency;
+	u32 bandwidth;
+};
+
+#endif
diff --git a/linux/drivers/media/video/cx88/cx88-cards.c b/linux/drivers/media/video/cx88/cx88-cards.c
index 9a5aa0803..3a7131342 100644
--- a/linux/drivers/media/video/cx88/cx88-cards.c
+++ b/linux/drivers/media/video/cx88/cx88-cards.c
@@ -765,6 +765,12 @@ struct cx88_board cx88_boards[] = {
 		.input          = {{
 			.type   = CX88_VMUX_DVB,
 			.vmux   = 0,
+		},{
+			.type   = CX88_VMUX_COMPOSITE1,
+			.vmux   = 2,
+		},{
+			.type   = CX88_VMUX_SVIDEO,
+			.vmux   = 2,
 		}},
 		.mpeg           = CX88_MPEG_DVB,
 	},
diff --git a/linux/drivers/media/video/pvrusb2/pvrusb2-encoder.c b/linux/drivers/media/video/pvrusb2/pvrusb2-encoder.c
index b9ee07638..95e45be08 100644
--- a/linux/drivers/media/video/pvrusb2/pvrusb2-encoder.c
+++ b/linux/drivers/media/video/pvrusb2/pvrusb2-encoder.c
@@ -196,8 +196,8 @@ static int pvr2_encoder_cmd(void *ctxt,
 			PVR2_TRACE_ERROR_LEGS,
 			"Failed to write cx23416 command"
 			" - too many input arguments"
-			" (was given %u limit %u)",
-			arg_cnt_send, ARRAY_SIZE(wrData) - 4);
+			" (was given %u limit %lu)",
+			arg_cnt_send, (long unsigned) ARRAY_SIZE(wrData) - 4);
 		return -EINVAL;
 	}
 
@@ -206,8 +206,8 @@ static int pvr2_encoder_cmd(void *ctxt,
 			PVR2_TRACE_ERROR_LEGS,
 			"Failed to write cx23416 command"
 			" - too many return arguments"
-			" (was given %u limit %u)",
-			arg_cnt_recv, ARRAY_SIZE(rdData) - 4);
+			" (was given %u limit %lu)",
+			arg_cnt_recv, (long unsigned) ARRAY_SIZE(rdData) - 4);
 		return -EINVAL;
 	}
 
@@ -304,8 +304,8 @@ static int pvr2_encoder_vcmd(struct pvr2_hdw *hdw, int cmd,
 			PVR2_TRACE_ERROR_LEGS,
 			"Failed to write cx23416 command"
 			" - too many arguments"
-			" (was given %u limit %u)",
-			args, ARRAY_SIZE(data));
+			" (was given %u limit %lu)",
+			args, (long unsigned) ARRAY_SIZE(data));
 		return -EINVAL;
 	}
 
diff --git a/linux/drivers/media/video/pvrusb2/pvrusb2-v4l2.c b/linux/drivers/media/video/pvrusb2/pvrusb2-v4l2.c
index 13dc436f6..621a0dd31 100644
--- a/linux/drivers/media/video/pvrusb2/pvrusb2-v4l2.c
+++ b/linux/drivers/media/video/pvrusb2/pvrusb2-v4l2.c
@@ -366,6 +366,10 @@ static int pvr2_v4l2_do_ioctl(struct inode *inode, struct file *file,
 	case VIDIOC_G_TUNER:
 	{
 		struct v4l2_tuner *vt = (struct v4l2_tuner *)arg;
+
+		if (vt->index != 0)
+			break;
+
 		pvr2_hdw_execute_tuner_poll(hdw);
 		ret = pvr2_hdw_get_tuner_status(hdw,vt);
 		break;
diff --git a/linux/drivers/media/video/saa7115.c b/linux/drivers/media/video/saa7115.c
index 6b99a4624..462c5dd7f 100644
--- a/linux/drivers/media/video/saa7115.c
+++ b/linux/drivers/media/video/saa7115.c
@@ -82,6 +82,7 @@ I2C_CLIENT_INSMOD;
 struct saa711x_state {
 	v4l2_std_id std;
 	int input;
+	int output;
 	int enable;
 	int radio;
 	int bright;
@@ -1312,7 +1313,7 @@ static int saa711x_command(struct i2c_client *client, unsigned int cmd, void *ar
 		struct v4l2_routing *route = arg;
 
 		route->input = state->input;
-		route->output = 0;
+		route->output = state->output;
 		break;
 	}
 
