diff options
-rw-r--r-- | linux/drivers/media/video/bt8xx/bttv-driver.c | 12 | ||||
-rw-r--r-- | linux/drivers/media/video/em28xx/em28xx-cards.c | 4 | ||||
-rw-r--r-- | linux/drivers/media/video/em28xx/em28xx-video.c | 2 | ||||
-rw-r--r-- | linux/drivers/media/video/msp3400-kthreads.c | 4 | ||||
-rw-r--r-- | linux/drivers/media/video/pvrusb2/pvrusb2-audio.c | 10 | ||||
-rw-r--r-- | linux/include/media/msp3400.h | 60 |
6 files changed, 46 insertions, 46 deletions
diff --git a/linux/drivers/media/video/bt8xx/bttv-driver.c b/linux/drivers/media/video/bt8xx/bttv-driver.c index ea9f82586..9586f91e3 100644 --- a/linux/drivers/media/video/bt8xx/bttv-driver.c +++ b/linux/drivers/media/video/bt8xx/bttv-driver.c @@ -994,12 +994,12 @@ audio_mux(struct bttv *btv, int input, int mute) For now this is sufficient. */ switch (input) { case TVAUDIO_INPUT_RADIO: - route.input = MSP_INPUT(MSP_IN_SCART_2, MSP_IN_TUNER_1, - MSP_DSP_OUT_SCART, MSP_DSP_OUT_SCART); + route.input = MSP_INPUT(MSP_IN_SCART2, MSP_IN_TUNER1, + MSP_DSP_IN_SCART, MSP_DSP_IN_SCART); break; case TVAUDIO_INPUT_EXTERN: - route.input = MSP_INPUT(MSP_IN_SCART_1, MSP_IN_TUNER_1, - MSP_DSP_OUT_SCART, MSP_DSP_OUT_SCART); + route.input = MSP_INPUT(MSP_IN_SCART1, MSP_IN_TUNER1, + MSP_DSP_IN_SCART, MSP_DSP_IN_SCART); break; case TVAUDIO_INPUT_INTERN: /* Yes, this is the same input as for RADIO. I doubt @@ -1007,8 +1007,8 @@ audio_mux(struct bttv *btv, int input, int mute) input is the BTTV_BOARD_AVERMEDIA98. I wonder how that was tested. My guess is that the whole INTERN input does not work. */ - route.input = MSP_INPUT(MSP_IN_SCART_2, MSP_IN_TUNER_1, - MSP_DSP_OUT_SCART, MSP_DSP_OUT_SCART); + route.input = MSP_INPUT(MSP_IN_SCART2, MSP_IN_TUNER1, + MSP_DSP_IN_SCART, MSP_DSP_IN_SCART); break; case TVAUDIO_INPUT_TUNER: default: diff --git a/linux/drivers/media/video/em28xx/em28xx-cards.c b/linux/drivers/media/video/em28xx/em28xx-cards.c index 3622019e3..7892587d7 100644 --- a/linux/drivers/media/video/em28xx/em28xx-cards.c +++ b/linux/drivers/media/video/em28xx/em28xx-cards.c @@ -152,8 +152,8 @@ struct em28xx_board em28xx_boards[] = { },{ .type = EM28XX_VMUX_SVIDEO, .vmux = 2, - .amux = MSP_INPUT(MSP_IN_SCART_1, MSP_IN_TUNER_1, - MSP_DSP_OUT_SCART, MSP_DSP_OUT_SCART), + .amux = MSP_INPUT(MSP_IN_SCART1, MSP_IN_TUNER1, + MSP_DSP_IN_SCART, MSP_DSP_IN_SCART), }}, }, #ifdef CONFIG_XC3028 diff --git a/linux/drivers/media/video/em28xx/em28xx-video.c b/linux/drivers/media/video/em28xx/em28xx-video.c index 60feda020..840178958 100644 --- a/linux/drivers/media/video/em28xx/em28xx-video.c +++ b/linux/drivers/media/video/em28xx/em28xx-video.c @@ -247,7 +247,7 @@ static void video_mux(struct em28xx *dev, int index) if (dev->i2s_speed) em28xx_i2c_call_clients(dev, VIDIOC_INT_I2S_CLOCK_FREQ, &dev->i2s_speed); route.input = dev->ctl_ainput; - route.output = MSP_OUTPUT(MSP_OUT_SCART1_DA); + route.output = MSP_OUTPUT(MSP_SC_IN_DSP_SCART1); /* Note: this is msp3400 specific */ em28xx_i2c_call_clients(dev, VIDIOC_INT_S_AUDIO_ROUTING, &route); ainput = EM28XX_AUDIO_SRC_TUNER; diff --git a/linux/drivers/media/video/msp3400-kthreads.c b/linux/drivers/media/video/msp3400-kthreads.c index