summaryrefslogtreecommitdiff
diff options
context:
space:
mode:
Diffstat
-rw-r--r--linux/arch/arm/mach-pxa/pcm990-baseboard.c33
-rw-r--r--linux/drivers/media/dvb/dvb-usb/af9015.c27
-rw-r--r--linux/drivers/media/dvb/dvb-usb/anysee.c30
-rw-r--r--linux/drivers/media/dvb/dvb-usb/dvb-usb-ids.h1
-rw-r--r--linux/drivers/media/dvb/frontends/af9013.c4
-rw-r--r--linux/drivers/media/dvb/frontends/au8522.c133
-rw-r--r--linux/drivers/media/dvb/frontends/au8522.h17
-rw-r--r--linux/drivers/media/radio/dsbr100.c8
-rw-r--r--linux/drivers/media/radio/radio-mr800.c3
-rw-r--r--linux/drivers/media/radio/radio-zoltrix.c17
-rw-r--r--linux/drivers/media/video/au0828/au0828-dvb.c39
-rw-r--r--linux/drivers/media/video/pxa_camera.c12
-rw-r--r--linux/drivers/media/video/saa7134/saa7134-alsa.c13
-rw-r--r--linux/firmware/Makefile1
-rw-r--r--linux/sound/pci/bt87x.c5
-rw-r--r--v4l/compat.h13
16 files changed, 286 insertions, 70 deletions
diff --git a/linux/arch/arm/mach-pxa/pcm990-baseboard.c b/linux/arch/arm/mach-pxa/pcm990-baseboard.c
index 973370295..e8eb8cbc3 100644
--- a/linux/arch/arm/mach-pxa/pcm990-baseboard.c
+++ b/linux/arch/arm/mach-pxa/pcm990-baseboard.c
@@ -280,8 +280,7 @@ static void pcm990_irq_handler(unsigned int irq, struct irq_desc *desc)
GPIO_bit(PCM990_CTRL_INT_IRQ_GPIO);
if (likely(pending)) {
irq = PCM027_IRQ(0) + __ffs(pending);
- desc = irq_desc + irq;
- desc_handle_irq(irq, desc);
+ generic_handle_irq(irq);
}
pending = (~PCM990_INTSETCLR) & pcm990_irq_enabled;
} while (pending);
@@ -346,36 +345,10 @@ static struct pxamci_platform_data pcm990_mci_platform_data = {
.exit = pcm990_mci_exit,
};
-/*
- * init OHCI hardware to work with
- *
- * Note: Only USB port 1 (host only) is connected
- *
- * GPIO88 (USBHPWR#1): overcurrent in, overcurrent when low
- * GPIO89 (USBHPEN#1): power-on out, on when low
- */
-static int pcm990_ohci_init(struct device *dev)
-{
- /*
- * disable USB port 2 and 3
- * power sense is active low
- */
- UHCHR = ((UHCHR) | UHCHR_PCPL | UHCHR_PSPL | UHCHR_SSEP2 |
- UHCHR_SSEP3) & ~(UHCHR_SSEP1 | UHCHR_SSE);
- /*
- * wait 10ms after Power on
- * overcurrent per port
- * power switch per port
- */
- UHCRHDA = (5<<24) | (1<<11) | (1<<8); /* FIXME: Required? */
-
- return 0;
-}
-
static struct pxaohci_platform_data pcm990_ohci_platform_data = {
.port_mode = PMM_PERPORT_MODE,
- .init = pcm990_ohci_init,
- .exit = NULL,
+ .flags = ENABLE_PORT1 | POWER_CONTROL_LOW | POWER_SENSE_LOW,
+ .power_on_delay = 10,
};
/*
diff --git a/linux/drivers/media/dvb/dvb-usb/af9015.c b/linux/drivers/media/dvb/dvb-usb/af9015.c
index 776d01d4a..64d2d0f8c 100644
--- a/linux/drivers/media/dvb/dvb-usb/af9015.c
+++ b/linux/drivers/media/dvb/dvb-usb/af9015.c
@@ -54,7 +54,6 @@ static struct af9013_config af9015_af9013_config[] = {
.output_mode = AF9013_OUTPUT_MODE_USB,
.api_version = { 0, 1, 9, 0 },
.gpio[0] = AF9013_GPIO_HI,
- .gpio[1] = AF9013_GPIO_LO,
.gpio[3] = AF9013_GPIO_TUNER_ON,
}, {
@@ -662,7 +661,7 @@ static int af9015_download_firmware(struct usb_device *udev,
len = remainder;
req.data_len = len;
