diff options
Diffstat (limited to 'dvb-spec/sgml/video.sgml')
| -rw-r--r-- | dvb-spec/sgml/video.sgml | 1971 |
1 files changed, 0 insertions, 1971 deletions
diff --git a/dvb-spec/sgml/video.sgml b/dvb-spec/sgml/video.sgml deleted file mode 100644 index 7bb287e67..000000000 --- a/dvb-spec/sgml/video.sgml +++ /dev/null @@ -1,1971 +0,0 @@ -<title>DVB Video Device</title> -<para>The DVB video device controls the MPEG2 video decoder of the DVB hardware. It -can be accessed through <emphasis role="tt">/dev/dvb/adapter0/video0</emphasis>. Data types and and -ioctl definitions can be accessed by including <emphasis role="tt">linux/dvb/video.h</emphasis> in your -application. -</para> -<para>Note that the DVB video device only controls decoding of the MPEG video stream, not -its presentation on the TV or computer screen. On PCs this is typically handled by an -associated video4linux device, e.g. <emphasis role="tt">/dev/video</emphasis>, which allows scaling and defining output -windows. -</para> -<para>Some DVB cards don’t have their own MPEG decoder, which results in the omission of -the audio and video device as well as the video4linux device. -</para> -<para>The ioctls that deal with SPUs (sub picture units) and navigation packets are only -supported on some MPEG decoders made for DVD playback. -</para> -<section id="video_types"> -<title>Video Data Types</title> - -<section id="video_format_t"> -<title>video_format_t</title> -<para>The <emphasis role="tt">video_format_t</emphasis> data type defined by -</para> -<programlisting> - typedef enum { - VIDEO_FORMAT_4_3, - VIDEO_FORMAT_16_9 - } video_format_t; -</programlisting> -<para>is used in the VIDEO_SET_FORMAT function (??) to tell the driver which aspect ratio -the output hardware (e.g. TV) has. It is also used in the data structures video_status -(??) returned by VIDEO_GET_STATUS (??) and video_event (??) returned by -VIDEO_GET_EVENT (??) which report about the display format of the current video -stream. -</para> -</section> - -<section id="video_display_format_t"> -<title>video_display_format_t</title> -<para>In case the display format of the video stream and of the display hardware differ the -application has to specify how to handle the cropping of the picture. This can be done using -the VIDEO_SET_DISPLAY_FORMAT call (??) which accepts -</para> -<programlisting> - typedef enum { - VIDEO_PAN_SCAN, - VIDEO_LETTER_BOX, - VIDEO_CENTER_CUT_OUT - } video_display_format_t; -</programlisting> -<para>as argument. -</para> -</section> - -<section id="video_stream_source"> -<title>video stream source</title> -<para>The video stream source is set through the VIDEO_SELECT_SOURCE call and can take -the following values, depending on whether we are replaying from an internal (demuxer) or -external (user write) source. -</para> -<programlisting> - typedef enum { - VIDEO_SOURCE_DEMUX, - VIDEO_SOURCE_MEMORY - } video_stream_source_t; -</programlisting> -<para>VIDEO_SOURCE_DEMUX selects the demultiplexer (fed either by the frontend or the -DVR device) as the source of the video stream. If VIDEO_SOURCE_MEMORY -is selected the stream comes from the application through the <emphasis role="tt">write()</emphasis> system -call. -</para> -</section> - -<section id="video_play_state"> -<title>video play state</title> -<para>The following values can be returned by the VIDEO_GET_STATUS call representing the -state of video playback. -</para> -<programlisting> - typedef enum { - VIDEO_STOPPED, - VIDEO_PLAYING, - VIDEO_FREEZED - } video_play_state_t; -</programlisting> -</section> - -<section id="video_event"> -<title>struct video_event</title> -<para>The following is the structure of a video event as it is returned by the VIDEO_GET_EVENT -call. -</para> -<programlisting> - struct video_event { - int32_t type; - time_t timestamp; - union { - video_format_t video_format; - } u; - }; -</programlisting> -</section> - -<section id="video_status"> -<title>struct video_status</title> -<para>The VIDEO_GET_STATUS call returns the following structure informing about various -states of the playback operation. -</para> -<programlisting> - struct video_status { - boolean video_blank; - video_play_state_t play_state; - video_stream_source_t stream_source; - video_format_t video_format; - video_displayformat_t display_format; - }; -</programlisting> -<para>If video_blank is set video will be blanked out if the channel is changed or if playback is -stopped. Otherwise, the last picture will be displayed. play_state indicates if the video is -currently frozen, stopped, or being played back. The stream_source corresponds to the seleted -source for the video stream. It can come either from the demultiplexer or from memory. -The video_format indicates the aspect ratio (one of 4:3 or 16:9) of the currently -played video stream. Finally, display_format corresponds to the selected cropping -mode in case the source video format is not the same as the format of the output -device. -</para> -</section> - -<section id="video_still_picture"> -<title>struct video_still_picture</title> -<para>An I-frame displayed via the VIDEO_STILLPICTURE call is passed on within the -following structure. -</para> -<programlisting> - /⋆ pointer to and size of a single iframe in memory ⋆/ - struct video_still_picture { - char ⋆iFrame; - int32_t size; - }; -</programlisting> -</section> - -<section id="video_caps"> -<title>video capabilities</title> -<para>A call to VIDEO_GET_CAPABILITIES returns an unsigned integer with the following -bits set according to the hardwares capabilities. -</para> -<programlisting> - /⋆ bit definitions for capabilities: ⋆/ - /⋆ can the hardware decode MPEG1 and/or MPEG2? ⋆/ - #define VIDEO_CAP_MPEG1 1 - #define VIDEO_CAP_MPEG2 2 - /⋆ can you send a system and/or program stream to video device? - (you still have to open the video and the audio device but only - send the stream to the video device) ⋆/ - #define VIDEO_CAP_SYS 4 - #define VIDEO_CAP_PROG 8 - /⋆ can the driver also handle SPU, NAVI and CSS encoded data? - (CSS API is not present yet) ⋆/ - #define VIDEO_CAP_SPU 16 - #define VIDEO_CAP_NAVI 32 - #define VIDEO_CAP_CSS 64 -</programlisting> -</section> - -<section id="video_system"> -<title>video system</title> -<para>A call to VIDEO_SET_SYSTEM sets the desired video system for TV output. The -following system types can be set: -</para> -<programlisting> - typedef enum { - VIDEO_SYSTEM_PAL, - VIDEO_SYSTEM_NTSC, - VIDEO_SYSTEM_PALN, - VIDEO_SYSTEM_PALNc, - VIDEO_SYSTEM_PALM, - VIDEO_SYSTEM_NTSC60, - VIDEO_SYSTEM_PAL60, - VIDEO_SYSTEM_PALM60 - } video_system_t; -</programlisting> -</section> - -<section id="video_highlight"> -<title>struct video_highlight</title> -<para>Calling the ioctl VIDEO_SET_HIGHLIGHTS posts the SPU highlight information. The -call expects