diff options
| -rw-r--r-- | dvb-spec/channel | 104 |
1 files changed, 0 insertions, 104 deletions
diff --git a/dvb-spec/channel b/dvb-spec/channel deleted file mode 100644 index f17e8cb19..000000000 --- a/dvb-spec/channel +++ /dev/null @@ -1,104 +0,0 @@ -This file describes the format of the new channel config file. - -Comments start with # -Each section starts with one of the identifiers: LNB, DISEQC, ROTOR, ... - -IDs are either the official transponder, network, etc. id if it exists -and is unique, otherwise it is just a consecutive number assigned by -the application. -An LNB can also describe a cable TV outlet or a terrestrial antenna. -Names (as all parameters in brackets) are optional. In this case the -application should use the ID as name. - -The application should offer selection sorted by channel number, network, -satellite, bouquet. - - -# satellite definition -SAT - ID satid # ID = xxxy, sat is at position xxx.y degrees - [NAME name] - LNBID lnbid # LNB this sat is received with - [ROTORID rotorid] # rotor commands to position it on this sat - -# LNB definition -LNB - ID lnbid - [NAME name] - [INPUT input] # input of card which the lnb is connected to (default 0) - TYPE type # LNB, CATV or terrestrial antenna? - LOF1 offset1 # local oscillator frequency 1 - LOF2 offset2 # local oscillator frequency 2 - SLOF switchfreq # switching frequency - [DISEQCNR diseqcnr] # simple 2- or 4-switch DiSEqC - [DISEQCID diseqcid] - [INPUT input] - [SWITCHID switchid] - -# A transponder definition -TRANSPONDER - ID tpid - TYPE type # digital (DVB-S(1), C(2) or T(3)) or analog(0) ? - SATID satid - [NAME name] # if analog this is the channel name - FREQ freq - POL H/V - [QAM qam] # only needed if DVB-C - [SRATE sr] # only if DVB - [FEC fec] # only if DVB - [PICID picid] # picture attributes for all channels on this transponder - -# channel definition (only if DVB) -CHANNEL - ID channelid - [NAME name] - TPID tpid - TYPE type - PNR pnr - VPID vpid - APID apid - TPID tpid - [PMTPID pmtpid] - [PCRPID pcrpid] - [APID apid2 APID apid3 ... APID apidn] # more audio PIDs for several languages - [AC3PID ac3] - [NETWID networkid] - [BOUQID bouquetid] - [PICID picid] - -# network definition -NETWORK - ID nwid - [NAME name] - -# bouquet definition -BOUQUET - ID bqid - [NAME name] - - - -# These will be implemented later - -# DiSEqC command sequence -DISEQC - ID disid - [NAME name] - MESSAGE data1 [ ... datan ] BURST 0/1 END - [MESSAGE data1 [ ... datan ] BURST 0/1 END ...] - -# DiSEqC switch -SWITCH - ID switchid - SWITCHID switchid # next "higher" switch - [NAME name] - MESSAGE data1 [ ... datan ] BURST 0/1 END - - -# DiSEqC rotor command sequence leading to a certain rotor position -ROTOR - ID rotid - POS degrees - MESSAGE data1 [ ... datan ] BURST 0/1 END - [MESSAGE data1 [ ... datan ] BURST 0/1 END ...] - |