aaaa26219..d016a3310 100644 --- a/linux/drivers/media/video/msp3400-kthreads.c +++ b/linux/drivers/media/video/msp3400-kthreads.c @@ -888,11 +888,11 @@ static void msp34xxg_set_source(struct i2c_client *client, u16 reg, int in) break; } - if (in == MSP_DSP_OUT_TUNER) + if (in == MSP_DSP_IN_TUNER) source = (source << 8) | 0x20; /* the msp34x2g puts the MAIN_AVC, MAIN and AUX sources in 12, 13, 14 instead of 11, 12, 13. So we add one for that msp version. */ - else if (in >= MSP_DSP_OUT_MAIN_AVC && state->has_dolby_pro_logic) + else if (in >= MSP_DSP_IN_MAIN_AVC && state->has_dolby_pro_logic) source = ((in + 1) << 8) | matrix; else source = (in << 8) | matrix; diff --git a/linux/drivers/media/video/pvrusb2/pvrusb2-audio.c b/linux/drivers/media/video/pvrusb2/pvrusb2-audio.c index 79395d540..031412327 100644 --- a/linux/drivers/media/video/pvrusb2/pvrusb2-audio.c +++ b/linux/drivers/media/video/pvrusb2/pvrusb2-audio.c @@ -74,7 +74,7 @@ static void set_stereo(struct pvr2_msp3400_handler *ctxt) } route.input = MSP_INPUT_DEFAULT; - route.output = MSP_OUTPUT(MSP_OUT_SCART1_DA); + route.output = MSP_OUTPUT(MSP_SC_IN_DSP_SCART1); switch (hdw->controls[PVR2_CID_INPUT].value) { case PVR2_CVAL_INPUT_TV: break; @@ -83,14 +83,14 @@ static void set_stereo(struct pvr2_msp3400_handler *ctxt) we're still using the tuner. */ /* HV: actually it is more likely to be the SCART2 input if the ivtv experience is any indication. */ - route.input = MSP_INPUT(MSP_IN_SCART_2, MSP_IN_TUNER_1, - MSP_DSP_OUT_SCART, MSP_DSP_OUT_SCART); + route.input = MSP_INPUT(MSP_IN_SCART2, MSP_IN_TUNER1, + MSP_DSP_IN_SCART, MSP_DSP_IN_SCART); break; case PVR2_CVAL_INPUT_SVIDEO: case PVR2_CVAL_INPUT_COMPOSITE: /* SCART 1 input */ - route.input = MSP_INPUT(MSP_IN_SCART_1, MSP_IN_TUNER_1, - MSP_DSP_OUT_SCART, MSP_DSP_OUT_SCART); + route.input = MSP_INPUT(MSP_IN_SCART1, MSP_IN_TUNER1, + MSP_DSP_IN_SCART, MSP_DSP_IN_SCART); break; } pvr2_i2c_client_cmd(ctxt->client,VIDIOC_INT_S_AUDIO_ROUTING,&route); diff --git a/linux/include/media/msp3400.h b/linux/include/media/msp3400.h index 0be61a021..6ab854931 100644 --- a/linux/include/media/msp3400.h +++ b/linux/include/media/msp3400.h @@ -80,16 +80,16 @@ */ /* SCART input to DSP selection */ -#define MSP_IN_SCART_1 0 /* Pin SC1_IN */ -#define MSP_IN_SCART_2 1 /* Pin SC2_IN */ -#define MSP_IN_SCART_3 2 /* Pin SC3_IN */ -#define MSP_IN_SCART_4 3 /* Pin SC4_IN */ +#define MSP_IN_SCART1 0 /* Pin SC1_IN */ +#define MSP_IN_SCART2 1 /* Pin SC2_IN */ +#define MSP_IN_SCART3 2 /* Pin SC3_IN */ +#define MSP_IN_SCART4 3 /* Pin SC4_IN */ #define MSP_IN_MONO 6 /* Pin MONO_IN */ #define MSP_IN_MUTE 7 /* Mute DSP input */ #define MSP_SCART_TO_DSP(in) (in) /* Tuner input to demodulator and DSP selection */ -#define MSP_IN_TUNER_1 0 /* Analog Sound IF input pin ANA_IN1 */ -#define MSP_IN_TUNER_2 1 /* Analog Sound IF input pin ANA_IN2 */ +#define MSP_IN_TUNER1 0 /* Analog Sound IF input pin ANA_IN1 */ +#define MSP_IN_TUNER2 1 /* Analog Sound IF input pin ANA_IN2 */ #define MSP_TUNER_TO_DSP(in) ((in) << 3) /* The msp has up to 5 DSP outputs, each output can independently select @@ -109,14 +109,14 @@ DSP. This is currently not implemented. Also not