- req.data = (fw->data + i * FW_PACKET_MAX_DATA);
+ req.data = (u8 *)(fw->data + i * FW_PACKET_MAX_DATA);
req.addr = addr;
addr += FW_PACKET_MAX_DATA;
@@ -673,7 +672,6 @@ static int af9015_download_firmware(struct usb_device *udev,
goto error;
}
}
- #undef FW_PACKET_MAX_DATA
/* firmware loaded, request boot */
req.cmd = BOOT;
@@ -744,7 +742,7 @@ static int af9015_read_config(struct usb_device *udev)
}
} else {
switch (udev->descriptor.idVendor) {
- case cpu_to_le16(USB_VID_LEADTEK):
+ case USB_VID_LEADTEK:
af9015_properties[i].rc_key_map =
af9015_rc_keys_leadtek;
af9015_properties[i].rc_key_map_size =
@@ -754,9 +752,9 @@ static int af9015_read_config(struct usb_device *udev)
af9015_config.ir_table_size =
ARRAY_SIZE(af9015_ir_table_leadtek);
break;
- case cpu_to_le16(USB_VID_VISIONPLUS):
+ case USB_VID_VISIONPLUS:
if (udev->descriptor.idProduct ==
- cpu_to_le16(USB_PID_AZUREWAVE_AD_TU700)) {
+ USB_PID_AZUREWAVE_AD_TU700) {
af9015_properties[i].rc_key_map =
af9015_rc_keys_twinhan;
af9015_properties[i].rc_key_map_size =
@@ -767,7 +765,7 @@ static int af9015_read_config(struct usb_device *udev)
ARRAY_SIZE(af9015_ir_table_twinhan);
}
break;
- case cpu_to_le16(USB_VID_KWORLD_2):
+ case USB_VID_KWORLD_2:
/* TODO: use correct rc keys */
af9015_properties[i].rc_key_map =
af9015_rc_keys_twinhan;
@@ -780,7 +778,7 @@ static int af9015_read_config(struct usb_device *udev)
/* Check USB manufacturer and product strings and try
to determine correct remote in case of chip vendor
reference IDs are used. */
- case cpu_to_le16(USB_VID_AFATECH):
+ case USB_VID_AFATECH:
memset(manufacturer, 0, sizeof(manufacturer));
usb_string(udev, udev->descriptor.iManufacturer,
manufacturer, sizeof(manufacturer));
@@ -1089,7 +1087,7 @@ static struct mxl5005s_config af9015_mxl5003_config = {
.xtal_freq = CRYSTAL_FREQ_16000000HZ,
.agc_mode = MXL_SINGLE_AGC,
.tracking_filter = MXL_TF_DEFAULT,
- .rssi_enable = MXL_RSSI_DISABLE,
+ .rssi_enable = MXL_RSSI_ENABLE,
.cap_select = MXL_CAP_SEL_ENABLE,
.div_out = MXL_DIV_OUT_4,
.clock_out = MXL_CLOCK_OUT_DISABLE,
@@ -1106,7 +1104,7 @@ static struct mxl5005s_config af9015_mxl5005_config = {
.xtal_freq = CRYSTAL_FREQ_16000000HZ,
.agc_mode = MXL_SINGLE_AGC,
.tracking_filter = MXL_TF_OFF,
- .rssi_enable = MXL_RSSI_DISABLE,
+ .rssi_enable = MXL_RSSI_ENABLE,
.cap_select = MXL_CAP_SEL_ENABLE,
.div_out = MXL_DIV_OUT_4,
.clock_out = MXL_CLOCK_OUT_DISABLE,
@@ -1198,6 +1196,7 @@ static struct usb_device_id af9015_usb_table[] = {
{USB_DEVICE(USB_VID_AVERMEDIA, USB_PID_AVERMEDIA_VOLAR_X_2)},
{USB_DEVICE(USB_VID_TELESTAR, USB_PID_TELESTAR_STARSTICK_2)},
{USB_DEVICE(USB_VID_AVERMEDIA, USB_PID_AVERMEDIA_A309)},
+/* 15 */{USB_DEVICE(USB_VID_MSI_2, USB_PID_MSI_DIGI_VOX_MINI_III)},
{0},
};
MODULE_DEVICE_TABLE(usb, af9015_usb_table);
@@ -1348,7 +1347,7 @@ static struct dvb_usb_device_properties af9015_properties[] = {
.i2c_algo = &af9015_i2c_algo,
- .num_device_descs = 5,
+ .num_device_descs = 6,
.devices = {
{
.name = "Xtensions XD-380",
@@ -1375,10 +1374,14 @@ static struct dvb_usb_device_properties af9015_properties[] = {
