diff options
Diffstat (limited to 'linux/drivers/media/dvb/dvb-usb')
32 files changed, 1141 insertions, 157 deletions
diff --git a/linux/drivers/media/dvb/dvb-usb/Kconfig b/linux/drivers/media/dvb/dvb-usb/Kconfig index 3c8493d20..3f7b9b632 100644 --- a/linux/drivers/media/dvb/dvb-usb/Kconfig +++ b/linux/drivers/media/dvb/dvb-usb/Kconfig @@ -1,6 +1,7 @@ config DVB_USB tristate "Support for various USB DVB devices" - depends on DVB_CORE && USB && I2C + depends on DVB_CORE && USB && I2C && INPUT + depends on HOTPLUG # due to FW_LOADER select FW_LOADER help By enabling this you will be able to choose the various supported @@ -25,7 +26,7 @@ config DVB_USB_A800 tristate "AVerMedia AverTV DVB-T USB 2.0 (A800)" depends on DVB_USB select DVB_DIB3000MC - select DVB_TUNER_MT2060 if !DVB_FE_CUSTOMISE + select MEDIA_TUNER_MT2060 if !DVB_FE_CUSTOMISE select DVB_PLL if !DVB_FE_CUSTOMISE help Say Y here to support the AVerMedia AverTV DVB-T USB 2.0 (A800) receiver. @@ -35,7 +36,7 @@ config DVB_USB_DIBUSB_MB depends on DVB_USB select DVB_PLL if !DVB_FE_CUSTOMISE select DVB_DIB3000MB - select DVB_TUNER_MT2060 if !DVB_FE_CUSTOMISE + select MEDIA_TUNER_MT2060 if !DVB_FE_CUSTOMISE help Support for USB 1.1 and 2.0 DVB-T receivers based on reference designs made by DiBcom (<http://www.dibcom.fr>) equipped with a DiB3000M-B demodulator. @@ -56,7 +57,7 @@ config DVB_USB_DIBUSB_MC tristate "DiBcom USB DVB-T devices (based on the DiB3000M-C/P) (see help for device list)" depends on DVB_USB select DVB_DIB3000MC - select DVB_TUNER_MT2060 if !DVB_FE_CUSTOMISE + select MEDIA_TUNER_MT2060 if !DVB_FE_CUSTOMISE help Support for USB2.0 DVB-T receivers based on reference designs made by DiBcom (<http://www.dibcom.fr>) equipped with a DiB3000M-C/P demodulator. @@ -73,8 +74,8 @@ config DVB_USB_DIB0700 select DVB_DIB7000P select DVB_DIB7000M select DVB_DIB3000MC - select DVB_TUNER_MT2060 if !DVB_FE_CUSTOMISE - select DVB_TUNER_MT2266 if !DVB_FE_CUSTOMISE + select MEDIA_TUNER_MT2060 if !DVB_FE_CUSTOMISE + select MEDIA_TUNER_MT2266 if !DVB_FE_CUSTOMISE select DVB_TUNER_DIB0070 help Support for USB2.0/1.1 DVB receivers based on the DiB0700 USB bridge. The @@ -93,7 +94,7 @@ config DVB_USB_UMT_010 depends on DVB_USB select DVB_PLL if !DVB_FE_CUSTOMISE select DVB_DIB3000MC - select DVB_TUNER_MT2060 if !DVB_FE_CUSTOMISE + select MEDIA_TUNER_MT2060 if !DVB_FE_CUSTOMISE help Say Y here to support the HanfTek UMT-010 USB2.0 stick-sized DVB-T receiver. @@ -105,7 +106,7 @@ config DVB_USB_CXUSB select DVB_LGDT330X if !DVB_FE_CUSTOMISE select DVB_MT352 if !DVB_FE_CUSTOMISE select DVB_ZL10353 if !DVB_FE_CUSTOMISE - select TUNER_SIMPLE if !DVB_FE_CUSTOMISE + select MEDIA_TUNER_SIMPLE if !DVB_FE_CUSTOMISE help Say Y here to support the Conexant USB2.0 hybrid reference design. Currently, only DVB and ATSC modes are supported, analog mode @@ -118,7 +119,7 @@ config DVB_USB_M920X tristate "Uli m920x DVB-T USB2.0 support" depends on DVB_USB select DVB_MT352 if !DVB_FE_CUSTOMISE - select DVB_TUNER_QT1010 if !DVB_FE_CUSTOMISE + select MEDIA_TUNER_QT1010 if !DVB_FE_CUSTOMISE help Say Y here to support the MSI Mega Sky 580 USB2.0 DVB-T receiver. Currently, only devices with a product id of @@ -129,7 +130,7 @@ config DVB_USB_GL861 tristate "Genesys Logic GL861 USB2.0 support" depends on DVB_USB select DVB_ZL10353 if !DVB_FE_CUSTOMISE - select DVB_TUNER_QT1010 if !DVB_FE_CUSTOMISE + select MEDIA_TUNER_QT1010 if !DVB_FE_CUSTOMISE help Say Y here to support the MSI Megasky 580 (55801) DVB-T USB2.0 receiver with USB ID 0db0:5581. @@ -138,7 +139,7 @@ config DVB_USB_AU6610 tristate "Alcor Micro AU6610 USB2.0 support" depends on DVB_USB select DVB_ZL10353 if !DVB_FE_CUSTOMISE - select DVB_TUNER_QT1010 if !DVB_FE_CUSTOMISE + select MEDIA_TUNER_QT1010 if !DVB_FE_CUSTOMISE help Say Y here to support the Sigmatek DVB-110 DVB-T USB2.0 receiver. @@ -190,7 +191,7 @@ config DVB_USB_NOVA_T_USB2 tristate "Hauppauge WinTV-NOVA-T usb2 DVB-T USB2.0 support" depends on DVB_USB select DVB_DIB3000MC - select DVB_TUNER_MT2060 if !DVB_FE_CUSTOMISE + select MEDIA_TUNER_MT2060 if !DVB_FE_CUSTOMISE select DVB_PLL if !DVB_FE_CUSTOMISE help Say Y here to support the Hauppauge WinTV-NOVA-T usb2 DVB-T USB2.0 receiver. @@ -227,8 +228,8 @@ config DVB_USB_OPERA1 config DVB_USB_AF9005 tristate "Afatech AF9005 DVB-T USB1.1 support" depends on DVB_USB && EXPERIMENTAL - select DVB_TUNER_MT2060 if !DVB_FE_CUSTOMISE - select DVB_TUNER_QT1010 if !DVB_FE_CUSTOMISE + select MEDIA_TUNER_MT2060 if !DVB_FE_CUSTOMISE + select MEDIA_TUNER_QT1010 if !DVB_FE_CUSTOMISE help Say Y here to support the Afatech AF9005 based DVB-T USB1.1 receiver and the TerraTec Cinergy T USB XE (Rev.1) @@ -240,3 +241,12 @@ config DVB_USB_AF9005_REMOTE Say Y here to support the default remote control decoding for the Afatech AF9005 based receiver. +config DVB_USB_ANYSEE + tristate "Anysee DVB-T/C USB2.0 support" + depends on DVB_USB + select DVB_MT352 if !DVB_FE_CUSTOMISE + select DVB_ZL10353 if !DVB_FE_CUSTOMISE + select DVB_TDA10023 if !DVB_FE_CUSTOMISE + help + Say Y here to support the Anysee E30, Anysee E30 Plus or + Anysee E30 C Plus DVB USB2.0 receiver. diff --git a/linux/drivers/media/dvb/dvb-usb/Makefile b/linux/drivers/media/dvb/dvb-usb/Makefile index 60a910052..44c11e45e 100644 --- a/linux/drivers/media/dvb/dvb-usb/Makefile +++ b/linux/drivers/media/dvb/dvb-usb/Makefile @@ -61,7 +61,10 @@ obj-$(CONFIG_DVB_USB_AF9005) += dvb-usb-af9005.o dvb-usb-af9005-remote-objs = af9005-remote.o obj-$(CONFIG_DVB_USB_AF9005_REMOTE) += dvb-usb-af9005-remote.o +dvb-usb-anysee-objs = anysee.o +obj-$(CONFIG_DVB_USB_ANYSEE) += dvb-usb-anysee.o + EXTRA_CFLAGS += -Idrivers/media/dvb/dvb-core/ -Idrivers/media/dvb/frontends/ # due to tuner-xc3028 -EXTRA_CFLAGS += -Idrivers/media/video +EXTRA_CFLAGS += -Idrivers/media/common/tuners diff --git a/linux/drivers/media/dvb/dvb-usb/a800.c b/linux/drivers/media/dvb/dvb-usb/a800.c index 16df0a3f9..de7194ee7 100644 --- a/linux/drivers/media/dvb/dvb-usb/a800.c +++ b/linux/drivers/media/dvb/dvb-usb/a800.c @@ -18,6 +18,9 @@ static int debug; module_param(debug, int, 0644); MODULE_PARM_DESC(debug, "set debugging level (rc=1 (or-able))." DVB_USB_DEBUG_STATUS); + +DVB_DEFINE_MOD_OPT_ADAPTER_NR(adapter_nr); + #define deb_rc(args...) dprintk(debug,0x01,args) static int a800_power_ctrl(struct dvb_usb_device *d, int onoff) @@ -94,7 +97,8 @@ static struct dvb_usb_device_properties a800_properties; static int a800_probe(struct usb_interface *intf, const struct usb_device_id *id) { - return dvb_usb_device_init(intf,&a800_properties,THIS_MODULE,NULL); + return dvb_usb_device_init(intf, &a800_properties, + THIS_MODULE, NULL, adapter_nr); } /* do not change the order of the ID table */ diff --git a/linux/drivers/media/dvb/dvb-usb/af9005.c b/linux/drivers/media/dvb/dvb-usb/af9005.c index 042bccd0e..04270dd3d 100644 --- a/linux/drivers/media/dvb/dvb-usb/af9005.c +++ b/linux/drivers/media/dvb/dvb-usb/af9005.c @@ -39,6 +39,8 @@ int dvb_usb_af9005_dump_eeprom = 0; module_param_named(dump_eeprom, dvb_usb_af9005_dump_eeprom, int, 0); MODULE_PARM_DESC(dump_eeprom, "dump contents of the eeprom."); +DVB_DEFINE_MOD_OPT_ADAPTER_NR(adapter_nr); + /* remote control decoder */ int (*rc_decode) (struct dvb_usb_device * d, u8 * data, int len, u32 * event, int *state); @@ -1020,7 +1022,8 @@ static struct dvb_usb_device_properties af9005_properties; static int af9005_usb_probe(struct usb_interface *intf, const struct usb_device_id *id) { - return dvb_usb_device_init(intf, &af9005_properties, THIS_MODULE, NULL); + return dvb_usb_device_init(intf, &af9005_properties, + THIS_MODULE, NULL, adapter_nr); } static struct usb_device_id af9005_usb_table[] = { diff --git a/linux/drivers/media/dvb/dvb-usb/anysee.c b/linux/drivers/media/dvb/dvb-usb/anysee.c new file mode 100644 index 000000000..89675dbf7 --- /dev/null +++ b/linux/drivers/media/dvb/dvb-usb/anysee.c @@ -0,0 +1,558 @@ +/* + * DVB USB Linux driver for Anysee E30 DVB-C & DVB-T USB2.0 receiver + * + * Copyright (C) 2007 Antti Palosaari <crope@iki.fi> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. + * + * TODO: + * - add smart card reader support for Conditional Access (CA) + * + * Card reader in Anysee is nothing more than ISO 7816 card reader. + * There is no hardware CAM in any Anysee device sold. + * In my understanding it should be implemented by making own module + * for ISO 7816 card reader, like dvb_ca_en50221 is implented. This + * module registers serial interface that can be used to comminicate + * with any ISO 7816 smart card. + * + * Any help according to implement serial smart card reader support + * is highly welcome! + */ + +#include "anysee.h" +#include "tda1002x.h" +#include "mt352.h" +#include "mt352_priv.h" +#include "zl10353.h" + +/* debug */ +static int dvb_usb_anysee_debug; +module_param_named(debug, dvb_usb_anysee_debug, int, 0644); +MODULE_PARM_DESC(debug, "set debugging level" DVB_USB_DEBUG_STATUS); +DVB_DEFINE_MOD_OPT_ADAPTER_NR(adapter_nr); + +struct mutex anysee_usb_mutex; + +static int anysee_ctrl_msg(struct dvb_usb_device *d, u8 *sbuf, u8 slen, + u8 *rbuf, u8 rlen) +{ + struct anysee_state *state = d->priv; + int act_len, ret; + u8 buf[64]; + + if (slen > sizeof(buf)) + slen = sizeof(buf); + memcpy(&buf[0], sbuf, slen); + buf[60] = state->seq++; + + if (mutex_lock_interruptible(&anysee_usb_mutex) < 0) + return -EAGAIN; + + /* We need receive one message more after dvb_usb_generic_rw due + to weird transaction flow, which is 1 x send + 2 x receive. */ + ret = dvb_usb_generic_rw(d, buf, sizeof(buf), buf, sizeof(buf), 0); + + if (!ret) { + /* receive 2nd answer */ + ret = usb_bulk_msg(d->udev, usb_rcvbulkpipe(d->udev, + d->props.generic_bulk_ctrl_endpoint), buf, sizeof(buf), + &act_len, 2000); + if (ret) + err("%s: recv bulk message failed: %d", __func__, ret); + else { + deb_xfer("<<< "); + debug_dump(buf, act_len, deb_xfer); + } + } + + /* read request, copy returned data to return buf */ + if (!ret && rbuf && rlen) + memcpy(rbuf, buf, rlen); + + mutex_unlock(&anysee_usb_mutex); + + return ret; +} + +static int anysee_read_reg(struct dvb_usb_device *d, u16 reg, u8 *val) +{ + u8 buf[] = {CMD_REG_READ, reg >> 8, reg & 0xff, 0x01}; + int ret; + ret = anysee_ctrl_msg(d, buf, sizeof(buf), val, 1); + deb_info("%s: reg:%04x val:%02x\n", __func__, reg, *val); + return ret; +} + +static int anysee_write_reg(struct dvb_usb_device *d, u16 reg, u8 val) +{ + u8 buf[] = {CMD_REG_WRITE, reg >> 8, reg & 0xff, 0x01, val}; + deb_info("%s: reg:%04x val:%02x\n", __func__, reg, val); + return anysee_ctrl_msg(d, buf, sizeof(buf), NULL, 0); +} + +static int anysee_get_hw_info(struct dvb_usb_device *d, u8 *id) +{ + u8 buf[] = {CMD_GET_HW_INFO}; + return anysee_ctrl_msg(d, buf, sizeof(buf), id, 3); +} + +static int anysee_streaming_ctrl(struct dvb_usb_adapter *adap, int onoff) +{ + u8 buf[] = {CMD_STREAMING_CTRL, (u8)onoff, 0x00}; + deb_info("%s: onoff:%02x\n", __func__, onoff); + return anysee_ctrl_msg(adap->dev, buf, sizeof(buf), NULL, 0); +} + +static int anysee_led_ctrl(struct dvb_usb_device *d, u8 mode, u8 interval) +{ + u8 buf[] = {CMD_LED_AND_IR_CTRL, 0x01, mode, interval}; + deb_info("%s: state:%02x interval:%02x\n", __func__, mode, interval); + return anysee_ctrl_msg(d, buf, sizeof(buf), NULL, 0); +} + +static int anysee_ir_ctrl(struct dvb_usb_device *d, u8 onoff) +{ + u8 buf[] = {CMD_LED_AND_IR_CTRL, 0x02, onoff}; + deb_info("%s: onoff:%02x\n", __func__, onoff); + return anysee_ctrl_msg(d, buf, sizeof(buf), NULL, 0); +} + +static int anysee_init(struct dvb_usb_device *d) +{ + int ret; + /* LED light */ + ret = anysee_led_ctrl(d, 0x01, 0x03); + if (ret) + return ret; + + /* enable IR */ + ret = anysee_ir_ctrl(d, 1); + if (ret) + return ret; + + return 0; +} + +/* I2C */ +static int anysee_master_xfer(struct i2c_adapter *adap, struct i2c_msg *msg, + int num) +{ + struct dvb_usb_device *d = i2c_get_adapdata(adap); + int ret, inc, i = 0; + + if (mutex_lock_interruptible(&d->i2c_mutex) < 0) + return -EAGAIN; + + while (i < num) { + if (num > i + 1 && (msg[i+1].flags & I2C_M_RD)) { + u8 buf[6]; + buf[0] = CMD_I2C_READ; + buf[1] = msg[i].addr + 1; + buf[2] = msg[i].buf[0]; + buf[3] = 0x00; + buf[4] = 0x00; + buf[5] = 0x01; + ret = anysee_ctrl_msg(d, buf, sizeof(buf), msg[i+1].buf, + msg[i+1].len); + inc = 2; + } else { + u8 buf[4+msg[i].len]; + buf[0] = CMD_I2C_WRITE; + buf[1] = msg[i].addr; + buf[2] = msg[i].len; + buf[3] = 0x01; + memcpy(&buf[4], msg[i].buf, msg[i].len); + ret = anysee_ctrl_msg(d, buf, sizeof(buf), NULL, 0); + inc = 1; + } + if (ret) + return ret; + + i += inc; + } + + mutex_unlock(&d->i2c_mutex); + + return i; +} + +static u32 anysee_i2c_func(struct i2c_adapter *adapter) +{ + return I2C_FUNC_I2C; +} + +static struct i2c_algorithm anysee_i2c_algo = { + .master_xfer = anysee_master_xfer, + .functionality = anysee_i2c_func, +}; + +static int anysee_mt352_demod_init(struct dvb_frontend *fe) +{ + static u8 clock_config [] = { CLOCK_CTL, 0x38, 0x28 }; + static u8 reset [] = { RESET, 0x80 }; + static u8 adc_ctl_1_cfg [] = { ADC_CTL_1, 0x40 }; + static u8 agc_cfg [] = { AGC_TARGET, 0x28, 0x20 }; + static u8 gpp_ctl_cfg [] = { GPP_CTL, 0x33 }; + static u8 capt_range_cfg[] = { CAPT_RANGE, 0x32 }; + + mt352_write(fe, clock_config, sizeof(clock_config)); + udelay(200); + mt352_write(fe, reset, sizeof(reset)); + mt352_write(fe, adc_ctl_1_cfg, sizeof(adc_ctl_1_cfg)); + + mt352_write(fe, agc_cfg, sizeof(agc_cfg)); + mt352_write(fe, gpp_ctl_cfg, sizeof(gpp_ctl_cfg)); + mt352_write(fe, capt_range_cfg, sizeof(capt_range_cfg)); + + return 0; +} + +/* Callbacks for DVB USB */ +static struct tda10023_config anysee_tda10023_config = { + .demod_address = 0x1a, + .invert = 0, + .xtal = 16000000, + .pll_m = 11, + .pll_p = 3, + .pll_n = 1, + .deltaf = 0xfed6, +}; + +static struct mt352_config anysee_mt352_config = { + .demod_address = 0x1e, + .demod_init = anysee_mt352_demod_init, +}; + +static struct zl10353_config anysee_zl10353_config = { + .demod_address = 0x1e, + .parallel_ts = 1, +}; + +static int anysee_frontend_attach(struct dvb_usb_adapter *adap) +{ + int ret; + struct anysee_state *state = adap->dev->priv; + u8 hw_info[3]; + u8 io_d; /* IO port D */ + + /* check which hardware we have + We must do this call two times to get reliable values (hw bug). */ + ret = anysee_get_hw_info(adap->dev, hw_info); + if (ret) + return ret; + ret = anysee_get_hw_info(adap->dev, hw_info); + if (ret) + return ret; + + /* Meaning of these info bytes are guessed. */ + info("firmware version:%d.%d.%d hardware id:%d", + 0, hw_info[1], hw_info[2], hw_info[0]); + + ret = anysee_read_reg(adap->dev, 0xb0, &io_d); /* IO port D */ + if (ret) + return ret; + deb_info("%s: IO port D:%02x\n", __func__, io_d); + + /* Select demod using trial and error method. */ + + /* Try to attach demodulator in following order: + model demod hw firmware + 1. E30 MT352 02 0.2.1 + 2. E30 ZL10353 02 0.2.1 + 3. E30 Plus ZL10353 06 0.1.0 + 4. E30C Plus TDA10023 0a 0.1.0 + E30C Plus TDA10023 0f 0.1.2 (not working) + */ + + /* Zarlink MT352 DVB-T demod inside of Samsung DNOS404ZH102A NIM */ + adap->fe = dvb_attach(mt352_attach, &anysee_mt352_config, + &adap->dev->i2c_adap); + if (adap->fe != NULL) { + state->tuner = DVB_PLL_THOMSON_DTT7579; + return 0; + } + + /* Zarlink ZL10353 DVB-T demod inside of Samsung DNOS404ZH103A NIM */ + adap->fe = dvb_attach(zl10353_attach, &anysee_zl10353_config, + &adap->dev->i2c_adap); + if (adap->fe != NULL) { + state->tuner = DVB_PLL_THOMSON_DTT7579; + return 0; + } + + /* connect demod on IO port D for TDA10023 & ZL10353 */ + ret = anysee_write_reg(adap->dev, 0xb0, 0x25); + if (ret) + return ret; + + /* Zarlink ZL10353 DVB-T demod inside of Samsung DNOS404ZH103A NIM */ + adap->fe = dvb_attach(zl10353_attach, &anysee_zl10353_config, + &adap->dev->i2c_adap); + if (adap->fe != NULL) { + state->tuner = DVB_PLL_THOMSON_DTT7579; + return 0; + } + + /* known not working (E30C Plus v0.1.2) */ + if (hw_info[0] == 0x0f) { + info("this version of Anysee is not supported yet"); + /* return IO port D to init value for safe */ + ret = anysee_write_reg(adap->dev, 0xb0, io_d); + return -ENODEV; + } + + /* Philips TDA10023 DVB-C demod */ + adap->fe = dvb_attach(tda10023_attach, &anysee_tda10023_config, + &adap->dev->i2c_adap, 0x48); + if (adap->fe != NULL) { + state->tuner = DVB_PLL_SAMSUNG_DTOS403IH102A; + return 0; + } + + /* return IO port D to init value for safe */ + ret = anysee_write_reg(adap->dev, 0xb0, io_d); + if (ret) + return ret; + + err("Unkown Anysee version: %02x %02x %02x. "\ + "Please report the <linux-dvb@linuxtv.org>.", + hw_info[0], hw_info[1], hw_info[2]); + + return -ENODEV; +} + +static int anysee_tuner_attach(struct dvb_usb_adapter *adap) +{ + struct anysee_state *state = adap->dev->priv; + deb_info("%s: \n", __func__); + + switch (state->tuner) { + case DVB_PLL_THOMSON_DTT7579: + /* Thomson dtt7579 (not sure) PLL inside of: + Samsung DNOS404ZH102A NIM + Samsung DNOS404ZH103A NIM */ + dvb_attach(dvb_pll_attach, adap->fe, 0x61, + NULL, DVB_PLL_THOMSON_DTT7579); + break; + case DVB_PLL_SAMSUNG_DTOS403IH102A: + /* Unknown PLL inside of Samsung DTOS403IH102A tuner module */ + dvb_attach(dvb_pll_attach, adap->fe, 0xc0, + &adap->dev->i2c_adap, DVB_PLL_SAMSUNG_DTOS403IH102A); + break; + } + + return 0; +} + +static int anysee_rc_query(struct dvb_usb_device *d, u32 *event, int *state) +{ + u8 buf[] = {CMD_GET_IR_CODE}; + struct dvb_usb_rc_key *keymap = d->props.rc_key_map; + u8 ircode[2]; + int i, ret; + + ret = anysee_ctrl_msg(d, buf, sizeof(buf), &ircode[0], 2); + if (ret) + return ret; + + *event = 0; + *state = REMOTE_NO_KEY_PRESSED; + + for (i = 0; i < d->props.rc_key_map_size; i++) { + if (keymap[i].custom == ircode[0] && + keymap[i].data == ircode[1]) { + *event = keymap[i].event; + *state = REMOTE_KEY_PRESSED; + return 0; + } + } + return 0; +} + +static struct dvb_usb_rc_key anysee_rc_keys[] = { + { 0x01, 0x00, KEY_0 }, + { 0x01, 0x01, KEY_1 }, + { 0x01, 0x02, KEY_2 }, + { 0x01, 0x03, KEY_3 }, + { 0x01, 0x04, KEY_4 }, + { 0x01, 0x05, KEY_5 }, + { 0x01, 0x06, KEY_6 }, + { 0x01, 0x07, KEY_7 }, + { 0x01, 0x08, KEY_8 }, + { 0x01, 0x09, KEY_9 }, + { 0x01, 0x0a, KEY_POWER }, + { 0x01, 0x0b, KEY_DOCUMENTS }, /* * */ + { 0x01, 0x19, KEY_FAVORITES }, + { 0x01, 0x20, KEY_SLEEP }, + { 0x01, 0x21, KEY_MODE }, /* 4:3 / 16:9 select */ + { 0x01, 0x22, KEY_ZOOM }, + { 0x01, 0x47, KEY_TEXT }, + { 0x01, 0x16, KEY_TV }, /* TV / radio select */ + { 0x01, 0x1e, KEY_LANGUAGE }, /* Second Audio Program */ + { 0x01, 0x1a, KEY_SUBTITLE }, + { 0x01, 0x1b, KEY_CAMERA }, /* screenshot */ + { 0x01, 0x42, KEY_MUTE }, + { 0x01, 0x0e, KEY_MENU }, + { 0x01, 0x0f, KEY_EPG }, + { 0x01, 0x17, KEY_INFO }, + { 0x01, 0x10, KEY_EXIT }, + { 0x01, 0x13, KEY_VOLUMEUP }, + { 0x01, 0x12, KEY_VOLUMEDOWN }, + { 0x01, 0x11, KEY_CHANNELUP }, + { 0x01, 0x14, KEY_CHANNELDOWN }, + { 0x01, 0x15, KEY_OK }, + { 0x01, 0x1d, KEY_RED }, + { 0x01, 0x1f, KEY_GREEN }, + { 0x01, 0x1c, KEY_YELLOW }, + { 0x01, 0x44, KEY_BLUE }, + { 0x01, 0x0c, KEY_SHUFFLE }, /* snapshot */ + { 0x01, 0x48, KEY_STOP }, + { 0x01, 0x50, KEY_PLAY }, + { 0x01, 0x51, KEY_PAUSE }, + { 0x01, 0x49, KEY_RECORD }, + { 0x01, 0x18, KEY_PREVIOUS }, /* |<< */ + { 0x01, 0x0d, KEY_NEXT }, /* >>| */ + { 0x01, 0x24, KEY_PROG1 }, /* F1 */ + { 0x01, 0x25, KEY_PROG2 }, /* F2 */ +}; + +/* DVB USB Driver stuff */ +static struct dvb_usb_device_properties anysee_properties; + +static int anysee_probe(struct usb_interface *intf, + const struct usb_device_id *id) +{ + struct dvb_usb_device *d; + struct usb_host_interface *alt; + int ret; + + mutex_init(&anysee_usb_mutex); + + /* There is one interface with two alternate settings. + Alternate setting 0 is for bulk transfer. + Alternate setting 1 is for isochronous transfer. + We use bulk transfer (alternate setting 0). */ + if (intf->num_altsetting < 1) + return -ENODEV; + + ret = dvb_usb_device_init(intf, &anysee_properties, THIS_MODULE, &d, + adapter_nr); + if (ret) + return ret; + + alt = usb_altnum_to_altsetting(intf, 0); + if (alt == NULL) { + deb_info("%s: no alt found!