diff options
| -rw-r--r-- | linux/drivers/media/dvb/ttusb-budget/dvb-ttusb-budget.c | 131 |
1 files changed, 129 insertions, 2 deletions
diff --git a/linux/drivers/media/dvb/ttusb-budget/dvb-ttusb-budget.c b/linux/drivers/media/dvb/ttusb-budget/dvb-ttusb-budget.c index 9fac18df1..49e26df5e 100644 --- a/linux/drivers/media/dvb/ttusb-budget/dvb-ttusb-budget.c +++ b/linux/drivers/media/dvb/ttusb-budget/dvb-ttusb-budget.c @@ -26,6 +26,7 @@ #include "dvb_net.h" #include "cx22700.h" #include "tda1004x.h" +#include "stv0299.h" #include <linux/dvb/frontend.h> #include <linux/dvb/dmx.h> @@ -1178,7 +1179,8 @@ static int philips_tdm1316l_pll_set(struct dvb_frontend* fe, struct dvb_frontend tuner_buf[2] = 0xca; tuner_buf[3] = (cp << 5) | (filter << 3) | band; - if (i2c_transfer(&ttusb->i2c_adap, &tuner_msg, 1) != 1) return -EIO; + if (i2c_transfer(&ttusb->i2c_adap, &tuner_msg, 1) != 1) + return -EIO; msleep(1); return 0; @@ -1202,10 +1204,135 @@ struct tda1004x_config philips_tdm1316l_config = { }; +static u8 alps_bsru6_inittab[] = { + 0x01, 0x15, + 0x02, 0x00, + 0x03, 0x00, + 0x04, 0x7d, /* F22FR = 0x7d, F22 = f_VCO / 128 / 0x7d = 22 kHz */ + 0x05, 0x35, /* I2CT = 0, SCLT = 1, SDAT = 1 */ + 0x06, 0x40, /* DAC not used, set to high impendance mode */ + 0x07, 0x00, /* DAC LSB */ + 0x08, 0x40, /* DiSEqC off, LNB power on OP2/LOCK pin on */ + 0x09, 0x00, /* FIFO */ + 0x0c, 0x51, /* OP1 ctl = Normal, OP1 val = 1 (LNB Power ON) */ + 0x0d, 0x82, /* DC offset compensation = ON, beta_agc1 = 2 */ + 0x0e, 0x23, /* alpha_tmg = 2, beta_tmg = 3 */ + 0x10, 0x3f, // AGC2 0x3d + 0x11, 0x84, + 0x12, 0xb5, // Lock detect: -64 Carrier freq detect:on + 0x15, 0xc9, // lock detector threshold + 0x16, 0x00, + 0x17, 0x00, + 0x18, 0x00, + 0x19, 0x00, + 0x1a, 0x00, + 0x1f, 0x50, + 0x20, 0x00, + 0x21, 0x00, + 0x22, 0x00, + 0x23, 0x00, + 0x28, 0x00, // out imp: normal out type: parallel FEC mode:0 + 0x29, 0x1e, // 1/2 threshold + 0x2a, 0x14, // 2/3 threshold + 0x2b, 0x0f, // 3/4 threshold + 0x2c, 0x09, // 5/6 threshold + 0x2d, 0x05, // 7/8 threshold + 0x2e, 0x01, + 0x31, 0x1f, // test all FECs + 0x32, 0x19, // viterbi and synchro search + 0x33, 0xfc, // rs control + 0x34, 0x93, // error control + 0x0f, 0x52, + 0xff, 0xff +}; + +static int alps_bsru6_set_symbol_rate(struct dvb_frontend *fe, u32 srate, u32 ratio) +{ + u8 aclk = 0; + u8 bclk = 0; + + if (srate < 1500000) { + aclk = 0xb7; + bclk = 0x47; + } else if (srate < 3000000) { + aclk = 0xb7; + bclk = 0x4b; + } else if (srate < 7000000) { + aclk = 0xb7; + bclk = 0x4f; + } else if (srate < 14000000) { + aclk = 0xb7; + bclk = 0x53; + } else if (srate < 30000000) { + aclk = 0xb6; + bclk = 0x53; + } else if (srate < 45000000) { + aclk = 0xb4; + bclk = 0x51; + } + + stv0299_writereg(fe, 0x13, aclk); + stv0299_writereg(fe, 0x14, bclk); + stv0299_writereg(fe, 0x1f, (ratio >> 16) & 0xff); + stv0299_writereg(fe, 0x20, (ratio >> 8) & 0xff); + stv0299_writereg(fe, 0x21, (ratio) & 0xf0); + + return 0; +} + +static int alps_bsru6_pll_set(struct dvb_frontend *fe, struct dvb_frontend_parameters *params) +{ + struct ttusb* ttusb = (struct ttusb*) fe->dvb->priv; + u8 buf[4]; + u32 div; + struct i2c_msg msg = {.addr = 0x61,.flags = 0,.buf = buf,.len = sizeof(buf) }; + + if ((params->frequency < 950000) || (params->frequency > 2150000)) + return -EINVAL; + + div = (params->frequency + (125 - 1)) / 125; // round correctly + buf[0] = (div >> 8) & 0x7f; + buf[1] = div & 0xff; + buf[2] = 0x80 | ((div & 0x18000) >> 10) | 4; + buf[3] = 0xC4; + + if (params->frequency > 1530000) + buf[3] = 0xc0; + + if (i2c_transfer(&ttusb->i2c_adap, &msg, 1) != 1) + return -EIO; + + return 0; +} + +static struct stv0299_config alps_bsru6_config = { + + .demod_address = 0x68, + .inittab = alps_bsru6_inittab, + .mclk = 88000000UL, + .invert = 1, + .enhanced_tuning = 0, + .skip_reinit = 0, + .lock_output = STV0229_LOCKOUTPUT_1, + .volt13_op0_op1 = STV0299_VOLT13_OP1, + .min_delay_ms = 100, + .set_symbol_rate = alps_bsru6_set_symbol_rate, + .pll_set = alps_bsru6_pll_set, +}; + + + static void frontend_init(struct ttusb* ttusb) { switch(ttusb->dev->descriptor.idProduct) { + case 0x1003: // Hauppauge/TT Nova-USB-S budget (stv0299/ALPS BSRU6(tsa5059) + // try the ALPS BSRU6 first + ttusb->fe = stv0299_attach(&alps_bsru6_config, &ttusb->i2c_adap); + if (ttusb->fe != NULL) break; + + break; + case 0x1005: // Hauppauge/TT Nova-USB-t budget (tda10046/Philips td1316(tda6651tt) OR cx22700/ALPS TDMB7(??)) // try the ALPS TDMB7 first ttusb->fe = cx22700_attach(&alps_tdmb7_config, &ttusb->i2c_adap); @@ -1384,7 +1511,7 @@ static void ttusb_disconnect(struct usb_interface *intf) } static struct usb_device_id ttusb_table[] = { -/* {USB_DEVICE(0xb48, 0x1003)},UNDEFINED HARDWARE - mail linuxtv.org list */ + {USB_DEVICE(0xb48, 0x1003)}, /* {USB_DEVICE(0xb48, 0x1004)},UNDEFINED HARDWARE - mail linuxtv.org list*/ /* to be confirmed ???? */ {USB_DEVICE(0xb48, 0x1005)}, {} |