merge: http://linuxtv.org/hg/~awalls/v4l-dvb

From: Mauro Carvalho Chehab <mchehab@redhat.com>

commit && make && hg push

Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

12 files changed, 48 insertions, 47 deletions

diff --git a/linux/drivers/media/common/saa7146_i2c.c b/linux/drivers/media/common/saa7146_i2c.c
index 68674799b..fa9d4f90a 100644
--- a/linux/drivers/media/common/saa7146_i2c.c
+++ b/linux/drivers/media/common/saa7146_i2c.c
@@ -294,7 +294,6 @@ static int saa7146_i2c_transfer(struct saa7146_dev *dev, const struct i2c_msg *m
 	int i = 0, count = 0;
 	__le32 *buffer = dev->d_i2c.cpu_addr;
 	int err = 0;
-	int address_err = 0;
 	int short_delay = 0;
 
 	if (mutex_lock_interruptible(&dev->i2c_lock))
@@ -334,17 +333,10 @@ static int saa7146_i2c_transfer(struct saa7146_dev *dev, const struct i2c_msg *m
 				   i2c address probing, however, and address errors indicate that a
 				   device is really *not* there. retrying in that case
 				   increases the time the device needs to probe greatly, so
-				   it should be avoided. because of the fact, that only
-				   analog based cards use irq based i2c transactions (for dvb
-				   cards, this screwes up other interrupt sources), we bail out
-				   completely for analog cards after an address error and trust
-				   the saa7146 address error detection. */
-				if ( -EREMOTEIO == err ) {
-					if( 0 != (SAA7146_USE_I2C_IRQ & dev->ext->flags)) {
-						goto out;
-					}
-					address_err++;
-				}
+				   it should be avoided. So we bail out in irq mode after an
+				   address error and trust the saa7146 address error detection. */
+				if (-EREMOTEIO == err && 0 != (SAA7146_USE_I2C_IRQ & dev->ext->flags))
+					goto out;
 				DEB_I2C(("error while sending message(s). starting again.\n"));
 				break;
 			}
@@ -359,10 +351,9 @@ static int saa7146_i2c_transfer(struct saa7146_dev *dev, const struct i2c_msg *m
 
 	} while (err != num && retries--);
 
-	/* if every retry had an address error, exit right away */
-	if (address_err == retries) {
+	/* quit if any error occurred */
+	if (err != num)
 		goto out;
-	}
 
 	/* if any things had to be read, get the results */
 	if ( 0 != saa7146_i2c_msg_cleanup(msgs, num, buffer)) {
diff --git a/linux/drivers/media/dvb/dvb-usb/Kconfig b/linux/drivers/media/dvb/dvb-usb/Kconfig
index bbddc9fb6..3763a9c68 100644
--- a/linux/drivers/media/dvb/dvb-usb/Kconfig
+++ b/linux/drivers/media/dvb/dvb-usb/Kconfig
@@ -96,6 +96,7 @@ config DVB_USB_UMT_010
 	select DVB_PLL if !DVB_FE_CUSTOMISE
 	select DVB_DIB3000MC
 	select MEDIA_TUNER_MT2060 if !MEDIA_TUNER_CUSTOMIZE
+	select DVB_MT352 if !DVB_FE_CUSTOMISE
 	help
 	  Say Y here to support the HanfTek UMT-010 USB2.0 stick-sized DVB-T receiver.
 
