summaryrefslogtreecommitdiff
path: root/linux/drivers/media/video/em28xx
diff options
context:
space:
mode:
Diffstat (limited to 'linux/drivers/media/video/em28xx')
-rw-r--r--linux/drivers/media/video/em28xx/em28xx-audio.c5
-rw-r--r--linux/drivers/media/video/em28xx/em28xx-cards.c257
-rw-r--r--linux/drivers/media/video/em28xx/em28xx-core.c56
-rw-r--r--linux/drivers/media/video/em28xx/em28xx-dvb.c21
-rw-r--r--linux/drivers/media/video/em28xx/em28xx-i2c.c27
-rw-r--r--linux/drivers/media/video/em28xx/em28xx-input.c14
-rw-r--r--linux/drivers/media/video/em28xx/em28xx-reg.h16
-rw-r--r--linux/drivers/media/video/em28xx/em28xx-video.c38
-rw-r--r--linux/drivers/media/video/em28xx/em28xx.h9
9 files changed, 373 insertions, 70 deletions
diff --git a/linux/drivers/media/video/em28xx/em28xx-audio.c b/linux/drivers/media/video/em28xx/em28xx-audio.c
index 089764d42..66aace7cf 100644
--- a/linux/drivers/media/video/em28xx/em28xx-audio.c
+++ b/linux/drivers/media/video/em28xx/em28xx-audio.c
@@ -385,6 +385,11 @@ static int snd_em28xx_pcm_close(struct snd_pcm_substream *substream)
mutex_lock(&dev->lock);
dev->adev.users--;
em28xx_audio_analog_set(dev);
+ if (substream->runtime->dma_area) {
+ dprintk("freeing\n");
+ vfree(substream->runtime->dma_area);
+ substream->runtime->dma_area = NULL;
+ }
mutex_unlock(&dev->lock);
return 0;
diff --git a/linux/drivers/media/video/em28xx/em28xx-cards.c b/linux/drivers/media/video/em28xx/em28xx-cards.c
index fb83e4f6e..b824eed46 100644
--- a/linux/drivers/media/video/em28xx/em28xx-cards.c
+++ b/linux/drivers/media/video/em28xx/em28xx-cards.c
@@ -50,6 +50,11 @@ static unsigned int disable_ir;
module_param(disable_ir, int, 0444);
MODULE_PARM_DESC(disable_ir, "disable infrared remote support");
+static unsigned int disable_usb_speed_check;
+module_param(disable_usb_speed_check, int, 0444);
+MODULE_PARM_DESC(disable_usb_speed_check,
+ "override min bandwidth requirement of 480M bps");
+
static unsigned int card[] = {[0 ... (EM28XX_MAXBOARDS - 1)] = UNSET };
module_param_array(card, int, NULL, 0444);
MODULE_PARM_DESC(card, "card type");
@@ -117,6 +122,24 @@ static struct em28xx_reg_seq em2870_kworld_355u_digital[] = {
};
#endif
+/* Board - EM2882 Kworld 315U digital */
+static struct em28xx_reg_seq em2882_kworld_315u_digital[] = {
+ {EM28XX_R08_GPIO, 0xff, 0xff, 10},
+ {EM28XX_R08_GPIO, 0xfe, 0xff, 10},
+ {EM2880_R04_GPO, 0x04, 0xff, 10},
+ {EM2880_R04_GPO, 0x0c, 0xff, 10},
+ {EM28XX_R08_GPIO, 0x7e, 0xff, 10},
+ { -1, -1, -1, -1},
+};
+
+static struct em28xx_reg_seq em2882_kworld_315u_tuner_gpio[] = {
+ {EM2880_R04_GPO, 0x08, 0xff, 10},
+ {EM2880_R04_GPO, 0x0c, 0xff, 10},
+ {EM2880_R04_GPO, 0x08, 0xff, 10},
+ {EM2880_R04_GPO, 0x0c, 0xff, 10},
+ { -1, -1, -1, -1},
+};
+
static struct em28xx_reg_seq kworld_330u_analog[] = {
{EM28XX_R08_GPIO, 0x6d, ~EM_GPIO_4, 10},
{EM2880_R04_GPO, 0x00, 0xff, 10},
@@ -129,6 +152,24 @@ static struct em28xx_reg_seq kworld_330u_digital[] = {
{ -1, -1, -1, -1},
};
+/* Evga inDtube
+ GPIO0 - Enable digital power (s5h1409) - low to enable
+ GPIO1 - Enable analog power (tvp5150/emp202) - low to enable
+ GPIO4 - xc3028 reset
+ GOP3 - s5h1409 reset
+ */
+static struct em28xx_reg_seq evga_indtube_analog[] = {
+ {EM28XX_R08_GPIO, 0x79, 0xff, 60},
+ { -1, -1, -1, -1},
+};
+
+static struct em28xx_reg_seq evga_indtube_digital[] = {
+ {EM28XX_R08_GPIO, 0x7a, 0xff, 1},
+ {EM2880_R04_GPO, 0x04, 0xff, 10},