.cold_ids = {&af9015_usb_table[14], NULL},
.warm_ids = {NULL},
},
+ {
+ .name = "MSI Digi VOX mini III",
+ .cold_ids = {&af9015_usb_table[15], NULL},
+ .warm_ids = {NULL},
+ },
}
}
};
-#undef AF9015_DEFAULT_PROPERTIES
static int af9015_usb_probe(struct usb_interface *intf,
const struct usb_device_id *id)
diff --git a/linux/drivers/media/dvb/dvb-usb/anysee.c b/linux/drivers/media/dvb/dvb-usb/anysee.c
index 2f408d2e1..c786359fb 100644
--- a/linux/drivers/media/dvb/dvb-usb/anysee.c
+++ b/linux/drivers/media/dvb/dvb-usb/anysee.c
@@ -41,6 +41,9 @@
static int dvb_usb_anysee_debug;
module_param_named(debug, dvb_usb_anysee_debug, int, 0644);
MODULE_PARM_DESC(debug, "set debugging level" DVB_USB_DEBUG_STATUS);
+int dvb_usb_anysee_delsys;
+module_param_named(delsys, dvb_usb_anysee_delsys, int, 0644);
+MODULE_PARM_DESC(delsys, "select delivery mode (0=DVB-C, 1=DVB-T)");
DVB_DEFINE_MOD_OPT_ADAPTER_NR(adapter_nr);
static struct mutex anysee_usb_mutex;
@@ -178,14 +181,14 @@ static int anysee_master_xfer(struct i2c_adapter *adap, struct i2c_msg *msg,
inc = 1;
}
if (ret)
- return ret;
+ break;
i += inc;
}
mutex_unlock(&d->i2c_mutex);
- return i;
+ return ret ? ret : i;
}
static u32 anysee_i2c_func(struct i2c_adapter *adapter)
@@ -272,9 +275,11 @@ static int anysee_frontend_attach(struct dvb_usb_adapter *adap)
model demod hw firmware
1. E30 MT352 02 0.2.1
2. E30 ZL10353 02 0.2.1
- 3. E30 Plus ZL10353 06 0.1.0
- 4. E30C Plus TDA10023 0a 0.1.0 rev 0.2
- 4. E30C Plus TDA10023 0f 0.1.2 rev 0.4
+ 3. E30 Combo ZL10353 0f 0.1.2 DVB-T/C combo
+ 4. E30 Plus ZL10353 06 0.1.0
+ 5. E30C Plus TDA10023 0a 0.1.0 rev 0.2
+ E30C Plus TDA10023 0f 0.1.2 rev 0.4
+ E30 Combo TDA10023 0f 0.1.2 DVB-T/C combo
*/
/* Zarlink MT352 DVB-T demod inside of Samsung DNOS404ZH102A NIM */
@@ -293,6 +298,21 @@ static int anysee_frontend_attach(struct dvb_usb_adapter *adap)
return 0;
}
+ /* for E30 Combo Plus DVB-T demodulator */
+ if (dvb_usb_anysee_delsys) {
+ ret = anysee_write_reg(adap->dev, 0xb0, 0x01);
+ if (ret)
+ return ret;
+
+ /* Zarlink ZL10353 DVB-T demod */
+ adap->fe = dvb_attach(zl10353_attach, &anysee_zl10353_config,
+ &adap->dev->i2c_adap);
+ if (adap->fe != NULL) {
+ state->tuner = DVB_PLL_SAMSUNG_DTOS403IH102A;
+ return 0;
+ }
+ }
+
/* connect demod on IO port D for TDA10023 & ZL10353 */
ret = anysee_write_reg(adap->dev, 0xb0, 0x25);
if (ret)
diff --git a/linux/drivers/media/dvb/dvb-usb/dvb-usb-ids.h b/linux/drivers/media/dvb/dvb-usb/dvb-usb-ids.h
index dfaf1d257..7380b94b3 100644
--- a/linux/drivers/media/dvb/dvb-usb/dvb-usb-ids.h
+++ b/linux/drivers/media/dvb/dvb-usb/dvb-usb-ids.h
@@ -232,5 +232,6 @@
#define USB_PID_DW2102 0x2102
#define USB_PID_XTENSIONS_XD_380 0x0381
#define USB_PID_TELESTAR_STARSTICK_2 0x8000
+#define USB_PID_MSI_DIGI_VOX_MINI_III 0x8807
#endif
diff --git a/linux/drivers/media/dvb/frontends/af9013.c b/linux/drivers/media/dvb/frontends/af9013.c
index 50e1e3f30..21c1060cf 100644
--- a/linux/drivers/media/dvb/frontends/af9013.c
+++ b/linux/drivers/media/dvb/frontends/af9013.c
@@ -1490,7 +1490,7 @@ static int af9013_download_firmware(struct af9013_state *state)
