diff options
Diffstat (limited to 'linux/drivers/media/video/em28xx/em28xx-reg.h')
| -rw-r--r-- | linux/drivers/media/video/em28xx/em28xx-reg.h | 58 |
1 files changed, 53 insertions, 5 deletions
diff --git a/linux/drivers/media/video/em28xx/em28xx-reg.h b/linux/drivers/media/video/em28xx/em28xx-reg.h index 6e5757caa..491d66abe 100644 --- a/linux/drivers/media/video/em28xx/em28xx-reg.h +++ b/linux/drivers/media/video/em28xx/em28xx-reg.h @@ -78,11 +78,6 @@ 0x47 IR data */ -/* em202 registers */ -#define EM28XX_R02_MASTER_AC97 0x02 -#define EM28XX_R10_LINE_IN_AC97 0x10 -#define EM28XX_R14_VIDEO_AC97 0x14 - /* em2874 registers */ #define EM2874_R50_IR_CONFIG 0x50 #define EM2874_R51_IR 0x51 @@ -113,7 +108,60 @@ enum em28xx_chip_id { CHIP_ID_EM2820 = 18, CHIP_ID_EM2840 = 20, + CHIP_ID_EM2750 = 33, CHIP_ID_EM2860 = 34, CHIP_ID_EM2883 = 36, CHIP_ID_EM2874 = 65, }; + +/* + * Registers used by em202 and other AC97 chips + */ + +/* Standard AC97 registers */ +#define AC97_RESET 0x00 +#define AC97_MASTER_VOL 0x02 +#define AC97_LINE_LEVEL_VOL 0x04 +#define AC97_MASTER_MONO_VOL 0x06 + +#define AC97_PC_BEEP_VOL 0x0a +#define AC97_PHONE_VOL 0x0c +#define AC97_MIC_VOL 0x0e +#define AC97_LINEIN_VOL 0x10 +#define AC97_CD_VOL 0x12 +#define AC97_VIDEO_VOL 0x14 +#define AC97_AUX_VOL 0x16 +#define AC97_PCM_OUT_VOL 0x18 +#define AC97_RECORD_SELECT 0x1a +#define AC97_RECORD_GAIN 0x1c +#define AC97_GENERAL_PURPOSE 0x20 +#define AC97_3D_CTRL 0x22 +#define AC97_AUD_INT_AND_PAG 0x24 +#define AC97_POWER_DOWN_CTRL 0x26 +#define AC97_EXT_AUD_ID 0x28 +#define AC97_EXT_AUD_CTRL 0x2a + +/* Supported rate varies for each AC97 device + if write an unsupported value, it will return the closest one + */ +#define AC97_PCM_OUT_FRONT_SRATE 0x2c +#define AC97_PCM_OUT_SURR_SRATE 0x2e +#define AC97_PCM_OUT_LFE_SRATE 0x30 +#define AC97_PCM_IN_SRATE 0x32 +#define AC97_LFE_MASTER_VOL 0x36 +#define AC97_SURR_MASTER_VOL 0x38 +#define AC97_SPDIF_OUT_CTRL 0x3a + +#define AC97_VENDOR_ID1 0x7c +#define AC97_VENDOR_ID2 0x7e + +/* EMP202 vendor registers */ +#define EM202_EXT_MODEM_CTRL 0x3e +#define EM202_GPIO_CONF 0x4c +#define EM202_GPIO_POLARITY 0x4e +#define EM202_GPIO_STICKY 0x50 +#define EM202_GPIO_MASK 0x52 +#define EM202_GPIO_STATUS 0x54 +#define EM202_SPDIF_OUT_SEL 0x6a +#define EM202_ANTIPOP 0x72 +#define EM202_EAPD_GPIO_ACCESS 0x74 |