diff options
| -rw-r--r-- | linux/drivers/media/dvb/b2c2/flexcop-fe-tuner.c | 196 |
1 files changed, 113 insertions, 83 deletions
diff --git a/linux/drivers/media/dvb/b2c2/flexcop-fe-tuner.c b/linux/drivers/media/dvb/b2c2/flexcop-fe-tuner.c index 3f485bf13..efb4a6c2b 100644 --- a/linux/drivers/media/dvb/b2c2/flexcop-fe-tuner.c +++ b/linux/drivers/media/dvb/b2c2/flexcop-fe-tuner.c @@ -175,23 +175,23 @@ static int skystar23_samsung_tbdu18132_tuner_set_params(struct dvb_frontend *fe, return 0; } -static void skystar2_rev23_attach(struct flexcop_device *fc, +static int skystar2_rev23_attach(struct flexcop_device *fc, struct i2c_adapter *i2c) { - fc->fe = dvb_attach(mt312_attach, - &skystar23_samsung_tbdu18132_config, i2c); + fc->fe = dvb_attach(mt312_attach, &skystar23_samsung_tbdu18132_config, i2c); if (fc->fe != NULL) { struct dvb_frontend_ops *ops = &fc->fe->ops; - ops->tuner_ops.set_params \ - = skystar23_samsung_tbdu18132_tuner_set_params; + ops->tuner_ops.set_params = + skystar23_samsung_tbdu18132_tuner_set_params; ops->diseqc_send_master_cmd = flexcop_diseqc_send_master_cmd; ops->diseqc_send_burst = flexcop_diseqc_send_burst; ops->set_tone = flexcop_set_tone; ops->set_voltage = flexcop_set_voltage; fc->fe_sleep = ops->sleep; ops->sleep = flexcop_sleep; - fc->dev_type = FC_SKY_REV23; + return 1; } + return 0; } #endif @@ -307,7 +307,7 @@ static struct stv0299_config samsung_tbmu24112_config = { .set_symbol_rate = samsung_tbmu24112_set_symbol_rate, }; -static void skystar2_rev26_attach(struct flexcop_device *fc, +static int skystar2_rev26_attach(struct flexcop_device *fc, struct i2c_adapter *i2c) { fc->fe = dvb_attach(stv0299_attach, &samsung_tbmu24112_config, i2c); @@ -317,7 +317,9 @@ static void skystar2_rev26_attach(struct flexcop_device *fc, ops->set_voltage = flexcop_set_voltage; fc->fe_sleep = ops->sleep; ops->sleep = flexcop_sleep; + return 1; } + return 0; } #endif @@ -334,43 +336,54 @@ static struct itd1000_config skystar2_rev2_7_itd1000_config = { .i2c_address = 0x61, }; -static void skystar2_rev27_attach(struct flexcop_device *fc, +static int skystar2_rev27_attach(struct flexcop_device *fc, struct i2c_adapter *i2c) { + flexcop_ibi_value r108; + struct i2c_adapter *i2c_tuner; + /* enable no_base_addr - no repeated start when reading */ fc->fc_i2c_adap[0].no_base_addr = 1; - fc->fe = dvb_attach(s5h1420_attach, - &skystar2_rev2_7_s5h1420_config, i2c); - if (fc->fe != NULL) { - flexcop_ibi_value r108; - struct i2c_adapter *i2c_tuner \ - = s5h1420_get_tuner_i2c_adapter(fc->fe); - struct dvb_frontend_ops *ops = &fc->fe->ops; + fc->fe = dvb_attach(s5h1420_attach, &skystar2_rev2_7_s5h1420_config, + i2c); + if (!fc->fe) + goto fail; - fc->fe_sleep = ops->sleep; - ops->sleep = flexcop_sleep; - - /* enable no_base_addr - no repeated start when reading */ - fc->fc_i2c_adap[2].no_base_addr = 1; - if (dvb_attach(isl6421_attach, fc->fe, - &fc->fc_i2c_adap[2].i2c_adap, 0x08, 1, 1) == NULL) - err("ISL6421 could NOT be attached"); - else - info("ISL6421 successfully attached"); - - /* the ITD1000 requires a lower i2c clock - is it a problem ? */ - r108.raw = 0x00000506; - fc->write_ibi_reg(fc, tw_sm_c_108, r108); - if (i2c_tuner) { - if (dvb_attach(itd1000_attach, fc->fe, i2c_tuner, - &skystar2_rev2_7_itd1000_config) == NULL) - err("ITD1000 could NOT be attached"); - else - info("ITD1000 successfully