if (i == packets) /* set size of the last packet */
len = remainder;
- data = (fw->data + i * FW_PACKET_MAX_DATA);
+ data = (u8 *)(fw->data + i * FW_PACKET_MAX_DATA);
ret = af9013_write_ofsm_regs(state, addr, data, len);
addr += FW_PACKET_MAX_DATA;
@@ -1500,8 +1500,6 @@ static int af9013_download_firmware(struct af9013_state *state)
}
}
- #undef FW_PACKET_MAX_DATA
-
/* request boot firmware */
ret = af9013_write_reg(state, 0xe205, 1);
if (ret)
diff --git a/linux/drivers/media/dvb/frontends/au8522.c b/linux/drivers/media/dvb/frontends/au8522.c
index 78e270ee0..1e3ad2302 100644
--- a/linux/drivers/media/dvb/frontends/au8522.c
+++ b/linux/drivers/media/dvb/frontends/au8522.c
@@ -40,6 +40,8 @@ struct au8522_state {
u32 current_frequency;
fe_modulation_t current_modulation;
+ u32 fe_status;
+ unsigned int led_state;
};
static int debug;
@@ -538,11 +540,98 @@ static int au8522_init(struct dvb_frontend *fe)
return 0;
}
+static int au8522_led_gpio_enable(struct au8522_state *state, int onoff)
+{
+ struct au8522_led_config *led_config = state->config->led_cfg;
+ u8 val;
+
+ /* bail out if we cant control an LED */
+ if (!led_config || !led_config->gpio_output ||
+ !led_config->gpio_output_enable || !led_config->gpio_output_disable)
+ return 0;
+
+ val = au8522_readreg(state, 0x4000 |
+ (led_config->gpio_output & ~0xc000));
+ if (onoff) {
+ /* enable GPIO output */
+ val &= ~((led_config->gpio_output_enable >> 8) & 0xff);
+ val |= (led_config->gpio_output_enable & 0xff);
+ } else {
+ /* disable GPIO output */
+ val &= ~((led_config->gpio_output_disable >> 8) & 0xff);
+ val |= (led_config->gpio_output_disable & 0xff);
+ }
+ return au8522_writereg(state, 0x8000 |
+ (led_config->gpio_output & ~0xc000), val);
+}
+
+/* led = 0 | off
+ * led = 1 | signal ok
+ * led = 2 | signal strong
+ * led < 0 | only light led if leds are currently off
+ */
+static int au8522_led_ctrl(struct au8522_state *state, int led)
+{
+ struct au8522_led_config *led_config = state->config->led_cfg;
+ int i, ret = 0;
+
+ /* bail out if we cant control an LED */
+ if (!led_config || !led_config->gpio_leds ||
+ !led_config->num_led_states || !led_config->led_states)
+ return 0;
+
+ if (led < 0) {
+ /* if LED is already lit, then leave it as-is */
+ if (state->led_state)
+ return 0;
+ else
+ led *= -1;
+ }
+
+ /* toggle LED if changing state */
+ if (state->led_state != led) {
+ u8 val;
+
+ dprintk("%s: %d\n", __func__, led);
+
+ au8522_led_gpio_enable(state, 1);
+
+ val = au8522_readreg(state, 0x4000 |
+ (led_config->gpio_leds & ~0xc000));
+
+ /* start with all leds off */
+ for (i = 0; i < led_config->num_led_states; i++)
+ val &= ~led_config->led_states[i];
+
+ /* set selected LED state */
+ if (led < led_config->num_led_states)
+ val |= led_config->led_states[led];
+ else if (led_config->num_led_states)
+ val |=
+ led_config->led_states[led_config->num_led_states - 1];
+
+ ret = au8522_writereg(state, 0x8000 |
+ (led_config->gpio_leds & ~0xc000), val);
+ if (ret < 0)
+ return ret;
+
+ state->led_state = led;
+
