summaryrefslogtreecommitdiff
path: root/linux/drivers/media/video/em28xx/em28xx-cards.c
diff options
context:
space:
mode:
Diffstat (limited to 'linux/drivers/media/video/em28xx/em28xx-cards.c')
-rw-r--r--linux/drivers/media/video/em28xx/em28xx-cards.c804
1 files changed, 702 insertions, 102 deletions
diff --git a/linux/drivers/media/video/em28xx/em28xx-cards.c b/linux/drivers/media/video/em28xx/em28xx-cards.c
index fcb8131e6..07644ec5e 100644
--- a/linux/drivers/media/video/em28xx/em28xx-cards.c
+++ b/linux/drivers/media/video/em28xx/em28xx-cards.c
@@ -32,6 +32,8 @@
#include <media/msp3400.h>
#include <media/saa7115.h>
#include <media/tvp5150.h>
+#include <media/tvaudio.h>
+#include <media/i2c-addr.h>
#include <media/tveeprom.h>
#include <media/v4l2-common.h>
#include <media/v4l2-chip-ident.h>
@@ -48,6 +50,11 @@ static unsigned int disable_ir;
module_param(disable_ir, int, 0444);
MODULE_PARM_DESC(disable_ir, "disable infrared remote support");
+static unsigned int disable_usb_speed_check;
+module_param(disable_usb_speed_check, int, 0444);
+MODULE_PARM_DESC(disable_usb_speed_check,
+ "override min bandwidth requirement of 480M bps");
+
static unsigned int card[] = {[0 ... (EM28XX_MAXBOARDS - 1)] = UNSET };
module_param_array(card, int, NULL, 0444);
MODULE_PARM_DESC(card, "card type");
@@ -115,6 +122,24 @@ static struct em28xx_reg_seq em2870_kworld_355u_digital[] = {
};
#endif
+/* Board - EM2882 Kworld 315U digital */
+static struct em28xx_reg_seq em2882_kworld_315u_digital[] = {
+ {EM28XX_R08_GPIO, 0xff, 0xff, 10},
+ {EM28XX_R08_GPIO, 0xfe, 0xff, 10},
+ {EM2880_R04_GPO, 0x04, 0xff, 10},
+ {EM2880_R04_GPO, 0x0c, 0xff, 10},
+ {EM28XX_R08_GPIO, 0x7e, 0xff, 10},
+ { -1, -1, -1, -1},
+};
+
+static struct em28xx_reg_seq em2882_kworld_315u_tuner_gpio[] = {
+ {EM2880_R04_GPO, 0x08, 0xff, 10},
+ {EM2880_R04_GPO, 0x0c, 0xff, 10},
+ {EM2880_R04_GPO, 0x08, 0xff, 10},
+ {EM2880_R04_GPO, 0x0c, 0xff, 10},
+ { -1, -1, -1, -1},
+};
+
static struct em28xx_reg_seq kworld_330u_analog[] = {
{EM28XX_R08_GPIO, 0x6d, ~EM_GPIO_4, 10},
{EM2880_R04_GPO, 0x00, 0xff, 10},
@@ -127,6 +152,38 @@ static struct em28xx_reg_seq kworld_330u_digital[] = {
{ -1, -1, -1, -1},
};
+/* Evga inDtube
+ GPIO0 - Enable digital power (s5h1409) - low to enable
+ GPIO1 - Enable analog power (tvp5150/emp202) - low to enable
+ GPIO4 - xc3028 reset
+ GOP3 - s5h1409 reset
+ */
+static struct em28xx_reg_seq evga_indtube_analog[] = {
+ {EM28XX_R08_GPIO, 0x79, 0xff, 60},
+ { -1, -1, -1, -1},
+};
+
+static struct em28xx_reg_seq evga_indtube_digital[] = {
+ {EM28XX_R08_GPIO, 0x7a, 0xff, 1},
+ {EM2880_R04_GPO, 0x04, 0xff, 10},
+ {EM2880_R04_GPO, 0x0c, 0xff, 1},
+ { -1, -1, -1, -1},
+};
+
+/* Pinnacle Hybrid Pro eb1a:2881 */
+static struct em28xx_reg_seq pinnacle_hybrid_pro_analog[] = {
+ {EM28XX_R08_GPIO, 0xfd, ~EM_GPIO_4, 10},
+ { -1, -1, -1, -1},
+};
+
+static struct em28xx_reg_seq pinnacle_hybrid_pro_digital[] = {
+ {EM28XX_R08_GPIO, 0x6e, ~EM_GPIO_4, 10},
+ {EM2880_R04_GPO, 0x04, 0xff, 100},/* zl10353 reset */
+ {EM2880_R04_GPO, 0x0c, 0xff, 1},
+ { -1, -1, -1, -1},
+};
+
+
/* Callback for the most boards */
static struct em28xx_reg_seq default_tuner_gpio[] = {
{EM28XX_R08_GPIO, EM_GPIO_4, EM_GPIO_4, 10},
@@ -151,18 +208,38 @@ static struct em28xx_reg_seq compro_mute_gpio[] = {
{ -1, -1, -1, -1},
};
+/* Terratec AV350 */
+static struct em28xx_reg_seq terratec_av350_mute_gpio[] = {
+ {EM28XX_R08_GPIO, 0xff, 0x7f, 10},
+ { -1, -1, -1, -1},
+};
+
+static struct em28xx_reg_seq terratec_av350_unmute_gpio[] = {
+ {EM28XX_R08_GPIO, 0xff, 0xff, 10},
+ { -1, -1, -1, -1},
+};
+
+static struct em28xx_reg_seq silvercrest_reg_seq[] = {
+ {EM28XX_R08_GPIO, 0xff, 0xff, 10},
+ {EM28XX_R08_GPIO, 0x01, 0xf7, 10},
+ { -1, -1, -1, -1},
+};
+
/*
* Board definitions
*/
struct em28xx_board em28xx_boards[] = {
[EM2750_BOARD_UNKNOWN] = {
- .name = "Unknown EM2750/EM2751 webcam grabber",
- .xclk = EM28XX_XCLK_FREQUENCY_48MHZ,
- .tuner_type = TUNER_ABSENT, /* This is a webcam */
+ .name = "EM2710/EM2750/EM2751 webcam grabber",
+ .xclk = EM28XX_XCLK_FREQUENCY_20MHZ,
+ .tuner_type = TUNER_ABSENT,
+ .is_webcam = 1,
+ .no_audio = 1,
.input = { {
.type = EM28XX_VMUX_COMPOSITE1,
.vmux = 0,
.amux = EM28XX_AMUX_VIDEO,
+ .gpio = silvercrest_reg_seq,
} },
},
[EM2800_BOARD_UNKNOWN] = {
@@ -184,13 +261,16 @@ struct em28xx_board em28xx_boards[] = {
[EM2820_BOARD_UNKNOWN] = {
.name = "Unknown EM2750/28xx video grabber",
.tuner_type = TUNER_ABSENT,
+ .is_webcam = 1, /* To enable sensor probe */
+ .no_audio = 1,
},
[EM2750_BOARD_DLCW_130] = {
/* Beijing Huaqi Information Digital Technology Co., Ltd */
.name = "Huaqi DLCW-130",
