converted // to /* these */

Signed-off-by: Michael Krufky <mkrufky@m1k.net>

1 files changed, 130 insertions, 123 deletions

diff --git a/linux/drivers/media/video/bttv-cards.c b/linux/drivers/media/video/bttv-cards.c
index d60e56bee..f1e35c534 100644
--- a/linux/drivers/media/video/bttv-cards.c
+++ b/linux/drivers/media/video/bttv-cards.c
@@ -1,5 +1,5 @@
 /*
-    $Id: bttv-cards.c,v 1.54 2005/07/19 18:26:46 mkrufky Exp $
+    $Id: bttv-cards.c,v 1.55 2005/07/28 02:42:28 mkrufky Exp $
 
     bttv-cards.c
 
@@ -182,10 +182,10 @@ static struct CARD {
  	{ 0xd01810fc, BTTV_GVBCTV5PCI,    "I-O Data Co. GV-BCTV5/PCI" },
 
 	{ 0x001211bd, BTTV_PINNACLE,      "Pinnacle PCTV" },
-	// some cards ship with byteswapped IDs ...
+	/* some cards ship with byteswapped IDs ... */
 	{ 0x1200bd11, BTTV_PINNACLE,      "Pinnacle PCTV [bswap]" },
 	{ 0xff00bd11, BTTV_PINNACLE,      "Pinnacle PCTV [bswap]" },
-	// this seems to happen as well ...
+	/* this seems to happen as well ... */
 	{ 0xff1211bd, BTTV_PINNACLE,      "Pinnacle PCTV" },
 
 	{ 0x3000121a, BTTV_VOODOOTV_FM,   "3Dfx VoodooTV FM/ VoodooTV 200" },
@@ -213,12 +213,12 @@ static struct CARD {
 
 	{ 0x1123153b, BTTV_TERRATVRADIO,  "Terratec TV Radio+" },
 	{ 0x1127153b, BTTV_TERRATV,       "Terratec TV+ (V1.05)"    },
-	// clashes with FlyVideo
-	//{ 0x18521852, BTTV_TERRATV,     "Terratec TV+ (V1.10)"    },
+	/* clashes with FlyVideo
+	 *{ 0x18521852, BTTV_TERRATV,     "Terratec TV+ (V1.10)"    }, */
 	{ 0x1134153b, BTTV_TERRATVALUE,   "Terratec TValue (LR102)" },
-	{ 0x1135153b, BTTV_TERRATVALUER,  "Terratec TValue Radio" }, // LR102
-	{ 0x5018153b, BTTV_TERRATVALUE,   "Terratec TValue" },       // ??
-	{ 0xff3b153b, BTTV_TERRATVALUER,  "Terratec TValue Radio" }, // ??
+	{ 0x1135153b, BTTV_TERRATVALUER,  "Terratec TValue Radio" }, /* LR102 */
+	{ 0x5018153b, BTTV_TERRATVALUE,   "Terratec TValue" },       /* ?? */
+	{ 0xff3b153b, BTTV_TERRATVALUER,  "Terratec TValue Radio" }, /* ?? */
 
 	{ 0x400015b0, BTTV_ZOLTRIX_GENIE, "Zoltrix Genie TV" },
 	{ 0x400a15b0, BTTV_ZOLTRIX_GENIE, "Zoltrix Genie TV" },
@@ -300,10 +300,10 @@ static struct CARD {
 	{ 0x01071805, BTTV_PICOLO_TETRA_CHIP, "Picolo Tetra Chip #3" },
 	{ 0x01081805, BTTV_PICOLO_TETRA_CHIP, "Picolo Tetra Chip #4" },
 
-	// likely broken, vendor id doesn't match the other magic views ...
-	//{ 0xa0fca04f, BTTV_MAGICTVIEW063, "Guillemot Maxi TV Video 3" },
+	/* likely broken, vendor id doesn't match the other magic views ...
+	 * { 0xa0fca04f, BTTV_MAGICTVIEW063, "Guillemot Maxi TV Video 3" }, */
 
