diff options
Diffstat (limited to 'linux/drivers/media/video/saa7164/saa7164-api.c')
| -rw-r--r-- | linux/drivers/media/video/saa7164/saa7164-api.c | 780 |
1 files changed, 780 insertions, 0 deletions
diff --git a/linux/drivers/media/video/saa7164/saa7164-api.c b/linux/drivers/media/video/saa7164/saa7164-api.c new file mode 100644 index 000000000..854a57f3a --- /dev/null +++ b/linux/drivers/media/video/saa7164/saa7164-api.c @@ -0,0 +1,780 @@ +/* + * Driver for the NXP SAA7164 PCIe bridge + * + * Copyright (c) 2009 Steven Toth <stoth@kernellabs.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. + */ + +#include <linux/wait.h> + +#include "saa7164.h" + +int saa7164_api_transition_port(struct saa7164_tsport *port, u8 mode) +{ + int ret; + + ret = saa7164_cmd_send(port->dev, port->hwcfg.unitid, SET_CUR, + SAA_STATE_CONTROL, sizeof(mode), &mode); + if (ret != SAA_OK) + printk(KERN_ERR "%s() error, ret = 0x%x\n", __func__, ret); + + return ret; +} + +int saa7164_api_get_fw_version(struct saa7164_dev *dev, u32 *version) +{ + int ret; + + ret = saa7164_cmd_send(dev, 0, GET_CUR, + GET_FW_VERSION_CONTROL, sizeof(u32), version); + if (ret != SAA_OK) + printk(KERN_ERR "%s() error, ret = 0x%x\n", __func__, ret); + + return ret; +} + +int saa7164_api_read_eeprom(struct saa7164_dev *dev, u8 *buf, int buflen) +{ + u8 reg[] = { 0x0f, 0x00 }; + + if (buflen < 128) + return -ENOMEM; + + /* Assumption: Hauppauge eeprom is at 0xa0 on on bus 0 */ + /* TODO: Pull the details from the boards struct */ + return saa7164_api_i2c_read(&dev->i2c_bus[0], 0xa0 >> 1, sizeof(reg), + ®[0], 128, buf); +} + +#if 0 +/* Exercise the i2c interface, saa7164_cmd()/bus() layers: + * 1. Read the identity byte from each of the demodulators. + * 2. Read the entire register set from the TDA18271. + * TODO: This function has no purpose other than to exercise i2c. + */ +int saa7164_api_test(struct saa7164_dev *dev) +{ + /* TDA10048 identities */ + u8 reg[] = { 0x00 }; + u8 data[256]; + dprintk(DBGLVL_API, "%s()\n", __func__); +#if 0 + /* Read the identity byte from the TDA10048 demodulators */ + saa7164_api_i2c_read(&dev->i2c_bus[1], 0x10 >> 1, + sizeof(reg), ®[0], 1, &data[0]); + saa7164_api_i2c_read(&dev->i2c_bus[2], 0x10 >> 1, + sizeof(reg), ®[0], 1, &data[0]); +#endif + /* Read all 39 bytes from the TDA18271 tuners */ + saa7164_api_i2c_read(&dev->i2c_bus[1], 0xc0 >> 1, 0, + ®[0], 39, &data[0]); + saa7164_api_i2c_read(&dev->i2c_bus[2], 0xc0 >> 1, 0, + ®[0], 39, &data[0]); + + return 0; +} +#endif + +int saa7164_api_configure_port_mpeg2ts(struct saa7164_dev *dev, + struct saa7164_tsport *port, + tmComResTSFormatDescrHeader_t *tsfmt) +{ + dprintk(DBGLVL_API, " bFormatIndex = 0x%x\n", tsfmt->bFormatIndex); + dprintk(DBGLVL_API, " bDataOffset = 0x%x\n", tsfmt->bDataOffset); + dprintk(DBGLVL_API, " bPacketLength= 0x%x\n", tsfmt->bPacketLength); + dprintk(DBGLVL_API, " bStrideLength= 0x%x\n", tsfmt->bStrideLength); + dprintk(DBGLVL_API, " bguid = (....)