@@ -108,6 +109,7 @@ config DVB_USB_CXUSB
 	select DVB_MT352 if !DVB_FE_CUSTOMISE
 	select DVB_ZL10353 if !DVB_FE_CUSTOMISE
 	select DVB_DIB7000P if !DVB_FE_CUSTOMISE
+	select DVB_LGS8GL5 if !DVB_FE_CUSTOMISE
 	select DVB_TUNER_DIB0070 if !DVB_FE_CUSTOMISE
 	select MEDIA_TUNER_SIMPLE if !MEDIA_TUNER_CUSTOMIZE
 	select MEDIA_TUNER_XC2028 if !MEDIA_TUNER_CUSTOMIZE
diff --git a/linux/drivers/media/dvb/frontends/Kconfig b/linux/drivers/media/dvb/frontends/Kconfig
index 4059d22a1..3205e302d 100644
--- a/linux/drivers/media/dvb/frontends/Kconfig
+++ b/linux/drivers/media/dvb/frontends/Kconfig
@@ -1,17 +1,21 @@
-menu "Customise DVB Frontends"
-	depends on DVB_CORE
-
 config DVB_FE_CUSTOMISE
 	bool "Customise the frontend modules to build"
+	depends on DVB_CORE
 	default N
 	help
-	  This allows the user to deselect frontend drivers unnecessary
-	  for their hardware from the build. Use this option with care
-	  as deselecting frontends which are in fact necessary will result
-	  in DVB devices which cannot be tuned due to lack of driver support.
+	  This allows the user to select/deselect frontend drivers for their 
+	  hardware from the build.
+
+	  Use this option with care as deselecting frontends which are in fact
+	  necessary will result in DVB devices which cannot be tuned due to lack
+	  of driver support.
 
 	  If unsure say N.
 
+if DVB_FE_CUSTOMISE
+
+menu "Customise DVB Frontends" 
+
 comment "Multistandard (satellite) frontends"
 	depends on DVB_CORE
 
@@ -507,3 +511,5 @@ config DVB_AF9013
 	help
 	  Say Y when you want to support this frontend.
 endmenu
+
+endif
diff --git a/linux/drivers/media/dvb/frontends/stv0900_core.c b/linux/drivers/media/dvb/frontends/stv0900_core.c
index c86c3017e..9ff9744a1 100644
--- a/linux/drivers/media/dvb/frontends/stv0900_core.c
+++ b/linux/drivers/media/dvb/frontends/stv0900_core.c
@@ -34,8 +34,8 @@
 #include "stv0900_priv.h"
 #include "stv0900_init.h"
 
-int debug = 1;
-module_param(debug, int, 0644);
+static int stvdebug = 1;
+module_param_named(debug, stvdebug, int, 0644);
 
 /* internal params node */
 struct stv0900_inode {
diff --git a/linux/drivers/media/dvb/frontends/stv0900_priv.h b/linux/drivers/media/dvb/frontends/stv0900_priv.h
index 28350fbeb..762d5af62 100644
--- a/linux/drivers/media/dvb/frontends/stv0900_priv.h
+++ b/linux/drivers/media/dvb/frontends/stv0900_priv.h
@@ -62,11 +62,11 @@
 
 #define dmd_choose(a, b)	(demod = STV0900_DEMOD_2 ? b : a))
 
-extern int debug;
+static int stvdebug;
 
 #define dprintk(args...) \
 	do { \
-		if (debug) \
+		if (stvdebug) \
 			printk(KERN_DEBUG args); \
 	} while (0)
 
diff --git a/linux/drivers/media/video/au0828/Kconfig b/linux/drivers/media/video/au0828/Kconfig
index 018f72b8e..deb00e4ac 100644
--- a/linux/drivers/media/video/au0828/Kconfig
+++ b/linux/drivers/media/video/au0828/Kconfig
@@ -4,10 +4,10 @@ config VIDEO_AU0828
 	depends on I2C && INPUT && DVB_CORE && USB
 	select I2C_ALGOBIT
 	select VIDEO_TVEEPROM
-	select DVB_AU8522 if !DVB_FE_CUSTOMIZE
-	select MEDIA_TUNER_XC5000 if !DVB_FE_CUSTOMIZE
-	select MEDIA_TUNER_MXL5007T if !DVB_FE_CUSTOMIZE
-	select MEDIA_TUNER_TDA18271 if !DVB_FE_CUSTOMIZE
+	select DVB_AU8522 if !DVB_FE_CUSTOMISE
+	select MEDIA_TUNER_XC5000 if !DVB_FE_CUSTOMISE
+	select MEDIA_TUNER_MXL5007T if !DVB_FE_CUSTOMISE
+	select MEDIA_TUNER_TDA18271 if !DVB_FE_CUSTOMISE
 	---help---
 	  This is a video4linux driver for Auvitek's USB device.
 