.valid = EM28XX_BOARD_NOT_VALIDATED,
.xclk = EM28XX_XCLK_FREQUENCY_48MHZ,
- .tuner_type = TUNER_ABSENT, /* This is a webcam */
+ .tuner_type = TUNER_ABSENT,
+ .is_webcam = 1,
.input = { {
.type = EM28XX_VMUX_COMPOSITE1,
.vmux = 0,
@@ -391,13 +471,26 @@ struct em28xx_board em28xx_boards[] = {
[EM2820_BOARD_VIDEOLOGY_20K14XUSB] = {
.name = "Videology 20K14XUSB USB2.0",
.valid = EM28XX_BOARD_NOT_VALIDATED,
- .tuner_type = TUNER_ABSENT, /* This is a webcam */
+ .tuner_type = TUNER_ABSENT,
+ .is_webcam = 1,
.input = { {
.type = EM28XX_VMUX_COMPOSITE1,
.vmux = 0,
.amux = EM28XX_AMUX_VIDEO,
} },
},
+ [EM2820_BOARD_SILVERCREST_WEBCAM] = {
+ .name = "Silvercrest Webcam 1.3mpix",
+ .tuner_type = TUNER_ABSENT,
+ .is_webcam = 1,
+ .no_audio = 1,
+ .input = { {
+ .type = EM28XX_VMUX_COMPOSITE1,
+ .vmux = 0,
+ .amux = EM28XX_AMUX_VIDEO,
+ .gpio = silvercrest_reg_seq,
+ } },
+ },
[EM2821_BOARD_SUPERCOMP_USB_2] = {
.name = "Supercomp USB 2.0 TV",
.valid = EM28XX_BOARD_NOT_VALIDATED,
@@ -439,7 +532,8 @@ struct em28xx_board em28xx_boards[] = {
/* Beijing Huaqi Information Digital Technology Co., Ltd */
.name = "NetGMBH Cam",
.valid = EM28XX_BOARD_NOT_VALIDATED,
- .tuner_type = TUNER_ABSENT, /* This is a webcam */
+ .tuner_type = TUNER_ABSENT,
+ .is_webcam = 1,
.input = { {
.type = EM28XX_VMUX_COMPOSITE1,
.vmux = 0,
@@ -548,22 +642,27 @@ struct em28xx_board em28xx_boards[] = {
},
[EM2861_BOARD_PLEXTOR_PX_TV100U] = {
.name = "Plextor ConvertX PX-TV100U",
- .valid = EM28XX_BOARD_NOT_VALIDATED,
.tuner_type = TUNER_TNF_5335MF,
+ .xclk = EM28XX_XCLK_I2S_MSB_TIMING |
+ EM28XX_XCLK_FREQUENCY_12MHZ,
.tda9887_conf = TDA9887_PRESENT,
.decoder = EM28XX_TVP5150,
+ .has_msp34xx = 1,
.input = { {
.type = EM28XX_VMUX_TELEVISION,
.vmux = TVP5150_COMPOSITE0,
.amux = EM28XX_AMUX_LINE_IN,
+ .gpio = pinnacle_hybrid_pro_analog,
}, {
.type = EM28XX_VMUX_COMPOSITE1,
.vmux = TVP5150_COMPOSITE1,
.amux = EM28XX_AMUX_LINE_IN,
+ .gpio = pinnacle_hybrid_pro_analog,
}, {
.type = EM28XX_VMUX_SVIDEO,
.vmux = TVP5150_SVIDEO,
.amux = EM28XX_AMUX_LINE_IN,
+ .gpio = pinnacle_hybrid_pro_analog,
} },
},
@@ -652,6 +751,7 @@ struct em28xx_board em28xx_boards[] = {
.mts_firmware = 1,
.has_dvb = 1,
.dvb_gpio = hauppauge_wintv_hvr_900_digital,
+ .ir_codes = ir_codes_hauppauge_new,
.decoder = EM28XX_TVP5150,
.input = { {
.type = EM28XX_VMUX_TELEVISION,
@@ -676,6 +776,7 @@ struct em28xx_board em28xx_boards[] = {
.tuner_type = TUNER_XC2028,
.tuner_gpio = default_tuner_gpio,
.mts_firmware = 1,
+ .ir_codes = ir_codes_hauppauge_new,
.decoder = EM28XX_TVP5150,
#if 0 /* FIXME: add an entry at em28xx-dvb */
.has_dvb = 1,
@@ -808,7 +909,9 @@ struct em28xx_board em28xx_boards[] = {
.tuner_gpio = default_tuner_gpio,
.decoder = EM28XX_TVP5150,
.has_dvb = 1,
- .dvb_gpio = default_analog,
+ .dvb_gpio = default_digital,
+ .ir_codes = ir_codes_terratec_cinergy_xs,
+ .xclk = EM28XX_XCLK_FREQUENCY_12MHZ, /* NEC IR */
.input = { {
.type = EM28XX_VMUX_TELEVISION,
.vmux = TVP5150_COMPOSITE0,
@@ -1029,16 +1132,17 @@ struct em28xx_board em28xx_boards[] = {
.amux = EM28XX_AMUX_LINE_IN,
} },
},
- [EM2860_BOARD_POINTNIX_INTRAORAL_CAMERA] = {
- .name = "PointNix Intra-Oral Camera",
+ [EM2860_BOARD_SAA711X_REFERENCE_DESIGN] = {
+ .name = "EM2860/SAA711X Reference Design",
.has_snapshot_button = 1,
- .tda9887_conf = TDA9887_PRESENT,
.tuner_type = TUNER_ABSENT,
.decoder = EM28XX_SAA711X,
.input = { {
.type = EM28XX_VMUX_SVIDEO,
.vmux = SAA7115_SVIDEO3,
- .amux = EM28XX_AMUX_VIDEO,
+ }, {
+ .type = EM28XX_VMUX_COMPOSITE1,
+ .vmux = SAA7115_COMPOSITE0,
} },
},
[EM2880_BOARD_MSI_DIGIVOX_AD] = {
@@ -1140,6 +1244,63 @@ struct em28xx_board em28xx_boards[] = {
.gpio = default_analog,
} },
},
+ [EM2882_BOARD_KWORLD_ATSC_315U] = {
+ .name = "KWorld ATSC 315U HDTV TV Box",
+ .valid = EM28XX_BOARD_NOT_VALIDATED,
+ .tuner_type = TUNER_THOMSON_DTT761X,
+ .tuner_gpio = em2882_kworld_315u_tuner_gpio,
+ .tda9887_conf = TDA9887_PRESENT,
+ .decoder = EM28XX_SAA711X,
+ .has_dvb = 1,
+ .dvb_gpio = em2882_kworld_315u_digital,
+ .xclk = EM28XX_XCLK_FREQUENCY_12MHZ,
+ .i2c_speed = EM28XX_I2C_CLK_WAIT_ENABLE,
+ /* Analog mode - still not ready */
+ /*.input = { {
+ .type = EM28XX_VMUX_TELEVISION,
+ .vmux = SAA7115_COMPOSITE2,
+ .amux = EM28XX_AMUX_VIDEO,
+ .gpio = em2882_kworld_315u_analog,
+ .aout = EM28XX_AOUT_PCM_IN | EM28XX_AOUT_PCM_STEREO,
+ }, {
+ .type = EM28XX_VMUX_COMPOSITE1,
+ .vmux = SAA7115_COMPOSITE0,
+ .amux = EM28XX_AMUX_LINE_IN,
+ .gpio = em2882_kworld_315u_analog1,
+ .aout = EM28XX_AOUT_PCM_IN | EM28XX_AOUT_PCM_STEREO,
+ }, {
+ .type = EM28XX_VMUX_SVIDEO,
+ .vmux = SAA7115_SVIDEO3,
+ .amux = EM28XX_AMUX_LINE_IN,
+ .gpio = em2882_kworld_315u_analog1,