implemented is the multi-channel capable I2S3 input of the 44x0G. If someone can demonstrate a need for one of those features then additional support can be added. */ -#define MSP_DSP_OUT_TUNER 0 /* Tuner output */ -#define MSP_DSP_OUT_SCART 2 /* SCART output */ -#define MSP_DSP_OUT_I2S1 5 /* I2S1 output */ -#define MSP_DSP_OUT_I2S2 6 /* I2S2 output */ -#define MSP_DSP_OUT_I2S3 7 /* I2S3 output */ -#define MSP_DSP_OUT_MAIN_AVC 11 /* MAIN AVC processed output */ -#define MSP_DSP_OUT_MAIN 12 /* MAIN output */ -#define MSP_DSP_OUT_AUX 13 /* AUX output */ +#define MSP_DSP_IN_TUNER 0 /* Tuner DSP input */ +#define MSP_DSP_IN_SCART 2 /* SCART DSP input */ +#define MSP_DSP_IN_I2S1 5 /* I2S1 DSP input */ +#define MSP_DSP_IN_I2S2 6 /* I2S2 DSP input */ +#define MSP_DSP_IN_I2S3 7 /* I2S3 DSP input */ +#define MSP_DSP_IN_MAIN_AVC 11 /* MAIN AVC processed DSP input */ +#define MSP_DSP_IN_MAIN 12 /* MAIN DSP input */ +#define MSP_DSP_IN_AUX 13 /* AUX DSP input */ #define MSP_DSP_TO_MAIN(in) ((in) << 4) #define MSP_DSP_TO_AUX(in) ((in) << 8) #define MSP_DSP_TO_SCART1(in) ((in) << 12) @@ -125,16 +125,16 @@ /* Output SCART select: the SCART outputs can select which input to use. */ -#define MSP_OUT_SCART1 0 /* SCART1 input, bypassing the DSP */ -#define MSP_OUT_SCART2 1 /* SCART2 input, bypassing the DSP */ -#define MSP_OUT_SCART3 2 /* SCART3 input, bypassing the DSP */ -#define MSP_OUT_SCART4 3 /* SCART4 input, bypassing the DSP */ -#define MSP_OUT_SCART1_DA 4 /* DSP SCART1 output */ -#define MSP_OUT_SCART2_DA 5 /* DSP SCART2 output */ -#define MSP_OUT_MONO 6 /* MONO input, bypassing the DSP */ -#define MSP_OUT_MUTE 7 /* MUTE output */ -#define MSP_OUT_TO_SCART1(in) (in) -#define MSP_OUT_TO_SCART2(in) ((in) << 4) +#define MSP_SC_IN_SCART1 0 /* SCART1 input, bypassing the DSP */ +#define MSP_SC_IN_SCART2 1 /* SCART2 input, bypassing the DSP */ +#define MSP_SC_IN_SCART3 2 /* SCART3 input, bypassing the DSP */ +#define MSP_SC_IN_SCART4 3 /* SCART4 input, bypassing the DSP */ +#define MSP_SC_IN_DSP_SCART1 4 /* DSP SCART1 input */ +#define MSP_SC_IN_DSP_SCART2 5 /* DSP SCART2 input */ +#define MSP_SC_IN_MONO 6 /* MONO input, bypassing the DSP */ +#define MSP_SC_IN_MUTE 7 /* MUTE output */ +#define MSP_SC_TO_SCART1(in) (in) +#define MSP_SC_TO_SCART2(in) ((in) << 4) /* Shortcut macros */ #define MSP_INPUT(sc, t, main_aux_src, sc_i2s_src) \ @@ -145,14 +145,14 @@ MSP_DSP_TO_SCART1(sc_i2s_src) | \ MSP_DSP_TO_SCART2(sc_i2s_src) | \ MSP_DSP_TO_I2S(sc_i2s_src)) -#define MSP_INPUT_DEFAULT MSP_INPUT(MSP_IN_SCART_1, MSP_IN_TUNER_1, \ - MSP_DSP_OUT_TUNER, MSP_DSP_OUT_TUNER) +#define MSP_INPUT_DEFAULT MSP_INPUT(MSP_IN_SCART1, MSP_IN_TUNER1, \ + MSP_DSP_IN_TUNER, MSP_DSP_IN_TUNER) #define MSP_OUTPUT(sc) \ - (MSP_OUT_TO_SCART1(sc) | \ - MSP_OUT_TO_SCART2(sc)) + (MSP_SC_TO_SCART1(sc) | \ + MSP_SC_TO_SCART2(sc)) /* This equals the RESET position of the msp3400 ACB register */ -#define MSP_OUTPUT_DEFAULT (MSP_OUT_TO_SCART1(MSP_OUT_SCART3) | \ - MSP_OUT_TO_SCART2(MSP_OUT_SCART1_DA)) +#define MSP_OUTPUT_DEFAULT (MSP_SC_TO_SCART1(MSP_SC_IN_SCART3) | \ + MSP_SC_TO_SCART2(MSP_SC_IN_DSP_SCART1)) /* Tuner inputs vs. msp version */ /* Chip TUNER_1 TUNER_2 |