\n"); + + /* Cache the hardware configuration in the port */ + + port->bufcounter = port->hwcfg.BARLocation; + port->pitch = port->hwcfg.BARLocation + (2 * sizeof(u32)); + port->bufsize = port->hwcfg.BARLocation + (3 * sizeof(u32)); + port->bufoffset = port->hwcfg.BARLocation + (4 * sizeof(u32)); + port->bufptr32l = port->hwcfg.BARLocation + + (4 * sizeof(u32)) + + (sizeof(u32) * port->hwcfg.buffercount) + sizeof(u32); + port->bufptr32h = port->hwcfg.BARLocation + + (4 * sizeof(u32)) + + (sizeof(u32) * port->hwcfg.buffercount); + port->bufptr64 = port->hwcfg.BARLocation + + (4 * sizeof(u32)) + + (sizeof(u32) * port->hwcfg.buffercount); + dprintk(DBGLVL_API, " = port->hwcfg.BARLocation = 0x%x\n", + port->hwcfg.BARLocation); + + dprintk(DBGLVL_API, " = VS_FORMAT_MPEGTS (becomes dev->ts[%d])\n", + port->nr); + + return 0; +} + +int saa7164_api_dump_subdevs(struct saa7164_dev *dev, u8 *buf, int len) +{ + struct saa7164_tsport *port = 0; + u32 idx, next_offset; + int i; + tmComResDescrHeader_t *hdr, *t; + tmComResExtDevDescrHeader_t *exthdr; + tmComResPathDescrHeader_t *pathhdr; + tmComResAntTermDescrHeader_t *anttermhdr; + tmComResTunerDescrHeader_t *tunerunithdr; + tmComResDMATermDescrHeader_t *vcoutputtermhdr; + tmComResTSFormatDescrHeader_t *tsfmt; + u32 currpath = 0; + + dprintk(DBGLVL_API, + "%s(?,?,%d) sizeof(tmComResDescrHeader_t) = %d bytes\n", + __func__, len, (u32)sizeof(tmComResDescrHeader_t)); + + for (idx = 0; idx < (len - sizeof(tmComResDescrHeader_t)); ) { + + hdr = (tmComResDescrHeader_t *)(buf + idx); + + if (hdr->type != CS_INTERFACE) + return SAA_ERR_NOT_SUPPORTED; + + dprintk(DBGLVL_API, "@ 0x%x = \n", idx); + switch (hdr->subtype) { + case GENERAL_REQUEST: + dprintk(DBGLVL_API, " GENERAL_REQUEST\n"); + break; + case VC_TUNER_PATH: + dprintk(DBGLVL_API, " VC_TUNER_PATH\n"); + pathhdr = (tmComResPathDescrHeader_t *)(buf + idx); + dprintk(DBGLVL_API, " pathid = 0x%x\n", + pathhdr->pathid); + currpath = pathhdr->pathid; + break; + case VC_INPUT_TERMINAL: + dprintk(DBGLVL_API, " VC_INPUT_TERMINAL\n"); + anttermhdr = + (tmComResAntTermDescrHeader_t *)(buf + idx); + dprintk(DBGLVL_API, " terminalid = 0x%x\n", + anttermhdr->terminalid); + dprintk(DBGLVL_API, " terminaltype = 0x%x\n", + anttermhdr->terminaltype); + switch (anttermhdr->terminaltype) { + case ITT_ANTENNA: + dprintk(DBGLVL_API, " = ITT_ANTENNA\n"); + break; + case LINE_CONNECTOR: + dprintk(DBGLVL_API, " = LINE_CONNECTOR\n"); + break; + case SPDIF_CONNECTOR: + dprintk(DBGLVL_API, " = SPDIF_CONNECTOR\n"); + break; + case COMPOSITE_CONNECTOR: + dprintk(DBGLVL_API, + " = COMPOSITE_CONNECTOR\n"); + break; + case SVIDEO_CONNECTOR: + dprintk(DBGLVL_API, " = SVIDEO_CONNECTOR\n"); + break; + case COMPONENT_CONNECTOR: + dprintk(DBGLVL_API, + " = COMPONENT_CONNECTOR\n"); + break; + case STANDARD_DMA: + dprintk(DBGLVL_API, " = STANDARD_DMA\n"); + break; + default: + dprintk(DBGLVL_API, " = undefined (0x%x)\n", + anttermhdr->terminaltype); + } + dprintk(DBGLVL_API, " assocterminal= 