1 files changed, 345 insertions, 35 deletions

diff --git a/linux/drivers/media/video/em28xx/em28xx-cards.c b/linux/drivers/media/video/em28xx/em28xx-cards.c
index fcb8131e6..16093680b 100644
--- a/linux/drivers/media/video/em28xx/em28xx-cards.c
+++ b/linux/drivers/media/video/em28xx/em28xx-cards.c
@@ -32,6 +32,8 @@
 #include <media/msp3400.h>
 #include <media/saa7115.h>
 #include <media/tvp5150.h>
+#include <media/tvaudio.h>
+#include <media/i2c-addr.h>
 #include <media/tveeprom.h>
 #include <media/v4l2-common.h>
 #include <media/v4l2-chip-ident.h>
@@ -48,6 +50,11 @@ static unsigned int disable_ir;
 module_param(disable_ir, int, 0444);
 MODULE_PARM_DESC(disable_ir, "disable infrared remote support");
 
+static unsigned int disable_usb_speed_check;
+module_param(disable_usb_speed_check, int, 0444);
+MODULE_PARM_DESC(disable_usb_speed_check,
+		 "override min bandwidth requirement of 480M bps");
+
 static unsigned int card[]     = {[0 ... (EM28XX_MAXBOARDS - 1)] = UNSET };
 module_param_array(card,  int, NULL, 0444);
 MODULE_PARM_DESC(card,     "card type");
@@ -115,6 +122,24 @@ static struct em28xx_reg_seq em2870_kworld_355u_digital[] = {
 };
 #endif
 
+/* Board - EM2882 Kworld 315U digital */
+static struct em28xx_reg_seq em2882_kworld_315u_digital[] = {
+	{EM28XX_R08_GPIO,	0xff,	0xff,		10},
+	{EM28XX_R08_GPIO,	0xfe,	0xff,		10},
+	{EM2880_R04_GPO,	0x04,	0xff,		10},
+	{EM2880_R04_GPO,	0x0c,	0xff,		10},
+	{EM28XX_R08_GPIO,	0x7e,	0xff,		10},
+	{  -1,			-1,	-1,		-1},
+};
+
+static struct em28xx_reg_seq em2882_kworld_315u_tuner_gpio[] = {
+	{EM2880_R04_GPO,	0x08,	0xff,		10},
+	{EM2880_R04_GPO,	0x0c,	0xff,		10},
+	{EM2880_R04_GPO,	0x08,	0xff,		10},
+	{EM2880_R04_GPO,	0x0c,	0xff,		10},
+	{  -1,			-1,	-1,		-1},
+};
+
 static struct em28xx_reg_seq kworld_330u_analog[] = {
 	{EM28XX_R08_GPIO,	0x6d,	~EM_GPIO_4,	10},
 	{EM2880_R04_GPO,	0x00,	0xff,		10},
@@ -151,6 +176,16 @@ static struct em28xx_reg_seq compro_mute_gpio[] = {
 	{  -1,			-1,		-1,		-1},
 };
 