+ if (led == 0)
+ au8522_led_gpio_enable(state, 0);
+ }
+
+ return 0;
+}
+
static int au8522_sleep(struct dvb_frontend *fe)
{
struct au8522_state *state = fe->demodulator_priv;
dprintk("%s()\n", __func__);
+ /* turn off led */
+ au8522_led_ctrl(state, 0);
+
state->current_frequency = 0;
return 0;
@@ -592,12 +681,53 @@ static int au8522_read_status(struct dvb_frontend *fe, fe_status_t *status)
*status |= FE_HAS_CARRIER | FE_HAS_SIGNAL;
break;
}
+ state->fe_status = *status;
+
+ if (*status & FE_HAS_LOCK)
+ /* turn on LED, if it isn't on already */
+ au8522_led_ctrl(state, -1);
+ else
+ /* turn off LED */
+ au8522_led_ctrl(state, 0);
dprintk("%s() status 0x%08x\n", __func__, *status);
return 0;
}
+static int au8522_led_status(struct au8522_state *state, const u16 *snr)
+{
+ struct au8522_led_config *led_config = state->config->led_cfg;
+ int led;
+ u16 strong;
+
+ /* bail out if we cant control an LED */
+ if (!led_config)
+ return 0;
+
+ if (0 == (state->fe_status & FE_HAS_LOCK))
+ return au8522_led_ctrl(state, 0);
+ else if (state->current_modulation == QAM_256)
+ strong = led_config->qam256_strong;
+ else if (state->current_modulation == QAM_64)
+ strong = led_config->qam64_strong;
+ else /* (state->current_modulation == VSB_8) */
+ strong = led_config->vsb8_strong;
+
+ if (*snr >= strong)
+ led = 2;
+ else
+ led = 1;
+
+ if ((state->led_state) &&
+ (((strong < *snr) ? (*snr - strong) : (strong - *snr)) <= 10))
+ /* snr didn't change enough to bother
+ * changing the color of the led */
+ return 0;
+
+ return au8522_led_ctrl(state, led);
+}
+
static int au8522_read_snr(struct dvb_frontend *fe, u16 *snr)
{
struct au8522_state *state = fe->demodulator_priv;
@@ -621,6 +751,9 @@ static int au8522_read_snr(struct dvb_frontend *fe, u16 *snr)
au8522_readreg(state, 0x4311),
snr);
+ if (state->config->led_cfg)
+ au8522_led_status(state, snr);
+
return ret;
}
diff --git a/linux/drivers/media/dvb/frontends/au8522.h b/linux/drivers/media/dvb/frontends/au8522.h
index 595915ade..7b94f554a 100644
--- a/linux/drivers/media/dvb/frontends/au8522.h
+++ b/linux/drivers/media/dvb/frontends/au8522.h
@@ -30,6 +30,21 @@ enum au8522_if_freq {
AU8522_IF_3_25MHZ,
};
+struct au8522_led_config {
+ u16 vsb8_strong;
+ u16 qam64_strong;
+ u16 qam256_strong;
+
+ u16 gpio_output;
+ /* unset hi bits, set low bits */
+ u16 gpio_output_enable;
+ u16 gpio_output_disable;
+
+ u16 gpio_leds;
+ u8 *led_states;
+ unsigned int num_led_states;
+};
+
struct au8522_config {
/* the demodulator's i2c address */
u8 demod_address;
@@ -39,6 +54,8 @@ struct au8522_config {
#define AU8522_DEMODLOCKING 1
u8 status_mode;
+ struct au8522_led_config *led_cfg;
+
enum au8522_if_freq vsb_if;
enum au8522_if_freq qam_if;
};
diff --git a/linux/drivers/media/radio/dsbr100.c b/linux/drivers/media/radio/dsbr100.c
index f3af92b59..7172977c7 100644
--- a/linux/drivers/media/radio/dsbr100.c
+++ b/linux/drivers/media/radio/dsbr100.c
@@ -361,11 +361,15 @@ static int vidioc_s_ctrl(struct file *file, void *priv,
switch (ctrl->id) {
case V4L2_CID_AUDIO_MUTE:
if (ctrl->value) {