+ {EM2880_R04_GPO, 0x0c, 0xff, 1},
+ { -1, -1, -1, -1},
+};
+
/* Callback for the most boards */
static struct em28xx_reg_seq default_tuner_gpio[] = {
{EM28XX_R08_GPIO, EM_GPIO_4, EM_GPIO_4, 10},
@@ -153,6 +194,16 @@ static struct em28xx_reg_seq compro_mute_gpio[] = {
{ -1, -1, -1, -1},
};
+/* Terratec AV350 */
+static struct em28xx_reg_seq terratec_av350_mute_gpio[] = {
+ {EM28XX_R08_GPIO, 0xff, 0x7f, 10},
+ { -1, -1, -1, -1},
+};
+
+static struct em28xx_reg_seq terratec_av350_unmute_gpio[] = {
+ {EM28XX_R08_GPIO, 0xff, 0xff, 10},
+ { -1, -1, -1, -1},
+};
/*
* Board definitions
*/
@@ -1033,16 +1084,17 @@ struct em28xx_board em28xx_boards[] = {
.amux = EM28XX_AMUX_LINE_IN,
} },
},
- [EM2860_BOARD_POINTNIX_INTRAORAL_CAMERA] = {
- .name = "PointNix Intra-Oral Camera",
+ [EM2860_BOARD_SAA711X_REFERENCE_DESIGN] = {
+ .name = "EM2860/SAA711X Reference Design",
.has_snapshot_button = 1,
- .tda9887_conf = TDA9887_PRESENT,
.tuner_type = TUNER_ABSENT,
.decoder = EM28XX_SAA711X,
.input = { {
.type = EM28XX_VMUX_SVIDEO,
.vmux = SAA7115_SVIDEO3,
- .amux = EM28XX_AMUX_VIDEO,
+ }, {
+ .type = EM28XX_VMUX_COMPOSITE1,
+ .vmux = SAA7115_COMPOSITE0,
} },
},
[EM2880_BOARD_MSI_DIGIVOX_AD] = {
@@ -1144,6 +1196,38 @@ struct em28xx_board em28xx_boards[] = {
.gpio = default_analog,
} },
},
+ [EM2882_BOARD_KWORLD_ATSC_315U] = {
+ .name = "KWorld ATSC 315U HDTV TV Box",
+ .valid = EM28XX_BOARD_NOT_VALIDATED,
+ .tuner_type = TUNER_THOMSON_DTT761X,
+ .tuner_gpio = em2882_kworld_315u_tuner_gpio,
+ .tda9887_conf = TDA9887_PRESENT,
+ .decoder = EM28XX_SAA711X,
+ .has_dvb = 1,
+ .dvb_gpio = em2882_kworld_315u_digital,
+ .xclk = EM28XX_XCLK_FREQUENCY_12MHZ,
+ .i2c_speed = EM28XX_I2C_CLK_WAIT_ENABLE,
+ /* Analog mode - still not ready */
+ /*.input = { {
+ .type = EM28XX_VMUX_TELEVISION,
+ .vmux = SAA7115_COMPOSITE2,
+ .amux = EM28XX_AMUX_VIDEO,
+ .gpio = em2882_kworld_315u_analog,
+ .aout = EM28XX_AOUT_PCM_IN | EM28XX_AOUT_PCM_STEREO,
+ }, {
+ .type = EM28XX_VMUX_COMPOSITE1,
+ .vmux = SAA7115_COMPOSITE0,
+ .amux = EM28XX_AMUX_LINE_IN,
+ .gpio = em2882_kworld_315u_analog1,
+ .aout = EM28XX_AOUT_PCM_IN | EM28XX_AOUT_PCM_STEREO,
+ }, {
+ .type = EM28XX_VMUX_SVIDEO,
+ .vmux = SAA7115_SVIDEO3,
+ .amux = EM28XX_AMUX_LINE_IN,
+ .gpio = em2882_kworld_315u_analog1,
+ .aout = EM28XX_AOUT_PCM_IN | EM28XX_AOUT_PCM_STEREO,
+ } }, */
+ },
[EM2880_BOARD_EMPIRE_DUAL_TV] = {
.name = "Empire dual TV",
.tuner_type = TUNER_XC2028,
@@ -1412,6 +1496,69 @@ struct em28xx_board em28xx_boards[] = {
.amux = EM28XX_AMUX_VIDEO,
} },
},
+ [EM2860_BOARD_TERRATEC_GRABBY] = {
+ .name = "Terratec Grabby",
+ .vchannels = 2,
+ .tuner_type = TUNER_ABSENT,
+ .decoder = EM28XX_SAA711X,
+ .xclk = EM28XX_XCLK_FREQUENCY_12MHZ,
+ .input = { {
+ .type = EM28XX_VMUX_COMPOSITE1,
+ .vmux = SAA7115_COMPOSITE0,
+ .amux = EM28XX_AMUX_VIDEO2,
+ }, {
+ .type = EM28XX_VMUX_SVIDEO,
+ .vmux = SAA7115_SVIDEO3,
+ .amux = EM28XX_AMUX_VIDEO2,
+ } },
+ },
+ [EM2860_BOARD_TERRATEC_AV350] = {
+ .name = "Terratec AV350",
+ .vchannels = 2,
+ .tuner_type = TUNER_ABSENT,
+ .decoder = EM28XX_TVP5150,
+ .xclk = EM28XX_XCLK_FREQUENCY_12MHZ,
+ .mute_gpio = terratec_av350_mute_gpio,
+ .input = { {
+ .type = EM28XX_VMUX_COMPOSITE1,
+ .vmux = TVP5150_COMPOSITE1,
+ .amux = EM28XX_AUDIO_SRC_LINE,
+ .gpio = terratec_av350_unmute_gpio,
+
+ }, {
+ .type = EM28XX_VMUX_SVIDEO,
+ .vmux = TVP5150_SVIDEO,
+ .amux = EM28XX_AUDIO_SRC_LINE,