+/* Terratec AV350 */
+static struct em28xx_reg_seq terratec_av350_mute_gpio[] = {
+	{EM28XX_R08_GPIO,	0xff,	0x7f,		10},
+	{	-1,		-1,	-1,		-1},
+};
+
+static struct em28xx_reg_seq terratec_av350_unmute_gpio[] = {
+	{EM28XX_R08_GPIO,	0xff,	0xff,		10},
+	{	-1,		-1,	-1,		-1},
+};
 /*
  *  Board definitions
  */
@@ -652,6 +687,7 @@ struct em28xx_board em28xx_boards[] = {
 		.mts_firmware = 1,
 		.has_dvb      = 1,
 		.dvb_gpio     = hauppauge_wintv_hvr_900_digital,
+		.ir_codes     = ir_codes_hauppauge_new,
 		.decoder      = EM28XX_TVP5150,
 		.input        = { {
 			.type     = EM28XX_VMUX_TELEVISION,
@@ -676,6 +712,7 @@ struct em28xx_board em28xx_boards[] = {
 		.tuner_type   = TUNER_XC2028,
 		.tuner_gpio   = default_tuner_gpio,
 		.mts_firmware = 1,
+		.ir_codes     = ir_codes_hauppauge_new,
 		.decoder      = EM28XX_TVP5150,
 #if 0 /* FIXME: add an entry at em28xx-dvb */
 		.has_dvb      = 1,
@@ -1029,16 +1066,17 @@ struct em28xx_board em28xx_boards[] = {
 			.amux     = EM28XX_AMUX_LINE_IN,
 		} },
 	},
-	[EM2860_BOARD_POINTNIX_INTRAORAL_CAMERA] = {
-		.name                = "PointNix Intra-Oral Camera",
+	[EM2860_BOARD_SAA711X_REFERENCE_DESIGN] = {
+		.name                = "EM2860/SAA711X Reference Design",
 		.has_snapshot_button = 1,
-		.tda9887_conf        = TDA9887_PRESENT,
 		.tuner_type          = TUNER_ABSENT,
 		.decoder             = EM28XX_SAA711X,
 		.input               = { {
 			.type     = EM28XX_VMUX_SVIDEO,
 			.vmux     = SAA7115_SVIDEO3,
-			.amux     = EM28XX_AMUX_VIDEO,
+		}, {
+			.type     = EM28XX_VMUX_COMPOSITE1,
+			.vmux     = SAA7115_COMPOSITE0,
 		} },
 	},
 	[EM2880_BOARD_MSI_DIGIVOX_AD] = {
@@ -1140,6 +1178,63 @@ struct em28xx_board em28xx_boards[] = {
 			.gpio     = default_analog,
 		} },
 	},
+	[EM2882_BOARD_KWORLD_ATSC_315U] = {
+		.name		= "KWorld ATSC 315U HDTV TV Box",
+		.valid		= EM28XX_BOARD_NOT_VALIDATED,
+		.tuner_type	= TUNER_THOMSON_DTT761X,
+		.tuner_gpio	= em2882_kworld_315u_tuner_gpio,
+		.tda9887_conf	= TDA9887_PRESENT,
+		.decoder	= EM28XX_SAA711X,
+		.has_dvb	= 1,
+		.dvb_gpio	= em2882_kworld_315u_digital,
+		.xclk		= EM28XX_XCLK_FREQUENCY_12MHZ,
+		.i2c_speed	= EM28XX_I2C_CLK_WAIT_ENABLE,
+		/* Analog mode - still not ready */
+		/*.input        = { {
+			.type = EM28XX_VMUX_TELEVISION,
+			.vmux = SAA7115_COMPOSITE2,
+			.amux = EM28XX_AMUX_VIDEO,
+			.gpio = em2882_kworld_315u_analog,
+			.aout = EM28XX_AOUT_PCM_IN | EM28XX_AOUT_PCM_STEREO,
+		}, {
+			.type = EM28XX_VMUX_COMPOSITE1,
+			.vmux = SAA7115_COMPOSITE0,
+			.amux = EM28XX_AMUX_LINE_IN,
+			.gpio = em2882_kworld_315u_analog1,
+			.aout = EM28XX_AOUT_PCM_IN | EM28XX_AOUT_PCM_STEREO,
+		}, {
+			.type = EM28XX_VMUX_SVIDEO,
+			.vmux = SAA7115_SVIDEO3,
+			.amux = EM28XX_AMUX_LINE_IN,
+			.gpio = em2882_kworld_315u_analog1,
+			.aout = EM28XX_AOUT_PCM_IN | EM28XX_AOUT_PCM_STEREO,
+		} }, */
+	},
+	[EM2880_BOARD_EMPIRE_DUAL_TV] = {
+		.name = "Empire dual TV",
+		.tuner_type = TUNER_XC2028,
+		.tuner_gpio = default_tuner_gpio,
+		.has_dvb = 1,
+		.dvb_gpio = default_digital,
+		.mts_firmware = 1,
+		.decoder = EM28XX_TVP5150,
+		.input = { {
+			.type = EM28XX_VMUX_TELEVISION,
+			.vmux = TVP5150_COMPOSITE0,
+			.amux = EM28XX_AMUX_VIDEO,
+			.gpio = default_analog,
+		}, {
+			.type = EM28XX_VMUX_COMPOSITE1,
+			.vmux = TVP5150_COMPOSITE1,
+			.amux = EM28XX_AMUX_LINE_IN,
+			.gpio = default_analog,
+		}, {
+			.type = EM28XX_VMUX_SVIDEO,
+			.vmux = TVP5150_SVIDEO,
+			.amux = EM28XX_AMUX_LINE_IN,
+			.gpio = default_analog,
+		} },
+	},
 	[EM2881_BOARD_DNT_DA2_HYBRID] = {
 		.name         = "DNT DA2 Hybrid",
 		.valid        = EM28XX_BOARD_NOT_VALIDATED,
@@ -1303,6 +1398,7 @@ struct em28xx_board em28xx_boards[] = {
 	[EM2820_BOARD_COMPRO_VIDEOMATE_FORYOU] = {
 		.name         = "Compro VideoMate ForYou/Stereo",
 		.tuner_type   = TUNER_LG_PAL_NEW_TAPC,
+		.tvaudio_addr = 0xb0,
 		.tda9887_conf = TDA9887_PRESENT,
 		.decoder      = EM28XX_TVP5150,
 		.adecoder     = EM28XX_TVAUDIO,
@@ -1382,6 +1478,42 @@ struct em28xx_board em28xx_boards[] = {
 			.amux     = EM28XX_AMUX_VIDEO,
 		} },
 	},
+	[EM2860_BOARD_TERRATEC_GRABBY] = {
+		.name            = "Terratec Grabby",
+		.vchannels       = 2,
+		.tuner_type      = TUNER_ABSENT,
+		.decoder         = EM28XX_SAA711X,
+		.xclk            = EM28XX_XCLK_FREQUENCY_12MHZ,
+		.input           = { {
+			.type     = EM28XX_VMUX_COMPOSITE1,
+			.vmux     = SAA7115_COMPOSITE0,
+			.amux     = EM28XX_AMUX_VIDEO2,
+		}, {
+			.type     = EM28XX_VMUX_SVIDEO,
+			.vmux     = SAA7115_SVIDEO3,
+			.amux     = EM28XX_AMUX_VIDEO2,
+		} },
+	},
+	[EM2860_BOARD_TERRATEC_AV350] = {
+		.name            = "Terratec AV350",
+		.vchannels       = 2,
+		.tuner_type      = TUNER_ABSENT,
+		.decoder         = EM28XX_TVP5150,
+		.xclk            = EM28XX_XCLK_FREQUENCY_12MHZ,
+		.mute_gpio       = terratec_av350_mute_gpio,
+		.input           = { {
+			.type     = EM28XX_VMUX_COMPOSITE1,
+			.vmux     = TVP5150_COMPOSITE1,
+			.amux     = EM28XX_AUDIO_SRC_LINE,
+			.gpio     = terratec_av350_unmute_gpio,
+
+		}, {
+			.type     = EM28XX_VMUX_SVIDEO,
+			.vmux     = TVP5150_SVIDEO,
+			.amux     = EM28XX_AUDIO_SRC_LINE,
+			.gpio     = terratec_av350_unmute_gpio,
+		} },
+	},
 };
 const unsigned int em28xx_bcount = ARRAY_SIZE(em28xx_boards);
 