-	// DVB cards (using pci function .1 for mpeg data xfer)
+	/* DVB cards (using pci function .1 for mpeg data xfer) */
 	{ 0x01010071, BTTV_NEBULA_DIGITV, "Nebula Electronics DigiTV" },
 	{ 0x07611461, BTTV_AVDVBT_761,    "AverMedia AverTV DVB-T 761" },
 	{ 0x001c11bd, BTTV_PINNACLESAT,   "Pinnacle PCTV Sat" },
@@ -524,10 +524,10 @@ struct tvcard bttv_tvcards[] = {
 	.gpiomask	= 0x01fe00,
 	.muxsel		= { 2, 3, 1, 1},
 #if 0
-	// old
+	/* old */
 	.audiomux	= { 0x01c000, 0, 0x018000, 0x014000, 0x002000, 0 },
 #else
-	// 2003-10-20 by "Anton A. Arapov" <arapov@mail.ru>
+	/* 2003-10-20 by "Anton A. Arapov" <arapov@mail.ru> */
 	.audiomux       = { 0x001e00, 0, 0x018000, 0x014000, 0x002000, 0 },
 #endif
 	.needs_tvaudio	= 1,
@@ -581,7 +581,7 @@ struct tvcard bttv_tvcards[] = {
 },{
 	.name		= "Lifeview FlyVideo 98/ Lucky Star Image World ConferenceTV LR50",
 	.video_inputs	= 4,
-	.audio_inputs	= 2,  // tuner, line in
+	.audio_inputs	= 2,  /* tuner, line in */
 	.tuner		= 0,
 	.svhs		= 2,
 	.gpiomask	= 0x1800,
@@ -728,7 +728,7 @@ struct tvcard bttv_tvcards[] = {
 	.audio_inputs	= 1,
 	.tuner		= 0,
 	.svhs		= 2,
-	.gpiomask	= 0x1800,  //0x8dfe00
+	.gpiomask	= 0x1800,  /* 0x8dfe00 */
 	.muxsel		= { 2, 3, 1, 1},
 	.audiomux	= { 0, 0x0800, 0x1000, 0x1000, 0x1800, 0 },
 	.pll            = PLL_28,
@@ -775,7 +775,7 @@ struct tvcard bttv_tvcards[] = {
 	.audio_inputs	= 1,
 	.tuner		= 0,
 	.svhs		= 2,
-	.muxsel		= { 2, 3, 1, 1, 0}, // TV, CVid, SVid, CVid over SVid connector
+	.muxsel		= { 2, 3, 1, 1, 0}, /* TV, CVid, SVid, CVid over SVid connector */
 #if 0
 	.gpiomask	= 0xc33000,
 	.audiomux	= { 0x422000,0x1000,0x0000,0x620000,0x800000 },
@@ -798,7 +798,7 @@ struct tvcard bttv_tvcards[] = {
 	.needs_tvaudio	= 0,
 	.pll		= PLL_28,
 	.has_radio	= 1,
-	.tuner_type	= 5, // default for now, gpio reads BFFF06 for Pal bg+dk
+	.tuner_type	= 5, /* default for now, gpio reads BFFF06 for Pal bg+dk */
 	.audio_hook	= winfast2000_audio,
 	.has_remote     = 1,
 },{
@@ -1278,21 +1278,21 @@ struct tvcard bttv_tvcards[] = {
 },{
 
