diff options
Diffstat (limited to 'linux/drivers/media/video/em28xx/em28xx-cards.c')
| -rw-r--r-- | linux/drivers/media/video/em28xx/em28xx-cards.c | 44 |
1 files changed, 21 insertions, 23 deletions
diff --git a/linux/drivers/media/video/em28xx/em28xx-cards.c b/linux/drivers/media/video/em28xx/em28xx-cards.c index d12c8c890..8fb751d5c 100644 --- a/linux/drivers/media/video/em28xx/em28xx-cards.c +++ b/linux/drivers/media/video/em28xx/em28xx-cards.c @@ -314,6 +314,7 @@ struct em28xx_board em28xx_boards[] = { [EM2820_BOARD_TERRATEC_CINERGY_250] = { .name = "Terratec Cinergy 250 USB", .tuner_type = TUNER_LG_PAL_NEW_TAPC, + .has_ir_i2c = 1, .tda9887_conf = TDA9887_PRESENT, .decoder = EM28XX_SAA711X, .input = { { @@ -333,6 +334,7 @@ struct em28xx_board em28xx_boards[] = { [EM2820_BOARD_PINNACLE_USB_2] = { .name = "Pinnacle PCTV USB 2", .tuner_type = TUNER_LG_PAL_NEW_TAPC, + .has_ir_i2c = 1, .tda9887_conf = TDA9887_PRESENT, .decoder = EM28XX_SAA711X, .input = { { @@ -357,6 +359,7 @@ struct em28xx_board em28xx_boards[] = { TDA9887_PORT2_ACTIVE, .decoder = EM28XX_TVP5150, .has_msp34xx = 1, + .has_ir_i2c = 1, .input = { { .type = EM28XX_VMUX_TELEVISION, .vmux = TVP5150_COMPOSITE0, @@ -1004,6 +1007,7 @@ struct em28xx_board em28xx_boards[] = { [EM2800_BOARD_TERRATEC_CINERGY_200] = { .name = "Terratec Cinergy 200 USB", .is_em2800 = 1, + .has_ir_i2c = 1, .tuner_type = TUNER_LG_PAL_NEW_TAPC, .tda9887_conf = TDA9887_PRESENT, .decoder = EM28XX_SAA711X, @@ -1077,7 +1081,8 @@ struct em28xx_board em28xx_boards[] = { } }, }, [EM2820_BOARD_PINNACLE_DVC_90] = { - .name = "Pinnacle Dazzle DVC 90/100/101/107 / Kaiser Baas Video to DVD maker", + .name = "Pinnacle Dazzle DVC 90/100/101/107 / Kaiser Baas Video to DVD maker " + "/ Kworld DVD Maker 2", .tuner_type = TUNER_ABSENT, /* capture only board */ .decoder = EM28XX_SAA711X, .input = { { @@ -1682,6 +1687,8 @@ struct usb_device_id em28xx_id_table[] = { .driver_info = EM2870_BOARD_KWORLD_355U }, { USB_DEVICE(0x1b80, 0xe302), .driver_info = EM2820_BOARD_PINNACLE_DVC_90 }, /* Kaiser Baas Video to DVD maker */ + { USB_DEVICE(0x1b80, 0xe304), + .driver_info = EM2820_BOARD_PINNACLE_DVC_90 }, /* Kworld DVD Maker 2 */ { USB_DEVICE(0x0ccd, 0x0036), .driver_info = EM2820_BOARD_TERRATEC_CINERGY_250 }, { USB_DEVICE(0x0ccd, 0x004c), @@ -2292,12 +2299,8 @@ void em28xx_register_i2c_ir(struct em28xx *dev) /* detect & configure */ switch (dev->model) { - case (EM2800_BOARD_UNKNOWN): - break; - case (EM2820_BOARD_UNKNOWN): - break; - case (EM2800_BOARD_TERRATEC_CINERGY_200): - case (EM2820_BOARD_TERRATEC_CINERGY_250): + case EM2800_BOARD_TERRATEC_CINERGY_200: + case EM2820_BOARD_TERRATEC_CINERGY_250: #if LINUX_VERSION_CODE < KERNEL_VERSION(2, 6, 30) ir->ir_codes = &ir_codes_em_terratec_table; ir->get_key = em28xx_get_key_terratec; @@ -2309,7 +2312,7 @@ void em28xx_register_i2c_ir(struct em28xx *dev) dev->init_data.name = "i2c IR (EM28XX Terratec)"; #endif break; - case (EM2820_BOARD_PINNACLE_USB_2): + case EM2820_BOARD_PINNACLE_USB_2: #if LINUX_VERSION_CODE < KERNEL_VERSION(2, 6, 30) ir->ir_codes = &ir_codes_pinnacle_grey_table; ir->get_key = em28xx_get_key_pinnacle_usb_grey; @@ -2321,7 +2324,7 @@ void em28xx_register_i2c_ir(struct em28xx *dev) dev->init_data.name = "i2c IR (EM28XX Pinnacle PCTV)"; #endif break; - case (EM2820_BOARD_HAUPPAUGE_WINTV_USB_2): + case EM2820_BOARD_HAUPPAUGE_WINTV_USB_2: #if LINUX_VERSION_CODE < KERNEL_VERSION(2, 6, 30) ir->ir_codes = &ir_codes_hauppauge_new_table; ir->get_key = em28xx_get_key_em_haup; @@ -2333,14 +2336,6 @@ void em28xx_register_i2c_ir(struct em28xx *dev) dev->init_data.name = "i2c IR (EM2840 Hauppauge)"; #endif break; - case (EM2820_BOARD_MSI_VOX_USB_2): - break; - case (EM2800_BOARD_LEADTEK_WINFAST_USBII): - break; - case (EM2800_BOARD_KWORLD_USB2800): - break; - case (EM2800_BOARD_GRABBEEX_USB2800): - break; } #if LINUX_VERSION_CODE >= KERNEL_VERSION(2, 6, 30) @@ -2383,7 +2378,7 @@ void em28xx_card_setup(struct em28xx *dev) case EM2883_BOARD_HAUPPAUGE_WINTV_HVR_950: { struct tveeprom tv; -#ifdef CONFIG_MODULES +#if defined(CONFIG_MODULES) && defined(MODULE) request_module("tveeprom"); #endif /* Call first TVeeprom */ @@ -2397,10 +2392,6 @@ void em28xx_card_setup(struct em28xx *dev) dev->i2s_speed = 2048000; dev->board.has_msp34xx = 1; } -#ifdef CONFIG_MODULES - if (tv.has_ir) - request_module("ir-kbd-i2c"); -#endif break; } case EM2882_BOARD_KWORLD_ATSC_315U: @@ -2441,6 +2432,10 @@ void em28xx_card_setup(struct em28xx *dev) break; } +#if defined(CONFIG_MODULES) && defined(MODULE) + if (dev->board.has_ir_i2c && !disable_ir) + request_module("ir-kbd-i2c"); +#endif if (dev->board.has_snapshot_button) em28xx_register_snapshot_button(dev); @@ -2698,7 +2693,8 @@ static int em28xx_init_dev(struct em28xx **devhandle, struct usb_device *udev, * Default format, used for tvp5150 or saa711x output formats */ dev->vinmode = 0x10; - dev->vinctl = 0x11; + dev->vinctl = EM28XX_VINCTRL_INTERLACED | + EM28XX_VINCTRL_CCIR656_ENABLE; /* Do board specific init and eeprom reading */ em28xx_card_setup(dev); @@ -2717,6 +2713,8 @@ static int em28xx_init_dev(struct em28xx **devhandle, struct usb_device *udev, /* init video dma queues */ INIT_LIST_HEAD(&dev->vidq.active); INIT_LIST_HEAD(&dev->vidq.queued); + INIT_LIST_HEAD(&dev->vbiq.active); + INIT_LIST_HEAD(&dev->vbiq.queued); #if 0 video_set_drvdata(dev->vbi_dev, dev); |