+ .gpio = terratec_av350_unmute_gpio,
+ } },
+ },
+ [EM2882_BOARD_EVGA_INDTUBE] = {
+ .name = "Evga inDtube",
+ .tuner_type = TUNER_XC2028,
+ .tuner_gpio = default_tuner_gpio,
+ .decoder = EM28XX_TVP5150,
+ .xclk = EM28XX_XCLK_FREQUENCY_12MHZ, /* NEC IR */
+ .mts_firmware = 1,
+ .has_dvb = 1,
+ .dvb_gpio = evga_indtube_digital,
+ .ir_codes = ir_codes_evga_indtube,
+ .input = { {
+ .type = EM28XX_VMUX_TELEVISION,
+ .vmux = TVP5150_COMPOSITE0,
+ .amux = EM28XX_AMUX_VIDEO,
+ .gpio = evga_indtube_analog,
+ }, {
+ .type = EM28XX_VMUX_COMPOSITE1,
+ .vmux = TVP5150_COMPOSITE1,
+ .amux = EM28XX_AMUX_LINE_IN,
+ .gpio = evga_indtube_analog,
+ }, {
+ .type = EM28XX_VMUX_SVIDEO,
+ .vmux = TVP5150_SVIDEO,
+ .amux = EM28XX_AMUX_LINE_IN,
+ .gpio = evga_indtube_analog,
+ } },
+ },
};
const unsigned int em28xx_bcount = ARRAY_SIZE(em28xx_boards);
@@ -1449,6 +1596,8 @@ struct usb_device_id em28xx_id_table[] = {
{ USB_DEVICE(0xeb1a, 0xe310),
.driver_info = EM2880_BOARD_KWORLD_DVB_310U },
#endif
+ { USB_DEVICE(0xeb1a, 0xa313),
+ .driver_info = EM2882_BOARD_KWORLD_ATSC_315U },
{ USB_DEVICE(0xeb1a, 0xa316),
.driver_info = EM2883_BOARD_KWORLD_HYBRID_330U },
{ USB_DEVICE(0xeb1a, 0xe320),
@@ -1479,6 +1628,10 @@ struct usb_device_id em28xx_id_table[] = {
.driver_info = EM2870_BOARD_TERRATEC_XS },
{ USB_DEVICE(0x0ccd, 0x0047),
.driver_info = EM2880_BOARD_TERRATEC_PRODIGY_XS },
+ { USB_DEVICE(0x0ccd, 0x0084),
+ .driver_info = EM2860_BOARD_TERRATEC_AV350 },
+ { USB_DEVICE(0x0ccd, 0x0096),
+ .driver_info = EM2860_BOARD_TERRATEC_GRABBY },
{ USB_DEVICE(0x185b, 0x2870),
.driver_info = EM2870_BOARD_COMPRO_VIDEOMATE },
{ USB_DEVICE(0x185b, 0x2041),
@@ -1532,13 +1685,14 @@ static struct em28xx_hash_table em28xx_eeprom_hash[] = {
{0x72cc5a8b, EM2820_BOARD_PROLINK_PLAYTV_BOX4_USB2, TUNER_YMEC_TVF_5533MF},
{0x966a0441, EM2880_BOARD_KWORLD_DVB_310U, TUNER_XC2028},
{0x9567eb1a, EM2880_BOARD_EMPIRE_DUAL_TV, TUNER_XC2028},
+ {0xcee44a99, EM2882_BOARD_EVGA_INDTUBE, TUNER_XC2028},
};
/* I2C devicelist hash table for devices with generic USB IDs */
static struct em28xx_hash_table em28xx_i2c_hash[] = {
{0xb06a32c3, EM2800_BOARD_TERRATEC_CINERGY_200, TUNER_LG_PAL_NEW_TAPC},
{0xf51200e3, EM2800_BOARD_VGEAR_POCKETTV, TUNER_LG_PAL_NEW_TAPC},
- {0x1ba50080, EM2860_BOARD_POINTNIX_INTRAORAL_CAMERA, TUNER_ABSENT},
+ {0x1ba50080, EM2860_BOARD_SAA711X_REFERENCE_DESIGN, TUNER_ABSENT},
{0xc51200e3, EM2820_BOARD_GADMEI_TVR200, TUNER_LG_PAL_NEW_TAPC},
};
@@ -1714,6 +1868,17 @@ void em28xx_pre_card_setup(struct em28xx *dev)
em28xx_write_reg(dev, EM28XX_R08_GPIO, 0xfd);
break;
+ case EM2882_BOARD_KWORLD_ATSC_315U:
+ em28xx_write_reg(dev, EM28XX_R08_GPIO, 0xff);
+ msleep(10);
+ em28xx_write_reg(dev, EM28XX_R08_GPIO, 0xfe);
+ msleep(10);
+ em28xx_write_reg(dev, EM2880_R04_GPO, 0x00);
+ msleep(10);
+ em28xx_write_reg(dev, EM2880_R04_GPO, 0x08);
+ msleep(10);
+ break;
+
case EM2860_BOARD_KAIOMY_TVNPC_U2:
em28xx_write_regs(dev, EM28XX_R0F_XCLK, "\x07", 1);
em28xx_write_regs(dev, EM28XX_R06_I2C_CLK, "\x40", 1);
@@ -1784,6 +1949,10 @@ static void em28xx_setup_xc3028(struct em28xx *dev, struct xc2028_ctrl *ctl)
ctl->demod = XC3028_FE_CHINA;
ctl->fname = XC2028_DEFAULT_FIRMWARE;
break;
+ case EM2882_BOARD_EVGA_INDTUBE:
+ ctl->demod = XC3028_FE_CHINA;
+ ctl->fname = XC3028L_DEFAULT_FIRMWARE;
+ break;
default:
ctl->demod = XC3028_FE_OREN538;
}
@@ -1931,12 +2100,31 @@ static int em28xx_hint_board(struct em28xx *dev)