diff --git a/linux/drivers/media/video/cx23885/Kconfig b/linux/drivers/media/video/cx23885/Kconfig
index b62f16d50..28896aa31 100644
--- a/linux/drivers/media/video/cx23885/Kconfig
+++ b/linux/drivers/media/video/cx23885/Kconfig
@@ -15,13 +15,15 @@ config VIDEO_CX23885
 	select DVB_S5H1411 if !DVB_FE_CUSTOMISE
 	select DVB_LGDT330X if !DVB_FE_CUSTOMISE
 	select DVB_ZL10353 if !DVB_FE_CUSTOMISE
-	select DVB_TDA10048 if !DVB_FE_CUSTOMIZE
-	select DVB_LNBP21 if !DVB_FE_CUSTOMIZE
+	select DVB_TDA10048 if !DVB_FE_CUSTOMISE
+	select DVB_LNBP21 if !DVB_FE_CUSTOMISE
+	select DVB_STV6110 if !DVB_FE_CUSTOMISE
+	select DVB_STV0900 if !DVB_FE_CUSTOMISE
 	select MEDIA_TUNER_MT2131 if !MEDIA_TUNER_CUSTOMIZE
-	select MEDIA_TUNER_XC2028 if !DVB_FE_CUSTOMIZE
-	select MEDIA_TUNER_TDA8290 if !DVB_FE_CUSTOMIZE
-	select MEDIA_TUNER_TDA18271 if !DVB_FE_CUSTOMIZE
-	select MEDIA_TUNER_XC5000 if !DVB_FE_CUSTOMIZE
+	select MEDIA_TUNER_XC2028 if !DVB_FE_CUSTOMISE
+	select MEDIA_TUNER_TDA8290 if !DVB_FE_CUSTOMISE
+	select MEDIA_TUNER_TDA18271 if !DVB_FE_CUSTOMISE
+	select MEDIA_TUNER_XC5000 if !DVB_FE_CUSTOMISE
 	---help---
 	  This is a video4linux driver for Conexant 23885 based
 	  TV cards.
diff --git a/linux/drivers/media/video/em28xx/em28xx-dvb.c b/linux/drivers/media/video/em28xx/em28xx-dvb.c
index c76dbc029..edafe9bde 100644
--- a/linux/drivers/media/video/em28xx/em28xx-dvb.c
+++ b/linux/drivers/media/video/em28xx/em28xx-dvb.c
@@ -30,9 +30,6 @@
 #include "lgdt330x.h"
 #include "zl10353.h"
 #include "s5h1409.h"
-#ifdef EM28XX_DRX397XD_SUPPORT
-#include "drx397xD.h"
-#endif
 
 MODULE_DESCRIPTION("driver for em28xx based DVB cards");
 MODULE_AUTHOR("Mauro Carvalho Chehab <mchehab@infradead.org>");
diff --git a/linux/drivers/media/video/pvrusb2/Kconfig b/linux/drivers/media/video/pvrusb2/Kconfig
index 854c2a885..bb4271393 100644
--- a/linux/drivers/media/video/pvrusb2/Kconfig
+++ b/linux/drivers/media/video/pvrusb2/Kconfig
@@ -40,10 +40,10 @@ config VIDEO_PVRUSB2_DVB
 	select DVB_LGDT330X if !DVB_FE_CUSTOMISE
 	select DVB_S5H1409 if !DVB_FE_CUSTOMISE
 	select DVB_S5H1411 if !DVB_FE_CUSTOMISE
-	select DVB_TDA10048 if !DVB_FE_CUSTOMIZE
-	select MEDIA_TUNER_TDA18271 if !DVB_FE_CUSTOMIZE
+	select DVB_TDA10048 if !DVB_FE_CUSTOMISE
+	select MEDIA_TUNER_TDA18271 if !DVB_FE_CUSTOMISE
 	select MEDIA_TUNER_SIMPLE if !MEDIA_TUNER_CUSTOMIZE
-	select MEDIA_TUNER_TDA8290 if !DVB_FE_CUSTOMIZE
+	select MEDIA_TUNER_TDA8290 if !DVB_FE_CUSTOMISE
 	---help---
 