 /* ---- card 0x44 ---------------------------------- */
-        .name           = "3Dfx VoodooTV FM (Euro), VoodooTV 200 (USA)",
-	// try "insmod msp3400 simple=0" if you have
-	// sound problems with this card.
-        .video_inputs   = 4,
-        .audio_inputs   = 1,
-        .tuner          = 0,
-        .svhs           = -1,
-        .gpiomask       = 0x4f8a00,
-	// 0x100000: 1=MSP enabled (0=disable again)
-	// 0x010000: Connected to "S0" on tda9880 (0=Pal/BG, 1=NTSC)
-        .audiomux       = {0x947fff, 0x987fff,0x947fff,0x947fff, 0x947fff},
-	// tvtuner, radio,   external,internal, mute,  stereo
-	/* tuner, Composit, SVid, Composit-on-Svid-adapter*/
-        .muxsel         = { 2, 3 ,0 ,1},
-        .tuner_type     = TUNER_MT2032,
+	.name           = "3Dfx VoodooTV FM (Euro), VoodooTV 200 (USA)",
+	/* try "insmod msp3400 simple=0" if you have
+	 * sound problems with this card. */
+	.video_inputs   = 4,
+	.audio_inputs   = 1,
+	.tuner          = 0,
+	.svhs           = -1,
+	.gpiomask       = 0x4f8a00,
+	/* 0x100000: 1=MSP enabled (0=disable again)
+	 * 0x010000: Connected to "S0" on tda9880 (0=Pal/BG, 1=NTSC) */
+	.audiomux       = {0x947fff, 0x987fff,0x947fff,0x947fff, 0x947fff},
+	/* tvtuner, radio,   external,internal, mute,  stereo
+	 * tuner, Composit, SVid, Composit-on-Svid-adapter */
+	.muxsel         = { 2, 3 ,0 ,1},
+	.tuner_type     = TUNER_MT2032,
 	.pll		= PLL_28,
 	.has_radio	= 1,
 },{
@@ -1314,7 +1314,7 @@ struct tvcard bttv_tvcards[] = {
         .svhs           = 2,
         .gpiomask       = 15,
         .muxsel         = { 2, 3, 1, 1},
-        .audiomux       = { 0, 0, 11, 7, 13, 0}, // TV and Radio with same GPIO !
+        .audiomux       = { 0, 0, 11, 7, 13, 0}, /* TV and Radio with same GPIO ! */
         .needs_tvaudio  = 1,
         .pll            = PLL_28,
         .tuner_type     = 25,
@@ -1332,7 +1332,7 @@ struct tvcard bttv_tvcards[] = {
 	.audio_inputs   = 0,
 	.tuner		= -1,
 	.svhs		= 2,
-	.muxsel		= { 2, 3, 1, 1}, // AV1, AV2, SVHS, CVid adapter on SVHS
+	.muxsel		= { 2, 3, 1, 1}, /* AV1, AV2, SVHS, CVid adapter on SVHS */
 	.pll		= PLL_28,
 	.no_msp34xx	= 1,
 },{
@@ -1352,8 +1352,8 @@ struct tvcard bttv_tvcards[] = {
 	.no_tda9875	= 1,
 	.pll		= PLL_28,
 	.tuner_type	= 5,
-	.audio_hook	= pvbt878p9b_audio, // Note: not all cards have stereo
-	.has_radio	= 1,  // Note: not all cards have radio
+	.audio_hook	= pvbt878p9b_audio, /* Note: not all cards have stereo */
+	.has_radio	= 1,  /* Note: not all cards have radio */
 	.has_remote     = 1,
 	/* GPIO wiring:
 		GPIO0: A0 hef4052
@@ -1396,7 +1396,7 @@ struct tvcard bttv_tvcards[] = {
         .audio_inputs   = 2,
 	.tuner		= 0,
         .svhs           = 2,
-        .gpiomask       = 0x1C800F,  // Bit0-2: Audio select, 8-12:remote control 14:remote valid 15:remote reset
+        .gpiomask       = 0x1C800F,  /* Bit0-2: Audio select, 8-12:remote control 14:remote valid 15:remote reset */
         .muxsel         = { 2, 1, 1, },
         .audiomux       = { 0, 1, 2, 2, 4 },
         .needs_tvaudio  = 0,
@@ -1437,19 +1437,21 @@ struct tvcard bttv_tvcards[] = {
         .tuner          = 0,
         .svhs           = 2,
         .gpiomask       = 7,
-        .muxsel         = { 2, 3, 1, 1 },   // Tuner, SVid, SVHS, SVid to SVHS connector
-        .audiomux       = { 0 ,0 ,4, 4,4,4},// Yes, this tuner uses the same audio output for TV and FM radio!
-					  // This card lacks external Audio In, so we mute it on Ext. & Int.
-					  // The PCB can take a sbx1637/sbx1673, wiring unknown.
-					  // This card lacks PCI subsystem ID, sigh.
-					  // audiomux=1: lower volume, 2+3: mute
-					  // btwincap uses 0x80000/0x80003
+        .muxsel         = { 2, 3, 1, 1 },   /* Tuner, SVid, SVHS, SVid to SVHS connector */
+        .audiomux       = { 0 ,0 ,4, 4,4,4},/* Yes, this tuner uses the same audio output for TV and FM radio!