@@ -1419,6 +1551,8 @@ struct usb_device_id em28xx_id_table[] = {
 	{ USB_DEVICE(0xeb1a, 0xe310),
 			.driver_info = EM2880_BOARD_KWORLD_DVB_310U },
 #endif
+	{ USB_DEVICE(0xeb1a, 0xa313),
+		.driver_info = EM2882_BOARD_KWORLD_ATSC_315U },
 	{ USB_DEVICE(0xeb1a, 0xa316),
 			.driver_info = EM2883_BOARD_KWORLD_HYBRID_330U },
 	{ USB_DEVICE(0xeb1a, 0xe320),
@@ -1449,6 +1583,10 @@ struct usb_device_id em28xx_id_table[] = {
 			.driver_info = EM2870_BOARD_TERRATEC_XS },
 	{ USB_DEVICE(0x0ccd, 0x0047),
 			.driver_info = EM2880_BOARD_TERRATEC_PRODIGY_XS },
+	{ USB_DEVICE(0x0ccd, 0x0084),
+			.driver_info = EM2860_BOARD_TERRATEC_AV350 },
+	{ USB_DEVICE(0x0ccd, 0x0096),
+			.driver_info = EM2860_BOARD_TERRATEC_GRABBY },
 	{ USB_DEVICE(0x185b, 0x2870),
 			.driver_info = EM2870_BOARD_COMPRO_VIDEOMATE },
 	{ USB_DEVICE(0x185b, 0x2041),
@@ -1501,16 +1639,35 @@ static struct em28xx_hash_table em28xx_eeprom_hash[] = {
 	{0x6ce05a8f, EM2820_BOARD_PROLINK_PLAYTV_USB2, TUNER_YMEC_TVF_5533MF},
 	{0x72cc5a8b, EM2820_BOARD_PROLINK_PLAYTV_BOX4_USB2, TUNER_YMEC_TVF_5533MF},
 	{0x966a0441, EM2880_BOARD_KWORLD_DVB_310U, TUNER_XC2028},
+	{0x9567eb1a, EM2880_BOARD_EMPIRE_DUAL_TV, TUNER_XC2028},
 };
 