the following format for that information: -</para> -<programlisting> - typedef - struct video_highlight { - boolean active; /⋆ 1=show highlight, 0=hide highlight ⋆/ - uint8_t contrast1; /⋆ 7- 4 Pattern pixel contrast ⋆/ - /⋆ 3- 0 Background pixel contrast ⋆/ - uint8_t contrast2; /⋆ 7- 4 Emphasis pixel-2 contrast ⋆/ - /⋆ 3- 0 Emphasis pixel-1 contrast ⋆/ - uint8_t color1; /⋆ 7- 4 Pattern pixel color ⋆/ - /⋆ 3- 0 Background pixel color ⋆/ - uint8_t color2; /⋆ 7- 4 Emphasis pixel-2 color ⋆/ - /⋆ 3- 0 Emphasis pixel-1 color ⋆/ - uint32_t ypos; /⋆ 23-22 auto action mode ⋆/ - /⋆ 21-12 start y ⋆/ - /⋆ 9- 0 end y ⋆/ - uint32_t xpos; /⋆ 23-22 button color number ⋆/ - /⋆ 21-12 start x ⋆/ - /⋆ 9- 0 end x ⋆/ - } video_highlight_t; -</programlisting> - -</section> -<section id="video_spu"> -<title>video SPU</title> -<para>Calling VIDEO_SET_SPU deactivates or activates SPU decoding, according to the -following format: -</para> -<programlisting> - typedef - struct video_spu { - boolean active; - int stream_id; - } video_spu_t; -</programlisting> - -</section> -<section id="video_spu_palette"> -<title>video SPU palette</title> -<para>The following structure is used to set the SPU palette by calling VIDEO_SPU_PALETTE: -</para> -<programlisting> - typedef - struct video_spu_palette{ - int length; - uint8_t ⋆palette; - } video_spu_palette_t; -</programlisting> - -</section> -<section id="video_navi_pack"> -<title>video NAVI pack</title> -<para>In order to get the navigational data the following structure has to be passed to the ioctl -VIDEO_GET_NAVI: -</para> -<programlisting> - typedef - struct video_navi_pack{ - int length; /⋆ 0 ... 1024 ⋆/ - uint8_t data[1024]; - } video_navi_pack_t; -</programlisting> -</section> - - -<section id="video_attributes"> -<title>video attributes</title> -<para>The following attributes can be set by a call to VIDEO_SET_ATTRIBUTES: -</para> -<programlisting> - typedef uint16_t video_attributes_t; - /⋆ bits: descr. ⋆/ - /⋆ 15-14 Video compression mode (0=MPEG-1, 1=MPEG-2) ⋆/ - /⋆ 13-12 TV system (0=525/60, 1=625/50) ⋆/ - /⋆ 11-10 Aspect ratio (0=4:3, 3=16:9) ⋆/ - /⋆ 9- 8 permitted display mode on 4:3 monitor (0=both, 1=only pan-sca ⋆/ - /⋆ 7 line 21-1 data present in GOP (1=yes, 0=no) ⋆/ - /⋆ 6 line 21-2 data present in GOP (1=yes, 0=no) ⋆/ - /⋆ 5- 3 source resolution (0=720x480/576, 1=704x480/576, 2=352x480/57 ⋆/ - /⋆ 2 source letterboxed (1=yes, 0=no) ⋆/ - /⋆ 0 film/camera mode (0=camera, 1=film (625/50 only)) ⋆/ -</programlisting> -</section></section> - - -<section id="video_function_calls"> -<title>Video Function Calls</title> - - -<section id="video_fopen"> -<title>open()</title> -<para>DESCRIPTION -</para> -<informaltable><tgroup cols="1"><tbody><row><entry - align="char"> -<para>This system call opens a named video device (e.g. /dev/dvb/adapter0/video0) - for subsequent use.</para> -<para>When an open() call has succeeded, the device will be ready for use. - The significance of blocking or non-blocking mode is described in the - documentation for functions where there is a difference. It does not affect the - semantics of the open() call itself. A device opened in blocking mode can later - be put into non-blocking mode (and vice versa) using the F_SETFL command - of the fcntl system call. This is a standard system call, documented in the Linux - manual page for fcntl. Only one user can open the Video Device in O_RDWR - mode. All other attempts to open the device in this mode will fail, and an - error-code will be returned. If the Video Device is opened in O_RDONLY - mode, the only ioctl call that can be used is VIDEO_GET_STATUS. All other - call will return an error code.</para> -</entry> - </row></tbody></tgroup></informaltable> - -<para>SYNOPSIS -</para> -<informaltable><tgroup cols="1"><tbody><row><entry - align="char"> -<para>int open(const char ⋆deviceName, int flags);</para> -</entry> - </row></tbody></tgroup></informaltable> -<para>PARAMETERS -</para> -<informaltable><tgroup cols="2"><tbody><row><entry - align="char"> -<para>const char - *deviceName</para> -</entry><entry - align="char"> -<para>Name of specific video device.</para> -</entry> - </row><row><entry - align="char"> -<para>int flags</para> -</entry><entry - align="char"> -<para>A bit-wise OR of the following flags:</para> -</entry> - </row><row><entry - align="char"> -</entry><entry - align="char"> -<para>O_RDONLY read-only access</para> -</entry> - </row><row><entry - align="char"> -</entry><entry - align="char"> -<para>O_RDWR read/write access</para> -</entry> - </row><row><entry - align="char"> -</entry><entry - align="char"> -<para>O_NONBLOCK open in non-blocking mode</para> -</entry> - </row><row><entry - align="char"> -</entry><entry - align="char"> -<para>(blocking mode is the default)</para> -</entry> - </row></tbody></tgroup></informaltable> -<para>ERRORS -</para> -<informaltable><tgroup cols="2"><tbody><row><entry - align="char"> -<para>ENODEV</para> -</entry><entry - align="char"> -<para>Device driver not loaded/available.</para> -</entry> - </row><row><entry - align="char"> -<para>EINTERNAL</para> -</entry><entry - align="char"> -<para>Internal error.</para> -</entry> - </row><row><entry - align="char"> -<para>EBUSY</para> -</entry><entry - align="char"> -<para>Device or resource busy.</para> -</entry> - </row><row><entry - align="char"> -<para>EINVAL</para> -</entry><entry - align="char"> -<para>Invalid argument.</para> -</entry> - </row></tbody></tgroup></informaltable> - -</section> -<section id="video_fclose"> -<title>close()</title> -<para>DESCRIPTION -</para> -<informaltable><tgroup cols="1"><tbody><row><entry - align="char"> -<para>This system call closes a previously opened video device.</para> -</entry> - </row></tbody></tgroup></informaltable> -<para>SYNOPSIS -</para> -<informaltable><tgroup cols="1"><tbody><row><entry - align="char"> -<para>int close(int fd);</para> -</entry> - </row></tbody></tgroup></informaltable> -<para>PARAMETERS -</para> -<informaltable><tgroup cols="2"><tbody><row><entry - align="char"> -<para>int fd</para> -</entry><entry - align="char"> -<para>File descriptor returned by a previous call to open().</para> -</entry> - </row></tbody></tgroup></informaltable> -<para>ERRORS -</para> -<informaltable><tgroup cols="2"><tbody><row><entry - align="char"> -<para>EBADF</para> -</entry><entry - align="char"> -<para>fd is not a valid open file descriptor.</para> -</entry> - </row></tbody></tgroup></informaltable> - -</section> -<section id="video_fwrite"> -<title>write()</title> -<para>DESCRIPTION -</para> -<informaltable><tgroup cols="1"><tbody><row><entry - align="char"> -<para>This system call can only be used if VIDEO_SOURCE_MEMORY is selected - in the ioctl call VIDEO_SELECT_SOURCE. The data provided shall be in - PES format, unless the capability allows other formats. If O_NONBLOCK is - not specified the function will block until buffer space is available. The amount - of data to be transferred is implied by count.