merge: http://www.linuxtv.org/hg/~dougsland/em28xx

From: Mauro Carvalho Chehab <mchehab@redhat.com>

Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

47 files changed, 1213 insertions, 480 deletions

diff --git a/linux/Documentation/dvb/get_dvb_firmware b/linux/Documentation/dvb/get_dvb_firmware
index 815a57840..a52adfc9a 100755
--- a/linux/Documentation/dvb/get_dvb_firmware
+++ b/linux/Documentation/dvb/get_dvb_firmware
@@ -317,7 +317,7 @@ sub nxt2002 {
 
 sub nxt2004 {
     my $sourcefile = "AVerTVHD_MCE_A180_Drv_v1.2.2.16.zip";
-    my $url = "http://www.aver.com/support/Drivers/$sourcefile";
+    my $url = "http://www.avermedia-usa.com/support/Drivers/$sourcefile";
     my $hash = "111cb885b1e009188346d72acfed024c";
     my $outfile = "dvb-fe-nxt2004.fw";
     my $tmpdir = tempdir(DIR => "/tmp", CLEANUP => 1);
diff --git a/linux/Documentation/video4linux/CARDLIST.tuner b/linux/Documentation/video4linux/CARDLIST.tuner
index 22c1c5597..be6784407 100644
--- a/linux/Documentation/video4linux/CARDLIST.tuner
+++ b/linux/Documentation/video4linux/CARDLIST.tuner
@@ -77,3 +77,4 @@ tuner=76 - Xceive 5000 tuner
 tuner=77 - TCL tuner MF02GIP-5N-E
 tuner=78 - Philips FMD1216MEX MK3 Hybrid Tuner
 tuner=79 - Philips PAL/SECAM multi (FM1216 MK5)
+tuner=80 - Philips FQ1216LME MK3 PAL/SECAM w/active loopthrough
diff --git a/linux/Documentation/video4linux/gspca.txt b/linux/Documentation/video4linux/gspca.txt
index 1bb103fe9..2bcf78896 100644
--- a/linux/Documentation/video4linux/gspca.txt
+++ b/linux/Documentation/video4linux/gspca.txt
@@ -163,10 +163,11 @@ sunplus		055f:c650	Mustek MDC5500Z
 zc3xx		055f:d003	Mustek WCam300A
 zc3xx		055f:d004	Mustek WCam300 AN
 conex		0572:0041	Creative Notebook cx11646
-ov519		05a9:0519	OmniVision
+ov519		05a9:0519	OV519 Microphone
 ov519		05a9:0530	OmniVision
-ov519		05a9:4519	OmniVision
+ov519		05a9:4519	Webcam Classic
 ov519		05a9:8519	OmniVision
+ov519		05a9:a518	D-Link DSB-C310 Webcam
 sunplus		05da:1018	Digital Dream Enigma 1.3
 stk014		05e1:0893	Syntek DV4000
 spca561		060b:a001	Maxell Compact Pc PM3
diff --git a/linux/drivers/media/common/tuners/tuner-simple.c b/linux/drivers/media/common/tuners/tuner-simple.c
index 233476df9..2ac1c8edb 100644
--- a/linux/drivers/media/common/tuners/tuner-simple.c
+++ b/linux/drivers/media/common/tuners/tuner-simple.c
@@ -423,6 +423,24 @@ static int simple_std_setup(struct dvb_frontend *fe,
 	return 0;
 }
 
+static int simple_set_aux_byte(struct dvb_frontend *fe, u8 config, u8 aux)
+{
+	struct tuner_simple_priv *priv = fe->tuner_priv;
+	int rc;
+	u8 buffer[2];
+
+	buffer[0] = (config & ~0x38) | 0x18;
+	buffer[1] = aux;
+
+	tuner_dbg("setting aux byte: 0x%02x 0x%02x\n", buffer[0], buffer[1]);
+
+	rc = tuner_i2c_xfer_send(&priv->i2c_props, buffer, 2);
+	if (2 != rc)
+		tuner_warn("i2c i/o error: rc == %d (should be 2)\n", rc);
+
+	return rc == 2 ? 0 : rc;
+}
+
 static int simple_post_tune(struct dvb_frontend *fe, u8 *buffer,
 			    u16 div, u8 config, u8 cb)
 {
@@ -431,30 +449,10 @@ static int simple_post_tune(struct dvb_frontend *fe, u8 *buffer,
 
 	switch (priv->type) {
 	case TUNER_LG_TDVS_H06XF:
-		/* Set the Auxiliary Byte. */
-#if 0
-		buffer[2] &= ~0x20;
-		buffer[2] |= 0x18;
-		buffer[3] = 0x20;
-		tuner_dbg("tv 0x%02x 0x%02x 0x%02x 0x%02x\n",
-			  buffer[0], buffer[1], buffer[2], buffer[3]);
-
-		rc = tuner_i2c_xfer_send(&priv->i2c_props, buffer, 4);
-		if (4 != rc)
-			tuner_warn("i2c i/o error: rc == %d "
-				   "(should be 4)\n", rc);
-#else
-		buffer[0] = buffer[2];
-		buffer[0] &= ~0x20;
-		buffer[0] |= 0x18;
-		buffer[1] = 0x20;
-		tuner_dbg("tv 0x%02x 0x%02x\n", buffer[0], buffer[1]);
-
-		rc = tuner_i2c_xfer_send(&priv->i2c_props, buffer, 2);
-		if (2 != rc)
-			tuner_warn("i2c i/o error: rc == %d "
-				   "(should be 2)\n", rc);
-#endif
+		simple_set_aux_byte(fe, config, 0x20);
+		break;
+	case TUNER_PHILIPS_FQ1216LME_MK3:
+		simple_set_aux_byte(fe, config, 0x60); /* External AGC */
 		break;
 	case TUNER_MICROTUNE_4042FI5:
 	{
@@ -526,6 +524,11 @@ static int simple_radio_bandswitch(struct dvb_frontend *fe, u8 *buffer)
 	case TUNER_THOMSON_DTT761X:
 		buffer[3] = 0x39;
 		break;
+	case TUNER_PHILIPS_FQ1216LME_MK3:
+		tuner_err("This tuner doesn't have FM\n");
+		/* Set the low band for sanity, since it covers 88-108 MHz */
+		buffer[3] = 0x01;
+		break;
 	case TUNER_MICROTUNE_4049FM5:
 	default:
 		buffer[3] = 0xa4;
@@ -698,12 +701,12 @@ static int simple_set_radio_freq(struct dvb_frontend *fe,
 		return 0;
 	}
 
-	/* Bandswitch byte */
-	simple_radio_bandswitch(fe, &buffer[0]);
-
 	buffer[2] = (t_params->ranges[0].config & ~TUNER_RATIO_MASK) |
 		    TUNER_RATIO_SELECT_50; /* 50 kHz step */
 
+	/* Bandswitch byte */
+	simple_radio_bandswitch(fe, &buffer[0]);
+
 	/* Convert from 1/16 kHz V4L steps to 1/20 MHz (=50 kHz) PLL steps
 	   freq * (1 Mhz / 16000 V4L steps) * (20 PLL steps / 1 MHz) =
 	   freq * (1/800) */
diff --git a/linux/drivers/media/common/tuners/tuner-types.c b/linux/drivers/media/common/tuners/tuner-types.c
index 43afd30b0..e57d7cb2f 100644
--- a/linux/drivers/media/common/tuners/tuner-types.c
+++ b/linux/drivers/media/common/tuners/tuner-types.c
@@ -1280,6 +1280,28 @@ static struct tuner_params tuner_tcl_mf02gip_5n_params[] = {
 	},
 };
 
+/* 80-89 */
+/* --------- TUNER_PHILIPS_FQ1216LME_MK3 -- active loopthrough, no FM ------- */
+
+static struct tuner_params tuner_fq1216lme_mk3_params[] = {
+	{
+		.type   = TUNER_PARAM_TYPE_PAL,
+		.ranges = tuner_fm1216me_mk3_pal_ranges,
+		.count  = ARRAY_SIZE(tuner_fm1216me_mk3_pal_ranges),
+		.cb_first_if_lower_freq = 1, /* not specified, but safe to do */
+		.has_tda9887 = 1, /* TDA9886 */
+		.port1_active = 1,
+		.port2_active = 1,
+		.port2_invert_for_secam_lc = 1,
+		.default_top_low = 4,
+		.default_top_mid = 4,
+		.default_top_high = 4,
+		.default_top_secam_low = 4,
+		.default_top_secam_mid = 4,
+		.default_top_secam_high = 4,
+	},
+};
+
 /* --------------------------------------------------------------------- */
 
 struct tunertype tuners[] = {
@@ -1725,6 +1747,13 @@ struct tunertype tuners[] = {
 		.params = tuner_fm1216mk5_params,
 		.count  = ARRAY_SIZE(tuner_fm1216mk5_params),
 	},
+
+	/* 80-89 */
+	[TUNER_PHILIPS_FQ1216LME_MK3] = { /* PAL/SECAM, Loop-thru, no FM */
+		.name = "Philips FQ1216LME MK3 PAL/SECAM w/active loopthrough",
+		.params = tuner_fq1216lme_mk3_params,
+		.count  = ARRAY_SIZE(tuner_fq1216lme_mk3_params),
+	},
 };
 EXPORT_SYMBOL(tuners);
 
diff --git a/linux/drivers/media/dvb/b2c2/flexcop-fe-tuner.c b/linux/drivers/media/dvb/b2c2/flexcop-fe-tuner.c
index 3f485bf13..efb4a6c2b 100644
--- a/linux/drivers/media/dvb/b2c2/flexcop-fe-tuner.c
+++ b/linux/drivers/media/dvb/b2c2/flexcop-fe-tuner.c
@@ -175,23 +175,23 @@ static int skystar23_samsung_tbdu18132_tuner_set_params(struct dvb_frontend *fe,
 	return 0;
 }
 
-static void skystar2_rev23_attach(struct flexcop_device *fc,
+static int skystar2_rev23_attach(struct flexcop_device *fc,
 	struct i2c_adapter *i2c)
 {
-	fc->fe = dvb_attach(mt312_attach,
-			&skystar23_samsung_tbdu18132_config, i2c);
+	fc->fe = dvb_attach(mt312_attach, &skystar23_samsung_tbdu18132_config, i2c);
 	if (fc->fe != NULL) {
 		struct dvb_frontend_ops *ops = &fc->fe->ops;
-		ops->tuner_ops.set_params \
-			= skystar23_samsung_tbdu18132_tuner_set_params;
+		ops->tuner_ops.set_params   =
+			skystar23_samsung_tbdu18132_tuner_set_params;
 		ops->diseqc_send_master_cmd = flexcop_diseqc_send_master_cmd;
 		ops->diseqc_send_burst      = flexcop_diseqc_send_burst;
 		ops->set_tone               = flexcop_set_tone;
 		ops->set_voltage            = flexcop_set_voltage;
 		fc->fe_sleep                = ops->sleep;
 		ops->sleep                  = flexcop_sleep;
-		fc->dev_type                = FC_SKY_REV23;
+		return 1;
 	}
+	return 0;
 }
 #endif
 
@@ -307,7 +307,7 @@ static struct stv0299_config samsung_tbmu24112_config = {
 	.set_symbol_rate = samsung_tbmu24112_set_symbol_rate,
 };
 
-static void skystar2_rev26_attach(struct flexcop_device *fc,
+static int skystar2_rev26_attach(struct flexcop_device *fc,
 	struct i2c_adapter *i2c)
 {
 	fc->fe = dvb_attach(stv0299_attach, &samsung_tbmu24112_config, i2c);
@@ -317,7 +317,9 @@ static void skystar2_rev26_attach(struct flexcop_device *fc,
 		ops->set_voltage = flexcop_set_voltage;
 		fc->fe_sleep = ops->sleep;
 		ops->sleep = flexcop_sleep;
+		return 1;
 	}
+	return 0;
 }
 #endif
 
@@ -334,43 +336,54 @@ static struct itd1000_config skystar2_rev2_7_itd1000_config = {
 	.i2c_address = 0x61,
 };
 
-static void skystar2_rev27_attach(struct flexcop_device *fc,
+static int skystar2_rev27_attach(struct flexcop_device *fc,
 	struct i2c_adapter *i2c)
 {
+	flexcop_ibi_value r108;
+	struct i2c_adapter *i2c_tuner;
+
 	/* enable no_base_addr - no repeated start when reading */
 	fc->fc_i2c_adap[0].no_base_addr = 1;
-	fc->fe = dvb_attach(s5h1420_attach,
-		&skystar2_rev2_7_s5h1420_config, i2c);
-	if (fc->fe != NULL) {
-		flexcop_ibi_value r108;
-		struct i2c_adapter *i2c_tuner \
-		= s5h1420_get_tuner_i2c_adapter(fc->fe);
-		struct dvb_frontend_ops *ops = &fc->fe->ops;
+	fc->fe = dvb_attach(s5h1420_attach, &skystar2_rev2_7_s5h1420_config,
+			    i2c);
+	if (!fc->fe)
+		goto fail;
 
-		fc->fe_sleep = ops->sleep;
-		ops->sleep   = flexcop_sleep;
-
-		/* enable no_base_addr - no repeated start when reading */
-		fc->fc_i2c_adap[2].no_base_addr = 1;
-		if (dvb_attach(isl6421_attach, fc->fe,
-			&fc->fc_i2c_adap[2].i2c_adap, 0x08, 1, 1) == NULL)
-			err("ISL6421 could NOT be attached");
-		else
-			info("ISL6421 successfully attached");
-
-		/* the ITD1000 requires a lower i2c clock - is it a problem ? */
-		r108.raw = 0x00000506;
-		fc->write_ibi_reg(fc, tw_sm_c_108, r108);
-		if (i2c_tuner) {
-			if (dvb_attach(itd1000_attach, fc->fe, i2c_tuner,
-				&skystar2_rev2_7_itd1000_config) == NULL)
-				err("ITD1000 could NOT be attached");
-			else
-				info("ITD1000 successfully attached");
-		}
-	} else
-		fc->fc_i2c_adap[0].no_base_addr = 0;
-		/* for the next devices we need it again */
+	i2c_tuner = s5h1420_get_tuner_i2c_adapter(fc->fe);
+	if (!i2c_tuner)
+		goto fail;
+
+	fc->fe_sleep = fc->fe->ops.sleep;
+	fc->fe->ops.sleep = flexcop_sleep;
+
+	/* enable no_base_addr - no repeated start when reading */
+	fc->fc_i2c_adap[2].no_base_addr = 1;
+	if (!dvb_attach(isl6421_attach, fc->fe, &fc->fc_i2c_adap[2].i2c_adap,
+			0x08, 1, 1)) {
+		err("ISL6421 could NOT be attached");
+		goto fail_isl;
+	}
+	info("ISL6421 successfully attached");
+
+	/* the ITD1000 requires a lower i2c clock - is it a problem ? */
+	r108.raw = 0x00000506;
+	fc->write_ibi_reg(fc, tw_sm_c_108, r108);
+	if (!dvb_attach(itd1000_attach, fc->fe, i2c_tuner,
+			&skystar2_rev2_7_itd1000_config)) {
+		err("ITD1000 could NOT be attached");
+		/* Should i2c clock be restored? */
+		goto fail_isl;
+	}
+	info("ITD1000 successfully attached");
+
+	return 1;
+
+fail_isl:
+	fc->fc_i2c_adap[2].no_base_addr = 0;
+fail:
+	/* for the next devices we need it again */
+	fc->fc_i2c_adap[0].no_base_addr = 0;
+	return 0;
 }
 #endif
 
@@ -387,32 +400,38 @@ static const struct cx24113_config skystar2_rev2_8_cx24113_config = {
 	.xtal_khz = 10111,
 };
 
-static void skystar2_rev28_attach(struct flexcop_device *fc,
+static int skystar2_rev28_attach(struct flexcop_device *fc,
 	struct i2c_adapter *i2c)
 {
-	fc->fe = dvb_attach(cx24123_attach,
-			&skystar2_rev2_8_cx24123_config, i2c);
-	if (fc->fe != NULL) {
-		struct i2c_adapter *i2c_tuner \
-			= cx24123_get_tuner_i2c_adapter(fc->fe);
-		if (i2c_tuner != NULL) {
-			if (dvb_attach(cx24113_attach, fc->fe,
-						&skystar2_rev2_8_cx24113_config,
-						i2c_tuner) == NULL)
-				err("CX24113 could NOT be attached");
-			else
-				info("CX24113 successfully attached");
-		}
+	struct i2c_adapter *i2c_tuner;
+
+	fc->fe = dvb_attach(cx24123_attach, &skystar2_rev2_8_cx24123_config,
+			    i2c);
+	if (!fc->fe)
+		return 0;
+
+	i2c_tuner = cx24123_get_tuner_i2c_adapter(fc->fe);;
+	if (!i2c_tuner)
+		return 0;
 
-		fc->fc_i2c_adap[2].no_base_addr = 1;
-		if (dvb_attach(isl6421_attach, fc->fe,
-			&fc->fc_i2c_adap[2].i2c_adap, 0x08, 0, 0) == NULL)
-			err("ISL6421 could NOT be attached");
-		else
-			info("ISL6421 successfully attached");
+	if (!dvb_attach(cx24113_attach, fc->fe, &skystar2_rev2_8_cx24113_config,
+			i2c_tuner)) {
+		err("CX24113 could NOT be attached");
+		return 0;
+	}
+	info("CX24113 successfully attached");
+
+	fc->fc_i2c_adap[2].no_base_addr = 1;
+	if (!dvb_attach(isl6421_attach, fc->fe, &fc->fc_i2c_adap[2].i2c_adap,
+			0x08, 0, 0)) {
+		err("ISL6421 could NOT be attached");
+		fc->fc_i2c_adap[2].no_base_addr = 0;
+		return 0;
+	}
+	info("ISL6421 successfully attached");
 	/* TODO on i2c_adap[1] addr 0x11 (EEPROM) there seems to be an
 	 * IR-receiver (PIC16F818) - but the card has no input for that ??? */
-	}
+	return 1;
 }
 #endif
 
@@ -466,12 +485,15 @@ static struct mt352_config samsung_tdtc9251dh0_config = {
 	.demod_init    = samsung_tdtc9251dh0_demod_init,
 };
 
-static void airstar_dvbt_attach(struct flexcop_device *fc,
+static int airstar_dvbt_attach(struct flexcop_device *fc,
 	struct i2c_adapter *i2c)
 {
 	fc->fe = dvb_attach(mt352_attach, &samsung_tdtc9251dh0_config, i2c);
-	if (fc->fe != NULL)
+	if (fc->fe != NULL) {
 		fc->fe->ops.tuner_ops.calc_regs = samsung_tdtc9251dh0_calc_regs;
+		return 1;
+	}
+	return 0;
 }
 #endif
 