 /* I2C devicelist hash table for devices with generic USB IDs */
 static struct em28xx_hash_table em28xx_i2c_hash[] = {
 	{0xb06a32c3, EM2800_BOARD_TERRATEC_CINERGY_200, TUNER_LG_PAL_NEW_TAPC},
 	{0xf51200e3, EM2800_BOARD_VGEAR_POCKETTV, TUNER_LG_PAL_NEW_TAPC},
-	{0x1ba50080, EM2860_BOARD_POINTNIX_INTRAORAL_CAMERA, TUNER_ABSENT},
+	{0x1ba50080, EM2860_BOARD_SAA711X_REFERENCE_DESIGN, TUNER_ABSENT},
 	{0xc51200e3, EM2820_BOARD_GADMEI_TVR200, TUNER_LG_PAL_NEW_TAPC},
 };
 
+/* I2C possible address to saa7115, tvp5150, msp3400, tvaudio */
+static unsigned short saa711x_addrs[] = {
+	0x4a >> 1, 0x48 >> 1,   /* SAA7111, SAA7111A and SAA7113 */
+	0x42 >> 1, 0x40 >> 1,   /* SAA7114, SAA7115 and SAA7118 */
+	I2C_CLIENT_END };
+
+static unsigned short tvp5150_addrs[] = {
+	0xb8 >> 1,
+	0xba >> 1,
+	I2C_CLIENT_END
+};
+
+static unsigned short msp3400_addrs[] = {
+	0x80 >> 1,
+	0x88 >> 1,
+	I2C_CLIENT_END
+};
+
 int em28xx_tuner_callback(void *ptr, int component, int command, int arg)
 {
 	int rc = 0;
@@ -1665,6 +1822,17 @@ void em28xx_pre_card_setup(struct em28xx *dev)
 		em28xx_write_reg(dev, EM28XX_R08_GPIO, 0xfd);
 		break;
 
+	case EM2882_BOARD_KWORLD_ATSC_315U:
+		em28xx_write_reg(dev, EM28XX_R08_GPIO, 0xff);
+		msleep(10);
+		em28xx_write_reg(dev, EM28XX_R08_GPIO, 0xfe);
+		msleep(10);
+		em28xx_write_reg(dev, EM2880_R04_GPO, 0x00);
+		msleep(10);
+		em28xx_write_reg(dev, EM2880_R04_GPO, 0x08);
+		msleep(10);
+		break;
+
 	case EM2860_BOARD_KAIOMY_TVNPC_U2:
 		em28xx_write_regs(dev, EM28XX_R0F_XCLK, "\x07", 1);
 		em28xx_write_regs(dev, EM28XX_R06_I2C_CLK, "\x40", 1);
@@ -1710,6 +1878,7 @@ static void em28xx_setup_xc3028(struct em28xx *dev, struct xc2028_ctrl *ctl)
 	ctl->mts = em28xx_boards[dev->model].mts_firmware;
 
 	switch (dev->model) {
+	case EM2880_BOARD_EMPIRE_DUAL_TV:
 	case EM2880_BOARD_HAUPPAUGE_WINTV_HVR_900:
 		ctl->demod = XC3028_FE_ZARLINK456;
 		break;
@@ -1739,31 +1908,55 @@ static void em28xx_setup_xc3028(struct em28xx *dev, struct xc2028_ctrl *ctl)
 	}
 }
 
-static void em28xx_config_tuner(struct em28xx *dev)
+static void em28xx_tuner_setup(struct em28xx *dev)
 {
-	struct v4l2_priv_tun_config  xc2028_cfg;
 	struct tuner_setup           tun_setup;
 	struct v4l2_frequency        f;
 
 	if (dev->tuner_type == TUNER_ABSENT)
 		return;
 
+	memset(&tun_setup, 0, sizeof(tun_setup));
+
 	tun_setup.mode_mask = T_ANALOG_TV | T_RADIO;
-	tun_setup.type = dev->tuner_type;
-	tun_setup.addr = dev->tuner_addr;
 	tun_setup.tuner_callback = em28xx_tuner_callback;
 