- if (dsbr100_stop(radio)==-1)
+ if (dsbr100_stop(radio) == -1) {
warn("Radio did not respond properly");
+ return -EBUSY;
+ }
} else {
- if (dsbr100_start(radio)==-1)
+ if (dsbr100_start(radio) == -1) {
warn("Radio did not respond properly");
+ return -EBUSY;
+ }
}
return 0;
}
diff --git a/linux/drivers/media/radio/radio-mr800.c b/linux/drivers/media/radio/radio-mr800.c
index a33717c48..2ae8e1447 100644
--- a/linux/drivers/media/radio/radio-mr800.c
+++ b/linux/drivers/media/radio/radio-mr800.c
@@ -58,6 +58,7 @@
#include <media/v4l2-ioctl.h>
#include <linux/usb.h>
#include <linux/version.h> /* for KERNEL_VERSION MACRO */
+#include "compat.h"
/* driver and module definitions */
#define DRIVER_AUTHOR "Alexey Klimov <klimov.linux@gmail.com>"
@@ -159,7 +160,9 @@ static struct usb_driver usb_amradio_driver = {
.disconnect = usb_amradio_disconnect,
.suspend = usb_amradio_suspend,
.resume = usb_amradio_resume,
+#if LINUX_VERSION_CODE >= KERNEL_VERSION(2, 6, 23)
.reset_resume = usb_amradio_resume,
+#endif
.id_table = usb_amradio_device_table,
.supports_autosuspend = 1,
};
diff --git a/linux/drivers/media/radio/radio-zoltrix.c b/linux/drivers/media/radio/radio-zoltrix.c
index 615165b57..61b0366ab 100644
--- a/linux/drivers/media/radio/radio-zoltrix.c
+++ b/linux/drivers/media/radio/radio-zoltrix.c
@@ -124,8 +124,11 @@ static int zol_setfreq(struct zol_device *dev, unsigned long freq)
unsigned int stereo = dev->stereo;
int i;
- if (freq == 0)
- return 1;
+ if (freq == 0) {
+ printk(KERN_WARNING "zoltrix: received zero freq. Failed to set.\n");
+ return -EINVAL;
+ }
+
m = (freq / 160 - 8800) * 2;
f = (unsigned long long) m + 0x4d1c;
@@ -280,7 +283,10 @@ static int vidioc_s_frequency(struct file *file, void *priv,
struct zol_device *zol = video_drvdata(file);
zol->curfreq = f->frequency;
- zol_setfreq(zol, zol->curfreq);
+ if (zol_setfreq(zol, zol->curfreq) != 0) {
+ printk(KERN_WARNING "zoltrix: Set frequency failed.\n");
+ return -EINVAL;
+ }
return 0;
}
@@ -344,7 +350,10 @@ static int vidioc_s_ctrl(struct file *file, void *priv,
return 0;
}
zol->stereo = 1;
- zol_setfreq(zol, zol->curfreq);
+ if (zol_setfreq(zol, zol->curfreq) != 0) {
+ printk(KERN_WARNING "zoltrix: Set frequency failed.\n");
+ return -EINVAL;
+ }
#if 0 /*keep*/
/* FIXME: Implement stereo/mono switch on V4L2 */
if (v->mode & VIDEO_SOUND_STEREO) {
diff --git a/linux/drivers/media/video/au0828/au0828-dvb.c b/linux/drivers/media/video/au0828/au0828-dvb.c
index 82474a4a8..bc76e4079 100644
--- a/linux/drivers/media/video/au0828/au0828-dvb.c
+++ b/linux/drivers/media/video/au0828/au0828-dvb.c
@@ -37,11 +37,39 @@ DVB_DEFINE_MOD_OPT_ADAPTER_NR(adapter_nr);
#define _AU0828_BULKPIPE 0x83
#define _BULKPIPESIZE 0xe522
+static u8 hauppauge_hvr950q_led_states[] = {
+ 0x00, /* off */
+ 0x02, /* yellow */
+ 0x04, /* green */
+};
+
+static struct au8522_led_config hauppauge_hvr950q_led_cfg = {
+ .gpio_output = 0x00e0,
+ .gpio_output_enable = 0x6006,
+ .gpio_output_disable = 0x0660,
+
+ .gpio_leds = 0x00e2,
+ .led_states = hauppauge_hvr950q_led_states,