@@ -489,10 +511,11 @@ static struct bcm3510_config air2pc_atsc_first_gen_config = {
 	.request_firmware = flexcop_fe_request_firmware,
 };
 
-static void airstar_atsc1_attach(struct flexcop_device *fc,
+static int airstar_atsc1_attach(struct flexcop_device *fc,
 	struct i2c_adapter *i2c)
 {
 	fc->fe = dvb_attach(bcm3510_attach, &air2pc_atsc_first_gen_config, i2c);
+	return fc->fe != NULL;
 }
 #endif
 
@@ -502,13 +525,15 @@ static struct nxt200x_config samsung_tbmv_config = {
 	.demod_address = 0x0a,
 };
 
-static void airstar_atsc2_attach(struct flexcop_device *fc,
+static int airstar_atsc2_attach(struct flexcop_device *fc,
 	struct i2c_adapter *i2c)
 {
 	fc->fe = dvb_attach(nxt200x_attach, &samsung_tbmv_config, i2c);
-	if (fc->fe != NULL)
-		dvb_attach(dvb_pll_attach, fc->fe, 0x61, NULL,
-				DVB_PLL_SAMSUNG_TBMV);
+	if (!fc->fe)
+		return 0;
+
+	return !!dvb_attach(dvb_pll_attach, fc->fe, 0x61, NULL,
+			    DVB_PLL_SAMSUNG_TBMV);
 }
 #endif
 
@@ -521,14 +546,15 @@ static struct lgdt330x_config air2pc_atsc_hd5000_config = {
 	.clock_polarity_flip = 1,
 };
 
-static void airstar_atsc3_attach(struct flexcop_device *fc,
+static int airstar_atsc3_attach(struct flexcop_device *fc,
 	struct i2c_adapter *i2c)
 {
 	fc->fe = dvb_attach(lgdt330x_attach, &air2pc_atsc_hd5000_config, i2c);
-	if (fc->fe != NULL) {
-		dvb_attach(simple_tuner_attach, fc->fe, i2c, 0x61,
-				TUNER_LG_TDVS_H06XF);
-	}
+	if (!fc->fe)
+		return 0;
+
+	return !!dvb_attach(simple_tuner_attach, fc->fe, i2c, 0x61,
+			    TUNER_LG_TDVS_H06XF);
 }
 #endif
 
@@ -659,22 +685,24 @@ static struct stv0297_config alps_tdee4_stv0297_config = {
 	.inittab = alps_tdee4_stv0297_inittab,
 };
 
-static void cablestar2_attach(struct flexcop_device *fc,
+static int cablestar2_attach(struct flexcop_device *fc,
 	struct i2c_adapter *i2c)
 {
 	fc->fc_i2c_adap[0].no_base_addr = 1;
 	fc->fe = dvb_attach(stv0297_attach, &alps_tdee4_stv0297_config, i2c);
-	if (fc->fe != NULL)
-		fc->fe->ops.tuner_ops.set_params \
-		= alps_tdee4_stv0297_tuner_set_params;
-	else
+	if (!fc->fe) {
+		/* Reset for next frontend to try */
 		fc->fc_i2c_adap[0].no_base_addr = 0;
+		return 0;
+	}
+	fc->fe->ops.tuner_ops.set_params = alps_tdee4_stv0297_tuner_set_params;
+	return 1;
 }
 #endif
 
 static struct {
 	flexcop_device_type_t type;
-	void (*attach)(struct flexcop_device *, struct i2c_adapter *);
+	int (*attach)(struct flexcop_device *, struct i2c_adapter *);
 } flexcop_frontends[] = {
 #if defined(CONFIG_DVB_S5H1420_MODULE)
 	{ FC_SKY_REV27, skystar2_rev27_attach },
@@ -713,9 +741,13 @@ int flexcop_frontend_init(struct flexcop_device *fc)
 		/* type needs to be set before, because of some workarounds
 		 * done based on the probed card type */
 		fc->dev_type = flexcop_frontends[i].type;
-		flexcop_frontends[i].attach(fc, &fc->fc_i2c_adap[0].i2c_adap);
-		if (fc->fe != NULL)
+		if (flexcop_frontends[i].attach(fc, &fc->fc_i2c_adap[0].i2c_adap))
 			goto fe_found;
+		/* Clean up partially attached frontend */
+		if (fc->fe) {
+			dvb_frontend_detach(fc->fe);
+			fc->fe = NULL;
+		}
 	}
 	fc->dev_type = FC_UNK;
 	err("no frontend driver found for this B2C2/FlexCop adapter");
@@ -724,10 +756,8 @@ int flexcop_frontend_init(struct flexcop_device *fc)
 fe_found:
 	info("found '%s' .", fc->fe->ops.info.name);
 	if (dvb_register_frontend(&fc->dvb_adapter, fc->fe)) {
-		struct dvb_frontend_ops *ops = &fc->fe->ops;
 		err("frontend registration failed!");
-		if (ops->release != NULL)
-			ops->release(fc->fe);
+		dvb_frontend_detach(fc->fe);
 		fc->fe = NULL;
 		return -EINVAL;
 	}
diff --git a/linux/drivers/media/dvb/dvb-core/dvb_demux.c b/linux/drivers/media/dvb/dvb-core/dvb_demux.c
index e2eca0b1f..cfe2768d2 100644
--- a/linux/drivers/media/dvb/dvb-core/dvb_demux.c
+++ b/linux/drivers/media/dvb/dvb-core/dvb_demux.c
@@ -38,6 +38,16 @@
 */
 // #define DVB_DEMUX_SECTION_LOSS_LOG
 
+static int dvb_demux_tscheck;
+module_param(dvb_demux_tscheck, int, 0644);
+MODULE_PARM_DESC(dvb_demux_tscheck,
+		"enable transport stream continuity and TEI check");
+
+#define dprintk_tscheck(x...) do {                              \
+		if (dvb_demux_tscheck && printk_ratelimit())    \
+			printk(x);                              \
+	} while (0)
+
 /******************************************************************************
  * static inlined helper functions
  ******************************************************************************/
@@ -376,6 +386,36 @@ static void dvb_dmx_swfilter_packet(struct dvb_demux *demux, const u8 *buf)
 	u16 pid = ts_pid(buf);
 	int dvr_done = 0;
 
+	if (dvb_demux_tscheck) {
+		if (!demux->cnt_storage)
+			demux->cnt_storage = vmalloc(MAX_PID + 1);
+
+		if (!demux->cnt_storage) {
+			printk(KERN_WARNING "Couldn't allocate memory for TS/TEI check. Disabling it\n");
+			dvb_demux_tscheck = 0;
+			goto no_dvb_demux_tscheck;
+		}
+
+		/* check pkt counter */
+		if (pid < MAX_PID) {
+			if (buf[1] & 0x80)
+				dprintk_tscheck("TEI detected. "
+						"PID=0x%x data1=0x%x\n",
+						pid, buf[1]);
+
+			if ((buf[3] & 0xf) != demux->cnt_storage[pid])
+				dprintk_tscheck("TS packet counter mismatch. "
+						"PID=0x%x expected 0x%x "
+						"got 0x%x\n",
+						pid, demux->cnt_storage[pid],
+						buf[3] & 0xf);
+
+			demux->cnt_storage[pid] = ((buf[3] & 0xf) + 1)&0xf;
+		};
+		/* end check */
+	};
+no_dvb_demux_tscheck:
+
 	list_for_each_entry(feed, &demux->feed_list, list_head) {
 		if ((feed->pid != pid) && (feed->pid != 0x2000))
 			continue;
@@ -1160,6 +1200,7 @@ int dvb_dmx_init(struct dvb_demux *dvbdemux)
 	int i;
 	struct dmx_demux *dmx = &dvbdemux->dmx;
 
+	dvbdemux->cnt_storage = NULL;
 	dvbdemux->users = 0;
 	dvbdemux->filter = vmalloc(dvbdemux->filternum * sizeof(struct dvb_demux_filter));
 
@@ -1226,6 +1267,7 @@ EXPORT_SYMBOL(dvb_dmx_init);
 
 void dvb_dmx_release(struct dvb_demux *dvbdemux)
 {
+	vfree(dvbdemux->cnt_storage);
 	vfree(dvbdemux->filter);
 	vfree(dvbdemux->feed);
 }
diff --git a/linux/drivers/media/dvb/dvb-core/dvb_demux.h b/linux/drivers/media/dvb/dvb-core/dvb_demux.h
index 933397c24..1e0ade4ec 100644
--- a/linux/drivers/media/dvb/dvb-core/dvb_demux.h
+++ b/linux/drivers/media/dvb/dvb-core/dvb_demux.h
@@ -43,6 +43,8 @@
 
 #define DVB_DEMUX_MASK_MAX 18
 
+#define MAX_PID 0x1fff
+
 struct dvb_demux_filter {
 	struct dmx_section_filter filter;
 	u8 maskandmode[DMX_MAX_FILTER_SIZE];
@@ -128,6 +130,8 @@ struct dvb_demux {
 
 	struct mutex mutex;
 	spinlock_t lock;
+
+	uint8_t *cnt_storage; /* for TS continuity check */
 };
 
 int dvb_dmx_init(struct dvb_demux *dvbdemux);
diff --git a/linux/drivers/media/dvb/frontends/lnbp21.c b/linux/drivers/media/dvb/frontends/lnbp21.c
index 1dcc56f32..71f607fe8 100644
--- a/linux/drivers/media/dvb/frontends/lnbp21.c
+++ b/linux/drivers/media/dvb/frontends/lnbp21.c
@@ -133,7 +133,7 @@ static struct dvb_frontend *lnbx2x_attach(struct dvb_frontend *fe,
 	/* override frontend ops */
 	fe->ops.set_voltage = lnbp21_set_voltage;
 	fe->ops.enable_high_lnb_voltage = lnbp21_enable_high_lnb_voltage;
-	printk(KERN_INFO "LNBx2x attached on addr=%x", lnbp21->i2c_addr);
+	printk(KERN_INFO "LNBx2x attached on addr=%x\n", lnbp21->i2c_addr);
 
 	return fe;
 }
diff --git a/linux/drivers/media/radio/dsbr100.c b/linux/drivers/media/radio/dsbr100.c
index bd13bef85..2bb867720 100644
--- a/linux/drivers/media/radio/dsbr100.c
+++ b/linux/drivers/media/radio/dsbr100.c
@@ -33,6 +33,10 @@
 
  History:
 
+ Version 0.46:
+	Removed usb_dsbr100_open/close calls and radio->users counter. Also,
+	radio->muted changed to radio->status and suspend/resume calls updated.
+
  Version 0.45:
 	Converted to v4l2_device.
 
@@ -101,8 +105,8 @@
  */
 #include <linux/version.h>	/* for KERNEL_VERSION MACRO	*/
 
-#define DRIVER_VERSION "v0.45"
-#define RADIO_VERSION KERNEL_VERSION(0, 4, 5)
+#define DRIVER_VERSION "v0.46"
+#define RADIO_VERSION KERNEL_VERSION(0, 4, 6)
 
 #define DRIVER_AUTHOR "Markus Demleitner <msdemlei@tucana.harvard.edu>"
 #define DRIVER_DESC "D-Link DSB-R100 USB FM radio driver"
@@ -122,13 +126,15 @@ devices, that would be 76 and 91.  */
 #define FREQ_MAX 108.0
 #define FREQ_MUL 16000
 
+/* defines for radio->status */
+#define STARTED	0
+#define STOPPED	1
+
 #define videodev_to_radio(d) container_of(d, struct dsbr100_device, videodev)
 
 static int usb_dsbr100_probe(struct usb_interface *intf,
 			     const struct usb_device_id *id);
 static void usb_dsbr100_disconnect(struct usb_interface *intf);
-static int usb_dsbr100_open(struct file *file);
-static int usb_dsbr100_close(struct file *file);
 static int usb_dsbr100_suspend(struct usb_interface *intf,
 						pm_message_t message);
 static int usb_dsbr100_resume(struct usb_interface *intf);
@@ -146,9 +152,8 @@ struct dsbr100_device {
 	struct mutex lock;	/* buffer locking */
 	int curfreq;
 	int stereo;
-	int users;
 	int removed;
-	int muted;
+	int status;
 };
 
 static struct usb_device_id usb_dsbr100_device_table [] = {
@@ -204,7 +209,7 @@ static int dsbr100_start(struct dsbr100_device *radio)
 		goto usb_control_msg_failed;
 	}
 
-	radio->muted = 0;
+	radio->status = STARTED;
 	mutex_unlock(&radio->lock);
 	return (radio->transfer_buffer)[0];
 
@@ -247,7 +252,7 @@ static int dsbr100_stop(struct dsbr100_device *radio)
 		goto usb_control_msg_failed;
 	}
 
-	radio->muted = 1;
+	radio->status = STOPPED;
 	mutex_unlock(&radio->lock);
 	return (radio->transfer_buffer)[0];
 
@@ -261,12 +266,12 @@ usb_control_msg_failed:
 }
 
 /* set a frequency, freq is defined by v4l's TUNER_LOW, i.e. 1/16th kHz */
-static int dsbr100_setfreq(struct dsbr100_device *radio, int freq)
+static int dsbr100_setfreq(struct dsbr100_device *radio)
 {
 	int retval;
 	int request;
+	int freq = (radio->curfreq / 16 * 80) / 1000 + 856;
 
-	freq = (freq / 16 * 80) / 1000 + 856;
 	mutex_lock(&radio->lock);
 
 	retval = usb_control_msg(radio->usbdev,
@@ -434,7 +439,7 @@ static int vidioc_s_frequency(struct file *file, void *priv,
 	radio->curfreq = f->frequency;
 	mutex_unlock(&radio->lock);
 
-	retval = dsbr100_setfreq(radio, radio->curfreq);
+	retval = dsbr100_setfreq(radio);
 	if (retval < 0)
 		dev_warn(&radio->usbdev->dev, "Set frequency failed\n");
 	return 0;
@@ -476,7 +481,7 @@ static int vidioc_g_ctrl(struct file *file, void *priv,
 
 	switch (ctrl->id) {
 	case V4L2_CID_AUDIO_MUTE:
-		ctrl->value = radio->muted;
+		ctrl->value = radio->status;
 		return 0;
 	}
 	return -EINVAL;
@@ -546,65 +551,27 @@ static int vidioc_s_audio(struct file *file, void *priv,
 	return 0;
 }
 
-static int usb_dsbr100_open(struct file *file)
-{
-	struct dsbr100_device *radio = video_drvdata(file);
-	int retval;
-
-	lock_kernel();
-	radio->users = 1;
-	radio->muted = 1;
-
-	retval = dsbr100_start(radio);
-	if (retval < 0) {
-		dev_warn(&radio->usbdev->dev,
-			 "Radio did not start up properly\n");
-		radio->users = 0;
-		unlock_kernel();
-		return -EIO;
-	}
-
-	retval = dsbr100_setfreq(radio, radio->curfreq);
-	if (retval < 0)
-		dev_warn(&radio->usbdev->dev,
-			"set frequency failed\n");
-
-	unlock_kernel();
-	return 0;
-}
-
-static int usb_dsbr100_close(struct file *file)
-{
-	struct dsbr100_device *radio = video_drvdata(file);
-	int retval;
-
-	if (!radio)
-		return -ENODEV;
-
-	mutex_lock(&radio->lock);
-	radio->users = 0;
-	mutex_unlock(&radio->lock);
-
-	if (!radio->removed) {
-		retval = dsbr100_stop(radio);
-		if (retval < 0) {
-			dev_warn(&radio->usbdev->dev,
-				"dsbr100_stop failed\n");
-		}
-
-	}
-	return 0;
-}
-
 /* Suspend device - stop device. */
 static int usb_dsbr100_suspend(struct usb_interface *intf, pm_message_t message)
 {
 	struct dsbr100_device *radio = usb_get_intfdata(intf);
 	int retval;
 
-	retval = dsbr100_stop(radio);
-	if (retval < 0)
-		dev_warn(&intf->dev, "dsbr100_stop failed\n");
+	if (radio->status == STARTED) {
+		retval = dsbr100_stop(radio);
+		if (retval < 0)
+			dev_warn(&intf->dev, "dsbr100_stop failed\n");
+
+		/* After dsbr100_stop() status set to STOPPED.
+		 * If we want driver to start radio on resume
+		 * we set status equal to STARTED.
+		 * On resume we will check status and run radio if needed.
+		 */
+
+		mutex_lock(&radio->lock);
+		radio->status = STARTED;
+		mutex_unlock(&radio->lock);
+	}
 
 	dev_info(&intf->dev, "going into suspend..\n");
 
@@ -617,9 +584,11 @@ static int usb_dsbr100_resume(struct usb_interface *intf)
 	struct dsbr100_device *radio = usb_get_intfdata(intf);
 	int retval;
 
-	retval = dsbr100_start(radio);
-	if (retval < 0)
-		dev_warn(&intf->dev, "dsbr100_start failed\n");
+	if (radio->status == STARTED) {
+		retval = dsbr100_start(radio);
+		if (retval < 0)
+			dev_warn(&intf->dev, "dsbr100_start failed\n");
+	}
 
 	dev_info(&intf->dev, "coming out of suspend..\n");
 
@@ -639,8 +608,6 @@ static void usb_dsbr100_video_device_release(struct video_device *videodev)
 /* File system interface */
 static const struct v4l2_file_operations usb_dsbr100_fops = {
 	.owner		= THIS_MODULE,
-	.open		= usb_dsbr100_open,
-	.release	= usb_dsbr100_close,
 	.ioctl		= video_ioctl2,
 };
 
@@ -698,9 +665,9 @@ static int usb_dsbr100_probe(struct usb_interface *intf,
 	mutex_init(&radio->lock);
 
 	radio->removed = 0;
-	radio->users = 0;
 	radio->usbdev = interface_to_usbdev(intf);
 	radio->curfreq = FREQ_MIN * FREQ_MUL;
+	radio->status = STOPPED;
 
 	video_set_drvdata(&radio->videodev, radio);
 
diff --git a/linux/drivers/media/video/Makefile b/linux/drivers/media/video/Makefile
index f7d9a4c6f..7fb3add1b 100644
--- a/linux/drivers/media/video/Makefile
+++ b/linux/drivers/media/video/Makefile
@@ -12,6 +12,8 @@ omap2cam-objs	:=	omap24xxcam.o omap24xxcam-dma.o
 
 videodev-objs	:=	v4l2-dev.o v4l2-ioctl.o v4l2-device.o
 
+# V4L2 core modules
+
 obj-$(CONFIG_VIDEO_DEV) += videodev.o v4l2-int-device.o
 ifeq ($(CONFIG_COMPAT),y)
   obj-$(CONFIG_VIDEO_DEV) += v4l2-compat-ioctl32.o
@@ -23,21 +25,15 @@ ifeq ($(CONFIG_VIDEO_V4L1_COMPAT),y)
   obj-$(CONFIG_VIDEO_DEV) += v4l1-compat.o
 endif
 