</para> -</entry> - </row></tbody></tgroup></informaltable> -<para>SYNOPSIS -</para> -<informaltable><tgroup cols="1"><tbody><row><entry - align="char"> -<para>size_t write(int fd, const void ⋆buf, size_t count);</para> -</entry> - </row></tbody></tgroup></informaltable> -<para>PARAMETERS -</para> -<informaltable><tgroup cols="2"><tbody><row><entry - align="char"> -<para>int fd</para> -</entry><entry - align="char"> -<para>File descriptor returned by a previous call to open().</para> -</entry> - </row><row><entry - align="char"> -<para>void *buf</para> -</entry><entry - align="char"> -<para>Pointer to the buffer containing the PES data.</para> -</entry> - </row><row><entry - align="char"> -<para>size_t count</para> -</entry><entry - align="char"> -<para>Size of buf.</para> -</entry> - </row></tbody></tgroup></informaltable> -<para>ERRORS -</para> -<informaltable><tgroup cols="2"><tbody><row><entry - align="char"> -<para>EPERM</para> -</entry><entry - align="char"> -<para>Mode VIDEO_SOURCE_MEMORY not selected.</para> -</entry> - </row><row><entry - align="char"> -<para>ENOMEM</para> -</entry><entry - align="char"> -<para>Attempted to write more data than the internal buffer can - hold.</para> -</entry> - </row><row><entry - align="char"> -<para>EBADF</para> -</entry><entry - align="char"> -<para>fd is not a valid open file descriptor.</para> -</entry> - </row></tbody></tgroup></informaltable> - -</section><section -role="subsection"><title>VIDEO_STOP</title> -<para>DESCRIPTION -</para> -<informaltable><tgroup cols="1"><tbody><row><entry - align="char"> -<para>This ioctl call asks the Video Device to stop playing the current stream. - Depending on the input parameter, the screen can be blanked out or displaying - the last decoded frame.</para> -</entry> - </row></tbody></tgroup></informaltable> -<para>SYNOPSIS -</para> -<informaltable><tgroup cols="1"><tbody><row><entry - align="char"> -<para>int ioctl(fd, int request = VIDEO_STOP, boolean - mode);</para> -</entry> - </row></tbody></tgroup></informaltable> -<para>PARAMETERS -</para> -<informaltable><tgroup cols="2"><tbody><row><entry - align="char"> -<para>int fd</para> -</entry><entry - align="char"> -<para>File descriptor returned by a previous call to open().</para> -</entry> - </row><row><entry - align="char"> -<para>int request</para> -</entry><entry - align="char"> -<para>Equals VIDEO_STOP for this command.</para> -</entry> - </row><row><entry - align="char"> -<para>Boolean mode</para> -</entry><entry - align="char"> -<para>Indicates how the screen shall be handled.</para> -</entry> - </row><row><entry - align="char"> -</entry><entry - align="char"> -<para>TRUE: Blank screen when stop.</para> -</entry> - </row><row><entry - align="char"> -</entry><entry - align="char"> -<para>FALSE: Show last decoded frame.</para> -</entry> - </row></tbody></tgroup></informaltable> -<para>ERRORS -</para> -<informaltable><tgroup cols="2"><tbody><row><entry - align="char"> -<para>EBADF</para> -</entry><entry - align="char"> -<para>fd is not a valid open file descriptor</para> -</entry> - </row><row><entry - align="char"> -<para>EINTERNAL</para> -</entry><entry - align="char"> -<para>Internal error, possibly in the communication with the - DVB subsystem.</para> -</entry> - </row></tbody></tgroup></informaltable> - -</section><section -role="subsection"><title>VIDEO_PLAY</title> -<para>DESCRIPTION -</para> -<informaltable><tgroup cols="1"><tbody><row><entry - align="char"> -<para>This ioctl call asks the Video Device to start playing a video stream from the - selected source.</para> -</entry> - </row></tbody></tgroup></informaltable> -<para>SYNOPSIS -</para> -<informaltable><tgroup cols="1"><tbody><row><entry - align="char"> -<para>int ioctl(fd, int request = VIDEO_PLAY);</para> -</entry> - </row></tbody></tgroup></informaltable> -<para>PARAMETERS -</para> -<informaltable><tgroup cols="2"><tbody><row><entry - align="char"> -<para>int fd</para> -</entry><entry - align="char"> -<para>File descriptor returned by a previous call to open().</para> -</entry> - </row><row><entry - align="char"> -<para>int request</para> -</entry><entry - align="char"> -<para>Equals VIDEO_PLAY for this command.</para> -</entry> - </row></tbody></tgroup></informaltable> -<para>ERRORS -</para> -<informaltable><tgroup cols="2"><tbody><row><entry - align="char"> -<para>EBADF</para> -</entry><entry - align="char"> -<para>fd is not a valid open file descriptor</para> -</entry> - </row><row><entry - align="char"> -<para>EINTERNAL</para> -</entry><entry - align="char"> -<para>Internal error, possibly in the communication with the - DVB subsystem.</para> -</entry> - </row></tbody></tgroup></informaltable> - -</section><section -role="subsection"><title>VIDEO_FREEZE</title> -<para>DESCRIPTION -</para> -<informaltable><tgroup cols="1"><tbody><row><entry - align="char"> -<para>This ioctl call suspends the live video stream being played. Decoding - and playing are frozen. It is then possible to restart the decoding - and playing process of the video stream using the VIDEO_CONTINUE - command. If VIDEO_SOURCE_MEMORY is selected in the ioctl call - VIDEO_SELECT_SOURCE, the DVB subsystem will not decode any more - data until the ioctl call VIDEO_CONTINUE or VIDEO_PLAY is performed.</para> -</entry> - </row></tbody></tgroup></informaltable> -<para>SYNOPSIS -</para> -<informaltable><tgroup cols="1"><tbody><row><entry - align="char"> -<para>int ioctl(fd, int request = VIDEO_FREEZE);</para> -</entry> - </row></tbody></tgroup></informaltable> -<para>PARAMETERS -</para> -<informaltable><tgroup cols="2"><tbody><row><entry - align="char"> -<para>int fd</para> -</entry><entry - align="char"> -<para>File descriptor returned by a previous call to open().</para> -</entry> - </row><row><entry - align="char"> -<para>int request</para> -</entry><entry - align="char"> -<para>Equals VIDEO_FREEZE for this command.</para> -</entry> - </row></tbody></tgroup></informaltable> -<para>ERRORS -</para> -<informaltable><tgroup cols="2"><tbody><row><entry - align="char"> -<para>EBADF</para> -</entry><entry - align="char"> -<para>fd is not a valid open file descriptor</para> -</entry> - </row><row><entry - align="char"> -<para>EINTERNAL</para> -</entry><entry - align="char"> -<para>Internal error, possibly in the communication with the - DVB subsystem.</para> -</entry> - </row></tbody></tgroup></informaltable> - -</section><section -role="subsection"><title>VIDEO_CONTINUE</title> -<para>DESCRIPTION -</para> -<informaltable><tgroup cols="1"><tbody><row><entry - align="char"> -<para>This ioctl call restarts decoding and playing processes of the video stream - which was played before a call to VIDEO_FREEZE was made.