+ .aout = EM28XX_AOUT_PCM_IN | EM28XX_AOUT_PCM_STEREO,
+ } }, */
+ },
+ [EM2880_BOARD_EMPIRE_DUAL_TV] = {
+ .name = "Empire dual TV",
+ .tuner_type = TUNER_XC2028,
+ .tuner_gpio = default_tuner_gpio,
+ .has_dvb = 1,
+ .dvb_gpio = default_digital,
+ .mts_firmware = 1,
+ .decoder = EM28XX_TVP5150,
+ .input = { {
+ .type = EM28XX_VMUX_TELEVISION,
+ .vmux = TVP5150_COMPOSITE0,
+ .amux = EM28XX_AMUX_VIDEO,
+ .gpio = default_analog,
+ }, {
+ .type = EM28XX_VMUX_COMPOSITE1,
+ .vmux = TVP5150_COMPOSITE1,
+ .amux = EM28XX_AMUX_LINE_IN,
+ .gpio = default_analog,
+ }, {
+ .type = EM28XX_VMUX_SVIDEO,
+ .vmux = TVP5150_SVIDEO,
+ .amux = EM28XX_AMUX_LINE_IN,
+ .gpio = default_analog,
+ } },
+ },
[EM2881_BOARD_DNT_DA2_HYBRID] = {
.name = "DNT DA2 Hybrid",
.valid = EM28XX_BOARD_NOT_VALIDATED,
@@ -1169,29 +1330,26 @@ struct em28xx_board em28xx_boards[] = {
},
[EM2881_BOARD_PINNACLE_HYBRID_PRO] = {
.name = "Pinnacle Hybrid Pro",
- .valid = EM28XX_BOARD_NOT_VALIDATED,
.tuner_type = TUNER_XC2028,
.tuner_gpio = default_tuner_gpio,
.decoder = EM28XX_TVP5150,
-#if 0 /* FIXME: add an entry at em28xx-dvb */
.has_dvb = 1,
- .dvb_gpio = default_digital,
-#endif
+ .dvb_gpio = pinnacle_hybrid_pro_digital,
.input = { {
.type = EM28XX_VMUX_TELEVISION,
.vmux = TVP5150_COMPOSITE0,
.amux = EM28XX_AMUX_VIDEO,
- .gpio = default_analog,
+ .gpio = pinnacle_hybrid_pro_analog,
}, {
.type = EM28XX_VMUX_COMPOSITE1,
.vmux = TVP5150_COMPOSITE1,
.amux = EM28XX_AMUX_LINE_IN,
- .gpio = default_analog,
+ .gpio = pinnacle_hybrid_pro_analog,
}, {
.type = EM28XX_VMUX_SVIDEO,
.vmux = TVP5150_SVIDEO,
.amux = EM28XX_AMUX_LINE_IN,
- .gpio = default_analog,
+ .gpio = pinnacle_hybrid_pro_analog,
} },
},
[EM2882_BOARD_PINNACLE_HYBRID_PRO] = {
@@ -1303,6 +1461,7 @@ struct em28xx_board em28xx_boards[] = {
[EM2820_BOARD_COMPRO_VIDEOMATE_FORYOU] = {
.name = "Compro VideoMate ForYou/Stereo",
.tuner_type = TUNER_LG_PAL_NEW_TAPC,
+ .tvaudio_addr = 0xb0,
.tda9887_conf = TDA9887_PRESENT,
.decoder = EM28XX_TVP5150,
.adecoder = EM28XX_TVAUDIO,
@@ -1382,6 +1541,69 @@ struct em28xx_board em28xx_boards[] = {
.amux = EM28XX_AMUX_VIDEO,
} },
},
+ [EM2860_BOARD_TERRATEC_GRABBY] = {
+ .name = "Terratec Grabby",
+ .vchannels = 2,
+ .tuner_type = TUNER_ABSENT,
+ .decoder = EM28XX_SAA711X,
+ .xclk = EM28XX_XCLK_FREQUENCY_12MHZ,
+ .input = { {
+ .type = EM28XX_VMUX_COMPOSITE1,
+ .vmux = SAA7115_COMPOSITE0,
+ .amux = EM28XX_AMUX_VIDEO2,
+ }, {
+ .type = EM28XX_VMUX_SVIDEO,
+ .vmux = SAA7115_SVIDEO3,
+ .amux = EM28XX_AMUX_VIDEO2,
+ } },
+ },
+ [EM2860_BOARD_TERRATEC_AV350] = {
+ .name = "Terratec AV350",
+ .vchannels = 2,
+ .tuner_type = TUNER_ABSENT,
+ .decoder = EM28XX_TVP5150,
+ .xclk = EM28XX_XCLK_FREQUENCY_12MHZ,
+ .mute_gpio = terratec_av350_mute_gpio,
+ .input = { {
+ .type = EM28XX_VMUX_COMPOSITE1,
+ .vmux = TVP5150_COMPOSITE1,
+ .amux = EM28XX_AUDIO_SRC_LINE,
+ .gpio = terratec_av350_unmute_gpio,
+
+ }, {
+ .type = EM28XX_VMUX_SVIDEO,
+ .vmux = TVP5150_SVIDEO,
+ .amux = EM28XX_AUDIO_SRC_LINE,
+ .gpio = terratec_av350_unmute_gpio,
+ } },
+ },
+ [EM2882_BOARD_EVGA_INDTUBE] = {
+ .name = "Evga inDtube",
+ .tuner_type = TUNER_XC2028,
+ .tuner_gpio = default_tuner_gpio,
+ .decoder = EM28XX_TVP5150,
+ .xclk = EM28XX_XCLK_FREQUENCY_12MHZ, /* NEC IR */
+ .mts_firmware = 1,
+ .has_dvb = 1,
+ .dvb_gpio = evga_indtube_digital,
+ .ir_codes = ir_codes_evga_indtube,
+ .input = { {
+ .type = EM28XX_VMUX_TELEVISION,
+ .vmux = TVP5150_COMPOSITE0,
+ .amux = EM28XX_AMUX_VIDEO,
+ .gpio = evga_indtube_analog,
+ }, {
+ .type = EM28XX_VMUX_COMPOSITE1,
+ .vmux = TVP5150_COMPOSITE1,
+ .amux = EM28XX_AMUX_LINE_IN,
+ .gpio = evga_indtube_analog,
+ }, {
+ .type = EM28XX_VMUX_SVIDEO,
+ .vmux = TVP5150_SVIDEO,
+ .amux = EM28XX_AMUX_LINE_IN,
+ .gpio = evga_indtube_analog,
+ } },
+ },
};
const unsigned int em28xx_bcount = ARRAY_SIZE(em28xx_boards);
@@ -1393,6 +1615,8 @@ struct usb_device_id em28xx_id_table[] = {
.driver_info = EM2750_BOARD_UNKNOWN },
{ USB_DEVICE(0xeb1a, 0x2800),
.driver_info = EM2800_BOARD_UNKNOWN },
+ { USB_DEVICE(0xeb1a, 0x2710),
+ .driver_info = EM2820_BOARD_UNKNOWN },
{ USB_DEVICE(0xeb1a, 0x2820),
.driver_info = EM2820_BOARD_UNKNOWN },
{ USB_DEVICE(0xeb1a, 0x2821),
@@ -1419,6 +1643,8 @@ struct usb_device_id em28xx_id_table[] = {
{ USB_DEVICE(0xeb1a, 0xe310),
.driver_info = EM2880_BOARD_KWORLD_DVB_310U },
#endif
+ { USB_DEVICE(0xeb1a, 0xa313),
+ .driver_info = EM2882_BOARD_KWORLD_ATSC_315U },
{ USB_DEVICE(0xeb1a, 0xa316),
.driver_info = EM2883_BOARD_KWORLD_HYBRID_330U },
{ USB_DEVICE(0xeb1a, 0xe320),
@@ -1449,6 +1675,10 @@ struct usb_device_id em28xx_id_table[] = {
.driver_info = EM2870_BOARD_TERRATEC_XS },