+					     * This card lacks external Audio In, so we mute it on Ext. & Int.
+					     * The PCB can take a sbx1637/sbx1673, wiring unknown.
+					     * This card lacks PCI subsystem ID, sigh.
+					     * audiomux=1: lower volume, 2+3: mute
+					     * btwincap uses 0x80000/0x80003
+					     */
         .needs_tvaudio  = 0,
         .no_msp34xx     = 1,
         .pll            = PLL_28,
-        .tuner_type     = 5, // Samsung TCPA9095PC27A (BG+DK), philips compatible, w/FM, stereo and
-			   // radio signal strength indicators work fine.
-	.has_radio		= 1,
+        .tuner_type     = 5,
+	/* Samsung TCPA9095PC27A (BG+DK), philips compatible, w/FM, stereo and
+	   radio signal strength indicators work fine. */
+	.has_radio	= 1,
 	/* GPIO Info:
 		GPIO0,1:   HEF4052 A0,A1
 		GPIO2:     HEF4052 nENABLE
@@ -1679,7 +1681,7 @@ struct tvcard bttv_tvcards[] = {
         .tuner          = 0,
         .svhs           = 3,
         .gpiomask       = 2,
-	// TV, Comp1, Composite over SVID con, SVID
+	/* TV, Comp1, Composite over SVID con, SVID */
         .muxsel         = { 2, 3, 1, 1},
         .audiomux       = { 2, 2, 0, 0, 0 },
         .pll            = PLL_28,
@@ -1778,7 +1780,7 @@ struct tvcard bttv_tvcards[] = {
         .audio_inputs   = 1,
         .tuner          = 0,
         .svhs           = 2,
-        .muxsel         = { 2, 3, 1, 1}, // Tuner, CVid, SVid, CVid over SVid connector
+        .muxsel         = { 2, 3, 1, 1}, /* Tuner, CVid, SVid, CVid over SVid connector */
         .gpiomask       = 0,
         .no_tda9875     = 1,
         .no_tda7432     = 1,
@@ -1788,7 +1790,9 @@ struct tvcard bttv_tvcards[] = {
         /* Bt878, Bt832, FI1246 tuner; no pci subsystem id
            only internal line out: (4pin header) RGGL
            Radio must be decoded by msp3410d (not routed through)*/
-        //         .digital_mode   = DIGITAL_MODE_CAMERA, // todo!
+        /*
+	  .digital_mode   = DIGITAL_MODE_CAMERA,  todo!
+	*/
 },{
         /* Chris Willing <chris@vislab.usyd.edu.au> */
         .name           = "IVC-200",
@@ -1951,8 +1955,8 @@ struct tvcard bttv_tvcards[] = {
 	.video_inputs   = 3,
 	.audio_inputs   = 0,
 	.svhs           = 1,
-	.tuner          = -1, // no tuner
-	.muxsel         = { 3, 1, 1, 3}, // Vid In, SVid In, Vid over SVid in connector
+	.tuner          = -1,
+	.muxsel         = { 3, 1, 1, 3}, /* Vid In, SVid In, Vid over SVid in connector */
         .no_msp34xx     = 1,
         .no_tda9875     = 1,
         .no_tda7432     = 1,
@@ -2177,7 +2181,9 @@ struct tvcard bttv_tvcards[] = {
 	.pll            = PLL_28,
 	.tuner_type     = TUNER_PHILIPS_NTSC_M,
 	.has_radio      = 0,
-	// .has_remote     = 1,
+#if 0
+	.has_remote     = 1,
+#endif
 },{
 	/* Rick C <cryptdragoon@gmail.com> */
         .name           = "Super TV Tuner",
@@ -2192,19 +2198,19 @@ struct tvcard bttv_tvcards[] = {
         .needs_tvaudio  = 1,
         .has_radio      = 1,
 },{
-		/* Chris Fanning <video4linux@haydon.net> */
-		.name           = "Tibet Systems 'Progress DVR' CS16",
-		.video_inputs   = 16,
-		.audio_inputs   = 0,
-		.tuner          = -1,
-		.svhs           = -1,
-		.muxsel         = { 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2 },
-		.pll		= PLL_28,
-		.no_msp34xx     = 1,
-		.no_tda9875     = 1,
-		.no_tda7432	= 1,
-		.tuner_type     = -1,
-		.muxsel_hook    = tibetCS16_muxsel,
+	/* Chris Fanning <video4linux@haydon.net> */
+	.name           = "Tibet Systems 'Progress DVR' CS16",
+	.video_inputs   = 16,
+	.audio_inputs   = 0,
+	.tuner          = -1,
+	.svhs           = -1,
+	.muxsel         = { 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2 },
+	.pll		= PLL_28,
+	.no_msp34xx     = 1,
+	.no_tda9875     = 1,
+	.no_tda7432	= 1,
+	.tuner_type     = -1,
+	.muxsel_hook    = tibetCS16_muxsel,
 },
 {
 	/* Bill Brack <wbrack@mmm.com.hk> */
@@ -2387,32 +2393,32 @@ static void flyvideo_gpio(struct bttv *btv)
 	int tuner=-1,ttype;
 
