summaryrefslogtreecommitdiff
path: root/linux/drivers/media/video/cx23885/cx23885-dvb.c
diff options
context:
space:
mode:
Diffstat (limited to 'linux/drivers/media/video/cx23885/cx23885-dvb.c')
-rw-r--r--linux/drivers/media/video/cx23885/cx23885-dvb.c251
1 files changed, 237 insertions, 14 deletions
diff --git a/linux/drivers/media/video/cx23885/cx23885-dvb.c b/linux/drivers/media/video/cx23885/cx23885-dvb.c
index 5529dcf6a..9c690a9bd 100644
--- a/linux/drivers/media/video/cx23885/cx23885-dvb.c
+++ b/linux/drivers/media/video/cx23885/cx23885-dvb.c
@@ -46,12 +46,15 @@
#include "dibx000_common.h"
#include "zl10353.h"
#include "stv0900.h"
+#include "stv0900_reg.h"
#include "stv6110.h"
#include "lnbh24.h"
#include "cx24116.h"
#include "cimax2.h"
+#include "lgs8gxx.h"
#include "netup-eeprom.h"
#include "netup-init.h"
+#include "lgdt3305.h"
static unsigned int debug;
@@ -123,7 +126,22 @@ static struct tda10048_config hauppauge_hvr1200_config = {
.demod_address = 0x10 >> 1,
.output_mode = TDA10048_SERIAL_OUTPUT,
.fwbulkwritelen = TDA10048_BULKWRITE_200,
- .inversion = TDA10048_INVERSION_ON
+ .inversion = TDA10048_INVERSION_ON,
+ .dtv6_if_freq_khz = TDA10048_IF_3300,
+ .dtv7_if_freq_khz = TDA10048_IF_3800,
+ .dtv8_if_freq_khz = TDA10048_IF_4300,
+ .clk_freq_khz = TDA10048_CLK_16000,
+};
+
+static struct tda10048_config hauppauge_hvr1210_config = {
+ .demod_address = 0x10 >> 1,
+ .output_mode = TDA10048_SERIAL_OUTPUT,
+ .fwbulkwritelen = TDA10048_BULKWRITE_200,
+ .inversion = TDA10048_INVERSION_ON,
+ .dtv6_if_freq_khz = TDA10048_IF_3300,
+ .dtv7_if_freq_khz = TDA10048_IF_3500,
+ .dtv8_if_freq_khz = TDA10048_IF_4000,
+ .clk_freq_khz = TDA10048_CLK_16000,
};
static struct s5h1409_config hauppauge_ezqam_config = {
@@ -195,6 +213,16 @@ static struct s5h1411_config dvico_s5h1411_config = {
.mpeg_timing = S5H1411_MPEGTIMING_CONTINOUS_NONINVERTING_CLOCK,
};
+static struct s5h1411_config hcw_s5h1411_config = {
+ .output_mode = S5H1411_SERIAL_OUTPUT,
+ .gpio = S5H1411_GPIO_OFF,
+ .vsb_if = S5H1411_IF_44000,
+ .qam_if = S5H1411_IF_4000,
+ .inversion = S5H1411_INVERSION_ON,
+ .status_mode = S5H1411_DEMODLOCKING,
+ .mpeg_timing = S5H1411_MPEGTIMING_CONTINOUS_NONINVERTING_CLOCK,
+};
+
static struct xc5000_config hauppauge_hvr1500q_tunerconfig = {
.i2c_address = 0x61,
.if_khz = 5380,
@@ -216,15 +244,51 @@ static struct tda18271_std_map hauppauge_tda18271_std_map = {
.if_lvl = 6, .rfagc_top = 0x37 },
};
+static struct tda18271_std_map hauppauge_hvr1200_tda18271_std_map = {
+ .dvbt_6 = { .if_freq = 3300, .agc_mode = 3, .std = 4,
+ .if_lvl = 1, .rfagc_top = 0x37, },
+ .dvbt_7 = { .if_freq = 3800, .agc_mode = 3, .std = 5,
+ .if_lvl = 1, .rfagc_top = 0x37, },
+ .dvbt_8 = { .if_freq = 4300, .agc_mode = 3, .std = 6,
+ .if_lvl = 1, .rfagc_top = 0x37, },
+};
+
static struct tda18271_config hauppauge_tda18271_config = {
.std_map = &hauppauge_tda18271_std_map,
.gate = TDA18271_GATE_ANALOG,
};
static struct tda18271_config hauppauge_hvr1200_tuner_config = {
+ .std_map = &hauppauge_hvr1200_tda18271_std_map,
.gate = TDA18271_GATE_ANALOG,
};
+static struct tda18271_config hauppauge_hvr1210_tuner_config = {
+ .gate = TDA18271_GATE_DIGITAL,
+};
+