-obj-$(CONFIG_VIDEO_TUNER) += tuner.o
+# All i2c modules must come first:
 
-obj-$(CONFIG_VIDEO_BT848) += bt8xx/
-obj-$(CONFIG_VIDEO_IR_I2C)  += ir-kbd-i2c.o
+obj-$(CONFIG_VIDEO_TUNER) += tuner.o
 obj-$(CONFIG_VIDEO_TVAUDIO) += tvaudio.o
 obj-$(CONFIG_VIDEO_TDA7432) += tda7432.o
 obj-$(CONFIG_VIDEO_TDA9875) += tda9875.o
-
 obj-$(CONFIG_VIDEO_SAA6588) += saa6588.o
 obj-$(CONFIG_VIDEO_SAA5246A) += saa5246a.o
 obj-$(CONFIG_VIDEO_SAA5249) += saa5249.o
-obj-$(CONFIG_VIDEO_CQCAM) += c-qcam.o
-obj-$(CONFIG_VIDEO_BWQCAM) += bw-qcam.o
-obj-$(CONFIG_VIDEO_W9966) += w9966.o
-
 obj-$(CONFIG_VIDEO_TDA9840) += tda9840.o
 obj-$(CONFIG_VIDEO_TEA6415C) += tea6415c.o
 obj-$(CONFIG_VIDEO_TEA6420) += tea6420.o
@@ -56,11 +52,40 @@ obj-$(CONFIG_VIDEO_BT856) += bt856.o
 obj-$(CONFIG_VIDEO_BT866) += bt866.o
 obj-$(CONFIG_VIDEO_KS0127) += ks0127.o
 obj-$(CONFIG_VIDEO_THS7303) += ths7303.o
+obj-$(CONFIG_VIDEO_VINO) += indycam.o
+obj-$(CONFIG_VIDEO_TVP5150) += tvp5150.o
+obj-$(CONFIG_VIDEO_TVP514X) += tvp514x.o
+obj-$(CONFIG_VIDEO_MSP3400) += msp3400.o
+obj-$(CONFIG_VIDEO_CS5345) += cs5345.o
+obj-$(CONFIG_VIDEO_CS53L32A) += cs53l32a.o
+obj-$(CONFIG_VIDEO_M52790) += m52790.o
+obj-$(CONFIG_VIDEO_TLV320AIC23B) += tlv320aic23b.o
+obj-$(CONFIG_VIDEO_WM8775) += wm8775.o
+obj-$(CONFIG_VIDEO_WM8739) += wm8739.o
+obj-$(CONFIG_VIDEO_VP27SMPX) += vp27smpx.o
+obj-$(CONFIG_VIDEO_CX25840) += cx25840/
+obj-$(CONFIG_VIDEO_UPD64031A) += upd64031a.o
+obj-$(CONFIG_VIDEO_UPD64083) += upd64083.o
+obj-$(CONFIG_VIDEO_OV7670) 	+= ov7670.o
+obj-$(CONFIG_VIDEO_TCM825X) += tcm825x.o
+obj-$(CONFIG_VIDEO_TVEEPROM) += tveeprom.o
 
-obj-$(CONFIG_VIDEO_ZORAN) += zoran/
+obj-$(CONFIG_SOC_CAMERA_MT9M001)	+= mt9m001.o
+obj-$(CONFIG_SOC_CAMERA_MT9M111)	+= mt9m111.o
+obj-$(CONFIG_SOC_CAMERA_MT9T031)	+= mt9t031.o
+obj-$(CONFIG_SOC_CAMERA_MT9V022)	+= mt9v022.o
+obj-$(CONFIG_SOC_CAMERA_OV772X)		+= ov772x.o
+obj-$(CONFIG_SOC_CAMERA_TW9910)		+= tw9910.o
+
+# And now the v4l2 drivers:
 
+obj-$(CONFIG_VIDEO_BT848) += bt8xx/
+obj-$(CONFIG_VIDEO_ZORAN) += zoran/
+obj-$(CONFIG_VIDEO_CQCAM) += c-qcam.o
+obj-$(CONFIG_VIDEO_BWQCAM) += bw-qcam.o
+obj-$(CONFIG_VIDEO_W9966) += w9966.o
 obj-$(CONFIG_VIDEO_PMS) += pms.o
-obj-$(CONFIG_VIDEO_VINO) += vino.o indycam.o
+obj-$(CONFIG_VIDEO_VINO) += vino.o
 obj-$(CONFIG_VIDEO_STRADIS) += stradis.o
 obj-$(CONFIG_VIDEO_CPIA) += cpia.o
 obj-$(CONFIG_VIDEO_CPIA_PP) += cpia_pp.o
@@ -71,17 +96,7 @@ obj-$(CONFIG_VIDEO_CX88) += cx88/
 obj-$(CONFIG_VIDEO_EM28XX) += em28xx/
 obj-$(CONFIG_VIDEO_CX231XX) += cx231xx/
 obj-$(CONFIG_VIDEO_USBVISION) += usbvision/
-obj-$(CONFIG_VIDEO_TVP5150) += tvp5150.o
-obj-$(CONFIG_VIDEO_TVP514X) += tvp514x.o
 obj-$(CONFIG_VIDEO_PVRUSB2) += pvrusb2/
-obj-$(CONFIG_VIDEO_MSP3400) += msp3400.o
-obj-$(CONFIG_VIDEO_CS5345) += cs5345.o
-obj-$(CONFIG_VIDEO_CS53L32A) += cs53l32a.o
-obj-$(CONFIG_VIDEO_M52790) += m52790.o
-obj-$(CONFIG_VIDEO_TLV320AIC23B) += tlv320aic23b.o
-obj-$(CONFIG_VIDEO_WM8775) += wm8775.o
-obj-$(CONFIG_VIDEO_WM8739) += wm8739.o
-obj-$(CONFIG_VIDEO_VP27SMPX) += vp27smpx.o
 obj-$(CONFIG_VIDEO_OVCAMCHIP) += ovcamchip/
 obj-$(CONFIG_VIDEO_CPIA2) += cpia2/
 obj-$(CONFIG_VIDEO_MXB) += mxb.o
@@ -94,19 +109,12 @@ obj-$(CONFIG_VIDEOBUF_DMA_CONTIG) += videobuf-dma-contig.o
 obj-$(CONFIG_VIDEOBUF_VMALLOC) += videobuf-vmalloc.o
 obj-$(CONFIG_VIDEOBUF_DVB) += videobuf-dvb.o
 obj-$(CONFIG_VIDEO_BTCX)  += btcx-risc.o
-obj-$(CONFIG_VIDEO_TVEEPROM) += tveeprom.o
 
 obj-$(CONFIG_VIDEO_M32R_AR_M64278) += arv.o
 
-obj-$(CONFIG_VIDEO_CX25840) += cx25840/
-obj-$(CONFIG_VIDEO_UPD64031A) += upd64031a.o
-obj-$(CONFIG_VIDEO_UPD64083) += upd64083.o
 obj-$(CONFIG_VIDEO_CX2341X) += cx2341x.o
 
 obj-$(CONFIG_VIDEO_CAFE_CCIC) += cafe_ccic.o
-obj-$(CONFIG_VIDEO_OV7670) 	+= ov7670.o
-
-obj-$(CONFIG_VIDEO_TCM825X) += tcm825x.o
 
 obj-$(CONFIG_USB_DABUSB)        += dabusb.o
 obj-$(CONFIG_USB_OV511)         += ov511.o
@@ -138,13 +146,7 @@ obj-$(CONFIG_VIDEO_CX23885) += cx23885/
 
 obj-$(CONFIG_VIDEO_OMAP2)		+= omap2cam.o
 obj-$(CONFIG_SOC_CAMERA)		+= soc_camera.o
-obj-$(CONFIG_SOC_CAMERA_MT9M001)	+= mt9m001.o
-obj-$(CONFIG_SOC_CAMERA_MT9M111)	+= mt9m111.o
-obj-$(CONFIG_SOC_CAMERA_MT9T031)	+= mt9t031.o
-obj-$(CONFIG_SOC_CAMERA_MT9V022)	+= mt9v022.o
-obj-$(CONFIG_SOC_CAMERA_OV772X)		+= ov772x.o
 obj-$(CONFIG_SOC_CAMERA_PLATFORM)	+= soc_camera_platform.o
-obj-$(CONFIG_SOC_CAMERA_TW9910)		+= tw9910.o
 # soc-camera host drivers have to be linked after camera drivers
 obj-$(CONFIG_VIDEO_MX1)			+= mx1_camera.o
 obj-$(CONFIG_VIDEO_MX3)			+= mx3_camera.o
@@ -155,6 +157,8 @@ obj-$(CONFIG_VIDEO_AU0828) += au0828/
 
 obj-$(CONFIG_USB_VIDEO_CLASS)	+= uvc/
 
+obj-$(CONFIG_VIDEO_IR_I2C)  += ir-kbd-i2c.o
+
 EXTRA_CFLAGS += -Idrivers/media/dvb/dvb-core
 EXTRA_CFLAGS += -Idrivers/media/dvb/frontends
 EXTRA_CFLAGS += -Idrivers/media/common/tuners
diff --git a/linux/drivers/media/video/cx18/cx18-cards.c b/linux/drivers/media/video/cx18/cx18-cards.c
index 8c25ca8e3..fa755a982 100644
--- a/linux/drivers/media/video/cx18/cx18-cards.c
+++ b/linux/drivers/media/video/cx18/cx18-cards.c
@@ -351,13 +351,12 @@ static const struct cx18_card cx18_card_toshiba_qosmio_dvbt = {
 
 static const struct cx18_card_pci_info cx18_pci_leadtek_pvr2100[] = {
 	{ PCI_DEVICE_ID_CX23418, CX18_PCI_ID_LEADTEK, 0x6f27 }, /* PVR2100   */
-	{ PCI_DEVICE_ID_CX23418, CX18_PCI_ID_LEADTEK, 0x6690 }, /* DVR3100 H */
 	{ 0, 0, 0 }
 };
 
 static const struct cx18_card cx18_card_leadtek_pvr2100 = {
 	.type = CX18_CARD_LEADTEK_PVR2100,
-	.name = "Leadtek WinFast PVR2100/DVR3100 H",
+	.name = "Leadtek WinFast PVR2100",
 	.comment = "Experimenters and photos needed for device to work well.\n"
 		  "\tTo help, mail the ivtv-devel list (www.ivtvdriver.org).\n",
 	.v4l2_capabilities = CX18_CAP_ENCODER,
@@ -376,15 +375,12 @@ static const struct cx18_card cx18_card_leadtek_pvr2100 = {
 		{ CX18_CARD_INPUT_LINE_IN1,  CX18_AV_AUDIO_SERIAL1, 1 },
 	},
 	.tuners = {
-		/* XC3028 tuner */
+		/* XC2028 tuner */
 		{ .std = V4L2_STD_ALL, .tuner = TUNER_XC2028 },
 	},
 	.radio_input = { CX18_CARD_INPUT_AUD_TUNER, CX18_AV_AUDIO5, 2 },
 	.ddr = {
-		/*
-		 * Pointer to proper DDR config values provided by
-		 * Terry Wu <terrywu at leadtek.com.tw>
-		 */
+		/* Pointer to proper DDR config values provided by Terry Wu */
 		.chip_config = 0x303,
 		.refresh = 0x3bb,
 		.timing1 = 0x24220e83,
@@ -403,6 +399,58 @@ static const struct cx18_card cx18_card_leadtek_pvr2100 = {
 
 /* ------------------------------------------------------------------------- */
 
+/* Leadtek WinFast DVR3100 H */
+
+static const struct cx18_card_pci_info cx18_pci_leadtek_dvr3100h[] = {
+	{ PCI_DEVICE_ID_CX23418, CX18_PCI_ID_LEADTEK, 0x6690 }, /* DVR3100 H */
+	{ 0, 0, 0 }
+};
+
+static const struct cx18_card cx18_card_leadtek_dvr3100h = {
+	.type = CX18_CARD_LEADTEK_DVR3100H,
+	.name = "Leadtek WinFast DVR3100 H",
+	.comment = "Simultaneous DVB-T and Analog capture supported,\n"
+		  "\texcept when capturing Analog from the antenna input.\n",
+	.v4l2_capabilities = CX18_CAP_ENCODER,
+	.hw_audio_ctrl = CX18_HW_418_AV,
+	.hw_muxer = CX18_HW_GPIO_MUX,
+	.hw_all = CX18_HW_418_AV | CX18_HW_TUNER | CX18_HW_GPIO_MUX |
+		  CX18_HW_DVB | CX18_HW_GPIO_RESET_CTRL,
+	.video_inputs = {
+		{ CX18_CARD_INPUT_VID_TUNER,  0, CX18_AV_COMPOSITE2 },
+		{ CX18_CARD_INPUT_SVIDEO1,    1,
+			CX18_AV_SVIDEO_LUMA3 | CX18_AV_SVIDEO_CHROMA4 },
+		{ CX18_CARD_INPUT_COMPOSITE1, 1, CX18_AV_COMPOSITE7 },
+	},
+	.audio_inputs = {
+		{ CX18_CARD_INPUT_AUD_TUNER, CX18_AV_AUDIO5, 	    0 },
+		{ CX18_CARD_INPUT_LINE_IN1,  CX18_AV_AUDIO_SERIAL1, 1 },
+	},
+	.tuners = {
+		/* XC3028 tuner */
+		{ .std = V4L2_STD_ALL, .tuner = TUNER_XC2028 },
+	},
+	.radio_input = { CX18_CARD_INPUT_AUD_TUNER, CX18_AV_AUDIO5, 2 },
+	.ddr = {
+		/* Pointer to proper DDR config values provided by Terry Wu */
+		.chip_config = 0x303,
+		.refresh = 0x3bb,
+		.timing1 = 0x24220e83,
+		.timing2 = 0x1f,
+		.tune_lane = 0,
+		.initial_emrs = 0x2,
+	},
+	.gpio_init.initial_value = 0x6,
+	.gpio_init.direction = 0x7,
+	.gpio_audio_input = { .mask   = 0x7,
+			      .tuner  = 0x6, .linein = 0x2, .radio  = 0x2 },
+	.xceive_pin = 1,
+	.pci_list = cx18_pci_leadtek_dvr3100h,
+	.i2c = &cx18_i2c_std,
+};
+
+/* ------------------------------------------------------------------------- */
+
 static const struct cx18_card *cx18_card_list[] = {
 	&cx18_card_hvr1600_esmt,
 	&cx18_card_hvr1600_samsung,
@@ -411,6 +459,7 @@ static const struct cx18_card *cx18_card_list[] = {
 	&cx18_card_cnxt_raptor_pal,
 	&cx18_card_toshiba_qosmio_dvbt,
 	&cx18_card_leadtek_pvr2100,
+	&cx18_card_leadtek_dvr3100h,
 };
 
 const struct cx18_card *cx18_get_card(u16 index)
diff --git a/linux/drivers/media/video/cx18/cx18-driver.c b/linux/drivers/media/video/cx18/cx18-driver.c
index f42a97314..7ffdda49c 100644
--- a/linux/drivers/media/video/cx18/cx18-driver.c
+++ b/linux/drivers/media/video/cx18/cx18-driver.c
@@ -152,7 +152,8 @@ MODULE_PARM_DESC(cardtype,
 		 "\t\t\t 4 = Yuan MPC718\n"
 		 "\t\t\t 5 = Conexant Raptor PAL/SECAM\n"
 		 "\t\t\t 6 = Toshiba Qosmio DVB-T/Analog\n"
-		 "\t\t\t 7 = Leadtek WinFast PVR2100/DVR3100 H\n"
+		 "\t\t\t 7 = Leadtek WinFast PVR2100\n"
+		 "\t\t\t 8 = Leadtek WinFast DVR3100 H\n"
 		 "\t\t\t 0 = Autodetect (default)\n"
 		 "\t\t\t-1 = Ignore this card\n\t\t");
 MODULE_PARM_DESC(pal, "Set PAL standard: B, G, H, D, K, I, M, N, Nc, 60");
diff --git a/linux/drivers/media/video/cx18/cx18-driver.h b/linux/drivers/media/video/cx18/cx18-driver.h
index f89b82367..c6a1e907f 100644
--- a/linux/drivers/media/video/cx18/cx18-driver.h
+++ b/linux/drivers/media/video/cx18/cx18-driver.h
@@ -80,8 +80,9 @@
 #define CX18_CARD_YUAN_MPC718 	      3	/* Yuan MPC718 */
 #define CX18_CARD_CNXT_RAPTOR_PAL     4	/* Conexant Raptor PAL */
 #define CX18_CARD_TOSHIBA_QOSMIO_DVBT 5 /* Toshiba Qosmio Interal DVB-T/Analog*/
-#define CX18_CARD_LEADTEK_PVR2100     6 /* Leadtek WinFast PVR2100/DVR3100 H */
-#define CX18_CARD_LAST 		      6
+#define CX18_CARD_LEADTEK_PVR2100     6 /* Leadtek WinFast PVR2100 */
+#define CX18_CARD_LEADTEK_DVR3100H    7 /* Leadtek WinFast DVR3100 H */
+#define CX18_CARD_LAST 		      7
 
 #define CX18_ENC_STREAM_TYPE_MPG  0
 #define CX18_ENC_STREAM_TYPE_TS   1
diff --git a/linux/drivers/media/video/cx18/cx18-dvb.c b/linux/drivers/media/video/cx18/cx18-dvb.c
index e7285a109..6ea3fe623 100644
--- a/linux/drivers/media/video/cx18/cx18-dvb.c
+++ b/linux/drivers/media/video/cx18/cx18-dvb.c
@@ -26,12 +26,17 @@
 #include "cx18-queue.h"
 #include "cx18-streams.h"
 #include "cx18-cards.h"
+#include "cx18-gpio.h"
 #include "s5h1409.h"
 #include "mxl5005s.h"
+#include "zl10353.h"
+#include "tuner-xc2028.h"
 
 DVB_DEFINE_MOD_OPT_ADAPTER_NR(adapter_nr);
 