{ USB_DEVICE(0x0ccd, 0x0047),
.driver_info = EM2880_BOARD_TERRATEC_PRODIGY_XS },
+ { USB_DEVICE(0x0ccd, 0x0084),
+ .driver_info = EM2860_BOARD_TERRATEC_AV350 },
+ { USB_DEVICE(0x0ccd, 0x0096),
+ .driver_info = EM2860_BOARD_TERRATEC_GRABBY },
{ USB_DEVICE(0x185b, 0x2870),
.driver_info = EM2870_BOARD_COMPRO_VIDEOMATE },
{ USB_DEVICE(0x185b, 0x2041),
@@ -1489,6 +1719,8 @@ struct usb_device_id em28xx_id_table[] = {
.driver_info = EM2861_BOARD_PLEXTOR_PX_TV100U },
{ USB_DEVICE(0x04bb, 0x0515),
.driver_info = EM2820_BOARD_IODATA_GVMVP_SZ },
+ { USB_DEVICE(0xeb1a, 0x50a6),
+ .driver_info = EM2860_BOARD_GADMEI_UTV330 },
{ },
};
MODULE_DEVICE_TABLE(usb, em28xx_id_table);
@@ -1501,16 +1733,42 @@ static struct em28xx_hash_table em28xx_eeprom_hash[] = {
{0x6ce05a8f, EM2820_BOARD_PROLINK_PLAYTV_USB2, TUNER_YMEC_TVF_5533MF},
{0x72cc5a8b, EM2820_BOARD_PROLINK_PLAYTV_BOX4_USB2, TUNER_YMEC_TVF_5533MF},
{0x966a0441, EM2880_BOARD_KWORLD_DVB_310U, TUNER_XC2028},
+ {0x166a0441, EM2880_BOARD_EMPIRE_DUAL_TV, TUNER_XC2028},
+ {0xcee44a99, EM2882_BOARD_EVGA_INDTUBE, TUNER_XC2028},
+ {0xb8846b20, EM2881_BOARD_PINNACLE_HYBRID_PRO, TUNER_XC2028},
};
/* I2C devicelist hash table for devices with generic USB IDs */
static struct em28xx_hash_table em28xx_i2c_hash[] = {
{0xb06a32c3, EM2800_BOARD_TERRATEC_CINERGY_200, TUNER_LG_PAL_NEW_TAPC},
{0xf51200e3, EM2800_BOARD_VGEAR_POCKETTV, TUNER_LG_PAL_NEW_TAPC},
- {0x1ba50080, EM2860_BOARD_POINTNIX_INTRAORAL_CAMERA, TUNER_ABSENT},
+ {0x1ba50080, EM2860_BOARD_SAA711X_REFERENCE_DESIGN, TUNER_ABSENT},
{0xc51200e3, EM2820_BOARD_GADMEI_TVR200, TUNER_LG_PAL_NEW_TAPC},
};
+/* I2C possible address to saa7115, tvp5150, msp3400, tvaudio */
+static unsigned short saa711x_addrs[] = {
+ 0x4a >> 1, 0x48 >> 1, /* SAA7111, SAA7111A and SAA7113 */
+ 0x42 >> 1, 0x40 >> 1, /* SAA7114, SAA7115 and SAA7118 */
+ I2C_CLIENT_END };
+
+static unsigned short tvp5150_addrs[] = {
+ 0xb8 >> 1,
+ 0xba >> 1,
+ I2C_CLIENT_END
+};
+
+static unsigned short mt9v011_addrs[] = {
+ 0xba >> 1,
+ I2C_CLIENT_END
+};
+
+static unsigned short msp3400_addrs[] = {
+ 0x80 >> 1,
+ 0x88 >> 1,
+ I2C_CLIENT_END
+};
+
int em28xx_tuner_callback(void *ptr, int component, int command, int arg)
{
int rc = 0;
@@ -1544,65 +1802,154 @@ static inline void em28xx_set_model(struct em28xx *dev)
EM28XX_I2C_FREQ_100_KHZ;
}
-/* Since em28xx_pre_card_setup() requires a proper dev->model,
- * this won't work for boards with generic PCI IDs
+
+/* FIXME: Should be replaced by a proper mt9m111 driver */
+static int em28xx_initialize_mt9m111(struct em28xx *dev)
+{
+ int i;
+ unsigned char regs[][3] = {
+ { 0x0d, 0x00, 0x01, }, /* reset and use defaults */
+ { 0x0d, 0x00, 0x00, },
+ { 0x0a, 0x00, 0x21, },
+ { 0x21, 0x04, 0x00, }, /* full readout speed, no row/col skipping */
+ };
+
+ for (i = 0; i < ARRAY_SIZE(regs); i++)
+ i2c_master_send(&dev->i2c_client, &regs[i][0], 3);
+
+ return 0;
+}
+
+
+/* FIXME: Should be replaced by a proper mt9m001 driver */
+static int em28xx_initialize_mt9m001(struct em28xx *dev)
+{
+ int i;
+ unsigned char regs[][3] = {
+ { 0x0d, 0x00, 0x01, },
+ { 0x0d, 0x00, 0x00, },
+ { 0x04, 0x05, 0x00, }, /* hres = 1280 */
+ { 0x03, 0x04, 0x00, }, /* vres = 1024 */
+ { 0x20, 0x11, 0x00, },
+ { 0x06, 0x00, 0x10, },
+ { 0x2b, 0x00, 0x24, },
+ { 0x2e, 0x00, 0x24, },
+ { 0x35, 0x00, 0x24, },
+ { 0x2d, 0x00, 0x20, },
+ { 0x2c, 0x00, 0x20, },
+ { 0x09, 0x0a, 0xd4, },
+ { 0x35, 0x00, 0x57, },
+ };
+
+ for (i = 0; i < ARRAY_SIZE(regs); i++)
+ i2c_master_send(&dev->i2c_client, &regs[i][0], 3);
+
+ return 0;
+}
+
+/* HINT method: webcam I2C chips
+ *
+ * This method works for webcams with Micron sensors
*/
-void em28xx_pre_card_setup(struct em28xx *dev)
+static int em28xx_hint_sensor(struct em28xx *dev)
{
int rc;
+ char *sensor_name;
+ unsigned char cmd;
+ __be16 version_be;
+ u16 version;
+
+ /* Micron sensor detection */
+ dev->i2c_client.addr = 0xba >> 1;
+ cmd = 0;
+ i2c_master_send(&dev->i2c_client, &cmd, 1);
+ rc = i2c_master_recv(&dev->i2c_client, (char *)&version_be, 2);
+ if (rc != 2)
+ return -EINVAL;
+
+ version = be16_to_cpu(version_be);
+ switch (version) {
+ case 0x8232: /* mt9v011 640x480 1.3 Mpix sensor */
+ case 0x8243: /* mt9v011 rev B 640x480 1.3 Mpix sensor */
+ dev->model = EM2820_BOARD_SILVERCREST_WEBCAM;
+ em28xx_set_model(dev);
+
+ sensor_name = "mt9v011";
+ dev->em28xx_sensor = EM28XX_MT9V011;
+ dev->sensor_xres = 640;
+ dev->sensor_yres = 480;
+ /*
+ * FIXME: mt9v011 uses I2S speed as xtal clk - at least with
+ * the Silvercrest cam I have here for testing - for higher
+ * resolutions, a high clock cause horizontal artifacts, so we
+ * need to use a lower xclk frequency.