-	em28xx_i2c_call_clients(dev, TUNER_SET_TYPE_ADDR, &tun_setup);
+	if (dev->board.radio.type) {
+		tun_setup.type = dev->board.radio.type;
+		tun_setup.addr = dev->board.radio_addr;
+
+		v4l2_device_call_all(&dev->v4l2_dev, 0, tuner, s_type_addr, &tun_setup);
+	}
+
+	if ((dev->tuner_type != TUNER_ABSENT) && (dev->tuner_type)) {
+		tun_setup.type   = dev->tuner_type;
+		tun_setup.addr   = dev->tuner_addr;
+
+		v4l2_device_call_all(&dev->v4l2_dev, 0, tuner, s_type_addr, &tun_setup);
+	}
+
+	if (dev->tda9887_conf) {
+		struct v4l2_priv_tun_config tda9887_cfg;
+
+		tda9887_cfg.tuner = TUNER_TDA9887;
+		tda9887_cfg.priv = &dev->tda9887_conf;
+
+		v4l2_device_call_all(&dev->v4l2_dev, 0, tuner, s_config, &tda9887_cfg);
+	}
 
 	if (dev->tuner_type == TUNER_XC2028) {
+		struct v4l2_priv_tun_config  xc2028_cfg;
 		struct xc2028_ctrl           ctl;
 
+		memset(&xc2028_cfg, 0, sizeof(xc2028_cfg));
+		memset(&ctl, 0, sizeof(ctl));
+
 		em28xx_setup_xc3028(dev, &ctl);
 
 		xc2028_cfg.tuner = TUNER_XC2028;
 		xc2028_cfg.priv  = &ctl;
 
-		em28xx_i2c_call_clients(dev, TUNER_SET_CONFIG, &xc2028_cfg);
+		v4l2_device_call_all(&dev->v4l2_dev, 0, tuner, s_config, &xc2028_cfg);
 	}
 
 	/* configure tuner */
@@ -1771,7 +1964,7 @@ static void em28xx_config_tuner(struct em28xx *dev)
 	f.type = V4L2_TUNER_ANALOG_TV;
 	f.frequency = 9076;     /* just a magic number */
 	dev->ctl_freq = f.frequency;
-	em28xx_i2c_call_clients(dev, VIDIOC_S_FREQUENCY, &f);
+	v4l2_device_call_all(&dev->v4l2_dev, 0, tuner, s_frequency, &f);
 }
 
 static int em28xx_hint_board(struct em28xx *dev)
@@ -1857,12 +2050,31 @@ static int em28xx_hint_board(struct em28xx *dev)
 }
 
 /* ----------------------------------------------------------------------- */
+#if LINUX_VERSION_CODE < KERNEL_VERSION(2, 6, 30)
 void em28xx_set_ir(struct em28xx *dev, struct IR_i2c *ir)
+#else
+void em28xx_register_i2c_ir(struct em28xx *dev)
+#endif
 {
+#if LINUX_VERSION_CODE < KERNEL_VERSION(2, 6, 30)
 	if (disable_ir) {
 		ir->get_key = NULL;
 		return ;
 	}
+#else
+	struct i2c_board_info info;
+	struct IR_i2c_init_data init_data;
+	const unsigned short addr_list[] = {
+		 0x30, 0x47, I2C_CLIENT_END
+	};
+
+	if (disable_ir)
+		return;
+
+	memset(&info, 0, sizeof(struct i2c_board_info));
+	memset(&init_data, 0, sizeof(struct IR_i2c_init_data));
+	strlcpy(info.type, "ir_video", I2C_NAME_SIZE);
+#endif
 
