2 files changed, 23 insertions, 19 deletions

diff --git a/linux/drivers/media/dvb/ttpci/av7110_v4l.c b/linux/drivers/media/dvb/ttpci/av7110_v4l.c
index 0510a80f2..3795432ad 100644
--- a/linux/drivers/media/dvb/ttpci/av7110_v4l.c
+++ b/linux/drivers/media/dvb/ttpci/av7110_v4l.c
@@ -141,17 +141,6 @@ static int ves1820_writereg(struct saa7146_dev *dev, u8 addr, u8 reg, u8 data)
 	return 0;
 }
 
-static int stv0297_writereg(struct saa7146_dev *dev, u8 addr, u8 reg, u8 data)
-{
-	u8 buf [] = { reg, data };
-	struct i2c_msg msg = { .addr = addr, .flags = 0, .buf = buf, .len = 2 };
-
-	if (1 != saa7146_i2c_transfer(dev, &msg, 1, 1))
-		return -1;
-	return 0;
-}
-
-
 static int tuner_write(struct saa7146_dev *dev, u8 addr, u8 data [4])
 {
 	struct i2c_msg msg = { .addr = addr, .flags = 0, .buf = data, .len = 4 };
@@ -194,6 +183,7 @@ static int ves1820_set_tv_freq(struct saa7146_dev *dev, u32 freq)
 
 static int stv0297_set_tv_freq(struct saa7146_dev *dev, u32 freq)
 {
+	struct av7110 *av7110 = (struct av7110*)dev->ext_priv;
 	u32 div;
 	u8 data[4];
 
@@ -214,8 +204,8 @@ static int stv0297_set_tv_freq(struct saa7146_dev *dev, u32 freq)
 	else
 		return -EINVAL;
 
-	stv0297_writereg(dev, 0x1C, 0x87, 0x78);
-	stv0297_writereg(dev, 0x1C, 0x86, 0xc8);
+	if (av7110->fe->ops.i2c_gate_ctrl)
+		av7110->fe->ops.i2c_gate_ctrl(av7110->fe, 1);
 	return tuner_write(dev, 0x63, data);
 }
 
diff --git a/linux/drivers/media/dvb/ttpci/budget-ci.c b/linux/drivers/media/dvb/ttpci/budget-ci.c
index f86ba0010..7cb60e37b 100644
--- a/linux/drivers/media/dvb/ttpci/budget-ci.c
+++ b/linux/drivers/media/dvb/ttpci/budget-ci.c
@@ -130,6 +130,7 @@ static void msp430_ir_interrupt(unsigned long data)
 	int toggle;
 	static int prev_toggle = -1;
 	static u32 ir_key;
+	static int state = 0;
 	u32 command = ttpci_budget_debiread(&budget_ci->budget, DEBINOSWAP, DEBIADDR_IR, 2, 1, 0) >> 8;
 
 	/*
@@ -138,21 +139,34 @@ static void msp430_ir_interrupt(unsigned long data)
 	 * type1: X1CCCCCC, C = command bits (0 - 63)
 	 * type2: X0TDDDDD, D = device bits (0 - 31), T = RC5 toggle bit
 	 *
-	 * More than one command byte may be generated before the device byte
-	 * Only when we have both, a correct keypress is generated
+	 * Each signal from the remote control can generate one or more command
+	 * bytes and one or more device bytes. For the repeated bytes, the
+	 * highest bit (X) is set. The first command byte is always generated
+	 * before the first device byte. Other than that, no specific order
+	 * seems to apply.
+	 *
+	 * Only when we have a command and device byte, a keypress is
+	 * generated.
 	 */
 
+	if (ir_debug)
+		printk("budget_ci: received byte 0x%02x\n", command);
+
+	/* Is this a repeated byte? */
+	if (command & 0x80)
+		return;
+
 	/* Is this a RC5 command byte? */
 	if (command & 0x40) {
-		if (ir_debug)
-			printk("budget_ci: received command byte 0x%02x\n", command);
+		state = 1;
 		ir_key = command & 0x3f;
 		return;
 	}
 
 	/* It's a RC5 device byte */
-	if (ir_debug)
-		printk("budget_ci: received device byte 0x%02x\n", command);
+	if (!state)
+		return;
+	state = 0;
 	device = command & 0x1f;
 	toggle = command & 0x20;