</para> -</entry> - </row></tbody></tgroup></informaltable> -<para>SYNOPSIS -</para> -<informaltable><tgroup cols="1"><tbody><row><entry - align="char"> -<para>int ioctl(fd, int request = VIDEO_CONTINUE);</para> -</entry> - </row></tbody></tgroup></informaltable> -<para>PARAMETERS -</para> -<informaltable><tgroup cols="2"><tbody><row><entry - align="char"> -<para>int fd</para> -</entry><entry - align="char"> -<para>File descriptor returned by a previous call to open().</para> -</entry> - </row><row><entry - align="char"> -<para>int request</para> -</entry><entry - align="char"> -<para>Equals VIDEO_CONTINUE for this command.</para> -</entry> - </row></tbody></tgroup></informaltable> -<para>ERRORS -</para> -<informaltable><tgroup cols="2"><tbody><row><entry - align="char"> -<para>EBADF</para> -</entry><entry - align="char"> -<para>fd is not a valid open file descriptor</para> -</entry> - </row><row><entry - align="char"> -<para>EINTERNAL</para> -</entry><entry - align="char"> -<para>Internal error, possibly in the communication with the - DVB subsystem.</para> -</entry> - </row></tbody></tgroup></informaltable> - -</section><section -role="subsection"><title>VIDEO_SELECT_SOURCE</title> -<para>DESCRIPTION -</para> -<informaltable><tgroup cols="1"><tbody><row><entry - align="char"> -<para>This ioctl call informs the video device which source shall be used for the input - data. The possible sources are demux or memory. If memory is selected, the - data is fed to the video device through the write command.</para> -</entry> - </row></tbody></tgroup></informaltable> -<para>SYNOPSIS -</para> -<informaltable><tgroup cols="1"><tbody><row><entry - align="char"> -<para>int ioctl(fd, int request = VIDEO_SELECT_SOURCE, - video_stream_source_t source);</para> -</entry> - </row></tbody></tgroup></informaltable> -<para>PARAMETERS -</para> -<informaltable><tgroup cols="2"><tbody><row><entry - align="char"> -<para>int fd</para> -</entry><entry - align="char"> -<para>File descriptor returned by a previous call to open().</para> -</entry> - </row><row><entry - align="char"> -<para>int request</para> -</entry><entry - align="char"> -<para>Equals VIDEO_SELECT_SOURCE for this command.</para> -</entry> - </row><row><entry - align="char"> -<para>video_stream_source_t - source</para> -</entry><entry - align="char"> -<para>Indicates which source shall be used for the Video stream.</para> -</entry> - </row></tbody></tgroup></informaltable> -<para>ERRORS -</para> -<informaltable><tgroup cols="2"><tbody><row><entry - align="char"> -<para>EBADF</para> -</entry><entry - align="char"> -<para>fd is not a valid open file descriptor</para> -</entry> - </row><row><entry - align="char"> -<para>EINTERNAL</para> -</entry><entry - align="char"> -<para>Internal error, possibly in the communication with the - DVB subsystem.</para> -</entry> - </row></tbody></tgroup></informaltable> - -</section><section -role="subsection"><title>VIDEO_SET_BLANK</title> -<para>DESCRIPTION -</para> -<informaltable><tgroup cols="1"><tbody><row><entry - align="char"> -<para>This ioctl call asks the Video Device to blank out the picture.</para> -</entry> - </row></tbody></tgroup></informaltable> -<para>SYNOPSIS -</para> -<informaltable><tgroup cols="1"><tbody><row><entry - align="char"> -<para>int ioctl(fd, int request = VIDEO_SET_BLANK, boolean - mode);</para> -</entry> - </row></tbody></tgroup></informaltable> -<para>PARAMETERS -</para> -<informaltable><tgroup cols="2"><tbody><row><entry - align="char"> -<para>int fd</para> -</entry><entry - align="char"> -<para>File descriptor returned by a previous call to open().</para> -</entry> - </row><row><entry - align="char"> -<para>int request</para> -</entry><entry - align="char"> -<para>Equals VIDEO_SET_BLANK for this command.</para> -</entry> - </row><row><entry - align="char"> -<para>boolean mode</para> -</entry><entry - align="char"> -<para>TRUE: Blank screen when stop.</para> -</entry> - </row><row><entry - align="char"> -</entry><entry - align="char"> -<para>FALSE: Show last decoded frame.</para> -</entry> - </row></tbody></tgroup></informaltable> -<para>ERRORS -</para> -<informaltable><tgroup cols="2"><tbody><row><entry - align="char"> -<para>EBADF</para> -</entry><entry - align="char"> -<para>fd is not a valid open file descriptor</para> -</entry> - </row><row><entry - align="char"> -<para>EINTERNAL</para> -</entry><entry - align="char"> -<para>Internal error, possibly in the communication with the - DVB subsystem.</para> -</entry> - </row><row><entry - align="char"> -<para>EINVAL</para> -</entry><entry - align="char"> -<para>Illegal input parameter</para> -</entry> - </row></tbody></tgroup></informaltable> - -</section><section -role="subsection"><title>VIDEO_GET_STATUS</title> -<para>DESCRIPTION -</para> -<informaltable><tgroup cols="1"><tbody><row><entry - align="char"> -<para>This ioctl call asks the Video Device to return the current status of the device.</para> -</entry> - </row></tbody></tgroup></informaltable> -<para>SYNOPSIS -</para> -<informaltable><tgroup cols="1"><tbody><row><entry - align="char"> -<para> int ioctl(fd, int request = VIDEO_GET_STATUS, struct - video_status ⋆status);</para> -</entry> - </row></tbody></tgroup></informaltable> -<para>PARAMETERS -</para> -<informaltable><tgroup cols="2"><tbody><row><entry - align="char"> -<para>int fd</para> -</entry><entry - align="char"> -<para>File descriptor returned by a previous call to open().</para> -</entry> - </row><row><entry - align="char"> -<para>int request</para> -</entry><entry - align="char"> -<para>Equals VIDEO_GET_STATUS for this command.</para> -</entry> - </row><row><entry - align="char"> -<para>struct video_status - *status</para> -</entry><entry - align="char"> -<para>Returns the current status of the Video Device.</para> -</entry> - </row></tbody></tgroup></informaltable> -<para>ERRORS -</para> -<informaltable><tgroup cols="2"><tbody><row><entry - align="char"> -<para>EBADF</para> -</entry><entry - align="char"> -<para>fd is not a valid open file descriptor</para> -</entry> - </row><row><entry - align="char"> -<para>EINTERNAL</para> -</entry><entry - align="char"> -<para>Internal error, possibly in the communication with the - DVB subsystem.