 	  This option enables a DVB interface for the pvrusb2 driver.
diff --git a/linux/drivers/media/video/saa7134/Kconfig b/linux/drivers/media/video/saa7134/Kconfig
index a3470ebad..51f17c82b 100644
--- a/linux/drivers/media/video/saa7134/Kconfig
+++ b/linux/drivers/media/video/saa7134/Kconfig
@@ -35,10 +35,13 @@ config VIDEO_SAA7134_DVB
 	select DVB_TDA10086 if !DVB_FE_CUSTOMISE
 	select DVB_TDA826X if !DVB_FE_CUSTOMISE
 	select DVB_ISL6421 if !DVB_FE_CUSTOMISE
+	select DVB_ISL6405 if !DVB_FE_CUSTOMISE
 	select MEDIA_TUNER_TDA827X if !MEDIA_TUNER_CUSTOMIZE
 	select MEDIA_TUNER_SIMPLE if !MEDIA_TUNER_CUSTOMIZE
 	select DVB_ZL10036 if !DVB_FE_CUSTOMISE
 	select DVB_MT312 if !DVB_FE_CUSTOMISE
+	select DVB_LNBP21 if !DVB_FE_CUSTOMISE
+	select DVB_ZL10353 if !DVB_FE_CUSTOMISE
 	---help---
 	  This adds support for DVB cards based on the
 	  Philips saa7134 chip.
diff --git a/linux/drivers/media/video/zoran/Kconfig b/linux/drivers/media/video/zoran/Kconfig
index 925fb5159..fd4120e4c 100644
--- a/linux/drivers/media/video/zoran/Kconfig
+++ b/linux/drivers/media/video/zoran/Kconfig
@@ -68,6 +68,7 @@ config VIDEO_ZORAN_AVS6EYES
 	tristate "AverMedia 6 Eyes support (EXPERIMENTAL)"
 	depends on VIDEO_ZORAN_ZR36060 && EXPERIMENTAL
 	select VIDEO_BT856 if VIDEO_HELPER_CHIPS_AUTO
+	select VIDEO_BT866 if VIDEO_HELPER_CHIPS_AUTO
 	select VIDEO_KS0127 if VIDEO_HELPER_CHIPS_AUTO
 	help
 	  Support for the AverMedia 6 Eyes video surveillance card.
diff --git a/linux/drivers/media/video/zoran/zoran_driver.c b/linux/drivers/media/video/zoran/zoran_driver.c
index 8eda83b06..1560c1e4c 100644
--- a/linux/drivers/media/video/zoran/zoran_driver.c
+++ b/linux/drivers/media/video/zoran/zoran_driver.c
@@ -1378,11 +1378,10 @@ setup_overlay (struct file *file,
 
 	/* get the status of a buffer in the clients buffer queue */
 static int
-zoran_v4l2_buffer_status (struct file        *file,
+zoran_v4l2_buffer_status (struct zoran_fh    *fh,
 			  struct v4l2_buffer *buf,
 			  int                 num)
 {
-	struct zoran_fh *fh = file->private_data;
 	struct zoran *zr = fh->zr;
 
 	buf->flags = V4L2_BUF_FLAG_MAPPED;
@@ -2502,7 +2501,7 @@ static int zoran_querybuf(struct file *file, void *__fh, struct v4l2_buffer *buf
 	int res;
 
 	mutex_lock(&zr->resource_lock);
-	res = zoran_v4l2_buffer_status(file, buf, buf->index);
+	res = zoran_v4l2_buffer_status(fh, buf, buf->index);
 	mutex_unlock(&zr->resource_lock);
 
 	return res;
@@ -2603,7 +2602,7 @@ static int zoran_dqbuf(struct file *file, void *__fh, struct v4l2_buffer *buf)
 		if (res)
 			goto dqbuf_unlock_and_return;
 		zr->v4l_sync_tail++;
-		res = zoran_v4l2_buffer_status(file, buf, num);
+		res = zoran_v4l2_buffer_status(fh, buf, num);
 		break;
 
 	case ZORAN_MAP_MODE_JPG_REC:
@@ -2634,7 +2633,7 @@ static int zoran_dqbuf(struct file *file, void *__fh, struct v4l2_buffer *buf)
 		res = jpg_sync(file, &bs);
 		if (res)
 			goto dqbuf_unlock_and_return;
-		res = zoran_v4l2_buffer_status(file, buf, bs.frame);
+		res = zoran_v4l2_buffer_status(fh, buf, bs.frame);
 		break;
 	}