diff options
Diffstat (limited to 'linux/drivers/media/video/Kconfig')
| -rw-r--r-- | linux/drivers/media/video/Kconfig | 168 |
1 files changed, 139 insertions, 29 deletions
diff --git a/linux/drivers/media/video/Kconfig b/linux/drivers/media/video/Kconfig index 534a022c4..14a1b6160 100644 --- a/linux/drivers/media/video/Kconfig +++ b/linux/drivers/media/video/Kconfig @@ -203,9 +203,9 @@ config VIDEO_CS53L32A module will be called cs53l32a. config VIDEO_M52790 - tristate "Mitsubishi M52790 A/V switch" - depends on VIDEO_V4L2 && I2C - ---help--- + tristate "Mitsubishi M52790 A/V switch" + depends on VIDEO_V4L2 && I2C + ---help--- Support for the Mitsubishi M52790 A/V switch. To compile this driver as a module, choose M here: the @@ -249,6 +249,20 @@ config VIDEO_VP27SMPX To compile this driver as a module, choose M here: the module will be called vp27smpx. +comment "RDS decoders" + +config VIDEO_SAA6588 + tristate "SAA6588 Radio Chip RDS decoder support" + depends on VIDEO_V4L2 && I2C + + help + Support for this Radio Data System (RDS) decoder. This allows + seeing radio station identification transmitted using this + standard. + + To compile this driver as a module, choose M here: the + module will be called saa6588. + comment "Video decoders" config VIDEO_BT819 @@ -298,6 +312,14 @@ config VIDEO_OV7670 OV7670 VGA camera. It currently only works with the M88ALP01 controller. +config VIDEO_MT9V011 + tristate "Micron mt9v011 sensor support" + depends on I2C && VIDEO_V4L2 + ---help--- + This is a Video4Linux2 sensor-level driver for the Micron + mt0v011 1.3 Mpixel camera. It currently only works with the + em28xx driver. + config VIDEO_TCM825X tristate "TCM825x camera sensor support" depends on I2C && VIDEO_V4L2 @@ -426,6 +448,24 @@ config VIDEO_ADV7175 To compile this driver as a module, choose M here: the module will be called adv7175. +config VIDEO_THS7303 + tristate "THS7303 Video Amplifier" + depends on I2C + help + Support for TI THS7303 video amplifier + + To compile this driver as a module, choose M here: the + module will be called ths7303. + +config VIDEO_ADV7343 + tristate "ADV7343 video encoder" + depends on I2C + help + Support for Analog Devices I2C bus based ADV7343 encoder. + + To compile this driver as a module, choose M here: the + module will be called adv7343. + comment "Video improvement chips" config VIDEO_UPD64031A @@ -453,6 +493,28 @@ config VIDEO_UPD64083 endmenu # encoder / decoder chips +config DISPLAY_DAVINCI_DM646X_EVM + tristate "DM646x EVM Video Display" + depends on VIDEO_DEV && MACH_DAVINCI_DM6467_EVM + select VIDEOBUF_DMA_CONTIG + select VIDEO_DAVINCI_VPIF + select VIDEO_ADV7343 + select VIDEO_THS7303 + help + Support for DaVinci based display device. + + To compile this driver as a module, choose M here: the + module will be called davincihd_display. + +config VIDEO_DAVINCI_VPIF + tristate "DaVinci VPIF Driver" + depends on DISPLAY_DAVINCI_DM646X_EVM + help + Support for DaVinci VPIF Driver. + + To compile this driver as a module, choose M here: the + module will be called vpif. + config VIDEO_VIVI tristate "Virtual Video Driver" depends on VIDEO_DEV && VIDEO_V4L2 && !SPARC32 && !SPARC64 @@ -465,19 +527,56 @@ config VIDEO_VIVI Say Y here if you want to test video apps or debug V4L devices. In doubt, say N. -source "drivers/media/video/bt8xx/Kconfig" - -config VIDEO_SAA6588 - tristate "SAA6588 Radio Chip RDS decoder support on BT848 cards" - depends on I2C && VIDEO_BT848 +config VIDEO_VPSS_SYSTEM + tristate "VPSS System module driver" + depends on ARCH_DAVINCI + help + Support for vpss system module for video driver + default y +config VIDEO_VPFE_CAPTURE + tristate "VPFE Video Capture Driver" + depends on VIDEO_V4L2 && ARCH_DAVINCI + select VIDEOBUF_DMA_CONTIG help - Support for Radio Data System (RDS) decoder. This allows seeing - radio station identification transmitted using this standard. - Currently, it works only with bt8x8 chips. + Support for DMXXXX VPFE based frame grabber. This is the + common V4L2 module for following DMXXX SoCs from Texas + Instruments:- DM6446 & DM355. To compile this driver as a module, choose M here: the - module will be called saa6588. + module will be called vpfe-capture. + +config VIDEO_DM6446_CCDC + tristate "DM6446 