attached"); - } - } else - fc->fc_i2c_adap[0].no_base_addr = 0; - /* for the next devices we need it again */ + i2c_tuner = s5h1420_get_tuner_i2c_adapter(fc->fe); + if (!i2c_tuner) + goto fail; + + fc->fe_sleep = fc->fe->ops.sleep; + fc->fe->ops.sleep = flexcop_sleep; + + /* enable no_base_addr - no repeated start when reading */ + fc->fc_i2c_adap[2].no_base_addr = 1; + if (!dvb_attach(isl6421_attach, fc->fe, &fc->fc_i2c_adap[2].i2c_adap, + 0x08, 1, 1)) { + err("ISL6421 could NOT be attached"); + goto fail_isl; + } + info("ISL6421 successfully attached"); + + /* the ITD1000 requires a lower i2c clock - is it a problem ? */ + r108.raw = 0x00000506; + fc->write_ibi_reg(fc, tw_sm_c_108, r108); + if (!dvb_attach(itd1000_attach, fc->fe, i2c_tuner, + &skystar2_rev2_7_itd1000_config)) { + err("ITD1000 could NOT be attached"); + /* Should i2c clock be restored? */ + goto fail_isl; + } + info("ITD1000 successfully attached"); + + return 1; + +fail_isl: + fc->fc_i2c_adap[2].no_base_addr = 0; +fail: + /* for the next devices we need it again */ + fc->fc_i2c_adap[0].no_base_addr = 0; + return 0; } #endif @@ -387,32 +400,38 @@ static const struct cx24113_config skystar2_rev2_8_cx24113_config = { .xtal_khz = 10111, }; -static void skystar2_rev28_attach(struct flexcop_device *fc, +static int skystar2_rev28_attach(struct flexcop_device *fc, struct i2c_adapter *i2c) { - fc->fe = dvb_attach(cx24123_attach, - &skystar2_rev2_8_cx24123_config, i2c); - if (fc->fe != NULL) { - struct i2c_adapter *i2c_tuner \ - = cx24123_get_tuner_i2c_adapter(fc->fe); - if (i2c_tuner != NULL) { - if (dvb_attach(cx24113_attach, fc->fe, - &skystar2_rev2_8_cx24113_config, - i2c_tuner) == NULL) - err("CX24113 could NOT be attached"); - else - info("CX24113 successfully attached"); - } + struct i2c_adapter *i2c_tuner; + + fc->fe = dvb_attach(cx24123_attach, &skystar2_rev2_8_cx24123_config, + i2c); + if (!fc->fe) + return 0; + + i2c_tuner = cx24123_get_tuner_i2c_adapter(fc->fe);; + if (!i2c_tuner) + return 0; - fc->fc_i2c_adap[2].no_base_addr = 1; - if (dvb_attach(isl6421_attach, fc->fe, - &fc->fc_i2c_adap[2].i2c_adap, 0x08, 0, 0) == NULL) - err("ISL6421 could NOT be attached"); - else - info("ISL6421 successfully attached"); + if (!dvb_attach(cx24113_attach, fc->fe, &skystar2_rev2_8_cx24113_config, + i2c_tuner)) { + err("CX24113 could NOT be attached"); + return 0; + } + info("CX24113 successfully attached"); + + fc->fc_i2c_adap[2].no_base_addr = 1; + if (!dvb_attach(isl6421_attach, fc->fe, &fc->fc_i2c_adap[2].i2c_adap, + 0x08, 0, 0)) { + err("ISL6421 could NOT be attached"); + fc->fc_i2c_adap[2].no_base_addr = 0; + return 0; + } + info("ISL6421 successfully attached"); /* TODO on i2c_adap[1] addr 0x11 (EEPROM) there seems to be an * IR-receiver (PIC16F818) - but the card has no input for that ??? */ - } + return 1; } #endif @@ -466,12 +485,15 @@ static struct mt352_config samsung_tdtc9251dh0_config = { .demod_init = samsung_tdtc9251dh0_demod_init, }; -static void airstar_dvbt_attach(struct flexcop_device *fc, +static int airstar_dvbt_attach(struct flexcop_device *fc, struct i2c_adapter *i2c) { fc->fe = dvb_attach(mt352_attach, &samsung_tdtc9251dh0_config, i2c); - if (fc->fe != NULL) + if (fc->fe != NULL) { fc->fe->ops.tuner_ops.calc_regs = samsung_tdtc9251dh0_calc_regs; + return 1; + } + return 0; } #endif @@ -489,10 +511,11 @@ static struct bcm3510_config