</para> -</entry> - </row><row><entry - align="char"> -<para>EFAULT</para> -</entry><entry - align="char"> -<para>status points to invalid address</para> -</entry> - </row></tbody></tgroup></informaltable> - -</section><section -role="subsection"><title>VIDEO_GET_EVENT</title> -<para>DESCRIPTION -</para> -<informaltable><tgroup cols="1"><tbody><row><entry - align="char"> -<para>This ioctl call returns an event of type video_event if available. If an event is - not available, the behavior depends on whether the device is in blocking or - non-blocking mode. In the latter case, the call fails immediately with errno - set to EWOULDBLOCK. In the former case, the call blocks until an event - becomes available. The standard Linux poll() and/or select() system calls can - be used with the device file descriptor to watch for new events. For select(), - the file descriptor should be included in the exceptfds argument, and for - poll(), POLLPRI should be specified as the wake-up condition. Read-only - permissions are sufficient for this ioctl call.</para> -</entry> - </row></tbody></tgroup></informaltable> -<para>SYNOPSIS -</para> -<informaltable><tgroup cols="1"><tbody><row><entry - align="char"> -<para> int ioctl(fd, int request = VIDEO_GET_EVENT, struct - video_event ⋆ev);</para> -</entry> - </row></tbody></tgroup></informaltable> -<para>PARAMETERS -</para> -<informaltable><tgroup cols="2"><tbody><row><entry - align="char"> -<para>int fd</para> -</entry><entry - align="char"> -<para>File descriptor returned by a previous call to open().</para> -</entry> - </row><row><entry - align="char"> -<para>int request</para> -</entry><entry - align="char"> -<para>Equals VIDEO_GET_EVENT for this command.</para> -</entry> - </row><row><entry - align="char"> -<para>struct video_event - *ev</para> -</entry><entry - align="char"> -<para>Points to the location where the event, if any, is to be - stored.</para> -</entry> - </row></tbody></tgroup></informaltable> -<para>ERRORS -</para> -<informaltable><tgroup cols="2"><tbody><row><entry - align="char"> -<para>EBADF</para> -</entry><entry - align="char"> -<para>fd is not a valid open file descriptor</para> -</entry> - </row><row><entry - align="char"> -<para>EFAULT</para> -</entry><entry - align="char"> -<para>ev points to invalid address</para> -</entry> - </row><row><entry - align="char"> -<para>EWOULDBLOCK</para> -</entry><entry - align="char"> -<para>There is no event pending, and the device is in - non-blocking mode.</para> -</entry> - </row><row><entry - align="char"> -<para>EOVERFLOW</para> -</entry><entry - align="char"> -</entry> - </row><row><entry - align="char"> -</entry><entry - align="char"> -<para>Overflow in event queue - one or more events were lost.</para> -</entry> - </row></tbody></tgroup></informaltable> - -</section><section -role="subsection"><title>VIDEO_SET_DISPLAY_FORMAT</title> -<para>DESCRIPTION -</para> -<informaltable><tgroup cols="1"><tbody><row><entry - align="char"> -<para>This ioctl call asks the Video Device to select the video format to be applied - by the MPEG chip on the video.</para> -</entry> - </row></tbody></tgroup></informaltable> -<para>SYNOPSIS -</para> -<informaltable><tgroup cols="1"><tbody><row><entry - align="char"> -<para> int ioctl(fd, int request = - VIDEO_SET_DISPLAY_FORMAT, video_display_format_t - format);</para> -</entry> - </row></tbody></tgroup></informaltable> -<para>PARAMETERS -</para> -<informaltable><tgroup cols="2"><tbody><row><entry - align="char"> -<para>int fd</para> -</entry><entry - align="char"> -<para>File descriptor returned by a previous call to open().</para> -</entry> - </row><row><entry - align="char"> -<para>int request</para> -</entry><entry - align="char"> -<para>Equals VIDEO_SET_DISPLAY_FORMAT for this - command.</para> -</entry> - </row><row><entry - align="char"> -<para>video_display_format_t - format</para> -</entry><entry - align="char"> -<para>Selects the video format to be used.</para> -</entry> - </row></tbody></tgroup></informaltable> -<para>ERRORS -</para> -<informaltable><tgroup cols="2"><tbody><row><entry - align="char"> -<para>EBADF</para> -</entry><entry - align="char"> -<para>fd is not a valid open file descriptor</para> -</entry> - </row><row><entry - align="char"> -<para>EINTERNAL</para> -</entry><entry - align="char"> -<para>Internal error.</para> -</entry> - </row><row><entry - align="char"> -<para>EINVAL</para> -</entry><entry - align="char"> -<para>Illegal parameter format.</para> -</entry> - </row></tbody></tgroup></informaltable> - -</section><section -role="subsection"><title>VIDEO_STILLPICTURE</title> -<para>DESCRIPTION -</para> -<informaltable><tgroup cols="1"><tbody><row><entry - align="char"> -<para>This ioctl call asks the Video Device to display a still picture (I-frame). The - input data shall contain an I-frame. If the pointer is NULL, then the current - displayed still picture is blanked.</para> -</entry> - </row></tbody></tgroup></informaltable> -<para>SYNOPSIS -</para> -<informaltable><tgroup cols="1"><tbody><row><entry - align="char"> -<para>int ioctl(fd, int request = VIDEO_STILLPICTURE, - struct video_still_picture ⋆sp);</para> -</entry> - </row></tbody></tgroup></informaltable> -<para>PARAMETERS -</para> -<informaltable><tgroup cols="2"><tbody><row><entry - align="char"> -<para>int fd</para> -</entry><entry - align="char"> -<para>File descriptor returned by a previous call to open().</para> -</entry> - </row><row><entry - align="char"> -<para>int request</para> -</entry><entry - align="char"> -<para>Equals VIDEO_STILLPICTURE for this command.</para> -</entry> - </row><row><entry - align="char"> -<para>struct - video_still_picture - *sp</para> -</entry><entry - align="char"> -<para>Pointer to a location where an I-frame and size is stored.</para> -</entry> - </row></tbody></tgroup></informaltable> -<para>ERRORS -</para> -<informaltable><tgroup cols="2"><tbody><row><entry - align="char"> -<para>EBADF</para> -</entry><entry - align="char"> -<para>fd is not a valid open file descriptor</para> -</entry> - </row><row><entry - align="char"> -<para>EINTERNAL</para> -</entry><entry - align="char"> -<para>Internal error.</para> -</entry> - </row><row><entry - align="char"> -<para>EFAULT</para> -</entry><entry - align="char"> -<para>sp points to an invalid iframe.</para> -</entry> - </row></tbody></tgroup></informaltable> - -</section><section -role="subsection"><title>VIDEO_FAST_FORWARD</title> -<para>DESCRIPTION -</para> -<informaltable><tgroup cols="1"><tbody><row><entry - align="char"> -<para>This ioctl call asks the Video Device to skip decoding of N number of I-frames. - This call can only be used if VIDEO_SOURCE_MEMORY is selected.</para> -</entry> - </row></tbody></tgroup></informaltable> -<para>SYNOPSIS -</para> -<informaltable><tgroup cols="1"><tbody><row><entry - align="char"> -<para>int ioctl(fd, int request = VIDEO_FAST_FORWARD, int - nFrames);</para> -</entry> - </row></tbody></tgroup></informaltable> -<para>PARAMETERS -</para> -<informaltable><tgroup cols="2"><tbody><row><entry - align="char"> -<para>int fd</para> -</entry><entry - align="char"> -<para>File descriptor returned by a previous call to open().</para> -</entry> - </row><row><entry - align="char"> -<para>int request</para> -</entry><entry - align="char"> -<para>Equals VIDEO_FAST_FORWARD for this command.