+static struct tda18271_std_map hauppauge_hvr127x_std_map = {
+ .atsc_6 = { .if_freq = 3250, .agc_mode = 3, .std = 4,
+ .if_lvl = 1, .rfagc_top = 0x58 },
+ .qam_6 = { .if_freq = 4000, .agc_mode = 3, .std = 5,
+ .if_lvl = 1, .rfagc_top = 0x58 },
+};
+
+static struct tda18271_config hauppauge_hvr127x_config = {
+ .std_map = &hauppauge_hvr127x_std_map,
+};
+
+static struct lgdt3305_config hauppauge_lgdt3305_config = {
+ .i2c_addr = 0x0e,
+ .mpeg_mode = LGDT3305_MPEG_SERIAL,
+ .tpclk_edge = LGDT3305_TPCLK_FALLING_EDGE,
+ .tpvalid_polarity = LGDT3305_TP_VALID_HIGH,
+ .deny_i2c_rptr = 1,
+ .spectral_inversion = 1,
+ .qam_if_khz = 4000,
+ .vsb_if_khz = 3250,
+};
+
static struct dibx000_agc_config xc3028_agc_config = {
BAND_VHF | BAND_UHF, /* band_caps */
@@ -315,15 +379,28 @@ static struct zl10353_config dvico_fusionhdtv_xc3028 = {
.demod_address = 0x0f,
.if2 = 45600,
.no_tuner = 1,
+ .disable_i2c_gate_ctrl = 1,
+};
+
+static struct stv0900_reg stv0900_ts_regs[] = {
+ { R0900_TSGENERAL, 0x00 },
+ { R0900_P1_TSSPEED, 0x40 },
+ { R0900_P2_TSSPEED, 0x40 },
+ { R0900_P1_TSCFGM, 0xc0 },
+ { R0900_P2_TSCFGM, 0xc0 },
+ { R0900_P1_TSCFGH, 0xe0 },
+ { R0900_P2_TSCFGH, 0xe0 },
+ { R0900_P1_TSCFGL, 0x20 },
+ { R0900_P2_TSCFGL, 0x20 },
+ { 0xffff, 0xff }, /* terminate */
};
static struct stv0900_config netup_stv0900_config = {
.demod_address = 0x68,
- .xtal = 27000000,
+ .xtal = 8000000,
.clkmode = 3,/* 0-CLKI, 2-XTALI, else AUTO */
.diseqc_mode = 2,/* 2/3 PWM */
- .path1_mode = 2,/*Serial continues clock */
- .path2_mode = 2,/*Serial continues clock */
+ .ts_config_regs = stv0900_ts_regs,
.tun1_maddress = 0,/* 0x60 */
.tun2_maddress = 3,/* 0x63 */
.tun1_adc = 1,/* 1 Vpp */
@@ -332,14 +409,14 @@ static struct stv0900_config netup_stv0900_config = {
static struct stv6110_config netup_stv6110_tunerconfig_a = {
.i2c_address = 0x60,
- .mclk = 27000000,
- .iq_wiring = 0,
+ .mclk = 16000000,
+ .clk_div = 1,
};
static struct stv6110_config netup_stv6110_tunerconfig_b = {
.i2c_address = 0x63,
- .mclk = 27000000,
- .iq_wiring = 1,
+ .mclk = 16000000,
+ .clk_div = 1,
};
static int tbs_set_voltage(struct dvb_frontend *fe, fe_sec_voltage_t voltage)
@@ -368,10 +445,73 @@ static struct cx24116_config dvbworld_cx24116_config = {
.demod_address = 0x05,
};
+static struct lgs8gxx_config mygica_x8506_lgs8gl5_config = {
+ .prod = LGS8GXX_PROD_LGS8GL5,
+ .demod_address = 0x19,
+ .serial_ts = 0,
+ .ts_clk_pol = 1,
+ .ts_clk_gated = 1,
+ .if_clk_freq = 30400, /* 30.4 MHz */
+ .if_freq = 5380, /* 5.38 MHz */
+ .if_neg_center = 1,
+ .ext_adc = 0,
+ .adc_signed = 0,
+ .if_neg_edge = 0,
+};
+
+static struct xc5000_config mygica_x8506_xc5000_config = {
+ .i2c_address = 0x61,
+ .if_khz = 5380,
+};
+
+static int cx23885_dvb_set_frontend(struct dvb_frontend *fe,
+ struct dvb_frontend_parameters *param)
+{
+ struct cx23885_tsport *port = fe->dvb->priv;
+ struct cx23885_dev *dev = port->dev;
+
+ switch (dev->board) {
+ case CX23885_BOARD_HAUPPAUGE_HVR1275:
+ switch (param->u.vsb.modulation) {
+ case VSB_8:
+ cx23885_gpio_clear(dev, GPIO_5);
+ break;
+ case QAM_64:
+ case QAM_256:
+ default:
+ cx23885_gpio_set(dev, GPIO_5);
+ break;
+ }
+ break;
+ }
+ return (port->set_frontend_save) ?