+ * Yet, it would be possible to adjust xclk depending on the
+ * desired resolution, since this affects directly the
+ * frame rate.
+ */
+ dev->board.xclk = EM28XX_XCLK_FREQUENCY_4_3MHZ;
+ dev->sensor_xtal = 4300000;
- em28xx_set_model(dev);
+ /* probably means GRGB 16 bit bayer */
+ dev->vinmode = 0x0d;
+ dev->vinctl = 0x00;
- em28xx_info("Identified as %s (card=%d)\n",
- dev->board.name, dev->model);
+ break;
- /* Set the default GPO/GPIO for legacy devices */
- dev->reg_gpo_num = EM2880_R04_GPO;
- dev->reg_gpio_num = EM28XX_R08_GPIO;
+ case 0x143a: /* MT9M111 as found in the ECS G200 */
+ dev->model = EM2750_BOARD_UNKNOWN;
+ em28xx_set_model(dev);
- dev->wait_after_write = 5;
+ sensor_name = "mt9m111";
+ dev->board.xclk = EM28XX_XCLK_FREQUENCY_48MHZ;
+ dev->em28xx_sensor = EM28XX_MT9M111;
+ em28xx_initialize_mt9m111(dev);
+ dev->sensor_xres = 640;
+ dev->sensor_yres = 512;
- /* Based on the Chip ID, set the device configuration */
- rc = em28xx_read_reg(dev, EM28XX_R0A_CHIPID);
- if (rc > 0) {
- dev->chip_id = rc;
+ dev->vinmode = 0x0a;
+ dev->vinctl = 0x00;
- switch (dev->chip_id) {
- case CHIP_ID_EM2750:
- em28xx_info("chip ID is em2750\n");
- break;
- case CHIP_ID_EM2820:
- em28xx_info("chip ID is em2820\n");
- break;
- case CHIP_ID_EM2840:
- em28xx_info("chip ID is em2840\n");
- break;
- case CHIP_ID_EM2860:
- em28xx_info("chip ID is em2860\n");
- break;
- case CHIP_ID_EM2870:
- em28xx_info("chip ID is em2870\n");
- dev->wait_after_write = 0;
- break;
- case CHIP_ID_EM2874:
- em28xx_info("chip ID is em2874\n");
- dev->reg_gpio_num = EM2874_R80_GPIO;
- dev->wait_after_write = 0;
- break;
- case CHIP_ID_EM2883:
- em28xx_info("chip ID is em2882/em2883\n");
- dev->wait_after_write = 0;
- break;
- default:
- em28xx_info("em28xx chip ID = %d\n", dev->chip_id);
- }
+ break;
+
+#if 0
+ case 0x8411:
+ case 0x8421:
+#endif
+ case 0x8431:
+ dev->model = EM2750_BOARD_UNKNOWN;
+ em28xx_set_model(dev);
+
+ sensor_name = "mt9m001";
+ dev->em28xx_sensor = EM28XX_MT9M001;
+ em28xx_initialize_mt9m001(dev);
+ dev->sensor_xres = 1280;
+ dev->sensor_yres = 1024;
+
+ /* probably means BGGR 16 bit bayer */
+ dev->vinmode = 0x0c;
+ dev->vinctl = 0x00;
+
+ break;
+ default:
+ printk("Unknown Micron Sensor 0x%04x\n", version);
+ return -EINVAL;
}
- /* Prepopulate cached GPO register content */
- rc = em28xx_read_reg(dev, dev->reg_gpo_num);
- if (rc >= 0)
- dev->reg_gpo = rc;
+ /* Setup webcam defaults */
+ em28xx_pre_card_setup(dev);
+
+ em28xx_errdev("Sensor is %s, using model %s entry.\n",
+ sensor_name, em28xx_boards[dev->model].name);
+
+ return 0;
+}
+/* Since em28xx_pre_card_setup() requires a proper dev->model,
+ * this won't work for boards with generic PCI IDs
+ */
+void em28xx_pre_card_setup(struct em28xx *dev)
+{
/* Set the initial XCLK and I2C clock values based on the board
definition */
em28xx_write_reg(dev, EM28XX_R0F_XCLK, dev->board.xclk & 0x7f);
@@ -1612,9 +1959,8 @@ void em28xx_pre_card_setup(struct em28xx *dev)
/* request some modules */
switch (dev->model) {
case EM2861_BOARD_PLEXTOR_PX_TV100U:
- /* FIXME guess */
- /* Turn on analog audio output */
- em28xx_write_reg(dev, EM28XX_R08_GPIO, 0xfd);
+ /* Sets the msp34xx I2S speed */
+ dev->i2s_speed = 2048000;
break;
case EM2861_BOARD_KWORLD_PVRTV_300U:
case EM2880_BOARD_KWORLD_DVB_305U:
@@ -1665,6 +2011,17 @@ void em28xx_pre_card_setup(struct em28xx *dev)
em28xx_write_reg(dev, EM28XX_R08_GPIO, 0xfd);
break;
+ case EM2882_BOARD_KWORLD_ATSC_315U:
+ em28xx_write_reg(dev, EM28XX_R08_GPIO, 0xff);
+ msleep(10);
+ em28xx_write_reg(dev, EM28XX_R08_GPIO, 0xfe);
+ msleep(10);
+ em28xx_write_reg(dev, EM2880_R04_GPO, 0x00);
+ msleep(10);
+ em28xx_write_reg(dev, EM2880_R04_GPO, 0x08);
+ msleep(10);
+ break;
+
case EM2860_BOARD_KAIOMY_TVNPC_U2:
em28xx_write_regs(dev, EM28XX_R0F_XCLK, "\x07", 1);
em28xx_write_regs(dev, EM28XX_R06_I2C_CLK, "\x40", 1);
@@ -1710,10 +2067,12 @@ static void em28xx_setup_xc3028(struct em28xx *dev, struct xc2028_ctrl *ctl)
ctl->mts = em28xx_boards[dev->model].mts_firmware;
switch (dev->model) {
+ case EM2880_BOARD_EMPIRE_DUAL_TV:
case EM2880_BOARD_HAUPPAUGE_WINTV_HVR_900:
ctl->demod = XC3028_FE_ZARLINK456;
break;
case EM2880_BOARD_TERRATEC_HYBRID_XS:
+ case EM2881_BOARD_PINNACLE_HYBRID_PRO:
ctl->demod = XC3028_FE_ZARLINK456;
break;
case EM2880_BOARD_HAUPPAUGE_WINTV_HVR_900_R2:
@@ -1734,36 +2093,64 @@ static void em28xx_setup_xc3028(struct em28xx *dev, struct xc2028_ctrl *ctl)
ctl->demod = XC3028_FE_CHINA;
ctl->fname = XC2028_DEFAULT_FIRMWARE;
break;
+ case EM2882_BOARD_EVGA_INDTUBE:
+ ctl->demod = XC3028_FE_CHINA;
+ ctl->fname = XC3028L_DEFAULT_FIRMWARE;
+ break;
default:
ctl->demod = XC3028_FE_OREN538;
}
}
-static void em28xx_config_tuner(struct em28xx *dev)