</para> -</entry> - </row><row><entry - align="char"> -<para>int nFrames</para> -</entry><entry - align="char"> -<para>The number of frames to skip.</para> -</entry> - </row></tbody></tgroup></informaltable> -<para>ERRORS -</para> -<informaltable><tgroup cols="2"><tbody><row><entry - align="char"> -<para>EBADF</para> -</entry><entry - align="char"> -<para>fd is not a valid open file descriptor</para> -</entry> - </row><row><entry - align="char"> -<para>EINTERNAL</para> -</entry><entry - align="char"> -<para>Internal error.</para> -</entry> - </row><row><entry - align="char"> -<para>EPERM</para> -</entry><entry - align="char"> -<para>Mode VIDEO_SOURCE_MEMORY not selected.</para> -</entry> - </row><row><entry - align="char"> -<para>EINVAL</para> -</entry><entry - align="char"> -<para>Illegal parameter format.</para> -</entry> - </row></tbody></tgroup></informaltable> - -</section><section -role="subsection"><title>VIDEO_SLOWMOTION</title> -<para>DESCRIPTION -</para> -<informaltable><tgroup cols="1"><tbody><row><entry - align="char"> -<para>This ioctl call asks the video device to repeat decoding frames N number of - times. This call can only be used if VIDEO_SOURCE_MEMORY is selected.</para> -</entry> - </row></tbody></tgroup></informaltable> -<para>SYNOPSIS -</para> -<informaltable><tgroup cols="1"><tbody><row><entry - align="char"> -<para>int ioctl(fd, int request = VIDEO_SLOWMOTION, int - nFrames);</para> -</entry> - </row></tbody></tgroup></informaltable> -<para>PARAMETERS -</para> -<informaltable><tgroup cols="2"><tbody><row><entry - align="char"> -<para>int fd</para> -</entry><entry - align="char"> -<para>File descriptor returned by a previous call to open().</para> -</entry> - </row><row><entry - align="char"> -<para>int request</para> -</entry><entry - align="char"> -<para>Equals VIDEO_SLOWMOTION for this command.</para> -</entry> - </row><row><entry - align="char"> -<para>int nFrames</para> -</entry><entry - align="char"> -<para>The number of times to repeat each frame.</para> -</entry> - </row></tbody></tgroup></informaltable> -<para>ERRORS -</para> -<informaltable><tgroup cols="2"><tbody><row><entry - align="char"> -<para>EBADF</para> -</entry><entry - align="char"> -<para>fd is not a valid open file descriptor</para> -</entry> - </row><row><entry - align="char"> -<para>EINTERNAL</para> -</entry><entry - align="char"> -<para>Internal error.</para> -</entry> - </row><row><entry - align="char"> -<para>EPERM</para> -</entry><entry - align="char"> -<para>Mode VIDEO_SOURCE_MEMORY not selected.</para> -</entry> - </row><row><entry - align="char"> -<para>EINVAL</para> -</entry><entry - align="char"> -<para>Illegal parameter format.</para> -</entry> - </row></tbody></tgroup></informaltable> - -</section><section -role="subsection"><title>VIDEO_GET_CAPABILITIES</title> -<para>DESCRIPTION -</para> -<informaltable><tgroup cols="1"><tbody><row><entry - align="char"> -<para>This ioctl call asks the video device about its decoding capabilities. On success - it returns and integer which has bits set according to the defines in section ??.</para> -</entry> - </row></tbody></tgroup></informaltable> -<para>SYNOPSIS -</para> -<informaltable><tgroup cols="1"><tbody><row><entry - align="char"> -<para>int ioctl(fd, int request = VIDEO_GET_CAPABILITIES, - unsigned int ⋆cap);</para> -</entry> - </row></tbody></tgroup></informaltable> -<para>PARAMETERS -</para> -<informaltable><tgroup cols="2"><tbody><row><entry - align="char"> -<para>int fd</para> -</entry><entry - align="char"> -<para>File descriptor returned by a previous call to open().</para> -</entry> - </row><row><entry - align="char"> -<para>int request</para> -</entry><entry - align="char"> -<para>Equals VIDEO_GET_CAPABILITIES for this - command.</para> -</entry> - </row><row><entry - align="char"> -<para>unsigned int *cap</para> -</entry><entry - align="char"> -<para>Pointer to a location where to store the capability - information.</para> -</entry> - </row></tbody></tgroup></informaltable> -<para>ERRORS -</para> -<informaltable><tgroup cols="2"><tbody><row><entry - align="char"> -<para>EBADF</para> -</entry><entry - align="char"> -<para>fd is not a valid open file descriptor</para> -</entry> - </row><row><entry - align="char"> -<para>EFAULT</para> -</entry><entry - align="char"> -<para>cap points to an invalid iframe.</para> -</entry> - </row></tbody></tgroup></informaltable> - -</section><section -role="subsection"><title>VIDEO_SET_ID</title> -<para>DESCRIPTION -</para> -<informaltable><tgroup cols="1"><tbody><row><entry - align="char"> -<para>This ioctl selects which sub-stream is to be decoded if a program or system - stream is sent to the video device.</para> -</entry> - </row></tbody></tgroup></informaltable> -<para>SYNOPSIS -</para> -<informaltable><tgroup cols="1"><tbody><row><entry - align="char"> -<para>int ioctl(int fd, int request = VIDEO_SET_ID, int - id);</para> -</entry> - </row></tbody></tgroup></informaltable> -<para>PARAMETERS -</para> -<informaltable><tgroup cols="2"><tbody><row><entry - align="char"> -<para>int fd</para> -</entry><entry - align="char"> -<para>File descriptor returned by a previous call to open().</para> -</entry> - </row><row><entry - align="char"> -<para>int request</para> -</entry><entry - align="char"> -<para>Equals VIDEO_SET_ID for this command.</para> -</entry> - </row><row><entry - align="char"> -<para>int id</para> -</entry><entry - align="char"> -<para>video sub-stream id</para> -</entry> - </row></tbody></tgroup></informaltable> -<para>ERRORS -</para> -<informaltable><tgroup cols="2"><tbody><row><entry - align="char"> -<para>EBADF</para> -</entry><entry - align="char"> -<para>fd is not a valid open file descriptor.</para> -</entry> - </row><row><entry - align="char"> -<para>EINTERNAL</para> -</entry><entry - align="char"> -<para>Internal error.</para> -</entry> - </row><row><entry - align="char"> -<para>EINVAL</para> -</entry><entry - align="char"> -<para>Invalid sub-stream id.</para> -</entry> - </row></tbody></tgroup></informaltable> - -</section><section -role="subsection"><title>VIDEO_CLEAR_BUFFER</title> -<para>DESCRIPTION -</para> -<informaltable><tgroup cols="1"><tbody><row><entry - align="char"> -<para>This ioctl call clears all video buffers in the driver and in the decoder hardware.</para> -</entry> - </row></tbody></tgroup></informaltable> -<para>SYNOPSIS -</para> -<informaltable><tgroup cols="1"><tbody><row><entry - align="char"> -<para>int ioctl(fd, int request = VIDEO_CLEAR_BUFFER);</para> -</entry> - </row></tbody></tgroup></informaltable> -<para>PARAMETERS -</para> -<informaltable><tgroup cols="2"><tbody><row><entry - align="char"> -<para>int fd</para> -</entry><entry - align="char"> -<para>File descriptor returned by a previous call to open().