}
/* ----------------------------------------------------------------------- */
+#if LINUX_VERSION_CODE < KERNEL_VERSION(2, 6, 30)
void em28xx_set_ir(struct em28xx *dev, struct IR_i2c *ir)
+#else
+void em28xx_register_i2c_ir(struct em28xx *dev)
+#endif
{
+#if LINUX_VERSION_CODE < KERNEL_VERSION(2, 6, 30)
if (disable_ir) {
ir->get_key = NULL;
return ;
}
+#else
+ struct i2c_board_info info;
+ struct IR_i2c_init_data init_data;
+ const unsigned short addr_list[] = {
+ 0x30, 0x47, I2C_CLIENT_END
+ };
+
+ if (disable_ir)
+ return;
+
+ memset(&info, 0, sizeof(struct i2c_board_info));
+ memset(&init_data, 0, sizeof(struct IR_i2c_init_data));
+ strlcpy(info.type, "ir_video", I2C_NAME_SIZE);
+#endif
/* detect & configure */
switch (dev->model) {
@@ -1946,22 +2134,40 @@ void em28xx_set_ir(struct em28xx *dev, struct IR_i2c *ir)
break;
case (EM2800_BOARD_TERRATEC_CINERGY_200):
case (EM2820_BOARD_TERRATEC_CINERGY_250):
+#if LINUX_VERSION_CODE < KERNEL_VERSION(2, 6, 30)
ir->ir_codes = ir_codes_em_terratec;
ir->get_key = em28xx_get_key_terratec;
- snprintf(ir->c.name, sizeof(ir->c.name),
+ snprintf(ir->name, sizeof(ir->name),
"i2c IR (EM28XX Terratec)");
+#else
+ init_data.ir_codes = ir_codes_em_terratec;
+ init_data.get_key = em28xx_get_key_terratec;
+ init_data.name = "i2c IR (EM28XX Terratec)";
+#endif
break;
case (EM2820_BOARD_PINNACLE_USB_2):
+#if LINUX_VERSION_CODE < KERNEL_VERSION(2, 6, 30)
ir->ir_codes = ir_codes_pinnacle_grey;
ir->get_key = em28xx_get_key_pinnacle_usb_grey;
- snprintf(ir->c.name, sizeof(ir->c.name),
+ snprintf(ir->name, sizeof(ir->name),
"i2c IR (EM28XX Pinnacle PCTV)");
+#else
+ init_data.ir_codes = ir_codes_pinnacle_grey;
+ init_data.get_key = em28xx_get_key_pinnacle_usb_grey;
+ init_data.name = "i2c IR (EM28XX Pinnacle PCTV)";
+#endif
break;
case (EM2820_BOARD_HAUPPAUGE_WINTV_USB_2):
+#if LINUX_VERSION_CODE < KERNEL_VERSION(2, 6, 30)
ir->ir_codes = ir_codes_hauppauge_new;
ir->get_key = em28xx_get_key_em_haup;
- snprintf(ir->c.name, sizeof(ir->c.name),
+ snprintf(ir->name, sizeof(ir->name),
"i2c IR (EM2840 Hauppauge)");
+#else
+ init_data.ir_codes = ir_codes_hauppauge_new;
+ init_data.get_key = em28xx_get_key_em_haup;
+ init_data.name = "i2c IR (EM2840 Hauppauge)";
+#endif
break;
case (EM2820_BOARD_MSI_VOX_USB_2):
break;
@@ -1972,6 +2178,12 @@ void em28xx_set_ir(struct em28xx *dev, struct IR_i2c *ir)
case (EM2800_BOARD_GRABBEEX_USB2800):
break;
}
+#if LINUX_VERSION_CODE >= KERNEL_VERSION(2, 6, 30)
+
+ if (init_data.name)
+ info.platform_data = &init_data;
+ i2c_new_probed_device(&dev->i2c_adap, &info, addr_list);
+#endif
}
void em28xx_card_setup(struct em28xx *dev)
@@ -1982,6 +2194,9 @@ void em28xx_card_setup(struct em28xx *dev)
if (em28xx_boards[dev->model].tuner_addr)
dev->tuner_addr = em28xx_boards[dev->model].tuner_addr;
+ if (em28xx_boards[dev->model].tda9887_conf)
+ dev->tda9887_conf = em28xx_boards[dev->model].tda9887_conf;
+
/* request some modules */
switch (dev->model) {
case EM2820_BOARD_HAUPPAUGE_WINTV_USB_2:
@@ -2011,6 +2226,12 @@ void em28xx_card_setup(struct em28xx *dev)
#endif
break;
}
+ case EM2882_BOARD_KWORLD_ATSC_315U:
+ em28xx_write_reg(dev, 0x0d, 0x42);
+ msleep(10);
+ em28xx_write_reg(dev, EM28XX_R08_GPIO, 0xfd);
+ msleep(10);
+ break;
case EM2820_BOARD_KWORLD_PVRTV2800RF:
/* GPIO enables sound on KWORLD PVR TV 2800RF */
em28xx_write_reg(dev, EM28XX_R08_GPIO, 0xf9);