 	gpio_inout(0xffffff, 0);
-	udelay(8);  // without this we would see the 0x1800 mask
+	udelay(8);  /* without this we would see the 0x1800 mask */
 	gpio = gpio_read();
 	/* FIXME: must restore OUR_EN ??? */
 
-	// all cards provide GPIO info, some have an additional eeprom
-	// LR50: GPIO coding can be found lower right CP1 .. CP9
-	//       CP9=GPIO23 .. CP1=GPIO15; when OPEN, the corresponding GPIO reads 1.
-	//       GPIO14-12: n.c.
-	// LR90: GP9=GPIO23 .. GP1=GPIO15 (right above the bt878)
-
-	// lowest 3 bytes are remote control codes (no handshake needed)
-        // xxxFFF: No remote control chip soldered
-        // xxxF00(LR26/LR50), xxxFE0(LR90): Remote control chip (LVA001 or CF45) soldered
-	// Note: Some bits are Audio_Mask !
+	/* all cards provide GPIO info, some have an additional eeprom
+	 * LR50: GPIO coding can be found lower right CP1 .. CP9
+	 *       CP9=GPIO23 .. CP1=GPIO15; when OPEN, the corresponding GPIO reads 1.
+	 *       GPIO14-12: n.c.
+	 * LR90: GP9=GPIO23 .. GP1=GPIO15 (right above the bt878)
 
+	 * lowest 3 bytes are remote control codes (no handshake needed)
+	 * xxxFFF: No remote control chip soldered
+	 * xxxF00(LR26/LR50), xxxFE0(LR90): Remote control chip (LVA001 or CF45) soldered
+	 * Note: Some bits are Audio_Mask !
+	 */
 	ttype=(gpio&0x0f0000)>>16;
 	switch(ttype) {
-	case 0x0: tuner=2; // NTSC, e.g. TPI8NSR11P
+	case 0x0: tuner=2; /* NTSC, e.g. TPI8NSR11P */
 		break;
-        case 0x2: tuner=39;// LG NTSC (newer TAPC series) TAPC-H701P
+        case 0x2: tuner=39;/* LG NTSC (newer TAPC series) TAPC-H701P */
 		break;
-	case 0x4: tuner=5; // Philips PAL TPI8PSB02P, TPI8PSB12P, TPI8PSB12D or FI1216, FM1216
+	case 0x4: tuner=5; /* Philips PAL TPI8PSB02P, TPI8PSB12P, TPI8PSB12D or FI1216, FM1216 */
 		break;
-	case 0x6: tuner=37; // LG PAL (newer TAPC series) TAPC-G702P
+	case 0x6: tuner=37;/* LG PAL (newer TAPC series) TAPC-G702P */
 		break;
-	case 0xC: tuner=3; // Philips SECAM(+PAL) FQ1216ME or FI1216MF
+		case 0xC: tuner=3; /* Philips SECAM(+PAL) FQ1216ME or FI1216MF */
 		break;
 	default:
 		printk(KERN_INFO "bttv%d: FlyVideo_gpio: unknown tuner type.\n", btv->c.nr);
@@ -2420,15 +2426,16 @@ static void flyvideo_gpio(struct bttv *btv)
 