0x%x\n", + anttermhdr->assocterminal); + dprintk(DBGLVL_API, " iterminal = 0x%x\n", + anttermhdr->iterminal); + dprintk(DBGLVL_API, " controlsize = 0x%x\n", + anttermhdr->controlsize); + break; + case VC_OUTPUT_TERMINAL: + dprintk(DBGLVL_API, " VC_OUTPUT_TERMINAL\n"); + vcoutputtermhdr = + (tmComResDMATermDescrHeader_t *)(buf + idx); + dprintk(DBGLVL_API, " unitid = 0x%x\n", + vcoutputtermhdr->unitid); + dprintk(DBGLVL_API, " terminaltype = 0x%x\n", + vcoutputtermhdr->terminaltype); + switch (vcoutputtermhdr->terminaltype) { + case ITT_ANTENNA: + dprintk(DBGLVL_API, " = ITT_ANTENNA\n"); + break; + case LINE_CONNECTOR: + dprintk(DBGLVL_API, " = LINE_CONNECTOR\n"); + break; + case SPDIF_CONNECTOR: + dprintk(DBGLVL_API, " = SPDIF_CONNECTOR\n"); + break; + case COMPOSITE_CONNECTOR: + dprintk(DBGLVL_API, + " = COMPOSITE_CONNECTOR\n"); + break; + case SVIDEO_CONNECTOR: + dprintk(DBGLVL_API, " = SVIDEO_CONNECTOR\n"); + break; + case COMPONENT_CONNECTOR: + dprintk(DBGLVL_API, + " = COMPONENT_CONNECTOR\n"); + break; + case STANDARD_DMA: + dprintk(DBGLVL_API, " = STANDARD_DMA\n"); + break; + default: + dprintk(DBGLVL_API, " = undefined (0x%x)\n", + vcoutputtermhdr->terminaltype); + } + dprintk(DBGLVL_API, " assocterminal= 0x%x\n", + vcoutputtermhdr->assocterminal); + dprintk(DBGLVL_API, " sourceid = 0x%x\n", + vcoutputtermhdr->sourceid); + dprintk(DBGLVL_API, " iterminal = 0x%x\n", + vcoutputtermhdr->iterminal); + dprintk(DBGLVL_API, " BARLocation = 0x%x\n", + vcoutputtermhdr->BARLocation); + dprintk(DBGLVL_API, " flags = 0x%x\n", + vcoutputtermhdr->flags); + dprintk(DBGLVL_API, " interruptid = 0x%x\n", + vcoutputtermhdr->interruptid); + dprintk(DBGLVL_API, " buffercount = 0x%x\n", + vcoutputtermhdr->buffercount); + dprintk(DBGLVL_API, " metadatasize = 0x%x\n", + vcoutputtermhdr->metadatasize); + dprintk(DBGLVL_API, " controlsize = 0x%x\n", + vcoutputtermhdr->controlsize); + dprintk(DBGLVL_API, " numformats = 0x%x\n", + vcoutputtermhdr->numformats); + + t = (tmComResDescrHeader_t *) + ((tmComResDMATermDescrHeader_t *)(buf + idx)); + next_offset = idx + (vcoutputtermhdr->len); + for (i = 0; i < vcoutputtermhdr->numformats; i++) { + t = (tmComResDescrHeader_t *) + (buf + next_offset); + switch (t->subtype) { + case VS_FORMAT_MPEG2TS: + tsfmt = + (tmComResTSFormatDescrHeader_t *)t; + if (currpath == 1) + port = &dev->ts1; + else + port = &dev->ts2; + memcpy(&port->hwcfg, vcoutputtermhdr, + sizeof(*vcoutputtermhdr)); + saa7164_api_configure_port_mpeg2ts(dev, + port, tsfmt); + break; + case VS_FORMAT_MPEG2PS: + dprintk(DBGLVL_API, + " = VS_FORMAT_MPEG2PS\n"); + break; + case VS_FORMAT_VBI: + dprintk(DBGLVL_API, + " = VS_FORMAT_VBI\n"); + break; + case VS_FORMAT_RDS: + dprintk(DBGLVL_API, + " = VS_FORMAT_RDS\n"); + break; + case VS_FORMAT_UNCOMPRESSED: + dprintk(DBGLVL_API, + " = VS_FORMAT_UNCOMPRESSED\n"); + break; + case VS_FORMAT_TYPE: + dprintk(DBGLVL_API, + " = VS_FORMAT_TYPE\n"); + break; + default: + dprintk(DBGLVL_API, + " = undefined (0x%x)\n", + t->subtype); + } + next_offset += t->len; + } + + break; + case TUNER_UNIT: + dprintk(DBGLVL_API, " TUNER_UNIT\n"); + tunerunithdr = + (tmComResTunerDescrHeader_t *)(buf + idx); + dprintk(DBGLVL_API, " unitid = 0x%x\n", + tunerunithdr->unitid); + dprintk(DBGLVL_API, " sourceid = 0x%x\n", + tunerunithdr->sourceid); + dprintk(DBGLVL_API, " iunit = 0x%x\n", + tunerunithdr->iunit); + dprintk(DBGLVL_API, " tuningstandards = 0x%x\n", + tunerunithdr->tuningstandards); + dprintk(DBGLVL_API, " controlsize = 0x%x\n", + tunerunithdr->controlsize); + dprintk(DBGLVL_API, " controls = 0x%x\n", + tunerunithdr->controls); + break; + case VC_SELECTOR_UNIT: + dprintk(DBGLVL_API, " VC_SELECTOR_UNIT\n"); + break; + case VC_PROCESSING_UNIT: + dprintk(DBGLVL_API, " VC_PROCESSING_UNIT\n"); + break; + case FEATURE_UNIT: + dprintk(DBGLVL_API, " FEATURE_UNIT\n"); + break; + case ENCODER_UNIT: + dprintk(DBGLVL_API, " ENCODER_UNIT\n"); + break; + case EXTENSION_UNIT: + dprintk(DBGLVL_API, " EXTENSION_UNIT\n"); + exthdr = (tmComResExtDevDescrHeader_t *)(buf + idx); + dprintk(DBGLVL_API, " unitid = 0x%x\n", + exthdr->unitid); + dprintk(DBGLVL_API, " deviceid = 0x%x\n", + exthdr->deviceid); + dprintk(DBGLVL_API, " devicetype = 0x%x\n", + exthdr->devicetype); + if (exthdr->devicetype & 0x1) + dprintk(DBGLVL_API, " = Decoder Device\n"); + if (exthdr->devicetype & 0x2) + dprintk(DBGLVL_API, " = GPIO Source\n"); + if (exthdr->devicetype & 0x4) + dprintk(DBGLVL_API, " = Video Decoder\n"); + if (exthdr->devicetype & 0x8) + dprintk(DBGLVL_API, " = Audio Decoder\n"); + if (exthdr->devicetype & 0x20) + dprintk(DBGLVL_API, " = Crossbar\n"); + if (exthdr->devicetype & 0x40) + dprintk(DBGLVL_API, " = Tuner\n"); + if (exthdr->devicetype & 0x80) + dprintk(DBGLVL_API, " = IF PLL\n"); + if (exthdr->devicetype & 0x100) + dprintk(DBGLVL_API, " = Demodulator\n"); + if (exthdr->devicetype & 0x200) + dprintk(DBGLVL_API, " = RDS Decoder\n"); + if (exthdr->devicetype & 0x400) + dprintk(DBGLVL_API, " = Encoder\n"); + if (exthdr->devicetype & 0x800) + dprintk(DBGLVL_API, " = IR Decoder\n"); + if (exthdr->devicetype & 0x1000) + dprintk(DBGLVL_API, " = EEPROM\n"); + if (exthdr->devicetype & 0x2000) + dprintk(DBGLVL_API, + " = VBI Decoder\n"); + if (exthdr->devicetype & 0x10000) + dprintk(DBGLVL_API, + " = Streaming Device\n"); + if (exthdr->devicetype & 0x20000) + dprintk(DBGLVL_API, + " = DRM Device\n"); + if (exthdr->devicetype & 0x40000000) + dprintk(DBGLVL_API, + " = Generic Device\n"); + if (exthdr->devicetype & 0x80000000) + dprintk(DBGLVL_API, + " = Config Space Device\n"); + dprintk(DBGLVL_API, " numgpiopins = 0x%x\n", + exthdr->numgpiopins); + dprintk(DBGLVL_API, " numgpiogroups = 0x%x\n", + exthdr->numgpiogroups); + dprintk(DBGLVL_API, " controlsize = 0x%x\n", + exthdr->controlsize); + break; + case PVC_INFRARED_UNIT: + dprintk(DBGLVL_API, " PVC_INFRARED_UNIT\n"); + break; + case DRM_UNIT: + dprintk(DBGLVL_API, " DRM_UNIT\n"); + break; + default: + dprintk(DBGLVL_API, "default %d\n", hdr->subtype); + } + + dprintk(DBGLVL_API, " 1.