\n", __func__); + return -ENODEV; + } + + ret = usb_set_interface(d->udev, alt->desc.bInterfaceNumber, + alt->desc.bAlternateSetting); + if (ret) + return ret; + + if (d) + ret = anysee_init(d); + + return ret; +} + +static struct usb_device_id anysee_table [] = { + { USB_DEVICE(USB_VID_CYPRESS, USB_PID_ANYSEE) }, + { USB_DEVICE(USB_VID_AMT, USB_PID_ANYSEE) }, + { } /* Terminating entry */ +}; +MODULE_DEVICE_TABLE(usb, anysee_table); + +static struct dvb_usb_device_properties anysee_properties = { + .caps = DVB_USB_IS_AN_I2C_ADAPTER, + + .usb_ctrl = DEVICE_SPECIFIC, + + .size_of_priv = sizeof(struct anysee_state), + + .num_adapters = 1, + .adapter = { + { + .streaming_ctrl = anysee_streaming_ctrl, + .frontend_attach = anysee_frontend_attach, + .tuner_attach = anysee_tuner_attach, + .stream = { + .type = USB_BULK, + .count = 8, + .endpoint = 0x82, + .u = { + .bulk = { + .buffersize = 512, + } + } + }, + } + }, + + .rc_key_map = anysee_rc_keys, + .rc_key_map_size = ARRAY_SIZE(anysee_rc_keys), + .rc_query = anysee_rc_query, + .rc_interval = 200, /* windows driver uses 500ms */ + + .i2c_algo = &anysee_i2c_algo, + + .generic_bulk_ctrl_endpoint = 1, + + .num_device_descs = 1, + .devices = { + { + .name = "Anysee DVB USB2.0", + .cold_ids = {NULL}, + .warm_ids = {&anysee_table[0], + &anysee_table[1], NULL}, + }, + } +}; + +static struct usb_driver anysee_driver = { +#if LINUX_VERSION_CODE <= KERNEL_VERSION(2, 6, 15) + .owner = THIS_MODULE, +#endif + .name = "dvb_usb_anysee", + .probe = anysee_probe, + .disconnect = dvb_usb_device_exit, + .id_table = anysee_table, +}; + +/* module stuff */ +static int __init anysee_module_init(void) +{ + int ret; + + ret = usb_register(&anysee_driver); + if (ret) + err("%s: usb_register failed. Error number %d", __func__, ret); + + return ret; +} + +static void __exit anysee_module_exit(void) +{ + /* deregister this driver from the USB subsystem */ + usb_deregister(&anysee_driver); +} + +module_init(anysee_module_init); +module_exit(anysee_module_exit); + +MODULE_AUTHOR("Antti Palosaari <crope@iki.fi>"); +MODULE_DESCRIPTION("Driver Anysee E30 DVB-C & DVB-T USB2.0"); +MODULE_LICENSE("GPL"); diff --git a/linux/drivers/media/dvb/dvb-usb/anysee.h b/linux/drivers/media/dvb/dvb-usb/anysee.h new file mode 100644 index 000000000..48da3949e --- /dev/null +++ b/linux/drivers/media/dvb/dvb-usb/anysee.h @@ -0,0 +1,304 @@ +/* + * DVB USB Linux driver for Anysee E30 DVB-C & DVB-T USB2.0 receiver + * + * Copyright (C) 2007 Antti Palosaari <crope@iki.fi> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. + * + * TODO: + * - add smart card reader support for Conditional Access (CA) + * + * Card reader in Anysee is nothing more than ISO 7816 card reader. + * There is no hardware CAM in any Anysee device sold. + * In my understanding it should be implemented by making own module + * for ISO 7816 card reader, like dvb_ca_en50221 is implented. This + * module registers serial interface that can be used to comminicate + * with any ISO 7816 smart card. + * + * Any help according to implement serial smart card reader support + * is highly welcome! + */ + +#ifndef _DVB_USB_ANYSEE_H_ +#define _DVB_USB_ANYSEE_H_ + +#define DVB_USB_LOG_PREFIX "anysee" +#include "dvb-usb.h" + +#define deb_info(args...) dprintk(dvb_usb_anysee_debug, 0x01, args) +#define deb_xfer(args...) dprintk(dvb_usb_anysee_debug, 0x02, args) +#define deb_rc(args...) dprintk(dvb_usb_anysee_debug, 0x04, args) +#define deb_reg(args...) dprintk(dvb_usb_anysee_debug, 0x08, args) +#define deb_i2c(args...) dprintk(dvb_usb_anysee_debug, 0x10, args) +#define deb_fw(args...) dprintk(dvb_usb_anysee_debug, 0x20, args) + +enum cmd { + CMD_I2C_READ = 0x33, + CMD_I2C_WRITE = 0x31, + CMD_REG_READ = 0xb0, + CMD_REG_WRITE = 0xb1, + CMD_STREAMING_CTRL = 0x12, + CMD_LED_AND_IR_CTRL = 0x16, + CMD_GET_IR_CODE = 0x41, + CMD_GET_HW_INFO = 0x19, + CMD_SMARTCARD = 0x34, +}; + +struct anysee_state { + u8 tuner; + u8 seq; +}; + +#endif + +/*************************************************************************** + * USB API description (reverse engineered) + *************************************************************************** + +Transaction flow: +================= +BULK[00001] >>> REQUEST PACKET 64 bytes +BULK[00081] <<< REPLY PACKET #1 64 bytes (PREVIOUS TRANSACTION REPLY) +BULK[00081] <<< REPLY PACKET #2 64 bytes (CURRENT TRANSACTION REPLY) + +General reply packet(s) are always used if not own reply defined. + +============================================================================ +| 00-63 | GENERAL REPLY PACKET #1 (PREVIOUS REPLY) +============================================================================ +| 00 | reply data (if any) from previous transaction +| | Just same reply packet as returned during previous transaction. +| | Needed only if reply is missed in previous transaction. +| | Just skip normally. +---------------------------------------------------------------------------- +| 01-59 | don't care +---------------------------------------------------------------------------- +| 60 | packet sequence number +---------------------------------------------------------------------------- +| 61-63 | don't care +---------------------------------------------------------------------------- + +============================================================================ +| 00-63 | GENERAL REPLY PACKET #2 (CURRENT REPLY) +============================================================================ +| 00 | reply data (if any) +---------------------------------------------------------------------------- +| 01-59 | don't care +---------------------------------------------------------------------------- +| 60 | packet sequence number +---------------------------------------------------------------------------- +| 61-63 | don't care +---------------------------------------------------------------------------- + +============================================================================ +| 00-63 | I2C WRITE REQUEST PACKET +============================================================================ +| 00 | 0x31 I2C write command +---------------------------------------------------------------------------- +| 01 | i2c address +---------------------------------------------------------------------------- +| 02 | data length +| | 0x02 (for typical I2C reg / val pair) +---------------------------------------------------------------------------- +| 03 | 0x01 +---------------------------------------------------------------------------- +| 04- | data +---------------------------------------------------------------------------- +| -59 | don't care +---------------------------------------------------------------------------- +| 60 | packet sequence number +---------------------------------------------------------------------------- +| 61-63 | don't care +---------------------------------------------------------------------------- + +============================================================================ +| 00-63 | I2C READ REQUEST PACKET +============================================================================ +| 00 | 0x33 I2C read command +---------------------------------------------------------------------------- +| 01 | i2c address + 1 +---------------------------------------------------------------------------- +| 02 | register +---------------------------------------------------------------------------- +| 03 | 0x00 +---------------------------------------------------------------------------- +| 04 | 0x00 +---------------------------------------------------------------------------- +| 05 | 0x01 +---------------------------------------------------------------------------- +| 06-59 | don't care +---------------------------------------------------------------------------- +| 60 | packet sequence number +---------------------------------------------------------------------------- +| 61-63 | don't care +---------------------------------------------------------------------------- + +============================================================================ +| 00-63 | USB CONTROLLER REGISTER WRITE REQUEST PACKET +============================================================================ +| 00 | 0xb1 register write command +---------------------------------------------------------------------------- +| 01-02 | register +---------------------------------------------------------------------------- +| 03 | 0x01 +---------------------------------------------------------------------------- +| 04 | value +---------------------------------------------------------------------------- +| 05-59 | don't care +---------------------------------------------------------------------------- +| 60 | packet sequence number +---------------------------------------------------------------------------- +| 61-63 | don't care +---------------------------------------------------------------------------- + +============================================================================ +| 00-63 | USB CONTROLLER REGISTER READ REQUEST PACKET +============================================================================ +| 00 | 0xb0 register read command +---------------------------------------------------------------------------- +| 01-02 | register +---------------------------------------------------------------------------- +| 03 | 0x01 +---------------------------------------------------------------------------- +| 04-59 | don't care +---------------------------------------------------------------------------- +| 60 | packet sequence number +---------------------------------------------------------------------------- +| 61-63 | don't care +---------------------------------------------------------------------------- + +============================================================================ +| 00-63 | LED CONTROL REQUEST PACKET +============================================================================ +| 00 | 0x16 LED and IR control command +---------------------------------------------------------------------------- +| 01 | 0x01 (LED) +---------------------------------------------------------------------------- +| 03 | 0x00 blink +| | 0x01 lights continuously +---------------------------------------------------------------------------- +| 04 | blink interval +| | 0x00 fastest (looks like LED lights continuously) +| | 0xff slowest +---------------------------------------------------------------------------- +| 05-59 | don't care +---------------------------------------------------------------------------- +| 60 | packet sequence number +---------------------------------------------------------------------------- +| 61-63 | don't care +---------------------------------------------------------------------------- + +============================================================================ +| 00-63 | IR CONTROL REQUEST PACKET +============================================================================ +| 00 | 0x16 LED and IR control command +---------------------------------------------------------------------------- +| 01 | 0x02 (IR) +---------------------------------------------------------------------------- +| 03 | 0x00 IR disabled +| | 0x01 IR enabled +---------------------------------------------------------------------------- +| 04-59 | don't care +---------------------------------------------------------------------------- +| 60 | packet sequence number +---------------------------------------------------------------------------- +| 61-63 | don't care +---------------------------------------------------------------------------- + +============================================================================ +| 00-63 | STREAMING CONTROL REQUEST PACKET +============================================================================ +| 00 | 0x12 streaming control command +---------------------------------------------------------------------------- +| 01 | 0x00 streaming disabled +| | 0x01 streaming enabled +---------------------------------------------------------------------------- +| 02 | 0x00 +---------------------------------------------------------------------------- +| 03-59 | don't care +---------------------------------------------------------------------------- +| 60 | packet sequence number +---------------------------------------------------------------------------- +| 61-63 | don't care +---------------------------------------------------------------------------- + +============================================================================ +| 00-63 | REMOTE CONTROL REQUEST PACKET +============================================================================ +| 00 | 0x41 remote control command +---------------------------------------------------------------------------- +| 01-59 | don't care +---------------------------------------------------------------------------- +| 60 | packet sequence number +---------------------------------------------------------------------------- +| 61-63 | don't care +---------------------------------------------------------------------------- + +============================================================================ +| 00-63 | REMOTE CONTROL REPLY PACKET +============================================================================ +| 00 | 0x00 code not received +| | 0x01 code received +---------------------------------------------------------------------------- +| 01 | remote control code +---------------------------------------------------------------------------- +| 02-59 | don't care +---------------------------------------------------------------------------- +| 60 | packet sequence number +---------------------------------------------------------------------------- +| 61-63 | don't care +---------------------------------------------------------------------------- + +============================================================================ +| 00-63 | GET HARDWARE INFO REQUEST PACKET +============================================================================ +| 00 | 0x19 get hardware info command +---------------------------------------------------------------------------- +| 01-59 | don't care +---------------------------------------------------------------------------- +| 60 | packet sequence number +---------------------------------------------------------------------------- +| 61-63 | don't care +---------------------------------------------------------------------------- + +============================================================================ +| 00-63 | GET HARDWARE INFO REPLY PACKET +============================================================================ +| 00 | hardware id +---------------------------------------------------------------------------- +| 01-02 | firmware version +---------------------------------------------------------------------------- +| 03-59 | don't care +---------------------------------------------------------------------------- +| 60 | packet sequence number +---------------------------------------------------------------------------- +| 61-63 | don't care +---------------------------------------------------------------------------- + +============================================================================ +| 00-63 | SMART CARD READER PACKET +============================================================================ +| 00 | 0x34 smart card reader command +---------------------------------------------------------------------------- +| xx | +---------------------------------------------------------------------------- +| xx-59 | don't care +---------------------------------------------------------------------------- +| 60 | packet sequence number +---------------------------------------------------------------------------- +| 61-63 | don't care +---------------------------------------------------------------------------- + +*/ diff --git a/linux/drivers/media/dvb/dvb-usb/au6610.c b/linux/drivers/media/dvb/dvb-usb/au6610.c index 4800a5004..fc3375c60 100644 --- a/linux/drivers/media/dvb/dvb-usb/au6610.c +++ b/linux/drivers/media/dvb/dvb-usb/au6610.c @@ -1,23 +1,32 @@ -/* DVB USB compliant linux driver for Sigmatek DVB-110 DVB-T USB2.0 receiver +/* + * DVB USB Linux driver for Alcor Micro AU6610 DVB-T USB2.0. * * Copyright (C) 2006 Antti Palosaari <crope@iki.fi> * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License as published by the Free - * Software Foundation, version 2. + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. * - * see Documentation/dvb/README.dvb-usb for more information + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. */ #include "au6610.h" - #include "zl10353.h" #include "qt1010.h" /* debug */ static int dvb_usb_au6610_debug; module_param_named(debug, dvb_usb_au6610_debug, int, 0644); -MODULE_PARM_DESC(debug, "set debugging level (1=rc (or-able))." DVB_USB_DEBUG_STATUS); +MODULE_PARM_DESC(debug, "set debugging level" DVB_USB_DEBUG_STATUS); +DVB_DEFINE_MOD_OPT_ADAPTER_NR(adapter_nr); static int au6610_usb_msg(struct dvb_usb_device *d, u8 operation, u8 addr, u8 *wbuf, u16 wlen, u8 *rbuf, u16 rlen) @@ -40,9 +49,8 @@ static int au6610_usb_msg(struct dvb_usb_device *d, u8 operation, u8 addr, } ret = usb_control_msg(d->udev, usb_rcvctrlpipe(d->udev, 0), operation, - USB_TYPE_VENDOR|USB_DIR_IN, addr << 1, index, usb_buf, - sizeof(usb_buf), AU6610_USB_TIMEOUT); - + USB_TYPE_VENDOR|USB_DIR_IN, addr << 1, index, + usb_buf, sizeof(usb_buf), AU6610_USB_TIMEOUT); if (ret < 0) return ret; @@ -114,15 +122,6 @@ static struct i2c_algorithm au6610_i2c_algo = { }; /* Callbacks for DVB USB */ -static int au6610_identify_state(struct usb_device *udev, - struct dvb_usb_device_properties *props, - struct dvb_usb_device_description **desc, - int *cold) -{ - *cold = 0; - return 0; -} - static struct zl10353_config au6610_zl10353_config = { .demod_address = 0x0f, .no_tuner = 1, @@ -131,12 +130,12 @@ static struct zl10353_config au6610_zl10353_config = { static int au6610_zl10353_frontend_attach(struct dvb_usb_adapter *adap) { - if ((adap->fe = dvb_attach(zl10353_attach, &au6610_zl10353_config, - &adap->dev->i2c_adap)) != NULL) { - return 0; - } + adap->fe = dvb_attach(zl10353_attach, &au6610_zl10353_config, + &adap->dev->i2c_adap); + if (adap->fe == NULL) + return -ENODEV; - return -EIO; + return 0; } static struct qt1010_config au6610_qt1010_config = { @@ -163,11 +162,13 @@ static int au6610_probe(struct usb_interface *intf, if (intf->num_altsetting < AU6610_ALTSETTING_COUNT) return -ENODEV; - if ((ret = dvb_usb_device_init(intf, &au6610_properties, THIS_MODULE, &d)) == 0) { + ret = dvb_usb_device_init(intf, &au6610_properties, THIS_MODULE, &d, + adapter_nr); + if (ret == 0) { alt = usb_altnum_to_altsetting(intf, AU6610_ALTSETTING); if (alt == NULL) { - deb_rc("no alt found!