@@ -2033,6 +2254,12 @@ void em28xx_card_setup(struct em28xx *dev)
case EM2880_BOARD_MSI_DIGIVOX_AD:
if (!em28xx_hint_board(dev))
em28xx_set_model(dev);
+
+ /* In cases where we had to use a board hint, the call to
+ em28xx_set_mode() in em28xx_pre_card_setup() was a no-op,
+ so make the call now so the analog GPIOs are set properly
+ before probing the i2c bus. */
+ em28xx_set_mode(dev, EM28XX_ANALOG_MODE);
break;
}
@@ -2389,6 +2616,20 @@ static int em28xx_usb_probe(struct usb_interface *interface,
ifnum,
interface->altsetting->desc.bInterfaceNumber);
+ /*
+ * Make sure we have 480 Mbps of bandwidth, otherwise things like
+ * video stream wouldn't likely work, since 12 Mbps is generally
+ * not enough even for most Digital TV streams.
+ */
+ if (udev->speed != USB_SPEED_HIGH && disable_usb_speed_check == 0) {
+ printk(DRIVER_NAME ": Device initialization failed.\n");
+ printk(DRIVER_NAME ": Device must be connected to a high-speed"
+ " USB 2.0 port.\n");
+ em28xx_devused &= ~(1<<nr);
+ retval = -ENODEV;
+ goto err;
+ }
+
if (nr >= EM28XX_MAXBOARDS) {
printk(DRIVER_NAME ": Supports only %i em28xx boards.\n",
EM28XX_MAXBOARDS);
diff --git a/linux/drivers/media/video/em28xx/em28xx-core.c b/linux/drivers/media/video/em28xx/em28xx-core.c
index 401dc4e39..2bce72e4f 100644
--- a/linux/drivers/media/video/em28xx/em28xx-core.c
+++ b/linux/drivers/media/video/em28xx/em28xx-core.c
@@ -500,18 +500,21 @@ int em28xx_audio_setup(struct em28xx *dev)
/* See how this device is configured */
cfg = em28xx_read_reg(dev, EM28XX_R00_CHIPCFG);
- if (cfg < 0)
+ em28xx_info("Config register raw data: 0x%02x\n", cfg);
+ if (cfg < 0) {
+ /* Register read error? */
cfg = EM28XX_CHIPCFG_AC97; /* Be conservative */
- else
- em28xx_info("Config register raw data: 0x%02x\n", cfg);
-
- if ((cfg & EM28XX_CHIPCFG_AUDIOMASK) ==
- EM28XX_CHIPCFG_I2S_3_SAMPRATES) {
+ } else if ((cfg & EM28XX_CHIPCFG_AUDIOMASK) == 0x00) {
+ /* The device doesn't have vendor audio at all */
+ dev->has_alsa_audio = 0;
+ dev->audio_mode.has_audio = 0;
+ return 0;
+ } else if ((cfg & EM28XX_CHIPCFG_AUDIOMASK) ==
+ EM28XX_CHIPCFG_I2S_3_SAMPRATES) {
em28xx_info("I2S Audio (3 sample rates)\n");
dev->audio_mode.i2s_3rates = 1;
- }
- if ((cfg & EM28XX_CHIPCFG_AUDIOMASK) ==
- EM28XX_CHIPCFG_I2S_5_SAMPRATES) {
+ } else if ((cfg & EM28XX_CHIPCFG_AUDIOMASK) ==
+ EM28XX_CHIPCFG_I2S_5_SAMPRATES) {
em28xx_info("I2S Audio (5 sample rates)\n");
dev->audio_mode.i2s_5rates = 1;
}
@@ -1021,6 +1024,41 @@ int em28xx_init_isoc(struct em28xx *dev, int max_packets,
}
EXPORT_SYMBOL_GPL(em28xx_init_isoc);
+/* Determine the packet size for the DVB stream for the given device
+ (underlying value programmed into the eeprom) */
+int em28xx_isoc_dvb_max_packetsize(struct em28xx *dev)
+{
+ unsigned int chip_cfg2;
+ unsigned int packet_size = 564;
+
+ if (dev->chip_id == CHIP_ID_EM2874) {
+ /* FIXME - for now assume 564 like it was before, but the
+ em2874 code should be added to return the proper value... */
+ packet_size = 564;
+ } else {
+ /* TS max packet size stored in bits 1-0 of R01 */
+ chip_cfg2 = em28xx_read_reg(dev, EM28XX_R01_CHIPCFG2);
+ switch (chip_cfg2 & EM28XX_CHIPCFG2_TS_PACKETSIZE_MASK) {
+ case EM28XX_CHIPCFG2_TS_PACKETSIZE_188:
+ packet_size = 188;
+ break;
+ case EM28XX_CHIPCFG2_TS_PACKETSIZE_376:
+ packet_size = 376;
+ break;
+ case EM28XX_CHIPCFG2_TS_PACKETSIZE_564:
+ packet_size = 564;
+ break;
+ case EM28XX_CHIPCFG2_TS_PACKETSIZE_752:
+ packet_size = 752;
+ break;
+ }
+ }
+
+ em28xx_coredbg("dvb max packet size=%d\n", packet_size);
+ return packet_size;
+}
+EXPORT_SYMBOL_GPL(em28xx_isoc_dvb_max_packetsize);
+
/*
* em28xx_wake_i2c()
* configure i2c attached devices
diff --git a/linux/drivers/media/video/em28xx/em28xx-dvb.c b/linux/drivers/media/video/em28xx/em28xx-dvb.c
index dd749442d..85afa0be0 100644
--- a/linux/drivers/media/video/em28xx/em28xx-dvb.c
+++ b/linux/drivers/media/video/em28xx/em28xx-dvb.c
@@ -26,6 +26,8 @@
#include "em28xx.h"
#include <media/v4l2-common.h>
#include <media/videobuf-vmalloc.h>
+#include <media/tuner.h>
+#include "tuner-simple.h"
#include "lgdt330x.h"
#include "zl10353.h"
@@ -47,7 +49,6 @@ if (debug >= level) \
} while (0)
#define EM28XX_DVB_NUM_BUFS 5
-#define EM28XX_DVB_MAX_PACKETSIZE 564
#define EM28XX_DVB_MAX_PACKETS 64
struct em28xx_dvb {
@@ -143,14 +144,17 @@ static int start_streaming(struct em28xx_dvb *dvb)
{
int rc;
struct em28xx *dev = dvb->adapter.priv;
+ int max_dvb_packet_size;
usb_set_interface(dev->udev, 0, 1);
rc = em28xx_set_mode(dev, EM28XX_DIGITAL_MODE);
if (rc < 0)
return rc;
+ max_dvb_packet_size = em28xx_isoc_dvb_max_packetsize(dev);
+
return em28xx_init_isoc(dev, EM28XX_DVB_MAX_PACKETS,
- EM28XX_DVB_NUM_BUFS, EM28XX_DVB_MAX_PACKETSIZE,
+ EM28XX_DVB_NUM_BUFS, max_dvb_packet_size,
dvb_isoc_copy);
}
@@ -442,6 +446,7 @@ static int dvb_init(struct em28xx *dev)
}
break;
case EM2883_BOARD_KWORLD_HYBRID_330U:
+ case EM2882_BOARD_EVGA_INDTUBE:
dvb->frontend = dvb_attach(s5h1409_attach,
&em28xx_s5h1409_with_xc3028,
&dev->i2c_adap);
@@ -450,6 +455,18 @@ static int dvb_init(struct em28xx *dev)
goto out_free;
}
break;
+ case EM2882_BOARD_KWORLD_ATSC_315U:
+ dvb->frontend = dvb_attach(lgdt330x_attach,
+ &em2880_lgdt3303_dev,
+ &dev->i2c_adap);
+ if (dvb->frontend != NULL) {
+ if (!dvb_attach(simple_tuner_attach, dvb->frontend,
+ &dev->i2c_adap, 0x61, TUNER_THOMSON_DTT761X)) {
+ result = -EINVAL;
+ goto out_free;
+ }
+ }
+ break;
case EM2880_BOARD_HAUPPAUGE_WINTV_HVR_900_R2:
#ifdef EM28XX_DRX397XD_SUPPORT
/* We don't have the config structure properly populated, so
diff --git a/linux/drivers/media/video/em28xx/em28xx-i2c.c b/linux/drivers/media/video/em28xx/em28xx-i2c.c
index 24456cebd..1cdd88361 100644
--- a/linux/drivers/media/video/em28xx/em28xx-i2c.c
+++ b/linux/drivers/media/video/em28xx/em28xx-i2c.c
@@ -451,27 +451,6 @@ static u32 functionality(struct i2c_adapter *adap)
return I2C_FUNC_SMBUS_EMUL;
}
-/*
- * attach_inform()
- * gets called when a device attaches to the i2c bus
- * does some basic configuration
- */
-static int attach_inform(struct i2c_client *client)
-{
- struct em28xx *dev = client->adapter->algo_data;
- struct IR_i2c *ir = i2c_get_clientdata(client);
-
- switch (client->addr << 1) {
- case 0x60:
- case 0x8e:
- dprintk1(1, "attach_inform: IR detected (%s).\n", ir->phys);
- em28xx_set_ir(dev, ir);
- break;
- }
-
- return 0;
-}
-
static struct i2c_algorithm em28xx_algo = {
.master_xfer = em28xx_i2c_xfer,
.functionality = functionality,
@@ -488,7 +467,6 @@ static struct i2c_adapter em28xx_adap_template = {
.name = "em28xx",
.id = I2C_HW_B_EM28XX,
.algo = &em28xx_algo,
- .client_register = attach_inform,
};
static struct i2c_client em28xx_client_template = {
@@ -581,6 +559,11 @@ int em28xx_i2c_register(struct em28xx *dev)
if (i2c_scan)
em28xx_do_i2c_scan(dev);