 #define CX18_REG_DMUX_NUM_PORT_0_CONTROL 0xd5a000
+#define CX18_CLOCK_ENABLE2		 0xc71024
+#define CX18_DMUX_CLK_MASK		 0x0080
 
 static struct mxl5005s_config hauppauge_hvr1600_tuner = {
 	.i2c_address     = 0xC6 >> 1,
@@ -58,7 +63,15 @@ static struct s5h1409_config hauppauge_hvr1600_config = {
 	.inversion     = S5H1409_INVERSION_OFF,
 	.status_mode   = S5H1409_DEMODLOCKING,
 	.mpeg_timing   = S5H1409_MPEGTIMING_CONTINOUS_NONINVERTING_CLOCK
+};
 
+/* Information/confirmation of proper config values provided by Terry Wu */
+static struct zl10353_config leadtek_dvr3100h_demod = {
+	.demod_address         = 0x1e >> 1, /* Datasheet suggested straps */
+	.if2                   = 45600,     /* 4.560 MHz IF from the XC3028 */
+	.parallel_ts           = 1,         /* Not a serial TS */
+	.no_tuner              = 1,         /* XC3028 is not behind the gate */
+	.disable_i2c_gate_ctrl = 1,         /* Disable the I2C gate */
 };
 
 static int dvb_register(struct cx18_stream *stream);
@@ -99,6 +112,7 @@ static int cx18_dvb_start_feed(struct dvb_demux_feed *feed)
 		cx18_write_reg(cx, v, CX18_REG_DMUX_NUM_PORT_0_CONTROL);
 		break;
 
+	case CX18_CARD_LEADTEK_DVR3100H:
 	default:
 		/* Assumption - Parallel transport - Signalling
 		 * undefined or default.
@@ -268,8 +282,7 @@ void cx18_dvb_unregister(struct cx18_stream *stream)
 }
 
 /* All the DVB attach calls go here, this function get's modified
- * for each new card. No other function in this file needs
- * to change.
+ * for each new card. cx18_dvb_start_feed() will also need changes.
  */
 static int dvb_register(struct cx18_stream *stream)
 {
@@ -290,6 +303,29 @@ static int dvb_register(struct cx18_stream *stream)
 			ret = 0;
 		}
 		break;
+	case CX18_CARD_LEADTEK_DVR3100H:
+		dvb->fe = dvb_attach(zl10353_attach,
+				     &leadtek_dvr3100h_demod,
+				     &cx->i2c_adap[1]);
+		if (dvb->fe != NULL) {
+			struct dvb_frontend *fe;
+			struct xc2028_config cfg = {
+				.i2c_adap = &cx->i2c_adap[1],
+				.i2c_addr = 0xc2 >> 1,
+				.ctrl = NULL,
+			};
+			static struct xc2028_ctrl ctrl = {
+				.fname   = XC2028_DEFAULT_FIRMWARE,
+				.max_len = 64,
+				.demod   = XC3028_FE_ZARLINK456,
+				.type    = XC2028_AUTO,
+			};
+
+			fe = dvb_attach(xc2028_attach, dvb->fe, &cfg);
+			if (fe != NULL && fe->ops.tuner_ops.set_config != NULL)
+				fe->ops.tuner_ops.set_config(fe, &ctrl);
+		}
+		break;
 	default:
 		/* No Digital Tv Support */
 		break;
@@ -300,6 +336,8 @@ static int dvb_register(struct cx18_stream *stream)
 		return -1;
 	}
 
+	dvb->fe->callback = cx18_reset_tuner_gpio;
+
 	ret = dvb_register_frontend(&dvb->dvb_adapter, dvb->fe);
 	if (ret < 0) {
 		if (dvb->fe->ops.release)
@@ -307,5 +345,16 @@ static int dvb_register(struct cx18_stream *stream)
 		return ret;
 	}
 
+	/*
+	 * The firmware seems to enable the TS DMUX clock
+	 * under various circumstances.  However, since we know we
+	 * might use it, let's just turn it on ourselves here.
+	 */
+	cx18_write_reg_expect(cx,
+			      (CX18_DMUX_CLK_MASK << 16) | CX18_DMUX_CLK_MASK,
+			      CX18_CLOCK_ENABLE2,
+			      CX18_DMUX_CLK_MASK,
+			      (CX18_DMUX_CLK_MASK << 16) | CX18_DMUX_CLK_MASK);
+
 	return ret;
 }
diff --git a/linux/drivers/media/video/gspca/gspca.c b/linux/drivers/media/video/gspca/gspca.c
index 3bf8b4866..e6ab4bb8c 100644
--- a/linux/drivers/media/video/gspca/gspca.c
+++ b/linux/drivers/media/video/gspca/gspca.c
@@ -1021,43 +1021,54 @@ out:
 	return ret;
 }
 
+static const struct ctrl *get_ctrl(struct gspca_dev *gspca_dev,
+				   int id)
+{
+	const struct ctrl *ctrls;
+	int i;
+
+	for (i = 0, ctrls = gspca_dev->sd_desc->ctrls;
+	     i < gspca_dev->sd_desc->nctrls;
+	     i++, ctrls++) {
+		if (gspca_dev->ctrl_dis & (1 << i))
+			continue;
+		if (id == ctrls->qctrl.id)
+			return ctrls;
+	}
+	return NULL;
+}
+
 static int vidioc_queryctrl(struct file *file, void *priv,
 			   struct v4l2_queryctrl *q_ctrl)
 {
 	struct gspca_dev *gspca_dev = priv;
-	int i, ix;
+	const struct ctrl *ctrls;
+	int i;
 	u32 id;
 
-	ix = -1;
+	ctrls = NULL;
 	id = q_ctrl->id;
 	if (id & V4L2_CTRL_FLAG_NEXT_CTRL) {
 		id &= V4L2_CTRL_ID_MASK;
 		id++;
 		for (i = 0; i < gspca_dev->sd_desc->nctrls; i++) {
-			if (gspca_dev->sd_desc->ctrls[i].qctrl.id < id)
+			if (gspca_dev->ctrl_dis & (1 << i))
 				continue;
-			if (ix < 0) {
-				ix = i;
+			if (ctrls->qctrl.id < id)
 				continue;
+			if (ctrls != NULL) {
+				if (gspca_dev->sd_desc->ctrls[i].qctrl.id
+					    > ctrls->qctrl.id)
+					continue;
 			}
-			if (gspca_dev->sd_desc->ctrls[i].qctrl.id
-				    > gspca_dev->sd_desc->ctrls[ix].qctrl.id)
-				continue;
-			ix = i;
-		}
-	}
-	for (i = 0; i < gspca_dev->sd_desc->nctrls; i++) {
-		if (id == gspca_dev->sd_desc->ctrls[i].qctrl.id) {
-			ix = i;
-			break;
+			ctrls = &gspca_dev->sd_desc->ctrls[i];
 		}
+	} else {
+		ctrls = get_ctrl(gspca_dev, id);
 	}
-	if (ix < 0)
+	if (ctrls == NULL)
 		return -EINVAL;
-	memcpy(q_ctrl, &gspca_dev->sd_desc->ctrls[ix].qctrl,
-		sizeof *q_ctrl);
-	if (gspca_dev->ctrl_dis & (1 << ix))
-		q_ctrl->flags |= V4L2_CTRL_FLAG_DISABLED;
+	memcpy(q_ctrl, ctrls, sizeof *q_ctrl);
 	return 0;
 }
 
@@ -1066,56 +1077,45 @@ static int vidioc_s_ctrl(struct file *file, void *priv,
 {
 	struct gspca_dev *gspca_dev = priv;
 	const struct ctrl *ctrls;
-	int i, ret;
+	int ret;
 
-	for (i = 0, ctrls = gspca_dev->sd_desc->ctrls;
-	     i < gspca_dev->sd_desc->nctrls;
-	     i++, ctrls++) {
-		if (ctrl->id != ctrls->qctrl.id)
-			continue;
-		if (gspca_dev->ctrl_dis & (1 << i))
-			return -EINVAL;
-		if (ctrl->value < ctrls->qctrl.minimum
-		    || ctrl->value > ctrls->qctrl.maximum)
-			return -ERANGE;
-		PDEBUG(D_CONF, "set ctrl [%08x] = %d", ctrl->id, ctrl->value);
-		if (mutex_lock_interruptible(&gspca_dev->usb_lock))
-			return -ERESTARTSYS;
-		if (gspca_dev->present)
-			ret = ctrls->set(gspca_dev, ctrl->value);
-		else
-			ret = -ENODEV;
-		mutex_unlock(&gspca_dev->usb_lock);
-		return ret;
-	}
-	return -EINVAL;
+	ctrls = get_ctrl(gspca_dev, ctrl->id);
+	if (ctrls == NULL)
+		return -EINVAL;
+
+	if (ctrl->value < ctrls->qctrl.minimum
+	    || ctrl->value > ctrls->qctrl.maximum)
+		return -ERANGE;
+	PDEBUG(D_CONF, "set ctrl [%08x] = %d", ctrl->id, ctrl->value);
+	if (mutex_lock_interruptible(&gspca_dev->usb_lock))
+		return -ERESTARTSYS;
+	if (gspca_dev->present)
+		ret = ctrls->set(gspca_dev, ctrl->value);
+	else
+		ret = -ENODEV;
+	mutex_unlock(&gspca_dev->usb_lock);
+	return ret;
 }
 
 static int vidioc_g_ctrl(struct file *file, void *priv,
 			 struct v4l2_control *ctrl)
 {
 	struct gspca_dev *gspca_dev = priv;
-
 	const struct ctrl *ctrls;
-	int i, ret;
+	int ret;
 
-	for (i = 0, ctrls = gspca_dev->sd_desc->ctrls;
-	     i < gspca_dev->sd_desc->nctrls;
-	     i++, ctrls++) {
-		if (ctrl->id != ctrls->qctrl.id)
-			continue;
-		if (gspca_dev->ctrl_dis & (1 << i))
-			return -EINVAL;
-		if (mutex_lock_interruptible(&gspca_dev->usb_lock))
-			return -ERESTARTSYS;
-		if (gspca_dev->present)
-			ret = ctrls->get(gspca_dev, &ctrl->value);
-		else
-			ret = -ENODEV;
-		mutex_unlock(&gspca_dev->usb_lock);
-		return ret;
-	}
-	return -EINVAL;
+	ctrls = get_ctrl(gspca_dev, ctrl->id);
+	if (ctrls == NULL)
+		return -EINVAL;
+
+	if (mutex_lock_interruptible(&gspca_dev->usb_lock))
+		return -ERESTARTSYS;
+	if (gspca_dev->present)
+		ret = ctrls->get(gspca_dev, &ctrl->value);
+	else
+		ret = -ENODEV;
+	mutex_unlock(&gspca_dev->usb_lock);
+	return ret;
 }
 
 /*fixme: have an audio flag in gspca_dev?*/
diff --git a/linux/drivers/media/video/gspca/m5602/m5602_ov9650.c b/linux/drivers/media/video/gspca/m5602/m5602_ov9650.c
index bbf9935df..a1245cca1 100644
--- a/linux/drivers/media/video/gspca/m5602/m5602_ov9650.c
+++ b/linux/drivers/media/video/gspca/m5602/m5602_ov9650.c
@@ -47,53 +47,60 @@ static
 #endif
 	struct dmi_system_id ov9650_flip_dmi_table[] = {
 	{
-		.ident = "ASUS A6VA",
+		.ident = "ASUS A6Ja",
 		.matches = {
 			DMI_MATCH(DMI_SYS_VENDOR, "ASUSTeK Computer Inc."),
-			DMI_MATCH(DMI_PRODUCT_NAME, "A6VA")
+			DMI_MATCH(DMI_PRODUCT_NAME, "A6J")
 		}
 	},
 	{
-
-		.ident = "ASUS A6VC",
+		.ident = "ASUS A6JC",
 		.matches = {
 			DMI_MATCH(DMI_SYS_VENDOR, "ASUSTeK Computer Inc."),
-			DMI_MATCH(DMI_PRODUCT_NAME, "A6VC")
+			DMI_MATCH(DMI_PRODUCT_NAME, "A6JC")
 		}
 	},
 	{
-		.ident = "ASUS A6VM",
+		.ident = "ASUS A6K",
 		.matches = {
 			DMI_MATCH(DMI_SYS_VENDOR, "ASUSTeK Computer Inc."),
-			DMI_MATCH(DMI_PRODUCT_NAME, "A6VM")
+			DMI_MATCH(DMI_PRODUCT_NAME, "A6K")
 		}
 	},
 	{
-		.ident = "ASUS A6JC",
+		.ident = "ASUS A6Kt",
 		.matches = {
 			DMI_MATCH(DMI_SYS_VENDOR, "ASUSTeK Computer Inc."),
-			DMI_MATCH(DMI_PRODUCT_NAME, "A6JC")
+			DMI_MATCH(DMI_PRODUCT_NAME, "A6Kt")
 		}
 	},
 	{
-		.ident = "ASUS A6Ja",
+		.ident = "ASUS A6VA",
 		.matches = {
 			DMI_MATCH(DMI_SYS_VENDOR, "ASUSTeK Computer Inc."),
-			DMI_MATCH(DMI_PRODUCT_NAME, "A6J")
+			DMI_MATCH(DMI_PRODUCT_NAME, "A6VA")
 		}
 	},
 	{
-		.ident = "ASUS A6Kt",
+
+		.ident = "ASUS A6VC",
 		.matches = {
 			DMI_MATCH(DMI_SYS_VENDOR, "ASUSTeK Computer Inc."),
-			DMI_MATCH(DMI_PRODUCT_NAME, "A6Kt")
+			DMI_MATCH(DMI_PRODUCT_NAME, "A6VC")
 		}
 	},
 	{
-		.ident = "ASUS A6K",
+		.ident = "ASUS A6VM",
 		.matches = {
 			DMI_MATCH(DMI_SYS_VENDOR, "ASUSTeK Computer Inc."),
-			DMI_MATCH(DMI_PRODUCT_NAME, "A6K")
+			DMI_MATCH(DMI_PRODUCT_NAME, "A6VM")
+		}
+	},
+	{
+		.ident = "ASUS A7V",
+		.matches = {
+			DMI_MATCH(DMI_SYS_VENDOR, "ASUSTeK Computer Inc."),
+			DMI_MATCH(DMI_PRODUCT_NAME, "A7V")
 		}
 	},
 	{
diff --git a/linux/drivers/media/video/gspca/m5602/m5602_s5k4aa.c b/linux/drivers/media/video/gspca/m5602/m5602_s5k4aa.c
index 81f24d413..4a105cb38 100644
--- a/linux/drivers/media/video/gspca/m5602/m5602_s5k4aa.c
+++ b/linux/drivers/media/video/gspca/m5602/m5602_s5k4aa.c
@@ -67,6 +67,12 @@ static
 			DMI_MATCH(DMI_SYS_VENDOR, "Micro-Star International"),
 			DMI_MATCH(DMI_PRODUCT_NAME, "MS-1717X")
 		}
+	}, {
+		.ident = "Lenovo Y300",
+		.matches = {
+			DMI_MATCH(DMI_SYS_VENDOR, "L3000 Y300"),
+			DMI_MATCH(DMI_PRODUCT_NAME, "Y300")
+		}
 	},
 	{ }
 };
diff --git a/linux/drivers/media/video/gspca/ov519.c b/linux/drivers/media/video/gspca/ov519.c
index bd70e9adb..2bd42f4e0 100644
--- a/linux/drivers/media/video/gspca/ov519.c
+++ b/linux/drivers/media/video/gspca/ov519.c
@@ -50,6 +50,13 @@ static int i2c_detect_tries = 10;
 struct sd {
 	struct gspca_dev gspca_dev;		/* !! must be the first item */
 
+	char bridge;
+#define BRIDGE_OV511		0
+#define BRIDGE_OV511PLUS	1
+#define BRIDGE_OV518		2
+#define BRIDGE_OV518PLUS	3
+#define BRIDGE_OV519		4
+
 	/* Determined by sensor type */
 	__u8 sif;
 
@@ -87,6 +94,9 @@ static int sd_sethflip(struct gspca_dev *gspca_dev, __s32 val);
 static int sd_gethflip(struct gspca_dev *gspca_dev, __s32 *val);
 static int sd_setvflip(struct gspca_dev *gspca_dev, __s32 val);
 static int sd_getvflip(struct gspca_dev *gspca_dev, __s32 *val);
+static void setbrightness(struct gspca_dev *gspca_dev);
+static void setcontrast(struct gspca_dev *gspca_dev);
+static void setcolors(struct gspca_dev *gspca_dev);
 
 static struct ctrl sd_ctrls[] = {
 	{
@@ -164,7 +174,7 @@ static struct ctrl sd_ctrls[] = {
 	},
 };
 
-static const struct v4l2_pix_format vga_mode[] = {
+static const struct v4l2_pix_format ov519_vga_mode[] = {
 	{320, 240, V4L2_PIX_FMT_JPEG, V4L2_FIELD_NONE,
 		.bytesperline = 320,
 		.sizeimage = 320 * 240 * 3 / 8 + 590,
@@ -176,7 +186,7 @@ static const struct v4l2_pix_format vga_mode[] = {
 		.colorspace = V4L2_COLORSPACE_JPEG,
 		.priv = 0},
 };
-static const struct v4l2_pix_format sif_mode[] = {
+static const struct v4l2_pix_format ov519_sif_mode[] = {
 	{176, 144, V4L2_PIX_FMT_JPEG, V4L2_FIELD_NONE,
 		.bytesperline = 176,
 		.sizeimage = 176 * 144 * 3 / 8 + 590,
@@ -189,6 +199,47 @@ static const struct v4l2_pix_format sif_mode[] = {
 		.priv = 0},
 };
 