+ port->set_frontend_save(fe, param) : -ENODEV;
+}
+
+static struct lgs8gxx_config magicpro_prohdtve2_lgs8g75_config = {
+ .prod = LGS8GXX_PROD_LGS8G75,
+ .demod_address = 0x19,
+ .serial_ts = 0,
+ .ts_clk_pol = 1,
+ .ts_clk_gated = 1,
+ .if_clk_freq = 30400, /* 30.4 MHz */
+ .if_freq = 6500, /* 6.50 MHz */
+ .if_neg_center = 1,
+ .ext_adc = 0,
+ .adc_signed = 1,
+ .adc_vpp = 2, /* 1.6 Vpp */
+ .if_neg_edge = 1,
+};
+
+static struct xc5000_config magicpro_prohdtve2_xc5000_config = {
+ .i2c_address = 0x61,
+ .if_khz = 6500,
+};
+
static int dvb_register(struct cx23885_tsport *port)
{
struct cx23885_dev *dev = port->dev;
- struct cx23885_i2c *i2c_bus = NULL;
+ struct cx23885_i2c *i2c_bus = NULL, *i2c_bus2 = NULL;
struct videobuf_dvb_frontend *fe0;
int ret;
@@ -396,6 +536,35 @@ static int dvb_register(struct cx23885_tsport *port)
&hauppauge_generic_tunerconfig, 0);
}
break;
+ case CX23885_BOARD_HAUPPAUGE_HVR1270:
+ case CX23885_BOARD_HAUPPAUGE_HVR1275:
+ i2c_bus = &dev->i2c_bus[0];
+ fe0->dvb.frontend = dvb_attach(lgdt3305_attach,
+ &hauppauge_lgdt3305_config,
+ &i2c_bus->i2c_adap);
+ if (fe0->dvb.frontend != NULL) {
+ dvb_attach(tda18271_attach, fe0->dvb.frontend,
+ 0x60, &dev->i2c_bus[1].i2c_adap,
+ &hauppauge_hvr127x_config);
+ }
+
+ /* FIXME: temporary hack */
+ /* define bridge override to set_frontend */
+ port->set_frontend_save = fe0->dvb.frontend->ops.set_frontend;
+ fe0->dvb.frontend->ops.set_frontend = cx23885_dvb_set_frontend;
+
+ break;
+ case CX23885_BOARD_HAUPPAUGE_HVR1255:
+ i2c_bus = &dev->i2c_bus[0];
+ fe0->dvb.frontend = dvb_attach(s5h1411_attach,
+ &hcw_s5h1411_config,
+ &i2c_bus->i2c_adap);
+ if (fe0->dvb.frontend != NULL) {
+ dvb_attach(tda18271_attach, fe0->dvb.frontend,
+ 0x60, &dev->i2c_bus[1].i2c_adap,
+ &hauppauge_tda18271_config);
+ }
+ break;
case CX23885_BOARD_HAUPPAUGE_HVR1800:
i2c_bus = &dev->i2c_bus[0];
switch (alt_tuner) {
@@ -472,7 +641,7 @@ static int dvb_register(struct cx23885_tsport *port)
static struct xc2028_ctrl ctl = {
.fname = XC2028_DEFAULT_FIRMWARE,
.max_len = 64,
- .scode_table = XC3028_FE_OREN538,
+ .demod = XC3028_FE_OREN538,
};
fe = dvb_attach(xc2028_attach,
@@ -496,6 +665,17 @@ static int dvb_register(struct cx23885_tsport *port)
&hauppauge_hvr1200_tuner_config);
}
break;
+ case CX23885_BOARD_HAUPPAUGE_HVR1210:
+ i2c_bus = &dev->i2c_bus[0];
+ fe0->dvb.frontend = dvb_attach(tda10048_attach,
+ &hauppauge_hvr1210_config,
+ &i2c_bus->i2c_adap);
+ if (fe0->dvb.frontend != NULL) {
+ dvb_attach(tda18271_attach, fe0->dvb.frontend,
+ 0x60, &dev->i2c_bus[1].i2c_adap,
+ &hauppauge_hvr1210_tuner_config);