+#if LINUX_VERSION_CODE >= KERNEL_VERSION(2, 6, 30)
+ /* Instantiate the IR receiver device, if present */
+ em28xx_register_i2c_ir(dev);
+
+#endif
return 0;
}
diff --git a/linux/drivers/media/video/em28xx/em28xx-input.c b/linux/drivers/media/video/em28xx/em28xx-input.c
index 5382a6064..df58b4c5b 100644
--- a/linux/drivers/media/video/em28xx/em28xx-input.c
+++ b/linux/drivers/media/video/em28xx/em28xx-input.c
@@ -41,7 +41,7 @@ MODULE_PARM_DESC(ir_debug, "enable debug messages [IR]");
#define i2cdprintk(fmt, arg...) \
if (ir_debug) { \
- printk(KERN_DEBUG "%s/ir: " fmt, ir->c.name , ## arg); \
+ printk(KERN_DEBUG "%s/ir: " fmt, ir->name , ## arg); \
}
#define dprintk(fmt, arg...) \
@@ -86,7 +86,11 @@ int em28xx_get_key_terratec(struct IR_i2c *ir, u32 *ir_key, u32 *ir_raw)
unsigned char b;
/* poll IR chip */
+#if LINUX_VERSION_CODE < KERNEL_VERSION(2, 6, 30)
if (1 != i2c_master_recv(&ir->c, &b, 1)) {
+#else
+ if (1 != i2c_master_recv(ir->c, &b, 1)) {
+#endif
i2cdprintk("read error\n");
return -EIO;
}
@@ -115,7 +119,11 @@ int em28xx_get_key_em_haup(struct IR_i2c *ir, u32 *ir_key, u32 *ir_raw)
unsigned char code;
/* poll IR chip */
+#if LINUX_VERSION_CODE < KERNEL_VERSION(2, 6, 30)
if (2 != i2c_master_recv(&ir->c, buf, 2))
+#else
+ if (2 != i2c_master_recv(ir->c, buf, 2))
+#endif
return -EIO;
/* Does eliminate repeated parity code */
@@ -153,7 +161,11 @@ int em28xx_get_key_pinnacle_usb_grey(struct IR_i2c *ir, u32 *ir_key,
/* poll IR chip */
+#if LINUX_VERSION_CODE < KERNEL_VERSION(2, 6, 30)
if (3 != i2c_master_recv(&ir->c, buf, 3)) {
+#else
+ if (3 != i2c_master_recv(ir->c, buf, 3)) {
+#endif
i2cdprintk("read error\n");
return -EIO;
}
diff --git a/linux/drivers/media/video/em28xx/em28xx-reg.h b/linux/drivers/media/video/em28xx/em28xx-reg.h
index 24e39c568..a2676d63c 100644
--- a/linux/drivers/media/video/em28xx/em28xx-reg.h
+++ b/linux/drivers/media/video/em28xx/em28xx-reg.h
@@ -27,6 +27,22 @@
#define EM28XX_CHIPCFG_AC97 0x10
#define EM28XX_CHIPCFG_AUDIOMASK 0x30
+#define EM28XX_R01_CHIPCFG2 0x01
+
+/* em28xx Chip Configuration 2 0x01 */
+#define EM28XX_CHIPCFG2_TS_PRESENT 0x10
+#define EM28XX_CHIPCFG2_TS_REQ_INTERVAL_MASK 0x0c /* bits 3-2 */
+#define EM28XX_CHIPCFG2_TS_REQ_INTERVAL_1MF 0x00
+#define EM28XX_CHIPCFG2_TS_REQ_INTERVAL_2MF 0x04
+#define EM28XX_CHIPCFG2_TS_REQ_INTERVAL_4MF 0x08
+#define EM28XX_CHIPCFG2_TS_REQ_INTERVAL_8MF 0x0c
+#define EM28XX_CHIPCFG2_TS_PACKETSIZE_MASK 0x03 /* bits 0-1 */
+#define EM28XX_CHIPCFG2_TS_PACKETSIZE_188 0x00
+#define EM28XX_CHIPCFG2_TS_PACKETSIZE_376 0x01
+#define EM28XX_CHIPCFG2_TS_PACKETSIZE_564 0x02
+#define EM28XX_CHIPCFG2_TS_PACKETSIZE_752 0x03
+
+
/* GPIO/GPO registers */
#define EM2880_R04_GPO 0x04 /* em2880-em2883 only */
#define EM28XX_R08_GPIO 0x08 /* em2820 or upper */
diff --git a/linux/drivers/media/video/em28xx/em28xx-video.c b/linux/drivers/media/video/em28xx/em28xx-video.c
index 1614e5fc4..63d21698c 100644
--- a/linux/drivers/media/video/em28xx/em28xx-video.c
+++ b/linux/drivers/media/video/em28xx/em28xx-video.c
@@ -691,8 +691,8 @@ static int vidioc_try_fmt_vid_cap(struct file *file, void *priv,
{
struct em28xx_fh *fh = priv;
struct em28xx *dev = fh->dev;
- int width = f->fmt.pix.width;
- int height = f->fmt.pix.height;
+ unsigned int width = f->fmt.pix.width;
+ unsigned int height = f->fmt.pix.height;
unsigned int maxw = norm_maxw(dev);
unsigned int maxh = norm_maxh(dev);
unsigned int hscale, vscale;