 	/* detect & configure */
 	switch (dev->model) {
@@ -1872,22 +2084,40 @@ void em28xx_set_ir(struct em28xx *dev, struct IR_i2c *ir)
 		break;
 	case (EM2800_BOARD_TERRATEC_CINERGY_200):
 	case (EM2820_BOARD_TERRATEC_CINERGY_250):
+#if LINUX_VERSION_CODE < KERNEL_VERSION(2, 6, 30)
 		ir->ir_codes = ir_codes_em_terratec;
 		ir->get_key = em28xx_get_key_terratec;
-		snprintf(ir->c.name, sizeof(ir->c.name),
+		snprintf(ir->name, sizeof(ir->name),
 			 "i2c IR (EM28XX Terratec)");
+#else
+		init_data.ir_codes = ir_codes_em_terratec;
+		init_data.get_key = em28xx_get_key_terratec;
+		init_data.name = "i2c IR (EM28XX Terratec)";
+#endif
 		break;
 	case (EM2820_BOARD_PINNACLE_USB_2):
+#if LINUX_VERSION_CODE < KERNEL_VERSION(2, 6, 30)
 		ir->ir_codes = ir_codes_pinnacle_grey;
 		ir->get_key = em28xx_get_key_pinnacle_usb_grey;
-		snprintf(ir->c.name, sizeof(ir->c.name),
+		snprintf(ir->name, sizeof(ir->name),
 			 "i2c IR (EM28XX Pinnacle PCTV)");
+#else
+		init_data.ir_codes = ir_codes_pinnacle_grey;
+		init_data.get_key = em28xx_get_key_pinnacle_usb_grey;
+		init_data.name = "i2c IR (EM28XX Pinnacle PCTV)";
+#endif
 		break;
 	case (EM2820_BOARD_HAUPPAUGE_WINTV_USB_2):
+#if LINUX_VERSION_CODE < KERNEL_VERSION(2, 6, 30)
 		ir->ir_codes = ir_codes_hauppauge_new;
 		ir->get_key = em28xx_get_key_em_haup;
-		snprintf(ir->c.name, sizeof(ir->c.name),
+		snprintf(ir->name, sizeof(ir->name),
 			 "i2c IR (EM2840 Hauppauge)");
+#else
+		init_data.ir_codes = ir_codes_hauppauge_new;
+		init_data.get_key = em28xx_get_key_em_haup;
+		init_data.name = "i2c IR (EM2840 Hauppauge)";
+#endif
 		break;
 	case (EM2820_BOARD_MSI_VOX_USB_2):
 		break;
@@ -1898,6 +2128,12 @@ void em28xx_set_ir(struct em28xx *dev, struct IR_i2c *ir)
 	case (EM2800_BOARD_GRABBEEX_USB2800):
 		break;
 	}
+#if LINUX_VERSION_CODE >= KERNEL_VERSION(2, 6, 30)
+
+	if (init_data.name)
+		info.platform_data = &init_data;
+	i2c_new_probed_device(&dev->i2c_adap, &info, addr_list);
+#endif
 }
 
 void em28xx_card_setup(struct em28xx *dev)
@@ -1908,6 +2144,9 @@ void em28xx_card_setup(struct em28xx *dev)
 	if (em28xx_boards[dev->model].tuner_addr)
 		dev->tuner_addr = em28xx_boards[dev->model].tuner_addr;
 
+	if (em28xx_boards[dev->model].tda9887_conf)
+		dev->tda9887_conf = em28xx_boards[dev->model].tda9887_conf;
+
 	/* request some modules */
 	switch (dev->model) {
 	case EM2820_BOARD_HAUPPAUGE_WINTV_USB_2:
@@ -1937,6 +2176,12 @@ void em28xx_card_setup(struct em28xx *dev)
 #endif
 		break;
 	}
+	case EM2882_BOARD_KWORLD_ATSC_315U:
+		em28xx_write_reg(dev, 0x0d, 0x42);
+		msleep(10);
+		em28xx_write_reg(dev, EM28XX_R08_GPIO, 0xfd);
+		msleep(10);
+		break;
 	case EM2820_BOARD_KWORLD_PVRTV2800RF:
 		/* GPIO enables sound on KWORLD PVR TV 2800RF */
 		em28xx_write_reg(dev, EM28XX_R08_GPIO, 0xf9);
@@ -1978,22 +2223,52 @@ void em28xx_card_setup(struct em28xx *dev)
 	if (tuner >= 0)
 		dev->tuner_type = tuner;
 
-#ifdef CONFIG_MODULES
 	/* request some modules */
 	if (dev->board.has_msp34xx)
-		request_module("msp3400");
+		v4l2_i2c_new_probed_subdev(&dev->v4l2_dev, &dev->i2c_adap,
+			"msp3400", "msp3400", msp3400_addrs);
+
 	if (dev->board.decoder == EM28XX_SAA711X)
-		request_module("saa7115");
+		v4l2_i2c_new_probed_subdev(&dev->v4l2_dev, &dev->i2c_adap,
+			"saa7115", "saa7115_auto", saa711x_addrs);
+
 	if (dev->board.decoder == EM28XX_TVP5150)
-		request_module("tvp5150");
-	if (dev->board.tuner_type != TUNER_ABSENT)
-		request_module("tuner");
-	if (dev->board.adecoder == EM28XX_TVAUDIO)
-		request_module("tvaudio");
-#endif
+		v4l2_i2c_new_probed_subdev(&dev->v4l2_dev, &dev->i2c_adap,
+			"tvp5150", "tvp5150", tvp5150_addrs);
 