%x\n", hdr->len); + dprintk(DBGLVL_API, " 2.%x\n", hdr->type); + dprintk(DBGLVL_API, " 3.%x\n", hdr->subtype); + dprintk(DBGLVL_API, " 4.%x\n", hdr->unitid); + + idx += hdr->len; + } + + return 0; +} + +int saa7164_api_enum_subdevs(struct saa7164_dev *dev) +{ + int ret; + u32 buflen = 0; + u8 *buf; + + dprintk(DBGLVL_API, "%s()\n", __func__); + + /* Get the total descriptor length */ + ret = saa7164_cmd_send(dev, 0, GET_LEN, + GET_DESCRIPTORS_CONTROL, sizeof(buflen), &buflen); + if (ret != SAA_OK) + printk(KERN_ERR "%s() error, ret = 0x%x\n", __func__, ret); + + dprintk(DBGLVL_API, "%s() total descriptor size = %d bytes.\n", + __func__, buflen); + + /* Allocate enough storage for all of the descs */ + buf = kzalloc(buflen, GFP_KERNEL); + if (buf == NULL) + return SAA_ERR_NO_RESOURCES; + + /* Retrieve them */ + ret = saa7164_cmd_send(dev, 0, GET_CUR, + GET_DESCRIPTORS_CONTROL, buflen, buf); + if (ret != SAA_OK) { + printk(KERN_ERR "%s() error, ret = 0x%x\n", __func__, ret); + goto out; + } + + if (debug & DBGLVL_API) + saa7164_dumphex16(dev, buf, (buflen/16)*16); + + saa7164_api_dump_subdevs(dev, buf, buflen); + +out: + kfree(buf); + return ret; +} + +int saa7164_api_i2c_read(struct saa7164_i2c *bus, u8 addr, u32 reglen, u8 *reg, + u32 datalen, u8 *data) +{ + struct saa7164_dev *dev = bus->dev; + u16 len = 0; + int unitid; + u32 regval; + u8 buf[256]; + int ret; + + dprintk(DBGLVL_API, "%s()\n", __func__); + + if (reglen > 4) + return -EIO; + + if (reglen == 1) + regval = *(reg); + else + if (reglen == 2) + regval = ((*(reg) << 8) || *(reg+1)); + else + if (reglen == 3) + regval = ((*(reg) << 16) | (*(reg+1) << 8) | *(reg+2)); + else + if (reglen == 4) + regval = ((*(reg) << 24) | (*(reg+1) << 16) | + (*(reg+2) << 8) | *(reg+3)); + + /* Prepare the send buffer */ + /* Bytes 00-03 source register length + * 04-07 source bytes to read + * 08... register address + */ + memset(buf, 0, sizeof(buf)); + memcpy((buf + 2 * sizeof(u32) + 0), reg, reglen); + *((u32 *)(buf + 0 * sizeof(u32))) = reglen; + *((u32 *)(buf + 1 * sizeof(u32))) = datalen; + + unitid = saa7164_i2caddr_to_unitid(bus, addr); + if (unitid < 0) { + printk(KERN_ERR + "%s() error, cannot translate regaddr 0x%x to unitid\n", + __func__, addr); + return -EIO; + } + + ret = saa7164_cmd_send(bus->dev, unitid, GET_LEN, + EXU_REGISTER_ACCESS_CONTROL, sizeof(len), &len); + if (ret != SAA_OK) { + printk(KERN_ERR "%s() error, ret(1) = 0x%x\n", __func__, ret); + return -EIO; + } + + dprintk(DBGLVL_API, "%s() len = %d bytes\n", __func__, len); + + if (debug & DBGLVL_I2C) + saa7164_dumphex16(dev, buf, 2 * 16); + + ret = saa7164_cmd_send(bus->dev, unitid, GET_CUR, + EXU_REGISTER_ACCESS_CONTROL, len, &buf); + if (ret != SAA_OK) + printk(KERN_ERR "%s() error, ret(2) = 0x%x\n", __func__, ret); + else { + if (debug & DBGLVL_I2C) + saa7164_dumphex16(dev, buf, sizeof(buf)); + memcpy(data, (buf + 2 * sizeof(u32) + reglen), datalen); + } + + return ret == SAA_OK ? 