\n"); + deb_info("%s: no alt found!\n", __func__); return -ENODEV; } ret = usb_set_interface(d->udev, alt->desc.bInterfaceNumber, @@ -177,18 +178,19 @@ static int au6610_probe(struct usb_interface *intf, return ret; } - static struct usb_device_id au6610_table [] = { { USB_DEVICE(USB_VID_ALCOR_MICRO, USB_PID_SIGMATEK_DVB_110) }, { } /* Terminating entry */ }; -MODULE_DEVICE_TABLE (usb, au6610_table); +MODULE_DEVICE_TABLE(usb, au6610_table); static struct dvb_usb_device_properties au6610_properties = { .caps = DVB_USB_IS_AN_I2C_ADAPTER, + .usb_ctrl = DEVICE_SPECIFIC, - .size_of_priv = 0, - .identify_state = au6610_identify_state, + + .size_of_priv = 0, + .num_adapters = 1, .adapter = { { @@ -202,26 +204,28 @@ static struct dvb_usb_device_properties au6610_properties = { .u = { .isoc = { .framesperurb = 40, - .framesize = 942, /* maximum packet size */ - .interval = 1.25, /* 125 us */ + .framesize = 942, + .interval = 1, } } }, } }, + .i2c_algo = &au6610_i2c_algo, + .num_device_descs = 1, .devices = { { - "Sigmatek DVB-110 DVB-T USB2.0", - { &au6610_table[0], NULL }, - { NULL }, + .name = "Sigmatek DVB-110 DVB-T USB2.0", + .cold_ids = {NULL}, + .warm_ids = {&au6610_table[0], NULL}, }, } }; static struct usb_driver au6610_driver = { -#if LINUX_VERSION_CODE <= KERNEL_VERSION(2,6,15) +#if LINUX_VERSION_CODE <= KERNEL_VERSION(2, 6, 15) .owner = THIS_MODULE, #endif .name = "dvb_usb_au6610", @@ -235,12 +239,11 @@ static int __init au6610_module_init(void) { int ret; - if ((ret = usb_register(&au6610_driver))) { + ret = usb_register(&au6610_driver); + if (ret) err("usb_register failed. Error number %d", ret); - return ret; - } - return 0; + return ret; } static void __exit au6610_module_exit(void) @@ -249,10 +252,10 @@ static void __exit au6610_module_exit(void) usb_deregister(&au6610_driver); } -module_init (au6610_module_init); -module_exit (au6610_module_exit); +module_init(au6610_module_init); +module_exit(au6610_module_exit); MODULE_AUTHOR("Antti Palosaari <crope@iki.fi>"); -MODULE_DESCRIPTION("Driver Sigmatek DVB-110 DVB-T USB2.0 / AU6610"); +MODULE_DESCRIPTION("Driver for Alcor Micro AU6610 DVB-T USB2.0"); MODULE_VERSION("0.1"); MODULE_LICENSE("GPL"); diff --git a/linux/drivers/media/dvb/dvb-usb/au6610.h b/linux/drivers/media/dvb/dvb-usb/au6610.h index 4161b054c..7849abe2c 100644 --- a/linux/drivers/media/dvb/dvb-usb/au6610.h +++ b/linux/drivers/media/dvb/dvb-usb/au6610.h @@ -1,10 +1,30 @@ +/* + * DVB USB Linux driver for Alcor Micro AU6610 DVB-T USB2.0. + * + * Copyright (C) 2006 Antti Palosaari <crope@iki.fi> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. + */ + #ifndef _DVB_USB_AU6610_H_ #define _DVB_USB_AU6610_H_ #define DVB_USB_LOG_PREFIX "au6610" #include "dvb-usb.h" -#define deb_rc(args...) dprintk(dvb_usb_au6610_debug,0x01,args) +#define deb_info(args...) dprintk(dvb_usb_au6610_debug, 0x01, args) #define AU6610_REQ_I2C_WRITE 0x14 #define AU6610_REQ_I2C_READ 0x13 diff --git a/linux/drivers/media/dvb/dvb-usb/cxusb.c b/linux/drivers/media/dvb/dvb-usb/cxusb.c index 84d8a915d..ddfa0cff7 100644 --- a/linux/drivers/media/dvb/dvb-usb/cxusb.c +++ b/linux/drivers/media/dvb/dvb-usb/cxusb.c @@ -33,13 +33,15 @@ #include "mt352_priv.h" #include "zl10353.h" #include "tuner-xc2028.h" -#include "tuner-xc2028-types.h" #include "tuner-simple.h" /* debug */ static int dvb_usb_cxusb_debug; module_param_named(debug, dvb_usb_cxusb_debug, int, 0644); MODULE_PARM_DESC(debug, "set debugging level (1=rc (or-able))." DVB_USB_DEBUG_STATUS); + +DVB_DEFINE_MOD_OPT_ADAPTER_NR(adapter_nr); + #define deb_info(args...) dprintk(dvb_usb_cxusb_debug,0x01,args) #define deb_i2c(args...) if (d->udev->descriptor.idVendor == USB_VID_MEDION) \ dprintk(dvb_usb_cxusb_debug,0x01,args) @@ -492,14 +494,14 @@ static int dvico_bluebird_xc2028_callback(void *ptr, int command, int arg) switch (command) { case XC2028_TUNER_RESET: - deb_info("%s: XC2028_TUNER_RESET %d\n", __FUNCTION__, arg); + deb_info("%s: XC2028_TUNER_RESET %d\n", __func__, arg); cxusb_bluebird_gpio_pulse(d, 0x01, 1); break; case XC2028_RESET_CLK: - deb_info("%s: XC2028_RESET_CLK %d\n", __FUNCTION__, arg); + deb_info("%s: XC2028_RESET_CLK %d\n", __func__, arg); break; default: - deb_info("%s: unknown command %d, arg %d\n", __FUNCTION__, + deb_info("%s: unknown command %d, arg %d\n", __func__, command, arg); return -EINVAL; } @@ -518,7 +520,7 @@ static int cxusb_dvico_xc3028_tuner_attach(struct dvb_usb_adapter *adap) static struct xc2028_ctrl ctl = { .fname = "xc3028-dvico-au-01.fw", .max_len = 64, - .scode_table = ZARLINK456, + .scode_table = XC3028_FE_ZARLINK456, }; fe = dvb_attach(xc2028_attach, adap->fe, &cfg); @@ -723,16 +725,24 @@ static struct dvb_usb_device_properties cxusb_bluebird_nano2_needsfirmware_prope static int cxusb_probe(struct usb_interface *intf, const struct usb_device_id *id) { - if (dvb_usb_device_init(intf,&cxusb_medion_properties,THIS_MODULE,NULL) == 0 || - dvb_usb_device_init(intf,&cxusb_bluebird_lgh064f_properties,THIS_MODULE,NULL) == 0 || - dvb_usb_device_init(intf,&cxusb_bluebird_dee1601_properties,THIS_MODULE,NULL) == 0 || - dvb_usb_device_init(intf,&cxusb_bluebird_lgz201_properties,THIS_MODULE,NULL) == 0 || - dvb_usb_device_init(intf,&cxusb_bluebird_dtt7579_properties,THIS_MODULE,NULL) == 0 || - dvb_usb_device_init(intf,&cxusb_bluebird_dualdig4_properties,THIS_MODULE,NULL) == 0 || - dvb_usb_device_init(intf,&cxusb_bluebird_nano2_properties,THIS_MODULE,NULL) == 0 || - dvb_usb_device_init(intf,&cxusb_bluebird_nano2_needsfirmware_properties,THIS_MODULE,NULL) == 0) { + if (0 == dvb_usb_device_init(intf, &cxusb_medion_properties, + THIS_MODULE, NULL, adapter_nr) || + 0 == dvb_usb_device_init(intf, &cxusb_bluebird_lgh064f_properties, + THIS_MODULE, NULL, adapter_nr) || + 0 == dvb_usb_device_init(intf, &cxusb_bluebird_dee1601_properties, + THIS_MODULE, NULL, adapter_nr) || + 0 == dvb_usb_device_init(intf, &cxusb_bluebird_lgz201_properties, + THIS_MODULE, NULL, adapter_nr) || + 0 == dvb_usb_device_init(intf, &cxusb_bluebird_dtt7579_properties, + THIS_MODULE, NULL, adapter_nr) || + 0 == dvb_usb_device_init(intf, &cxusb_bluebird_dualdig4_properties, + THIS_MODULE, NULL, adapter_nr) || + 0 == dvb_usb_device_init(intf, &cxusb_bluebird_nano2_properties, + THIS_MODULE, NULL, adapter_nr) || + 0 == dvb_usb_device_init(intf, + &cxusb_bluebird_nano2_needsfirmware_properties, + THIS_MODULE, NULL, adapter_nr)) return 0; - } return -EINVAL; } diff --git a/linux/drivers/media/dvb/dvb-usb/dib0700_core.c b/linux/drivers/media/dvb/dvb-usb/dib0700_core.c index 9d3217983..a2162fda5 100644 --- a/linux/drivers/media/dvb/dvb-usb/dib0700_core.c +++ b/linux/drivers/media/dvb/dvb-usb/dib0700_core.c @@ -17,6 +17,8 @@ int dvb_usb_dib0700_ir_proto = 1; module_param(dvb_usb_dib0700_ir_proto, int, 0644); MODULE_PARM_DESC(dvb_usb_dib0700_ir_proto, "set ir protocol (0=NEC, 1=RC5 (default), 2=RC6)."); +DVB_DEFINE_MOD_OPT_ADAPTER_NR(adapter_nr); + /* expecting rx buffer: request data[0] data[1] ... data[2] */ static int dib0700_ctrl_wr(struct dvb_usb_device *d, u8 *tx, u8 txlen) { @@ -289,7 +291,8 @@ static int dib0700_probe(struct usb_interface *intf, #endif for (i = 0; i < dib0700_device_count; i++) - if (dvb_usb_device_init(intf, &dib0700_devices[i], THIS_MODULE, &dev) == 0) + if (dvb_usb_device_init(intf, &dib0700_devices[i], THIS_MODULE, + &dev, adapter_nr) == 0) { dib0700_rc_setup(dev); return 0; diff --git a/linux/drivers/media/dvb/dvb-usb/dib0700_devices.c b/linux/drivers/media/dvb/dvb-usb/dib0700_devices.c index 6477fc66c..c4d40fe01 100644 --- a/linux/drivers/media/dvb/dvb-usb/dib0700_devices.c +++ b/linux/drivers/media/dvb/dvb-usb/dib0700_devices.c @@ -111,8 +111,8 @@ static int bristol_tuner_attach(struct dvb_usb_adapter *adap) struct i2c_adapter *tun_i2c = dib3000mc_get_tuner_i2c_master(adap->fe, 1); s8 a; int if1=1220; - if (adap->dev->udev->descriptor.idVendor == USB_VID_HAUPPAUGE && - adap->dev->udev->descriptor.idProduct == USB_PID_HAUPPAUGE_NOVA_T_500_2) { + if (adap->dev->udev->descriptor.idVendor == cpu_to_le16(USB_VID_HAUPPAUGE) && + adap->dev->udev->descriptor.idProduct == cpu_to_le16(USB_PID_HAUPPAUGE_NOVA_T_500_2)) { if (!eeprom_read(prim_i2c,0x59 + adap->id,&a)) if1=1220+a; } return dvb_attach(mt2060_attach,adap->fe, tun_i2c,&bristol_mt2060_config[adap->id], @@ -299,7 +299,7 @@ static int stk7700d_tuner_attach(struct dvb_usb_adapter *adap) } /* STK7700-PH: Digital/Analog Hybrid Tuner, e.h. Cinergy HT USB HE */ -struct dibx000_agc_config xc3028_agc_config = { +static struct dibx000_agc_config xc3028_agc_config = { BAND_VHF | BAND_UHF, /* band_caps */ /* P_agc_use_sd_mod1=0, P_agc_use_sd_mod2=0, P_agc_freq_pwm_div=0, @@ -342,7 +342,7 @@ struct dibx000_agc_config xc3028_agc_config = { }; /* PLL Configuration for COFDM BW_MHz = 8.00 with external clock = 30.00 */ -struct dibx000_bandwidth_config xc3028_bw_config = { +static struct dibx000_bandwidth_config xc3028_bw_config = { 60000, 30000, /* internal, sampling */ 1, 8, 3, 1, 0, /* pll_cfg: prediv, ratio, range, reset, bypass */ 0, 0, 1, 1, 0, /* misc: refdiv, bypclk_div, IO_CLK_en_core, ADClkSrc, @@ -402,8 +402,8 @@ static int stk7700ph_frontend_attach(struct