+ .num_led_states = sizeof(hauppauge_hvr950q_led_states),
+
+ .vsb8_strong = 20 /* dB */ * 10,
+ .qam64_strong = 25 /* dB */ * 10,
+ .qam256_strong = 32 /* dB */ * 10,
+};
+
static struct au8522_config hauppauge_hvr950q_config = {
.demod_address = 0x8e >> 1,
.status_mode = AU8522_DEMODLOCKING,
.qam_if = AU8522_IF_6MHZ,
.vsb_if = AU8522_IF_6MHZ,
+ .led_cfg = &hauppauge_hvr950q_led_cfg,
+};
+
+static struct au8522_config fusionhdtv7usb_config = {
+ .demod_address = 0x8e >> 1,
+ .status_mode = AU8522_DEMODLOCKING,
+ .qam_if = AU8522_IF_6MHZ,
+ .vsb_if = AU8522_IF_6MHZ,
};
static struct au8522_config hauppauge_woodbury_config = {
@@ -357,7 +385,6 @@ int au0828_dvb_register(struct au0828_dev *dev)
switch (dev->board) {
case AU0828_BOARD_HAUPPAUGE_HVR850:
case AU0828_BOARD_HAUPPAUGE_HVR950Q:
- case AU0828_BOARD_DVICO_FUSIONHDTV7:
dvb->frontend = dvb_attach(au8522_attach,
&hauppauge_hvr950q_config,
&dev->i2c_adap);
@@ -383,6 +410,16 @@ int au0828_dvb_register(struct au0828_dev *dev)
0x60, &dev->i2c_adap,
&hauppauge_woodbury_tunerconfig);
break;
+ case AU0828_BOARD_DVICO_FUSIONHDTV7:
+ dvb->frontend = dvb_attach(au8522_attach,
+ &fusionhdtv7usb_config,
+ &dev->i2c_adap);
+ if (dvb->frontend != NULL) {
+ dvb_attach(xc5000_attach, dvb->frontend,
+ &dev->i2c_adap,
+ &hauppauge_hvr950q_tunerconfig);
+ }
+ break;
default:
printk(KERN_WARNING "The frontend of your DVB/ATSC card "
"isn't supported yet\n");
diff --git a/linux/drivers/media/video/pxa_camera.c b/linux/drivers/media/video/pxa_camera.c
index 00aa421fe..08723ed84 100644
--- a/linux/drivers/media/video/pxa_camera.c
+++ b/linux/drivers/media/video/pxa_camera.c
@@ -1006,9 +1006,9 @@ static int pxa_camera_resume(struct soc_camera_device *icd)
struct pxa_camera_dev *pcdev = ici->priv;
int i = 0, ret = 0;
- DRCMR68 = pcdev->dma_chans[0] | DRCMR_MAPVLD;
- DRCMR69 = pcdev->dma_chans[1] | DRCMR_MAPVLD;
- DRCMR70 = pcdev->dma_chans[2] | DRCMR_MAPVLD;
+ DRCMR(68) = pcdev->dma_chans[0] | DRCMR_MAPVLD;
+ DRCMR(69) = pcdev->dma_chans[1] | DRCMR_MAPVLD;
+ DRCMR(70) = pcdev->dma_chans[2] | DRCMR_MAPVLD;
CICR0 = pcdev->save_cicr[i++] & ~CICR0_ENB;
CICR1 = pcdev->save_cicr[i++];
@@ -1152,9 +1152,9 @@ static int pxa_camera_probe(struct platform_device *pdev)
pcdev->dma_chans[2] = err;
dev_dbg(pcdev->dev, "got DMA channel (V) %d\n", pcdev->dma_chans[2]);
- DRCMR68 = pcdev->dma_chans[0] | DRCMR_MAPVLD;
- DRCMR69 = pcdev->dma_chans[1] | DRCMR_MAPVLD;
- DRCMR70 = pcdev->dma_chans[2] | DRCMR_MAPVLD;
+ DRCMR(68) = pcdev->dma_chans[0] | DRCMR_MAPVLD;
+ DRCMR(69) = pcdev->dma_chans[1] | DRCMR_MAPVLD;
+ DRCMR(70) = pcdev->dma_chans[2] | DRCMR_MAPVLD;
/* request irq */
err = request_irq(pcdev->irq, pxa_camera_irq, 0, PXA_CAM_DRV_NAME,
diff --git a/linux/drivers/media/video/saa7134/saa7134-alsa.c b/linux/drivers/media/video/saa7134/saa7134-alsa.c
index 6293eba34..5182d958c 100644
--- a/linux/drivers/media/video/saa7134/saa7134-alsa.c
+++ b/linux/drivers/media/video/saa7134/saa7134-alsa.c
@@ -493,10 +493,12 @@ static int snd_card_saa7134_hw_params(struct snd_pcm_substream * substream,