0 : -EIO; +} + +/* For a given 8 bit i2c address device, write the buffer */ +int saa7164_api_i2c_write(struct saa7164_i2c *bus, u8 addr, u32 datalen, + u8 *data) +{ + struct saa7164_dev *dev = bus->dev; + u16 len = 0; + int unitid; + int reglen; + u8 buf[256]; + int ret; + + dprintk(DBGLVL_API, "%s()\n", __func__); + + if ((datalen == 0) || (datalen > 232)) + return -EIO; + + memset(buf, 0, sizeof(buf)); + + unitid = saa7164_i2caddr_to_unitid(bus, addr); + if (unitid < 0) { + printk(KERN_ERR + "%s() error, cannot translate regaddr 0x%x to unitid\n", + __func__, addr); + return -EIO; + } + + reglen = saa7164_i2caddr_to_reglen(bus, addr); + if (unitid < 0) { + printk(KERN_ERR + "%s() error, cannot translate regaddr to reglen\n", + __func__); + return -EIO; + } + + ret = saa7164_cmd_send(bus->dev, unitid, GET_LEN, + EXU_REGISTER_ACCESS_CONTROL, sizeof(len), &len); + if (ret != SAA_OK) { + printk(KERN_ERR "%s() error, ret(1) = 0x%x\n", __func__, ret); + return -EIO; + } + + dprintk(DBGLVL_API, "%s() len = %d bytes\n", __func__, len); + + /* Prepare the send buffer */ + /* Bytes 00-03 dest register length + * 04-07 dest bytes to write + * 08... register address + */ + *((u32 *)(buf + 0 * sizeof(u32))) = reglen; + *((u32 *)(buf + 1 * sizeof(u32))) = datalen - reglen; + memcpy((buf + 2 * sizeof(u32)), data, datalen); + + if (debug & DBGLVL_I2C) + saa7164_dumphex16(dev, buf, sizeof(buf)); + + ret = saa7164_cmd_send(bus->dev, unitid, SET_CUR, + EXU_REGISTER_ACCESS_CONTROL, len, &buf); + if (ret != SAA_OK) + printk(KERN_ERR "%s() error, ret(2) = 0x%x\n", __func__, ret); + + return ret == SAA_OK ? 0 : -EIO; +} + +#if 0 +int saa7164_api_dif_write(struct saa7164_i2c *bus, u8 addr, + u32 datalen, u8 *data) +{ + struct saa7164_dev *dev = bus->dev; + u16 len = 0; + int unitid; + int reglen; + u8 buf[256]; + int ret; + + dprintk(DBGLVL_API, "%s()\n", __func__); + + if ((datalen == 0) || (datalen > 232)) + return -EIO; + + memset(buf, 0, sizeof(buf)); + + unitid = saa7164_i2caddr_to_unitid(bus, addr); + if (unitid < 0) { + printk(KERN_ERR + "%s() error, cannot translate regaddr 0x%x to unitid\n", + __func__, addr); +#if 0 + return -EIO; +#endif + } + + reglen = saa7164_i2caddr_to_reglen(bus, addr); + if (unitid < 0) { + printk(KERN_ERR + "%s() error, cannot translate regaddr to reglen\n", + __func__); +#if 0 + return -EIO; +#endif + } +#if 0 + ret = saa7164_cmd_send(bus->dev, unitid, GET_LEN, + EXU_REGISTER_ACCESS_CONTROL, sizeof(len), &len); +#else + ret = saa7164_cmd_send(bus->dev, 3, GET_LEN, + EXU_REGISTER_ACCESS_CONTROL, sizeof(len), &len); +#endif + if (ret != SAA_OK) { + printk(KERN_ERR "%s() error, ret(1) = 0x%x\n", __func__, ret); + return -EIO; + } + + dprintk(DBGLVL_API, "%s() len = %d bytes\n", __func__, len); + dprintk(32, "%s() len = %d bytes\n", __func__, len); + + /* Prepare the send buffer */ + /* Bytes 00-03 dest register length + * 04-07 dest bytes to write + * 08... register address + */ +#if 1 + buf[0] = 0x04; + buf[1] = 0x00; + buf[2] = 0x00; + buf[3] = 0x00; + buf[4] = 0x04; + buf[5] = 0x00; + buf[6] = 0x00; + buf[7] = 0x00; + memcpy((buf + 2 * sizeof(u32)), data, datalen); +#else + *((u32 *)(buf + 0 * sizeof(u32))) = reglen; + *((u32 *)(buf + 1 * sizeof(u32))) = datalen - reglen; + memcpy((buf + 2 * sizeof(u32)), data, datalen); +#endif + + if (debug & DBGLVL_I2C) + saa7164_dumphex16(dev, buf, sizeof(buf)); +#if 0 + ret = saa7164_cmd_send(bus->dev, unitid, SET_CUR, + EXU_REGISTER_ACCESS_CONTROL, len, &buf); +#else + ret = saa7164_cmd_send(bus->dev, 3, SET_CUR, + EXU_REGISTER_ACCESS_CONTROL, len, &buf); +#endif + if (ret != SAA_OK) + printk(KERN_ERR "%s() error, ret(2) = 0x%x\n", + __func__, ret); + + return ret == SAA_OK ? 0 : -EIO; +} +#endif + +int saa7164_api_modify_gpio(struct saa7164_dev *dev, u8 unitid, + u8 pin, u8 state) +{ + int ret; + tmComResGPIO_t t; + + dprintk(DBGLVL_API, "%s(0x%x, %d, %d)\n", + __func__, unitid, pin, state); + + if ((pin > 7) || (state > 2)) + return SAA_ERR_BAD_PARAMETER; + + t.pin = pin; + t.state = state; + + ret = saa7164_cmd_send(dev, unitid, SET_CUR, + EXU_GPIO_CONTROL, sizeof(t), &t); + if (ret != SAA_OK) + printk(KERN_ERR "%s() error, ret = 0x%x\n", + __func__, ret); + + return ret; +} + +int saa7164_api_set_gpiobit(struct saa7164_dev *dev, u8 unitid, + u8 pin) +{ + return saa7164_api_modify_gpio(dev, unitid, pin, 1); +} + +int saa7164_api_clear_gpiobit(struct saa7164_dev *dev, u8 unitid, + u8 pin) +{ + return saa7164_api_modify_gpio(dev, unitid, pin, 0); +} + +#if 0 +int saa7164_api_setif(struct saa7164_dev *dev, u8 reg, u8 unitid, + u8 val, u8 mas) +{ + u16 len = 0; + u8 buf[256]; + int ret; + + dprintk(DBGLVL_API, "%s()\n", __func__); + + memset(buf, 0, sizeof(buf)); + + buf[0x00] = 0x04; + buf[0x01] = 0x00; + buf[0x02] = 0x00; + buf[0x03] = 0x00; + + buf[0x04] = 0x04; + buf[0x05] = 0x00; + buf[0x06] = 0x00; + buf[0x07] = 0x00; + + buf[0x08] = reg; + buf[0x09] = 0x26; + buf[0x0a] = mas; + buf[0x0b] = 0xb0; + + buf[0x0c] = val; + buf[0x0d] = 0x00; + buf[0x0e] = 0x00; + buf[0x0f] = 0x00; + + ret = saa7164_cmd_send(dev, unitid, GET_LEN, + EXU_REGISTER_ACCESS_CONTROL, sizeof(len), &len); + if (ret != SAA_OK) { + printk(KERN_ERR "%s() error, ret(1) = 0x%x\n", __func__, ret); + return -EIO; + } + + dprintk(DBGLVL_API, "%s() len = %d bytes\n", __func__, len); + + ret = saa7164_cmd_send(dev, unitid, SET_CUR, + EXU_REGISTER_ACCESS_CONTROL, len, &buf); + if (ret != SAA_OK) + printk(KERN_ERR "%s() error, ret(2) = 0x%x\n", __func__, ret); + + saa7164_dumphex16(dev, buf, 16); + + return ret == SAA_OK ? 0 : -EIO; +} +#endif + +#if 0 +/* Disable the IF block AGC controls */ +int saa7164_api_agc(struct saa7164_dev *dev) +{ + saa7164_api_setif(dev, 0x00, 0x03, 0x02, 0xd0); + saa7164_api_setif(dev, 0x48, 0x03, 0xa0, 0xd0); + saa7164_api_setif(dev, 0xc0, 0x03, 0x01, 0xd0); + saa7164_api_setif(dev, 0x7c, 0x03, 0x04, 0xd0); + saa7164_api_setif(dev, 0x04, 0x03, 0x00, 0xd0); + return 0; +} +#endif + |