</para> -</entry> - </row><row><entry - align="char"> -<para>int request</para> -</entry><entry - align="char"> -<para>Equals VIDEO_CLEAR_BUFFER for this command.</para> -</entry> - </row></tbody></tgroup></informaltable> -<para>ERRORS -</para> -<informaltable><tgroup cols="2"><tbody><row><entry - align="char"> -<para>EBADF</para> -</entry><entry - align="char"> -<para>fd is not a valid open file descriptor</para> -</entry> - </row></tbody></tgroup></informaltable> - -</section><section -role="subsection"><title>VIDEO_SET_STREAMTYPE</title> -<para>DESCRIPTION -</para> -<informaltable><tgroup cols="1"><tbody><row><entry - align="char"> -<para>This ioctl tells the driver which kind of stream to expect being written to it. If - this call is not used the default of video PES is used. Some drivers might not - support this call and always expect PES.</para> -</entry> - </row></tbody></tgroup></informaltable> -<para>SYNOPSIS -</para> -<informaltable><tgroup cols="1"><tbody><row><entry - align="char"> -<para>int ioctl(fd, int request = VIDEO_SET_STREAMTYPE, - int type);</para> -</entry> - </row></tbody></tgroup></informaltable> -<para>PARAMETERS -</para> -<informaltable><tgroup cols="2"><tbody><row><entry - align="char"> -<para>int fd</para> -</entry><entry - align="char"> -<para>File descriptor returned by a previous call to open().</para> -</entry> - </row><row><entry - align="char"> -<para>int request</para> -</entry><entry - align="char"> -<para>Equals VIDEO_SET_STREAMTYPE for this command.</para> -</entry> - </row><row><entry - align="char"> -<para>int type</para> -</entry><entry - align="char"> -<para>stream type</para> -</entry> - </row></tbody></tgroup></informaltable> -<para>ERRORS -</para> -<informaltable><tgroup cols="2"><tbody><row><entry - align="char"> -<para>EBADF</para> -</entry><entry - align="char"> -<para>fd is not a valid open file descriptor</para> -</entry> - </row><row><entry - align="char"> -<para>EINVAL</para> -</entry><entry - align="char"> -<para>type is not a valid or supported stream type.</para> -</entry> - </row></tbody></tgroup></informaltable> - -</section><section -role="subsection"><title>VIDEO_SET_FORMAT</title> -<para>DESCRIPTION -</para> -<informaltable><tgroup cols="1"><tbody><row><entry - align="char"> -<para>This ioctl sets the screen format (aspect ratio) of the connected output device - (TV) so that the output of the decoder can be adjusted accordingly.</para> -</entry> - </row></tbody></tgroup></informaltable> -<para>SYNOPSIS -</para> -<informaltable><tgroup cols="1"><tbody><row><entry - align="char"> -<para> int ioctl(fd, int request = VIDEO_SET_FORMAT, - video_format_t format);</para> -</entry> - </row></tbody></tgroup></informaltable> -<para>PARAMETERS -</para> -<informaltable><tgroup cols="2"><tbody><row><entry - align="char"> -<para>int fd</para> -</entry><entry - align="char"> -<para>File descriptor returned by a previous call to open().</para> -</entry> - </row><row><entry - align="char"> -<para>int request</para> -</entry><entry - align="char"> -<para>Equals VIDEO_SET_FORMAT for this command.</para> -</entry> - </row><row><entry - align="char"> -<para>video_format_t - format</para> -</entry><entry - align="char"> -<para>video format of TV as defined in section ??.</para> -</entry> - </row></tbody></tgroup></informaltable> -<para>ERRORS -</para> -<informaltable><tgroup cols="2"><tbody><row><entry - align="char"> -<para>EBADF</para> -</entry><entry - align="char"> -<para>fd is not a valid open file descriptor</para> -</entry> - </row><row><entry - align="char"> -<para>EINVAL</para> -</entry><entry - align="char"> -<para>format is not a valid video format.</para> -</entry> - </row></tbody></tgroup></informaltable> - -</section><section -role="subsection"><title>VIDEO_SET_SYSTEM</title> -<para>DESCRIPTION -</para> -<informaltable><tgroup cols="1"><tbody><row><entry - align="char"> -<para>This ioctl sets the television output format. The format (see section ??) may - vary from the color format of the displayed MPEG stream. If the hardware is - not able to display the requested format the call will return an error.</para> -</entry> - </row></tbody></tgroup></informaltable> -<para>SYNOPSIS -</para> -<informaltable><tgroup cols="1"><tbody><row><entry - align="char"> -<para> int ioctl(fd, int request = VIDEO_SET_SYSTEM , - video_system_t system);</para> -</entry> - </row></tbody></tgroup></informaltable> -<para>PARAMETERS -</para> -<informaltable><tgroup cols="2"><tbody><row><entry - align="char"> -<para>int fd</para> -</entry><entry - align="char"> -<para>File descriptor returned by a previous call to open().</para> -</entry> - </row><row><entry - align="char"> -<para>int request</para> -</entry><entry - align="char"> -<para>Equals VIDEO_SET_FORMAT for this command.</para> -</entry> - </row><row><entry - align="char"> -<para>video_system_t - system</para> -</entry><entry - align="char"> -<para>video system of TV output.</para> -</entry> - </row></tbody></tgroup></informaltable> -<para>ERRORS -</para> -<informaltable><tgroup cols="2"><tbody><row><entry - align="char"> -<para>EBADF</para> -</entry><entry - align="char"> -<para>fd is not a valid open file descriptor</para> -</entry> - </row><row><entry - align="char"> -<para>EINVAL</para> -</entry><entry - align="char"> -<para>system is not a valid or supported video system.</para> -</entry> - </row></tbody></tgroup></informaltable> - -</section><section -role="subsection"><title>VIDEO_SET_HIGHLIGHT</title> -<para>DESCRIPTION -</para> -<informaltable><tgroup cols="1"><tbody><row><entry - align="char"> -<para>This ioctl sets the SPU highlight information for the menu access of a DVD.</para> -</entry> - </row></tbody></tgroup></informaltable> -<para>SYNOPSIS -</para> -<informaltable><tgroup cols="1"><tbody><row><entry - align="char"> -<para> int ioctl(fd, int request = VIDEO_SET_HIGHLIGHT - ,video_highlight_t ⋆vhilite)</para> -</entry> - </row></tbody></tgroup></informaltable> -<para>PARAMETERS -</para> -<informaltable><tgroup cols="2"><tbody><row><entry - align="char"> -<para>int fd</para> -</entry><entry - align="char"> -<para>File descriptor returned by a previous call to open().</para> -</entry> - </row><row><entry - align="char"> -<para>int request</para> -</entry><entry - align="char"> -<para>Equals VIDEO_SET_HIGHLIGHT for this command.</para> -</entry> - </row><row><entry - align="char"> -<para>video_highlight_t - *vhilite</para> -</entry><entry - align="char"> -<para>SPU Highlight information according to section ??.</para> -</entry> - </row></tbody></tgroup></informaltable> -<para>ERRORS -</para> -<informaltable><tgroup cols="2"><tbody><row><entry - align="char"> -<para>EBADF</para> -</entry><entry - align="char"> -<para>fd is not a valid open file descriptor.