-	em28xx_config_tuner(dev);
+	if (dev->board.adecoder == EM28XX_TVAUDIO)
+		v4l2_i2c_new_subdev(&dev->v4l2_dev, &dev->i2c_adap,
+			"tvaudio", "tvaudio", dev->board.tvaudio_addr);
+
+	if (dev->board.tuner_type != TUNER_ABSENT) {
+		int has_demod = (dev->tda9887_conf & TDA9887_PRESENT);
+
+		if (dev->board.radio.type)
+			v4l2_i2c_new_subdev(&dev->v4l2_dev, &dev->i2c_adap,
+				"tuner", "tuner", dev->board.radio_addr);
+
+		if (has_demod)
+			v4l2_i2c_new_probed_subdev(&dev->v4l2_dev,
+				&dev->i2c_adap, "tuner", "tuner",
+				v4l2_i2c_tuner_addrs(ADDRS_DEMOD));
+		if (dev->tuner_addr == 0) {
+			enum v4l2_i2c_tuner_type type =
+				has_demod ? ADDRS_TV_WITH_DEMOD : ADDRS_TV;
+			struct v4l2_subdev *sd;
+
+			sd = v4l2_i2c_new_probed_subdev(&dev->v4l2_dev,
+				&dev->i2c_adap, "tuner", "tuner",
+				v4l2_i2c_tuner_addrs(type));
+
+			if (sd)
+				dev->tuner_addr = v4l2_i2c_subdev_addr(sd);
+		} else {
+			v4l2_i2c_new_subdev(&dev->v4l2_dev, &dev->i2c_adap,
+				"tuner", "tuner", dev->tuner_addr);
+		}
+	}
 
+	em28xx_tuner_setup(dev);
 	em28xx_ir_init(dev);
 }
 
@@ -2053,6 +2328,9 @@ void em28xx_release_resources(struct em28xx *dev)
 	em28xx_remove_from_devlist(dev);
 
 	em28xx_i2c_unregister(dev);
+
+	v4l2_device_unregister(&dev->v4l2_dev);
+
 	usb_put_dev(dev->udev);
 
 	/* Mark device as unused */
@@ -2064,6 +2342,7 @@ void em28xx_release_resources(struct em28xx *dev)
  * allocates and inits the device structs, registers i2c bus and v4l device
  */
 static int em28xx_init_dev(struct em28xx **devhandle, struct usb_device *udev,
+			   struct usb_interface *interface,
 			   int minor)
 {
 	struct em28xx *dev = *devhandle;
@@ -2097,9 +2376,16 @@ static int em28xx_init_dev(struct em28xx **devhandle, struct usb_device *udev,
 		}
 	}
 
+	retval = v4l2_device_register(&interface->dev, &dev->v4l2_dev);
+	if (retval < 0) {
+		em28xx_errdev("Call to v4l2_device_register() failed!\n");
+		return retval;
+	}
+
 	/* register i2c bus */
 	errCode = em28xx_i2c_register(dev);
 	if (errCode < 0) {
+		v4l2_device_unregister(&dev->v4l2_dev);
 		em28xx_errdev("%s: em28xx_i2c_register - errCode [%d]!\n",
 			__func__, errCode);
 		return errCode;
@@ -2111,6 +2397,7 @@ static int em28xx_init_dev(struct em28xx **devhandle, struct usb_device *udev,
 	/* Configure audio */
 	errCode = em28xx_audio_setup(dev);
 	if (errCode < 0) {
+		v4l2_device_unregister(&dev->v4l2_dev);
 		em28xx_errdev("%s: Error while setting audio - errCode [%d]!\n",
 			__func__, errCode);
 	}
@@ -2158,7 +2445,7 @@ static int em28xx_init_dev(struct em28xx **devhandle, struct usb_device *udev,
 	em28xx_init_extension(dev);
 
 	/* Save some power by putting tuner to sleep */
-	em28xx_i2c_call_clients(dev, TUNER_SET_STANDBY, NULL);
+	v4l2_device_call_all(&dev->v4l2_dev, 0, tuner, s_standby);
 
 	return 0;
 