+static void em28xx_tuner_setup(struct em28xx *dev)
{
- struct v4l2_priv_tun_config xc2028_cfg;
struct tuner_setup tun_setup;
struct v4l2_frequency f;
if (dev->tuner_type == TUNER_ABSENT)
return;
+ memset(&tun_setup, 0, sizeof(tun_setup));
+
tun_setup.mode_mask = T_ANALOG_TV | T_RADIO;
- tun_setup.type = dev->tuner_type;
- tun_setup.addr = dev->tuner_addr;
tun_setup.tuner_callback = em28xx_tuner_callback;
- em28xx_i2c_call_clients(dev, TUNER_SET_TYPE_ADDR, &tun_setup);
+ if (dev->board.radio.type) {
+ tun_setup.type = dev->board.radio.type;
+ tun_setup.addr = dev->board.radio_addr;
+
+ v4l2_device_call_all(&dev->v4l2_dev, 0, tuner, s_type_addr, &tun_setup);
+ }
+
+ if ((dev->tuner_type != TUNER_ABSENT) && (dev->tuner_type)) {
+ tun_setup.type = dev->tuner_type;
+ tun_setup.addr = dev->tuner_addr;
+
+ v4l2_device_call_all(&dev->v4l2_dev, 0, tuner, s_type_addr, &tun_setup);
+ }
+
+ if (dev->tda9887_conf) {
+ struct v4l2_priv_tun_config tda9887_cfg;
+
+ tda9887_cfg.tuner = TUNER_TDA9887;
+ tda9887_cfg.priv = &dev->tda9887_conf;
+
+ v4l2_device_call_all(&dev->v4l2_dev, 0, tuner, s_config, &tda9887_cfg);
+ }
if (dev->tuner_type == TUNER_XC2028) {
+ struct v4l2_priv_tun_config xc2028_cfg;
struct xc2028_ctrl ctl;
+ memset(&xc2028_cfg, 0, sizeof(xc2028_cfg));
+ memset(&ctl, 0, sizeof(ctl));
+
em28xx_setup_xc3028(dev, &ctl);
xc2028_cfg.tuner = TUNER_XC2028;
xc2028_cfg.priv = &ctl;
- em28xx_i2c_call_clients(dev, TUNER_SET_CONFIG, &xc2028_cfg);
+ v4l2_device_call_all(&dev->v4l2_dev, 0, tuner, s_config, &xc2028_cfg);
}
/* configure tuner */
@@ -1771,7 +2158,7 @@ static void em28xx_config_tuner(struct em28xx *dev)
f.type = V4L2_TUNER_ANALOG_TV;
f.frequency = 9076; /* just a magic number */
dev->ctl_freq = f.frequency;
- em28xx_i2c_call_clients(dev, VIDIOC_S_FREQUENCY, &f);
+ v4l2_device_call_all(&dev->v4l2_dev, 0, tuner, s_frequency, &f);
}
static int em28xx_hint_board(struct em28xx *dev)
@@ -1857,12 +2244,31 @@ static int em28xx_hint_board(struct em28xx *dev)
}
/* ----------------------------------------------------------------------- */
+#if LINUX_VERSION_CODE < KERNEL_VERSION(2, 6, 30)
void em28xx_set_ir(struct em28xx *dev, struct IR_i2c *ir)
+#else
+void em28xx_register_i2c_ir(struct em28xx *dev)
+#endif
{
+#if LINUX_VERSION_CODE < KERNEL_VERSION(2, 6, 30)
if (disable_ir) {
ir->get_key = NULL;
return ;
}
+#else
+ struct i2c_board_info info;
+ struct IR_i2c_init_data init_data;
+ const unsigned short addr_list[] = {
+ 0x30, 0x47, I2C_CLIENT_END
+ };
+
+ if (disable_ir)
+ return;
+
+ memset(&info, 0, sizeof(struct i2c_board_info));
+ memset(&init_data, 0, sizeof(struct IR_i2c_init_data));
+ strlcpy(info.type, "ir_video", I2C_NAME_SIZE);
+#endif
/* detect & configure */
switch (dev->model) {
@@ -1872,22 +2278,40 @@ void em28xx_set_ir(struct em28xx *dev, struct IR_i2c *ir)
break;
case (EM2800_BOARD_TERRATEC_CINERGY_200):
case (EM2820_BOARD_TERRATEC_CINERGY_250):
+#if LINUX_VERSION_CODE < KERNEL_VERSION(2, 6, 30)
ir->ir_codes = ir_codes_em_terratec;
ir->get_key = em28xx_get_key_terratec;
- snprintf(ir->c.name, sizeof(ir->c.name),
+ snprintf(ir->name, sizeof(ir->name),
"i2c IR (EM28XX Terratec)");
+#else
+ init_data.ir_codes = ir_codes_em_terratec;
+ init_data.get_key = em28xx_get_key_terratec;
+ init_data.name = "i2c IR (EM28XX Terratec)";
+#endif
break;
case (EM2820_BOARD_PINNACLE_USB_2):
+#if LINUX_VERSION_CODE < KERNEL_VERSION(2, 6, 30)
ir->ir_codes = ir_codes_pinnacle_grey;
ir->get_key = em28xx_get_key_pinnacle_usb_grey;
- snprintf(ir->c.name, sizeof(ir->c.name),
+ snprintf(ir->name, sizeof(ir->name),
"i2c IR (EM28XX Pinnacle PCTV)");
+#else
+ init_data.ir_codes = ir_codes_pinnacle_grey;
+ init_data.get_key = em28xx_get_key_pinnacle_usb_grey;
+ init_data.name = "i2c IR (EM28XX Pinnacle PCTV)";
+#endif
break;
case (EM2820_BOARD_HAUPPAUGE_WINTV_USB_2):
+#if LINUX_VERSION_CODE < KERNEL_VERSION(2, 6, 30)
ir->ir_codes = ir_codes_hauppauge_new;
ir->get_key = em28xx_get_key_em_haup;
- snprintf(ir->c.name, sizeof(ir->c.name),
+ snprintf(ir->name, sizeof(ir->name),
"i2c IR (EM2840 Hauppauge)");
+#else
+ init_data.ir_codes = ir_codes_hauppauge_new;
+ init_data.get_key = em28xx_get_key_em_haup;
+ init_data.name = "i2c IR (EM2840 Hauppauge)";
+#endif
break;
case (EM2820_BOARD_MSI_VOX_USB_2):
break;
@@ -1898,16 +2322,38 @@ void em28xx_set_ir(struct em28xx *dev, struct IR_i2c *ir)
case (EM2800_BOARD_GRABBEEX_USB2800):
break;
}
+#if LINUX_VERSION_CODE >= KERNEL_VERSION(2, 6, 30)
+
+ if (init_data.name)
+ info.platform_data = &init_data;
+ i2c_new_probed_device(&dev->i2c_adap, &info, addr_list);
+#endif
}
void em28xx_card_setup(struct em28xx *dev)
{
- em28xx_set_model(dev);
+ /*
+ * If the device can be a webcam, seek for a sensor.