period_size = params_period_bytes(hw_params);
periods = params_periods(hw_params);
- snd_assert(period_size >= 0x100 && period_size <= 0x10000,
- return -EINVAL);
- snd_assert(periods >= 4, return -EINVAL);
- snd_assert(period_size * periods <= 1024 * 1024, return -EINVAL);
+ if (period_size < 0x100 || period_size > 0x10000)
+ return -EINVAL;
+ if (periods < 4)
+ return -EINVAL;
+ if (period_size * periods > 1024 * 1024)
+ return -EINVAL;
dev = saa7134->dev;
@@ -947,7 +949,8 @@ static int snd_card_saa7134_new_mixer(snd_card_saa7134_t * chip)
unsigned int idx;
int err;
- snd_assert(chip != NULL, return -EINVAL);
+ if (snd_BUG_ON(!chip))
+ return -EINVAL;
strcpy(card->mixername, "SAA7134 Mixer");
for (idx = 0; idx < ARRAY_SIZE(snd_saa7134_controls); idx++) {
diff --git a/linux/firmware/Makefile b/linux/firmware/Makefile
index 9fe86041f..bc3dc8100 100644
--- a/linux/firmware/Makefile
+++ b/linux/firmware/Makefile
@@ -22,6 +22,7 @@ fw-external-y := $(subst ",,$(CONFIG_EXTRA_FIRMWARE))
fw-shipped-$(CONFIG_ATARI_DSP56K) += dsp56k/bootstrap.bin
fw-shipped-$(CONFIG_ATM_AMBASSADOR) += atmsar11.fw
+fw-shipped-$(CONFIG_CASSINI) += sun/cassini.bin
fw-shipped-$(CONFIG_COMPUTONE) += intelliport2.bin
fw-shipped-$(CONFIG_DVB_TTUSB_BUDGET) += ttusb-budget/dspbootcode.bin
fw-shipped-$(CONFIG_SMCTR) += tr_smctr.bin
diff --git a/linux/sound/pci/bt87x.c b/linux/sound/pci/bt87x.c
index c33300f22..6c70b246d 100644
--- a/linux/sound/pci/bt87x.c
+++ b/linux/sound/pci/bt87x.c
@@ -242,7 +242,6 @@ static inline void snd_bt87x_writel(struct snd_bt87x *chip, u32 reg, u32 value)
static int snd_bt87x_create_risc(struct snd_bt87x *chip, struct snd_pcm_substream *substream,
unsigned int periods, unsigned int period_bytes)
{
- struct snd_sg_buf *sgbuf = snd_pcm_substream_sgbuf(substream);
unsigned int i, offset;
u32 *risc;
@@ -261,6 +260,7 @@ static int snd_bt87x_create_risc(struct snd_bt87x *chip, struct snd_pcm_substrea
rest = period_bytes;
do {
u32 cmd, len;
+ unsigned int addr;
len = PAGE_SIZE - (offset % PAGE_SIZE);
if (len > rest)
@@ -275,7 +275,8 @@ static int snd_bt87x_create_risc(struct snd_bt87x *chip, struct snd_pcm_substrea
if (len == rest)
cmd |= RISC_EOL | RISC_IRQ;
*risc++ = cpu_to_le32(cmd);
- *risc++ = cpu_to_le32((u32)snd_pcm_sgbuf_get_addr(sgbuf, offset));
+ addr = snd_pcm_sgbuf_get_addr(substream, offset);
+ *risc++ = cpu_to_le32(addr);
offset += len;
rest -= len;
} while (rest > 0);
diff --git a/v4l/compat.h b/v4l/compat.h
index 6e90c0e63..0e2ccd7a9 100644
--- a/v4l/compat.h
+++ b/v4l/compat.h
@@ -237,4 +237,17 @@ static inline int list_is_singular(const struct list_head *head)
#define current_uid() (current->uid)
#endif
+#ifndef WARN
+#define WARN(condition, format...) ({ \
+ int __ret_warn_on = !!(condition); \
+ if (unlikely(__ret_warn_on)) \
+ printk(KERN_WARNING format); \
+ unlikely(__ret_warn_on); \
+})
+#endif
+
+#if LINUX_VERSION_CODE < KERNEL_VERSION(2, 6, 28)
+#define snd_BUG_ON(cond) WARN((cond), "BUG? (%s)\n", __stringify(cond))
+#endif
+
#endif
generated by cgit v1.2.3 (git 2.25.1) at 2025-01-06 23:33:28 +0000