@@ -2177,7 +2464,7 @@ static int em28xx_usb_probe(struct usb_interface *interface,
 	struct usb_device *udev;
 	struct usb_interface *uif;
 	struct em28xx *dev = NULL;
-	int retval = -ENODEV;
+	int retval;
 	int i, nr, ifnum, isoc_pipe;
 	char *speed;
 	char descr[255] = "";
@@ -2199,7 +2486,8 @@ static int em28xx_usb_probe(struct usb_interface *interface,
 			interface->altsetting[0].desc.bInterfaceClass);
 
 		em28xx_devused &= ~(1<<nr);
-		return -ENODEV;
+		retval = -ENODEV;
+		goto err;
 	}
 
 	endpoint = &interface->cur_altsetting->endpoint[0].desc;
@@ -2232,7 +2520,8 @@ static int em28xx_usb_probe(struct usb_interface *interface,
 				"interface not used by the driver\n");
 
 			em28xx_devused &= ~(1<<nr);
-			return -ENODEV;
+			retval = -ENODEV;
+			goto err;
 		}
 	}
 
@@ -2271,11 +2560,26 @@ static int em28xx_usb_probe(struct usb_interface *interface,
 		ifnum,
 		interface->altsetting->desc.bInterfaceNumber);
 
+	/*
+	 * Make sure we have 480 Mbps of bandwidth, otherwise things like
+	 * video stream wouldn't likely work, since 12 Mbps is generally
+	 * not enough even for most Digital TV streams.
+	 */
+	if (udev->speed != USB_SPEED_HIGH && disable_usb_speed_check == 0) {
+		printk(DRIVER_NAME ": Device initialization failed.\n");
+		printk(DRIVER_NAME ": Device must be connected to a high-speed"
+		       " USB 2.0 port.\n");
+		em28xx_devused &= ~(1<<nr);
+		retval = -ENODEV;
+		goto err;
+	}
+
 	if (nr >= EM28XX_MAXBOARDS) {
 		printk(DRIVER_NAME ": Supports only %i em28xx boards.\n",
 				EM28XX_MAXBOARDS);
 		em28xx_devused &= ~(1<<nr);
-		return -ENOMEM;
+		retval = -ENOMEM;
+		goto err;
 	}
 
 	/* allocate memory for our device state and initialize it */
@@ -2283,7 +2587,8 @@ static int em28xx_usb_probe(struct usb_interface *interface,
 	if (dev == NULL) {
 		em28xx_err(DRIVER_NAME ": out of memory!\n");
 		em28xx_devused &= ~(1<<nr);
-		return -ENOMEM;
+		retval = -ENOMEM;
+		goto err;
 	}
 
 	snprintf(dev->name, 29, "em28xx #%d", nr);
@@ -2310,7 +2615,8 @@ static int em28xx_usb_probe(struct usb_interface *interface,
 		em28xx_errdev("out of memory!\n");
 		em28xx_devused &= ~(1<<nr);
 		kfree(dev);
-		return -ENOMEM;
+		retval = -ENOMEM;
+		goto err;
 	}
 
 	for (i = 0; i < dev->num_alt ; i++) {
@@ -2325,12 +2631,11 @@ static int em28xx_usb_probe(struct usb_interface *interface,
 	/* allocate device struct */
 	mutex_init(&dev->lock);
 	mutex_lock(&dev->lock);
-	retval = em28xx_init_dev(&dev, udev, nr);
+	retval = em28xx_init_dev(&dev, udev, interface, nr);
 	if (retval) {
 		em28xx_devused &= ~(1<<dev->devno);
 		kfree(dev);
-
-		return retval;
+		goto err;
 	}
 
 	/* save our data pointer in this interface device */
@@ -2344,6 +2649,9 @@ static int em28xx_usb_probe(struct usb_interface *interface,
 	mutex_unlock(&dev->lock);
 
 	return 0;
+
+err:
+	return retval;
 }
 
 /*
@@ -2369,6 +2677,8 @@ static void em28xx_usb_disconnect(struct usb_interface *interface)
 
 	wake_up_interruptible_all(&dev->open);
 
+	v4l2_device_disconnect(&dev->v4l2_dev);
+
 	if (dev->users) {
 		em28xx_warn
 		    ("device /dev/video%d is open! Deregistration and memory "