 	has_remote          =   gpio & 0x800000;
 	has_radio	    =   gpio & 0x400000;
-	//   unknown                   0x200000;
-	//   unknown2                  0x100000;
-        is_capture_only     = !(gpio & 0x008000); //GPIO15
+	/*   unknown                   0x200000;
+	 *   unknown2                  0x100000; */
+        is_capture_only     = !(gpio & 0x008000); /* GPIO15 */
 	has_tda9820_tda9821 = !(gpio & 0x004000);
-	is_lr90             = !(gpio & 0x002000); // else LR26/LR50 (LR38/LR51 f. capture only)
-        //		        gpio & 0x001000 // output bit for audio routing
+	is_lr90             = !(gpio & 0x002000); /* else LR26/LR50 (LR38/LR51 f. capture only) */
+	/*
+	 * gpio & 0x001000    output bit for audio routing */
 
 	if(is_capture_only)
-		tuner=4; // No tuner present
+		tuner=4; /* No tuner present */
 
 	printk(KERN_INFO "bttv%d: FlyVideo Radio=%s RemoteControl=%s Tuner=%d gpio=0x%06x\n",
 	       btv->c.nr, has_radio? "yes":"no ", has_remote? "yes":"no ", tuner, gpio);
@@ -2436,15 +2443,15 @@ static void flyvideo_gpio(struct bttv *btv)
 		btv->c.nr, is_lr90?"yes":"no ", has_tda9820_tda9821?"yes":"no ",
 		is_capture_only?"yes":"no ");
 
-	if(tuner!= -1) // only set if known tuner autodetected, else let insmod option through
+	if(tuner!= -1) /* only set if known tuner autodetected, else let insmod option through */
 		btv->tuner_type = tuner;
 	btv->has_radio = has_radio;
 
-	// LR90 Audio Routing is done by 2 hef4052, so Audio_Mask has 4 bits: 0x001c80
-        // LR26/LR50 only has 1 hef4052, Audio_Mask 0x000c00
-	// Audio options: from tuner, from tda9821/tda9821(mono,stereo,sap), from tda9874, ext., mute
+	/* LR90 Audio Routing is done by 2 hef4052, so Audio_Mask has 4 bits: 0x001c80
+	 * LR26/LR50 only has 1 hef4052, Audio_Mask 0x000c00
+	 * Audio options: from tuner, from tda9821/tda9821(mono,stereo,sap), from tda9874, ext., mute */
 	if(has_tda9820_tda9821) btv->audio_hook = lt9415_audio;
-	//todo: if(has_tda9874) btv->audio_hook = fv2000s_audio;
+	/* todo: if(has_tda9874) btv->audio_hook = fv2000s_audio; */
 }
 
 static int miro_tunermap[] = { 0,6,2,3,   4,5,6,0,  3,0,4,5,  5,2,16,1,
@@ -2943,7 +2950,7 @@ static int terratec_active_radio_upgrade(struct bttv *btv)
 	btv->mbox_csel    = 1 << 10;
 
 	freq=88000/62.5;
-	tea5757_write(btv, 5 * freq + 0x358); // write 0x1ed8
+	tea5757_write(btv, 5 * freq + 0x358); /* write 0x1ed8 */
 	if (0x1ed8 == tea5757_read(btv)) {
 		printk("bttv%d: Terratec Active Radio Upgrade found.\n",
 		       btv->c.nr);
@@ -3118,7 +3125,7 @@ static void __devinit osprey_eeprom(struct bttv *btv)
 	       case 0x0060:
 	       case 0x0070:
 		       btv->c.type = BTTV_OSPREY2x0;
-		       //enable output on select control lines
+		       /* enable output on select control lines */
 		       gpio_inout(0xffffff,0x000303);
 		       break;
 	       default:
@@ -3158,7 +3165,7 @@ static int tuner_1_table[] = {
         TUNER_TEMIC_NTSC,  TUNER_TEMIC_PAL,
 	TUNER_TEMIC_PAL,   TUNER_TEMIC_PAL,
 	TUNER_TEMIC_PAL,   TUNER_TEMIC_PAL,
-        TUNER_TEMIC_4012FY5, TUNER_TEMIC_4012FY5, //TUNER_TEMIC_SECAM
+        TUNER_TEMIC_4012FY5, TUNER_TEMIC_4012FY5, /* TUNER_TEMIC_SECAM */
         TUNER_TEMIC_4012FY5, TUNER_TEMIC_PAL};
 
 static void __devinit avermedia_eeprom(struct bttv *btv)
@@ -3179,7 +3186,7 @@ static void __devinit avermedia_eeprom(struct bttv *btv)
 