+static const struct v4l2_pix_format ov518_vga_mode[] = {
+	{320, 240, V4L2_PIX_FMT_OV518, V4L2_FIELD_NONE,
+		.bytesperline = 320,
+		.sizeimage = 320 * 240 * 3 / 8 + 590,
+		.colorspace = V4L2_COLORSPACE_JPEG,
+		.priv = 1},
+	{640, 480, V4L2_PIX_FMT_OV518, V4L2_FIELD_NONE,
+		.bytesperline = 640,
+		.sizeimage = 640 * 480 * 3 / 8 + 590,
+		.colorspace = V4L2_COLORSPACE_JPEG,
+		.priv = 0},
+};
+static const struct v4l2_pix_format ov518_sif_mode[] = {
+	{176, 144, V4L2_PIX_FMT_OV518, V4L2_FIELD_NONE,
+		.bytesperline = 176,
+		.sizeimage = 40000,
+		.colorspace = V4L2_COLORSPACE_JPEG,
+		.priv = 1},
+	{352, 288, V4L2_PIX_FMT_OV518, V4L2_FIELD_NONE,
+		.bytesperline = 352,
+		.sizeimage = 352 * 288 * 3 / 8 + 590,
+		.colorspace = V4L2_COLORSPACE_JPEG,
+		.priv = 0},
+};
+
+
+/* Registers common to OV511 / OV518 */
+#define R51x_SYS_RESET          	0x50
+#define R51x_SYS_INIT         		0x53
+#define R51x_SYS_SNAP			0x52
+#define R51x_SYS_CUST_ID		0x5F
+#define R51x_COMP_LUT_BEGIN		0x80
+
+/* OV511 Camera interface register numbers */
+#define R511_SYS_LED_CTL		0x55	/* OV511+ only */
+#define	OV511_RESET_NOREGS		0x3F	/* All but OV511 & regs */
+
+/* OV518 Camera interface register numbers */
+#define R518_GPIO_OUT			0x56	/* OV518(+) only */
+#define R518_GPIO_CTL			0x57	/* OV518(+) only */
+
 /* OV519 Camera interface register numbers */
 #define OV519_R10_H_SIZE		0x10
 #define OV519_R11_V_SIZE		0x11
@@ -224,6 +275,8 @@ static const struct v4l2_pix_format sif_mode[] = {
 
 /* OV7610 registers */
 #define OV7610_REG_GAIN		0x00	/* gain setting (5:0) */
+#define OV7610_REG_BLUE		0x01	/* blue channel balance */
+#define OV7610_REG_RED		0x02	/* red channel balance */
 #define OV7610_REG_SAT		0x03	/* saturation */
 #define OV8610_REG_HUE		0x04	/* 04 reserved */
 #define OV7610_REG_CNT		0x05	/* Y contrast */
@@ -846,11 +899,12 @@ static unsigned char ov7670_abs_to_sm(unsigned char v)
 static int reg_w(struct sd *sd, __u16 index, __u8 value)
 {
 	int ret;
+	int req = (sd->bridge <= BRIDGE_OV511PLUS) ? 2 : 1;
 
 	sd->gspca_dev.usb_buf[0] = value;
 	ret = usb_control_msg(sd->gspca_dev.dev,
 			usb_sndctrlpipe(sd->gspca_dev.dev, 0),
-			1,			/* REQ_IO (ov518/519) */
+			req,
 			USB_DIR_OUT | USB_TYPE_VENDOR | USB_RECIP_DEVICE,
 			0, index,
 			sd->gspca_dev.usb_buf, 1, 500);
@@ -864,10 +918,11 @@ static int reg_w(struct sd *sd, __u16 index, __u8 value)
 static int reg_r(struct sd *sd, __u16 index)
 {
 	int ret;
+	int req = (sd->bridge <= BRIDGE_OV511PLUS) ? 3 : 1;
 
 	ret = usb_control_msg(sd->gspca_dev.dev,
 			usb_rcvctrlpipe(sd->gspca_dev.dev, 0),
-			1,			/* REQ_IO */
+			req,
 			USB_DIR_IN | USB_TYPE_VENDOR | USB_RECIP_DEVICE,
 			0, index, sd->gspca_dev.usb_buf, 1, 500);
 
@@ -924,6 +979,28 @@ static int reg_w_mask(struct sd *sd,
 }
 
 /*
+ * Writes multiple (n) byte value to a single register. Only valid with certain
+ * registers (0x30 and 0xc4 - 0xce).
+ */
+static int ov518_reg_w32(struct sd *sd, __u16 index, u32 value, int n)
+{
+	int ret;
+
+	*((u32 *)sd->gspca_dev.usb_buf) = __cpu_to_le32(value);
+
+	ret = usb_control_msg(sd->gspca_dev.dev,
+			usb_sndctrlpipe(sd->gspca_dev.dev, 0),
+			1 /* REG_IO */,
+			USB_DIR_OUT | USB_TYPE_VENDOR | USB_RECIP_DEVICE,
+			0, index,
+			sd->gspca_dev.usb_buf, n, 500);
+	if (ret < 0)
+		PDEBUG(D_ERR, "Write reg32 [%02x] %08x failed", index, value);
+	return ret;
+}
+
+
+/*
  * The OV518 I2C I/O procedure is different, hence, this function.
  * This is normally only called from i2c_w(). Note that this function
  * always succeeds regardless of whether the sensor is present and working.
@@ -1014,20 +1091,47 @@ static inline int ov51x_stop(struct sd *sd)
 {
 	PDEBUG(D_STREAM, "stopping");
 	sd->stopped = 1;
-	return reg_w(sd, OV519_SYS_RESET1, 0x0f);
+	switch (sd->bridge) {
+	case BRIDGE_OV511:
+	case BRIDGE_OV511PLUS:
+		return reg_w(sd, R51x_SYS_RESET, 0x3d);
+	case BRIDGE_OV518:
+	case BRIDGE_OV518PLUS:
+		return reg_w_mask(sd, R51x_SYS_RESET, 0x3a, 0x3a);
+	case BRIDGE_OV519:
+		return reg_w(sd, OV519_SYS_RESET1, 0x0f);
+	}
+
+	return 0;
 }
 
 /* Restarts OV511 after ov511_stop() is called. Has no effect if it is not
  * actually stopped (for performance). */
 static inline int ov51x_restart(struct sd *sd)
 {
+	int rc;
+
 	PDEBUG(D_STREAM, "restarting");
 	if (!sd->stopped)
 		return 0;
 	sd->stopped = 0;
 
 	/* Reinitialize the stream */
-	return reg_w(sd, OV519_SYS_RESET1, 0x00);
+	switch (sd->bridge) {
+	case BRIDGE_OV511:
+	case BRIDGE_OV511PLUS:
+		return reg_w(sd, R51x_SYS_RESET, 0x00);
+	case BRIDGE_OV518:
+	case BRIDGE_OV518PLUS:
+		rc = reg_w(sd, 0x2f, 0x80);
+		if (rc < 0)
+			return rc;
+		return reg_w(sd, R51x_SYS_RESET, 0x00);
+	case BRIDGE_OV519:
+		return reg_w(sd, OV519_SYS_RESET1, 0x00);
+	}
+
+	return 0;
 }
 
 /* This does an initial reset of an OmniVision sensor and ensures that I2C
@@ -1287,16 +1391,161 @@ static int ov6xx0_configure(struct sd *sd)
 /* Turns on or off the LED. Only has an effect with OV511+/OV518(+)/OV519 */
 static void ov51x_led_control(struct sd *sd, int on)
 {
-	reg_w_mask(sd, OV519_GPIO_DATA_OUT0, !on, 1);	/* 0 / 1 */
+	switch (sd->bridge) {
+	/* OV511 has no LED control */
+	case BRIDGE_OV511PLUS:
+		reg_w(sd, R511_SYS_LED_CTL, on ? 1 : 0);
+		break;
+	case BRIDGE_OV518:
+	case BRIDGE_OV518PLUS:
+		reg_w_mask(sd, R518_GPIO_OUT, on ? 0x02 : 0x00, 0x02);
+		break;
+	case BRIDGE_OV519:
+		reg_w_mask(sd, OV519_GPIO_DATA_OUT0, !on, 1);	/* 0 / 1 */
+		break;
+	}
 }
 
-/* this function is called at probe time */
-static int sd_config(struct gspca_dev *gspca_dev,
-			const struct usb_device_id *id)
+/* OV518 quantization tables are 8x4 (instead of 8x8) */
+static int ov518_upload_quan_tables(struct sd *sd)
+{
+	const unsigned char yQuanTable518[] = {
+		5, 4, 5, 6, 6, 7, 7, 7,
+		5, 5, 5, 5, 6, 7, 7, 7,
+		6, 6, 6, 6, 7, 7, 7, 8,
+		7, 7, 6, 7, 7, 7, 8, 8
+	};
+
+	const unsigned char uvQuanTable518[] = {
+		6, 6, 6, 7, 7, 7, 7, 7,
+		6, 6, 6, 7, 7, 7, 7, 7,
+		6, 6, 6, 7, 7, 7, 7, 8,
+		7, 7, 7, 7, 7, 7, 8, 8
+	};
+
+	const unsigned char *pYTable = yQuanTable518;
+	const unsigned char *pUVTable = uvQuanTable518;
+	unsigned char val0, val1;
+	int i, rc, reg = R51x_COMP_LUT_BEGIN;
+
+	PDEBUG(D_PROBE, "Uploading quantization tables");
+
+	for (i = 0; i < 16; i++) {
+		val0 = *pYTable++;
+		val1 = *pYTable++;
+		val0 &= 0x0f;
+		val1 &= 0x0f;
+		val0 |= val1 << 4;
+		rc = reg_w(sd, reg, val0);
+		if (rc < 0)
+			return rc;
+
+		val0 = *pUVTable++;
+		val1 = *pUVTable++;
+		val0 &= 0x0f;
+		val1 &= 0x0f;
+		val0 |= val1 << 4;
+		rc = reg_w(sd, reg + 16, val0);
+		if (rc < 0)
+			return rc;
+
+		reg++;
+	}
+
+	return 0;
+}
+
+/* This initializes the OV518/OV518+ and the sensor */
+static int ov518_configure(struct gspca_dev *gspca_dev)
 {
 	struct sd *sd = (struct sd *) gspca_dev;
-	struct cam *cam;
+	int rc;
+
+	/* For 518 and 518+ */
+	static struct ov_regvals init_518[] = {
+		{ R51x_SYS_RESET,	0x40 },
+		{ R51x_SYS_INIT,	0xe1 },
+		{ R51x_SYS_RESET,	0x3e },
+		{ R51x_SYS_INIT,	0xe1 },
+		{ R51x_SYS_RESET,	0x00 },
+		{ R51x_SYS_INIT,	0xe1 },
+		{ 0x46,			0x00 },
+		{ 0x5d,			0x03 },
+	};
+
+	static struct ov_regvals norm_518[] = {
+		{ R51x_SYS_SNAP,	0x02 }, /* Reset */
+		{ R51x_SYS_SNAP,	0x01 }, /* Enable */
+		{ 0x31, 		0x0f },
+		{ 0x5d,			0x03 },
+		{ 0x24,			0x9f },
+		{ 0x25,			0x90 },
+		{ 0x20,			0x00 },
+		{ 0x51,			0x04 },
+		{ 0x71,			0x19 },
+		{ 0x2f,			0x80 },
+	};
+
+	static struct ov_regvals norm_518_p[] = {
+		{ R51x_SYS_SNAP,	0x02 }, /* Reset */
+		{ R51x_SYS_SNAP,	0x01 }, /* Enable */
+		{ 0x31, 		0x0f },
+		{ 0x5d,			0x03 },
+		{ 0x24,			0x9f },
+		{ 0x25,			0x90 },
+		{ 0x20,			0x60 },
+		{ 0x51,			0x02 },
+		{ 0x71,			0x19 },
+		{ 0x40,			0xff },
+		{ 0x41,			0x42 },
+		{ 0x46,			0x00 },
+		{ 0x33,			0x04 },
+		{ 0x21,			0x19 },
+		{ 0x3f,			0x10 },
+		{ 0x2f,			0x80 },
+	};
+
+	/* First 5 bits of custom ID reg are a revision ID on OV518 */
+	PDEBUG(D_PROBE, "Device revision %d",
+	       0x1F & reg_r(sd, R51x_SYS_CUST_ID));
+
+	rc = write_regvals(sd, init_518, ARRAY_SIZE(init_518));
+	if (rc < 0)
+		return rc;
+
+	/* Set LED GPIO pin to output mode */
+	rc = reg_w_mask(sd, R518_GPIO_CTL, 0x00, 0x02);
+	if (rc < 0)
+		return rc;
 
+	switch (sd->bridge) {
+	case BRIDGE_OV518:
+		rc = write_regvals(sd, norm_518, ARRAY_SIZE(norm_518));
+		if (rc < 0)
+			return rc;
+		break;
+	case BRIDGE_OV518PLUS:
+		rc = write_regvals(sd, norm_518_p, ARRAY_SIZE(norm_518_p));
+		if (rc < 0)
+			return rc;
+		break;
+	}
+
+	rc = ov518_upload_quan_tables(sd);
+	if (rc < 0) {
+		PDEBUG(D_ERR, "Error uploading quantization tables");
+		return rc;
+	}
+
+	rc = reg_w(sd, 0x2f, 0x80);
+	if (rc < 0)
+		return rc;
+
+	return 0;
+}
+
+static int ov519_configure(struct sd *sd)
+{
 	static const struct ov_regvals init_519[] = {
 		{ 0x5a,  0x6d }, /* EnableSystem */
 		{ 0x53,  0x9b },
@@ -1313,8 +1562,32 @@ static int sd_config(struct gspca_dev *gspca_dev,
 		/* windows reads 0x55 at this point*/
 	};
 
-	if (write_regvals(sd, init_519, ARRAY_SIZE(init_519)))
+	return write_regvals(sd, init_519, ARRAY_SIZE(init_519));
+}
+
+/* this function is called at probe time */
+static int sd_config(struct gspca_dev *gspca_dev,
+			const struct usb_device_id *id)
+{
+	struct sd *sd = (struct sd *) gspca_dev;
+	struct cam *cam;
+	int ret = 0;
+
+	sd->bridge = id->driver_info;
+
+	switch (sd->bridge) {
+	case BRIDGE_OV518:
+	case BRIDGE_OV518PLUS:
+		ret = ov518_configure(gspca_dev);
+		break;
+	case BRIDGE_OV519:
+		ret = ov519_configure(sd);
+		break;
+	}
+
+	if (ret)
 		goto error;
+
 	ov51x_led_control(sd, 0);	/* turn LED off */
 
 	/* Test for 76xx */
@@ -1360,12 +1633,26 @@ static int sd_config(struct gspca_dev *gspca_dev,
 	}
 
 	cam = &gspca_dev->cam;
-	if (!sd->sif) {
-		cam->cam_mode = vga_mode;
-		cam->nmodes = ARRAY_SIZE(vga_mode);
-	} else {
-		cam->cam_mode = sif_mode;
-		cam->nmodes = ARRAY_SIZE(sif_mode);
+	switch (sd->bridge) {
+	case BRIDGE_OV518:
+	case BRIDGE_OV518PLUS:
+		if (!sd->sif) {
+			cam->cam_mode = ov518_vga_mode;
+			cam->nmodes = ARRAY_SIZE(ov518_vga_mode);
+		} else {
+			cam->cam_mode = ov518_sif_mode;
+			cam->nmodes = ARRAY_SIZE(ov518_sif_mode);
+		}
+		break;
+	case BRIDGE_OV519:
+		if (!sd->sif) {
+			cam->cam_mode = ov519_vga_mode;
+			cam->nmodes = ARRAY_SIZE(ov519_vga_mode);
+		} else {
+			cam->cam_mode = ov519_sif_mode;
+			cam->nmodes = ARRAY_SIZE(ov519_sif_mode);
+		}
+		break;
 	}
 	sd->brightness = BRIGHTNESS_DEF;
 	sd->contrast = CONTRAST_DEF;
@@ -1422,6 +1709,106 @@ static int sd_init(struct gspca_dev *gspca_dev)
 	return 0;
 }
 
+/* Sets up the OV518/OV518+ with the given image parameters
+ *
+ * OV518 needs a completely different approach, until we can figure out what
+ * the individual registers do. Also, only 15 FPS is supported now.
+ *
+ * Do not put any sensor-specific code in here (including I2C I/O functions)
+ */
+static int ov518_mode_init_regs(struct sd *sd)
+{
+	int hsegs, vsegs;
+
+	/******** Set the mode ********/
+
+	reg_w(sd, 0x2b, 0);
+	reg_w(sd, 0x2c, 0);
+	reg_w(sd, 0x2d, 0);
+	reg_w(sd, 0x2e, 0);
+	reg_w(sd, 0x3b, 0);
+	reg_w(sd, 0x3c, 0);
+	reg_w(sd, 0x3d, 0);
+	reg_w(sd, 0x3e, 0);
+
+	if (sd->bridge == BRIDGE_OV518) {
+		/* Set 8-bit (YVYU) input format */
+		reg_w_mask(sd, 0x20, 0x08, 0x08);
+
+		/* Set 12-bit (4:2:0) output format */
+		reg_w_mask(sd, 0x28, 0x80, 0xf0);
+		reg_w_mask(sd, 0x38, 0x80, 0xf0);
+	} else {
+		reg_w(sd, 0x28, 0x80);
+		reg_w(sd, 0x38, 0x80);
+	}
+
+	hsegs = sd->gspca_dev.width / 16;
+	vsegs = sd->gspca_dev.height / 4;
+
+	reg_w(sd, 0x29, hsegs);
+	reg_w(sd, 0x2a, vsegs);
+
+	reg_w(sd, 0x39, hsegs);
+	reg_w(sd, 0x3a, vsegs);
+
+	/* Windows driver does this here; who knows why */
+	reg_w(sd, 0x2f, 0x80);
+
+	/******** Set the framerate (to 30 FPS) ********/
+	if (sd->bridge == BRIDGE_OV518PLUS)
+		sd->clockdiv = 1;
+	else
+		sd->clockdiv = 0;
+
+	/* Mode independent, but framerate dependent, regs */
+	reg_w(sd, 0x51, 0x04);	/* Clock divider; lower==faster */
+	reg_w(sd, 0x22, 0x18);
+	reg_w(sd, 0x23, 0xff);
+
+	if (sd->bridge == BRIDGE_OV518PLUS)
+		reg_w(sd, 0x21, 0x19);
+	else
+		reg_w(sd, 0x71, 0x17);	/* Compression-related? */
+
+	/* FIXME: Sensor-specific */
+	/* Bit 5 is what matters here. Of course, it is "reserved" */
+	i2c_w(sd, 0x54, 0x23);
+
+	reg_w(sd, 0x2f, 0x80);
+
+	if (sd->bridge == BRIDGE_OV518PLUS) {
+		reg_w(sd, 0x24, 0x94);
+		reg_w(sd, 0x25, 0x90);
+		ov518_reg_w32(sd, 0xc4,    400, 2);	/* 190h   */
+		ov518_reg_w32(sd, 0xc6,    540, 2);	/* 21ch   */
+		ov518_reg_w32(sd, 0xc7,    540, 2);	/* 21ch   */
+		ov518_reg_w32(sd, 0xc8,    108, 2);	/* 6ch    */
+		ov518_reg_w32(sd, 0xca, 131098, 3);	/* 2001ah */
+		ov518_reg_w32(sd, 0xcb,    532, 2);	/* 214h   */
+		ov518_reg_w32(sd, 0xcc,   2400, 2);	/* 960h   */
+		ov518_reg_w32(sd, 0xcd,     32, 2);	/* 20h    */
+		ov518_reg_w32(sd, 0xce,    608, 2);	/* 260h   */
+	} else {
+		reg_w(sd, 0x24, 0x9f);
+		reg_w(sd, 0x25, 0x90);
+		ov518_reg_w32(sd, 0xc4,    400, 2);	/* 190h   */
+		ov518_reg_w32(sd, 0xc6,    381, 2);	/* 17dh   */
+		ov518_reg_w32(sd, 0xc7,    381, 2);	/* 17dh   */
+		ov518_reg_w32(sd, 0xc8,    128, 2);	/* 80h    */
+		ov518_reg_w32(sd, 0xca, 183331, 3);	/* 2cc23h */
+		ov518_reg_w32(sd, 0xcb,    746, 2);	/* 2eah   */
+		ov518_reg_w32(sd, 0xcc,   1750, 2);	/* 6d6h   */
+		ov518_reg_w32(sd, 0xcd,     45, 2);	/* 2dh    */
+		ov518_reg_w32(sd, 0xce,    851, 2);	/* 353h   */
+	}
+
+	reg_w(sd, 0x2f, 0x80);
+
+	return 0;
+}
+
+
 /* Sets up the OV519 with the given image parameters
  *
  * OV519 needs a completely different approach, until we can figure out what
@@ -1765,6 +2152,11 @@ static int set_ov_sensor_window(struct sd *sd)
 		hwebase = 0x3a;
 		vwsbase = 0x05;
 		vwebase = 0x06;
+		if (qvga) {
+			/* HDG: this fixes U and V getting swapped */
+			hwsbase--;
+			vwsbase--;
+		}
 		break;
 	case SEN_OV7620:
 		hwsbase = 0x2f;		/* From 7620.SET (spec is wrong) */
@@ -1880,15 +2272,28 @@ static int set_ov_sensor_window(struct sd *sd)
 static int sd_start(struct gspca_dev *gspca_dev)
 {
 	struct sd *sd = (struct sd *) gspca_dev;
-	int ret;
+	int ret = 0;
 