dvb_usb_adapter *adap) { struct usb_device_descriptor *desc = &adap->dev->udev->descriptor; - if (desc->idVendor == USB_VID_PINNACLE && - desc->idProduct == USB_PID_PINNACLE_EXPRESSCARD_320CX) + if (desc->idVendor == cpu_to_le16(USB_VID_PINNACLE) && + desc->idProduct == cpu_to_le16(USB_PID_PINNACLE_EXPRESSCARD_320CX)) dib0700_set_gpio(adap->dev, GPIO6, GPIO_OUT, 0); else dib0700_set_gpio(adap->dev, GPIO6, GPIO_OUT, 1); @@ -845,8 +845,8 @@ static int stk7700p_tuner_attach(struct dvb_usb_adapter *adap) struct i2c_adapter *tun_i2c; s8 a; int if1=1220; - if (adap->dev->udev->descriptor.idVendor == USB_VID_HAUPPAUGE && - adap->dev->udev->descriptor.idProduct == USB_PID_HAUPPAUGE_NOVA_T_STICK) { + if (adap->dev->udev->descriptor.idVendor == cpu_to_le16(USB_VID_HAUPPAUGE) && + adap->dev->udev->descriptor.idProduct == cpu_to_le16(USB_PID_HAUPPAUGE_NOVA_T_STICK)) { if (!eeprom_read(prim_i2c,0x58,&a)) if1=1220+a; } if (st->is_dib7000pc) @@ -990,11 +990,12 @@ static struct dib7000p_config dib7070p_dib7000p_config = { /* STK7070P */ static int stk7070p_frontend_attach(struct dvb_usb_adapter *adap) { - if (adap->dev->udev->descriptor.idVendor == USB_VID_PINNACLE && - adap->dev->udev->descriptor.idProduct == USB_PID_PINNACLE_PCTV72E) - dib0700_set_gpio(adap->dev, GPIO6, GPIO_OUT, 0); + struct usb_device_descriptor *p = &adap->dev->udev->descriptor; + if (p->idVendor == cpu_to_le16(USB_VID_PINNACLE) && + p->idProduct == cpu_to_le16(USB_PID_PINNACLE_PCTV72E)) + dib0700_set_gpio(adap->dev, GPIO6, GPIO_OUT, 0); else - dib0700_set_gpio(adap->dev, GPIO6, GPIO_OUT, 1); + dib0700_set_gpio(adap->dev, GPIO6, GPIO_OUT, 1); msleep(10); dib0700_set_gpio(adap->dev, GPIO9, GPIO_OUT, 1); dib0700_set_gpio(adap->dev, GPIO4, GPIO_OUT, 1); diff --git a/linux/drivers/media/dvb/dvb-usb/dibusb-mb.c b/linux/drivers/media/dvb/dvb-usb/dibusb-mb.c index 0d0edece8..2ac86685d 100644 --- a/linux/drivers/media/dvb/dvb-usb/dibusb-mb.c +++ b/linux/drivers/media/dvb/dvb-usb/dibusb-mb.c @@ -14,6 +14,8 @@ */ #include "dibusb.h" +DVB_DEFINE_MOD_OPT_ADAPTER_NR(adapter_nr); + static int dib3000mb_i2c_gate_ctrl(struct dvb_frontend* fe, int enable) { struct dvb_usb_adapter *adap = fe->dvb->priv; @@ -107,10 +109,14 @@ static struct dvb_usb_device_properties artec_t1_usb2_properties; static int dibusb_probe(struct usb_interface *intf, const struct usb_device_id *id) { - if (dvb_usb_device_init(intf,&dibusb1_1_properties,THIS_MODULE,NULL) == 0 || - dvb_usb_device_init(intf,&dibusb1_1_an2235_properties,THIS_MODULE,NULL) == 0 || - dvb_usb_device_init(intf,&dibusb2_0b_properties,THIS_MODULE,NULL) == 0 || - dvb_usb_device_init(intf,&artec_t1_usb2_properties,THIS_MODULE,NULL) == 0) + if (0 == dvb_usb_device_init(intf, &dibusb1_1_properties, + THIS_MODULE, NULL, adapter_nr) || + 0 == dvb_usb_device_init(intf, &dibusb1_1_an2235_properties, + THIS_MODULE, NULL, adapter_nr) || + 0 == dvb_usb_device_init(intf, &dibusb2_0b_properties, + THIS_MODULE, NULL, adapter_nr) || + 0 == dvb_usb_device_init(intf, &artec_t1_usb2_properties, + THIS_MODULE, NULL, adapter_nr)) return 0; return -EINVAL; diff --git a/linux/drivers/media/dvb/dvb-usb/dibusb-mc.c b/linux/drivers/media/dvb/dvb-usb/dibusb-mc.c index 8fa2b6908..b1658ac6b 100644 --- a/linux/drivers/media/dvb/dvb-usb/dibusb-mc.c +++ b/linux/drivers/media/dvb/dvb-usb/dibusb-mc.c @@ -14,13 +14,16 @@ */ #include "dibusb.h" +DVB_DEFINE_MOD_OPT_ADAPTER_NR(adapter_nr); + /* USB Driver stuff */ static struct dvb_usb_device_properties dibusb_mc_properties; static int dibusb_mc_probe(struct usb_interface *intf, const struct usb_device_id *id) { - return dvb_usb_device_init(intf,&dibusb_mc_properties,THIS_MODULE,NULL); + return dvb_usb_device_init(intf, &dibusb_mc_properties, THIS_MODULE, + NULL, adapter_nr); } /* do not change the order of the ID table */ diff --git a/linux/drivers/media/dvb/dvb-usb/digitv.c b/linux/drivers/media/dvb/dvb-usb/digitv.c index 382ffaa1e..1394b3e6b 100644 --- a/linux/drivers/media/dvb/dvb-usb/digitv.c +++ b/linux/drivers/media/dvb/dvb-usb/digitv.c @@ -20,6 +20,9 @@ static int dvb_usb_digitv_debug; module_param_named(debug,dvb_usb_digitv_debug, int, 0644); MODULE_PARM_DESC(debug, "set debugging level (1=rc (or-able))." DVB_USB_DEBUG_STATUS); + +DVB_DEFINE_MOD_OPT_ADAPTER_NR(adapter_nr); + #define deb_rc(args...) dprintk(dvb_usb_digitv_debug,0x01,args) static int digitv_ctrl_msg(struct dvb_usb_device *d, @@ -256,8 +259,9 @@ static int digitv_probe(struct usb_interface *intf, const struct usb_device_id *id) { struct dvb_usb_device *d; - int ret; - if ((ret = dvb_usb_device_init(intf,&digitv_properties,THIS_MODULE,&d)) == 0) { + int ret = dvb_usb_device_init(intf, &digitv_properties, THIS_MODULE, &d, + adapter_nr); + if (ret == 0) { u8 b[4] = { 0 }; if (d != NULL) { /* do that only when the firmware is loaded */ diff --git a/linux/drivers/media/dvb/dvb-usb/dtt200u.c b/linux/drivers/media/dvb/dvb-usb/dtt200u.c index 24ccd5a4d..5fcae7925 100644 --- a/linux/drivers/media/dvb/dvb-usb/dtt200u.c +++ b/linux/drivers/media/dvb/dvb-usb/dtt200u.c @@ -18,6 +18,8 @@ int dvb_usb_dtt200u_debug; module_param_named(debug,dvb_usb_dtt200u_debug, int, 0644); MODULE_PARM_DESC(debug, "set debugging level (1=info,xfer=2 (or-able))." DVB_USB_DEBUG_STATUS); +DVB_DEFINE_MOD_OPT_ADAPTER_NR(adapter_nr); + static int dtt200u_power_ctrl(struct dvb_usb_device *d, int onoff) { u8 b = SET_INIT; @@ -101,11 +103,16 @@ static struct dvb_usb_device_properties wt220u_miglia_properties; static int dtt200u_usb_probe(struct usb_interface *intf, const struct usb_device_id *id) { - if (dvb_usb_device_init(intf,&dtt200u_properties,THIS_MODULE,NULL) == 0 || - dvb_usb_device_init(intf,&wt220u_properties,THIS_MODULE,NULL) == 0 || - dvb_usb_device_init(intf,&wt220u_fc_properties,THIS_MODULE,NULL) == 0 || - dvb_usb_device_init(intf,&wt220u_zl0353_properties,THIS_MODULE,NULL) == 0 || - dvb_usb_device_init(intf,&wt220u_miglia_properties,THIS_MODULE,NULL) == 0) + if (0 == dvb_usb_device_init(intf, &dtt200u_properties, + THIS_MODULE, NULL, adapter_nr) || + 0 == dvb_usb_device_init(intf, &wt220u_properties, + THIS_MODULE, NULL, adapter_nr) || + 0 == dvb_usb_device_init(intf, &wt220u_fc_properties, + THIS_MODULE, NULL, adapter_nr) || + 0 == dvb_usb_device_init(intf, &wt220u_zl0353_properties, + THIS_MODULE, NULL, adapter_nr) || + 0 == dvb_usb_device_init(intf, &wt220u_miglia_properties, + THIS_MODULE, NULL, adapter_nr)) return 0; return -ENODEV; diff --git a/linux/drivers/media/dvb/dvb-usb/dvb-usb-common.h b/linux/drivers/media/dvb/dvb-usb/dvb-usb-common.h index 35ab68f6d..6b7b2a892 100644 --- a/linux/drivers/media/dvb/dvb-usb/dvb-usb-common.h +++ b/linux/drivers/media/dvb/dvb-usb/dvb-usb-common.h @@ -40,7 +40,8 @@ extern int dvb_usb_adapter_stream_exit(struct dvb_usb_adapter *adap); extern int dvb_usb_i2c_init(struct dvb_usb_device *); extern int dvb_usb_i2c_exit(struct dvb_usb_device *); -extern int dvb_usb_adapter_dvb_init(struct dvb_usb_adapter *adap); +extern int dvb_usb_adapter_dvb_init(struct dvb_usb_adapter *adap, + short *adapter_nums); extern int dvb_usb_adapter_dvb_exit(struct dvb_usb_adapter *adap); extern int dvb_usb_adapter_frontend_init(struct dvb_usb_adapter *adap); extern int dvb_usb_adapter_frontend_exit(struct dvb_usb_adapter *adap); diff --git a/linux/drivers/media/dvb/dvb-usb/dvb-usb-dvb.c b/linux/drivers/media/dvb/dvb-usb/dvb-usb-dvb.c index 4561a672d..ce8cd0c5d 100644 --- a/linux/drivers/media/dvb/dvb-usb/dvb-usb-dvb.c +++ b/linux/drivers/media/dvb/dvb-usb/dvb-usb-dvb.c @@ -77,12 +77,13 @@ static int dvb_usb_stop_feed(struct dvb_demux_feed *dvbdmxfeed) return dvb_usb_ctrl_feed(dvbdmxfeed,0); } -int dvb_usb_adapter_dvb_init(struct dvb_usb_adapter *adap) +int dvb_usb_adapter_dvb_init(struct dvb_usb_adapter *adap, short *adapter_nums) { - int ret; + int ret = dvb_register_adapter(&adap->dvb_adap, adap->dev->desc->name, + adap->dev->owner, &adap->dev->udev->dev, + adapter_nums); - if ((ret = dvb_register_adapter(&adap->dvb_adap, adap->dev->desc->name, - adap->dev->owner, &adap->dev->udev->dev)) < 0) { + if (ret < 0) { deb_info("dvb_register_adapter failed: error %d", ret); goto err; } diff --git a/linux/drivers/media/dvb/dvb-usb/dvb-usb-firmware.c b/linux/drivers/media/dvb/dvb-usb/dvb-usb-firmware.c index e1112e39f..733a7ff7b 100644 --- a/linux/drivers/media/dvb/dvb-usb/dvb-usb-firmware.c +++ b/linux/drivers/media/dvb/dvb-usb/dvb-usb-firmware.c @@ -127,7 +127,7 @@ int dvb_usb_get_hexline(const struct firmware *fw, struct hexline *hx, if ((*pos + hx->len + 4) >= fw->size) return -EINVAL; - hx->addr = le16_to_cpu( *((u16 *) &b[1]) ); + hx->addr = b[1] | (b[2] << 8); hx->type = b[3]; if (hx->type == 0x04) { diff --git a/linux/drivers/media/dvb/dvb-usb/dvb-usb-ids.h b/linux/drivers/media/dvb/dvb-usb/dvb-usb-ids.h index 34245d1b7..e6b43fb3a 100644 --- a/linux/drivers/media/dvb/dvb-usb/dvb-usb-ids.h +++ b/linux/drivers/media/dvb/dvb-usb/dvb-usb-ids.h @@ -14,6 +14,7 @@ #define USB_VID_AFATECH 0x15a4 #define USB_VID_ALCOR_MICRO 0x058f #define USB_VID_ALINK 0x05e3 +#define USB_VID_AMT 0x1c73 #define USB_VID_ANCHOR 0x0547 #define USB_VID_ANSONIC 0x10b9 #define USB_VID_ANUBIS_ELECTRONIC 0x10fd @@ -57,6 +58,7 @@ #define USB_PID_AFATECH_AF9005 0x9020 #define USB_VID_ALINK_DTU 0xf170 #define USB_PID_ANSONIC_DVBT_USB 0x6000 +#define USB_PID_ANYSEE 0x861f #define USB_PID_AVERMEDIA_DVBT_USB_COLD 0x0001 #define USB_PID_AVERMEDIA_DVBT_USB_WARM 0x0002 #define USB_PID_AVERMEDIA_DVBT_USB2_COLD 0xa800 diff --git a/linux/drivers/media/dvb/dvb-usb/dvb-usb-init.c b/linux/drivers/media/dvb/dvb-usb/dvb-usb-init.c index cdd717c3f..e331db8c7 100644 --- a/linux/drivers/media/dvb/dvb-usb/dvb-usb-init.c +++ b/linux/drivers/media/dvb/dvb-usb/dvb-usb-init.c @@ -26,7 +26,7 @@ static int dvb_usb_force_pid_filter_usage; module_param_named(force_pid_filter_usage, dvb_usb_force_pid_filter_usage, int, 0444); MODULE_PARM_DESC(force_pid_filter_usage, "force all dvb-usb-devices to use a PID filter, if any (default: 0)."); -static int dvb_usb_adapter_init(struct dvb_usb_device *d) +static int dvb_usb_adapter_init(struct dvb_usb_device *d, short *adapter_nrs) { struct dvb_usb_adapter *adap; int ret,n; @@ -72,7 +72,7 @@ static int dvb_usb_adapter_init(struct dvb_usb_device *d) } if ((ret = dvb_usb_adapter_stream_init(adap)) || - (ret = dvb_usb_adapter_dvb_init(adap)) || + (ret = dvb_usb_adapter_dvb_init(adap, adapter_nrs)) || (ret = dvb_usb_adapter_frontend_init(adap))) { return ret; } @@ -122,7 +122,7 @@ static int dvb_usb_exit(struct dvb_usb_device *d) return 0; } -static int dvb_usb_init(struct dvb_usb_device *d) +static int dvb_usb_init(struct dvb_usb_device *d, short *adapter_nums) { int ret = 0; @@ -143,7 +143,7 @@ static int dvb_usb_init(struct dvb_usb_device *d) dvb_usb_device_power_ctrl(d, 1); if ((ret = dvb_usb_i2c_init(d)) || - (ret = dvb_usb_adapter_init(d))) { + (ret = dvb_usb_adapter_init(d, adapter_nums))) { dvb_usb_exit(d); return ret; } @@ -213,8 +213,10 @@ int dvb_usb_device_power_ctrl(struct dvb_usb_device *d, int onoff) /* * USB */ -int dvb_usb_device_init(struct usb_interface *intf, struct dvb_usb_device_properties - *props, struct module *owner,struct dvb_usb_device **du) +int dvb_usb_device_init(struct usb_interface *intf, + struct dvb_usb_device_properties *props, + struct module *owner, struct dvb_usb_device **du, + short *adapter_nums) { struct usb_device *udev = interface_to_usbdev(intf); struct dvb_usb_device *d = NULL; @@ -254,7 +256,7 @@ int dvb_usb_device_init(struct usb_interface *intf, struct dvb_usb_device_proper if (du != NULL) *du = d; - ret = dvb_usb_init(d); + ret = dvb_usb_init(d, adapter_nums); if (ret == 0) info("%s successfully initialized and connected.",desc->name); diff --git a/linux/drivers/media/dvb/dvb-usb/dvb-usb.h b/linux/drivers/media/dvb/dvb-usb/dvb-usb.h index cc5d432bc..f8528bf74 100644 --- a/linux/drivers/media/dvb/dvb-usb/dvb-usb.h +++ b/linux/drivers/media/dvb/dvb-usb/dvb-usb.h @@ -387,7 +387,10 @@ struct dvb_usb_device { void *priv; }; -extern int dvb_usb_device_init(struct usb_interface *, struct dvb_usb_device_properties *, struct module *, struct dvb_usb_device **); +extern int dvb_usb_device_init(struct usb_interface *, + struct dvb_usb_device_properties *, + struct module *, struct dvb_usb_device **, + short *adapter_nums); extern void dvb_usb_device_exit(struct usb_interface *); /* the generic read/write method for device control */ diff --git a/linux/drivers/media/dvb/dvb-usb/gl861.c b/linux/drivers/media/dvb/dvb-usb/gl861.c index 8f26ede0c..cc90a3054 100644 --- a/linux/drivers/media/dvb/dvb-usb/gl861.c +++ b/linux/drivers/media/dvb/dvb-usb/gl861.c @@ -16,6 +16,8 @@ static int dvb_usb_gl861_debug; module_param_named(debug,dvb_usb_gl861_debug, int, 0644); MODULE_PARM_DESC(debug, "set debugging level (1=rc (or-able))." DVB_USB_DEBUG_STATUS); +DVB_DEFINE_MOD_OPT_ADAPTER_NR(adapter_nr); + static int gl861_i2c_msg(struct dvb_usb_device *d, u8 addr, u8 *wbuf, u16 wlen, u8 *rbuf, u16 rlen) { @@ -140,7 +142,9 @@ static int gl861_probe(struct usb_interface *intf, if (intf->num_altsetting < 2) return -ENODEV; - if ((ret = dvb_usb_device_init(intf, &gl861_properties, THIS_MODULE, &d)) == 0) { + ret = dvb_usb_device_init(intf, &gl861_properties, THIS_MODULE, &d, + adapter_nr); + if (ret == 0) { alt = usb_altnum_to_altsetting(intf, 0); if (alt == NULL) { diff --git a/linux/drivers/media/dvb/dvb-usb/gp8psk-fe.c b/linux/drivers/media/dvb/dvb-usb/gp8psk-fe.c index e37142d92..262a858c3 100644 --- a/linux/drivers/media/dvb/dvb-usb/gp8psk-fe.c +++ b/linux/drivers/media/dvb/dvb-usb/gp8psk-fe.c @@ -152,7 +152,7 @@ static int gp8psk_fe_send_diseqc_msg (struct dvb_frontend* fe, { struct gp8psk_fe_state *st = fe->demodulator_priv; - deb_fe("%s\n",__FUNCTION__); + deb_fe("%s\n",__func__); if (gp8psk_usb_out_op(st->d,SEND_DISEQC_COMMAND, m->msg[0], 0, m->msg, m->msg_len)) { @@ -167,7 +167,7 @@ static int gp8psk_fe_send_diseqc_burst (struct dvb_frontend* fe, struct gp8psk_fe_state *st = fe->demodulator_priv; u8 cmd; - deb_fe("%s\n",__FUNCTION__); + deb_fe("%s\n",__func__); /* These commands are certainly wrong */ cmd = (burst == SEC_MINI_A) ? 0x00 : 0x01; diff --git a/linux/drivers/media/dvb/dvb-usb/gp8psk.c b/linux/drivers/media/dvb/dvb-usb/gp8psk.c index 54ecee36d..0a152fcb5 100644 --- a/linux/drivers/media/dvb/dvb-usb/gp8psk.c +++ b/linux/drivers/media/dvb/dvb-usb/gp8psk.c @@ -22,6 +22,8 @@ int dvb_usb_gp8psk_debug; module_param_named(debug,dvb_usb_gp8psk_debug, int, 0644); MODULE_PARM_DESC(debug, "set debugging level (1=info,xfer=2,rc=4 (or-able))." DVB_USB_DEBUG_STATUS); +DVB_DEFINE_MOD_OPT_ADAPTER_NR(adapter_nr); + int gp8psk_usb_in_op(struct dvb_usb_device *d, u8 req, u16 value, u16 index, u8 *b, int blen) { int ret = 0,try = 0; @@ -144,24 +146,24 @@ static int gp8psk_power_ctrl(struct dvb_usb_device *d, int onoff) if (gp_product_id == USB_PID_GENPIX_8PSK_REV_1_WARM) if (! (status & bm8pskFW_Loaded)) /* BCM4500 firmware loaded */ if(gp8psk_load_bcm4500fw(d)) - return EINVAL; + return -EINVAL; if (! (status & bmIntersilOn)) /* LNB Power */ if (gp8psk_usb_in_op(d, START_INTERSIL, 1, 0, &buf, 1)) - return EINVAL; + return -EINVAL; /* Set DVB mode to 1 */ if (gp_product_id == USB_PID_GENPIX_8PSK_REV_1_WARM) if (gp8psk_usb_out_op(d, SET_DVB_MODE, 1, 0, NULL, 0)) - return EINVAL; + return -EINVAL; /* Abort possible TS (if previous tune crashed) */ if (gp8psk_usb_out_op(d, ARM_TRANSFER, 0, 0, NULL, 0)) - return EINVAL; + return -EINVAL; } else { /* Turn off LNB power */ if (gp8psk_usb_in_op(d, START_INTERSIL, 0, 0, &buf, 1)) - return EINVAL; + return -EINVAL; /* Turn off 8psk power */ if (gp8psk_usb_in_op(d, BOOT_8PSK, 0, 0, &buf, 1)) return -EINVAL; @@ -208,7 +210,8 @@ static int gp8psk_usb_probe(struct usb_interface *intf, { int ret; struct usb_device *udev = interface_to_usbdev(intf); - ret = dvb_usb_device_init(intf,&gp8psk_properties,THIS_MODULE,NULL); + ret = dvb_usb_device_init(intf, &gp8psk_properties, + THIS_MODULE, NULL, adapter_nr); if (ret == 0) { info("found Genpix USB device pID = %x (hex)", le16_to_cpu(udev->descriptor.idProduct)); diff --git a/linux/drivers/media/dvb/dvb-usb/m920x.c b/linux/drivers/media/dvb/dvb-usb/m920x.c index 503598127..5a7766fab 100644 --- a/linux/drivers/media/dvb/dvb-usb/m920x.c +++ b/linux/drivers/media/dvb/dvb-usb/m920x.c @@ -16,12 +16,15 @@ #include "qt1010.h" #include "tda1004x.h" #include "tda827x.h" +#include <asm/unaligned.h> /* debug */ static int dvb_usb_m920x_debug; module_param_named(debug,dvb_usb_m920x_debug, int, 0644); MODULE_PARM_DESC(debug, "set debugging level (1=rc (or-able))." DVB_USB_DEBUG_STATUS); +DVB_DEFINE_MOD_OPT_ADAPTER_NR(adapter_nr); + static int m920x_set_filter(struct dvb_usb_device *d, int type, int idx, int pid); static inline int m920x_read(struct usb_device *udev, u8 request, u16 value, @@ -345,13 +348,13 @@ static int m920x_firmware_download(struct usb_device *udev, const struct firmwar for (pass = 0; pass < 2; pass++) { for (i = 0; i + (sizeof(u16) * 3) < fw->size;) { - value = le16_to_cpu(*(u16 *)(fw->data + i)); + value = get_unaligned_le16(fw->data + i); i += sizeof(u16); - index = le16_to_cpu(*(u16 *)(fw->data + i)); + index = get_unaligned_le16(fw->data + i); i += sizeof(u16); - size = le16_to_cpu(*(u16 *)(fw->data + i)); + size = get_unaligned_le16(fw->data + i); i += sizeof(u16); if (pass == 1) { @@ -477,7 +480,7 @@ static struct qt1010_config m920x_qt1010_config = { /* Callbacks for DVB USB */ static int m920x_mt352_frontend_attach(struct dvb_usb_adapter *adap) { - deb("%s\n",__FUNCTION__); + deb("%s\n",__func__); if ((adap->fe = dvb_attach(mt352_attach, &m920x_mt352_config, @@ -489,7 +492,7 @@ static int m920x_mt352_frontend_attach(struct dvb_usb_adapter *adap) static int m920x_tda10046_08_frontend_attach(struct dvb_usb_adapter *adap) { - deb("%s\n",__FUNCTION__); + deb("%s\n",__func__); if ((adap->fe = dvb_attach(tda10046_attach, &m920x_tda10046_08_config, @@ -501,7 +504,7 @@ static int m920x_tda10046_08_frontend_attach(struct dvb_usb_adapter *adap) static int m920x_tda10046_0b_frontend_attach(struct dvb_usb_adapter *adap) { - deb("%s\n",__FUNCTION__); + deb("%s\n",__func__); if ((adap->fe = dvb_attach(tda10046_attach, &m920x_tda10046_0b_config, @@ -513,7 +516,7 @@ static int m920x_tda10046_0b_frontend_attach(struct dvb_usb_adapter *adap) static int m920x_qt1010_tuner_attach(struct dvb_usb_adapter *adap) { - deb("%s\n",__FUNCTION__); + deb("%s\n",__func__); if (dvb_attach(qt1010_attach, adap->fe, &adap->dev->i2c_adap, &m920x_qt1010_config) == NULL) return -ENODEV; @@ -523,7 +526,7 @@ static int m920x_qt1010_tuner_attach(struct dvb_usb_adapter *adap) static int m920x_tda8275_60_tuner_attach(struct dvb_usb_adapter *adap) { - deb("%s\n",__FUNCTION__); + deb("%s\n",__func__); if (dvb_attach(tda827x_attach, adap->fe, 0x60, &adap->dev->i2c_adap, NULL) == NULL) return -ENODEV; @@ -533,7 +536,7 @@ static int m920x_tda8275_60_tuner_attach(struct dvb_usb_adapter *adap) static int m920x_tda8275_61_tuner_attach(struct dvb_usb_adapter *adap) { - deb("%s\n",__FUNCTION__); + deb("%s\n",__func__); if (dvb_attach(tda827x_attach, adap->fe, 0x61, &adap->dev->i2c_adap, NULL) == NULL) return -ENODEV; @@ -618,27 +621,31 @@ static int m920x_probe(struct usb_interface *intf, * multi-tuner device */ - if ((ret = dvb_usb_device_init(intf, &megasky_properties, - THIS_MODULE, &d)) == 0) { + ret = dvb_usb_device_init(intf, &megasky_properties, + THIS_MODULE, &d, adapter_nr); + if (ret == 0) { rc_init_seq = megasky_rc_init; goto found; } - if ((ret = dvb_usb_device_init(intf, &digivox_mini_ii_properties, - THIS_MODULE, &d)) == 0) { + ret = dvb_usb_device_init(intf, &digivox_mini_ii_properties, + THIS_MODULE, &d, adapter_nr); + if (ret == 0) { /* No remote control, so no rc_init_seq */ goto found; } /* This configures both tuners on the TV Walker Twin */ - if ((ret = dvb_usb_device_init(intf, &tvwalkertwin_properties, - THIS_MODULE, &d)) == 0) { + ret = dvb_usb_device_init(intf, &tvwalkertwin_properties, + THIS_MODULE, &d, adapter_nr); + if (ret == 0) { rc_init_seq = tvwalkertwin_rc_init; goto found; } - if ((ret = dvb_usb_device_init(intf, &dposh_properties, - THIS_MODULE, &d)) == 0) { + ret = dvb_usb_device_init(intf, &dposh_properties, + THIS_MODULE, &d, adapter_nr); + if (ret == 0) { /* Remote controller not supported yet. */ goto found; } diff --git a/linux/drivers/media/dvb/dvb-usb/nova-t-usb2.c b/linux/drivers/media/dvb/dvb-usb/nova-t-usb2.c index f0aadc8a2..a346040ca 100644 --- a/linux/drivers/media/dvb/dvb-usb/nova-t-usb2.c +++ b/linux/drivers/media/dvb/dvb-usb/nova-t-usb2.c @@ -15,6 +15,8 @@ static int debug; module_param(debug, int, 0644); MODULE_PARM_DESC(debug, "set debugging level (1=rc,2=eeprom (|-able))." DVB_USB_DEBUG_STATUS); +DVB_DEFINE_MOD_OPT_ADAPTER_NR(adapter_nr); + #define deb_rc(args...) dprintk(debug,0x01,args) #define deb_ee(args...) dprintk(debug,0x02,args) @@ -142,7 +144,8 @@ static struct dvb_usb_device_properties nova_t_properties; static int nova_t_probe(struct usb_interface *intf, const struct usb_device_id *id) { - return dvb_usb_device_init(intf,&nova_t_properties,THIS_MODULE,NULL); + return dvb_usb_device_init(intf, &nova_t_properties, + THIS_MODULE, NULL, adapter_nr); } /* do not change the order of the ID table */ diff --git a/linux/drivers/media/dvb/dvb-usb/opera1.c b/linux/drivers/media/dvb/dvb-usb/opera1.c index 78f55fd69..cba064615 100644 --- a/linux/drivers/media/dvb/dvb-usb/opera1.c +++ b/linux/drivers/media/dvb/dvb-usb/opera1.c @@ -45,6 +45,9 @@ module_param_named(debug, dvb_usb_opera1_debug, int, 0644); MODULE_PARM_DESC(debug, "set debugging level (1=info,xfer=2,pll=4,ts=8,err=16,rc=32,fw=64 (or-able))." DVB_USB_DEBUG_STATUS); + +DVB_DEFINE_MOD_OPT_ADAPTER_NR(adapter_nr); + #if 0 struct mutex mymutex; #endif @@ -254,7 +257,7 @@ static struct stv0299_config opera1_stv0299_config = { .mclk = 88000000UL, .invert = 1, .skip_reinit = 0, - .lock_output = STV0229_LOCKOUTPUT_0, + .lock_output = STV0299_LOCKOUTPUT_0, .volt13_op0_op1 = STV0299_VOLT13_OP0, .inittab = opera1_inittab, .set_symbol_rate = opera1_stv0299_set_symbol_rate, @@ -559,7 +562,8 @@ static int opera1_probe(struct usb_interface *intf, return -EINVAL; } - if (dvb_usb_device_init(intf, &opera1_properties, THIS_MODULE, NULL) != 0) + if (0 != dvb_usb_device_init(intf, &opera1_properties, + THIS_MODULE, NULL, adapter_nr)) return -EINVAL; return 0; } diff --git a/linux/drivers/media/dvb/dvb-usb/ttusb2.c b/linux/drivers/media/dvb/dvb-usb/ttusb2.c index 572760414..e79a26473 100644 --- a/linux/drivers/media/dvb/dvb-usb/ttusb2.c +++ b/linux/drivers/media/dvb/dvb-usb/ttusb2.c @@ -37,6 +37,8 @@ static int dvb_usb_ttusb2_debug; module_param_named(debug,dvb_usb_ttusb2_debug, int, 0644); MODULE_PARM_DESC(debug, "set debugging level (1=info (or-able))." DVB_USB_DEBUG_STATUS); +DVB_DEFINE_MOD_OPT_ADAPTER_NR(adapter_nr); + struct ttusb2_state { u8 id; }; @@ -151,6 +153,7 @@ static struct tda10086_config tda10086_config = { .demod_address = 0x0e, .invert = 0, .diseqc_tone = 1, + .xtal_freq = TDA10086_XTAL_16M, }; static int ttusb2_frontend_attach(struct dvb_usb_adapter *adap) @@ -187,8 +190,10 @@ static struct dvb_usb_device_properties ttusb2_properties_s2400; static int ttusb2_probe(struct usb_interface *intf, const struct usb_device_id *id) { - if (dvb_usb_device_init(intf, &ttusb2_properties, THIS_MODULE, NULL) == 0 || - dvb_usb_device_init(intf, &ttusb2_properties_s2400, THIS_MODULE, NULL) == 0) + if (0 == dvb_usb_device_init(intf, &ttusb2_properties, + THIS_MODULE, NULL, adapter_nr) || + 0 == dvb_usb_device_init(intf, &ttusb2_properties_s2400, + THIS_MODULE, NULL, adapter_nr)) return 0; return -ENODEV; } diff --git a/linux/drivers/media/dvb/dvb-usb/umt-010.c b/linux/drivers/media/dvb/dvb-usb/umt-010.c index f0aff4b0d..ca850d266 100644 --- a/linux/drivers/media/dvb/dvb-usb/umt-010.c +++ b/linux/drivers/media/dvb/dvb-usb/umt-010.c @@ -13,6 +13,8 @@ #include "mt352.h" +DVB_DEFINE_MOD_OPT_ADAPTER_NR(adapter_nr); + static int umt_mt352_demod_init(struct dvb_frontend *fe) { static u8 mt352_clock_config[] = { 0x89, 0xb8, 0x2d }; @@ -75,7 +77,8 @@ static struct dvb_usb_device_properties umt_properties; static int umt_probe(struct usb_interface *intf, const struct usb_device_id *id) { - if (dvb_usb_device_init(intf,&umt_properties,THIS_MODULE,NULL) == 0) + if (0 == dvb_usb_device_init(intf, &umt_properties, + THIS_MODULE, NULL, adapter_nr)) return 0; return -EINVAL; } diff --git a/linux/drivers/media/dvb/dvb-usb/vp702x-fe.c b/linux/drivers/media/dvb/dvb-usb/vp702x-fe.c index c3fdc7cd0..ccc7e4452 100644 --- a/linux/drivers/media/dvb/dvb-usb/vp702x-fe.c +++ b/linux/drivers/media/dvb/dvb-usb/vp702x-fe.c @@ -67,7 +67,7 @@ static int vp702x_fe_read_status(struct dvb_frontend* fe, fe_status_t *status) { struct vp702x_fe_state *st = fe->demodulator_priv; vp702x_fe_refresh_state(st); - deb_fe("%s\n",__FUNCTION__); + deb_fe("%s\n",__func__); if (st->lock == 0) *status = FE_HAS_LOCK | FE_HAS_SYNC | FE_HAS_VITERBI | FE_HAS_SIGNAL | FE_HAS_CARRIER; @@ -121,7 +121,7 @@ static int vp702x_fe_read_snr(struct dvb_frontend* fe, u16 *snr) static int vp702x_fe_get_tune_settings(struct dvb_frontend* fe, struct dvb_frontend_tune_settings *tune) { - deb_fe("%s\n",__FUNCTION__); + deb_fe("%s\n",__func__); tune->min_delay_ms = 2000; return 0; } @@ -183,21 +183,21 @@ static int vp702x_fe_set_frontend(struct dvb_frontend* fe, static int vp702x_fe_init(struct dvb_frontend *fe) { struct vp702x_fe_state *st = fe->demodulator_priv; - deb_fe("%s\n",__FUNCTION__); + deb_fe("%s\n",__func__); vp702x_usb_in_op(st->d, RESET_TUNER, 0, 0, NULL, 0); return 0; } static int vp702x_fe_sleep(struct dvb_frontend *fe) { - deb_fe("%s\n",__FUNCTION__); + deb_fe("%s\n",__func__); return 0; } static int vp702x_fe_get_frontend(struct dvb_frontend* fe, struct dvb_frontend_parameters *fep) { - deb_fe("%s\n",__FUNCTION__); + deb_fe("%s\n",__func__); return 0; } @@ -208,7 +208,7 @@ static int vp702x_fe_send_diseqc_msg (struct dvb_frontend* fe, u8 cmd[8],ibuf[10]; memset(cmd,0,8); - deb_fe("%s\n",__FUNCTION__); + deb_fe("%s\n",__func__); if (m->msg_len > 4) return -EINVAL; @@ -230,7 +230,7 @@ static int vp702x_fe_send_diseqc_msg (struct dvb_frontend* fe, static int vp702x_fe_send_diseqc_burst (struct dvb_frontend* fe, fe_sec_mini_cmd_t burst) { - deb_fe("%s\n",__FUNCTION__); + deb_fe("%s\n",__func__); return 0; } @@ -238,7 +238,7 @@ static int vp702x_fe_set_tone(struct dvb_frontend* fe, fe_sec_tone_mode_t tone) { struct vp702x_fe_state *st = fe->demodulator_priv; u8 ibuf[10]; - deb_fe("%s\n",__FUNCTION__); + deb_fe("%s\n",__func__); st->tone_mode = tone; @@ -263,7 +263,7 @@ static int vp702x_fe_set_voltage (struct dvb_frontend* fe, fe_sec_voltage_t { struct vp702x_fe_state *st = fe->demodulator_priv; u8 ibuf[10]; - deb_fe("%s\n",__FUNCTION__); + deb_fe("%s\n",__func__); st->voltage = voltage; diff --git a/linux/drivers/media/dvb/dvb-usb/vp702x.c b/linux/drivers/media/dvb/dvb-usb/vp702x.c index 28b7011f2..9d286d430 100644 --- a/linux/drivers/media/dvb/dvb-usb/vp702x.c +++ b/linux/drivers/media/dvb/dvb-usb/vp702x.c @@ -21,6 +21,8 @@ int dvb_usb_vp702x_debug; module_param_named(debug,dvb_usb_vp702x_debug, int, 0644); MODULE_PARM_DESC(debug, "set debugging level (1=info,xfer=2,rc=4 (or-able))." DVB_USB_DEBUG_STATUS); +DVB_DEFINE_MOD_OPT_ADAPTER_NR(adapter_nr); + struct vp702x_state { int pid_filter_count; int pid_filter_can_bypass; @@ -285,7 +287,8 @@ static struct dvb_usb_device_properties vp702x_properties; static int vp702x_usb_probe(struct usb_interface *intf, const struct usb_device_id *id) { - return dvb_usb_device_init(intf,&vp702x_properties,THIS_MODULE,NULL); + return dvb_usb_device_init(intf, &vp702x_properties, + THIS_MODULE, NULL, adapter_nr); } static struct usb_device_id vp702x_usb_table [] = { diff --git a/linux/drivers/media/dvb/dvb-usb/vp7045.c b/linux/drivers/media/dvb/dvb-usb/vp7045.c index 9d244e603..b45498911 100644 --- a/linux/drivers/media/dvb/dvb-usb/vp7045.c +++ b/linux/drivers/media/dvb/dvb-usb/vp7045.c @@ -18,6 +18,9 @@ static int dvb_usb_vp7045_debug; module_param_named(debug,dvb_usb_vp7045_debug, int, 0644); MODULE_PARM_DESC(debug, "set debugging level (1=info,xfer=2,rc=4 (or-able))." DVB_USB_DEBUG_STATUS); + +DVB_DEFINE_MOD_OPT_ADAPTER_NR(adapter_nr); + #define deb_info(args...) dprintk(dvb_usb_vp7045_debug,0x01,args) #define deb_xfer(args...) dprintk(dvb_usb_vp7045_debug,0x02,args) #define deb_rc(args...) dprintk(dvb_usb_vp7045_debug,0x04,args) @@ -227,7 +230,8 @@ static struct dvb_usb_device_properties vp7045_properties; static int vp7045_usb_probe(struct usb_interface *intf, const struct usb_device_id *id) { - return dvb_usb_device_init(intf,&vp7045_properties,THIS_MODULE,NULL); + return dvb_usb_device_init(intf, &vp7045_properties, + THIS_MODULE, NULL, adapter_nr); } static struct usb_device_id vp7045_usb_table [] = { |