 	if (tuner_make == 4)
 		if(tuner_format == 0x09)
-			tuner = TUNER_LG_NTSC_NEW_TAPC; // TAPC-G702P
+			tuner = TUNER_LG_NTSC_NEW_TAPC; /* TAPC-G702P */
 
 	printk(KERN_INFO "bttv%d: Avermedia eeprom[0x%02x%02x]: tuner=",
 		btv->c.nr,eeprom_data[0x41],eeprom_data[0x42]);
@@ -3196,7 +3203,7 @@ static void __devinit avermedia_eeprom(struct bttv *btv)
 /* used on Voodoo TV/FM (Voodoo 200), S0 wired to 0x10000 */
 void bttv_tda9880_setnorm(struct bttv *btv, int norm)
 {
-	// fix up our card entry
+	/* fix up our card entry */
 	if(norm==VIDEO_MODE_NTSC) {
 		bttv_tvcards[BTTV_VOODOOTV_FM].audiomux[0]=0x957fff;
 		bttv_tvcards[BTTV_VOODOOTV_FM].audiomux[4]=0x957fff;
@@ -3207,7 +3214,7 @@ void bttv_tda9880_setnorm(struct bttv *btv, int norm)
                 bttv_tvcards[BTTV_VOODOOTV_FM].audiomux[4]=0x947fff;
 		dprintk("bttv_tda9880_setnorm to PAL\n");
 	}
-	// set GPIO according
+	/* set GPIO according */
 	gpio_bits(bttv_tvcards[btv->c.type].gpiomask,
 		  bttv_tvcards[btv->c.type].audiomux[btv->audio]);
 }
@@ -3264,8 +3271,8 @@ static void __devinit boot_bt832(struct bttv *btv)
 	gpio_bits(resetbit, 0);
 	udelay(5);
 
-	// bt832 on pixelview changes from i2c 0x8a to 0x88 after
-	// being reset as above. So we must follow by this:
+	/* bt832 on pixelview changes from i2c 0x8a to 0x88 after
+	 * being reset as above. So we must follow by this: */
 	bttv_call_i2c_clients(btv, BT832_REATTACH, NULL);
 #endif
 }
@@ -3530,7 +3537,7 @@ static int tea5757_read(struct bttv *btv)
 	udelay(10);
 	timeout= jiffies + HZ;
 
-	// wait for DATA line to go low; error if it doesn't
+	/* wait for DATA line to go low; error if it doesn't */
 	while (bus_in(btv,btv->mbox_data) && time_before(jiffies, timeout))
 		schedule();
 	if (bus_in(btv,btv->mbox_data)) {
@@ -3662,8 +3669,8 @@ gvbctv3pci_audio(struct bttv *btv, struct video_audio *v, int set)
 			con = 0x300;
 		if (v->mode & VIDEO_SOUND_STEREO)
 			con = 0x200;
-//		if (v->mode & VIDEO_SOUND_MONO)
-//			con = 0x100;
+/*		if (v->mode & VIDEO_SOUND_MONO)
+ *			con = 0x100; */
 		gpio_bits(0x300, con);
 	} else {
 		v->mode = VIDEO_SOUND_STEREO |
@@ -3811,7 +3818,7 @@ lt9415_audio(struct bttv *btv, struct video_audio *v, int set)
         }
 }
 
-// TDA9821 on TerraTV+ Bt848, Bt878
+/* TDA9821 on TerraTV+ Bt848, Bt878 */
 static void
 terratv_audio(struct bttv *btv, struct video_audio *v, int set)
 {
@@ -3921,7 +3928,7 @@ fv2000s_audio(struct bttv *btv, struct video_audio *v, int set)
 		}
 		if ((v->mode & (VIDEO_SOUND_LANG1 | VIDEO_SOUND_LANG2))
 		    || (v->mode & VIDEO_SOUND_STEREO)) {
-			val = 0x1080; //-dk-???: 0x0880, 0x0080, 0x1800 ...
+			val = 0x1080; /*-dk-???: 0x0880, 0x0080, 0x1800 ... */
 		}
 		if (val != 0xffff) {
 			gpio_bits(0x1800, val);
@@ -3972,10 +3979,10 @@ adtvk503_audio(struct bttv *btv, struct video_audio *v, int set)
 {
 	unsigned int con = 0xffffff;
 