-	ret = ov519_mode_init_regs(sd);
+	switch (sd->bridge) {
+	case BRIDGE_OV518:
+	case BRIDGE_OV518PLUS:
+		ret = ov518_mode_init_regs(sd);
+		break;
+	case BRIDGE_OV519:
+		ret = ov519_mode_init_regs(sd);
+		break;
+	}
 	if (ret < 0)
 		goto out;
+
 	ret = set_ov_sensor_window(sd);
 	if (ret < 0)
 		goto out;
 
+	setcontrast(gspca_dev);
+	setbrightness(gspca_dev);
+	setcolors(gspca_dev);
+
 	ret = ov51x_restart(sd);
 	if (ret < 0)
 		goto out;
@@ -1907,7 +2312,30 @@ static void sd_stopN(struct gspca_dev *gspca_dev)
 	ov51x_led_control(sd, 0);
 }
 
-static void sd_pkt_scan(struct gspca_dev *gspca_dev,
+static void ov518_pkt_scan(struct gspca_dev *gspca_dev,
+			struct gspca_frame *frame,	/* target */
+			__u8 *data,			/* isoc packet */
+			int len)			/* iso packet length */
+{
+	PDEBUG(D_STREAM, "ov518_pkt_scan: %d bytes", len);
+
+	if (len & 7) {
+		len--;
+		PDEBUG(D_STREAM, "packet number: %d\n", (int)data[len]);
+	}
+
+	/* A false positive here is likely, until OVT gives me
+	 * the definitive SOF/EOF format */
+	if ((!(data[0] | data[1] | data[2] | data[3] | data[5])) && data[6]) {
+		gspca_frame_add(gspca_dev, LAST_PACKET, frame, data, 0);
+		gspca_frame_add(gspca_dev, FIRST_PACKET, frame, data, 0);
+	}
+
+	/* intermediate packet */
+	gspca_frame_add(gspca_dev, INTER_PACKET, frame, data, len);
+}
+
+static void ov519_pkt_scan(struct gspca_dev *gspca_dev,
 			struct gspca_frame *frame,	/* target */
 			__u8 *data,			/* isoc packet */
 			int len)			/* iso packet length */
@@ -1951,6 +2379,27 @@ static void sd_pkt_scan(struct gspca_dev *gspca_dev,
 			data, len);
 }
 
+static void sd_pkt_scan(struct gspca_dev *gspca_dev,
+			struct gspca_frame *frame,	/* target */
+			__u8 *data,			/* isoc packet */
+			int len)			/* iso packet length */
+{
+	struct sd *sd = (struct sd *) gspca_dev;
+
+	switch (sd->bridge) {
+	case BRIDGE_OV511:
+	case BRIDGE_OV511PLUS:
+		break;
+	case BRIDGE_OV518:
+	case BRIDGE_OV518PLUS:
+		ov518_pkt_scan(gspca_dev, frame, data, len);
+		break;
+	case BRIDGE_OV519:
+		ov519_pkt_scan(gspca_dev, frame, data, len);
+		break;
+	}
+}
+
 /* -- management routines -- */
 
 static void setbrightness(struct gspca_dev *gspca_dev)
@@ -1995,6 +2444,7 @@ static void setcontrast(struct gspca_dev *gspca_dev)
 		break;
 	case SEN_OV6630:
 		i2c_w_mask(sd, OV7610_REG_CNT, val >> 4, 0x0f);
+		break;
 	case SEN_OV8610: {
 		static const __u8 ctab[] = {
 			0x03, 0x09, 0x0b, 0x0f, 0x53, 0x6f, 0x35, 0x7f
@@ -2161,19 +2611,21 @@ static const struct sd_desc sd_desc = {
 
 /* -- module initialisation -- */
 static const __devinitdata struct usb_device_id device_table[] = {
-	{USB_DEVICE(0x041e, 0x4052)},
-	{USB_DEVICE(0x041e, 0x405f)},
-	{USB_DEVICE(0x041e, 0x4060)},
-	{USB_DEVICE(0x041e, 0x4061)},
-	{USB_DEVICE(0x041e, 0x4064)},
-	{USB_DEVICE(0x041e, 0x4068)},
-	{USB_DEVICE(0x045e, 0x028c)},
-	{USB_DEVICE(0x054c, 0x0154)},
-	{USB_DEVICE(0x054c, 0x0155)},
-	{USB_DEVICE(0x05a9, 0x0519)},
-	{USB_DEVICE(0x05a9, 0x0530)},
-	{USB_DEVICE(0x05a9, 0x4519)},
-	{USB_DEVICE(0x05a9, 0x8519)},
+	{USB_DEVICE(0x041e, 0x4052), .driver_info = BRIDGE_OV519 },
+	{USB_DEVICE(0x041e, 0x405f), .driver_info = BRIDGE_OV519 },
+	{USB_DEVICE(0x041e, 0x4060), .driver_info = BRIDGE_OV519 },
+	{USB_DEVICE(0x041e, 0x4061), .driver_info = BRIDGE_OV519 },
+	{USB_DEVICE(0x041e, 0x4064), .driver_info = BRIDGE_OV519 },
+	{USB_DEVICE(0x041e, 0x4068), .driver_info = BRIDGE_OV519 },
+	{USB_DEVICE(0x045e, 0x028c), .driver_info = BRIDGE_OV519 },
+	{USB_DEVICE(0x054c, 0x0154), .driver_info = BRIDGE_OV519 },
+	{USB_DEVICE(0x054c, 0x0155), .driver_info = BRIDGE_OV519 },
+	{USB_DEVICE(0x05a9, 0x0518), .driver_info = BRIDGE_OV518 },
+	{USB_DEVICE(0x05a9, 0x0519), .driver_info = BRIDGE_OV519 },
+	{USB_DEVICE(0x05a9, 0x0530), .driver_info = BRIDGE_OV519 },
+	{USB_DEVICE(0x05a9, 0x4519), .driver_info = BRIDGE_OV519 },
+	{USB_DEVICE(0x05a9, 0x8519), .driver_info = BRIDGE_OV519 },
+	{USB_DEVICE(0x05a9, 0xa518), .driver_info = BRIDGE_OV518PLUS },
 	{}
 };
 
diff --git a/linux/drivers/media/video/gspca/ov534.c b/linux/drivers/media/video/gspca/ov534.c
index 14341b6be..21a9366c7 100644
--- a/linux/drivers/media/video/gspca/ov534.c
+++ b/linux/drivers/media/video/gspca/ov534.c
@@ -958,9 +958,11 @@ static void sd_pkt_scan(struct gspca_dev *gspca_dev, struct gspca_frame *frame,
 	__u32 this_pts;
 	u16 this_fid;
 	int remaining_len = len;
+	int payload_len;
 
+	payload_len = gspca_dev->cam.bulk ? 2048 : 2040;
 	do {
-		len = min(remaining_len, 2040);		/*fixme: was 2048*/
+		len = min(remaining_len, payload_len);
 
 		/* Payloads are prefixed with a UVC-style header.  We
 		   consider a frame to start when the FID toggles, or the PTS
diff --git a/linux/drivers/media/video/gspca/spca505.c b/linux/drivers/media/video/gspca/spca505.c
index 2acec58b1..ea8c9fe2e 100644
--- a/linux/drivers/media/video/gspca/spca505.c
+++ b/linux/drivers/media/video/gspca/spca505.c
@@ -637,19 +637,19 @@ static int sd_config(struct gspca_dev *gspca_dev,
 		cam->nmodes = ARRAY_SIZE(vga_mode) - 1;
 	sd->brightness = BRIGHTNESS_DEF;
 
-	if (sd->subtype == Nxultra) {
-		if (write_vector(gspca_dev, spca505b_init_data))
-			return -EIO;
-	} else {
-		if (write_vector(gspca_dev, spca505_init_data))
-			return -EIO;
-	}
 	return 0;
 }
 
 /* this function is called at probe and resume time */
 static int sd_init(struct gspca_dev *gspca_dev)
 {
+	struct sd *sd = (struct sd *) gspca_dev;
+
+	if (write_vector(gspca_dev,
+			 sd->subtype == Nxultra
+				? spca505b_init_data
+				: spca505_init_data))
+		return -EIO;
 	return 0;
 }
 
diff --git a/linux/drivers/media/video/ivtv/ivtv-driver.c b/linux/drivers/media/video/ivtv/ivtv-driver.c
index edb81a948..9f91838d7 100644
--- a/linux/drivers/media/video/ivtv/ivtv-driver.c
+++ b/linux/drivers/media/video/ivtv/ivtv-driver.c
@@ -455,7 +455,7 @@ static void ivtv_process_eeprom(struct ivtv *itv)
 			break;
 	}
 	if (tv.tuner_type == TUNER_ABSENT)
-		IVTV_ERR("tveeprom cannot autodetect tuner!");
+		IVTV_ERR("tveeprom cannot autodetect tuner!\n");
 
 	if (itv->options.tuner == -1)
 		itv->options.tuner = tv.tuner_type;
diff --git a/linux/drivers/media/video/ov511.c b/linux/drivers/media/video/ov511.c
index 12d109eaa..2839546b1 100644
--- a/linux/drivers/media/video/ov511.c
+++ b/linux/drivers/media/video/ov511.c
@@ -112,6 +112,8 @@ static int framedrop		= -1;
 static int fastset;
 static int force_palette;
 static int backlight;
+/* Bitmask marking allocated devices from 0 to OV511_MAX_UNIT_VIDEO */
+static unsigned long ov511_devused;
 static int unit_video[OV511_MAX_UNIT_VIDEO];
 static int remove_zeros;
 static int mirror;
@@ -5724,7 +5726,7 @@ ov51x_probe(struct usb_interface *intf, const struct usb_device_id *id)
 	struct usb_device *dev = interface_to_usbdev(intf);
 	struct usb_interface_descriptor *idesc;
 	struct usb_ov511 *ov;
-	int i;
+	int i, rc, nr;
 
 	PDEBUG(1, "probing for device...");
 
@@ -5849,33 +5851,41 @@ ov51x_probe(struct usb_interface *intf, const struct usb_device_id *id)
 	ov->vdev->parent = &intf->dev;
 	video_set_drvdata(ov->vdev, ov);
 
-	for (i = 0; i < OV511_MAX_UNIT_VIDEO; i++) {
-		/* Minor 0 cannot be specified; assume user wants autodetect */
-		if (unit_video[i] == 0)
-			break;
+	mutex_lock(&ov->lock);
 
-		if (video_register_device(ov->vdev, VFL_TYPE_GRABBER,
-			unit_video[i]) >= 0) {
-			break;
-		}
-	}
+	/* Check to see next free device and mark as used */
+	nr = find_first_zero_bit(&ov511_devused, OV511_MAX_UNIT_VIDEO);
+
+	/* Registers device */
+	if (unit_video[nr] != 0)
+		rc = video_register_device(ov->vdev, VFL_TYPE_GRABBER,
+					   unit_video[nr]);
+	else
+		rc = video_register_device(ov->vdev, VFL_TYPE_GRABBER, -1);
 
-	/* Use the next available one */
-	if ((ov->vdev->minor == -1) &&
-	    video_register_device(ov->vdev, VFL_TYPE_GRABBER, -1) < 0) {
+	if (rc < 0) {
 		err("video_register_device failed");
+		mutex_unlock(&ov->lock);
 		goto error;
 	}
 
+	/* Mark device as used */
+	ov511_devused |= 1 << nr;
+	ov->nr = nr;
+
 	dev_info(&intf->dev, "Device at %s registered to minor %d\n",
 		 ov->usb_path, ov->vdev->minor);
 
 	usb_set_intfdata(intf, ov);
 	if (ov_create_sysfs(ov->vdev)) {
 		err("ov_create_sysfs failed");
+		ov511_devused &= ~(1 << nr);
+		mutex_unlock(&ov->lock);
 		goto error;
 	}
 
+	mutex_lock(&ov->lock);
+
 	return 0;
 
 error:
@@ -5910,10 +5920,16 @@ ov51x_disconnect(struct usb_interface *intf)
 
 	PDEBUG(3, "");
 
+	mutex_lock(&ov->lock);
 	usb_set_intfdata (intf, NULL);
 
-	if (!ov)
+	if (!ov) {
+		mutex_unlock(&ov->lock);
 		return;
+	}
+
+	/* Free device number */
+	ov511_devused &= ~(1 << ov->nr);
 
 	if (ov->vdev)
 		video_unregister_device(ov->vdev);
@@ -5931,6 +5947,7 @@ ov51x_disconnect(struct usb_interface *intf)
 
 	ov->streaming = 0;
 	ov51x_unlink_isoc(ov);
+	mutex_unlock(&ov->lock);
 
 	ov->dev = NULL;
 
diff --git a/linux/drivers/media/video/ov511.h b/linux/drivers/media/video/ov511.h
index c303ac5a8..c213d944e 100644
--- a/linux/drivers/media/video/ov511.h
+++ b/linux/drivers/media/video/ov511.h
@@ -495,6 +495,9 @@ struct usb_ov511 {
 	int has_decoder;	/* Device has a video decoder */
 	int pal;		/* Device is designed for PAL resolution */
 
+	/* ov511 device number ID */
+	int nr;			/* Stores a device number */
+
 	/* I2C interface */
 	struct mutex i2c_lock;	  /* Protect I2C controller regs */
 	unsigned char primary_i2c_slave;  /* I2C write id of sensor */
diff --git a/linux/drivers/media/video/pwc/pwc-if.c b/linux/drivers/media/video/pwc/pwc-if.c
index b3765e280..eaeea5520 100644
--- a/linux/drivers/media/video/pwc/pwc-if.c
+++ b/linux/drivers/media/video/pwc/pwc-if.c
@@ -605,7 +605,7 @@ static void pwc_snapshot_button(struct pwc_device *pdev, int down)
 
 #ifdef CONFIG_USB_PWC_INPUT_EVDEV
 	if (pdev->button_dev) {
-		input_report_key(pdev->button_dev, BTN_0, down);
+		input_report_key(pdev->button_dev, KEY_CAMERA, down);
 		input_sync(pdev->button_dev);
 	}
 #endif
@@ -1859,7 +1859,7 @@ static int usb_pwc_probe(struct usb_interface *intf, const struct usb_device_id
 	pdev->button_dev->cdev.dev = &pdev->udev->dev;
 #endif
 	pdev->button_dev->evbit[0] = BIT_MASK(EV_KEY);
-	pdev->button_dev->keybit[BIT_WORD(BTN_0)] = BIT_MASK(BTN_0);
+	pdev->button_dev->keybit[BIT_WORD(KEY_CAMERA)] = BIT_MASK(KEY_CAMERA);
 
 	rc = input_register_device(pdev->button_dev);
 	if (rc) {
diff --git a/linux/drivers/media/video/saa7134/Makefile b/linux/drivers/media/video/saa7134/Makefile
index 3dbaa19a6..604158a8c 100644
--- a/linux/drivers/media/video/saa7134/Makefile
+++ b/linux/drivers/media/video/saa7134/Makefile
@@ -3,8 +3,7 @@ saa7134-objs :=	saa7134-cards.o saa7134-core.o saa7134-i2c.o	\
 		saa7134-ts.o saa7134-tvaudio.o saa7134-vbi.o    \
 		saa7134-video.o saa7134-input.o
 