+ * If sensor is not found, then it isn't a webcam.
+ */
+ if (dev->board.is_webcam) {
+ if (em28xx_hint_sensor(dev) < 0)
+ dev->board.is_webcam = 0;
+ else
+ dev->progressive = 1;
+ } else
+ em28xx_set_model(dev);
+
+ em28xx_info("Identified as %s (card=%d)\n",
+ dev->board.name, dev->model);
dev->tuner_type = em28xx_boards[dev->model].tuner_type;
if (em28xx_boards[dev->model].tuner_addr)
dev->tuner_addr = em28xx_boards[dev->model].tuner_addr;
+ if (em28xx_boards[dev->model].tda9887_conf)
+ dev->tda9887_conf = em28xx_boards[dev->model].tda9887_conf;
+
/* request some modules */
switch (dev->model) {
case EM2820_BOARD_HAUPPAUGE_WINTV_USB_2:
@@ -1937,6 +2383,12 @@ void em28xx_card_setup(struct em28xx *dev)
#endif
break;
}
+ case EM2882_BOARD_KWORLD_ATSC_315U:
+ em28xx_write_reg(dev, 0x0d, 0x42);
+ msleep(10);
+ em28xx_write_reg(dev, EM28XX_R08_GPIO, 0xfd);
+ msleep(10);
+ break;
case EM2820_BOARD_KWORLD_PVRTV2800RF:
/* GPIO enables sound on KWORLD PVR TV 2800RF */
em28xx_write_reg(dev, EM28XX_R08_GPIO, 0xf9);
@@ -1959,6 +2411,13 @@ void em28xx_card_setup(struct em28xx *dev)
case EM2880_BOARD_MSI_DIGIVOX_AD:
if (!em28xx_hint_board(dev))
em28xx_set_model(dev);
+
+ /* In cases where we had to use a board hint, the call to
+ em28xx_set_mode() in em28xx_pre_card_setup() was a no-op,
+ so make the call now so the analog GPIOs are set properly
+ before probing the i2c bus. */
+ em28xx_gpio_set(dev, dev->board.tuner_gpio);
+ em28xx_set_mode(dev, EM28XX_ANALOG_MODE);
break;
}
@@ -1978,23 +2437,70 @@ void em28xx_card_setup(struct em28xx *dev)
if (tuner >= 0)
dev->tuner_type = tuner;
-#ifdef CONFIG_MODULES
/* request some modules */
if (dev->board.has_msp34xx)
- request_module("msp3400");
+ v4l2_i2c_new_subdev(&dev->v4l2_dev, &dev->i2c_adap,
+ "msp3400", "msp3400", 0, msp3400_addrs);
+
if (dev->board.decoder == EM28XX_SAA711X)
- request_module("saa7115");
+ v4l2_i2c_new_subdev(&dev->v4l2_dev, &dev->i2c_adap,
+ "saa7115", "saa7115_auto", 0, saa711x_addrs);
+
if (dev->board.decoder == EM28XX_TVP5150)
- request_module("tvp5150");
- if (dev->board.tuner_type != TUNER_ABSENT)
- request_module("tuner");
- if (dev->board.adecoder == EM28XX_TVAUDIO)
- request_module("tvaudio");
+ v4l2_i2c_new_subdev(&dev->v4l2_dev, &dev->i2c_adap,
+ "tvp5150", "tvp5150", 0, tvp5150_addrs);
+
+ if (dev->em28xx_sensor == EM28XX_MT9V011) {
+ struct v4l2_subdev *sd;
+
+ sd = v4l2_i2c_new_subdev(&dev->v4l2_dev,
+ &dev->i2c_adap, "mt9v011", "mt9v011", 0, mt9v011_addrs);
+ v4l2_subdev_call(sd, core, s_config, 0, &dev->sensor_xtal);
+ }
+
+#if 0
+ /* FIXME: use mt9m001 after their conversion to v4l dev/subdev */
+ if (dev->em28xx_sensor == EM28XX_MT9M001)
+ v4l2_i2c_new_subdev(&dev->v4l2_dev, &dev->i2c_adap,
+ "mt9m001", "mt9m001", 0, mt9v011_addrs);
#endif
- em28xx_config_tuner(dev);
+ if (dev->board.adecoder == EM28XX_TVAUDIO)
+ v4l2_i2c_new_subdev(&dev->v4l2_dev, &dev->i2c_adap,
+ "tvaudio", "tvaudio", dev->board.tvaudio_addr, NULL);
+
+ if (dev->board.tuner_type != TUNER_ABSENT) {
+ int has_demod = (dev->tda9887_conf & TDA9887_PRESENT);
+
+ if (dev->board.radio.type)
+ v4l2_i2c_new_subdev(&dev->v4l2_dev, &dev->i2c_adap,
+ "tuner", "tuner", dev->board.radio_addr, NULL);
+
+ if (has_demod)
+ v4l2_i2c_new_subdev(&dev->v4l2_dev,
+ &dev->i2c_adap, "tuner", "tuner",
+ 0, v4l2_i2c_tuner_addrs(ADDRS_DEMOD));
+ if (dev->tuner_addr == 0) {
+ enum v4l2_i2c_tuner_type type =
+ has_demod ? ADDRS_TV_WITH_DEMOD : ADDRS_TV;
+ struct v4l2_subdev *sd;
+
+ sd = v4l2_i2c_new_subdev(&dev->v4l2_dev,
+ &dev->i2c_adap, "tuner", "tuner",
+ 0, v4l2_i2c_tuner_addrs(type));
+
+ if (sd)
+ dev->tuner_addr = v4l2_i2c_subdev_addr(sd);
+ } else {
+ v4l2_i2c_new_subdev(&dev->v4l2_dev, &dev->i2c_adap,
+ "tuner", "tuner", dev->tuner_addr, NULL);
+ }
+ }
- em28xx_ir_init(dev);
+ em28xx_tuner_setup(dev);
+
+ if(!disable_ir)
+ em28xx_ir_init(dev);
}
@@ -2053,6 +2559,9 @@ void em28xx_release_resources(struct em28xx *dev)
em28xx_remove_from_devlist(dev);
em28xx_i2c_unregister(dev);
+
+ v4l2_device_unregister(&dev->v4l2_dev);
+
usb_put_dev(dev->udev);
/* Mark device as unused */
@@ -2064,10 +2573,11 @@ void em28xx_release_resources(struct em28xx *dev)
* allocates and inits the device structs, registers i2c bus and v4l device
*/
static int em28xx_init_dev(struct em28xx **devhandle, struct usb_device *udev,
+ struct usb_interface *interface,
int minor)
{
struct em28xx *dev = *devhandle;
- int retval = -ENOMEM;
+ int retval;
int errCode;
dev->udev = udev;
@@ -2084,6 +2594,58 @@ static int em28xx_init_dev(struct em28xx **devhandle, struct usb_device *udev,
dev->em28xx_read_reg_req = em28xx_read_reg_req;
dev->board.is_em2800 = em28xx_boards[dev->model].is_em2800;
+ em28xx_set_model(dev);
+
+ /* Set the default GPO/GPIO for legacy devices */
+ dev->reg_gpo_num = EM2880_R04_GPO;
+ dev->reg_gpio_num = EM28XX_R08_GPIO;
+
+ dev->wait_after_write = 5;
+
+ /* Based on the Chip ID, set the device configuration */
+ retval = em28xx_read_reg(dev, EM28XX_R0A_CHIPID);
+ if (retval > 0) {
+ dev->chip_id = retval;
+
+ switch (dev->chip_id) {
+ case CHIP_ID_EM2710:
+ em28xx_info("chip ID is em2710\n");
+ break;
+ case CHIP_ID_EM2750:
+ em28xx_info("chip ID is em2750\n");
+ break;
+ case CHIP_ID_EM2820:
+ em28xx_info("chip ID is em2820 (or em2710)\n");
+ break;
+ case CHIP_ID_EM2840:
+ em28xx_info("chip ID is em2840\n");
+ break;
+ case CHIP_ID_EM2860:
+ em28xx_info("chip ID is em2860\n");
+ break;
+ case CHIP_ID_EM2870:
+ em28xx_info("chip ID is em2870\n");
+ dev->wait_after_write = 0;
+ break;
+ case CHIP_ID_EM2874:
+ em28xx_info("chip ID is em2874\n");
+ dev->reg_gpio_num = EM2874_R80_GPIO;
+ dev->wait_after_write = 0;
+ break;
+ case CHIP_ID_EM2883:
+ em28xx_info("chip ID is em2882/em2883\n");
+ dev->wait_after_write = 0;
+ break;
+ default:
+ em28xx_info("em28xx chip ID = %d\n", dev->chip_id);
+ }
+ }
+
+ /* Prepopulate cached GPO register content */
+ retval = em28xx_read_reg(dev, dev->reg_gpo_num);
+ if (retval >= 0)
+ dev->reg_gpo = retval;
+
em28xx_pre_card_setup(dev);
if (!dev->board.is_em2800) {
@@ -2097,20 +2659,34 @@ static int em28xx_init_dev(struct em28xx **devhandle, struct usb_device *udev,
}
}
+ retval = v4l2_device_register(&interface->dev, &dev->v4l2_dev);
+ if (retval < 0) {
+ em28xx_errdev("Call to v4l2_device_register() failed!\n");
+ return retval;
+ }
+
/* register i2c bus */
errCode = em28xx_i2c_register(dev);
if (errCode < 0) {
+ v4l2_device_unregister(&dev->v4l2_dev);
em28xx_errdev("%s: em28xx_i2c_register - errCode [%d]!\n",
__func__, errCode);
return errCode;
}
+ /*
+ * Default format, used for tvp5150 or saa711x output formats
+ */
+ dev->vinmode = 0x10;
+ dev->vinctl = 0x11;
+
/* Do board specific init and eeprom reading */
em28xx_card_setup(dev);
/* Configure audio */
errCode = em28xx_audio_setup(dev);
if (errCode < 0) {
+ v4l2_device_unregister(&dev->v4l2_dev);
em28xx_errdev("%s: Error while setting audio - errCode [%d]!\n",
__func__, errCode);
}
@@ -2158,7 +2734,7 @@ static int em28xx_init_dev(struct em28xx **devhandle, struct usb_device *udev,
em28xx_init_extension(dev);
/* Save some power by putting tuner to sleep */
- em28xx_i2c_call_clients(dev, TUNER_SET_STANDBY, NULL);
+ v4l2_device_call_all(&dev->v4l2_dev, 0, tuner, s_standby);
return 0;
@@ -2177,7 +2753,7 @@ static int em28xx_usb_probe(struct usb_interface *interface,
struct usb_device *udev;
struct usb_interface *uif;
struct em28xx *dev = NULL;
- int retval = -ENODEV;
+ int retval;
int i, nr, ifnum, isoc_pipe;
char *speed;
char descr[255] = "";
@@ -2199,7 +2775,8 @@ static int em28xx_usb_probe(struct usb_interface *interface,
interface->altsetting[0].desc.bInterfaceClass);
em28xx_devused &= ~(1<<nr);
- return -ENODEV;
+ retval = -ENODEV;
+ goto err;
}
endpoint = &interface->cur_altsetting->endpoint[0].desc;
@@ -2232,7 +2809,8 @@ static int em28xx_usb_probe(struct usb_interface *interface,
"interface not used by the driver\n");
em28xx_devused &= ~(1<<nr);
- return -ENODEV;
+ retval = -ENODEV;
+ goto err;
}
}
@@ -2271,11 +2849,26 @@ static int em28xx_usb_probe(struct usb_interface *interface,
ifnum,
interface->altsetting->desc.bInterfaceNumber);
+ /*
+ * Make sure we have 480 Mbps of bandwidth, otherwise things like
+ * video stream wouldn't likely work, since 12 Mbps is generally
+ * not enough even for most Digital TV streams.
+ */
+ if (udev->speed != USB_SPEED_HIGH && disable_usb_speed_check == 0) {
+ printk(DRIVER_NAME ": Device initialization failed.\n");
+ printk(DRIVER_NAME ": Device must be connected to a high-speed"
+ " USB 2.0 port.\n");
+ em28xx_devused &= ~(1<<nr);
+ retval = -ENODEV;
+ goto err;
+ }
+
if (nr >= EM28XX_MAXBOARDS) {
printk(DRIVER_NAME ": Supports only %i em28xx boards.\n",
EM28XX_MAXBOARDS);
em28xx_devused &= ~(1<<nr);
- return -ENOMEM;
+ retval = -ENOMEM;
+ goto err;
}
/* allocate memory for our device state and initialize it */
@@ -2283,7 +2876,8 @@ static int em28xx_usb_probe(struct usb_interface *interface,
if (dev == NULL) {
em28xx_err(DRIVER_NAME ": out of memory!\n");
em28xx_devused &= ~(1<<nr);
- return -ENOMEM;
+ retval = -ENOMEM;
+ goto err;
}
snprintf(dev->name, 29, "em28xx #%d", nr);
@@ -2310,7 +2904,8 @@ static int em28xx_usb_probe(struct usb_interface *interface,
em28xx_errdev("out of memory!\n");
em28xx_devused &= ~(1<<nr);
kfree(dev);
- return -ENOMEM;
+ retval = -ENOMEM;
+ goto err;
}
for (i = 0; i < dev->num_alt ; i++) {
@@ -2325,12 +2920,12 @@ static int em28xx_usb_probe(struct usb_interface *interface,
/* allocate device struct */
mutex_init(&dev->lock);
mutex_lock(&dev->lock);
- retval = em28xx_init_dev(&dev, udev, nr);
+ retval = em28xx_init_dev(&dev, udev, interface, nr);
if (retval) {
em28xx_devused &= ~(1<<dev->devno);
+ mutex_unlock(&dev->lock);
kfree(dev);
-
- return retval;
+ goto err;
}
/* save our data pointer in this interface device */
@@ -2344,6 +2939,9 @@ static int em28xx_usb_probe(struct usb_interface *interface,
mutex_unlock(&dev->lock);
return 0;
+
+err:
+ return retval;
}
/*
@@ -2369,6 +2967,8 @@ static void em28xx_usb_disconnect(struct usb_interface *interface)
wake_up_interruptible_all(&dev->open);
+ v4l2_device_disconnect(&dev->v4l2_dev);
+
if (dev->users) {
em28xx_warn
("device /dev/video%d is open! Deregistration and memory "
generated by cgit v1.2.3 (git 2.25.1) at 2025-01-05 04:16:59 +0000