air2pc_atsc_first_gen_config = { .request_firmware = flexcop_fe_request_firmware, }; -static void airstar_atsc1_attach(struct flexcop_device *fc, +static int airstar_atsc1_attach(struct flexcop_device *fc, struct i2c_adapter *i2c) { fc->fe = dvb_attach(bcm3510_attach, &air2pc_atsc_first_gen_config, i2c); + return fc->fe != NULL; } #endif @@ -502,13 +525,15 @@ static struct nxt200x_config samsung_tbmv_config = { .demod_address = 0x0a, }; -static void airstar_atsc2_attach(struct flexcop_device *fc, +static int airstar_atsc2_attach(struct flexcop_device *fc, struct i2c_adapter *i2c) { fc->fe = dvb_attach(nxt200x_attach, &samsung_tbmv_config, i2c); - if (fc->fe != NULL) - dvb_attach(dvb_pll_attach, fc->fe, 0x61, NULL, - DVB_PLL_SAMSUNG_TBMV); + if (!fc->fe) + return 0; + + return !!dvb_attach(dvb_pll_attach, fc->fe, 0x61, NULL, + DVB_PLL_SAMSUNG_TBMV); } #endif @@ -521,14 +546,15 @@ static struct lgdt330x_config air2pc_atsc_hd5000_config = { .clock_polarity_flip = 1, }; -static void airstar_atsc3_attach(struct flexcop_device *fc, +static int airstar_atsc3_attach(struct flexcop_device *fc, struct i2c_adapter *i2c) { fc->fe = dvb_attach(lgdt330x_attach, &air2pc_atsc_hd5000_config, i2c); - if (fc->fe != NULL) { - dvb_attach(simple_tuner_attach, fc->fe, i2c, 0x61, - TUNER_LG_TDVS_H06XF); - } + if (!fc->fe) + return 0; + + return !!dvb_attach(simple_tuner_attach, fc->fe, i2c, 0x61, + TUNER_LG_TDVS_H06XF); } #endif @@ -659,22 +685,24 @@ static struct stv0297_config alps_tdee4_stv0297_config = { .inittab = alps_tdee4_stv0297_inittab, }; -static void cablestar2_attach(struct flexcop_device *fc, +static int cablestar2_attach(struct flexcop_device *fc, struct i2c_adapter *i2c) { fc->fc_i2c_adap[0].no_base_addr = 1; fc->fe = dvb_attach(stv0297_attach, &alps_tdee4_stv0297_config, i2c); - if (fc->fe != NULL) - fc->fe->ops.tuner_ops.set_params \ - = alps_tdee4_stv0297_tuner_set_params; - else + if (!fc->fe) { + /* Reset for next frontend to try */ fc->fc_i2c_adap[0].no_base_addr = 0; + return 0; + } + fc->fe->ops.tuner_ops.set_params = alps_tdee4_stv0297_tuner_set_params; + return 1; } #endif static struct { flexcop_device_type_t type; - void (*attach)(struct flexcop_device *, struct i2c_adapter *); + int (*attach)(struct flexcop_device *, struct i2c_adapter *); } flexcop_frontends[] = { #if defined(CONFIG_DVB_S5H1420_MODULE) { FC_SKY_REV27, skystar2_rev27_attach }, @@ -713,9 +741,13 @@ int flexcop_frontend_init(struct flexcop_device *fc) /* type needs to be set before, because of some workarounds * done based on the probed card type */ fc->dev_type = flexcop_frontends[i].type; - flexcop_frontends[i].attach(fc, &fc->fc_i2c_adap[0].i2c_adap); - if (fc->fe != NULL) + if (flexcop_frontends[i].attach(fc, &fc->fc_i2c_adap[0].i2c_adap)) goto fe_found; + /* Clean up partially attached frontend */ + if (fc->fe) { + dvb_frontend_detach(fc->fe); + fc->fe = NULL; + } } fc->dev_type = FC_UNK; err("no frontend driver found for this B2C2/FlexCop adapter"); @@ -724,10 +756,8 @@ int flexcop_frontend_init(struct flexcop_device *fc) fe_found: info("found '%s' .", fc->fe->ops.info.name); if (dvb_register_frontend(&fc->dvb_adapter, fc->fe)) { - struct dvb_frontend_ops *ops = &fc->fe->ops; err("frontend registration failed!"); - if (ops->release != NULL) - ops->release(fc->fe); + dvb_frontend_detach(fc->fe); fc->fe = NULL; return -EINVAL; } |