-obj-$(CONFIG_VIDEO_SAA7134) +=  saa7134.o saa7134-empress.o \
-				saa6752hs.o
+obj-$(CONFIG_VIDEO_SAA7134) +=  saa6752hs.o saa7134.o saa7134-empress.o
 
 obj-$(CONFIG_VIDEO_SAA7134_ALSA) += saa7134-alsa.o
 
diff --git a/linux/drivers/media/video/saa7134/saa7134-cards.c b/linux/drivers/media/video/saa7134/saa7134-cards.c
index 587209fdd..064fb86bc 100644
--- a/linux/drivers/media/video/saa7134/saa7134-cards.c
+++ b/linux/drivers/media/video/saa7134/saa7134-cards.c
@@ -4497,6 +4497,7 @@ struct saa7134_board saa7134_boards[] = {
 		/* Igor Kuznetsov <igk@igk.ru> */
 		/* Andrey Melnikoff <temnota@kmv.ru> */
 		/* Beholder Intl. Ltd. Dmitry Belimov <d.belimov@gmail.com> */
+		/* Alexey Osipov <lion-simba@pridelands.ru> */
 		.name           = "Beholder BeholdTV M6",
 		.audio_clock    = 0x00187de7,
 		.tuner_type     = TUNER_PHILIPS_FM1216ME_MK3,
@@ -4571,6 +4572,7 @@ struct saa7134_board saa7134_boards[] = {
 		/* Igor Kuznetsov <igk@igk.ru> */
 		/* Andrey Melnikoff <temnota@kmv.ru> */
 		/* Beholder Intl. Ltd. Dmitry Belimov <d.belimov@gmail.com> */
+		/* Alexey Osipov <lion-simba@pridelands.ru> */
 		.name           = "Beholder BeholdTV M6 Extra",
 		.audio_clock    = 0x00187de7,
 		.tuner_type     = TUNER_PHILIPS_FM1216ME_MK3, /* FIXME to MK5 */
diff --git a/linux/drivers/media/video/saa7134/saa7134-core.c b/linux/drivers/media/video/saa7134/saa7134-core.c
index dc692d7a7..da73430ad 100644
--- a/linux/drivers/media/video/saa7134/saa7134-core.c
+++ b/linux/drivers/media/video/saa7134/saa7134-core.c
@@ -380,6 +380,10 @@ void saa7134_buffer_next(struct saa7134_dev *dev,
 		dprintk("buffer_next %p\n",NULL);
 		saa7134_set_dmabits(dev);
 		del_timer(&q->timeout);
+
+		if (card_has_mpeg(dev))
+			if (dev->ts_started)
+				saa7134_ts_stop(dev);
 	}
 }
 
@@ -465,6 +469,19 @@ int saa7134_set_dmabits(struct saa7134_dev *dev)
 		ctrl |= SAA7134_MAIN_CTRL_TE5;
 		irq  |= SAA7134_IRQ1_INTE_RA2_1 |
 			SAA7134_IRQ1_INTE_RA2_0;
+
+		/* dma: setup channel 5 (= TS) */
+
+		saa_writeb(SAA7134_TS_DMA0, (dev->ts.nr_packets - 1) & 0xff);
+		saa_writeb(SAA7134_TS_DMA1,
+			((dev->ts.nr_packets - 1) >> 8) & 0xff);
+		/* TSNOPIT=0, TSCOLAP=0 */
+		saa_writeb(SAA7134_TS_DMA2,
+			(((dev->ts.nr_packets - 1) >> 16) & 0x3f) | 0x00);
+		saa_writel(SAA7134_RS_PITCH(5), TS_PACKET_SIZE);
+		saa_writel(SAA7134_RS_CONTROL(5), SAA7134_RS_CONTROL_BURST_16 |
+						  SAA7134_RS_CONTROL_ME |
+						  (dev->ts.pt_ts.dma >> 12));
 	}
 
 	/* set task conditions + field handling */
diff --git a/linux/drivers/media/video/saa7134/saa7134-empress.c b/linux/drivers/media/video/saa7134/saa7134-empress.c
index dd22a5215..96334a20b 100644
--- a/linux/drivers/media/video/saa7134/saa7134-empress.c
+++ b/linux/drivers/media/video/saa7134/saa7134-empress.c
@@ -255,6 +255,16 @@ static int empress_s_fmt_vid_cap(struct file *file, void *priv,
 	return 0;
 }
 
+static int empress_try_fmt_vid_cap(struct file *file, void *priv,
+				struct v4l2_format *f)
+{
+	struct saa7134_dev *dev = file->private_data;
+
+	f->fmt.pix.pixelformat  = V4L2_PIX_FMT_MPEG;
+	f->fmt.pix.sizeimage    = TS_PACKET_SIZE * dev->ts.nr_packets;
+
+	return 0;
+}
 
 static int empress_reqbufs(struct file *file, void *priv,
 					struct v4l2_requestbuffers *p)
@@ -450,6 +460,7 @@ static const struct v4l2_file_operations ts_fops =
 static const struct v4l2_ioctl_ops ts_ioctl_ops = {
 	.vidioc_querycap		= empress_querycap,
 	.vidioc_enum_fmt_vid_cap	= empress_enum_fmt_vid_cap,
+	.vidioc_try_fmt_vid_cap		= empress_try_fmt_vid_cap,
 	.vidioc_s_fmt_vid_cap		= empress_s_fmt_vid_cap,
 	.vidioc_g_fmt_vid_cap		= empress_g_fmt_vid_cap,
 	.vidioc_reqbufs			= empress_reqbufs,
diff --git a/linux/drivers/media/video/saa7134/saa7134-ts.c b/linux/drivers/media/video/saa7134/saa7134-ts.c
index b8ff459d0..3fa652279 100644
--- a/linux/drivers/media/video/saa7134/saa7134-ts.c
+++ b/linux/drivers/media/video/saa7134/saa7134-ts.c
@@ -67,33 +67,8 @@ static int buffer_activate(struct saa7134_dev *dev,
 
 	mod_timer(&dev->ts_q.timeout, jiffies+TS_BUFFER_TIMEOUT);
 
-	if (dev->ts_state == SAA7134_TS_BUFF_DONE) {
-		/* Clear TS cache */
-		dev->buff_cnt = 0;
-		saa_writeb(SAA7134_TS_SERIAL1, 0x00);
-		saa_writeb(SAA7134_TS_SERIAL1, 0x03);
-		saa_writeb(SAA7134_TS_SERIAL1, 0x00);
-		saa_writeb(SAA7134_TS_SERIAL1, 0x01);
-
-		/* TS clock non-inverted */
-		saa_writeb(SAA7134_TS_SERIAL1, 0x00);
-
-		/* Start TS stream */
-		switch (saa7134_boards[dev->board].ts_type) {
-		case SAA7134_MPEG_TS_PARALLEL:
-			saa_writeb(SAA7134_TS_SERIAL0, 0x40);
-			saa_writeb(SAA7134_TS_PARALLEL, 0xec);
-			break;
-		case SAA7134_MPEG_TS_SERIAL:
-			saa_writeb(SAA7134_TS_SERIAL0, 0xd8);
-			saa_writeb(SAA7134_TS_PARALLEL, 0x6c);
-			saa_writeb(SAA7134_TS_PARALLEL_SERIAL, 0xbc);
-			saa_writeb(SAA7134_TS_SERIAL1, 0x02);
-			break;
-		}
-
-		dev->ts_state = SAA7134_TS_STARTED;
-	}
+	if (!dev->ts_started)
+		saa7134_ts_start(dev);
 
 	return 0;
 }
@@ -104,7 +79,6 @@ static int buffer_prepare(struct videobuf_queue *q, struct videobuf_buffer *vb,
 	struct saa7134_dev *dev = q->priv_data;
 	struct saa7134_buf *buf = container_of(vb,struct saa7134_buf,vb);
 	unsigned int lines, llength, size;
-	u32 control;
 	int err;
 
 	dprintk("buffer_prepare [%p,%s]\n",buf,v4l2_field_names[field]);
@@ -121,8 +95,11 @@ static int buffer_prepare(struct videobuf_queue *q, struct videobuf_buffer *vb,
 	}
 
 	if (VIDEOBUF_NEEDS_INIT == buf->vb.state) {
+
 		struct videobuf_dmabuf *dma=videobuf_to_dma(&buf->vb);
 
+		dprintk("buffer_prepare: needs_init\n");
+
 		buf->vb.width  = llength;
 		buf->vb.height = lines;
 		buf->vb.size   = size;
@@ -139,23 +116,6 @@ static int buffer_prepare(struct videobuf_queue *q, struct videobuf_buffer *vb,
 			goto oops;
 	}
 
-	dev->buff_cnt++;
-
-	if (dev->buff_cnt == dev->ts.nr_bufs) {
-		dev->ts_state = SAA7134_TS_BUFF_DONE;
-		/* dma: setup channel 5 (= TS) */
-		control = SAA7134_RS_CONTROL_BURST_16 |
-			SAA7134_RS_CONTROL_ME |
-			(buf->pt->dma >> 12);
-
-		saa_writeb(SAA7134_TS_DMA0, (lines - 1) & 0xff);
-		saa_writeb(SAA7134_TS_DMA1, ((lines - 1) >> 8) & 0xff);
-		/* TSNOPIT=0, TSCOLAP=0 */
-		saa_writeb(SAA7134_TS_DMA2, (((lines - 1) >> 16) & 0x3f) | 0x00);
-		saa_writel(SAA7134_RS_PITCH(5), TS_PACKET_SIZE);
-		saa_writel(SAA7134_RS_CONTROL(5), control);
-	}
-
 	buf->vb.state = VIDEOBUF_PREPARED;
 	buf->activate = buffer_activate;
 	buf->vb.field = field;
@@ -175,8 +135,7 @@ buffer_setup(struct videobuf_queue *q, unsigned int *count, unsigned int *size)
 	if (0 == *count)
 		*count = dev->ts.nr_bufs;
 	*count = saa7134_buffer_count(*size,*count);
-	dev->buff_cnt = 0;
-	dev->ts_state = SAA7134_TS_STOPPED;
+
 	return 0;
 }
 
@@ -193,11 +152,9 @@ static void buffer_release(struct videobuf_queue *q, struct videobuf_buffer *vb)
 	struct saa7134_buf *buf = container_of(vb,struct saa7134_buf,vb);
 	struct saa7134_dev *dev = q->priv_data;
 
-	if (dev->ts_state == SAA7134_TS_STARTED) {
-		/* Stop TS transport */
-		saa_writeb(SAA7134_TS_PARALLEL, 0x6c);
-		dev->ts_state = SAA7134_TS_STOPPED;
-	}
+	if (dev->ts_started)
+		saa7134_ts_stop(dev);
+
 	saa7134_dma_free(q,buf);
 }
 
@@ -214,7 +171,7 @@ EXPORT_SYMBOL_GPL(saa7134_ts_qops);
 
 static unsigned int tsbufs = 8;
 module_param(tsbufs, int, 0444);
-MODULE_PARM_DESC(tsbufs,"number of ts buffers, range 2-32");
+MODULE_PARM_DESC(tsbufs, "number of ts buffers for read/write IO, range 2-32");
 
 static unsigned int ts_nr_packets = 64;
 module_param(ts_nr_packets, int, 0444);
@@ -256,6 +213,7 @@ int saa7134_ts_init1(struct saa7134_dev *dev)
 	dev->ts_q.timeout.data     = (unsigned long)(&dev->ts_q);
 	dev->ts_q.dev              = dev;
 	dev->ts_q.need_two         = 1;
+	dev->ts_started            = 0;
 	saa7134_pgtable_alloc(dev->pci,&dev->ts.pt_ts);
 
 	/* init TS hw */
@@ -264,13 +222,67 @@ int saa7134_ts_init1(struct saa7134_dev *dev)
 	return 0;
 }
 
+/* Function for stop TS */
+int saa7134_ts_stop(struct saa7134_dev *dev)
+{
+	dprintk("TS stop\n");
+
+	BUG_ON(!dev->ts_started);
+
+	/* Stop TS stream */
+	switch (saa7134_boards[dev->board].ts_type) {
+	case SAA7134_MPEG_TS_PARALLEL:
+		saa_writeb(SAA7134_TS_PARALLEL, 0x6c);
+		dev->ts_started = 0;
+		break;
+	case SAA7134_MPEG_TS_SERIAL:
+		saa_writeb(SAA7134_TS_SERIAL0, 0x40);
+		dev->ts_started = 0;
+		break;
+	}
+	return 0;
+}
+
+/* Function for start TS */
+int saa7134_ts_start(struct saa7134_dev *dev)
+{
+	dprintk("TS start\n");
+
+	BUG_ON(dev->ts_started);
+
+	saa_writeb(SAA7134_TS_SERIAL1, 0x00);
+	saa_writeb(SAA7134_TS_SERIAL1, 0x03);
+	saa_writeb(SAA7134_TS_SERIAL1, 0x00);
+	saa_writeb(SAA7134_TS_SERIAL1, 0x01);
+
+	/* TS clock non-inverted */
+	saa_writeb(SAA7134_TS_SERIAL1, 0x00);
+
+	/* Start TS stream */
+	switch (saa7134_boards[dev->board].ts_type) {
+	case SAA7134_MPEG_TS_PARALLEL:
+		saa_writeb(SAA7134_TS_SERIAL0, 0x40);
+		saa_writeb(SAA7134_TS_PARALLEL, 0xec);
+		break;
+	case SAA7134_MPEG_TS_SERIAL:
+		saa_writeb(SAA7134_TS_SERIAL0, 0xd8);
+		saa_writeb(SAA7134_TS_PARALLEL, 0x6c);
+		saa_writeb(SAA7134_TS_PARALLEL_SERIAL, 0xbc);
+		saa_writeb(SAA7134_TS_SERIAL1, 0x02);
+		break;
+	}
+
+	dev->ts_started = 1;
+
+	return 0;
+}
+
 int saa7134_ts_fini(struct saa7134_dev *dev)
 {
 	saa7134_pgtable_free(dev->pci,&dev->ts.pt_ts);
 	return 0;
 }
 
-
 void saa7134_irq_ts_done(struct saa7134_dev *dev, unsigned long status)
 {
 	enum v4l2_field field;
diff --git a/linux/drivers/media/video/saa7134/saa7134.h b/linux/drivers/media/video/saa7134/saa7134.h
index 385bc26bd..454802e73 100644
--- a/linux/drivers/media/video/saa7134/saa7134.h
+++ b/linux/drivers/media/video/saa7134/saa7134.h
@@ -498,12 +498,6 @@ struct saa7134_mpeg_ops {
 	void                       (*signal_change)(struct saa7134_dev *dev);
 };
 
-enum saa7134_ts_status {
-	SAA7134_TS_STOPPED,
-	SAA7134_TS_BUFF_DONE,
-	SAA7134_TS_STARTED,
-};
-
 /* global device status */
 struct saa7134_dev {
 	struct list_head           devlist;
@@ -598,8 +592,7 @@ struct saa7134_dev {
 	/* SAA7134_MPEG_* */
 	struct saa7134_ts          ts;
 	struct saa7134_dmaqueue    ts_q;
-	enum saa7134_ts_status 	   ts_state;
-	unsigned int 		   buff_cnt;
+	int                        ts_started;
 	struct saa7134_mpeg_ops    *mops;
 
 	/* SAA7134_MPEG_EMPRESS only */
@@ -757,6 +750,9 @@ void saa7134_ts_unregister(struct saa7134_mpeg_ops *ops);
 
 int saa7134_ts_init_hw(struct saa7134_dev *dev);
 
+int saa7134_ts_start(struct saa7134_dev *dev);
+int saa7134_ts_stop(struct saa7134_dev *dev);
+
 /* ----------------------------------------------------------- */
 /* saa7134-vbi.c                                               */
 
diff --git a/linux/drivers/media/video/se401.c b/linux/drivers/media/video/se401.c
index cca1cb0c4..9ba500f8d 100644
--- a/linux/drivers/media/video/se401.c
+++ b/linux/drivers/media/video/se401.c
@@ -1252,17 +1252,18 @@ static int se401_init(struct usb_se401 *se401, int button)
 	int i=0, rc;
 	unsigned char cp[0x40];
 	char temp[200];
+	int slen;
 
 	/* led on */
 	se401_sndctrl(1, se401, SE401_REQ_LED_CONTROL, 1, NULL, 0);
 
 	/* get camera descriptor */
 	rc=se401_sndctrl(0, se401, SE401_REQ_GET_CAMERA_DESCRIPTOR, 0, cp, sizeof(cp));
-	if (cp[1]!=0x41) {
+	if (cp[1] != 0x41) {
 		err("Wrong descriptor type");
 		return 1;
 	}
-	sprintf (temp, "ExtraFeatures: %d", cp[3]);
+	slen = snprintf(temp, 200, "ExtraFeatures: %d", cp[3]);
 
 	se401->sizes=cp[4]+cp[5]*256;
 	se401->width=kmalloc(se401->sizes*sizeof(int), GFP_KERNEL);
@@ -1277,9 +1278,10 @@ static int se401_init(struct usb_se401 *se401, int button)
 		    se401->width[i]=cp[6+i*4+0]+cp[6+i*4+1]*256;
 		    se401->height[i]=cp[6+i*4+2]+cp[6+i*4+3]*256;
 	}
-	sprintf (temp, "%s Sizes:", temp);
+	slen += snprintf (temp + slen, 200 - slen, " Sizes:");
 	for (i=0; i<se401->sizes; i++) {
-		sprintf(temp, "%s %dx%d", temp, se401->width[i], se401->height[i]);
+		slen += snprintf(temp + slen, 200 - slen,
+			" %dx%d", se401->width[i], se401->height[i]);
 	}
 	dev_info(&se401->dev->dev, "%s\n", temp);
 	se401->maxframesize=se401->width[se401->sizes-1]*se401->height[se401->sizes-1]*3;
diff --git a/linux/drivers/media/video/tveeprom.c b/linux/drivers/media/video/tveeprom.c
index 7d6459dd2..5e3c9f4e2 100644
--- a/linux/drivers/media/video/tveeprom.c
+++ b/linux/drivers/media/video/tveeprom.c
@@ -185,7 +185,7 @@ hauppauge_tuner[] =
 	{ TUNER_ABSENT,        		"Silicon TDA8275C1 8290 FM"},
 	{ TUNER_ABSENT,        		"Thompson DTT757"},
 	/* 80-89 */
-	{ TUNER_PHILIPS_FM1216ME_MK3, 	"Philips FQ1216LME MK3"},
+	{ TUNER_PHILIPS_FQ1216LME_MK3, 	"Philips FQ1216LME MK3"},
 	{ TUNER_LG_PAL_NEW_TAPC, 	"LG TAPC G701D"},
 	{ TUNER_LG_NTSC_NEW_TAPC, 	"LG TAPC H791F"},
 	{ TUNER_LG_PAL_NEW_TAPC, 	"TCL 2002MB 3"},
@@ -230,7 +230,7 @@ hauppauge_tuner[] =
 	{ TUNER_ABSENT,        		"Samsung THPD5222FG30A"},
 	/* 120-129 */
 	{ TUNER_XC2028,        		"Xceive XC3028"},
-	{ TUNER_ABSENT,        		"Philips FQ1216LME MK5"},
+	{ TUNER_PHILIPS_FQ1216LME_MK3,	"Philips FQ1216LME MK5"},
 	{ TUNER_ABSENT,        		"Philips FQD1216LME"},
 	{ TUNER_ABSENT,        		"Conexant CX24118A"},
 	{ TUNER_ABSENT,        		"TCL DMF11WIP"},
diff --git a/linux/drivers/media/video/tvp514x.c b/linux/drivers/media/video/tvp514x.c
index 4262e60b8..3750f7fad 100644
--- a/linux/drivers/media/video/tvp514x.c
+++ b/linux/drivers/media/video/tvp514x.c
@@ -692,7 +692,7 @@ static int ioctl_s_routing(struct v4l2_int_device *s,
 			break;	/* Input detected */
 	}
 