CCDC HW module" + depends on ARCH_DAVINCI_DM644x && VIDEO_VPFE_CAPTURE + select VIDEO_VPSS_SYSTEM + default y + help + Enables DaVinci CCD hw module. DaVinci CCDC hw interfaces + with decoder modules such as TVP5146 over BT656 or + sensor module such as MT9T001 over a raw interface. This + module configures the interface and CCDC/ISIF to do + video frame capture from slave decoders. + + To compile this driver as a module, choose M here: the + module will be called vpfe. + +config VIDEO_DM355_CCDC + tristate "DM355 CCDC HW module" + depends on ARCH_DAVINCI_DM355 && VIDEO_VPFE_CAPTURE + select VIDEO_VPSS_SYSTEM + default y + help + Enables DM355 CCD hw module. DM355 CCDC hw interfaces + with decoder modules such as TVP5146 over BT656 or + sensor module such as MT9T001 over a raw interface. This + module configures the interface and CCDC/ISIF to do + video frame capture from a slave decoders + + To compile this driver as a module, choose M here: the + module will be called vpfe. + +source "drivers/media/video/bt8xx/Kconfig" config VIDEO_PMS tristate "Mediavision Pro Movie Studio Video For Linux" @@ -692,7 +791,7 @@ config VIDEO_CAFE_CCIC config SOC_CAMERA tristate "SoC camera support" - depends on VIDEO_V4L2 && HAS_DMA + depends on VIDEO_V4L2 && HAS_DMA && I2C select VIDEOBUF_GEN help SoC Camera is a common API to several cameras, not connecting @@ -707,13 +806,6 @@ config SOC_CAMERA_MT9M001 This driver supports MT9M001 cameras from Micron, monochrome and colour models. -config MT9M001_PCA9536_SWITCH - bool "pca9536 datawidth switch for mt9m001" - depends on SOC_CAMERA_MT9M001 && GENERIC_GPIO - help - Select this if your MT9M001 camera uses a PCA9536 I2C GPIO - extender to switch between 8 and 10 bit datawidth modes - config SOC_CAMERA_MT9M111 tristate "mt9m111 and mt9m112 support" depends on SOC_CAMERA && I2C @@ -733,13 +825,6 @@ config SOC_CAMERA_MT9V022 help This driver supports MT9V022 cameras from Micron -config MT9V022_PCA9536_SWITCH - bool "pca9536 datawidth switch for mt9v022" - depends on SOC_CAMERA_MT9V022 && GENERIC_GPIO - help - Select this if your MT9V022 camera uses a PCA9536 I2C GPIO - extender to switch between 8 and 10 bit datawidth modes - config SOC_CAMERA_TW9910 tristate "tw9910 support" depends on SOC_CAMERA && I2C @@ -758,10 +843,26 @@ config SOC_CAMERA_OV772X help This is a ov772x camera driver +config MX1_VIDEO + bool + +config VIDEO_MX1 + tristate "i.MX1/i.MXL CMOS Sensor Interface driver" + depends on VIDEO_DEV && ARCH_MX1 && SOC_CAMERA + select FIQ + select VIDEOBUF_DMA_CONTIG + select MX1_VIDEO + ---help--- + This is a v4l2 driver for the i.MX1/i.MXL CMOS Sensor Interface + +config MX3_VIDEO + bool + config VIDEO_MX3 tristate "i.MX3x Camera Sensor Interface driver" depends on VIDEO_DEV && MX3_IPU && SOC_CAMERA select VIDEOBUF_DMA_CONTIG + select MX3_VIDEO ---help--- This is a v4l2 driver for the i.MX3x Camera Sensor Interface @@ -803,8 +904,12 @@ source "drivers/media/video/gspca/Kconfig" source "drivers/media/video/pvrusb2/Kconfig" +source "drivers/media/video/hdpvr/Kconfig" + source "drivers/media/video/em28xx/Kconfig" +source "drivers/media/video/cx231xx/Kconfig" + source "drivers/media/video/usbvision/Kconfig" source "drivers/media/video/usbvideo/Kconfig" @@ -840,9 +945,13 @@ config USB_W9968CF module will be called w9968cf. config USB_OV511 - tristate "USB OV511 Camera support" + tristate "USB OV511 Camera support (DEPRECATED)" depends on VIDEO_V4L1 ---help--- + This driver is DEPRECATED please use the gspca ov519 module + instead. Note that for the ov511 / ov518 support of the gspca module + you need atleast version 0.6.0 of libv4l. + Say Y here if you want to connect this type of camera to your computer's USB port. See <file:Documentation/video4linux/ov511.txt> for more information and for a list of supported cameras. @@ -882,6 +991,8 @@ source "drivers/media/video/pwc/Kconfig" config USB_ZR364XX tristate "USB ZR364XX Camera support" depends on VIDEO_V4L2 + select VIDEOBUF_GEN + select VIDEOBUF_VMALLOC ---help--- Say Y here if you want to connect this type of camera to your computer's USB port. @@ -914,5 +1025,4 @@ config USB_S2255 This driver can be compiled as a module, called s2255drv. endif # V4L_USB_DRIVERS - endif # VIDEO_CAPTURE_DRIVERS |