diff options
Diffstat (limited to 'linux/drivers/media/video/cx18/cx18-av-core.c')
| -rw-r--r-- | linux/drivers/media/video/cx18/cx18-av-core.c | 89 |
1 files changed, 71 insertions, 18 deletions
diff --git a/linux/drivers/media/video/cx18/cx18-av-core.c b/linux/drivers/media/video/cx18/cx18-av-core.c index 780125002..a3bd2c95f 100644 --- a/linux/drivers/media/video/cx18/cx18-av-core.c +++ b/linux/drivers/media/video/cx18/cx18-av-core.c @@ -169,9 +169,14 @@ static void cx18_av_initialize(struct cx18 *cx) /* Set VGA_TRACK_RANGE to 0x20 */ cx18_av_and_or4(cx, CXADEC_DFE_CTRL2, 0xFFFF00FF, 0x00002000); - /* Enable VBI capture */ - cx18_av_write4(cx, CXADEC_OUT_CTRL1, 0x4010253F); - /* cx18_av_write4(cx, CXADEC_OUT_CTRL1, 0x4010253E); */ + /* + * Initial VBI setup + * VIP-1.1, 10 bit mode, enable Raw, disable sliced, + * don't clamp raw samples when codes are in use, 1 byte user D-words, + * IDID0 has line #, RP code V bit transition on VBLANK, data during + * blanking intervals + */ + cx18_av_write4(cx, CXADEC_OUT_CTRL1, 0x4013252e); /* Set the video input. The setting in MODE_CTRL gets lost when we do the above setup */ @@ -213,6 +218,7 @@ void cx18_av_std_setup(struct cx18 *cx) cx18_av_write(cx, 0x49f, 0x14); if (std & V4L2_STD_625_50) { + /* FIXME - revisit these for Sliced VBI */ hblank = 132; hactive = 720; burst = 93; @@ -236,13 +242,34 @@ void cx18_av_std_setup(struct cx18 *cx) sc = 672351; } } else { + /* + * The following relationships of half line counts should hold: + * 525 = vsync + vactive + vblank656 + * 12 = vblank656 - vblank + * + * vsync: always 6 half-lines of vsync pulses + * vactive: half lines of active video + * vblank656: half lines, after line 3, of blanked video + * vblank: half lines, after line 9, of blanked video + * + * vblank656 starts counting from the falling edge of the first + * vsync pulse (start of line 4) + * vblank starts counting from the after the 6 vsync pulses and + * 6 equalization pulses (start of line 10) + * + * For 525 line systems the driver will extract VBI information + * from lines 10 through 21. To avoid the EAV RP code from + * toggling at the start of hblank at line 22, where sliced VBI + * data from line 21 is stuffed, also treat line 22 as blanked. + */ + vblank656 = 38; /* lines 4 through 22 */ + vblank = 26; /* lines 10 through 22 */ + vactive = 481; /* lines 23 through 262.5 */ + hactive = 720; hblank = 122; - vactive = 487; luma_lpf = 1; uv_lpf = 1; - vblank = 26; - vblank656 = 26; src_decimation = 0x21f; if (std == V4L2_STD_PAL_60) { @@ -325,14 +352,14 @@ void cx18_av_std_setup(struct cx18 *cx) cx18_av_write(cx, 0x47d, 0xff & sc >> 8); cx18_av_write(cx, 0x47e, 0xff & sc >> 16); - /* Sets VBI parameters */ if (std & V4L2_STD_625_50) { - cx18_av_write(cx, 0x47f, 0x01); - state->vbi_line_offset = 5; + state->slicer_line_delay = 1; + state->slicer_line_offset = (6 + state->slicer_line_delay - 2); } else { - cx18_av_write(cx, 0x47f, 0x00); - state->vbi_line_offset = 8; + state->slicer_line_delay = 0; + state->slicer_line_offset = (10 + state->slicer_line_delay - 2); } + cx18_av_write(cx, 0x47f, state->slicer_line_delay); } /* ----------------------------------------------------------------------- */ @@ -680,19 +707,45 @@ static int set_v4lfmt(struct cx18 *cx, struct v4l2_format *fmt) /* ----------------------------------------------------------------------- */ +static int valid_av_cmd(unsigned int cmd) +{ + switch (cmd) { + /* All commands supported by cx18_av_cmd() */ + case VIDIOC_INT_DECODE_VBI_LINE: + case VIDIOC_INT_AUDIO_CLOCK_FREQ: + case VIDIOC_STREAMON: + case VIDIOC_STREAMOFF: + case VIDIOC_LOG_STATUS: + case VIDIOC_G_CTRL: + case VIDIOC_S_CTRL: + case VIDIOC_QUERYCTRL: + case VIDIOC_G_STD: + case VIDIOC_S_STD: + case AUDC_SET_RADIO: + case VIDIOC_INT_G_VIDEO_ROUTING: + case VIDIOC_INT_S_VIDEO_ROUTING: + case VIDIOC_INT_G_AUDIO_ROUTING: + case VIDIOC_INT_S_AUDIO_ROUTING: + case VIDIOC_S_FREQUENCY: + case VIDIOC_G_TUNER: + case VIDIOC_S_TUNER: + case VIDIOC_G_FMT: + case VIDIOC_S_FMT: + case VIDIOC_INT_RESET: + return 1; + default: + return 0; + } + return 0; +} + int cx18_av_cmd(struct cx18 *cx, unsigned int cmd, void *arg) { struct cx18_av_state *state = &cx->av_state; struct v4l2_tuner *vt = arg; struct v4l2_routing *route = arg; - /* ignore these commands */ - switch (cmd) { - case TUNER_SET_TYPE_ADDR: - return 0; - } - - if (!state->is_initialized) { + if (!state->is_initialized && valid_av_cmd(cmd)) { CX18_DEBUG_INFO("cmd %08x triggered fw load\n", cmd); /* initialize on first use */ state->is_initialized = 1; |