-	if ((current_std == STD_INVALID) || (try_count <= 0))
+	if ((current_std == STD_INVALID) || (try_count < 0))
 		return -EINVAL;
 
 	decoder->current_std = current_std;
diff --git a/linux/drivers/media/video/usbvideo/konicawc.c b/linux/drivers/media/video/usbvideo/konicawc.c
index 75485168e..07bc85761 100644
--- a/linux/drivers/media/video/usbvideo/konicawc.c
+++ b/linux/drivers/media/video/usbvideo/konicawc.c
@@ -249,7 +249,7 @@ static void konicawc_register_input(struct konicawc *cam, struct usb_device *dev
 #endif
 
 	input_dev->evbit[0] = BIT_MASK(EV_KEY);
-	input_dev->keybit[BIT_WORD(BTN_0)] = BIT_MASK(BTN_0);
+	input_dev->keybit[BIT_WORD(KEY_CAMERA)] = BIT_MASK(KEY_CAMERA);
 
 	error = input_register_device(cam->input);
 	if (error) {
@@ -272,7 +272,7 @@ static void konicawc_unregister_input(struct konicawc *cam)
 static void konicawc_report_buttonstat(struct konicawc *cam)
 {
 	if (cam->input) {
-		input_report_key(cam->input, BTN_0, cam->buttonsts);
+		input_report_key(cam->input, KEY_CAMERA, cam->buttonsts);
 		input_sync(cam->input);
 	}
 }
diff --git a/linux/drivers/media/video/usbvideo/quickcam_messenger.c b/linux/drivers/media/video/usbvideo/quickcam_messenger.c
index f129bea11..ab30ef54a 100644
--- a/linux/drivers/media/video/usbvideo/quickcam_messenger.c
+++ b/linux/drivers/media/video/usbvideo/quickcam_messenger.c
@@ -112,7 +112,7 @@ static void qcm_register_input(struct qcm *cam, struct usb_device *dev)
 #endif
 
 	input_dev->evbit[0] = BIT_MASK(EV_KEY);
-	input_dev->keybit[BIT_WORD(BTN_0)] = BIT_MASK(BTN_0);
+	input_dev->keybit[BIT_WORD(KEY_CAMERA)] = BIT_MASK(KEY_CAMERA);
 
 	error = input_register_device(cam->input);
 	if (error) {
@@ -135,7 +135,7 @@ static void qcm_unregister_input(struct qcm *cam)
 static void qcm_report_buttonstat(struct qcm *cam)
 {
 	if (cam->input) {
-		input_report_key(cam->input, BTN_0, cam->button_sts);
+		input_report_key(cam->input, KEY_CAMERA, cam->button_sts);
 		input_sync(cam->input);
 	}
 }
diff --git a/linux/drivers/media/video/usbvision/usbvision-core.c b/linux/drivers/media/video/usbvision/usbvision-core.c
index 9253ec6dd..baf2e5621 100644
--- a/linux/drivers/media/video/usbvision/usbvision-core.c
+++ b/linux/drivers/media/video/usbvision/usbvision-core.c
@@ -390,10 +390,9 @@ int usbvision_scratch_alloc(struct usb_usbvision *usbvision)
 
 void usbvision_scratch_free(struct usb_usbvision *usbvision)
 {
-	if (usbvision->scratch != NULL) {
-		vfree(usbvision->scratch);
-		usbvision->scratch = NULL;
-	}
+	vfree(usbvision->scratch);
+	usbvision->scratch = NULL;
+
 }
 
 /*
@@ -506,10 +505,9 @@ int usbvision_decompress_alloc(struct usb_usbvision *usbvision)
  */
 void usbvision_decompress_free(struct usb_usbvision *usbvision)
 {
-	if (usbvision->IntraFrameBuffer != NULL) {
-		vfree(usbvision->IntraFrameBuffer);
-		usbvision->IntraFrameBuffer = NULL;
-	}
+	vfree(usbvision->IntraFrameBuffer);
+	usbvision->IntraFrameBuffer = NULL;
+
 }
 
 /************************************************************
diff --git a/linux/drivers/media/video/uvc/uvc_ctrl.c b/linux/drivers/media/video/uvc/uvc_ctrl.c
index 7774ce6b5..ef55bc35a 100644
--- a/linux/drivers/media/video/uvc/uvc_ctrl.c
+++ b/linux/drivers/media/video/uvc/uvc_ctrl.c
@@ -1374,21 +1374,19 @@ end:
 }
 
 /*
- * Prune an entity of its bogus controls. This currently includes processing
- * unit auto controls for which no corresponding manual control is available.
- * Such auto controls make little sense if any, and are known to crash at
- * least the SiGma Micro webcam.
+ * Prune an entity of its bogus controls using a blacklist. Bogus controls
+ * are currently the ones that crash the camera or unconditionally return an
+ * error when queried.
  */
 static void
-uvc_ctrl_prune_entity(struct uvc_entity *entity)
+uvc_ctrl_prune_entity(struct uvc_device *dev, struct uvc_entity *entity)
 {
 	static const struct {
-		u8 idx_manual;
-		u8 idx_auto;
+		struct usb_device_id id;
+		u8 index;
 	} blacklist[] = {
-		{ 2, 11 }, /* Hue */
-		{ 6, 12 }, /* White Balance Temperature */
-		{ 7, 13 }, /* White Balance Component */
+		{ { USB_DEVICE(0x1c4f, 0x3000) }, 6 }, /* WB Temperature */
+		{ { USB_DEVICE(0x5986, 0x0241) }, 2 }, /* Hue */
 	};
 
 	u8 *controls;
@@ -1402,19 +1400,17 @@ uvc_ctrl_prune_entity(struct uvc_entity *entity)
 	size = entity->processing.bControlSize;
 
 	for (i = 0; i < ARRAY_SIZE(blacklist); ++i) {
-		if (blacklist[i].idx_auto >= 8 * size ||
-		    blacklist[i].idx_manual >= 8 * size)
+		if (!usb_match_id(dev->intf, &blacklist[i].id))
 			continue;
 
-		if (!uvc_test_bit(controls, blacklist[i].idx_auto) ||
-		     uvc_test_bit(controls, blacklist[i].idx_manual))
+		if (blacklist[i].index >= 8 * size ||
+		    !uvc_test_bit(controls, blacklist[i].index))
 			continue;
 
-		uvc_trace(UVC_TRACE_CONTROL, "Auto control %u/%u has no "
-			"matching manual control, removing it.\n", entity->id,
-			blacklist[i].idx_auto);
+		uvc_trace(UVC_TRACE_CONTROL, "%u/%u control is black listed, "
+			"removing it.\n", entity->id, blacklist[i].index);
 
-		uvc_clear_bit(controls, blacklist[i].idx_auto);
+		uvc_clear_bit(controls, blacklist[i].index);
 	}
 }
 
@@ -1444,8 +1440,7 @@ int uvc_ctrl_init_device(struct uvc_device *dev)
 			bControlSize = entity->camera.bControlSize;
 		}
 
-		if (dev->quirks & UVC_QUIRK_PRUNE_CONTROLS)
-			uvc_ctrl_prune_entity(entity);
+		uvc_ctrl_prune_entity(dev, entity);
 
 		for (i = 0; i < bControlSize; ++i)
 			ncontrols += hweight8(bmControls[i]);
diff --git a/linux/drivers/media/video/uvc/uvc_driver.c b/linux/drivers/media/video/uvc/uvc_driver.c
index 8d193376c..40df6828f 100644
--- a/linux/drivers/media/video/uvc/uvc_driver.c
+++ b/linux/drivers/media/video/uvc/uvc_driver.c
@@ -644,7 +644,7 @@ static int uvc_parse_streaming(struct uvc_device *dev,
 	_buflen = buflen;
 
 	/* Count the format and frame descriptors. */
-	while (_buflen > 2) {
+	while (_buflen > 2 && _buffer[1] == CS_INTERFACE) {
 		switch (_buffer[2]) {
 		case VS_FORMAT_UNCOMPRESSED:
 		case VS_FORMAT_MJPEG:
@@ -709,7 +709,7 @@ static int uvc_parse_streaming(struct uvc_device *dev,
 	streaming->nformats = nformats;
 
 	/* Parse the format descriptors. */
-	while (buflen > 2) {
+	while (buflen > 2 && buffer[1] == CS_INTERFACE) {
 		switch (buffer[2]) {
 		case VS_FORMAT_UNCOMPRESSED:
 		case VS_FORMAT_MJPEG:
@@ -1919,6 +1919,15 @@ static struct usb_device_id uvc_ids[] = {
 	  .bInterfaceSubClass	= 1,
 	  .bInterfaceProtocol	= 0,
 	  .driver_info		= UVC_QUIRK_STREAM_NO_FID },
+	/* Aveo Technology USB 2.0 Camera */
+	{ .match_flags		= USB_DEVICE_ID_MATCH_DEVICE
+				| USB_DEVICE_ID_MATCH_INT_INFO,
+	  .idVendor		= 0x1871,
+	  .idProduct		= 0x0306,
+	  .bInterfaceClass	= USB_CLASS_VIDEO,
+	  .bInterfaceSubClass	= 1,
+	  .bInterfaceProtocol	= 0,
+	  .driver_info		= UVC_QUIRK_PROBE_EXTRAFIELDS },
 	/* Ecamm Pico iMage */
 	{ .match_flags		= USB_DEVICE_ID_MATCH_DEVICE
 				| USB_DEVICE_ID_MATCH_INT_INFO,
@@ -1928,6 +1937,15 @@ static struct usb_device_id uvc_ids[] = {
 	  .bInterfaceSubClass	= 1,
 	  .bInterfaceProtocol	= 0,
 	  .driver_info		= UVC_QUIRK_PROBE_EXTRAFIELDS },
+	/* FSC WebCam V30S */
+	{ .match_flags		= USB_DEVICE_ID_MATCH_DEVICE
+				| USB_DEVICE_ID_MATCH_INT_INFO,
+	  .idVendor		= 0x18ec,
+	  .idProduct		= 0x3288,
+	  .bInterfaceClass	= USB_CLASS_VIDEO,
+	  .bInterfaceSubClass	= 1,
+	  .bInterfaceProtocol	= 0,
+	  .driver_info		= UVC_QUIRK_PROBE_MINMAX },
 	/* Bodelin ProScopeHR */
 	{ .match_flags		= USB_DEVICE_ID_MATCH_DEVICE
 				| USB_DEVICE_ID_MATCH_DEV_HI
@@ -1948,8 +1966,7 @@ static struct usb_device_id uvc_ids[] = {
 	  .bInterfaceSubClass	= 1,
 	  .bInterfaceProtocol	= 0,
 	  .driver_info		= UVC_QUIRK_PROBE_MINMAX
-				| UVC_QUIRK_IGNORE_SELECTOR_UNIT
-				| UVC_QUIRK_PRUNE_CONTROLS },
+				| UVC_QUIRK_IGNORE_SELECTOR_UNIT },
 	/* Generic USB Video Class */
 	{ USB_INTERFACE_INFO(USB_CLASS_VIDEO, 1, 0) },
 	{}
diff --git a/linux/drivers/media/video/uvc/uvc_queue.c b/linux/drivers/media/video/uvc/uvc_queue.c
index 0155752e4..f854698c4 100644
--- a/linux/drivers/media/video/uvc/uvc_queue.c
+++ b/linux/drivers/media/video/uvc/uvc_queue.c
@@ -172,6 +172,20 @@ int uvc_free_buffers(struct uvc_video_queue *queue)
 	return 0;
 }
 
+/*
+ * Check if buffers have been allocated.
+ */
+int uvc_queue_allocated(struct uvc_video_queue *queue)
+{
+	int allocated;
+
+	mutex_lock(&queue->mutex);
+	allocated = queue->count != 0;
+	mutex_unlock(&queue->mutex);
+
+	return allocated;
+}
+
 static void __uvc_query_buffer(struct uvc_buffer *buf,
 		struct v4l2_buffer *v4l2_buf)
 {
diff --git a/linux/drivers/media/video/uvc/uvc_v4l2.c b/linux/drivers/media/video/uvc/uvc_v4l2.c
index 160c01314..736d8ae23 100644
--- a/linux/drivers/media/video/uvc/uvc_v4l2.c
+++ b/linux/drivers/media/video/uvc/uvc_v4l2.c
@@ -251,7 +251,7 @@ static int uvc_v4l2_set_format(struct uvc_video_device *video,
 	if (fmt->type != video->streaming->type)
 		return -EINVAL;
 
-	if (uvc_queue_streaming(&video->queue))
+	if (uvc_queue_allocated(&video->queue))
 		return -EBUSY;
 
 	ret = uvc_v4l2_try_format(video, fmt, &probe, &format, &frame);
diff --git a/linux/drivers/media/video/uvc/uvcvideo.h b/linux/drivers/media/video/uvc/uvcvideo.h
index 6b254fd39..de13c86f2 100644
--- a/linux/drivers/media/video/uvc/uvcvideo.h
+++ b/linux/drivers/media/video/uvc/uvcvideo.h
@@ -314,7 +314,6 @@ struct uvc_xu_control {
 #define UVC_QUIRK_BUILTIN_ISIGHT	0x00000008
 #define UVC_QUIRK_STREAM_NO_FID		0x00000010
 #define UVC_QUIRK_IGNORE_SELECTOR_UNIT	0x00000020
-#define UVC_QUIRK_PRUNE_CONTROLS	0x00000040
 #define UVC_QUIRK_FIX_BANDWIDTH		0x00000080
 
 /* Format flags */
@@ -749,6 +748,7 @@ extern struct uvc_buffer *uvc_queue_next_buffer(struct uvc_video_queue *queue,
 		struct uvc_buffer *buf);
 extern unsigned int uvc_queue_poll(struct uvc_video_queue *queue,
 		struct file *file, poll_table *wait);
+extern int uvc_queue_allocated(struct uvc_video_queue *queue);
 static inline int uvc_queue_streaming(struct uvc_video_queue *queue)
 {
 	return queue->flags & UVC_QUEUE_STREAMING;
diff --git a/linux/drivers/media/video/v4l2-device.c b/linux/drivers/media/video/v4l2-device.c
index 18d404499..4fa93189d 100644
--- a/linux/drivers/media/video/v4l2-device.c
+++ b/linux/drivers/media/video/v4l2-device.c
@@ -86,7 +86,7 @@ void v4l2_device_unregister(struct v4l2_device *v4l2_dev)
 	/* Unregister subdevs */
 	list_for_each_entry_safe(sd, next, &v4l2_dev->subdevs, list) {
 		v4l2_device_unregister_subdev(sd);
-#if defined(CONFIG_I2C) || defined(CONFIG_I2C_MODULE)
+#if defined(CONFIG_I2C) || (defined(CONFIG_I2C_MODULE) && defined(MODULE))
 #if LINUX_VERSION_CODE >= KERNEL_VERSION(2, 6, 29)
 		if (sd->flags & V4L2_SUBDEV_FL_IS_I2C) {
 			struct i2c_client *client = v4l2_get_subdevdata(sd);
diff --git a/linux/drivers/media/video/videobuf-dma-sg.c b/linux/drivers/media/video/videobuf-dma-sg.c
index 623e2fc12..da83ac706 100644
--- a/linux/drivers/media/video/videobuf-dma-sg.c
+++ b/linux/drivers/media/video/videobuf-dma-sg.c
@@ -253,7 +253,7 @@ int videobuf_dma_map(struct videobuf_queue* q, struct videobuf_dmabuf *dma)
 			vfree(dma->sglist);
 			dma->sglist = NULL;
 			dma->sglen = 0;
-			return -EIO;
+			return -ENOMEM;
 		}
 	}
 	return 0;
diff --git a/linux/drivers/media/video/vino.c b/linux/drivers/media/video/vino.c
index 808d9434d..7c39b43ee 100644
--- a/linux/drivers/media/video/vino.c
+++ b/linux/drivers/media/video/vino.c
@@ -868,9 +868,9 @@ static void vino_sync_buffer(struct vino_framebuffer *fb)
 	dprintk("vino_sync_buffer():\n");
 
 	for (i = 0; i < fb->desc_table.page_count; i++)
-		dma_sync_single(NULL,
-				fb->desc_table.dma_cpu[VINO_PAGE_RATIO * i],
-				PAGE_SIZE, DMA_FROM_DEVICE);
+		dma_sync_single_for_cpu(NULL,
+					fb->desc_table.dma_cpu[VINO_PAGE_RATIO * i],
+					PAGE_SIZE, DMA_FROM_DEVICE);
 }
 
 /* Framebuffer fifo functions (need to be locked externally) */
diff --git a/linux/include/linux/videodev2.h b/linux/include/linux/videodev2.h
index 82f9e723e..a018bb458 100644
--- a/linux/include/linux/videodev2.h
+++ b/linux/include/linux/videodev2.h
@@ -347,7 +347,8 @@ struct v4l2_pix_format {
 #define V4L2_PIX_FMT_MR97310A v4l2_fourcc('M', '3', '1', '0') /* compressed BGGR bayer */
 #define V4L2_PIX_FMT_SQ905C   v4l2_fourcc('9', '0', '5', 'C') /* compressed RGGB bayer */
 #define V4L2_PIX_FMT_PJPG     v4l2_fourcc('P', 'J', 'P', 'G') /* Pixart 73xx JPEG */
-#define V4L2_PIX_FMT_YVYU    v4l2_fourcc('Y', 'V', 'Y', 'U') /* 16  YVU 4:2:2     */
+#define V4L2_PIX_FMT_YVYU     v4l2_fourcc('Y', 'V', 'Y', 'U') /* 16 YVU 4:2:2 */
+#define V4L2_PIX_FMT_OV518    v4l2_fourcc('O', '5', '1', '8') /* ov518 JPEG */
 
 /*
  *	F O R M A T   E N U M E R A T I O N
diff --git a/linux/include/media/tuner.h b/linux/include/media/tuner.h
index 735a2a941..cbf97f45f 100644
--- a/linux/include/media/tuner.h
+++ b/linux/include/media/tuner.h
@@ -125,6 +125,7 @@
 #define TUNER_TCL_MF02GIP_5N		77	/* TCL MF02GIP_5N */
 #define TUNER_PHILIPS_FMD1216MEX_MK3	78
 #define TUNER_PHILIPS_FM1216MK5		79
+#define TUNER_PHILIPS_FQ1216LME_MK3	80	/* Active loopthrough, no FM */
 
 /* tv card specific */
 #define TDA9887_PRESENT 		(1<<0)