@@ -1320,7 +1321,7 @@ static int saa711x_command(struct i2c_client *client, unsigned int cmd, void *ar
 	{
 		struct v4l2_routing *route = arg;
 
-		v4l_dbg(1, debug, client, "decoder set input %d\n", route->input);
+		v4l_dbg(1, debug, client, "decoder set input %d output %d\n", route->input, route->output);
 		/* saa7113 does not have these inputs */
 		if (state->ident == V4L2_IDENT_SAA7113 &&
 		    (route->input == SAA7115_COMPOSITE4 ||
@@ -1329,10 +1330,12 @@ static int saa711x_command(struct i2c_client *client, unsigned int cmd, void *ar
 		}
 		if (route->input > SAA7115_SVIDEO3)
 			return -EINVAL;
-		if (state->input == route->input)
+		if (route->output > SAA7115_IPORT_ON)
+			return -EINVAL;
+		if (state->input == route->input && state->output == route->output)
 			break;
-		v4l_dbg(1, debug, client, "now setting %s input\n",
-			(route->input >= SAA7115_SVIDEO0) ? "S-Video" : "Composite");
+		v4l_dbg(1, debug, client, "now setting %s input %s output\n",
+			(route->input >= SAA7115_SVIDEO0) ? "S-Video" : "Composite", (route->output == SAA7115_IPORT_ON) ? "iport on" : "iport off");
 		state->input = route->input;
 
 		/* select mode */
@@ -1344,6 +1347,14 @@ static int saa711x_command(struct i2c_client *client, unsigned int cmd, void *ar
 		saa711x_write(client, R_09_LUMA_CNTL,
 			      (saa711x_read(client, R_09_LUMA_CNTL) & 0x7f) |
 			       (state->input >= SAA7115_SVIDEO0 ? 0x80 : 0x0));
+
+		state->output = route->output;
+		if (state->ident == V4L2_IDENT_SAA7114 ||
+			state->ident == V4L2_IDENT_SAA7115) {
+			saa711x_write(client, R_83_X_PORT_I_O_ENA_AND_OUT_CLK,
+			      (saa711x_read(client, R_83_X_PORT_I_O_ENA_AND_OUT_CLK) & 0xfe) |
+			       (state->output & 0x01));
+		}
 		break;
 	}
 
@@ -1511,6 +1522,7 @@ static int saa711x_attach(struct i2c_adapter *adapter, int address, int kind)
 		return -ENOMEM;
 	}
 	state->input = -1;
+	state->output = SAA7115_IPORT_ON;
 	state->enable = 1;
 	state->radio = 0;
 	state->bright = 128;
@@ -1573,7 +1585,7 @@ static int saa711x_attach(struct i2c_adapter *adapter, int address, int kind)
 static int saa711x_probe(struct i2c_adapter *adapter)
 {
 #ifdef I2C_CLASS_TV_ANALOG
-	if (adapter->class & I2C_CLASS_TV_ANALOG)
+	if (adapter->class & I2C_CLASS_TV_ANALOG || adapter->class & I2C_CLASS_TV_DIGITAL)
 #else
 	if (adapter->id == I2C_HW_B_BT848)
 #endif
diff --git a/linux/drivers/media/video/video-buf.c b/linux/drivers/media/video/video-buf.c
index 6d6a74c60..4e359bc33 100644
--- a/linux/drivers/media/video/video-buf.c
+++ b/linux/drivers/media/video/video-buf.c
@@ -706,6 +706,7 @@ videobuf_qbuf(struct videobuf_queue *q,
 		goto done;
 	}
 	if (buf->state == STATE_QUEUED ||
+	    buf->state == STATE_PREPARED ||
 	    buf->state == STATE_ACTIVE) {
 		dprintk(1,"qbuf: buffer is already queued or active.\n");
 		goto done;
diff --git a/linux/include/media/saa7115.h b/linux/include/media/saa7115.h
index 9f0e2285a..f677dfb9d 100644
--- a/linux/include/media/saa7115.h
+++ b/linux/include/media/saa7115.h
@@ -42,5 +42,8 @@
 #define SAA7115_FREQ_FL_CGCDIV (1 << 1)	   /* SA 3A[6], CGCDIV, SAA7115 only */
 #define SAA7115_FREQ_FL_APLL   (1 << 2)	   /* SA 3A[3], APLL, SAA7114/5 only */
 
+#define SAA7115_IPORT_ON    1
+#define SAA7115_IPORT_OFF   0
+
 #endif