@@ -705,34 +705,20 @@ static int vidioc_try_fmt_vid_cap(struct file *file, void *priv,
return -EINVAL;
}
- /* width must even because of the YUYV format
- height must be even because of interlacing */
- height &= 0xfffe;
- width &= 0xfffe;
-
- if (unlikely(height < 32))
- height = 32;
- if (unlikely(height > maxh))
- height = maxh;
- if (unlikely(width < 48))
- width = 48;
- if (unlikely(width > maxw))
- width = maxw;
-
if (dev->board.is_em2800) {
/* the em2800 can only scale down to 50% */
- if (height % (maxh / 2))
- height = maxh;
- if (width % (maxw / 2))
- width = maxw;
- /* according to empiatech support */
- /* the MaxPacketSize is to small to support */
- /* framesizes larger than 640x480 @ 30 fps */
- /* or 640x576 @ 25 fps. As this would cut */
- /* of a part of the image we prefer */
- /* 360x576 or 360x480 for now */
+ height = height > (3 * maxh / 4) ? maxh : maxh / 2;
+ width = width > (3 * maxw / 4) ? maxw : maxw / 2;
+ /* According to empiatech support the MaxPacketSize is too small
+ * to support framesizes larger than 640x480 @ 30 fps or 640x576
+ * @ 25 fps. As this would cut of a part of the image we prefer
+ * 360x576 or 360x480 for now */
if (width == maxw && height == maxh)
width /= 2;
+ } else {
+ /* width must even because of the YUYV format
+ height must be even because of interlacing */
+ v4l_bound_align_image(&width, 48, maxw, 1, &height, 32, maxh, 1, 0);
}
get_scale(dev, width, height, &hscale, &vscale);
diff --git a/linux/drivers/media/video/em28xx/em28xx.h b/linux/drivers/media/video/em28xx/em28xx.h
index 966a3b924..6fb890efa 100644
--- a/linux/drivers/media/video/em28xx/em28xx.h
+++ b/linux/drivers/media/video/em28xx/em28xx.h
@@ -59,7 +59,7 @@
#define EM2883_BOARD_HAUPPAUGE_WINTV_HVR_950 16
#define EM2880_BOARD_PINNACLE_PCTV_HD_PRO 17
#define EM2880_BOARD_HAUPPAUGE_WINTV_HVR_900_R2 18
-#define EM2860_BOARD_POINTNIX_INTRAORAL_CAMERA 19
+#define EM2860_BOARD_SAA711X_REFERENCE_DESIGN 19
#define EM2880_BOARD_AMD_ATI_TV_WONDER_HD_600 20
#define EM2800_BOARD_GRABBEEX_USB2800 21
#define EM2750_BOARD_UNKNOWN 22
@@ -104,6 +104,10 @@
#define EM2860_BOARD_EASYCAP 64
#define EM2820_BOARD_IODATA_GVMVP_SZ 65
#define EM2880_BOARD_EMPIRE_DUAL_TV 66
+#define EM2860_BOARD_TERRATEC_GRABBY 67
+#define EM2860_BOARD_TERRATEC_AV350 68
+#define EM2882_BOARD_KWORLD_ATSC_315U 69
+#define EM2882_BOARD_EVGA_INDTUBE 70
/* Limits minimum and default number of buffers */
#define EM28XX_MIN_BUF 4
@@ -625,6 +629,7 @@ int em28xx_init_isoc(struct em28xx *dev, int max_packets,
int num_bufs, int max_pkt_size,
int (*isoc_copy) (struct em28xx *dev, struct urb *urb));
void em28xx_uninit_isoc(struct em28xx *dev);
+int em28xx_isoc_dvb_max_packetsize(struct em28xx *dev);
int em28xx_set_mode(struct em28xx *dev, enum em28xx_mode set_mode);
int em28xx_gpio_set(struct em28xx *dev, struct em28xx_reg_seq *gpio);
void em28xx_wake_i2c(struct em28xx *dev);
@@ -649,7 +654,7 @@ extern void em28xx_card_setup(struct em28xx *dev);
extern struct em28xx_board em28xx_boards[];
extern struct usb_device_id em28xx_id_table[];
extern const unsigned int em28xx_bcount;
-void em28xx_set_ir(struct em28xx *dev, struct IR_i2c *ir);
+void em28xx_register_i2c_ir(struct em28xx *dev);
int em28xx_tuner_callback(void *ptr, int component, int command, int arg);
void em28xx_release_resources(struct em28xx *dev);
generated by cgit v1.2.3 (git 2.25.1) at 2025-01-06 12:44:18 +0000