1 files changed, 11 insertions, 15 deletions

diff --git a/linux/drivers/media/video/em28xx/em28xx-video.c b/linux/drivers/media/video/em28xx/em28xx-video.c
index 5da519bfa..12f7fa0a3 100644
--- a/linux/drivers/media/video/em28xx/em28xx-video.c
+++ b/linux/drivers/media/video/em28xx/em28xx-video.c
@@ -521,7 +521,7 @@ static int em28xx_config(struct em28xx *dev)
 	int retval;
 
 	/* Sets I2C speed to 100 KHz */
-	if (!dev->is_em2800) {
+	if (!dev->board.is_em2800) {
 		retval = em28xx_write_regs_req(dev, 0x00, 0x06, "\x40", 1);
 		if (retval < 0) {
 			em28xx_errdev("%s: em28xx_write_regs_req failed! retval [%d]\n",
@@ -578,7 +578,7 @@ static void video_mux(struct em28xx *dev, int index)
 
 	em28xx_i2c_call_clients(dev, VIDIOC_INT_S_VIDEO_ROUTING, &route);
 
-	if (dev->has_msp34xx) {
+	if (dev->board.has_msp34xx) {
 		if (dev->i2s_speed) {
 			em28xx_i2c_call_clients(dev, VIDIOC_INT_I2S_CLOCK_FREQ,
 				&dev->i2s_speed);
@@ -752,7 +752,7 @@ static int vidioc_try_fmt_vid_cap(struct file *file, void *priv,
 
 	mutex_lock(&dev->lock);
 
-	if (dev->is_em2800) {
+	if (dev->board.is_em2800) {
 		/* the em2800 can only scale down to 50% */
 		if (height % (maxh / 2))
 			height = maxh;
@@ -1009,7 +1009,7 @@ static int vidioc_queryctrl(struct file *file, void *priv,
 
 	qc->id = id;
 
-	if (!dev->has_msp34xx) {
+	if (!dev->board.has_msp34xx) {
 		for (i = 0; i < ARRAY_SIZE(em28xx_qctrl); i++) {
 			if (qc->id && qc->id == em28xx_qctrl[i].id) {
 				memcpy(qc, &(em28xx_qctrl[i]), sizeof(*qc));
@@ -1039,7 +1039,7 @@ static int vidioc_g_ctrl(struct file *file, void *priv,
 		return rc;
 	mutex_lock(&dev->lock);
 
-	if (!dev->has_msp34xx)
+	if (!dev->board.has_msp34xx)
 		rc = em28xx_get_ctrl(dev, ctrl);
 	else
 		rc = -EINVAL;
@@ -1067,7 +1067,7 @@ static int vidioc_s_ctrl(struct file *file, void *priv,
 
 	mutex_lock(&dev->lock);
 
-	if (dev->has_msp34xx)
+	if (dev->board.has_msp34xx)
 		em28xx_i2c_call_clients(dev, VIDIOC_S_CTRL, ctrl);
 	else {
 		rc = 1;
@@ -2103,7 +2103,7 @@ static int em28xx_init_dev(struct em28xx **devhandle, struct usb_device *udev,
 	dev->em28xx_read_reg_req_len = em28xx_read_reg_req_len;
 	dev->em28xx_write_regs_req = em28xx_write_regs_req;
 	dev->em28xx_read_reg_req = em28xx_read_reg_req;
-	dev->is_em2800 = em28xx_boards[dev->model].is_em2800;
+	dev->board.is_em2800 = em28xx_boards[dev->model].is_em2800;
 
 	em28xx_pre_card_setup(dev);
 
@@ -2163,7 +2163,7 @@ static int em28xx_init_dev(struct em28xx **devhandle, struct usb_device *udev,
 	video_set_drvdata(dev->vbi_dev, dev);
 #endif
 
-	if (dev->has_msp34xx) {
+	if (dev->board.has_msp34xx) {
 		/* Send a reset to other chips via gpio */
 		errCode = em28xx_write_regs_req(dev, 0x00, 0x08, "\xf7", 1);
 		if (errCode < 0) {
@@ -2205,8 +2205,6 @@ static int em28xx_init_dev(struct em28xx **devhandle, struct usb_device *udev,
 
 	return 0;
 
-fail_unreg:
-	em28xx_release_resources(dev);
 fail_reg_devices:
 	mutex_unlock(&dev->lock);
 	return retval;
@@ -2229,7 +2227,7 @@ static void request_module_async(struct work_struct *work)
 	else if (dev->has_alsa_audio)
 		request_module("em28xx-alsa");
 
-	if (dev->has_dvb)
+	if (dev->board.has_dvb)
 		request_module("em28xx-dvb");
 }
 
@@ -2356,7 +2354,7 @@ static int em28xx_usb_probe(struct usb_interface *interface,
 	uif = udev->actconfig->interface[0];
 
 	dev->num_alt = uif->num_altsetting;
-	em28xx_info("Alternate settings: %i\n", dev->num_alt);
+	em28xx_videodbg("Alternate settings: %i\n", dev->num_alt);
 /*	dev->alt_max_pkt_size = kmalloc(sizeof(*dev->alt_max_pkt_size)* */
 	dev->alt_max_pkt_size = kmalloc(32 * dev->num_alt, GFP_KERNEL);
 
@@ -2372,7 +2370,7 @@ static int em28xx_usb_probe(struct usb_interface *interface,
 							wMaxPacketSize);
 		dev->alt_max_pkt_size[i] =
 		    (tmp & 0x07ff) * (((tmp & 0x1800) >> 11) + 1);
-		em28xx_info("Alternate setting %i, max size= %i\n", i,
+		em28xx_videodbg("Alternate setting %i, max size= %i\n", i,
 						dev->alt_max_pkt_size[i]);
 	}
 
@@ -2388,8 +2386,6 @@ static int em28xx_usb_probe(struct usb_interface *interface,
 		return retval;
 	}
 
-	em28xx_info("Found %s\n", em28xx_boards[dev->model].name);
-
 	/* save our data pointer in this interface device */
 	usb_set_intfdata(interface, dev);