</para> -</entry> - </row><row><entry - align="char"> -<para>EINVAL</para> -</entry><entry - align="char"> -<para>input is not a valid highlight setting.</para> -</entry> - </row></tbody></tgroup></informaltable> - -</section><section -role="subsection"><title>VIDEO_SET_SPU</title> -<para>DESCRIPTION -</para> -<informaltable><tgroup cols="1"><tbody><row><entry - align="char"> -<para>This ioctl activates or deactivates SPU decoding in a DVD input stream. It can - only be used, if the driver is able to handle a DVD stream.</para> -</entry> - </row></tbody></tgroup></informaltable> -<para>SYNOPSIS -</para> -<informaltable><tgroup cols="1"><tbody><row><entry - align="char"> -<para> int ioctl(fd, int request = VIDEO_SET_SPU , - video_spu_t ⋆spu)</para> -</entry> - </row></tbody></tgroup></informaltable> -<para>PARAMETERS -</para> -<informaltable><tgroup cols="2"><tbody><row><entry - align="char"> -<para>int fd</para> -</entry><entry - align="char"> -<para>File descriptor returned by a previous call to open().</para> -</entry> - </row><row><entry - align="char"> -<para>int request</para> -</entry><entry - align="char"> -<para>Equals VIDEO_SET_SPU for this command.</para> -</entry> - </row><row><entry - align="char"> -<para>video_spu_t *spu</para> -</entry><entry - align="char"> -<para>SPU decoding (de)activation and subid setting according - to section ??.</para> -</entry> - </row></tbody></tgroup></informaltable> -<para>ERRORS -</para> -<informaltable><tgroup cols="2"><tbody><row><entry - align="char"> -<para>EBADF</para> -</entry><entry - align="char"> -<para>fd is not a valid open file descriptor</para> -</entry> - </row><row><entry - align="char"> -<para>EINVAL</para> -</entry><entry - align="char"> -<para>input is not a valid spu setting or driver cannot handle - SPU.</para> -</entry> - </row></tbody></tgroup></informaltable> - -</section><section -role="subsection"><title>VIDEO_SET_SPU_PALETTE</title> -<para>DESCRIPTION -</para> -<informaltable><tgroup cols="1"><tbody><row><entry - align="char"> -<para>This ioctl sets the SPU color palette.</para> -</entry> - </row></tbody></tgroup></informaltable> -<para>SYNOPSIS -</para> -<informaltable><tgroup cols="1"><tbody><row><entry - align="char"> -<para> int ioctl(fd, int request = VIDEO_SET_SPU_PALETTE - ,video_spu_palette_t ⋆palette )</para> -</entry> - </row></tbody></tgroup></informaltable> -<para>PARAMETERS -</para> -<informaltable><tgroup cols="2"><tbody><row><entry - align="char"> -<para>int fd</para> -</entry><entry - align="char"> -<para>File descriptor returned by a previous call to open().</para> -</entry> - </row><row><entry - align="char"> -<para>int request</para> -</entry><entry - align="char"> -<para>Equals VIDEO_SET_SPU_PALETTE for this command.</para> -</entry> - </row><row><entry - align="char"> -<para>video_spu_palette_t - *palette</para> -</entry><entry - align="char"> -<para>SPU palette according to section ??.</para> -</entry> - </row></tbody></tgroup></informaltable> -<para>ERRORS -</para> -<informaltable><tgroup cols="2"><tbody><row><entry - align="char"> -<para>EBADF</para> -</entry><entry - align="char"> -<para>fd is not a valid open file descriptor</para> -</entry> - </row><row><entry - align="char"> -<para>EINVAL</para> -</entry><entry - align="char"> -<para>input is not a valid palette or driver doesn’t handle SPU.</para> -</entry> - </row></tbody></tgroup></informaltable> - -</section><section -role="subsection"><title>VIDEO_GET_NAVI</title> -<para>DESCRIPTION -</para> -<informaltable><tgroup cols="1"><tbody><row><entry - align="char"> -<para>This ioctl returns navigational information from the DVD stream. This is - especially needed if an encoded stream has to be decoded by the hardware.</para> -</entry> - </row></tbody></tgroup></informaltable> -<para>SYNOPSIS -</para> -<informaltable><tgroup cols="1"><tbody><row><entry - align="char"> -<para> int ioctl(fd, int request = VIDEO_GET_NAVI , - video_navi_pack_t ⋆navipack)</para> -</entry> - </row></tbody></tgroup></informaltable> -<para>PARAMETERS -</para> -<informaltable><tgroup cols="2"><tbody><row><entry - align="char"> -<para>int fd</para> -</entry><entry - align="char"> -<para>File descriptor returned by a previous call to open().</para> -</entry> - </row><row><entry - align="char"> -<para>int request</para> -</entry><entry - align="char"> -<para>Equals VIDEO_GET_NAVI for this command.</para> -</entry> - </row><row><entry - align="char"> -<para>video_navi_pack_t - *navipack</para> -</entry><entry - align="char"> -<para>PCI or DSI pack (private stream 2) according to section - ??.</para> -</entry> - </row></tbody></tgroup></informaltable> -<para>ERRORS -</para> -<informaltable><tgroup cols="2"><tbody><row><entry - align="char"> -<para>EBADF</para> -</entry><entry - align="char"> -<para>fd is not a valid open file descriptor</para> -</entry> - </row><row><entry - align="char"> -<para>EFAULT</para> -</entry><entry - align="char"> -<para>driver is not able to return navigational information</para> -</entry> - </row></tbody></tgroup></informaltable> - -</section><section -role="subsection"><title>VIDEO_SET_ATTRIBUTES</title> -<para>DESCRIPTION -</para> -<informaltable><tgroup cols="1"><tbody><row><entry - align="char"> -<para>This ioctl is intended for DVD playback and allows you to set certain - information about the stream. Some hardware may not need this information, - but the call also tells the hardware to prepare for DVD playback.</para> -</entry> - </row></tbody></tgroup></informaltable> -<para>SYNOPSIS -</para> -<informaltable><tgroup cols="1"><tbody><row><entry - align="char"> -<para> int ioctl(fd, int request = VIDEO_SET_ATTRIBUTE - ,video_attributes_t vattr)</para> -</entry> - </row></tbody></tgroup></informaltable> -<para>PARAMETERS -</para> -<informaltable><tgroup cols="2"><tbody><row><entry - align="char"> -<para>int fd</para> -</entry><entry - align="char"> -<para>File descriptor returned by a previous call to open().</para> -</entry> - </row><row><entry - align="char"> -<para>int request</para> -</entry><entry - align="char"> -<para>Equals VIDEO_SET_ATTRIBUTE for this command.</para> -</entry> - </row><row><entry - align="char"> -<para>video_attributes_t - vattr</para> -</entry><entry - align="char"> -<para>video attributes according to section ??.</para> -</entry> - </row></tbody></tgroup></informaltable> -<para>ERRORS -</para> -<informaltable><tgroup cols="2"><tbody><row><entry - align="char"> -<para>EBADF</para> -</entry><entry - align="char"> -<para>fd is not a valid open file descriptor</para> -</entry> - </row><row><entry - align="char"> -<para>EINVAL</para> -</entry><entry - align="char"> -<para>input is not a valid attribute setting.</para> -</entry> - </row></tbody></tgroup></informaltable> - </section></section> |