-	//btaor(0x1e0000, ~0x1e0000, BT848_GPIO_OUT_EN);
+	/* btaor(0x1e0000, ~0x1e0000, BT848_GPIO_OUT_EN); */
 
 	if (set) {
-		//btor(***, BT848_GPIO_OUT_EN);
+		/* btor(***, BT848_GPIO_OUT_EN); */
 		if (v->mode & VIDEO_SOUND_LANG1)
 			con = 0x00000000;
 		if (v->mode & VIDEO_SOUND_LANG2)
@@ -4182,14 +4189,14 @@ static void kodicom4400r_init(struct bttv *btv)
 	master[btv->c.nr+2] = btv;
 }
 
-// The Grandtec X-Guard framegrabber card uses two Dual 4-channel
-// video multiplexers to provide up to 16 video inputs. These
-// multiplexers are controlled by the lower 8 GPIO pins of the
-// bt878. The multiplexers probably Pericom PI5V331Q or similar.
-
-// xxx0 is pin xxx of multiplexer U5,
-// yyy1 is pin yyy of multiplexer U2
+/* The Grandtec X-Guard framegrabber card uses two Dual 4-channel
+ * video multiplexers to provide up to 16 video inputs. These
+ * multiplexers are controlled by the lower 8 GPIO pins of the
+ * bt878. The multiplexers probably Pericom PI5V331Q or similar.
 
+ * xxx0 is pin xxx of multiplexer U5,
+ * yyy1 is pin yyy of multiplexer U2
+ */
 #define ENA0    0x01
 #define ENB0    0x02
 #define ENA1    0x04
@@ -4260,14 +4267,14 @@ static void picolo_tetra_muxsel (struct bttv* btv, unsigned int input)
 
 static void ivc120_muxsel(struct bttv *btv, unsigned int input)
 {
-	// Simple maths
+	/* Simple maths */
 	int key = input % 4;
 	int matrix = input / 4;
 
 	dprintk("bttv%d: ivc120_muxsel: Input - %02d | TDA - %02d | In - %02d\n",
 		btv->c.nr, input, matrix, key);
 
-	// Handles the input selection on the TDA8540's
+	/* Handles the input selection on the TDA8540's */
 	bttv_I2CWrite(btv, I2C_TDA8540_ALT3, 0x00,
 		      ((matrix == 3) ? (key | key << 2) : 0x00), 1);
 	bttv_I2CWrite(btv, I2C_TDA8540_ALT4, 0x00,
@@ -4277,17 +4284,17 @@ static void ivc120_muxsel(struct bttv *btv, unsigned int input)
 	bttv_I2CWrite(btv, I2C_TDA8540_ALT6, 0x00,
 		      ((matrix == 2) ? (key | key << 2) : 0x00), 1);
 
-	// Handles the output enables on the TDA8540's
+	/* Handles the output enables on the TDA8540's */
 	bttv_I2CWrite(btv, I2C_TDA8540_ALT3, 0x02,
-		      ((matrix == 3) ? 0x03 : 0x00), 1);  // 13 - 16
+		      ((matrix == 3) ? 0x03 : 0x00), 1);  /* 13 - 16 */
 	bttv_I2CWrite(btv, I2C_TDA8540_ALT4, 0x02,
-		      ((matrix == 0) ? 0x03 : 0x00), 1);  // 1-4
+		      ((matrix == 0) ? 0x03 : 0x00), 1);  /* 1-4 */
 	bttv_I2CWrite(btv, I2C_TDA8540_ALT5, 0x02,
-		      ((matrix == 1) ? 0x03 : 0x00), 1);  // 5-8
+		      ((matrix == 1) ? 0x03 : 0x00), 1);  /* 5-8 */
 	bttv_I2CWrite(btv, I2C_TDA8540_ALT6, 0x02,
-		      ((matrix == 2) ? 0x03 : 0x00), 1);  // 9-12
+		      ((matrix == 2) ? 0x03 : 0x00), 1);  /* 9-12 */
 
-	// Selects MUX0 for input on the 878
+	/* Selects MUX0 for input on the 878 */
 	btaor((0)<<5, ~(3<<5), BT848_IFORM);
 }