+ }
+ break;
case CX23885_BOARD_HAUPPAUGE_HVR1400:
i2c_bus = &dev->i2c_bus[0];
fe0->dvb.frontend = dvb_attach(dib7000p_attach,
@@ -630,7 +810,8 @@ static int dvb_register(struct cx23885_tsport *port)
if (!dvb_attach(lnbh24_attach,
fe0->dvb.frontend,
&i2c_bus->i2c_adap,
- LNBH24_PCL, 0, 0x09))
+ LNBH24_PCL,
+ LNBH24_TTX, 0x09))
printk(KERN_ERR
"No LNBH24 found!\n");
@@ -650,7 +831,8 @@ static int dvb_register(struct cx23885_tsport *port)
if (!dvb_attach(lnbh24_attach,
fe0->dvb.frontend,
&i2c_bus->i2c_adap,
- LNBH24_PCL, 0, 0x0a))
+ LNBH24_PCL,
+ LNBH24_TTX, 0x0a))
printk(KERN_ERR
"No LNBH24 found!\n");
@@ -659,6 +841,43 @@ static int dvb_register(struct cx23885_tsport *port)
break;
}
break;
+ case CX23885_BOARD_MYGICA_X8506:
+ i2c_bus = &dev->i2c_bus[0];
+ i2c_bus2 = &dev->i2c_bus[1];
+ fe0->dvb.frontend = dvb_attach(lgs8gxx_attach,
+ &mygica_x8506_lgs8gl5_config,
+ &i2c_bus->i2c_adap);
+ if (fe0->dvb.frontend != NULL) {
+ dvb_attach(xc5000_attach,
+ fe0->dvb.frontend,
+ &i2c_bus2->i2c_adap,
+ &mygica_x8506_xc5000_config);
+ }
+ break;
+ case CX23885_BOARD_MAGICPRO_PROHDTVE2:
+ i2c_bus = &dev->i2c_bus[0];
+ i2c_bus2 = &dev->i2c_bus[1];
+ fe0->dvb.frontend = dvb_attach(lgs8gxx_attach,
+ &magicpro_prohdtve2_lgs8g75_config,
+ &i2c_bus->i2c_adap);
+ if (fe0->dvb.frontend != NULL) {
+ dvb_attach(xc5000_attach,
+ fe0->dvb.frontend,
+ &i2c_bus2->i2c_adap,
+ &magicpro_prohdtve2_xc5000_config);
+ }
+ break;
+ case CX23885_BOARD_HAUPPAUGE_HVR1850:
+ i2c_bus = &dev->i2c_bus[0];
+ fe0->dvb.frontend = dvb_attach(s5h1411_attach,
+ &hcw_s5h1411_config,
+ &i2c_bus->i2c_adap);
+ if (fe0->dvb.frontend != NULL)
+ dvb_attach(tda18271_attach, fe0->dvb.frontend,
+ 0x60, &dev->i2c_bus[0].i2c_adap,
+ &hauppauge_tda18271_config);
+ break;
+
default:
printk(KERN_INFO "%s: The frontend of your DVB/ATSC card "
" isn't supported yet\n",
@@ -674,7 +893,7 @@ static int dvb_register(struct cx23885_tsport *port)
fe0->dvb.frontend->callback = cx23885_tuner_callback;
/* Put the analog decoder in standby to keep it quiet */
- cx23885_call_i2c_clients(i2c_bus, TUNER_SET_STANDBY, NULL);
+ call_all(dev, tuner, s_standby);
if (fe0->dvb.frontend->ops.analog_ops.standby)
fe0->dvb.frontend->ops.analog_ops.standby(fe0->dvb.frontend);
@@ -779,7 +998,11 @@ int cx23885_dvb_unregister(struct cx23885_tsport *port)
if (fe0->dvb.frontend)
videobuf_dvb_unregister_bus(&port->frontends);
- netup_ci_exit(port);
+ switch (port->dev->board) {
+ case CX23885_BOARD_NETUP_DUAL_DVBS2_CI:
+ netup_ci_exit(port);
+ break;
+ }
return 0;
}
generated by cgit v1.2.3 (git 2.25.1) at 2025-01-05 04:04:36 +0000